CED-2 CEMENT AND CONCRETE Number of Standards -- 140

Standard Description
SP 16 : 1980 Design Aids for Reinforced Concrete to IS 456 : 1978
SP 23 : 1982 Handbook on Concrete Mixes
SP 24 (S and T) : 1983 Explanatory Handbook on Indian Standard Code of Practice for Plain and Reinforced
Concrete
SP 34 : 1987 Handbook on Concrete Reinforcement and Detailing
IS 269 : 1989 Specification for 33 grade ordinary portland cement
IS 383 : 1970 Specification for coarse and fine aggregates from natural sources for concrete
IS 455 : 1989 Specification for Portland slag cement
IS 456 : 2000 Plain and Reinforced Concrete - Code of Practice
IS 457 : 1957 Code of practice for general construction of plain and reinforced concrete for dams and other
massive structures
IS 516 : 1959 Method of test for`strength of concrete
IS 650 : 1991 Specification for standard sand for testing of cement
IS 1199 : 1959 Methods of sampling and analysis of concrete
IS 1343 : 1980 Code of Practice for Prestressed Concrete
IS 1344 : 1981 Specification for calcined clay pozzolana
IS 1489 : Part 1 : 1991 Specification for Portland pozzolana cement Part 1 Flyash based
IS 1489 : Part 2 : 1991 Specification for Portland-pozzolana cement Part 2 calcined clay based
IS 1727 : 1967 Methods of test for pozzolanic materials
IS 2386 : Part I : 1963 Methods of Test for Aggregates for Concrete - Part I : Particle Size and Shape
IS 2386 : Part 2 : 1963 Methods of test for aggreegates for concrete Part 2 Estimation of deleterious materials
and organic impurities
IS 2386 : Part 3 : 1963 Methods of test for aggregates for concrete Part 3 Specific gravity, density, voids,
absorption and bulking
IS 2386 : Part 4 : 1963 Methods of test for aggregates for concrete Part 4 Mechanical properties
IS 2386 : Part V : 1963 Methods of Test for Aggregates for Concrete - Part V : Soundness
IS 2386 : Part 6 : 1963 Methods of test for aggregates for concrete : Part 6 Measuring mortar making properties
of fine aggregates
IS 2386 : Part VII : 1963 Methods of Test for Aggregates for Concrete - Part VII : Alkali Aggregate Reactivity
IS 2386 : Part VIII : 1963 Methods of Test for Aggregates for Concrete - Part VIII : Petrographic Examination
IS 2430 : 1986 Methods for Sampling of Aggregates for Concrete
IS 2502 : 1963 Code of Practice for Bending and Fixing of Bars for Concrete Reinforcement
IS 2505 : 1992 Concrete vibrators - Immersion type - General requirements
IS 2506 : 1985 General Requirements for Concrete Vibrators, Screed Board Type
IS 2645 : 2003 Integral Waterproofing Compounds for Cement Mortar and Concrete - Specification
IS 2770 : Part 1 : 1967 Methods of testing bond in reinforced concrete Part 1 Pull-out test
IS 3085 : 1965 Method of Test for Permeability of Cement Mortar and Concrete
IS 3370 : Part 1 : 1965 Code of practice for concrete structures for the storage of liquids: Part 1 General
requirements
IS 3370 : Part 2 : 1965 Code of practice for concrete structures for the storage of liquids: Part 2 Reinforced
concrete structures
IS 3370 : Part 3 : 1967 Code of practice for concrete structures for the storage of liquids: Part 3 Prestressed
concrete structures
IS 3370 : Part 4 : 1967 Code of practice for concrete structures for the storage of liquids: Part 4 Design tables

1
IS 3466 : 1988 Specification for masonry cement
IS 3535 : 1986 Methods of sampling hydraulic cement
IS 3558 : 1983 Code of practice for use of immersion vibrators for consolidating concrete
IS 3812 : 1981 Specification for fly ash for use as pozzolana and admixture
IS 3812 : Part 1 : 2003 Pulverized Fuel Ash - Specification - Part 1 : For Use as Pozzolana in Cement, Cement
Mortar and Concrete
IS 3812 : Part 2 : 2003 Pulverized Fuel Ash - Specification - Part 2 : For Use as Admixture in Cement Mortar
and Concrete
IS 4031 : Part 1 : 1996 Methods of physical tests for hydraulic cement: Part 1 Determination of fineness by dry
sieving
IS 4031 : Part 2 : 1999 Methods of physical tests for hydraulic cement: Part 2 Determination of fineness by
specific surface by Blaine air permeability method
IS 4031 : Part 3 : 1988 Methods of physical tests for hydraulic cement: Part 3 Determination of soundness
IS 4031 : Part 4 : 1988 Methods of physical tests for hydraulic cement: Part 4 Determination of consistency of
standard cement paste
IS 4031 : Part 5 : 1988 Methods of physical tests for hydraulic cement: Part 5 Determination of initial and final
setting times
IS 4031 : Part 6 : 1988 Methods of physical tests for hydraulic cement: Part 6 Determination of compressive
strength of hydraulic cement (other than masonry cement)
IS 4031 : Part 7 : 1988 Methods of physical tests for hydraulic cement: Part 7 Determination of compressive
strength of masonry cement
IS 4031 : Part 8 : 1988 Methods of physical tests for hydraulic cement: Part 8 Determination of transverse and
compressive strength of plastic mortar using prism
IS 4031 : Part 9 : 1988 Methods of physical tests for hydraulic cement: Part 9 Determination of heat of hydration
IS 4031 : Part 10 : 1988 Methods of physical tests for hydraulic cement: Part 10 Determination of drying
shrinkage
IS 4031 : Part 11 : 1988 Methods of physical tests for hydraulic cement: Part 11 Determination of density
IS 4031 : Part 12 : 1988 Methods of physical tests for hydraulic cement: Part 12 Determination of air content of
hydraulic cement mortar
IS 4031 : Part 13 : 1988 Methods of Physical Tests for Hydraulic Cement - Part 13 : Measurement of Water
Retentivity of Masonry Cement
IS 4031 : Part 14 : 1989 Methods of physical test for hydraulic cement Part 14 Determination of false set
IS 4031 : Part 15 : 1991 Methods of physical test for hydraulic cement Part 15 Determination of fineness by wet
sieving
IS 4032 : 1985 Method of chemical analysis of hydraulic cement
IS 4305 : 1967 Glossary of Terms Relating to Pozzolana
IS 4634 : 1991 Methods for testing performance of batch-type concrete mixers
IS 4845 : 1968 Definitions and terminology relating to hydraulic cement
IS 4926 : 2003 Ready-Mixed Concrete - Code of Practice
IS 5512 : 1983 Specification for flow table for use in tests of hydraulic cements and pozzolanic materials
IS 5513 : 1996 Specification for vicat apparatus
IS 5514 : 1996 Apparatus Used in `Le-chatelier' Test - Specification
IS 5515 : 1983 Specification for compaction factor apparatus
IS 5516 : 1996 Specification for variable flow type air-permeability apparatus (Blaine type)
IS 5525 : 1969 Recommendations for Detailing of Reinforcement in Reinforced Concrete Works
IS 5536 : 1969 Specification for constant flow type air-permeability apparatus (Lea and Nurse type)
IS 5816 : 1999 Splitting Tensile Strength of Concrete Method of Test

2
IS 6452 : 1989 Specification for high alumina cement for structural use
IS 6461 : Part 1 : 1972 Glossary of terms relating to cement concrete: Part I Concrete aggregates
IS 6461 : Part II : 1972 Glossary of Terms Relating to Cement Concrete - Part II : Materials (Other than Cement
and Aggregate)
IS 6461 : Part III : 1972 Glossary of Terms Relating to Cement Concrete - Part III : Concrete Reinforcement
IS 6461 : Part 4 : 1972 Glossary of terms relating to cement concrete: Part IV Types of concrete
IS 6461 : Part 5 : 1972 Glossary of terms relating to cement concrete: Part V Formwork for concrete
IS 6461 : Part 6 : 1972 Glossary of terms relating to cement concrete: Part VI Equipment, tools and plant
IS 6461 : Part VII : 1973 Glossary of Terms Relating to Cement Concrete - Part VII : Mixing, Laying,
Compaction, Curing and Other Construction Aspects
IS 6461 : Part 8 : 1973 Glossary of terms relating to cement concrete: Part VIII Properties of concrete
IS 6461 : Part 9 : 1973 Glossary of terms relating of cement concrete: Part 9 Structural aspects
IS 6461 : Part X : 1973 Glossary of Terms Relating to Cement Concrete - Part X : Tests and Testing Apparatus
IS 6461 : Part 11 : 1973 Glossary of terms relating to cement concrete: Part 11 Prestressed concrete
IS 6461 : Part 12 : 1973 Glossary of terms relating to cement concrete: Part 12 Miscellaneous
IS 6491 : 1972 Methods of Sampling Fly Ash
IS 6909 : 1990 Specification for supersulphated cement
IS 6923 : 1973 Methods of test for performance of screed board concrete vibrators
IS 6925 : 1973 Methods of Test for Determination of Water Soluble Chlorides in Concrete Admixtures
IS 7246 : 1974 Recommendations for use of table vibrators for consolidating concrete
IS 7320 : 1974 Specification for concrete slump test apparatus
IS 7325 : 1974 Specification for apparatus for determining constituents of fresh concrete
IS 7861 : Part 1 : 1975 Code of practice for extreme weather concreting Part 1 Recommended practice for hot
weather concreting
IS 7861 : Part 2 : 1981 Code of pracdtice for extreme weather concreting: Part II Recommended practice for
cold weather concreting
IS 8041 : 1990 Specification for rapid hardening Portland cement
IS 8042 : 1989 Specification for white Portland cement
IS 8043 : 1991 Specification for hydrophobic Portland cement
IS 8112 : 1989 Specification for 43 grade ordinary Portland cement
IS 8125 : 1976 Dimensions and Materials of Cement Rotary Kilns, Components and Auxiliaries (Dry Process
With Suspension Preheater)
IS 8142 : 1976 Method of test for determining setting time of concrete by penetration resistance
IS 8229 : 1986 Specification for Oil-well Cement
IS 9012 : 1978 Recommended practice for shotcreting
IS 9013 : 1978 Method of making, curing and determining compressive strength of accelerated cured concrete
test specimens
IS 9103 : 1999 Concrete Admixtures - Specification
IS 9142 : 1979 Specification for Artificial Lightweight Aggregates for Concrete Masonry Units
IS 9284 : 1979 Method of test for abrasion resistance of concrete
IS 9376 : 1979 Specification for apparatus for measuring aggregate crushing value and ten percent fines value
IS 9377 : 1979 Specification for apparatus for aggregate impact value
IS 9399 : 1979 Specification for apparatus for flexural testing of concrete
IS 9459 : 1980 Specification for apparatus for use in measurement of length change of hardened cement paste,
mortar and concrete
IS 9799 : 1981 Specification for pressure meter for determination of air content of mixed concrete

3
IS 10070 : 1982 Specification for machine for abrasion testing of coarse aggregates
IS 10078 : 1982 Specification for jolting apparatus for testing cement
IS 10079 : 1982 Specification for cylindrical metal measures for use in tests of aggregates and concrete
IS 10080 : 1982 Specification for vibration machine
IS 10086 : 1982 Specification for moulds for use in tests of cement and concrete
IS 10262 : 1982 Recommended guidelines for concrete mix design
IS 10510 : 1983 Specification for vee-bee consistometer
IS 10850 : 1984 Specification for apparatus for measurement of water retentivity of masonry cement
IS 10890 : 1984 Specification for planetary mixer used in tests of cement and pozzolana
IS 11262 : 1985 Specification for calorimeter for determination of heat of hydration of hydraulic cement
IS 11263 : 1985 Specification for cylinder measures for determination of air content of hydraulic cement mortar
IS 11389 : 1986 Methods of test for performance of concrete vibrators; Immersion type
IS 11993 : 1987 Code of practice for use of screed board concrete vibrators
IS 12089 : 1987 Specification for granulated slag for manufacture of Portland slag cement
IS 12119 : 1987 General requirements for pan mixers for concrete
IS 12269 : 1987 Specification for 53 grade ordinary Portland cement
IS 12330 : 1988 Specificatioon for sulphate resisting Portland cement
IS 12423 : 1988 Method for colorimetric analysis of hydraulic cement
IS 12468 : 1988 General requirements for vibrators for mass concreting; Immersion type
IS 12600 : 1989 Specification for low heat Portland cement
IS 12803 : 1989 Methods of analysis of hydraulic cement by X-ray fluorescence spectrometer
IS 12813 : 1989 Method of analysis of hydraulic cement by atomic spectrophotometer
IS 12870 : 1989 Calcined Clay Pozzolana - Method of Sampling
IS 13311 : Part 1 : 1992 Non-destructive testing of concret: Part 1 Ultrasonic pluse velocity
IS 13311 : Part 2 : 1992 Methods of non-destructive testing of concrete: Part 2 Rebound hammer
IS 14345 : 1996 Specification for autoclave apparatus
IS 14687 : 1999 Falsework for Concrete Structures - Guidelines
IS 14858 : 2000 Compression Testing Machine Used for Testing of Concrete and Mortar - Requirements
IS 14959 : Part 1 : 2001 Determination of Water Soluble and Acid Soluble Chlorides in Mortar and Concrete -
Method of Test - Part 1 : Fresh Mortar and Concrete
IS 14959 : Part 2 : 2001 Determination of Water Soluble and Acid Soluble Chlorides in Mortar and Concrete -
Method of Test - Part 2 : Hardened Mortar and Concrete
IS 15388 : 2003 Silica Fume - Specification

CED-3 SANITARY APPLIANCES AND WATER FITTINGS Number of Standards -- 86

IS 651 : 1992 Specification for salt glazed stoneware pipe and fittings
IS 771 : Part 1 : 1979 Specification for glazed fire-clay sanitary appliances: Part 1 General requirements
IS 771 : Part 2 : 1985 Specification for glazed fire-clay sanitary appliances: Part 2 Specific require ments of
kitchen and laboratory sinks
IS 771 : Part 3 : Sec 1 : 1979 Specification for glazed fire clay sanitary appliances : Part 3 Specific requirements
of urinals, Section 1 Slab urinals
IS 771 : Part 3 : Sec 2 : 1985 Specification for glazed fire-clay sanitary appliances: Part 3 Specific requirements

4
of urinals: Section 2 Stall urinals
IS 771 : Part 4 : 1979 Specification for glazed fire-clay sanitary appliances: Part 4 Specific requirements of
postmortom slabs
IS 771 : Part V : 1979 Specification for Glazed Fire-clay Sanitary Appliances - Part V : Specific Requirements of
Shower Trays
IS 771 : Part VI : 1979 Specification for Glazed Fire-clay Sanitary Appliances - Part VI : Specific Requirements
of Bed Pan Sinks
IS 771 : Part 7 : 1981 Specification for glazed fire-clay sanitary appliances: Part 7 Specific requirements of slop
sinks
IS 772 : 1973 Specification for general requirements for enamelled cast iron sanitary appliances
IS 773 : 1988 Specification for enamelled cast iron water-closets railway coaching stock type
IS 774 : 1984 Specification for flushing cistern for water closets and urinals (other than plastic cistern)
IS 775 : 1970 Specification for cast iron brackets and supports for wash basins and sinks
IS 778 : 1984 Specification for Copper Alloy Gate, Globe and Check Valves for Waterworks Purposes
IS 779 : 1994 Specification for water meters (domestic type)
IS 781 : 1984 Specification for cast copper alloy screw down bib taps and stop valves for water services
IS 782 : 1978 Specification for caulking lead
IS 1700 : 1973 Specification for drinking fountains
IS 1701 : 1960 Specification for mixing valves for ablutionary and domestic purposes
IS 1703 : 2000 Water Fittings - Copper Alloy Float Valves (Horizontal Plunger Type) - Specification
IS 1711 : 1984 Specification for self-closing taps for water supply purposes
IS 1726 : 1991 Specification for cast iron manhole covers and frames
IS 1795 : 1982 Specification for Pillar Taps for Water Supply Purposes
IS 2104 : 1981 Specification for water meter boxes (domestic type)
IS 2326 : 1987 Specification for Automatic Flushing Cisterns for Urinals (Other than Plastic Cisterns)
IS 2373 : 1981 Specification for Water Meters (Bulk Type)
IS 2401 : 1973 Code of practice for selection, installation and maintenance of domestic water meters
IS 2548 : Part 1 : 1996 Specification for plastic seats and covers for water-closets: Part 1 Thermoset seats and
covers
IS 2548 : Part 2 : 1996 Specification for plastic seats and covers for water-closets: Part 2 Thermo plastic seats
and covers
IS 2556 : Part 1 : 1994 Specification for vitreous sanitary appliances (vitreous china): Part 1 General
requirements
IS 2556 : Part 2 : 1994 Specification for vitreous sanitary appliances (vitreous china): Part 2 Specific
requirements of wash-down water-closets
IS 2556 : Part 3 : 1994 Vitreous Sanitary Appliances (Vitreous China) - Specification - Part 3 : Specific
Requirements of Squatting Pans
IS 2556 : Part 4 : 1994 Specification for vitreous sanitary appliances (vitreous china): Part 4 Specific
requirements of wash basins
IS 2556 : Part 5 : 1994 Specification for vitreous sanitary appliances (vitreous china): Part 5 Specific
requirements of laboratory sinks
IS 2556 : Part 6 : 1995 Vitreous Sanitary Appliances (Vitreous China) - Part 6 : Specific Requirements of Urinals
and Partition Plates
IS 2556 : Part 7 : 1995 Vitreous Sanitary Appliances (vitreous china) - Specification - Part 7 : Specific
Requirements of Accessories for Sanitary Appliances
IS 2556 : Part 8 : 1995 Vitreous Sanitary Appliances (vitreous china) - Specification - Part 8 : Specific
Requirements of Pedestal Close Coupled Washdown and Syphonic Water Closets
IS 2556 : Part 9 : 1995 Specification for vitreous sanitary appliances (vitreous china): Part 9 Specific

