THREADING TOOLS

HIGH SPEED STEEL FOR QUALITY AND SERVICE

SPIRAL POINT:
For machine use only. Manufactured with a tough design for tapping through holes. These taps have a blue steam temper finish.
STRAIGHT FLUTE:
This general purpose tap is suitable for machine or hand use, and available with either taper, second or plug lead.
SPIRAL FLUTE:
For machine use only. Designed primarily for tapping blind holes. The right-hand spiral assists swarf removal.
LONG SHANK:
Straight flute taps with longer shanks. Suitable for deep-hole or other long-reach tapping applications.
 GROUND THREAD TAPS
HIGH SPEED STEEL

ISO METRIC | COARSE

NOM. DIA. SHORT MACHINE TAPS ISO LONG
AND STRAIGHT SPIRAL SPIRAL LEFT SHANK The extensive range of ground
PITCH MM FLUTE POINT FLUTE HAND MACHINE TAPS thread taps is manufactured
AVAILABILITY from quality high speed steel to
M1.6 x 0.35 • •
M1.8 x 0.35 • • internationally recognised ISO
M2 x 0.4 • • • • standards, ensuring both high
M2.2 x 0.45 • •
M2.5 x 0.45 • • •
performance and long tool life.
M3 x 0.5 • • • • •
M3.5 x 0.6 • • •
M4 x 0.7 • • • • •
M4.5 x 0.75 • • • UNC/NC
M5 x 0.8 • • • • •
M6 x 1 • • • • •
SHORT MACHINE TAPS ISO LONG
NOM. DIA. STRAIGHT SPIRAL SPIRAL LEFT SHANK
M7 x 1 • • • •
AND TPI FLUTE POINT FLUTE HAND MACHINE TAPS
M8 x 1.25 • • • • •
AVAILABILITY
M9 x 1.25 • •
M10 x 1.5 • • • • • No. 1 x 64 • •
M11 x 1.5 • • No .2 x 56 • •
M12 x 1.75 • • • • • No. 3 x 48 • •
M14 x 2 • • • • • No. 4 x 40 • • •
M16 x 2 • • • • • No. 5 x 40 • • •
M18 x 2.5 • • • • • No. 6 x 32 • • •
M20 x 2.5 • • • • • No. 8 x 32 • • •
M22 x 2.5 • • • • • No.10 x 24 • • •
M24 x 3 • • • • • No.12 x 24 • • •
M27 x 3 • 1/4 x 20 • • • • •
M30 x 3.5 • 5/16 x 18 • • • • •
M33 x 3.5 • 3/8 x 16 • • • • •
M36 x 4 • 7/16 x 14 • • • • •
M39 x 4 • 1/2 x 13 • • • • •
M42 x 4.5 • 9/16 x 12 • • • • •
M45 x 4.5 • 5/8 x 11 • • • • •
M48 x 5 • 3/4 x 10 • • • • •
M52 x 5 • 7/8 x 9 • • • • •
M56 x 5.5 • 1x8 • • • • •
M60 x 5.5 • 1.1/8 x 7 •
M64 x 6 • 1.1/4 x 7 •
M68 x 6 • 1.3/8 x 6 •
M72 x 6 • 1.1/2 x 6 •
1.3/4 x 5 •
2 x 4.1/2 •
ISO METRIC | FINE Larger sizes on application.
NOM. DIA.
AND STRAIGHT SPIRAL SPIRAL UNF/NF
PITCH MM FLUTE POINT FLUTE
SHORT MACHINE TAPS ISO LONG
AVAILABILITY
NOM. DIA. STRAIGHT SPIRAL SPIRAL LEFT SHANK
M3 x 0.35 • AND TPI FLUTE POINT FLUTE HAND MACHINE TAPS
M3 x 0.6 •
AVAILABILITY
M3.5 x 0.35 •
No. 0 x 80 • •
M4 x 0.5 • • •
No. 1 x 72 • •
M4.5 x 0.5 •
No. 2 x 64 • •
M5 x 0.5 • • •
No. 3 x 56 • •
M5.5 x 0.9 •
No. 4 x 48 • • •
M6 x 0.75 • • •
No. 5 x 44 • • •
M7 x 0.75 •
No. 6 x 40 • • •
M8 x 0.75 •
No. 8 x 36 • • •
M8 x 1 • • •
No. 10 x 32 • • •
M9 x 1 •
No.12 x 28 • • •
M10 x 0.75 •
1/4 x 28 • • • • •
M10 x 1++ • • •
5/16 x 24 • • • • •
M10 x 1.25 • • •
3/8 x 24 • • • • •
M12 x 1 •
7/16 x 20 • • • • •
M12 x 1.25++ • • •
1/2 x 20 • • • • •
M12 x 1.5 • • •
9/16 x 18 • • • • •
M14 x 1 •
5/8 x 18 • • • • •
M14 x 1.25++ • • •
3/4 x 16 • • • • •
M14 x 1.5 • • •
7/8 x 14 • • • • •
M16 x 1 •
1 x 12 • • • • •
M16 x 1.5+ • • •
1.1/8 x 12 •
M18 x 1 •
1.1/4 x 12 •
M18 x 1.5++ • • •
1.3/8 x 12 •
M18 x 2 •
1.1/2 x 12 •
M20 x 1 •
M20 x 1.5+ • • • Larger sizes on application.
M20 x 2 •
M22 x 1.5 • • • Metric Fine Left Hand and Long Shank
available on request.
AMERICAN UNIFIED 8 THREAD SERIES (8 UN)
M24 x 1.5 • •
M24 x 2 • + Metric Conduit. NOM. DIA. AND TPI STRAIGHT FLUTE AVAILABILITY
++Spark Plug. 1.1/8 x 8 •
M25 x 1.5+ •
M27 x 1.5 • 1.1/4 x 8 •
M27 x 2 • 1.3/8 x 8 •
1.1/2 x 8 •
M30 x 1.5 •
1.5/8 x 8 •
M30 x 2 • 1.3/4 x 8 •
M32 x 1.5+ • 1.7/8 x 8 •
M33 x 2 • 2x8 •
M40 x 1.5++ •
37
 GROUND THREAD TAPS
HIGH SPEED STEEL

