Scribd Logo
Upload

Welcome to Scribd!

  • 66 views

    Z-CARB MD SpeedFeed

    Uploaded by

    alphatools
    The document provides speed and feed recommendations for different types of machining operations based on the material hardness and tool diameter. It gives recommended speeds in surface feet per minute or meters per minute and feeds in inches or millimeters per tooth. The operations covered are slotting, profiling, and high speed profiling. Speeds and feeds decrease as material hardness increases from 30-45 HRc to over 55 HRc. Smaller tool diameters use lower feeds across operations.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Z-CARB MD SpeedFeed

    Uploaded by

    alphatools
    66 views1 page
    The document provides speed and feed recommendations for different types of machining operations based on the material hardness and tool diameter. It gives recommended speeds in surface feet per minute or meters per minute and feeds in inches or millimeters per tooth. The operations covered are slotting, profiling, and high speed profiling. Speeds and feeds decrease as material hardness increases from 30-45 HRc to over 55 HRc. Smaller tool diameters use lower feeds across operations.

    Original Title

    Z-CARB_MD_SpeedFeed

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides speed and feed recommendations for different types of machining operations based on the material hardness and tool diameter. It gives recommended speeds in surface feet per minute or meters per minute and feeds in inches or millimeters per tooth. The operations covered are slotting, profiling, and high speed profiling. Speeds and feeds decrease as material hardness increases from 30-45 HRc to over 55 HRc. Smaller tool diameters use lower feeds across operations.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    66 views1 page

    Z-CARB MD SpeedFeed

    Uploaded by

    alphatools
    The document provides speed and feed recommendations for different types of machining operations based on the material hardness and tool diameter. It gives recommended speeds in surface feet per minute or meters per minute and feeds in inches or millimeters per tooth. The operations covered are slotting, profiling, and high speed profiling. Speeds and feeds decrease as material hardness increases from 30-45 HRc to over 55 HRc. Smaller tool diameters use lower feeds across operations.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Speed and Feed Recommendations

    Steels 30-45 HRc Steels >45-55 HRc Steels >55-60 HRc


    Rw 1xD Rw 1xD Rw 1xD
    Slotting Ad ≤ .5xD Ad ≤ .5xD Ad ≤ .3xD
    215 sfm 65 m / min 120 sfm 36 m / min 65 sfm 20 m / min
    Diameter (D) in / tooth mm / tooth in / tooth mm / tooth in / tooth mm / tooth
    1/8 3mm 0.0006 0.02 0.0005 0.01 0.0004 0.01
    3/16 5mm 0.0009 0.02 0.0008 0.02 0.0006 0.02
    1/4 6mm 0.0013 0.03 0.0010 0.03 0.0008 0.02
    5/16 8mm 0.0016 0.04 0.0013 0.03 0.0009 0.02
    3/8 10mm 0.0019 0.05 0.0015 0.04 0.0011 0.03
    7/16 0.0022 0.06 0.0018 0.05 0.0013 0.03
    1/2 12mm 0.0025 0.06 0.0020 0.05 0.0015 0.04
    5/8 16mm 0.0031 0.08 0.0025 0.06 0.0019 0.05
    3/4 20mm 0.0038 0.10 0.0030 0.08 0.0023 0.06

    Steels 30-45 HRc Steels >45-55 HRc Steels >55-60 HRc


    Rw ≤ .5xD Rw ≤ .5xD Rw ≤ .3xD
    Profiling Ad ≤ 1xD Ad ≤ 1xD Ad ≤ 1xD
    265 sfm 80 m / min 150 sfm 45 m / min 80 sfm 24 m / min
    Diameter (D) in / tooth mm / tooth in / tooth mm / tooth in / tooth mm / tooth
    1/8 3mm 0.0009 0.02 0.0007 0.02 0.0005 0.01
    3/16 5mm 0.0013 0.03 0.0011 0.03 0.0008 0.02
    1/4 6mm 0.0018 0.05 0.0014 0.04 0.0011 0.03
    5/16 8mm 0.0022 0.06 0.0018 0.05 0.0013 0.03
    3/8 10mm 0.0026 0.07 0.0021 0.05 0.0016 0.04
    7/16 0.0031 0.08 0.0026 0.07 0.0018 0.05
    1/2 12mm 0.0035 0.09 0.0028 0.07 0.0021 0.05
    5/8 16mm 0.0044 0.11 0.0035 0.09 0.0026 0.07
    3/4 20mm 0.0053 0.13 0.0042 0.11 0.0032 0.08

    Steels 30-45 HRc Steels >45-55 HRc Steels >55-60 HRc


    High Speed Rw ≤ .1xD Rw ≤ .1xD Rw ≤ .1xD
    Ad ≤ .1xD Ad ≤ .1xD Ad ≤ .1xD
    Profiling
    560 sfm 170 m / min 490 sfm 150 m / min 250 sfm 75 m / min
    Diameter (D) in / tooth mm / tooth in / tooth mm / tooth in / tooth mm / tooth
    1/8 3mm 0.0011 0.03 0.0009 0.02 0.0006 0.02
    3/16 5mm 0.0017 0.04 0.0013 0.03 0.0009 0.02
    1/4 6mm 0.0022 0.06 0.0018 0.05 0.0013 0.03
    5/16 8mm 0.0028 0.07 0.0022 0.06 0.0016 0.04
    3/8 10mm 0.0033 0.08 0.0026 0.07 0.0019 0.05
    7/16 0.0039 0.10 0.0031 0.08 0.0022 0.06
    1/2 12mm 0.0044 0.11 0.0035 0.09 0.0025 0.06
    5/8 16mm 0.0055 0.14 0.0044 0.11 0.0031 0.08
    3/4 20mm 0.0066 0.17 0.0053 0.13 0.0038 0.10

    Radial Width of Cut (Rw) Axial Depth of Cut (Ad) Tool Diameter (D)

    WWW.SGSTOOL.COM 17

    You might also like