5
requirements of bidets
IS 2556 : Part 14 : 1995 Specification for vitreous sanitary appliances (vitreous china): Part 14 Specific
requirements of integrated squatting pans
IS 2556 : Part 15 : 1995 Vitreous Sanitary Appliances (vitreous china) - Specification - Part 15 : Specific
Requirements of Universal Water Closets
IS 2556 : Part 16 : 2002 Vitreous Sanitary Appliances (Vitreous China) - Specification - Part 16 : Specific
Requirements of Wash Down Wall Mounted Water Closets
IS 2556 : Part 17 : 2001 Vitreous Sanitary Appliances (Vitreous China) - Specification - Part 17 : Specific
Requirements of Wall Mounted Bidets
IS 2685 : 1971 Code of pracstice for selection, installation and maintenance of sluice valves
IS 2692 : 1989 Specification for ferrules for water services
IS 2963 : 1979 Specification for copper alloy waste-fittings for wash basins and sinks
IS 3004 : 1979 Specification for plug cocks for water supply purposes
IS 3006 : 1979 Specification for chemically resistant glazed stoneware pipes and fittings
IS 3042 : 1965 Specification for single faced sluice gates (200 to 1200 mm size)
IS 3311 : 1979 Specification for waste plug and its accessories for sinks and wash-basins
IS 3489 : 1985 Specification for enamelled steel bath tubs
IS 3950 : 1979 Specification for surface boxes for sluice valves
IS 4038 : 1986 Specification for foot valves for water works purposes
IS 4346 : 1982 Specification for washers for use with fittings for water services
IS 5219 : Part 1 : 1969 Specification for cast copper alloys traps: Part 1 'P' and 'S' traps
IS 5312 : Part 1 : 1984 Specification for Swing Check Type Reflux (Non-Return] Valves for Water Works
Purposes - Part 1 : Single-Door Pattern
IS 5312 : Part 2 : 1986 Specification for Swing Check Type Reflux (non-return) Valves for Water Works Purpose
- Part 2 : Multi-Door Pattern
IS 5434 : 1969 Specification for non-ferrous alloy bottle traps for marine use
IS 5455 : 1969 Specification for cast-iron steps for manholes
IS 5869 : 1970 Specification for Pillar Taps for Marine Use
IS 5917 : 1970 Specification for vitreous (vitreous china) wash basins for marine use
IS 5961 : 1970 Specification for cast iron gratings for drainage purposes
IS 6249 : 1971 Specification for flush valves and fittings for marine use
IS 6251 : 1971 Specification for Shower and Shower Fittings for Marine Use
IS 6411 : 1985 Specification for gel-coated glass fibre reinforced polyester resin bath tubs
IS 6784 : 1996 Method for performance testing of water meters (domestic type)
IS 7231 : 1994 Specification for plastic flushing cisterns for waterclosets and urinals
IS 8718 : 1978 Specification for vitreous enamelled steel kitchen sinks
IS 8719 : 1978 Specification for vitreous siphonic wash-down water closets for marine use
IS 8727 : 1978 Specification for vitreous enamelled steel wash bsins
IS 8931 : 1993 Specification for copper alloy fancy single taps, combination tap assembly and stop valves for
water services
IS 9076 : 1979 Specification for vitreous integrated squatting pans for marine use
IS 9338 : 1984 Specification for cast iron screw-down stop valves and stop and check valves for water works
purposes
IS 9739 : 1981 Specification for pressure reducing valves for domestic water supply systems
IS 9758 : 1981 Specification for flush valves and fittings for water closets and urinals
IS 9762 : 1994 Specification for polyethylene floats (spherical) for float valves

6
IS 9763 : 2000 Plastics Bib Taps, Pillar Taps, Angle Valves and Stop Valves for Hot and Cold Water Services -
Specification
IS 11246 : 1992 Specification for glass fibre reinforced polyester resins (GRP) squatting pans
IS 12234 : 1988 Specification for plastic equilibrium floatvalve for cold water services
IS 12701 : 1996 Specification for rotational moulded polyethylene water storage tanks
IS 13049 : 1991 Specification for diaphragm type (plastic body) float operated valves for cold water services
IS 13114 : 1991 Specification for forged brass gate, globe and check valves for water works purposes
IS 13349 : 1992 Specification for single faced cast iron thimble mounted sluice gates
IS 13983 : 1994 Specification for stainless steel sinks for domestic purposes
IS 14399 : Parts 1 and 2 : 1996 Hot Press Moulded Thermosetting Glass Fibre Reinforced Polyester Resin
(GRP) Sectional Water Storage Tanks
IS 14845 : 2000 Resilient Seated Cast Iron Air Relief Valves for Water Works Purposes - Specification
IS 14846 : 2000 Sluice Valve for Water Works Purposes (50 to 1200 mm Size) - Specification

CED-4 BUILDING LIMES AND LIME PRODUCTS Number of Standards -- 49

Standard Description
IS 712 : 1984 Specification for building limes
IS 1624 : 1986 Method of field testing of building lime
IS 1635 : 1992 Code of practice for field slaking of building lime and preparation of putty
IS 1849 : Part 1 : Sec 1 : 1990 Design and installation of vertical mixed-feed lime kiln guide : Part 1 Lime stone
Section 1 Masonry type shaft
IS 1849 : Part 1 : Sec 2 : 1991 Design and installation of vertical mixed feed type lime kiln guide: Part 1 For
limestone Section 2 RCC type shaft
IS 1849 : Part 2 : 1977 Guide for design and installation of vertical mixed-feed type lime kiln: Part 2 For
limeshell
IS 1861 : Part 1 : 1990 Guide for manufacture of lime in vertical mixed-feed type kiln: Part 1 From lime-stone
IS 1861 : Part 2 : 1977 Guide for manufacture of lime in vertical mixed-feed type kiln: Part 2 From limeshell
IS 2095 : Part 1 : 1996 Specification for gypsum plaster boards Part 1 Plain gypsum plaster boards
IS 2095 : Part 2 : 2001 Gypsum Plaster Boards - Specification - Part 2 : Coated/Laminated Sypsum Plaster
Boards
IS 2095 : Part 3 : 1996 Specification for gypsum plaster boards Part 3 Reinforced Gypsum plaster boards
IS 2469 : 1976 Glossary of terms relating to gypsum
IS 2541 : 1991 Code of practice for preparation and use of lime concrete
IS 2542 : Part 1 : Sec 1 to 12 : 1978 Methods of Test for Gypsum Plaster, Concrete and Products - Part I :
Plaster and Concrete
IS 2542 : Part II : Sec 1 to 8 : 1981 Methods of Test for Gypsum Plaster, Concrete and Products - Part II :
Gypsum Products
IS 2547 : Part 1 : 1976 Specification for gypsum building plaster: Part 1 Excluding premixed lightweight plaster
IS 2547 : Part 2 : 1976 Specification for gypsum building plaster: Part 2 Premixed lightweight plaster
IS 2686 : 1977 Specification for Cinder as Fine Aggregates for use in Lime Concrete
IS 2849 : 1983 Specification for non-load bearing gypsum partition blocks (solid and hollow types)
IS 3068 : 1986 Specification for broken brick (burnt clay) coarse aggregates for use in lime concrete
IS 3115 : 1992 Specification for lime based blocks
IS 3182 : 1986 Specification for broken brick (burnt clay) fine aggregates for use in lime mortar
IS 4098 : 1983 Specification for lime-pozzolana mixture

7
IS 4139 : 1989 Specification for calcium silicate bricks
IS 5817 : 1992 Code of practice for preparation and use of lime-pozzolana mixture concrete in buildings and
roads
IS 6508 : 1988 Glossary of terms relating to building lime
IS 6932 : Part 1 : 1973 Method of test for building limes Part 1 Determination of insoluble residue, loss on
ignition, insoluble matter, silicone dioxide, ferric and aluminium oxide, calcium oxide and magnesium oxide
IS 6932 : Part 2 : 1973 Method of test for building limes Determination of carbon dioxide content
IS 6932 : Part 3 : 1973 Method of test for building limes Determination of residue on slaking of quicklime
IS 6932 : Part 4 : 1973 Method of test for building limes Determination of fineness of hydrated lime
IS 6932 : Part 5 : 1973 Method of test for building limes Determination of unhydrated oxide
IS 6932 : Part 6 : 1973 Method of test for building limes Determination of volume yield of quicklime
IS 6932 : Part 7 : 1973 Method of test for building limes Determination of compressive and transverse strength
IS 6932 : Part 8 : 1973 Method of test for building limes Determination of workability
IS 6932 : Part 9 : 1973 Method of test for building limes Determination of soundness
IS 6932 : Part X : 1973 Methods of Tests for Building Limes - Part X : Determination of Popping and Pitting of
Hydrated Lime
IS 6932 : Part 11 : 1983 Methods of Tests for Building Limes - Part 11 : Determination of Insoluble Setting Time
of Hydrated Lime
IS 8272 : 1984 Specification for gypsum plaster for use in the manufacture of fibrous plaster boards
IS 9498 : 1980 Specification for inorganic aggregates for use in gypsum plaster
IS 10049 : 1981 Code of practice for manufacture of lime based blocks
IS 10359 : 1982 Code of practice for manufacture and use of lime-pozzolana concrete blocks for paving
IS 10360 : 1982 Specification for lime-pozzolana concrete blocks for paving
IS 10772 : 1983 Specification for quick setting lime pozzolana mixture
IS 12654 : 1989 Code of practice for use of low grade gypsum in building industry
IS 12679 : 1989 Specification for By-product gypsum for use in plaster, blocks and boards
IS 12894 : 2002 Pulverized Fuel Ash-Lime Bricks - Specification
IS 13001 : 1991 Guidelines for manufacture of gypsum plaster in Mechanized pan system
IS 14401 : 1996 Guidelines for handling and storage of building limes
IS 14860 : 2000 Guidelines on Fuel Saving in Vertical Mixed-feed Lime Shaft Kilns

CED-5 FLOORING, WALL FINISHING AND ROOFING Number of Standards -- 74

Standard Description
IS 653 : 1992 Specification for linoleum sheets and tiles
IS 657 : 1982 Specification for materials for use in the manufacture of magnesium oxychloride flooring
compositions
IS 658 : 1982 Code of practice for magnesium oxychloride composition floors
IS 809 : 1992 Specification for rubber flooring materials for general purposes
IS 1195 : 2002 Bitumen-Mastic for Flooring - Specification
IS 1196 : 1978 Code of practice for laying bitumen mastic flooring
IS 1197 : 1970 Code of practice for laying of rubber floors
IS 1198 : 1982 Code of practice for laying, fixing and maintenance of linoleum floor
IS 1237 : 1980 Specification for Cement Concrete Flooring Tiles

8
IS 1443 : 1972 Code of practice for laying and finishing of cement concrete flooring tiles
IS 1542 : 1992 Specification for sand for plaster
IS 1630 : 1984 Specification for mason's tools for plaster work and pointing work
IS 1661 : 1972 Code of practice for application of cement and cement-lime plaster finishes
IS 2114 : 1984 Code of practice for laying in-situ terrazzo floor finish
IS 2394 : 1984 Code of practice for application of lime plaster finish
IS 2402 : 1963 Code of Practice for External Rendered Finishes
IS 2571 : 1970 Code of practice for laying in-situ cement concrete flooring
IS 3461 : 1980 Specification for PVC-asbestos floor tiles
IS 3462 : 1986 Specification for unbacked flexible PVC flooring
IS 3464 : 1986 Methods of Test for Plastic Flooring and Wall Tiles
IS 4441 : 1980 Code of practice for use of silicate type chemical resistant mortars
IS 4442 : 1980 Code of practice for use of sulphur type chemical resistant mortars
IS 4443 : 1980 Code of practice for use of resin type chemical resistant mortars
IS 4456 : Part I : 1967 Methods of Test for Chemical Resistant Mortars - Part I : Silicate Type and Resin Type
IS 4456 : Part 2 : 1967 Methods of test for chemical resistant mortars: Part II Sulphur type
IS 4457 : 1982 Specification for ceramic unglazed vitreous acid resisting tile
IS 4631 : 1986 Code of practice for laying of epoxy resin floor toppings
IS 4832 : Part 1 : 1969 Specification for chemical resistant mortars: Part I Silicate type
IS 4832 : Part II : 1969 Specification for Chemical Resistant Mortars - Part II : Resin type
IS 4832 : Part 3 : 1968 Specification for chemical resistant mortars: Part III Sulphur type
IS 4860 : 1968 Specification for acid-resistant bricks
IS 4971 : 1968 Recommendations for selection of industrial floor finishes
IS 5317 : 2002 Pitch-Mastic for Bridge Decking and Roads - Specification
IS 5318 : 1969 Code of practice for laying of flexible PVC sheet and tile flooring
IS 5491 : 1969 Code of practice for laying of in-situ granolithic concrete flooring topping
IS 5766 : 1970 Code of practice for laying of burnt clay brick flooring
IS 6278 : 1971 Code of Practice for Whitewashing and Colour-washing
IS 7956 : 1975 Recommendations for selection of dairy floor finishes
IS 8374 : 1977 Specification for Bitumen Mastic, Anti-Static and Electrically Conducting Grade
IS 9162 : 1979 Methods of Tests for Epoxy Resins, Hardeners and Epoxy Resin Compositions for Floor
Topping
IS 9197 : 1979 Specification for epoxy resin, hardners and epoxy resin compositions for floor topping
IS 9510 : 1980 Specification for bitumen mastic acid-resisting grade
IS 9704 : 1980 Methods of tests for linoleum sheets and tiles
IS 10132 : 1932 Method of Test for Materials for Use in the Preparation of Magnesium Oxychloride Flooring
Compositions
IS 10403 : 1983 Glossary of terms relating to building finishes
IS 12583 : 1988 Specification for corrugated bitumen roofing sheets
IS 12866 : 1989 Specification for plastic translucent sheets made from thermosetting polyester resin (glass
fibre reinforced)
IS 13026 : 1991 Specification for bitumen mastic for flooring for industries handling LPG and other light
hydrocarbon products
IS 13074 : 1991 Code of practice for laying of bitumen mastic flooring for industries handling LPG and other
light hydrocarbon products

9
IS 13630 : Part 1 : 1993 Methods of test for ceramic tiles Part 1 Determination of dimensions and surface
quality
IS 13630 : Part 2 : 1992 Methods of test for ceramic tiles Part 2 Determination of water absorption
IS 13630 : Part 3 : 1992 Methods of test for ceramic tiles Part 3 Determination of moisture expansion using
boiling water - Unglazed tiles
IS 13630 : Part 4 : 1992 Methods of test for ceramic tiles Part 4 Determination of linear thermal expans ion
IS 13630 : Part 5 : 1992 Methods of test for ceramic tiles Part 5 Determination of resistance to thermal shock
IS 13630 : Part 6 : 1993 Methods of test for ceramic tiles Part 6 Determination of modulus of rupture
IS 13630 : Part 7 : 1993 Methods of test for ceramic tiles Part 7 Determination of chemical resistance -
Unglazed tiles
IS 13630 : Part 8 : 1993 Methods of test for ceramic tiles Part 8 Determination of chemical resistance - Glazed
tiles
IS 13630 : Part 9 : 1993 Methods of test for ceramic tiles Part 9 Determination of crazing resistance - Glazed
tiles
IS 13630 : Part 10 : 1993 Methods of test for ceramic tiles Part 10 Determination of frost resistance
IS 13630 : Part 11 : 1993 Methods of test for ceramic tiles Part 11 Determination of resistance to surface
abrasion - Glazed tiles
IS 13630 : Part 12 : 1993 Methods of test for ceramic tiles Part 12 Determination of resistance to deep abrasion
- Unglazed tiles
IS 13630 : Part 13 : 1993 Methods of test for ceramic tiles Part 13 Determination of scratch hardness of surface
according to Mohs'
IS 13711 : 1993 Ceramic tiles - Sampling and basis for acceptance
IS 13712 : 1993 Ceramic tiles - Definitions, classifications, characteristics and marking
IS 13753 : 1993 Specification for dust pressed ceramic tiles with water absorption of E > 10% Group (B III)
IS 13754 : 1993 Specification for dust pressed ceramic tiles with water absorption of 6% < II (B Group 10% <>
IS 13755 : 1993 Specification for dust pressed ceramic tiles with water absorption of 3% < E < 6% Group (B II
a)
IS 13756 : 1993 Specification for dust pressed ceramic tiles with low water absorption of E < 3% Group B I
IS 13801 : 1993 Chequered cement concrete tiles - Specification
IS 15193 : 2002 Laying of Pitch-Mastic Flooring for Industries Handling Heavy Hydrocoarbon Products Like
Kerosene, Diesel and Furnace Oil - Code of Practice
IS 15194 : 2002 Pitch-Mastic Flooring for Industries Handling Heavy Hydrocarbon Products Like Kerosene,
Diesel and Furnace Oil - Specification
IS 15224 : 2002 Laying of Plastic Translucent Sheets Made from Thermosetting Polyester Resin (Glass Fibre
Reinforced) Alone or in Conjunction with Asbestos Cement Sheets/Steel Sheets/Aluminium Sheets - Code of
Practice
IS 15401 : 2003 Wall Coverings in Roll Form - Vocabulary and Symbols
IS 15418 : 2003 Wall Coverings in Roll Form for Finished Wall Papers, Wall Vinyls and Plastic Wall Coverings -
Specification

CED-6 STONES Number of Standards -- 41

Standard Description
IS 1121 : Part 1 : 1974 Methods of test for determination of strength properties of natural building stones: Part I
Compressive strength
IS 1121 : Part II : 1974 Methods of Test for Determination of Strength Properties of Natural Building Stones -
Part II : Transverse Strength
IS 1121 : Part III : 1974 Methods of Test for Determination of Strength Properties of Natural Building Stones -
Part III : Tensile Strength