BSW | BRITISH STANDARD WHITWORTH

NOM. DIA. SHORT MACHINE TAPS ISO LONG
The extensive range of ground AND STRAIGHT SPIRAL SPIRAL LEFT SHANK
thread taps is manufactured PITCH BSW FLUTE POINT FLUTE HAND MACHINE TAPS
from quality high speed steel, AVAILABILITY
1/16 x 60 •
ensuring both high 3/32 x 48 •
performance and long tool life. 1/8 x 40 • • • •
5/32 x 32 • • •
3/16 x 24 • • • •
7/32 x 24 • • •
1/4 x 20 • • • • •
9/32 x 20 •
5/16 x 18 • • • • •
BSP | BRITISH STANDARD PIPE | ISO ‘G’ SERIES 3/8 x 16 • • • • •
7/16 x 14 • • • • •
SHORT MACHINE TAPS LONG
1/2 x 12 • • • • •
NOM. DIA. STRAIGHT SPIRAL SPIRAL LEFT SHANK
AND TPI FLUTE POINT FLUTE HAND MACHINE TAPS 9/16 12 • • • •
5/8 x 11 • • • •
AVAILABILITY
11/16 x 11 •
1/8 x 28 • • • • •
3/4 x 10 • • • •
1/4 x 19 • • • • •
13/16 x 10 •
3/8 x 19 • • • • •
7/8 x 9 • • • •
1/2 x 14 • • • • •
15/16 x 9 •
5/8 x 14 •
1x8 • • • •
3/4 x 14 • • • •
1.1/8 x 7 •
7/8 x 14 •
1.1/4 x 7 •
1 x 11 • •
1.3/8 x 6 •
1.1/8 x 11 •
1.1/2 x 6 •
1.1/4 x 11 •
1.5/8 x 5 •
1.1/2 x 11 •
1.3/4 x 5 •
1.3/4 x 11 •
1.7/8 x 4.1/2 •
2 x 11 •
2 x 4.1/2 •
2.1/4 x 11 •
2.1/4 x 4 •
2.1/2 x 11 •
2.1/2 x 4 •
2.3/4 x 11 •
2.3/4 x 3.1/2 •
3 x 11 •
3 x 3.1/2 •
3.1/2 x 11 •
4 x 11 •

NPT/API BSPT BSF | BRITISH STANDARD FINE

AMERICAN NATIONAL PIPE TAPER BRITISH STANDARD PIPE TAPER NOM. DIA. SHORT MACHINE TAPS ISO LONG
ISO ‘RC’ SERIES AND STRAIGHT SPIRAL SPIRAL LEFT SHANK
NOMINAL DIAMETER STRAIGHT
& TPI FLUTE NOMINAL DIAMETER STRAIGHT PITCH BSF FLUTE POINT FLUTE HAND MACHINE TAPS
AVAILABILITY
& TPI FLUTE AVAILABILITY
AVAILABILITY 3/16 x 32 • • • •
1/16 x 27 •
1/8 x 27 • 1/8 x 28 • 7/32 x 28 • •
1/4 x 18 • 1/4 x 19 • 1/4 x 26 • • • • •
3/8 x 18 • 3/8 x 19 • 9/32 x 26 •
1/2 x 14 • 1/2 x 14 • 5/16 x 22 • • • • •
3/4 x 14 • 3/4 x 14 • 3/8 x 20 • • • • •
1 x 11.1/2 • 1 x 11 • 7/16 x 18 • • • • •
1.1/4 x 11.1/2 • 1.1/4 x 11 • 1/2 x 16 • • • • •
1.1/2 x 11.1/2 • 1.1/2 x 11 • 9/16 x 16 • • • •
2 x 11.1/2 • 2 x 11 • 5/8 x 14 • • • •
11/16 x 14 •
NPTF METRIC CONDUIT 3/4 x12 • • • •
AMERICAN NATIONAL PIPE TAPER - DRYSEAL 13/16 x 12 •
NOMINAL DIAMETER STRAIGHT 7/8 x 11 • • • •
NOMINAL DIAMETER STRAIGHT & TPI FLUTE 15/16 x 11 •
& TPI FLUTE AVAILABILITY 1 x 10 • • • •
AVAILABILITY M16 x 1.5 • 1.1/8 x 9 •
1/16 x 27 • M20 x 1.5 • 1.1/4 x 9 •
1/8 x 27 • M25 x 1.5 • 1.3/8 x 8 •
1/4 x 18 • M32 x 1.5 • 1.1/2 x 8 •
3/8 x 18 • M40 x 1.5 • 1.5/8 x 8 •
1/2 x 14 •
1.3/4 x 7 •
3/4 x 14
1 x 11.1/2
•
•
BS CONDUIT 2x7 •
1.1/4 x 11.1/2 • NOMINAL DIAMETER STRAIGHT 2.1/4 x 6 •
& TPI FLUTE 2.1/2 x 6 •
NPS AVAILABILITY
1/2 x 18 •
AMERICAN NATIONAL PIPE STRAIGHT
5/8 x 18 • BA | BRITISH ASSOCIATION BS | BRASS
NOMINAL DIAMETER STRAIGHT
3/4 x 16 • BA SHORT MACHINE TAPS NOM. DIA. STRAIGHT
& TPI FLUTE
1 x 16 • SIZE STRAIGHT SPIRAL SPIRAL LEFT & TPI FLUTE
AVAILABILITY 1.1/4 x 16 •
1/8 x 27 • NO. FLUTE POINT FLUTE HAND AVAILABILITY
1.1/2 x 14 •
1/4 x 18 • AVAILABILITY 1/4 x 26 •
2 x 14 •
3/8 x 18 • 0 • • • • 5/16 x 26 •
1/2 x 14 • 1 • • • 3/8 x 26 •
3/4 x 14 • PG 2 • • • • 7/16 x 26 •
1 x 11.1/2 • 3 • • • 1/2 x 26 •
SIZE STRAIGHT 9/16 x 26 •
FLUTE 4 • • • •
5 • • • 5/8 x 26 •
AVAILABILITY 6 • • • 3/4 x 26 •
PG7 • 7 • • 7/8 x 26 •
PG9 • 8 • • • 1 x 26 •
PG11 • 9 • •
PG13.5 • 10 • • •
PG16 •

