Scribd
Upload
243 views1 page

Tool Box Talk Manual Handling

Manual handling causes almost a quarter of all workplace injuries, most commonly to hands, feet, legs, and back, with some back injuries resulting in permanent disability. While regulations do not specify a maximum weight limit, it is recommended that no individual lift more than 20kg alone. Proper lifting technique and use of mechanical equipment can help prevent injury, and team lifting requires clear communication to share the load safely.

Uploaded by

rockape
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
243 views1 page

Tool Box Talk Manual Handling

Manual handling causes almost a quarter of all workplace injuries, most commonly to hands, feet, legs, and back, with some back injuries resulting in permanent disability. While regulations do not specify a maximum weight limit, it is recommended that no individual lift more than 20kg alone. Proper lifting technique and use of mechanical equipment can help prevent injury, and team lifting requires clear communication to share the load safely.

Uploaded by

rockape
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

HANDLING MATERIALS

MANUAL HANDLING

Almost a quarter of all injuries at work are caused by accidents during manual handling. Most of the
injuries are to hands, feet, legs and back. Some of the back injuries result in permanent disability.

Although the Manual Handling Operations Regulations do not specify what weight a person can lift,
it is now recognised that one person should not lift any load exceeding 20kg (44 lb).

Take care of yourself by following the guidance notes given below:-

• If mechanical handling equipment is available and you are authorised and trained to use it, do
so.
• Wear the right protective equipment for the job.
• Know your physical capabilities and only tackle jobs you can reasonably handle.
• Think the job through:-
1.Can you handle the load by yourself?
2.Is there a clear, properly lit, walkway to the work or stacking area?
3.Is there a safe stacking area?
4.Will timber packing be required between the articles when stacked?
5.Seek advice on height restrictions for stacks. Remember, it is often more dangerous de-
stacking than stacking.
• Always check that the weight of the load is known before lifting.
• Know the correct way of lifting before attempting a lift:-
1.Stand reasonably close to the load, be sure footing is firm and feet are about 300 mm
apart.
2.Squat down by bending the knees, keeping the back as straight as you can.
3.Place hands where they will not slip, and grip firmly.
4.Breathe in before lifting - inflating the lungs helps support the spine.
5.Straighten up with the legs, keeping the back as straight as you can
6.Hold the load firmly and close to the body.
7.Ensure your view is not impeded by the load whilst working with it.
8.Lift slowly and smoothly. Avoid jerking motions.

When two or more persons lift a load, one of the team must be nominated to give instruction to
ensure that each person lifts an equal share and the team work together.

You might also like