10
IS 1121 : Part 4 : 1974 Methods of test for determination of strength properties of natural building stones: Part
IV Shear strength
IS 1122 : 1974 Method of test for determination of true specific gravity of natural building stones
IS 1123 : 1975 Method of identification of natural building stones
IS 1124 : 1974 Method of test for determination of water absorption, apparent specific gravity and porosity of
natural building stones
IS 1125 : 1974 Method of test for determination of weathering of natural building stones
IS 1126 : 1974 Method of test for determination of durability of natural building stones
IS 1127 : 1970 Recommendations for dimensions and workmanship of natural building stones for masonry
work
IS 1128 : 1974 Specification for Limestone (Slab and Tiles)
IS 1129 : 1972 Recommendation for dressing of natural building stones
IS 1130 : 1969 Specification for marble (blocks, slabs and tiles)
IS 1706 : 1972 Method for determination of resistance to wear by abrasion of natural building stones
IS 1805 : 1973 Glossary of terms relating to stones, quarrying and dressing
IS 3316 : 1974 Specification for structural granite
IS 3620 : 1979 Specification for laterite stone block for masonry
IS 3622 : 1977 Specification for sandstone (slabs and tiles)
IS 4121 : 1967 Method of test for determination of water transmission rate by capillary action through natural
building stones
IS 4122 : 1967 Method of test for surface softening of natural building stones by exposure to acidic
atmospheres
IS 4348 : 1973 Methods of test for determination of permeability of natural building stones
IS 5218 : 1969 Method of Test for Toughness of Natural Building Stones
IS 5640 : 1970 Method of test for determining aggregate impact value of soft coarse aggregates
IS 6241 : 1971 Method of Test for Determination of Stripping Value of Road Aggregates
IS 6250 : 1981 Specification for Roofing Slate Tiles
IS 6579 : 1981 Specification for Coarse Aggregate for Water Bound Macadam
IS 7779 : Part 1 : Sec 1 : 1975 Schedule for properties and availability of stones for construction purposes: Part
I Gujarat state Section 1 Availability of stones
IS 7779 : Part 1 : Sec 2 : 1975 Schedule for properties and availability of stones for construction purposes: Part
I Gujarat state: Section 2 Engineering properties of building stones
IS 7779 : Part 1 : Sec 3 : 1975 Schedule for properties and availability of stones for construction purposes: Part
I Gujarat state: Section 3 Engineering properties of stone aggregates
IS 7779 : Part 2 : Sec 1 : 1979 Schedule for properties and availability of stones for construction purposes: Part
II Maharashtra state Section 1 Availability of stones
IS 7779 : Part 2 : Sec 2 : 1979 Schedule for properties and availability of stones for construction purposes: Part
II Maharashtra state Section 2 Engineering properties of building stones
IS 7779 : Part II : Sec 3 : 1979 Schedule for Properties and Availability of Stones for Construction Purposes -
Part II : Maharashtra State - Section 3 : Engineering Properties of Stone Aggregates
IS 7779 : Part III : Sec 2 : 1980 Schedule for Properties and Availability of Stones for Construction Purposes -
Part III : Tamil Nadu State - Section 2 : Engineering Properties of Building Stones
IS 7779 : Part III : Sec 3 : 1980 Schedule for Properties and Availability of Stones for Construction Purposes -
Part III : Tamil Nadu State - Section 3 : Engineering Properties of Stone Aggregates
IS 7779 : Part 4 : Sec 1 to 3 : 1996 Schedule of properties and availability of stones for construction purposes
Part IV Karnataka states Sections (1 to 3)
IS 7779 : Part 5 : Sec 1 to 3 : 1997 Schedule for Properties and Availability of Stones for Construction
Purposes - Part 5 : Andhra Pradesh State - Sections 1 to 3

11
IS 8348 : 1977 Code of practice for stacking and packing of stone slabs for transportation
IS 8381 : 1977 Recommended practice for quarrying stones for construction purposes
IS 8759 : 1977 Code of practice for maintenance and preservation of stones in building
IS 9394 : 1979 Specification for stone lintels
IS 14223 : Part 1 : 1995 Specification for polished building stones: Part 1 Granite

CED7 -- Structural Engineering Number of Standards -- 36

Standard Description
SP 6 : Part 1 : 1964 Handbook for structural engineers - Structural steel sections
SP 6 : Part 2 : 1962 Handbook For Structural Engineers - 2 : Steel Beams and Plate Girders
SP 6 : Part 3 : 1962 Handbook Structural Engineers - Part 3 : Steel Columns and Struts
SP 6 : Part 4 : 1969 ISI Handbook for Structural Engineers 4. Use of High Strength Friction Grip Bolts
SP 6 : Part 5 : 1980 Handbook for structural engineers - Cold-formed, light gauge steel structures
SP 6 : Part 6 : 1972 Handbook for structural engineers - Application of plastic theory in design of steel
structures
SP 38 (S and T) : 1987 Handbook of Typified Designs for Structures with Steel Roof Trusses (with and without
Cranes) (Based on is Codes)
SP 40 (S and T) : 1987 Handbook on Structures with Steel Portal Frames
SP 47 (S and T) : 1988 Handbook on Structures with Steel Lattice Portal Frames (Without Cranes)
IS 800 : 1984 Code of practice for general construction in steel
IS 801 : 1975 Code of practice for use of cold formed light gauge steel structural members in general building
construction
IS 802 : Part 1 : Sec 1 : 1995 Code of practice for use of structural steel in overhead transmission line towers,
Part 1 Materials and Loads and permissible stresses Section 1 Materials and Loads
IS 802 : Part 1 : Sec 2 : 1992 Code of practice for use of structural steel in overhead transmission line towers
Part 1 : Material, loads and permissible stress Section 2 Permissible stress
IS 802 : Part II : 1978 Code of Practice for Use of Structural Steel in Overhead Transmission Line Towers -
Part II : Fabrication, Galvanizing, Inspection and Packing
IS 802 : Part 3 : 1978 Code of practice for use of structural steel in overhead transmission line towers, part 3
Testing
IS 803 : 1976 Code of Practice for Design Fabrication and Erection of Vertical Mild Steel Cylindrical Welded Oil
Storage Tanks
IS 804 : 1967 Rectangular pressed steel tanks
IS 805 : 1968 Code of Practice for Use of Steel in Gravity Water Tanks
IS 806 : 1968 Code of practice for use of steel tubes in general building construction
IS 2750 : 1964 Specification for Steel Scaffoldings
IS 4000 : 1992 Code of practice for high strength bolts in steel structures
IS 4014 : Part 1 : 1967 Code of practice for steel tubular scaffolding Part 1 Definitions and materials
IS 6533 : Part 1 : 1989 Code of practice for design and construction of steel chimneys Part 1 Mechanical
aspects )
IS 6533 : Part 2 : 1989 Code of practice for design and construction of steel chimneys Part 2 Structural aspects
IS 7205 : 1974 Safety Code for Erection of Structural Steelwork
IS 7215 : 1974 Tolerances for fabrication of steel structures
IS 8081 : 1976 Specification for slotted sections

12
IS 8147 : 1976 Code of Practice for Use of Aluminium Alloys in Structures
IS 8640 : 1977 Recommendations for dimensional parameters for industrial building
IS 9178 : Part 1 : 1979 Criteria for design of steel bins for storage of bulk materials Part 1 General
requirements and assessment of loads
IS 9178 : Part 2 : 1979 Criteria for design of steel bins for storage of bulk material Part 2 Design storage criteria
IS 9178 : Part 3 : 1980 Criteria for design of steel bins for storage of bulk materials Part 3 Bins designed for
mass flow and funnel flow
IS 9964 : Part 1 : 1981 Recommendations for maintenance and operation of petroleum storage tanks Part 1
Preparation of tanks for safe entry and work
IS 9964 : Part II : 1981 Recommendations for Maintenance and Operation of Petroleum Storage Tanks - Part II
: Inspection
IS 10987 : 1992 Code of practice for design, fabrication, testing and installation of underground/above ground
horizontal cyclindrical storage tanks for petroleum products
IS 12843 : 1989 Tolerances for erection of steel structures

CED-8 STRUCTURAL SECTION Number of Standards -- 28

Standard Description
IS 808 : 1989 Dimensions for Hot Rolled Steel Beam, Column, Channel and Angle Sections
IS 811 : 1987 Cold formed light gauge structural steel sections
IS 1173 : 1978 Hot rolled slit steel tee bars
IS 1252 : 1991 Dimensions of hot rolled steel bulb angles
IS 1730 : 1989 Dimensions for steel plates,sheets strips and flats for general engineering purposes
IS 1732 : 1989 Dimensions for round and square steel bars for structural and general engineering purposes
IS 1852 : 1985 Rolling and cutting tolerances for hot rolled steel products
IS 1863 : 1979 Hot rolled steel bulb flats
IS 1864 : 1979 Hot-rolled steel L-sections for shipbuilding
IS 2314 : 1986 Specification for Steel Sheet Piling Sections
IS 2713 : Parts I to III : 1980 Specification for Tubular Steel Poles for Overhead Power Lines
IS 3443 : 1980 Crane rail sections
IS 3908 : 1986 Aluminium equal leg angles
IS 3909 : 1986 Specification for Aluminium Unequal Leg Angles
IS 3921 : 1985 Aluminium channels
IS 3954 : 1991 Hot Rolled Steel Channel Sections for General Engineering Purposes - Dimensions
IS 3964 : 1980 Light rails
IS 5384 : 1985 Aluminium I-beam
IS 5488 : 1987 Dimensions and dimensional tolerances for hot rolled steel plates for ship's hull structure
IS 6445 : 1985 Aluminium tee-sections
IS 6449 : 1987 Aluminium bulb angles for marine application
IS 6475 : 1987 Aluminium tee bars for marine application
IS 6476 : 1987 Aluminium bulb plates for marine application
IS 7452 : 1990 Specificatiion for hot-rolled steel sections for doors, windows and ventilators
IS 10182 : Part I : 1982 Dimensions and Tolerances for Hot Rolled Track Shoe Sections - Part I : Section TS-
L1
IS 10182 : Part 2 : 1985 Dimensions and tolerances for hot-rolled track shoe sections
IS 12778 : 1989 Hot rolled steel parallel flange beam and column sections – Dimensions

13
IS 12779 : 1989 Rolling and cutting tolerances for hot rolled parallel flange beam and column sections

CED-9 TIMBER Number of Standards – 141

Standard Description
IS 10 : Part 1 : 1990 Specification for plywood tea-chests, Part 1 General
IS 10 : Part 2 : 1996 Specification for plywood tea-chest: Part 2 Plywood
IS 10 : Part 3 : 1974 Specification for plywood tea-chests, Part 3 Battens
IS 10 : Part 4 : 1989 Specification for plywood tea-chests, Part 4 Metal fittings
IS 10 : Part 5 : 1976 Specification for plywood tea-chests, Part 5 Assembly and packing
SP 33 : 1986 Handbook on Timber Engineering
IS 190 : 1991 Specification for coniferous sawn timber (baulks and scantling)
IS 287 : 1993 Permissible Moisture Content for Timber Used for Different Purposes - Recommendations
IS 399 : 1963 Classification of Commercial Timbers and Their Zonal Distribution
IS 401 : 2001 Preservation of Timber - Code of Practice
IS 620 : 1985 Specification for wooden tool handles general requirements
IS 656 : 1988 Specification for logs for plywood
IS 707 : 1976 Glossary of terms applicable to timber technology and utilization
IS 876 : 1992 Specification for wood poles for overhead power and telecommunication lines
IS 1140 : 1988 Specification for Logs for Matches
IS 1141 : 1993 Code of practice for seasoning of timber
IS 1150 : 2000 Trade Names and Abbreviated Symbols for Timber Species
IS 1326 : 1992 Specification for non-coniferous sawn timber (baulks and scantling)
IS 1329 : 1975 Specification for aircaraft timber (baulks and scantlings)
IS 1331 : 1971 Specification for cut sizes of timber
IS 1503 : 1988 Wooden packing cases
IS 1707 : 1979 Specification for wood wool for general packaging purposes
IS 1708 : Parts 1 to 18 : 1986 Methods of Testing of Small Clear Specimens of Timber
IS 1898 : 1990 Specification for timber for aircraft construction in converted form (finished form)
IS 1900 : 1974 Method of tests for wood poles
IS 1902 : 1993 Code of practice for preservation of bamboo and cane for non-structural purposes
IS 2133 : 1983 Specification for wooden tent pins
IS 2178 : 1962 Specification for Timber for Use in Aircraft Propeller Construction
IS 2179 : 1979 Specification for converted timber for lorry bodies
IS 2203 : 1993 Specification for wooden cross arms
IS 2372 : 1991 Specification for timber for cooling towers
IS 2377 : 1967 Tables for volume of cut sizes of timber
IS 2408 : 1963 Method of static tests of timber in structural sizes
IS 2455 : 1990 Method of sampling of model trees and logs and their conversion for timber testing
IS 2674 : 1988 Specification for battened plywood cases
IS 2683 : 1980 Guide for Installation of Impregnation Plants for Timber
IS 2753 : Part 1 : 1991 Methods for estimation of preservatives in treated timber and in solutions Part 1
Deterrmination of copper, arsenic, chromium, zinc, boron creosote and fuel oil
IS 2753 : Part 2 : 1991 Methods for estimation of preservatives in treated timber and in treating solutions: Part
2 Determination of copper (in copper organic salt) and pentachlorophenol

14
IS 2891 : 1975 Specification for wooden handles for felling axes and hand axes
IS 2892 : 1993 Wooden Handles for Picks and Beaters – Specification
IS 2893 : 1992 Wooden Handles for Adzes – Specification
IS 2894 : 1987 Specification for wooden handles for wood working chisels and gouges
IS 2895 : 1990 Specification for wooden handles for engineers' file and engineers' scrapers
IS 2896 : 1978 Specification for wooden handles for carpenters' augers
IS 2897 : 1983 Specification for wooden handles for shovels
IS 2922 : 1975 Specification for wooden tent mallets
IS 3053 : 1977 Specification for cane baskets for general purposes
IS 3071 : 1981 Specification for wooden crates
IS 3084 : 1989 Specification for pencil slats
IS 3337 : 1978 Specification for ballies for general purposes
IS 3364 : Part 1 : 1976 Methods of measurement and evaluation of defects in timber: Part 1 Logs
IS 3364 : Part 2 : 1976 Methods of measurement and evaluation of defects in timber: Part 2 Converted timber
IS 3386 : 1979 Specification for Wooden Fence Posts
IS 3728 : 1985 Specification for wooden boxes for packaging of apples
IS 3731 : 1985 Specification for teak squares
IS 3805 : 1979 Specification for pent-top wooden cases
IS 3806 : 1966 Specification for wooden beaters
IS 4422 : 1985 Specification for willow clefts for cricket bats
IS 4423 : 1999 Hand-Sawing of Timber – Guide
IS 4424 : 1967 Specification for timber for use in coal mines
IS 4435 : 1967 Specification for wooden ladders and trestles
IS 4650 : 1968 Specification for anvil wooden blocks
IS 4833 : 1993 Methods for Field Testing of Preservatives in Wood
IS 4873 : 1993 Method for laboratory testing of wood preservatives against fungi
IS 4895 : 1985 Specification for teak logs
IS 4907 : 1968 Methods of testing timber connectors
IS 4953 : 1989 Specification for wooden handles for hand hammers
IS 4970 : 1973 Key for identification of commercial timbers
IS 5246 : 2000 Coniferous Logs – Specification
IS 5247 : Part 1 : 1982 Specification for converted timber (coniferous) : Part 1 Light furniture
IS 5247 : Part 2 : 1982 Specification for converted timber (coniferous) : Part 2 Packing cases amd crates
IS 5248 : 1988 Specification for teak logs for production of sliced veneers
IS 5806 : 1970 Specification for Non-coniferous Timber in Converted form for Ammunition/Explosives Boxes
IS 5942 : 1989 Specification for wooden handles for POWRAHS
IS 5966 : 1993 Specification for non-coniferous timber in converted form for general purposes
IS 5978 : 1970 Code of Practice for Design of Wood Poles for Overhead Power and Telecommunication Lines
IS 6056 : 1970 Specification for Jointed Wood Poles for Overhead Power and Telecommunication Lines
IS 6341 : 1971 Method for laboratory test for efficacy of wood preservatives against soft rot
IS 6342 : 1987 Specification for rosewood logs for production of sliced veneers
IS 6346 : 1971 Method of Tests for Timber Props for Mines
IS 6497 : 1990 Method of test for the efficacy of preservatives and evaluating the natural durability of timbers
used in cooling towers

15
IS 6534 : 1971 Guiding principles of grading and inspection of timber
IS 6641 : 1985 Specification for wooden disc for tents
IS 6642 : 1986 Specification for mason's mallets
IS 6643 : 1987 Specification for wooden pins for bivouac tents
IS 6644 : 1986 Specification for tinman's mallets
IS 6656 : 1986 Specification for caulking mallets
IS 6662 : 1993 Timber Species Suitable for Wooden Packaging - Specification
IS 6676 : 1986 Specification for bossing (plumbers), mallets
IS 6703 : 1972 Glossary of wooden packaging terms
IS 6707 : 1972 Specification for willow logs for artificial limbs
IS 6711 : 1972 Code of practice for maintenance of wood poles for overhead power and telecommunication
lines
IS 6729 : 1972 Specification for wooden paddles
IS 6791 : 1973 Method of Testing Natural Durability of Timber and Efficacy of the Wood Preservatives Against
Marine Borers
IS 6874 : 1973 Method of Tests for Round Bamboos
IS 7308 : 1999 Non-coniferous Logs – Specification
IS 7315 : 1974 Guidelines for Design, Installation and Testing of Timber Seasoning Kilns (Compartment Type
with Cross-forced Air Circulation)
IS 7344 : 1974 Specification for bamboo tent poles
IS 7548 : 1992 Specification for vase for store tent
IS 7549 : 1975 Specification for timber half wrought for sporting rifles
IS 7550 : 1975 Specification for cane baskets for ration
IS 7630 : 1975 Specification for plywood drums
IS 7698 : 1983 Specification for returnable wooden crates for vegetables
IS 7850 : 1975 Specification for wooden box for microscope slides
IS 7992 : 1983 Specification for plywood cases for packing tobacco for export
IS 8001 : 1976 Specification for Packaging of Plywood, Blockboards and Flush Doors for Export
IS 8242 : 1976 Methods of tests for split bamboos
IS 8292 : 1992 Method of test for evaluation of working quality of timber under different wood working
operations
IS 8295 : Part 1 : 1976 Specification for bamboo chicks: Part 1 Fine
IS 8295 : Part 2 : 1976 Specification for bamboo chicks: Part 2 Coarse
IS 8720 : 1978 Methods of sampling timber scantlings from depots and their conversion for testing
IS 8725 : 1978 Specification for wirebound wooden boxes
IS 8726 : 1978 Specification for wirebound wooden crates
IS 8745 : 1994 Methods of presentation of data of physical and mechanical properties of timber
IS 9096 : 1979 Code of practice for preservation of bamboos for structural purposes
IS 9104 : 1979 Guide for storage and protection of logs and sawn timber
IS 9561 : 1985 Code of practice for felling and conversion of trees into logs
IS 9576 : 1980 Guide for mill sawing of timber
IS 9590 : 1980 Specification for non-returnable wooden boxes for horticulture produce
IS 10013 : Part 1 : 1981 Specification for water soluble type wood preservatives: Part 1 Acid-copper-chrome
(ACC) preservative
IS 10013 : Part 2 : 1981 Specification for water soluble type wood preservatives: Part 2 Copper-chrome-arsenic
(CCA) wood preservative