38
 GROUND THREAD TAPS
KITS | SETS

MINI TAP KITS SPIRAL POINT

Each kit contains: one HSSGT Spiral Point Tap of each size.
KIT REF THREAD RANGE
TK 40SP 3, 4, 5, 6, 8, 10, 12mm Metric Coarse
TK 41SP 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 BSW
TK 42SP 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 BSF
TK 43SP No.8, No.10, 1/4, 5/16, 3/8, 7/16, 1/2 UNC
TK 44SP No.8, No.10, 1/4, 5/16, 3/8, 7/16, 1/2 UNF

SPIRAL FLUTE
Each kit contains: one HSSGT Spiral Flute Tap of each size.
KIT REF THREAD RANGE
TK 50SF 3, 4, 5, 6, 8, 10, 12mm Metric Coarse
TK 51SF 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 BSW
TK 52SF 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 BSF
TK 53SF No.8, No.10, 1/4, 5/16, 3/8, 7/16, 1/2 UNC
TK 54SF No.8, No.10, 1/4, 5/16, 3/8, 7/16, 1/2 UNF

PAIRS TAP INDEX SETS

Each kit contains: one HSSGT Straight Flute, Taper and Plug Lead Tap of each size.
KIT REF THREAD RANGE
TK 1 PR 3, 4, 5, 6, 8, 10mm Metric Coarse
TK 2 PR 3, 4, 5, 6, 8, 10mm Metric Fine (10 x 1.25)
TK 3 PR 1/8, 3/16, 1/4, 5/16, 3/8, BSW
TK 4 PR No.8, No.10, 1/4, 5/16, 3/8 UNC
TK 5 PR No.8, No.10, 1/4, 5/16, 3/8 UNF

TAPER LEAD
Each kit contains: one HSSGT Straight Flute Tap and Taper Lead of each size.
KIT REF THREAD RANGE
TK 10T 3, 4, 5, 6, 8, 10, 12mm Metric Coarse
TK 11T 3, 4, 5, 6, 8, 10, 12mm Metric Fine
TK 12T 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 BSW
TK 13T 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 BSF
TK 14T No.8, No.10, 1/4, 5/16, 3/8, 7/16, 1/2 UNC
TK 15T No.8, No.10, 1/4, 5/16, 3/8, 7/16, 1/2 UNF

SECOND LEAD
Each kit contains: one HSSGT Straight Flute Tap and Second Lead of each size.
KIT REF THREAD RANGE
TK 20S 3, 4, 5, 6, 8, 10, 12mm Metric Coarse
TK 21S 3, 4, 5, 6, 8, 10, 12mm Metric Fine
HSSGT TAPS IN METAL CASSETTE INDEX
TK 22S 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 BSW Contains: Taper, Second and Bottoming HSSGT Taps in quality metal cassette index.
TK 23S 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 BSF SET REF THREAD RANGE
TK 24S No.8, No.10, 1/4, 5/16, 3/8, 7/16, 1/2 UNC TI 1 3, 4, 5, 6, 8, 10, 12mm (Coarse)
TK 25S No.8, No.10, 1/4, 5/16, 3/8, 7/16, 1/2 UNF TI 2 10, 1/4, 5/16, 3/8, 7/16, 1/2 UNF
TI 3 10, 1/4, 5/16, 3/8, 7/16, 1/2 UNC
TI 4 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 BSF
PLUG LEAD TI 5 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 BSW
Each kit contains: one HSSGT Straight Flute Tap and Plug Lead of each size.
KIT REF THREAD RANGE
TK 30P 3, 4, 5, 6, 8, 10, 12mm Metric Coarse
TK 31P 3, 4, 5, 6, 8, 10, 12mm Metric Fine
TK 32P 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 BSW
TK 33P 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 BSF
TK 34P No.8, No.10, 1/4, 5/16, 3/8, 7/16, 1/2 UNC
TK 35P No.8, No.10, 1/4, 5/16, 3/8, 7/16, 1/2 UNF

39
 GROUND THREAD TAPS
SETS | WRENCHES

CASED SETS OF HSSGT TAPS WITH HSS SPLIT THREAD: BSP

CIRCULAR DIES, INCLUDING WRENCHES AND STOCKS SET REF RANGE DIAMETER OF DIES TAPWRENCH
IN INCHES NO.
SC /61 1/8, 1/4, 3/8, 1/2, 3/4, 1 1 - 1.1/2 - 2 - 2.1/4 (ATW 3&4)
Each set in polished wood SC /62 1.1/4, 1.1/2, 2 4 (ATW 5)
case contains: HSS Die,
HSSGT Taper and THREAD: BSPT
Bottoming Tap per size. SET REF RANGE DIAMETER OF DIES TAPWRENCH
IN INCHES NO.
Tap Wrench and Diestock
SC /71 1/8, 1/4, 3/8, 1/2, 3/4, 1 1 - 1.1/2 - 2 - 2.1/4 (ATW 3&4)
to suit. Screwdriver for SC /72 1.1/4, 1.1/2, 2 4 (ATW5)
Diestock adjustment.
THREAD: NPT
SET REF RANGE DIAMETER OF DIES TAPWRENCH
THREAD: METRIC ISO COARSE IN INCHES NO.
SC /81 1/8, 1/4, 3/8, 1/2, 3/4, 1 1 - 1.1/2 - 2 - 2.1/4 (ATW 3&4)
SET REF THREADING SIZE DIAMETER OF DIES TAPWRENCH SC /82 1.1/4, 1.1/2, 2 4 (ATW5)
IN MILLIMETRES IN INCHES NO.
SC /1 2, 2.5, 3, 3.5, 4, 5, 6 13/16 (ATW0)
SC /2 3, 4, 5, 6, 8, 10, 12 13/16 - 1.5/16 (ATW1)
SC /3
SC /4
6, 7, 8, 9, 10, 11, 12
6, 7, 8, 9, 10, 12, 14, 16, 18, 20
13/16 - 1.5/16
1 - 1.5/16 - 1.1/2
(ATW1)
(ATW3)
TAP WRENCHES
SC /5 14, 16, 18, 20 1.1/2 - 2 (ATW4) Available in sizes to cover the whole range of Taps and Dies.

THREAD: METRIC ISO FINE Types: ATW0, ATW1

SET REF THREADING SIZE DIAMETER OF DIES TAPWRENCH
IN MILLIMETRES IN INCHES NO.
SC /6 3, 4, 5, 6, 8, 10, 12 13/16 - 1.5/16 (ATW1)
SC /7 6, 7, 8, 9, 10, 12, 14, 16, 18 13/16 - 1.5/16 - 1.1/2 (ATW3)
Types: ATW2 - ATW5

THREAD: UNC/NC
SET REF THREADING SIZE DIAMETER OF DIES TAPWRENCH
IN INCHES IN INCHES NO.
SC /11 5, 10, 1/4, 5/16, 3/8, 7/16, 1/2 13/16 - 1.5/16 (ATW1) ALL STEEL ADJUSTABLE TAPWRENCHES
SC /12 1/4, 5/16, 3/8, 7/16, 1/2 1 - 1.5/16 (ATW1) CAPACITY
SC /13 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4 1 - 1.1/2 (ATW3) TAP PIPE TAPS HAND
SC /14 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4 1 - 1.1/2 (ATW3) WRENCH OVERALL SQUARE METRIC BOLT THREAD BSP & BSPT NPT & NPS REAMERS
SC /17 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8, 1 1 - 1.5/16 - 2 (ATW1&4) NO. LENGTH RANGE MM. TAPS MM. TAPS INCHES INCHES INCHES MM. AVAILABILITY
ATW0 4.1/4” 2-5 1.4 - 6 1/16 - 1/4 - - 2.5 - 6 •
ATW1 6.1/4” 2-8 1.4 - 12 1/16 - 1/2 - - 2.5 - 10 •
THREAD: UNF/NF ATW2 9.3/4” 3.55 - 9.5 4.5 - 14 3/16 - 9/16 1/16 - 1/4 1/16 - 1/8 4.5 - 11 •
SET REF THREADING SIZE DIAMETER OF DIES TAPWRENCH ATW3 14” 4.8 - 11.4 6 - 20 1/4 - 3/4 1/8 - 3/8 1/16 - 1/4 7 - 15 •
IN INCHES IN INCHES NO. ATW4 29.1/2” 8.6 - 24.1 14 - 42 9/16 - 1.5/8 3/8 - 1.1/8 1/4 - 1 11 - 30 •
SC /21 5, 10, 1/4, 5/16, 3/8, 7/16, 1/2 13/16 - 1.5/16 (ATW1) ATW5 41” 19.1 - 40.1 36 - 90 1.3/8 - 3.1/2 1-3 1-2 24 - 52 •
SC /22 1/4, 5/16, 3/8, 7/16, 1/2 1 - 1.5/16 (ATW1)
SC /23 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4 1 - 1.1/2 (ATW3)
SC /24 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4 1 - 1.1/2 (ATW3)
SC /27 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8, 1 1 - 1.5/16 - 2 (ATW1&4)