16
IS 10013 : Part 3 : 1981 Specification for water soluble type wood preservatives: Part 3 Copper-chrome-boron
(CCB) wood preservative
IS 10145 : 1982 Specification for bamboo supports for camouflaging equipment
IS 10324 : 1982 Specification for wooden crates for bottled drinks
IS 10394 : 1982 Specification for wooden sleepers for railway track
IS 10402 : 1982 Specification for pin-needle hard board boxes for packaging of apples
IS 10420 : 1982 Method of determination of sound absorption co-efficient of timber by standing wave method
IS 10499 : 1983 Specification for wooden-toggles
IS 10687 : 1983 Guidelines for nailing of large frames wooden containers
IS 10753 : 1983 Code of practice for preservation of wooden sleepers for railway track by pressure treatment
IS 10754 : 1983 Method of determination of thermal conductivity of timber
IS 11100 : 1984 Specification for sweeping brooms
IS 11106 : 1984 Specification for carpenter's mallets
IS 11131 : 1984 Specification for wooden casks and barrels
IS 11215 : 1991 Methods for determination of moisture content of timber and timber products
IS 11288 : 1985 Recommendations for off road transportation of timber
IS 12896 : 1990 Classification of Indian timbers for door and window shutters and frames
IS 13240 : 1991 Specification for walnut logs for production of sliced veneers
IS 13621 : 1993 Method of test for determination of dielectric constant of wood under microwave frequencies
IS 13622 : 1993 Classification of Indian timbers for furniture and cabinets
IS 14960 : 2001 Preservative Treated and Seasoned Sawn Timber From Rubber Wood (Hevea brasiliensis) –
Specification

CED-10 PLANNING, BYE –LAWS AND DIMENSIONAL CO-ORINATON Number of Standards -- 27

Standard Description
IS 962 : 1989 Code of practice for architectural and building drawings
IS 1553 : 1989 Design of Library Buildings - Recommendations Relating to its Primary Elements
IS 2661 : 1978 Specification for mobile library van
IS 2662 : 1978 Specification for packages for use of libraries
IS 2663 : 1989 Design of buildings for archives - Recommendations relating to its primary elements
IS 4878 : 1986 Byelaws for construction of cinema buildings
IS 4919 : 1981 Glossary of terms applicable to landscape and horticulture work
IS 4993 : 1983 Glossary of terms relating to modular co-ordination
IS 5197 : 1987 Recommendations for layout and planning of drawings offices
IS 6408 : Part 1 : 1990 Recommendations for Modular Co-ordination in Building Industry : Tolerances - Part 1 :
Glossary of Terms
IS 6408 : Part 2 : 1992 Recommendations for modular co-ordination in building industry: Tolerances Part 2
Principles and applications
IS 6820 : 1987 Recommendations for modular co-ordination in building industry: Applications
IS 7564 : Part 1 : 1974 Recommendations for co-ordination of dimensions in buildings-Arrangements of
building components and assemblies: Part 1 Functional group 1 Structures
IS 7564 : Part 2 : 1974 Recommendations for co-ordination of dimensions in buildings-Arrangements of
buidings components and assemblies: Part 2 Functional group 2 External envelope
IS 7564 : Part 3 : 1974 Recommendations for co-ordination of dimensions in buildings-Arrangements of
building components and assemblies: Part 3 Functional group 3 internal subdivision

17
IS 7564 : Part 4 : 1975 Recommendations for co-ordination of dimensions in buildings-Arrangements of buiding
components and assemblies: Part 4 Functional group 4 services and drainage
IS 7564 : Part 5 : 1974 Recommendations for co-ordination of dimensions in buildings-Arrangements of
building components and assemblies: Part 5 Functional group 5 Fixtures furniture and equipment
IS 7921 : 1987 Recommendations for modular co-ordination in building industry : Horizontal co-ordination
IS 7922 : 1987 Recommendations for modular co-ordination in building industry: Vertical co-ordination
IS 7973 : 1976 Code of practice for architectural and building working drawings
IS 8338 : 1976 Recommendations relating to primary elements in the design of school library buildings
IS 10316 : 1986 Recommendations for modular co-ordination - basic module and submodular increments
(Equivalent to ISO 1006 : 1973 and ISO 6514 : 1982)
IS 10600 : 1983/ISO 2848 : 1974 Recommendations for modular co-ordination - principles and rules
IS 11775 : 1986 Recommendations for modular co-ordination: notations and symbols for modular drawings
IS 12073 : 1987 Recommendations for modular co-ordination: Co-ordinating sizes for doorsets and windowsets
IS 13612 : Part 1 : 1993 Modular co-ordination for normal brickwork - Recommendation Part 1 Burnt clay bricks
IS 13613 : 1992 Recommendations for modular co-ordination in building industry: Location of structural walls
and floor slabs

CED-11 DOORS AND WINDOWS Number of Standards -- 25

Standard Description
IS 1003 : Part 1 : 2003 Timber Panelled and Glazed Shutters - Specification
IS 1003 : Part 2 : 1994 Specification for timber panelled and glazed shutters: Part 2 Window ventilator shutters
IS 1038 : 1983 Specification for steel doors, windows and ventilators
IS 1081 : 1960 Code of practice for fixing and glazing of metal (steel and aluminium) doors, windows and
ventilators
IS 1361 : 1978 Specification for steel windows for industrial buildings
IS 1826 : 1961 Specification for Venetian Blinds for Windows
IS 1948 : 1961 Specification for aluminium doors, windows and ventilators
IS 1949 : 1961 Specification for Aluminium Windows for Industrial Buildings
IS 2191 : Part 1 : 1983 Specification for Wooden Flush Door Shutters (Cellular and Hollow Core Type) - Part 1 :
Plywood Face Panels
IS 2191 : Part 2 : 1983 Specification for wooden flush door shutters (cellular and hollow core type): Part 2
Particle board and hardboard face panels
IS 2202 : Part 1 : 1999 Specification for wooden flush door shutters (solid core type): Part 1 Plywood face
panels
IS 2202 : Part 2 : 1983 Specification for wooden flush door shutters (solid core type): Part 2 Particle board face
panels and hardboard face panels
IS 4020 : Parts 1 to 16 : 1998 Door Shutters - Methods of Tests
IS 4021 : 1995 Timber Door, Window and Ventilator Frames - Specification
IS 4043 : 1969 Recommendations for Symbolic Designation of Direction of Closing and Faces of Doors,
Windows and Shutters
IS 4351 : 2003 Steel Door Frames - Specification
IS 4913 : 1968 Code of Practice for Selection, Installation and Maintenance of Timber Doors and Windows

18
IS 4962 : 1968 Specification for wooden side sliding doors
IS 6198 : 1992 Specification for ledged, braced and battened timber door shutters
IS 6248 : 1979 Specification for Metal Rolling Shutters and Rolling Grills
IS 10428 : 1983/ISO 1804 : 1972 Glossary of terms relating to doors
IS 10451 : 1983 Specification for steel sliding shutters (top hung type)
IS 10521 : 1983 Specification for collapsible gates
IS 14856 : 2000 Glass Fibre Reinforced Plastic (GRP) Panel Type Door Shutters for Internal Use -
Specification
IS 15380 : 2003 Moulded Raised High Density Fibre (HDF) Panel Doors - Specification

CED-12 FUNCTIONAL REQUIREMENTS IN BUILDINGS Number of Standards -- 23

Standard Description
SP 32 : 1986 Handbook on Functional Requirements of Industrial Buildings (Lighting and Ventilation)
SP 41 (S and T) : 1987 Handbook on Functional Requirements of Buildings (Other than Industrial Buildings)
IS 1950 : 1962 Code of practice for sound insulation of non-industrial buildings
IS 2440 : 1975 Guide for Daylighting of Buildings
IS 2526 : 1963 Code of practice for acoustical design of auditoriums and conferencne halls
IS 3103 : 1975 Code of Practice for Industrial Ventilation
IS 3362 : 1977 Code of practice for natural ventilaltion of residential buildings
IS 3483 : 1965 Code of practice for noise reduction in industrial buildings
IS 3792 : 1978 Guide for heat insulation of non industrial buildings
IS 4954 : 1968 Recommendations for noise abatement in town planning
IS 4963 : 1987 Recommendations for Buildings and Facilities for the Physically Handicapped
IS 5499 : 1969 Code of practice for construction of underground air-raid shelters in natural soil
IS 6060 : 1971 Code of Practice for Daylighting of Factory Buildings
IS 7662 : Part 1 : 1974 Recommendations for orientation of buildings: Part 1 Non-industrial buildings
IS 7942 : 1976 Code of practice for daylighting of educational buildings
IS 8827 : 1978 Recommendations for basic requirements of school buildings
IS 9736 : 1981 Glossary of terms applicable to acoustics in buildings
IS 11050 : Part 1 : 1984 /ISO 717-1 : 1982 Rating of Sound Insulation in Buildings and of Building Elements -
Part 1 : Airborne Sound Insulation in Buildings and of Interior Building Elements
IS 11050 : Part 2 : 1984 /ISO 717-2 : 1982 Rating of Sound Insulation in Buildings and of Building Elements -
Part 2 : Impact Sound Insulation
IS 11050 : Part 3 : 1984 /ISO 717-3 : 1982 Rating of Sound Insulation in Buildings and of Building Elements -
Part 3 : Airborne Sound Insulation of Facade Elements and Facades
IS 11907 : 1986 Recommmendations for calculation of solar radiation on buildings
IS 12332 : 1988 Code of practice for ventilation in petro-chemical plants and refineries
IS 13735 : 1993 /ISO 8201 : 1987 Audible Emergency Evacuation Signal - Specification

CED-13 BUILDING CONSTRUCTION PRACTICE Number of Standards -- 83

Standard Description
SP 10 : 1975 Nomograms for Thickness of Masonry Walls
SP 20 (S and T) : 1991 Handbook on Masonry Design and Construction
SP 21 (S and T) : 1983 Summaries of Indian Standards for Building Materials

19
SP 25 : 1984 Handbook on Causes and Prevention of Cracks in Buildings
SP 62 (S and T) : 1997 Handbook on Building Construction Practices (Excluding Electrical Work)
SP 70 : 2001 Handbook on Construction Safety Practices
IS 883 : 1994 Code of practice for design of structural timber in building
IS 965 : 1963 Specification for equivalent metric units for scales dimensions and quantities in general
construction work
IS 1414 : 1989 Code of practice for fixing wall covering
IS 1597 : Part 1 : 1992 Construction of Stone Masonry - Code of Practice - Part 1 : Rubble Stone Masonry
IS 1597 : Part 2 : 1992 Code of practice for construction of stone masonry: Part 2 Ashlar masonry
IS 1634 : 1992 Code of practice for design and construction of wood stairs for houses
IS 1649 : 1962 Code of practice for design and construction of flues chimneys domestic heating appliances
IS 1834 : 1984 Specification for Hot Applied Sealing Compounds for Joints in Concrete
IS 1838 : Part 1 : 1983 Specification for preformed fillers for expansion joint in pavements and structures (non
extruding and resilient type): Part 1 Bitumen impregnated fibre
IS 1838 : Part 2 : 1984 Specification for preformed fillers for expansion joint in pavements and structures (non
extruding and resilient type) Part 2 CNSL Aldehyde resin and coconut pith
IS 1905 : 1987 Code of Practice for Structural use of Unreinforced Masonry
IS 1946 : 1961 Code of practice for use of fixing devices in walls, ceilings and of solid construction
IS 2110 : 1980 Code of practice for in-situ construction of walls, in building soil-cement
IS 2115 : 1980 Code of practice for flat-roof finish, mud phuska
IS 2116 : 1980 Specification for sand for masonry mortars
IS 2118 : 1980 Code of Practice for Construction of Jack-Arch Type of Built-up Floor or Roof
IS 2119 : 1980 Code of practice for construction of brick-cum-concrete composite (madras terrace) floor and
roof
IS 2204 : 1962 Code of practice for construction of reinforced concrete shell roof
IS 2212 : 1991 Code of practice for brickwork
IS 2250 : 1981 Code of Practice for Preparation and Use of Masonry Mortars
IS 2366 : 1983 Code of practice for nail-jointed timber construction
IS 2441 : 1984 Code of practice for fixing ceiling covering
IS 2527 : 1984 Code of practice for fixing rainwater gutters and downpipes for drainage
IS 2700 : 1987 Code of practice for roofing with wooden shingles
IS 2792 : 1964 Code of practice for design and construction of stone slab over joist floor
IS 2858 : 1984 Code of practice for roofing with mangalore tiles
IS 3414 : 1968 Code of Practice for Design and Installation of Joints in Buildings
IS 3548 : 1988 Code of Practice for Glazing in Buildings
IS 3629 : 1986 Specification for structural timber in building
IS 3630 : 1992 Construction of Non-load Bearing Gypsum Block Partitions - Code of Practice
IS 3670 : 1989 Code of practice for construction of timber floors
IS 4101 : Part 1 : 1967 Code of practice for external facing and veneers: Part I Stone facing
IS 4101 : Part II : 1967 Code of Practice for External Facings and Veneers - Part II : Cement Concrete Facing
IS 4101 : Part 3 : 1985 Code of Practice for External Cladding - Part 3 : Wall Tiling and Mosaics
IS 4407 : 1967 Code of practice for reed walling
IS 4891 : 1988 Specification for preferred cut sizes of structural timber
IS 4920 : 1968 Glossary of terms applicable to roof coverings
IS 4924 : Part 1 : 1968 Method of test for nail jointed timber trusses: Part I Destructive test

20
IS 4924 : Part II : 1968 Method of Test for Nail-jointed Timber Trusses - Part II : Proof Test
IS 4983 : 1968 Code of Practice for Design and Construction of Nailed Laminated Timber Beams
IS 5119 : Part I : 1968 Code of Practice for Laying and Fixing of Sloped Roof Covering - Part I : Slating
IS 5389 : 1969 Code of practice for laying of hardwood parquet and wood block floors
IS 5390 : 1984 Code of practice for construction of timber ceilings
IS 6061 : Part I : 1971 Code of Practice for Construction of Floor and Roof with Joists and Filler Blocks - Part
1 : With Hollow Concrete Filler Blocks
IS 6061 : Part 2 : 1981 Code of practice for construction of floor and roof with joists and filler blocks: Part 2
With hollow clay filler blocks
IS 6061 : Part III : 1981 Code of Practice for Construction of Floor and Roof with Joists and Filler Blocks - Part
III : With Precast Hollow Clay Block Joists and Hollow Clay Filler Bl
IS 6061 : Part IV : 1981 Code of Practice for Construction of Floor and Roof with Joists and Filler Blocks - Part
IV : With Precast Hollow Clay Block Slab Panels
IS 6313 : Part 1 : 1981 Code of practice for anti-termite measures in buildings: Part 1 Constructional measures
IS 6313 : Part 2 : 2001 Code of Practice for Anti-Termite Measures in Buildings - Part 2 : Pre-constructional
Chemical Treatment Measaures
IS 6313 : Part 3 : 2001 Code of Practice for Anti-termite Measures in Buildings - Part 3 Treatment for Existing
Buildings
IS 6332 : 1984 Code of practice for construction of floor and roofs using doubly-curved shell units
IS 6509 : 1985 Code of practice for installation of joints in concrete pavements
IS 7683 : 1975 Code of practice for design, fabrication and maintenance of nail timber posts from small
dimensional timber for overhead distribution lines for low voltage
IS 9472 : 1980 Code of practice for laying mosaic parquet flooring
IS 10388 : 1982 Specification for corrugated coir wood wool cement roofing sheets
IS 10439 : 1983 Code of practice for patent glazing
IS 10440 : 1983 Code of practice for construction of reinforced brick and r.b.c. floors and roofs
IS 10566 : 1983 Methods of test for preformed fillers for expansion joints in paving and structural construction
IS 10957 : 1999 /ISO 2444 : 1988 Joints in Buildings - Vocabulary
IS 10958 : 1984/ISO 3447 : 1975 General check list of functions of joints in building (ISO 3447-1975)
IS 10959 : 1984/ISO 6927 : 1981 Glossary of terms for sealants for building purposes (ISO 6927-1981)
IS 11096 : 1984 Code of practice for design and construction of bolt-jointed construction
IS 11134 : 1984 Code of practice for setting out of buildings
IS 11433 : Part 1 : 1985 Specification for one part grade polysulphide base joints sealant Part 1 General
requirements
IS 11433 : Part 2 : 1986 Specification for one part grade polysulphide based joint sealant:Part 2 Methods of
test
IS 11817 : 1986/ISO 7727 : 1984 Classification of joints in buildings for accommodation of dimensional
deviations during construction (ISO 7727-1984)
IS 11818 : 1986/ISO 6589 : 1983 Method of test for laboratory determination of air permeability of joints in
buildings (ISO 6589-1983)
IS 12093 : 1987 Code of practice for laying and fixing of sloped roof coverings using plain and corrugated
galvanized steel sheets
IS 12118 : Part 1 : 1987 Specification for two parts polysulphide based sealants: Part 1 General requirements
IS 12118 : Part 2 : 1987 Specification for two parts polysulphide based sealants: Part 2 Methods of test
IS 12506 : 1988 Code of Practice for Improved Thatching of Roof with Rot and Fire Retardant Treatment
IS 12727 : 1989 Code of practice for no fines cast in situ cement concrete
IS 13077 : 1991 Guide for preparation and use of mud mortar in masonary

21
IS 15183 : Part 1 : 2002 Guidelines for Maintenance Management of Buildings - Part 1 : General
IS 15183 : Part 2 : 2002 Guidelines for Maintenance Management of Buildings - Part 2 : Finance
IS 15183 : Part 3 : 2002 Guidelines for Maintenance Management of Buildings - Part 3 : Labour
IS 15345 : 2003 Installation of Frameless Door and Window Shutters - Code of Practice

CED-15 BUILDER’S HARDWARE Number of Standards -- 52

Standard Description
IS 204 : Part 1 : 1991 Specificaion for tower bolts: Part 1 Ferrous metals
IS 204 : Part 2 : 1992 Specification for tower bolts: Part 2 Non-ferrous metals
IS 205 : 1992 Specification for non-ferrous metal butt hinges
IS 206 : 1992 Specification for tee and strap hinges
IS 208 : 1996 Specification for door handles
IS 281 : 1991 Mild Steel Sliding Door Bolts for Use with Padlocks - Specification
IS 362 : 1991 Specification for parliament hinges
IS 363 : 1993 Hasps and Staples - Specification
IS 364 : 1993 Specification for fanlight catch
IS 452 : 1973 Specification for door springs, rat-tail type
IS 453 : 1993 Specification for double acting spring hinges
IS 729 : 1979 Specification for drawer locks, cupboard locks and box locks
IS 1019 : 1974 Specification for rim latches
IS 1341 : 1992 Specification for steel butt hinges
IS 1495 : 1970 Specification for mild steel dust-bins
IS 1823 : 1980 Specification for floor door stoppers
IS 1837 : 1966 Specification for fanlight pivots
IS 2209 : 1976 Specification for mortice locks (vertical type)
IS 2681 : 1993 Specification for non-ferrous metal sliding door bolts (aldrops) for with padlocks
IS 3564 : 1996 Hydraulically Regulated Door Closers - Specification
IS 3818 : 1992 Specification for continuous (Piano) hinges
IS 3828 : 1966 Specification for ventilator chains
IS 3843 : 1995 Specification for steel back flap hinges
IS 3847 : 1992 Specification for mortice night latches
IS 4621 : 1975 Specification for indicating bolts for use in public baths and Lavatories
IS 4948 : 2002 Welded Steel Wire Fabric for General use - Specification
IS 4992 : 1975 Specification for door handles for mortice lock (vertical type)
IS 5187 : 1972 Specification for flush bolts
IS 5899 : 1970 Specification for Bath-room Latches
IS 5930 : 1970 Specification for mortice latch (vertical type)
IS 6315 : 1992 Specification for floor springs (hydraulically regulated) for heavy doors
IS 6318 : 1971 Specification for plastic window stays and fasteners
IS 6343 : 1982 Specification for Door Closers (Pneumatically Regulated) for Light Doors Weighing up to 40 kg
IS 6607 : 1972 Specification for rebated mortice locks (vertical type)
IS 7196 : 1974 Specification for hold fast
IS 7197 : 1974 Specification for double action floor springs (without oil check) heavy door

22
IS 7534 : 1985 Specification for sliding locking bolts for use with padlocks
IS 7540 : 1974 Specification for mortice dead locks
IS 7881 : Part 1 : 1975 Glossary of terms relating to builder's hardware: Part 1 Locks
IS 7881 : Part 2 : 1976 Glossary of terms relating to builder's hardware: Part 2 Latches
IS 8756 : 1978 Specification for mortice ball catches for use in wooden almirah
IS 8760 : 1978 Specification for mortice sliding door locks, with lever mechanism
IS 9106 : 1979 Specification for rising butt hinges
IS 9131 : 1979 Specification for rim lockes
IS 9460 : 1980 Specification for Flush Drop Handle for Drawers
IS 9899 : 1981 Specification for hat, coat and wardrobe hooks
IS 10019 : 1981 Specification for mild steel stays and fasteners
IS 10090 : 1982 Specification for numericals
IS 10342 : 1982 Specification for curtain rail system
IS 12817 : 1997 Specification for stainless steel butt hinges
IS 12867 : 1989 Pvc Handrail Covers - Specification
IS 14912 : 2001 Door Closers, Concealed Type (Hydraulically Regulated) - Specification

CED-20 WOOD PRODUCTS Number of Standards -- 53

Standard Description
IS 303 : 1989 Specification for plywood for general purposes
IS 652 : 1960 Specification for wooden separators for lead-acid storage batteries
IS 709 : 1974 Specification for medium strength aircraft plywood
IS 710 : 1976 Specification for Marine Plywood
IS 848 : 1974 Specification for Synthetic Resin Adhesives for Plywood (Phenolic and Aminoplastic)
IS 849 : 1994 Specification for cold setting case in glue for wood
IS 850 : 1994 Specification for natural sour (lactic) casein for glue manufacture
IS 851 : 1978 Specification for synthetic resin adhesives for construction work (non-structural) in wood
IS 852 : 1994 Specification for animal glue for general wood-working purposes
IS 1328 : 1996 Veneered Decorative Plywood - Specification
IS 1508 : 1972 Specification for Extenders for Use in Synthetic Resin Adhesives (Urea-formaldehyde) for
Plywood
IS 1658 : 1977 Specification for fibre hardboards
IS 1659 : 1990 Specification for block boards
IS 1734 : Parts 1 to 20 : 1983 Methods of Test for Plywood
IS 2380 : Parts I to XXI : 1977 Methods of Test for Wood Particle Boards and Boards from Other
Lignocellulosic Materials
IS 2380 : Part 22 : 1981 Method of test for wood particle boards and boards from other lignocellulosic
materials: Part 22 Determination of surface glueability test
IS 2380 : Part 23 : 1981 Method of test for wood particle boards and boards from other lignocellulosic
materials: Part 23 Vibration tests for particle boards
IS 3087 : 1985 Specification for wood particle boards (medium density) for general purposes
IS 3097 : 1980 Specification for Veneered Particle Boards

23
IS 3129 : 1985 Specification for low density particle boards
IS 3308 : 1981 Specification for wood wool building slabs
IS 3348 : 1965 Specification for fibre insulation boards
IS 3478 : 1966 Specification for High Density Wood Particle Boards
IS 3513 : Part 1 : 1989 Specification for resin treated compressed wood laminates (compregs) Part 1 For
electrical purposes
IS 3513 : Part 2 : 1989 Specification for resin treated compressed wood laminates (compregs):Part 2 For
chemical purposes
IS 3513 : Part 3 : 1989 Specification for Resin Treated Compressed Wood Laminates (Compregs) - Part 3 : For
General Purposes
IS 3513 : Part 4 : 1966 Specification for high and medium density wood lainates (compreg): Part 4 Sampling
and tests
IS 4834 : 1968 Specification for veneered wood boards for packing cases
IS 4835 : 1979 Specification for Polyvinyl Acetate Dispersion Based Adhesives for Wood
IS 4859 : 1968 Specification for high strength aircraft plywood
IS 4990 : 1993 Specification for plywood for concrete shuttering work
IS 5509 : 2000 Fire Retardant Plywood - Specification
IS 5539 : 1969 Specification for preservative treated plywood
IS 7316 : 1974 Specification for decorative plywood using plurality of veneers for decorative faces
IS 7638 : 1999 Wood/Lignocellulosic Based Panel Products - Methods of Sampling
IS 9188 : 1979 Performance requirements for adhesive for structural laminated wood products foruse under
exterior exposure condition
IS 9307 : Parts I to VIII : 1979 Methods of Test for Wood-based Structural Sandwich Construction
IS 10701 : 1983 Specification for structural plywood
IS 12049 : 1987 Dimensions and tolerances relating to wood based panel materials
IS 12053 : 1987 Code of practice for the preparation and application of putty for repairing plywood and other
wood based panels
IS 12077 : 1987 Code of practice for testing of timbers for plywood manufacture
IS 12120 : 1987 Code of practice for preservation of plywood and other panel products
IS 12406 : 2003 Medium Density Fibre Boards for General Purpose - Specification
IS 12823 : 1990 Wood Products - Prelaminated Particle Boards - Specification
IS 13745 : 1993 Method for determination of formaldehyde content in particle board by extraction method
called perforator method
IS 13957 : 1994 Specification for metal faced plywood
IS 13958 : 1994 Specification for bamboo mat board for general purposes
IS 14276 : 1995 Specification for cement bonded particle boards
IS 14315 : 1995 Specification for commercial veneers
IS 14587 : 1998 Specification for prelaminated medium density fibre board
IS 14588 : 1999 Specification for bamboo mat veneer composite for general purposes
IS 14616 : 1999 Specification for laminated veneer lumber
IS 14842 : 2000 Coir Veneer Board for General Purposes - Specification

CED-22 FIRE FIGHTING Number of Standards -- 120

Standard Description
IS 884 : 1985 Specification for first-aid hose reel for fire fighting

24
IS 901 : 1988 Specification for couplings, double male and double female, instantaneous pattern for fire
fighting
IS 902 : 1992 Specification for suction hose couplings for fire fighting purposes
IS 903 : 1993 Specification for fire hose delivery couplings, branch pipe, nozzles and nozzle spanner
IS 904 : 1983 Specification for 2-way and 3-way suction collecting heads for fire fighting purposes
IS 905 : 1980 Specification for delivery breechings, dividing and collecting instantaneous pattern for fire
fighting purposes
IS 906 : 1988 Specification for revolving branch pipe for fire fighting
IS 907 : 1984 Specification for suction strainers, cylindrical type for fire fighting purposes
IS 908 : 1975 Specification for Fire Hydrant, Stand Post Type
IS 909 : 1992 Specification for underground fire hydrant, sluice valve type
IS 910 : 1980 Specification for combined key for hydrant, hydrant cover and lower valve
IS 926 : 1985 Specification for Fireman's Axe
IS 927 : 1981 Specification for Fire Hooks
IS 928 : 1984 Specification for Fire Bells
IS 937 : 1981 Specification for washers for water fittings for fire fighting purposes
IS 939 : 1977 Specification for Snatch Block for Use with Fibre Rope for Fire Brigade Use
IS 940 : 2003 Portable Fire Extinguisher, Water Type (Gas Cartridge) - Specification
IS 941 : 1985 Specification for Blower and Exhauster for Fire Fighting
IS 942 : 1982 Functional Requirements for 275 1/Min Portable Pump Set for Fire Fighting
IS 943 : 1979 Functional requirements for 680-1/min trailer pump for fire brigade use
IS 944 : 1979 Functional requirements for 1800-1/min trailer pump for fire brigade use
IS 947 : 1985 Functional Requirements for Towing Tender for Trailer Fire Pump for Fire Brigade Use
IS 948 : 1983 Functional Requirements for Water Tender Type `A' for Fire Brigade Use
IS 949 : 1985 Functional Requirements for Emergency (Rescue) Tender for Fire Brigade Use
IS 950 : 1980 Functional Requirements for Water Tender, Type B for Fire Brigade Use
IS 951 : 2003 Functional Requirements for Crash Fire Tender for Air Fields
IS 952 : 1986 Specification for Fognozzle for Fire Brigade Use
IS 955 : 1980 Functional Requirements for Dry Powder Tender for Fire Brigade Use
IS 956 : 1975 Functional requirements for rescue tender for air fields
IS 957 : 1967 Specification for Control Van for Fire Brigade Use
IS 1941 : Part 1 : 1976 Functional requirements for electric motor sirens: Part 1 ac 3 phase 50 hz, 415 volts
type
IS 2097 : 1983 Specification for foam making branch pipe
IS 2171 : 1999 Specification for portable fire extinguishers,dry powder (cartridge type)
IS 2175 : 1988 Specification for heat sensitive fire detectors for use in automatic fire alarm system
IS 2189 : 1999 - Selection, Installation and Maintenance of Automatic Fire Detection and Alarm System - Code
of Practice
IS 2190 : 1992 Selection, Installation and Maintenance of First-aid Fire Extinguishers - Code of Practice
IS 2298 : 1977 Specification for single-barrel stirrup pump for fire fighting purposes
IS 2546 : 1974 Specification for galvanized mild steel fire bucket
IS 2696 : 1974 Functional Requirements for 1 125-1/min Light Fire Engine
IS 2745 : 1983 Specification for Non-Metal Helmet for Firemen and Civil Defence Personnel
IS 2871 : 1983 Specification for branch pipe, universal for fire fighting purposes
IS 2878 : 1986 Specification for Fire Extinguisher, Carbon Dioxide Type (Portable and Trolley Mounted)

25
IS 2925 : 1984 Specification for Industrial Safety Helmets
IS 2930 : 1980 Functional requirements for hose laying tender for fire brigade use
IS 3582 : 1984 Specification for basket strainers for fire fighting purposes (cylindrical type)
IS 3744 : 1985 Specification for hose binding machine
IS 3844 : 1989 Code of practice for installation and maintenance of internal fire hydrants and hose reels on
premises
IS 4151 : 1993 Specification for protective helmets for scooter and motorcycle riders
IS 4308 : 2003 Dry Chemical Powder for Fighting B and C Class Fires - Specification
IS 4571 : 1977 Specification for Aluminium Extension Ladders for Fire Brigade use
IS 4643 : 1984 Specification for suction wrenches for fire brigade use
IS 4861 : 1984 Specification for dry powder for fighting fires in burning metals
IS 4862 : Part 1 : 1986 Specification for portable fire extinguishers for aircraft : Part 1 Halon 1211 Type
IS 4927 : 1992 Unlined Flax Canvas Hose for Fire Fighting - Specification
IS 4928 : 1986 Specification for delivery valve for centrifugal fire pump outlets
IS 4947 : 1985 Specification for gas cartridges for use in fire extinguishers
IS 4989 : Part 1 : 1985 Specification for foam concentrate (compound) for producing mechanical foam for fire
fighting:Part I Protein foam
IS 4989 : Part 2 : 1984 Specification for Foam Concentrate for Producing Mechanical Foam for Fire Fighting -
Part 2 : Aqueous Film Forming Foam (AFFF)
IS 4989 : Part 3 : 1987 Specification for foam concentrate (compound) for producing foam for fire fighting: Part
3 Fluoro protein foam
IS 5131 : 2002 Dividing Breeching with Control for Fire Brigade Use - Specification
IS 5290 : 1993 Specification for landing valves
IS 5486 : 1985 Specification for quick release knife
IS 5505 : 1985 Specification for multi-edged rescue axe (non-wedging)
IS 5612 : Part 1 : 1977 Specification for hose-clamps and hose-bandages for fire brigade use: Part 1 Hose-
clamps
IS 5612 : Part 2 : 1977 Specification for hose-clamps and hose bandages for fire brigade use: Part 2 Hose
bandages
IS 5714 : 1981 Specification for Hydrant Stand-Pipe for Fire Fighting
IS 5888 : 1970 Code of practice for design and construction of fire service drill-tower
IS 5896 : Part I : 1970 Code of Practice for Selection, Operation and Maintenanace of Special Fire Fighting
Appliance - Part I : Combined Foam and Co Crash Tender
IS 5896 : Part 3 : 1975 Code of practice for selection, operation and maintenance of special fire fighting
appliances: Part 3 Turntable ladders
IS 6026 : 1985 Specification for hand operated sirens
IS 6067 : 1983 Functional Requirements for Water Tender Type `X' for Fire Brigade Use
IS 6070 : 1983 Code of practice for selection, operation and maintenance of trailer fire pumps, portable
pumps, water tenders and motor fire engines
IS 6234 : 2003 Portable Fire Extinguishers Water Type (Stored Pressure) - Specification
IS 6382 : 1984 Code of Practice for Design and Installation of Fixed Carbon Dioxide Fire Extinguishing System
IS 7673 : 1975 Glossary of terms for fire fighting equipment
IS 7692 : 1993 Specification for wooden headforms for testing of helmets
IS 8090 : 1976 Specification for Couplings, Branch Pipe, Nozzle Used in Hose Reel Tubing for Fire Fighting
IS 8096 : 1992 Specification for fire beaters
IS 8149 : 1994 Functional requirements for twin co2 fire extinguishers (trolley mounted)

26
IS 8423 : 1994 Specification for controlled percolating hose for fire fighting
IS 8442 : 1977 Functional requirements for stand post type water monitor for fire fighting
IS 9562 : 1980 Specification for non-metal helmet for police force
IS 9668 : 1990 Code of practice for provision and maintenance of water supplies and fire fighting
IS 9695 : 1980 Methods of sampling of helmets
IS 9972 : 2002 Specification for Automatic Sprinkler Heads for Fire Protection Service
IS 9973 : 1981 Specification for visor for scooter helmets
IS 9995 : 1981 Specification for visor for non-metal police and firemen's helmets
IS 10204 : 2001 Specification for Portable Fire Extinguisher, Mechanical Foam Type
IS 10460 : 1983 Functional requirements for small foam tender for fire brigade use
IS 10658 : 1999 - Specification for Higher Capacity Dry Powder Fire Extinguisher (Trolley Mounted)
IS 10993 : 1984 Functional requirements for 2000 kg dry powder tender for fire brigade use
IS 11070 : 1984 Specification for bromochlorodifluoromethane (halon-1211) for fire fighting
IS 11101 : 1984 Specification for Extended Branch Pipe for Fire Brigade Use
IS 11108 : 1984 Specification for Portable Fire Extinguishers - Halon 1211 Type
IS 11360 : 1985 Specification for smoke detectors for use in automatic electrical fire alarm system
IS 11833 : 1986 Specification for dry powder fire extinguisher for metal fires
IS 12717 : 1989 Functional requirements of fire fighting equipment - High capacity portable pumpset (1100-
1600 1/min)
IS 12796 : 1989 Specification for fire rake
IS 12805 : 1989 Tool Mcleod for fighting forest fires
IS 12835 : Part 1 : 1989 Code of practice for design and installation of fixed fire extinguishing system Part 1
Low expansion foam
IS 12853 : 1989 Specification for pulaski tool for forest fire
IS 12859 : 1989 Fire Fighting - Brush Hook for Forest Fires - Specification
IS 12861 : 1989 Specification for double bit axe for forest fire
IS 12862 : 1989 Specification for fire fighting shovel for forest fires
IS 13039 : 1991 Code of practice for provision and maintenance of external hydrant system
IS 13385 : 1992 Specification for fire extinguisher 50 capacity wheel mounted water type (Gas Cartridge)
IS 13386 : 1992 Specification for 50 l capacity fire extinguisher, mechanical foam type
IS 13849 : 1993 Specification for portable fire extinguisher dry powder type (constant pressure)
IS 14609 : 1999 Dry Chemical Powder for Fighting A,B,C, Class Fires - Specification
IS 14851 : 2000 Maintenance of Fire Hose - Code of Practice
IS 14933 : 2001 High Pressure Fire Fighting Hose - Specification
IS 14951 : 2001 Fire Extinguisher - 135 Litres Capacity Mechanical Foam Type - Specification
IS 15051 : 2001 High Pressure Fire Hose Delivery Couplings - Specification
IS 15105 : 2002 Design and Installation of Fixed Automatic Sprinkler Fire Extinguishing Systems - Code of
Practice
IS 15220 : 2002 Halogenated Hydrocarbons - Halon 1211 And Halon 1301 - Fire Extinguishing Media -
Specification
IS 15221 : 2002 Safe Handling and Transfer Procedures of Halon 1211 and Halon 1301 (Halogenated
Hydrocarbons) - Fire Extinguishing Media - Code of Practice
IS 15222 : 2002 Carbon Dioxide as Fire Extinguishing Media for Fire Protection - Specification
IS 15301 : 2003 Installation and Maintenance of Fire Fighting Pumps - Code of Practice
IS 15325 : 2003 Design and Installation of Fixed Automatic High and Medium Velocity Water Spray System -
Code of Practice