THREAD: BSW
SET REF THREADING SIZE DIAMETER OF DIES TAPWRENCH L1
IN INCHES IN INCHES NO.
SC /30 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 13/16 - 1.5/16 (ATW1) SINGLE ENDED WRENCHES
SC /31 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 13/16 - 1.5/16 (ATW1)
TAP WRENCH NOMINAL SQUARE L1 HANDLE AVAILABILITY
SC /32 1/4, 5/16, 3/8, 7/16, 1/2 1 - 1.5/16 (ATW1) NO. SIZE A/F LENGTH MM.
SC /33 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4 1 - 1.1/2 (ATW3)
SC /34 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4 1 - 1.1/2 (ATW3) SETW 1 .197” 98.5 •
SC /37 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8, 1 1 - 1.5/16 - 2 (ATW1&4) *SETW 2 .242” 98.6 •
SETW 3 .294” 138 •
*SETW 4 .242” 138 •
THREAD: BSF SETW 5 .275” 138 •
SET REF THREADING SIZE DIAMETER OF DIES TAPWRENCH SETW 6 .322” 168.5 •
IN INCHES IN INCHES NO. SETW 7 .360” 168.5 •
SETW 8 .442” 168.5 •
SC /40 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 3/16 - 1.5/16 (ATW1)
SC /42 1/4, 5/16, 3/8, 7/16, 1/2 1 - 1.5/16 (ATW1) * These two wrenches have identical A/F sizes, but different overall dimensions.
SC /43 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4 1 - 1.1/2 (ATW3)
SC /44 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4 1 - 1.1/2 (ATW3)
SC /47 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8, 1 1 - 1.5/16 - 2 (ATW1&4)

THREAD: BA
SET REF RANGE DIAMETER OF DIES TAPWRENCH
IN INCHES NO.
SC /51 0, 1, 2, 3, 4, 5, 6 13/16 (ATW0)
SC /52 0, 1, 2, 3, 4, 5, 6, 7, 8 13/16 (ATW0)
SC /53 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 13/16 (ATW0)

40
 GROUND THREAD TAPS
TAP SPECIFICATIONS - CHOICE OF TAP

Many factors have to be considered when choosing a tap for spiral point tap are: the shearing action of the angular cutting
a particular application. The method of tapping, type of faces produce a fine finish on the threads, shallower flutes permit
a stronger cross section throughout the tap and cutting torque is
material, condition and type of equipment and batch quality
less than that of a hand tap. HALL Spiral Point Taps have a blue
are the main criteria which affect the choice of tap style. steam-tempered finish to reduce surface friction.

STRAIGHT FLUTE TAPS SPIRAL FLUTE TAPS

FOR MACHINE OR HAND USE FOR MACHINE USE ONLY
This type is the basic tap designed as a general purpose tool for These taps, designed primarily for machine tapping of blind
hand and machine operation. holes, are used to the best advantage in materials which produce
As this basic tap will give acceptable performance in most long stringy chips. The shearing action provided by the spiral
materials and for medium sized production runs, it is usually the flutes produces a better finish on difficult to machine metals and
most economical tap to use. However, it performs best in materials causes the chips to be drawn back, eliminating clogging at the
where the cutting action results in chips which break up readily cutting chamfer.
and do not present problems of chip disposal.
The regular hand tap has four flutes in sizes larger than
LONG SHANK
9/32” - 7mm diameter. These taps may not be suitable because of These taps are based on shanks 50% longer than the ISO Short
inadequate chip space when deep or blind holes have to be Machine and Hand Taps and are for deep hole or other ‘long
tapped in soft stringy materials. This applies particularly to the reach’ tapping applications. Available in Taper, Second and
coarse pitch threads such as BSW and UNC. Bottoming Leads.

SPIRAL POINT SERIAL TAPS

FOR MACHINE USE ONLY Serial taps comprise one or more undersized roughing taps which
remove most of the material before final sizing with a finishing tap.
Spiral point taps have straight flutes supplemented by angular
cutting faces at the point. The angular cutting faces cut with a Some reasons for using serial taps are:
shearing action which propels the chips ahead of the tap leaving a] The toughness of the material being tapped
the flutes clear for the free flow of coolant to the point. b] The amount of material to be removed could cause swarf
Spiral point taps are designed for use in through holes, but can be choking with a single tap
used in blind holes providing there is ample clearance beyond the c] A very small tolerance on pitch diameter
threaded section to accommodate the chips. The advantages of a d] An extremely good finish required

The table below indicates taps which after considering the above factors may be suitable for use on a selection of common materials.