27
IS 15397 : 2003 Portable Fire Extinguisher Mechanical Foam Type (Stored Pressure) - Specification

CED-24 WATER SUPPLY AND SANITATION Number of Standards -- 61

Standard Description
SP 35 : 1987 Handbook on Water Supply and Drainage (with Special Emphasis on Plumbing)
IS 1172 : 1993 Code of Basic Requirements for Water Supply, Drainage and Sanitation
IS 1742 : 1983 Code of practice for building drainage
IS 2064 : 1993 Code of practice for selection, installation and maintenance of sanitary appliances
IS 2065 : 1983 Code of practice for water supply in buildings
IS 2470 : Part 1 : 1985 Code of practice for installation of septic tanks: Part I design, criteria and construction
IS 2470 : Part 2 : 1985 Code of practice for installation of septic tanks: Part II Secondary treatment and
disposal of septic tank effluent
IS 3114 : 1994 Code of practice for laying of cast iron pipes
IS 4111 : Part 1 : 1986 Code of practice for ancillary structures in sewerage system: Part I Manholes
IS 4111 : Part 2 : 1985 Code of practice for ancillary structures in sewerage system: Part II Flusing tanks
IS 4111 : Part 3 : 1985 Code of practice for ancillary structures in sewerage system: Part III Inverted syphon
IS 4111 : Part IV : 1968 Code of Practice for Ancillary Structures in Sewerage System - Part IV : Pumping
Stations and Pumping Mains (Rising mains)
IS 4111 : Part 5 : 1993 Code of practice for ancillary structures in sewerage system: Part 5 Tidal outfalls
IS 4127 : 1983 Code of practice for laying of glazed stoneware pipes
IS 5329 : 1983 Code of practice for sanitary pipe work above ground for buildings
IS 5611 : 1987 Code of Practice for Construction of Waste Stabilization Ponds (Faculative Type)
IS 5822 : 1994 Code of Practice for Laying of Electrically Welded Steel Pipes for Water Supply
IS 6279 : 1971 Specification for equipment for grit removal devices
IS 6280 : 1971 Specification for sewage screens
IS 6295 : 1986 Code of practice for water supply and drainage in high altitudes and/or sub-zero temperature
regions
IS 6924 : 1973 Code of Practice for the Construction of Refuse Chutes in Multistoreyed Buildings
IS 7090 : 1985 Guidelines for rapid mixing devices
IS 7208 : 1992 Guidelines for flocculator devices
IS 7232 : 1974 Method for imhoff cone test
IS 7558 : 1974 Code of practice for_domestic hot water installations
IS 7740 : 1985 Code of practice for construction and maintenance of road gullies
IS 8413 : Part 1 : 1977 Requirements for biological treatment equipment: Part 1 Trickling filters
IS 8413 : Part 2 : 1982 Requirements for biological treatment end equipment: Part 2 Activated sludge procss
and its modifications
IS 8419 : Part 1 : 1977 Requirements for filtration equipment : Part 1 Filtration media - sand and gravel
IS 8419 : Part 2 : 1984 Requirements for rapid sand gravity filtration equipment: Part 2 Under drainage
system
IS 9110 : 1979 Specification for Hand Operated Augers for Cleaning Water-closets, Pipes and Sewers
IS 9222 : Part 1 : 1990 Recommendation for handling and dosing devices for chemicals for water treatment:
Part I Coagulants
IS 10037 : Part 1 : 1981 Requirements for sludge dewatering equipment: Part I Sludge drying beds-sand,
gravel and underdrains

28
IS 10037 : Part 2 : 1983 Requirements for sludge de-watering equipment: Part 2 Vacuum filtration equipment
IS 10037 : Part 3 : 1983 Requirements for sludge de-watering equipment: Part 3 Centrifugal equipment (Solid
bowl type)
IS 10053 : 1981 Requirements for equipment for jackson candle turbiditimeter and determination of turbidity
IS 10261 : 1982 Requirements for settling tank (clarifier equipment) for waste water treatment
IS 10313 : 1982 Requirements for settling tank (clarifier equipment) for water treatment plant
IS 10446 : 1983 Glossary of terms relating to water supply and sanitation
IS 10552 : 1983 Specification for buckets to be used in power driven bucket type sewer cleaning machine
IS 10553 : Part 1 : 1983 Requirements for chlorination equipment: Part I General guidelines for chlorination
plants including handling, storage and safety of chlorine cylinders and drums
IS 10553 : Part 2 : 1983 Requirements for chlorination equipment: Part 2 Vacuum feed type chlorinators
IS 10553 : Part 4 : 1983 Requirements for chlorination equipment: Part 4 Gravity feed type gaseous
chlorinators
IS 10553 : Part 5 : 1987 Requirements of chlorination equipment: Part 5 Bleaching powder solution feeder
displacement type chlorinator
IS 10595 : 1983 Requirements for power driven bucket-type sewer cleaning machine
IS 11117 : 1984 Requirements for power driven rodding machine for sewers
IS 11208 : 1985 Guidelines for registration of plumbers
IS 11387 : 1985 Requirements for high pressure jetting machine for sewer cleaning
IS 11397 : 1985 Specification for attachment tools for power driven rodding machine for sewers
IS 11401 : Part 1 : 1985 Requirements for slow sand filters: Part 1 General guidelines
IS 11401 : Part 2 : 1990 General requirements for slow sand filters Part 2 Design, construction, operation and
maintenance
IS 11906 : 1986 Recommendations for cement mortar lining for cast iron mild steel and ductile-iron pipes and
fittings for transportation of water
IS 11925 : 1986 Specification for pitch-impregnated fibre pipes and fittings for drainage purposes
IS 11931 : 1987 Specification for sewer cleaning metal rods
IS 11972 : 1987 Code of practice for safety precautions to be taken when entering a sewerage system
IS 12183 : Part 1 : 1987 Code of practice for plumbing in multi-storeyed buildings: Part 1 Water supply
IS 12251 : 1987 Code of practice for drainage of building basements
IS 12288 : 1987 Code of Practice for Use and Laying of Ductile Iron Pipes
IS 12314 : 1987 Code of practice for sanitation with leaching pits for rural community
IS 13166 : 1992 Guidelines for evaluation and testing of mechanical surface aerators
IS 13496 : 1992 General requirements of suction machine for cleaning sewers, manholes and ancillary
structures provided on sewer line and closed storm water drains

CED-29 CONSTRUCTION MANAGEMENT Number of Standards -- 26

Standard Description
IS 3696 : Part 1 : 1987 Safety code of scaffolds and ladders: Part 1 Scaffolds
IS 3696 : Part 2 : 1991 Scaffolds and Ladders - Code of Safety - Part 2 : Ladders
IS 3764 : 1992 Code of safety for excavation work
IS 4014 : Part II : 1967 Code of Practice for Steel Tubular Scaffolding - Part II : Safety Regulations for
Scaffolding
IS 4081 : 1986 Safety code for blasting and related drilling operations

29
IS 4082 : 1996 Recommendations on stacking and storage of construction materials and components at site
IS 4130 : 1991 Safety code for demolition of buildings
IS 4138 : 1977 Safety code for working in compressed air
IS 4756 : 1978 Safety code for tunneling work
IS 4912 : 1978 Safety Requirements for Floor and Wall Openings, Railings and Toe Boards
IS 5121 : 1969 Safety code for piling and other deep foundations
IS 5916 : 1970 Safety code for construction involving use of hot bituminous materials
IS 7272 : Part I : 1974 Recommendation for Labour Output Constants for Building Work - Part I : North Zone
IS 7293 : 1974 Safety code for working with connstruction machinery
IS 7969 : 1975 Safety code for handling and storage of building materials
IS 8989 : 1978 Safety code for erection of concrete framed structures
IS 10067 : 1982 Material constants in building works
IS 10291 : 1982 Safety code for dress divers in civil engineering works
IS 10302 : 1982 Unified Nomenclature of Workmen for Civil Engineering
IS 13415 : 1992 Protective Barriers in and Around Buildings - Code of Safety
IS 13416 : Part 1 : 1992 Recommendations for preventive measures against hazards at workplaces Part 1
Falling material hazards prevention
IS 13416 : Part 2 : 1992 Recommendations for preventive measures against hazards at workplaces Part 2
Fall prevention
IS 13416 : Part 3 : 1994 Recommendations for preventive measures against hazards at workplaces Part 3
Disposal of debris
IS 13416 : Part 4 : 1994 Recommendations for preventive measures against hazards at workplaces Part 4
Timber structure
IS 13416 : Part 5 : 1994 Recommendations for preventive measures against hazards at workplaces Part 5
Fire protection
IS 13430 : 1992 Code of practice for safety during additional construction and alteration to existing buildings

CED-30 CLAY PRODUCT FOR BUILDINGS Number of Standards -- 28

Standard Description
IS 654 : 1992 Specification for clay roofing tiles, mangalore pattern
IS 1077 : 1992 Common Burnt Clay Building Bricks - Specification
IS 1464 : 1992 Specification for clay ridge and ceiling tiles
IS 1478 : 1992 Specification for clay flooring tile
IS 2117 : 1991 Guide for Manufacture of Hand-Made Common Burnt-Clay Building Bricks
IS 2180 : 1988 Specification for heavy duty burnt clay building bricks
IS 2222 : 1991 Specification for Burnt Clay Perforated Building Bricks
IS 2248 : 1992 Glossary of terms relating to clay products for building
IS 2690 : Part 1 : 1993 Specification for burnt clay flat terracing tiles: Part 1 Machine made
IS 2690 : Part 2 : 1992 Specification for burnt clay flat terracing tiles: Part 2 Hand made
IS 2691 : 1988 Specification for burnt clay facing bricks
IS 3367 : 1993 Specification for burnt clay tiles for use in lining irrigation and drainage works
IS 3495 : Part 1 to 4 : 1992 Methods of Tests of Burnt Clay Building Bricks - Part 1 : Determination of
Compressive Strength - Part 2 : Determination of Water Absorption - Part 3 : Determination of Efflorescence -
Part 4 : Determination of Warpage
IS 3583 : 1988 Specification for burnt clay paving bricks

30
IS 3951 : Part 1 : 1975 Specification for hollow clay tiles for floors and roofs Part 1 Filler type
IS 3951 : Part 2 : 1975 Specification for hollow clay tiles for floors and roofs Part 2 Structural type
IS 3952 : 1988 Specification for burnt clay hollow bricks for walls and partitions
IS 3978 : 1993 Code of practice for manufacture of burnt clay Mangalore pattern roofing tiles
IS 4805 : 1978 Guide for Construction of Brick Kiln
IS 4885 : 1988 Specification for sewer bricks
IS 5454 : 1978 Methods of sampling of clay building bricks
IS 5779 : 1986 Specification for burnt clay soling bricks
IS 6165 : 1992 Dimensions for special shapes of clay bricks
IS 7556 : 1988 Specification for burnt clay jallies
IS 8920 : 1978 Methods for sampling of burnt clay tiles
IS 11650 : 1991 Guide for manufacture of common burnt clay building bricks by semi-mechanized process
IS 13317 : 1992 Clay Roofing Country Tiles, Half Round and Flat Tiles - Specification
IS 13757 : 1993 Specification for burnt clay fly ash building bricks

CED-32 PREFABRICATION Number of Standards -- 14

Standard Description
IS 3201 : 1988 Criteria for design and construction of precast-trusses and purlins
IS 6072 : 1971 Specification for autoclaved reinforced cellular concrete wall slabs
IS 6073 : 1971 Specification for autoclaved reinforced cellular concrete floor and roof slabs
IS 10297 : 1982 Code of practice for design and construction of floors and roofs using precast
reinforced/prestressed concrete ribbed or cored slab unit
IS 10505 : 1983 Code of practice for construction of floors and roofs using precast concrete waffle units
IS 11447 : 1985 Code of practice for construction with large panel prefabricates
IS 13990 : 1994 Specification for precast reinforced concrete planks and joist for flooring and roofing
IS 13994 : 1994 Design and Construction of Floor and Roof with Precast Reinforced Concrete Planks and
Joists - Code of Practice
IS 14142 : 1994 Code of practice for design and construction of floors and roofs with prefabricated brick panel
IS 14143 : 1994 Specification for prefabricated brick panel and partially precast concrete joist for flooring and
roofing
IS 14201 : 1994 Specification for precast reinforced concrete channel unit for construction of floors and roofs
IS 14215 : 1994 Design and Construction of Floors and Roofs with Precast Reinforced Concrete Channel
Units - Code of Practice
IS 14241 : 1995 Precast Reinforced Concrete L-panel for Roofing – Specification
IS 14242 : 1995 Code of practice for design and construction of roof with L-Panel units

CED-34 PAINTING VARNISHING AND ALLIED FINISHES Number of Standards -- 19

Standard Description
IS 1477 : Part I : 1971 Code of Practice for Painting of Ferrous Metals in Buildings - Part I : Pretreatment
IS 1477 : Part 2 : 1971 Code of practice for painting of ferrous metals in buildings: Part2 Painting
SP 1650 : 1973 Standard colours for building and decorative finishes (with supplement)
IS 2338 : Part 1 : 1967 Code of practice for finishing of wood and wood based materials: Part 1 Operations
and workmanship

31
IS 2338 : Part 2 : 1967 Code of practice for finishing of wood and wood based materials: Part 2 Schedules
IS 2395 : Part 1 : 1994 Painting of Concrete, Masonry and Plaster Surfaces - Code of Practice - Part 1 :
Operations and Workmanship
IS 2395 : Part 2 : 1994 Code of practice for painting concrete, masonry and plaster surfaces: Part 2 Schedule
IS 2524 : Part 1 : 1968 Code of practice for painting of nonferrous metals in buildings: Part 1 Pretreatment
IS 2524 : Part 2 : 1968 Code of practice for painting of non-ferrous metals in buildings: Part 2 Painting
IS 3140 : 1965 Code of practice for painting asbestos cement building products
IS 4597 : 1968 Code of practice for finishing of wood and wood based products with nitrocellulose and cold
catalysed materials
IS 5807 : Part 1 : 1975 Methods of test for clear finishes for wooden furniture: Part 1 Resistance to dry heat
IS 5807 : Part 2 : 1975 Methods of test for clear finishes for wooden furniture: Part 2 Resistance to wet heat
IS 5807 : Part 3 : 1971 Methods of test for clear finishes for wooden furniture: Part 3 Resistance to marking by
oils and fats
IS 5807 : Part 4 : 1975 Methods of test for clear finishes for wooden furniture: Part 4 Resistance to marking by
liquids
IS 5807 : Part 5 : 1975 Methods of test for clear finishes for wooden furniture: Part 5 Test for low angle glare
IS 5807 : Part VI : 1978 Methods of Test for Clear Finishes for Wooden Furniture - Part VI : Resistance to
Mechanical Damage
IS 9954 : 1981 Pictorial Surface Preparation Standards for Painting of Steel Surfaces
IS 14428 : 1997 Guidelines for painting of structures in aggressive chemical environment

CED-35 FURNITURE Number of Standards -- 59

Standard Description
IS 1829 : Part 1 : 1978 Specification for library furniture and fittings: Part 1 Timber
IS 1829 : Part 2 : 1993 Specification for library furniture and fittings: Part 2 Steel
IS 1883 : 1983 Specification for metal shelving racks adjustable type
IS 2695 : 1993 Specification for drawing filing equipment
IS 3312 : 1984 Specification for steel shelving cabinets (adjustable type)
IS 3313 : 1983 Specification for Steel Filing Cabinets for General Office Purposes
IS 3314 : 1984 Specification for steel clothes lockers
IS 3497 : 1992 Specification for steel wardrobes (adjustable type)
IS 3498 : 1993 Specification for metal table (office type)
IS 3499 : Part 1 : 1985 Specification for metal chairs for office purposes: Part I non-revolving and non-tilting
IS 3499 : Part 2 : 1985 Specification for metal chairs for office purposes: Part II Revolving and tilting
IS 3663 : 1991 Dimensions of tables and chairs for general office purposes
IS 3761 : 1983 Specification for Metal Side Racks (Adjustable Type)
IS 3762 : 1979 Specification for metal waste paper bins
IS 3763 : 1983 Specification for metal folding chairs
IS 3791 : 1983 Specification for Metal Paper Trays
IS 3845 : 1966 Code of practice for joints used in wooden furniture
IS 4103 : 1977 Specification for metal nesting chairs
IS 4116 : 1988 Specification for wooden shelving cabinets (adjustable type)
IS 4126 : 1986 Specification for Wooden Wardrobes (Adjustable and Non-adjustable Type)
IS 4204 : 1974 Functional Requirements for Drafting Chairs

32
IS 4205 : 1989 Specification for drafting stools
IS 4414 : 1990 Wooden Table Tops - Specification
IS 4415 : 1974 Glossary of terms relating to wooden furniture and fixtures
IS 4837 : 1990 School Furniture, Classroom Chairs and Tables - Recommendations
IS 4838 : 1990 Anthropometric dimensions for school children age group 5-17 years
IS 5391 : 1992 Specification for adjustable metal chairs for use of typists and operators in telephone
exchanges
IS 5416 : Part 1 : 1988 Method of test for strength and stability of chairs and stools Part 1 Strength
IS 5416 : Part 2 : 1988 Methods of Test for Strength and Stability of Chairs and Stools - Part 2 : Determination
of Stability of Chairs and Stools
IS 5533 : 1969 Recommendations for dimensions for spaces for human activities
IS 5823 : 1986 Specification for Dining Tables
IS 5923 : 1986 Specification for Wooden Clothes' Lockers
IS 5967 : Part 1 : 1988 Methods of Test for Strength and Stability of Tables and Trolleys - Part 1 : Strength
IS 5967 : Part 2 : 1988 Methods of test for strength and stability of tables and trolleys : Part 2 Stability
IS 5974 : 1986 Specification for divans and easy chairs
IS 6179 : 1971 Specification and safety requirements for rigid side playpens
IS 6184 : 1971 Dimensions for Furniture Mirrors
IS 6185 : 1971 Specification and Safety Requirements for High Chairs
IS 6188 : 1988 Specification for wooden bedside table
IS 6189 : 1985 Specification for metal stationary cupboards
IS 6632 : 1988 Specification for wooden folding chairs
IS 7070 : 1988 Wooden Shelving Racks, Adjustable and Non-Adjustable Type - Specification
IS 7076 : 1983 Specification for metal book ends
IS 7259 : Part 1 : 1988 Specification for wooden beds:Part 1 for use with mattresses
IS 7760 : 1985 Specification for steel glass-front cabinets
IS 7761 : 1983 Specification for steel book cases
IS 8126 : 1993 Composite office tables
IS 8467 : 1977 Specification for steel card-index cabinets
IS 8761 : 1978 Specification for steel folding cots
IS 9236 : 1993 Specification for metal letter-rests
IS 9715 : 1981 Specification for steel visible indexing system cabinets
IS 11525 : 1986 Specification for wooden chairs for office purposes
IS 11679 : 1986 Specification for Wooden Tables for Office Use
IS 12674 : Part 1 : 1989 Methods of test for strength and stability of settees and benches Part 1 Strength
IS 12674 : Part 2 : 1989 Methods of test for strength and stability of settees and benches Part 2 Stability
IS 12680 : 1989 Specification for wooden sofa-cum-bed
IS 13089 : 1991 Specification for furniture - storage units - determination of stability
IS 13713 : 1993 Specification for plastic chairs for general office purposes
IS 13896 : 1994 Specification for machine operators table and display unit (VDU) table

33
CED-36 FIRE SAFETY Number of Standards -- 38

34
 Standard Description
IS 1641 : 1988 Code of practice for fire safety of buildings (general): General principles of fire grading and
classification
IS 1642 : 1989 Code of practice for fire safety of buildings (general): Details of construction
IS 1643 : 1988 Code of practice for fire safety of buildings (general): Exposure hazard
IS 1644 : 1988 Code of practice for fire safety of buildings (general): Exit requirements and personal hazard
IS 1646 : 1997 Code of practice for fire safety of buildings (general): Electrical installations
IS 2726 : 1988 Code of practice for fire safety of industrial buildings: Cotton ginning and pressing (including
cotton seed delintering)factories
IS 3034 : 1993 Fire Safety of Industrial Buildings: Electrical Generating and Distributing Stations - Code of
Practice
IS 3058 : 1990 Code of practice for fire safety of industrial buildings: Viscose rayon yarn and/or staple fibre
plants
IS 3079 : 1990 Code of practice for fire safety of industrial buildings: Cotton textile mills
IS 3594 : 1991 Code of practice for fire safety of industrial buildings:General storage and warhousing
including cold storage
IS 3595 : 2002 Code of Practice for Fire Safety of Industrial Buildings : Coal Pulverizers and Associated
Equipments
IS 3614 : Part I : 1966 Specification for Fire-check Doors - Part I : Plate, Metal Covered and Rolling Type
IS 3614 : Part 2 : 1992 Specification for metallic and non-metallic fire check doors - Resistance test and
performance criteria
IS 3808 : 1979 Method of test for non-combustibility of building materials
IS 3809 : 1979 Fire resistance test for structures
IS 3836 : 2000 Fire Safety of Industrial Buildings - Jute Mills - Code of Practice
IS 4226 : 1988 Code of practice for fire safety of industrial building: Aluminium/Magnesium powder factories
IS 4886 : 1991 Code of practice for fire safety of industrial buildings: Tea factories
IS 6329 : 2000 Code of Practice for Fire Safety of Industrial Buildings - Saw Mills and Wood Works
IS 8757 : 1999 Glossary of Terms Associated with Fire Safety
IS 8758 : 1993 Recommendations for fire precautionary measures in the construction of temporary structures
and pandals
IS 9109 : 2000 Fire Safety of Industrial Buildings - Paint and Varnish Factories – Code of Practice
IS 11457 : Part 1 : 1985 Code of practice for fire safety of chemical industries: Part 1 Rubber and plastic
IS 11460 : 1985 Code of Practice for Fire Safety of Libraries and Archives
IS 12349 : 1988 Fire protection-safety signs
IS 12407 : 1988 Graphic symbols for fire protection plans
IS 12456 : 1988 Code of practice for fire protection of electronic data processing installation
IS 12458 : 1988 Method of test for fire resitance test of fire stops
IS 12459 : 1988 Code of Practice for Fire Safety in Cable Runs
IS 12777 : 1989 Method for Classification of Flame Spread of Products
IS 13045 : 1991 Code of Practice for Fire Safety of Industrial Buildings : Flour Mills
IS 13694 : 1993 Code of practice for fire safety in iron and steel industries
IS 13716 : 1993 Code of practice for fire safety of hotels
IS 14435 : 1997 Code of practice for fire safety in educational institutions
IS 14689 : 1999 Code of Practice for Fire Safety in Industrial Buildings (Printing and Publishing Industry)
IS 14850 : 2000 Fire Safety of Museums - Code of Practice
IS 15381 : 2003 Fire Blanket – Specification

35
IS 15394 : 2003 Fire Safety in Petroleum Refineries and Fertilizer Plants - Code of Practice

CED-37 STRUCTURAL SAFETY Number of Standards -- 5

Standard Description
IS 875 : Part 1 : 1987 Code of practice for design loads (other than earthquake)for buildings and structures
Part 1 Dead loads - Unit weights of building material and stored materials (Incorporating IS:1911-1967)
IS 875 : Part 2 : 1987 Code of practice for design loads (other than earthquake) for buildings and structurres:
Part 2 Imposed loads
IS 875 : Part 3 : 1987 Code of Practice for Design Loads (Other than Earthquake) for Buildings and Structures
- Part 3 : Wind Loads
IS 875 : Part 4 : 1987 Code of practice for design loads (other than earthquake) for buildings and structures
Part 4 Snow loads
IS 875 : Part 5 : 1987 Code of practice for design loads (other than earthquake) for buildings and structures
Part 5 Special loads and load combinations

CED-38 SPECIAL STRUCTURES Number of Standards -- 12

Standard Description
SP 43 (S and T) : 1987 Handbook on Structures with Reinforced Concrete Portal Frames (Without Cranes)
SP 64 (S & T) : 2001 Explanatory Handbook on Indian Standard Code of Practice for Design Loads (Other
than Earthquake) for Buildings and Structures
IS 2210 : 1988 Criteria for design of reinforced concrete shell structures and folded plates
IS 3935 : 1966 Code of practice for composite construction
IS 4090 : 1967 Criteria for design of reinforced concrete arches
IS 4995 : Part 1 : 1974 Criteria for design of reinforced concrete bins for storage of granular and powdery
materials: Part 1 General requirements and assessment of bin loads
IS 4995 : Part II : 1974 Criteria for Design of Reinforced Concrete Bins for Storage of Granular and Powdery
Materials - Part II : Design Criteria
IS 4998 : Part 1 : 1992 Criteria for design of reinforced concrete chimneys: Part 1 Assessment of loads
IS 11384 : 1985 Code of Practice for Composite Construction in Structural Steel and Concrete
IS 11504 : 1985 Criteria for structural design of reinforced concrete natural draught cooling towers
IS 11682 : 1985 Criteria for design of RCC staging for overhead water tanks
IS 12303 : 1987 Criteria for design of RCC hinges

CED-39 EARTH QUAKE ENGINEERING Number of Standards -- 11

Standard Description
SP 22 : 1982 Explanatory Handbook on Codes for Earthquake Engineering
IS 1893 : 1984 Criteria for earthquake resistant design of structures
IS 1893 : Part 1 : 2002 Criteria for Earthquake Resistant Design of Structures - Part 1 : General Provisions
and Buildings
IS 4326 : 1993 Code of practice for earthquake resistant design and construction of buildings
IS 4967 : 1968 Recommendations for seismic instrumentation for river valley projects
IS 4991 : 1968 Criteria for blast resistant design of structrues for explosions above ground

36
IS 6922 : 1973 Criteria for safety and design of structures subject to underground blasts
IS 13827 : 1993 Improving earthquake resistance of earthen buildings – Guidelines
IS 13828 : 1993 Improving earthquake resistance of low strength masonary buildings – Guidelines
IS 13920 : 1993 Ductile detailing of reinforced concrete structures subjected to seismic forces - Code of
practice
IS 13935 : 1993 Guidelines for repair and seismic strengthening of buildings

CED-41 WATER PROOFING AND DAMP PROOFING Number of Standards – 32

Standard Description
IS 1322 : 1993 Specification for bitumen felts for water proofing and damp-proofing
IS 1346 : 1991 Code of Practice for Waterproofing of Roofs with Bitumen Felts
IS 1580 : 1991 Specification for bituminous compound for water-proofing and caulking purposes
IS 1609 : 1991 Code of practice for laying damp-proofing treatment using bitumen felts
IS 3036 : 1992 Code of practice for laying lime concrete for a waterproofed roof finish
IS 3037 : 1986 Specification for bitumen mastic for use in water-proofing of roofs
IS 3067 : 1988 Code of practice for general design details and preparatory work for damp-proofing and water-
proofing of buildings
IS 3384 : 1986 Specification for bitumen primer for use in waterproofing and damp-proofing
IS 4365 : 1967 Code of practice for application of bitumen mastic for waterproofing of roofs
IS 4911 : 1986 Glossary of terms relating to bituminous waterproofing and damp-proofing of buildings
IS 5871 : 1987 Specification for bitumen mastic for tanking and damp-proofing_
IS 6494 : 1988 Code of practice for water-proofing of underground water reservoirs and swimming pools
IS 7193 : 1994 Specification for glass fibre base bitumen felts
IS 7198 : 1974 Code of practice for damp-proofing using bitumen mastic
IS 7290 : 1979 Recommendations for use of polyethylene film for water-proofing of roofs
IS 9918 : 1981 Code of practice for in-situ waterproofing and damp-proofing treatments with glass fibre tissue
reinforced bitumen
IS 12027 : 1987 Specification for silicone-based water repellents
IS 12054 : 1987 Code of practicie for application of silicon based water repellent
IS 13182 : 1991 Waterproofing and Damp-Proofing of Wet Areas in Building - Recommendations
IS 13435 : Part 1 : 1992 Acrylic based polymer waterproofinng material - Method of tests Part 1 Determination
of solid content
IS 13435 : Part 2 : 1992 Acrylic Based Polymer Waterproofing Materials - Methods of Test - Part 2 :
Determination of Coarse Particles
IS 13435 : Part 3 : 1992 Acrylic based polymer waterproofing material - Methods of test Part 3 Determination
of capillary water take-up
IS 13435 : Part 4 : 1992 Acrylic based polymer waterproofing material - Methods of test Part 4 Determination
of pH value
IS 13435 : Part 5 : 1992 Acrylic based waterproofing material - Methods of test Part 5 Determination of
minimum film forming temperature and white point
IS 13826 : Part 1 : 1993 Bitumen based felts - Method of test Part 1 Breaking strenth test
IS 13826 : Part 2 : 1993 Bitumen based felts - Methods of test Part 2 Pliability test
IS 13826 : Part 3 : 1993 Bitumen based felts - Methods of test Part 3 Storage sticking test
IS 13826 : Part 4 : 1993 Bitumen based felts - Method of test Part 4 Pressure head test
IS 13826 : Part 5 : 1994 Bitumen based felts - Methods of test Part 5 Heat resistance test
IS 13826 : Part 6 : 1993 Bitumen based felts - Methods of test Part 6 Water absorption test

37
IS 13826 : Part 7 : 1993 Bitumen based felts - Methods of test Part 7 Determination of binder content
IS 14695 : 1999 Glass Fibre Base Coal Tar Pitch Outerwrap - Specification

CED-43 FOUNDATION ENGINEERING Number of Books-124

SP 36 : Part 1 : 1987 Compendium of Indian standards on soil engineering: Part 1 Laboratory testing of soils
for civil engineering purposes
SP 36 : Part 2 : 1988 Compendium of Indian standards on soil engineering: Part 2 Field testing
IS 1080 : 1985 Code of practice for design and construction of shallow foundations in soils (other than raft,
ring and shell)
IS 1498 : 1970 Classification and identification of soils for general engineering purposes
IS 1725 : 1982 Specification for soil based blocks used in general building construction
IS 1888 : 1982 Method of Load Test on Soils
IS 1892 : 1979 Code of practice for subsurface investigations for foundations
IS 1904 : 1986 Code of practice for design and construction of foundations in soils: general requirements
IS 2131 : 1981 Method for Standard Penetration Test for Soils
IS 2132 : 1986 Code of practice for thin walled tube sampling of soils
IS 2720 : Part 1 : 1983 Methods of Test for Soils - Part 1 : Preparation of Dry Soil Samples for Various Tests
IS 2720 : Part 2 : 1973 Methods of test for soils: Part 2 Determination of water content
IS 2720 : Part 3 : Sec 1 : 1980 Methods of test for soils: Part 3 Determination of specific gravity Section 1 fine
grained soils
IS 2720 : Part III : Sec 2 : 1980 Test for Soils - Part III : Determination of Specific Gravity - Section 2 : Fine,
Medium and Coarse Grained Soils
IS 2720 : Part 4 : 1985 Methods of Test for Soils - Part 4 : Grain Size Analysis
IS 2720 : Part 5 : 1985 Method of Test for Soils - Part 5 : Determination of Liquid and Plastic Limit
IS 2720 : Part 6 : 1972 Methods of test for soils: Part 6 Determination of shrinkage factors
IS 2720 : Part VII : 1980 Methods of Test for Soils - Part VII : Determination of Water Content-Dry Density
Relation Using Light Compaction
IS 2720 : Part 8 : 1983 Methods of Test for Soils - Part 8 : Determination of Water Content-Dry Density
Relation Using Heavy Compaction
IS 2720 : Part 9 : 1992 Methods of test for soils: Part 9 Determination of dry density- moisture content relation
by constant weight of soil method
IS 2720 : Part 10 : 1991 Methods of test for soils: Part 10 Determination of unconfined compressive strength
IS 2720 : Part 11 : 1993 Methods of test for soils: Part 11 Determination of the Shear Strength Parameters of
a specimen tested in inconsolidated, indrained triaxial compression without the measurement of pore water
pressure
IS 2720 : Part 12 : 1981 Methods of test for soils: Part 12 Determination of shear strength parameters of soil
from consolidated undrained triaxial compression test with measurement of pore water pressure
IS 2720 : Part 13 : 1986 Methods of Test for Soils - Part 13 : Direct Shear Test
IS 2720 : Part 14 : 1983 Methods of Test for Soils - Part 14 : Determination of Density Index (Relative
Density) of Cohesionless Soils
IS 2720 : Part XV : 1965 Methods of Test for Soils - Part XV : Determination of Consolidation Properties
IS 2720 : Part 16 : 1987 Methods of Test for Soil - Part 16 : Laboratory Determination of CBR
IS 2720 : Part 17 : 1986 Methods of Test for Soils - Part 17 : Laboratory Determination of Permeability
IS 2720 : Part 18 : 1992 Methods of test for Soils - Part 18 : Determination of Field Moisture Equivalent
IS 2720 : Part 19 : 1992 Methods of Test for Soils - Part 19 : Determination of Centrifuge Moisture Equivalent
IS 2720 : Part 20 : 1992 Methods of test for soils: Part 20 Determination of linear shrinkage

38
IS 2720 : Part XXI : 1977 Methods of Test for Soils - Part XXI : Determination of Total Soluble Solids
IS 2720 : Part 22 : 1972 Methods of test for soils: Part 22 Determination of organic matter
IS 2720 : Part 23 : 1976 Methods of test for soils: Part 23 Determination of calcium carbonate
IS 2720 : Part XXIV : 1976 Methods of Test for Soils - Part XXIV : Determination of Cation Exchange Capacity
IS 2720 : Part 25 : 1982 Methods of test for soils: Part 25 Determination silica sesquioxide ratio
IS 2720 : Part 26 : 1987 Method of Test for Soils - Part 26 : Determination of pH Value
IS 2720 : Part 27 : 1977 Methods of test for soils: Part 27 Determination of total soluble sulphates
IS 2720 : Part 28 : 1974 Methods of test for soils: Part 28 Determination of dry density of soils inplace, by the
sand replacement method
IS 2720 : Part XXIX : 1975 Methods of Test for Soils - Part XXIX : Determination of Dry Density of Soils In-
place by the Core-cutter Method
IS 2720 : Part 30 : 1980 Methods of test for soils: Part 30 Laboratory vane shear test
IS 2720 : Part 31 : 1990 Methods of Test for Soils - Part 31 : Field Determination of California Bearing Ratio
IS 2720 : Part 33 : 1971 Methods of test for soils: Part 33 Determination of the density in place by the ring and
water replacement method
IS 2720 : Part XXXIV : 1972 Methods of Test for Soils - Part XXXIV : Determination of Density of Soil In-place
by Rubber-balloon Method
IS 2720 : Part 35 : 1974 Methods of test for soils: Part 35 Measurement of negative pore water pressure
IS 2720 : Part 36 : 1987 Methods of test for soils: Part 36 Laboratory determination of permeability of granular
soils (constant head)
IS 2720 : Part 37 : 1976 Methods of test for soils: Part 37 Determination of sand equivalent values of soils and
fine aggregates
IS 2720 : Part 38 : 1976 Methods of test for soils: Part 38 Compaction control test (hilf method)
IS 2720 : Part XXXIX : Sec 1 : 1977 Methods of Test for Soils - Part XXXIX : Direct Shear Test for Soils
Containing Gravel - Section I : Laboratory Test
IS 2720 : Part XXXIX : Sec 2 : 1979 Methods of Test for Soils - Part XXXIX : Direct Shear Test for Soils
Containing Gravel - Section 2 : In-Situ Shear Test
IS 2720 : Part XL : 1977 Methods of Test for Soils - Part XL : Determination of Free Swell Index of Soils
IS 2720 : Part XLI : 1977 Methods of Test for Soils - Part XLI : Measurement of Swelling Pressure of Soils
IS 2809 : 1972 Glossary of Terms and Symbols Relating to Soil Engineering
IS 2810 : 1979 Glossary of terms relating to soil dynamics
IS 2911 : Part 1 : Sec 1 : 1979 Code of practice for design and construction of pile foundations: Part 1
Concrete piles, Section 1 Driven cast in-situ concrete piles
IS 2911 : Part 1 : Sec 2 : 1979 Code of practice for design and construction of pile foundations: Part 1
Concrete piles, Section 2 Bored cast-in-situ piles
IS 2911 : Part 1 : Sec 3 : 1979 Code of practice for design and construction of pile foundations: Part 1
Concrete piles, Section 3 Driven precast concrete piles
IS 2911 : Part 1 : Sec 4 : 1984 Code of practice for design and construction of pile foundations: Part 1
concrete piles, Section 4 Bored precast concrete piles
IS 2911 : Part 2 : 1980 Code of practice for desing and construction of pile foundations: Part 2 Timber piles
IS 2911 : Part 3 : 1980 Code of practice for design and construction of pile foundations: Part 3 Under reamed
piles
IS 2911 : Part 4 : 1985 Code of practice for design and construction of pile foundations: Part 4 Load test on
piles
IS 2950 : Part I : 1981 Code of Practice for Design and Construction of Raft Foundations - Part I : Design
IS 2974 : Part I : 1982 Code of Practice for Design and Construction of Machine Foundations - Part I :
Foundation for Reciprocating Type Machines
IS 2974 : Part 2 : 1980 Code of practice for design and construction of machine foundations: Part 2