CHOICE OF HALL TAP

MATERIAL THROUGH HOLES BLIND HOLES
Low Carbon Steel Straight Flute or Spiral Point Straight Flute or Spiral Flute
High Carbon Steel Straight Flute or Spiral Point Straight Flute or Spiral Flute
Tool Steel Straight Flute or Spiral Point Straight Flute or Spiral Flute
Cast Steel Straight Flute or Spiral Point Straight Flute or Spiral Flute
Cast Iron Straight Flute or Spiral Point Straight Flute
Stainless Steel Straight Flute or Spiral Point Straight Flute or Spiral Flute
Die Cast Aluminium Straight Flute or Spiral Point Straight Flute or Spiral Flute
Silicon Aluminium Straight Flute Straight Flute
Die Cast Zinc Straight Flute or Spiral Point Straight Flute
Brass Straight Flute Straight Flute
Thermo-Setting Plastic (eg: Bakelite) Straight Flute Straight Flute
Thermo-Plastics (eg: Nylon) Straight Flute or Spiral Point Straight Flute or Spiral Flute

41
 GROUND THREAD TAPS
TAP SPECIFICATIONS - DIMENSIONS

PIPE THREAD DIMENSIONS

THREAD SIZES DIMENSIONS IN MM
BSP BSPT OVERALL THREAD SHANK SQUARE
(ISO ‘G’) (ISO ‘R’) LENGTH LENGTH Ø A/F
1/8 1/8 59 15 8.0 6.3
1/4 1/4 67 19 10.0 8.0
ISO (SHORT) DIMENSIONS 3/8 3/8 75 21 12.5 10.0
1/2 1/2 87 26 16.0 12.5
THREAD SIZES DIMENSIONS
5/8 91 26 18.0 14.0
METRIC METRIC OVERALL THREAD SHANK SQUARE 3/4 3/4 96 28 20.0 16.0
COARSE FINE UNC UNF BSW BSF BA LENGTH LENGTH Ø A/F
7/8 102 29 22.4 18.0
1.6 No 0 1/16 41 8 2.5 2.0 1 1 109 33 25.0 20.0
1.7/1.8 No 10 41 8 2.5 2.0 1.1/8 115 34 28.0 22.4
2.0 No 1 No 1 No 9 41 8 2.5 2.0 1.1/4 1.1/4 119 36 31.5 25.0
2.2 No 2 No 2 No 8 44.5 9.5 2.8 2.24 1.1/2 1.1/2 125 37 35.5 28.0
2.5 No 3 No 3 3/32 No 7/6 44.5 9.5 2.8 2.24 1.3/4 132 39 35.5 28.0
3 3 No 4/5 No 4/5 1/8 No 5 48 11 3.15 2.5 2 2 140 41 40.0 31.5
3.5 3.5 No 6 No 6 No 4 50 13 3.55 2.8 2.1/4 142 42 40.0 31.5
4 4 5/32 53 13 4.0 3.15 2.1/2 2.1/2 153 45 45.0 35.5
4.5 4.5 No 8 No 8 No 3 53 13 4.5 3.55 2.3/4 160 46 50.0 40.0
5 5 No 10 No 10 3/16 3/16 No 2 58 16 5.0 4.0 3 3 164 48 50.0 40.0
No 12 No 12 7/32 7/32 No 1 62 17 5.6 4.5
6 6 1/4 1/4 1/4 1/4 No 0 66 19 6.3 5.0
7 7 9/32 9/32 66 19 7.1 5.6 THREAD SIZES DIMENSIONS IN MM
8 8 5/16 5/16 5/16 5/16 72 22 8.0 6.3 NPS NPT NPTF OVERALL THREAD SHANK SQUARE
9 9 72 22 9.0 7.1 (AP1) DRYSEAL LENGTH LENGTH Ø A/F
10 10 3/8 3/8 3/8 3/8 80 24 10.0 8.0 1/16 2.1/8 11/16 0.312 0.234
11 11 7/16 7/16 7/16 7/16 85 25 8.0 6.3 1/8 1/8 1/8 2.1/8 3/4 0.437 0.328
12 12 1/2 1/2 1/2 1/2 89 29 9.0 7.1 1/4 1/4 1/4 2.7/16 1.1/16 0.562 0.421
14 14 9/16 9/16 9/16 9/16 95 30 11.2 9.0 3/8 3/8 3/8 2.9/16 1.1/16 0.700 0.531
16 16 5/8 5/8 5/8 5/8 102 32 12.5 10.0 1/2 1/2 1/2 3.1/8 1.3/8 0.687 0.515
18 18 11/16 11/16 11/16 11/16 112 37 14.0 11.2 3/4 3/4 3/4 3.1/4 1.3/8 0.906 0.679
20 20 3/4 3/4 3/4 3/4 112 37 14.0 11.2 1 1 1 3.3/4 1.3/4 1.125 0.843
22 22 7/8 7/8 7/8 7/8 118 38 16.0 12.5 1.1/4 1.1/4 4 1.3/4 1.312 0.984
24 24/25 1 1 1 1 130 45 18.0 14.0 1.1/2 4.1/4 1.3/4 1.500 1.125
27/30 1.1/8 127 37 20.0 16.0 2 4.1/2 1.3/4 1.875 1.406
27 135 45 20.0 16.0 2.1/2 5.1/2 2.9/16 2.250 1.687
30 1.1/8 1.1/8 1.1/8 138 48 20.0 16.0 3 6 2.5/8 2.625 1.968
32/33 1.1/4 137 37 22.4 18.0
33 1.1/4 1.1/4 1.1/4 151 51 22.4 18.0
36 1.3/8 144 39 25.0 20.0
36 1.3/8 1.3/8 162 57 25.0 20.0
39/40 1.1/2 149 39 28.0 22.4
39 1.1/2 1.1/2 1.1/2 170 60 28.0 22.4
42 1.5/8 1.5/8 170 60 28.0 22.4
45 1.3/4 1.3/4 1.3/4 187 67 31.5 25.0
48 1.7/8 187 67 31.5 25.0
52/56 2 2 2 200 70 35.5 28.0
60 2.1/4 2.1/4 2.1/4 221 76 40.0 31.5
64 2.1/2 2.1/2 2.1/2 224 79 40.0 31.5
68/72 2.3/4 2.3/4 2.3/4 234 79 45.0 35.5
3 3 3 258 83 50.0 40.0

ISO (LONG SHANK) DIMENSIONS

No OF OVERALL THREAD SHANK SQUARE
METRIC UNC UNF FLUTES LENGTH LENGTH Ø A/F
MM MM MM MM
M3 x 0.50 3 66 11 2.24 1.80
M3.5 x 0.60 3 68 13 2.50 2.00
M4 x 0.70 3 73 13 3.15 2.50
M4.5 x 0.75 3 73 13 3.55 2.80
M5 x 0.80 3 79 16 4.0 3.15
M6 x 1.00 1/4 1/4 3 89 19 4.5 3.55
M7 x 1.00 3 89 19 5.6 4.5
M8 x 1.25 5/16 5/16 4 97 22 6.3 5.0
M9 x 1.25 4 97 22 7.1 5.6
M10 x 1.50 4 108 24 8.0 6.3
3/8 3/8 4 108 24 7.1 5.6
M11 x 1.50 7/16 7/16 4 115 25 8.0 6.3
M12 x 1.75 1/2 1/2 4 119 29 9.0 7.1
M14 x 2.0 9/16 9/16 4 127 30 11.2 9.0
M16 x 2.0 5/8 5/8 4 137 32 12.5 10.0
M18 x 2.5 3/4 3/4 4 149 37 14.0 11.2
M20 x 2.5 4 149 37 14.0 11.2
M22 x 2.5 7/8 7/8 4 158 38 16.0 12.5
M24 x 3.0 1 1 4 172 45 18.0 14.0

42
 SPLIT CIRCULAR DIES & HEXAGON DIENUTS
HIGH SPEED STEEL

Manufactured from quality High Speed Steel to BSW

BS 1127:1950. Used for cutting external threads
NOM. DIA. DIES - OUTSIDE DIAMETER HEX
- either by machine, or by hand when used in a die stock. AND PITCH 13/16” 1” 1.5/16” 1.1/2” 2” 3” 4” DIENUT
AVAILABILITY
Manufactured from quality High Speed Steel to 1/8 • •
5/32 •
BS 1127:1950. Used for correcting bruised and 3/16 • •
damaged external threads by hand. 7/32 • •
1/4 • • • •
5/16 • • •
STANDARD METRIC COARSE ISO 3/8 • • • •
7/16 • • •
NOM. DIA. DIES - OUTSIDE DIAMETER HEX 1/2 • • • •
AND PITCH 13/16” 1” 1.5/16” 1.1/2” 2” 3” 4” DIENUT 9/16 • • • •
AVAILABILITY
5/8 • • •
M2 x 0.4 •*
11/16 • •
M2.2 x 0.45 •
3/4 • • •
M2.5 x 0.45 •*
7/8 • •
M3 x 0.5 •* •
1 • •
M3.5 x 0.6 • •
1.1/8 • •
M4 x 0.7 •* •
1.1/4 • •
M4.5 x 0.75 • •
1.3/8 • •
M5 x 0.8 •* •
1.1/2 • •
M6 x 1 •* • • •
1.3/4 • •
M7 x 1 •* • • •
2 • •
M8 x 1.25 •* • •
M9 x 1.25 •* • •
M10 x 1.5 •* • • • BSF
M11 x 1.5 • • •
M12 x 1.75 •* • • NOM. DIA. DIES - OUTSIDE DIAMETER HEX
M14 x 2 • • • •
AND PITCH 13/16” 1” 1.5/16” 1.1/2” 2” 3” 4” DIENUT
AVAILABILITY
M16 x 2 • • •
3/16 • •
M18 x 2.5 • • •
7/32 •
M20 x 2.5 • • •
1/4 • • • •
M22 x 2.5 • •
5/16 • • •
M24 x 3 • •
3/8 • • • •
M27 x 3 • •
7/16 • • •
M30 x 3.5 • •
1/2 • • • •
M33 x 3.5 • •
9/16 • • • •
M36 x 4 • •
5/8 • • •
M39 x 4 • •
11/16 • •
M42 x 4.5 • •
3/4 • • •
* Left Hand available. 7/8 • •
1 • •
1.1/8 • •
METRIC FINE AND OTHER THREADS 1.1/4 • •
1.3/8 • •
NOM. DIA. DIES - OUTSIDE DIAMETER HEX
1.1/2 • •
AND PITCH 13/16” 1” 1.5/16” 1.1/2” 2” 3” 4” DIENUT
AVAILABILITY
1.3/4 • •
M3 x 0.35 • • 2 • •
M3 x 0.6 •
M3.5 x 0.35
M4 x 0.5
•
• •
BSP
M4.5 x 0.5 • NOM. DIA. DIES - OUTSIDE DIAMETER HEX
M5 x 0.5 • • AND PITCH 1” 1.5/16” 1.1/2” 2” 2.1/4” 3” 4” DIENUT
M5.5 x 0.9 • AVAILABILITY
M6 x 0.75 • • 1/8 • • • •
M7 x 0.75 • • 1/4 • • • •
M8 x 1 • • 3/8 • • • •
M10 x 0.75 • 1/2 • • •
*M10 x 1 • • 5/8 • • •
M10 x 1.25 • • 3/4 • • • •
M12 x 1 • • 7/8 • • •
*M12 x 1.25 • • 1 • • •
M12 x 1.5 • • 1.1/4 • • •
*M14 x 1.25 • • 1.1/2 • •
M14 x 1.5 • • • 1.3/4 • •
M16 x 1 • 2 • •
**M16 x 1.5 • •
*M18 x 1.5 • •
M20 x 1 •
BSPT AND NPT (Dies supplied as solid non-adjustable)
**M20 x 1.5 • • NOM. DIA. DIES - OUTSIDE DIAMETER HEX
M20 x 2 • AND PITCH 1” 1.1/2” 2” 2.1/4” 4” DIENUT
M22 x 1.5 • • AVAILABILITY
M24 x 1.5 • • 1/8 • •
Sizes:
M24 x 2 • • 1/4 • 1.1/4 - •
**M25 x 1.5 • • 3/8 • 1.1/2 - 2 •
M27 x 2 • 1/2 • available. •
Please
M30 x 2 • • 3/4 • inquire. •
**M32 x 1.5 • • 1 • •
* Spark Plug.
** Metric Conduit.

43
 SPLIT CIRCULAR DIES & HEXAGON DIENUTS
HIGH SPEED STEEL

Manufactured from quality High Speed Steel to SETS OF HSS HEXAGON DIENUTS
BS 1127:1950. Used for cutting external threads IN POLISHED WOOD CASES
- either by machine, or by hand when used in a die stock.
Manufactured from quality High Speed Steel to
BS 1127:1950. Used for correcting bruised and
damaged external threads by hand.

UNC / NC
NOM. DIA. DIES - OUTSIDE DIAMETER HEX
AND PITCH 13/16” 1” 1.5/16” 1.1/2” 2” 3” 4” DIENUT
AVAILABILITY
No.2 •
No.3 •
No.4 •
No.5 •
No.6 •
No.8 •
No.10 • • THREAD: METRIC ISO COARSE
No.12 • • SET REF THREADING SIZES IN MILLIMETRES
1/4 • • • •
5/16 • • • DN/1 6, 8, 10, 12
3/8 • • • • DN/2 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
7/16 • • •
1/2 • • • •
9/16 • • • • THREAD: METRIC ISO COARSE, FINE,
5/8 • • •
3/4 • • • COMBINATION
7/8 • • SET REF THREADING SIZES IN MILLIMETRES
1 • •
DN/1C 6x1, 7x1, 8x1.25, 10x1.5, 12x1.75 coarse combination
1.1/8 • •
1.1/4 • •
6x0.75, 7x0.75, 8x1, 10x1, 12x1.25 fine
1.3/8 • •
1.1/2 • •
1.3/4 • • THREAD: UNC / NC, UNF / NF
2 • •
SET REF THREADING SIZES IN INCHES
UNC/NC UNF/NF
UNF / NF DN/11 DN/21 1/4, 5/16, 3/8, 7/16, 1/2
NOM. DIA. DIES - OUTSIDE DIAMETER HEX DN/12 DN/22 1/4, 5/16, 3/8, 7/16, 1/2*, 5/8, 3/4, 7/8, 1
AND PITCH 13/16” 1” 1.5/16” 1.1/2” 2” 3” 4” DIENUT DN/13 DN/23 10, 1/4, 5/16, 3/8, 7/16, 1/2*, 5/8, 3/4, 7/8, 1
AVAILABILITY DN/2C 1/4, 5/16, 3/8, 7/16, 1/2 Combination
No.2 • * 9/16 size can be included if required.
No.3 •
No.4 •
No.5 • THREAD: BSW, BSF
No.6 •
No.8 • SET REF THREADING SIZES IN INCHES
UNC/NC UNF/NF
No.10 • •
No.12 • • DN/31 DN/41 1/4, 5/16, 3/8, 7/16, 1/2
1/4 • • • • DN/32 DN/42 1/4, 5/16, 3/8, 7/16, 1/2*, 5/8, 3/4, 7/8, 1
5/16 • • • DN/33 DN/43 3/16, 1/4, 5/16, 3/8, 7/16, 1/2*, 5/8, 3/4, 7/8, 1
3/8 • • • • DN/34 - 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2*, 5/8, 3/4, 7/8, 1
7/16 • • • DN/3C 1/4, 5/16, 3/8, 7/16, 1/2 Combination
1/2 • • • • * 9/16 size can be included if required.
9/16 • • • •
5/8 • • •
3/4 • • •
7/8 • •
1 • •
1.1/8 • •
1.1/4 • •
1.3/8 • • DIESTOCKS FOR SPLIT CIRCULAR DIES
1.1/2 • • O/D INCHES AVAILABILITY
13/16 •
BS | BRASS BA | BRITISH ASSOCIATION 1 •
1.5/16 •
NOM. DIA. DIES - OUTSIDE DIAMETER NOM. DIA. DIES - OUTSIDE DIAMETER HEX 1.1/2 •
AND PITCH 1” 1.5/16” 1.1/2” 2” AND PITCH 13/16” 1” DIENUT 2 •
AVAILABILITY AVAILABILITY 2.1/4 •
*1/4 0 • • • 3 •
5/16 • • 1 • • • 4 •
3/8 • • 2 • • •
7/16 • 3 • •
1/2 • 4 • •
5/8 • 5 •
3/4 • 6 • •
7/8 • 7 •
1 • 8 •
* BSF also. 9 •
10 •

44