39
Foundations for impact type machine (hammer foundations)
IS 2974 : Part 3 : 1992 Code of practice for design and construction of machine foundations: Part 3
Foundations for rotary type machines (Medium and high frequency)
IS 2974 : Part 4 : 1979 Code of practice for design and construction of machine foundations: Part 4
Foundations for rotary type machines of low frequency
IS 2974 : Part 5 : 1987 Code of practice for design and construction of machine:foundations Part 5
Foundations for impact machines other than hammers (forging and stamping press, pig breakers, drop
crusher and jolter)
IS 4091 : 1979 Code of Practice for Design and Construction of Foundations for Transmission Line Towers
and Poles
IS 4332 : Part 1 : 1967 Methods of test for stabilized soils: Part 1 Methods of sampling and preparation of
stabilized soils for testing
IS 4332 : Part II : 1967 Methods of Test for Stabilized Soils - Part II : Determination of Moisture Content of
Stabilized Soil Mixtures
IS 4332 : Part 3 : 1967 Methods of test for stabilized soils: Part 3 Test for determination of moisture content-
dry density relation for stablized soils mixtures
IS 4332 : Part 4 : 1968 Methods of test for stabilized soils: Part 4 Wetting and drying, freezing and thawing
tests for compacted soil-cement mixtures
IS 4332 : Part 5 : 1970 Methods of test for stabilizd soils: Part 5 Determination of unconfined compressive
strength of stablized soils
IS 4332 : Part VI : 1972 Methods of Test for Stabilized Soils - Part VI : Flexural Strength of Soil-cement Using
Simple Beam With Third-point Loading
IS 4332 : Part VII : 1973 Methods of Test for Stabilized Soils - Part VII : Determination of Cement Content of
Cement Stabilized Soils
IS 4332 : Part 8 : 1969 Methods of test for stablized soils: Part 8 Determination of lime content of lime
stablized soils
IS 4332 : Part IX : 1970 Methods of Test for Stabilized Soils - Part IX : Determination of the Bituminous
Stabilizer Content of Bitumen and Tar Stabilized Soils
IS 4332 : Part 10 : 1969 Methods of test for stabilized soils: Part 10 Test for soil/bituminous mixtures
IS 4434 : 1978 Code of practice for in-situ vane shear test for soils
IS 4968 : Part 1 : 1976 Method for subsurface sounding for soils: Part 1 Dynamic method using 50 mm cone
without betonite slurry
IS 4968 : Part II : 1976 Method for Subsurface Sounding for Soils - Part II : Dynamic Method Using Cone and
Bentonite Slurry
IS 4968 : Part 3 : 1976 Method for subsurface sounding for soils: Part 3 Static cone penetration test
IS 5249 : 1992 Method of test for determination of dynamic properties of soil
IS 6403 : 1981 Code of practice for determination of bearing capacity of shallow foundations
IS 8009 : Part I : 1976 Code of Practice for Calculation of Settlements of Foundations - Part I : Shallow
Foundations Subjected to Symmetrical Static Vertical Loads
IS 8009 : Part II : 1980 Code of Practice for Calculation of Settlement of Foundations - Part II : Deep
Foundations Subjected to Symmetrical Static Vertical Loading
IS 8763 : 1978 Guide for undistrubed sampling of sands and sandy soils
IS 9198 : 1979 Specification for compaction rammer for soil testing
IS 9214 : 1979 Method for determination of modulus of sub-grade reaction (k-value) of soils in the field
IS 9259 : 1979 Specification for liquid limit apparatus for soils
IS 9456 : 1980 Code of practice for design and construction of conical and hyperbolic paraboloidal types of
shell foundations
IS 9556 : 1980 Code of practice for design and construction of diaphragm walls
IS 9640 : 1980 Specification for split spoon sampler

40
IS 9669 : 1980 Specification for CBR moulds and its accessories
IS 9716 : 1981 Guide for lateral dynamic load test on piles
IS 9759 : 1981 Guidelines for de-watering during construction
IS 10042 : 1981 Code of practice for site-investigations for foundation in gravel boulder deposits
IS 10074 : 1982 Specification for compaction mould assembly for light and heavy compaction test for soils
IS 10077 : 1982 Specification for equipment for determination of shrinkage factors
IS 10108 : 1982 Code of practice for sampling of soils by thin wall sampler with stationery piston
IS 10270 : 1982 Guidelines for design and construction of prestressed rock anchors
IS 10379 : 1982 Code of practic for field control of moisture and compaction of soils of embankment and
subgrade
IS 10442 : 1983 Specification for earth augers (spiral type)
IS 10589 : 1983 Specification for equipment for determination of subsurface sounding of soils
IS 10837 : 1984 Specification for moulds and accessories for determination of density index (relative density)
of cohesionless soils
IS 11089 : 1984 Code of practice for design and construction of ring foundation
IS 11196 : 1985 Specification for equipment for determination of liquid limit of soils cone penetration method
IS 11209 : 1985 Specification for mould assembly for determination of permeability of soils
IS 11229 : 1985 Specification for shear box for testing of soils
IS 11233 : 1985 Code of practice for design and construction of radar antenna, microwave and TV tower
foundations
IS 11550 : 1985 Code of practice for field instrumentation of swelling pressure in expansive soils
IS 11593 : 1986 Specification for shear box (large) for testing of soils
IS 11594 : 1985 Specification for thin walled sampling tubes and sampler heads
IS 11629 : 1986 Code of practice for installation and operation of single point hydraulic over-flow setting
gauge
IS 12023 : 1987 Code of practice for field monitoring of movement of structures using tape extensometer
IS 12175 : 1987 Specification for rapid moisture meter for rapid determination of water content for soil
IS 12208 : 1987 Method for measurement of earth pressure by hydraulic pressure cell
IS 12287 : 1988 Specification for consolidometer for determination of consolidation properties
IS 12979 : 1990 Specification for mould for determination of linear shrinkage
IS 13094 : 1992 Guidelines for selection of ground improvement techniques for foundation in weak soils
IS 13301 : 1992 Guidelines for vibration isolation for machine foundations
IS 13468 : 1992 Specification for apparatus for determination of dry density of soils by core cutter method
IS 14893 : 2001 Non-Destructive Integrity Testing of Piles (NDT) - Guidelines
IS 15284 : Part 1 : 2003 Design and Construction for Ground Improvement - Guidelines - Part 1 : Stone
Columns

CED-44 METHOD OF MEASUREMENT OF WORKS OF CIVIL ENGINEERING Number of Standards -- 30

Standard Description
SP 27 : 1987 Handbook on method of measurement of buildings works
IS 1200 : Part 1 : 1992 Methods of measurement of building and civil engineering works: Part 1 Earthwork
IS 1200 : Part 2 : 1974 Method of measurement of building and engineering works: Part 2 concrete works
IS 1200 : Part III : 1976 Method of Measurement of Building and Civil Engineering Works - Part III : Brickwork

41
IS 1200 : Part 4 : 1976 Method of measurement of building and civil engineering works: Part 4 stone masonry
IS 1200 : Part 5 : 1982 Method of measurement of building and civil engineering works: part 5 form work
IS 1200 : Part 6 : 1974 Method of measurement of building and civil engineering works: Part 6 refractory work
IS 1200 : Part 7 : 1972 Method of measurement of building and civil engineering works: Part 7 hardware
IS 1200 : Part 8 : 1993 Method of measurement of building and civil engineering work: Part 8 steel work and
iron work
IS 1200 : Part 9 : 1973 Method of measurement of building and civil engineering work: Part 9 roof covering
(including cladding)
IS 1200 : Part 10 : 1973 Method of measurement of building and civil engineering works: part 10 ceiling and
linings
IS 1200 : Part 11 : 1977 Method of measurement of building and civil engineering work: Part11 paving, floor
finishes dado and skirting
IS 1200 : Part XII : 1976 Method of Measurement of Building and Civil Engineering Works - Part XII :
Plastering and Pointing
IS 1200 : Part 13 : 1994 Method of measurement of building and civil engineering works: Part 13
Whitewashing, colour washing, distampering and painting of building surfaces
IS 1200 : Part 14 : 1984 Method of measurement of building and civil engineering works: Part 14 glazing
IS 1200 : Part 15 : 1987 Method of measurement of building and civil engineering works: Part 15 painting,
polishing, varnishing etc
IS 1200 : Part 16 : 1979 Method of measurement of building and civil engineering works: Part 16 laying of
water and sewer lines including appurtenant items
IS 1200 : Part 17 : 1985 Method of measurement of building and civil engineering works: Part 17 road work
including air field pavements
IS 1200 : Part 18 : 1974 Method of measurement of building and civil engineering works: Part 18 demolition
and dismantling
IS 1200 : Part XIX : 1981 Method of Measurement of Building and Civil Engineering Works - Part XIX : Water
Supply, Plumbing and Drains
IS 1200 : Part 20 : 1981 Method of measurement of building and civil engineering works: Part 20 laying of gas
and oil pipelines
IS 1200 : Part 21 : 1973 Method of measurement of building and civil engineering works: Part 21 wood-work
and joinery
IS 1200 : Part 22 : 1982 Method of measurement of building and civil engineering works: Part 22 materials
IS 1200 : Part 23 : 1988 Method of measurement of building and civil engineering works: Part 23 piling
IS 1200 : Part 24 : 1983 Method of measurement of building and civil engineering works: Part 24 well
foundations
IS 1200 : Part 25 : 1971 Method of measurement of building and civil engineering works: Part 25 tunneling
IS 1200 : Part 26 : 1987 Method of measurement of building and civil engineering works: Part 26 Acid
resistant lining
IS 1200 : Part 27 : 1992 Method of measurement of building and civil engineering works: Part 27 Earthwork
done by mechanical appliances
IS 1200 : Part 28 : 1992 Methods of measurement of building and civil engineering works: Part 28 Sound
insulation works
IS 3861 : 2002 Method of Measurement of Plinth, Carpet and Rentable Area of Buildings

CED-46NATIONAL BUILDING CODE Number of Standards --1

Standard Description
SP 7 : 1983 National buiding code of India 1983

42
 CED-47 PORTS AND HARBOURS Number of Standards -- 11
Standard Description
IS 4651 : Part 1 : 1974 Code of practice for planning and design of ports and harbours: Part 1 Site
investigation
IS 4651 : Part 2 : 1989 Code of practice for planning and design of ports and harbours: Part 2 Earth pressure
IS 4651 : Part III : 1974 Code of Practice for Planning and Design of Ports and Harbours - Part III : Loading
IS 4651 : Part 4 : 1989 Code of practice for planning and design of ports and harbours: Part 4 General design
consideration
IS 4651 : Part 5 : 1980 Code of practice for planning and design of ports and harbours: Part 5 Layout and
functional requirements
IS 7314 : 1974 Glossary of terms relating to port and harbour engineering
IS 9527 : Part 1 : 1981 Code of practice for design and construction of port and harbour structures: Part 1
Concrete monoliths
IS 9527 : Part 3 : 1983 Code of practice for design and construction of port and harbour structures: Part 3
Sheet pile walls
IS 9527 : Part 4 : 1980 Code of practice for design and construction of port and harbour structures: Part 4
Cellular sheet pile structures
IS 9527 : Part 6 : 1989 Code of practice for design and construction port and harbour structures Part 6 Block
work
IS 10020 : Part 4 : 1981 Recommendations for design and construction of port and harbour components: Part
4 Slipways

CED-48 ROCK MECHANICS NUMBER OF STANDARDS -- 51

Standard Description
IS 7317 : 1993 Code of practice for uniaxial jacking test for deformation modulus of rock
IS 7746 : 1991 Code of practice for in-situ shear test on rock
IS 8764 : 1998 Method of determination of point load strength index of rocks
IS 9143 : 1979 Method for the determination of unconfined compressive strength of rock materials
IS 9179 : 1979 Method for the preparation of rock specimen for laboratory testing
IS 9221 : 1979 Method for the determination of modulus of elasticity and Poisson's ratio of rock materials in
uniaxial compression
IS 10050 : 1981 Method for determination of slake durability index of rocks
IS 10082 : 1981 Method of test for the determination of tensile strength by indirect tests on rock specimens
IS 10782 : 1983 Method for laboratory determination of dynamic modulus of rock core specimens
IS 11309 : 1985 Method of conducting pull-out test on anchor bars and rock bolts
IS 11315 : Part 1 : 1987 Method for the quantitative description of discontinuities in rock mass: Part 1
Orientation
IS 11315 : Part 2 : 1987 Mehod for the quantitative description of discontinuities in rock mass: Part 2 Spacing
IS 11315 : Part 3 : 1987 Method for the quantitative description of discontinuities in rock mass: Part 3
Persistence
IS 11315 : Part 4 : 1987 Method for the quantitative description of discontnuities in rock mass: Part 4
Roughness
IS 11315 : Part 5 : 1987 Method for the quantitative description of discontinuities in rock mass: Part 5 Wall
strength
IS 11315 : Part 6 : 1987 Mehod for the quantitative description of discontinuities in rock mass: Part 6 Aperture

43
IS 11315 : Part 7 : 1987 Method for the quantitative description of discontinuities in rockmass: Part 7 Filling
IS 11315 : Part 8 : 1987 Method for the quantitative description of discontinuities in rock mass: Part 8
Seepage
IS 11315 : Part 9 : 1987 Method for the quantitative description of discontinuities in rockmass: part 9 Number
of sets
IS 11315 : Part 10 : 1987 Method for the quantitative description of discontinuities in rock mass : Part 10
Block size
IS 11315 : Part 11 : 1985 Method for the quantitative description of discontinuities in rock mass: Part 11 Core
recovery and rock quality
IS 11315 : Part 12 : 1992 Method for the quantitative description of disconntinuities in rock mass:: Part 12
Drillcore study
IS 11358 : 1987 Glossary of terms and symbols relating to rock mechanics
IS 12070 : 1987 Code of Practice for Design and Construction of Shallow Foundations on Rocks
IS 12608 : 1989 Methods of test for hardness of rock
IS 12634 : 1989 Method of determination for direct shear strength of rock joints
IS 12955 : Part 1 : 1990 Code of practice for in-situ determination of rock mass deformability using a flexible
dilatometer Part 1 volume change
IS 12955 : Part 2 : 1990 Code of practice for in-siitu determination of rock mass deformability using flexible
dilatometer Part 2 Radial displacement
IS 13030 : 1991 Method of test for laboratory determination of water content, porosity, density and related
properrties of rock material
IS 13047 : 1991 Method for determination of strength of rock materials in triaxial compression
IS 13063 : 1991 Code of practice for structural safety of buildings on shallow foundations on rocks
IS 13365 : Part 1 : 1998 Quantitative classification system of rock mass - Guidelines : Part 1 RMR for
predicting of engineering properties
IS 13365 : Part 2 : 1992 Quantitative classification systems of rock mass-Guidelines Part 2 Rock mass quality
for prediction of support pressure in underground openings
IS 13365 : Part 3 : 1997 Guidelines for classification system of rock mass Part 3 Determination of slope mass
rating (SMR)
IS 13372 : Part 1 : 1992 Code of practice for seismic testing of rock mass Part 1 within a borehole
IS 13372 : Part 2 : 1992 Code of practice for seismic testing of rock mass Part 2 Between the borehole
IS 13414 : 1992 Guidelines for monitoring of rock movement and multi-point borehole extensometers
IS 13946 : Part 1 : 1994 Code of practice for in-situ determination of rock stress Part 1 Using hydraulic
fracturing technique
IS 13946 : Part 2 : 1994 Code of practice for determination of rock stress Part 2 Using USBM type drill hole
deformation gauge
IS 13946 : Part 3 : 1994 Code of practice for determination of rock stress Part 3 Using a CSIR or CSIRO type
cell with 9 or 12 strain gauges
IS 13946 : Part 4 : 1994 Determination of rock stress-Code of practice Part 4 Using flat jack technique
IS 14243 : Part 1 : 1995 Guidelines for selection and development of site for building in hill areas Part 1
Microzonation of urban centres
IS 14243 : Part 2 : 1995 Guidelines for selection and development of site for building in hill areas Part 2
Selection and development
IS 14395 : 1996 Guidelines for monitoring of rock movements using probe inclinometer
IS 14396 : Parts 1 to 4 : 1996 Argillaceous Swelling Rocks - Methods for Laboratory Testing
IS 14436 : 1997 Method of test for laboratory determination of resistivity on rock specimen
IS 14448 : 1997 Code of practice for reinforcement of rock slopes with plane edge failure
IS 14593 : 1998 Design and construction of bored cast-in-situ piles founded on rocks - Guidelines

44
 IS 14881 : 2001 Method for Blast Vibration Monitoring - Guidelines
IS 15026 : 2002 Tunnelling Methods in Rock Masses -- Guidelines
IS 15180 : 2002 Guidelines for Use in Prediction of Subsidence and Associated Parameters in Coal Mines
Having Nearly Horizontal Single Seam Workings

CED-49 OFFSHORE INSTALLATIONS Number of Standards -- 3

Standard Description
IS 13519 : 1992 Guidelines for inspection of fixed steel offshore structures during fabrication and installation
IS 13746 : 1993 Code of practice for geotechnical investigation of offshore jacket structure
IS 13802 : 1993 Guidelines for planning and execution of seabed engineering (Geophysical) survey for
offshore platforms and pipelines

CED-50 PLASTIC PIPING SYSTEM Number of Standards -- 53

Standard Description
SP 57 (QAWSM) : 1993 Handbook on Pipes and Fittings for Drinking Water Supply
IS 3076 : 1985 Specification for Low Density Polyethylene Pipes for Potable Water Supplies
IS 4984 : 1995 Specification for high density polyethylene pipes for potable water supplies
IS 4985 : 2000 Unplasticized PVC Pipes for Potable Water Supplies - Specification
IS 7634 : Part 1 : 1975 Code of practice for plastic pipes work for potable water supplies: Part 1 Choice of
materials and general recommendations
IS 7634 : Part 2 : 1975 Code of practice for plastics pipe work for potable water supplies: Part 2 Laying and
jointing polyethylene (PE) pipes
IS 7634 : Part 3 : 2003 Plastics Pipes Selection, Handling, Storage and Installation for Potable Water Supplies -
Code of Practice - Part 3 : Laying and Jointing of UPVC Pipes
IS 7834 : Part 1 : 1987 Specification for injection moulded PVC fittings with solvent cement joints for water
supplies: Part 1 General requirements
IS 7834 : Part 2 : 1987 Specification for injection moulded PVC fittings with solvent cement joints for water
supplies: Part 2 Specific requirements for 45 degrees elbows
IS 7834 : Part 3 : 1987 Specification for injection moulded PVC socket fittings with solvent cement joints for
water supplies: Part 3 Specific requirements for 90 degree elbows
IS 7834 : Part 4 : 1987 Specification for injection moulded PVC socket fittings with solvent cement joints for
water supplies: Part 4 Specific requirements for 90 degree tees
IS 7834 : Part 5 : 1987 Specification for Injection Moulded PVC Socket Fittings With Solvent Cement Joints for
Water Supplies - Part 5 : Specific Requirements for 45ø Tees
IS 7834 : Part 6 : 1987 Specification for injection moulded PVC socket fittings with solvent cement joints for
water supplies: Part 6 Specific requirements for sockets
IS 7834 : Part 7 : 1987 Specification for injection moulded PVC socket fittings with solvent cement joints for
water supplies: Part 7 Specific requirements for unions
IS 7834 : Part 8 : 1987 Specification for injection moulded PVC socket fittings with solvent cement joints for
water supplies: Part 8 Specific requirements for caps
IS 8008 : Part 1 : 2003 Injection Moulded/Machined High Density Polyethylene (HDPE) Fittings for Potable
Water Supplies - Specification - Part 1 : General Requirements for Fittings
IS 8008 : Part 2 : 2003 Injection Moulded/Machined High Density Polyethylene (HDPE) Fittings for Potable
Water Supplies - Specification - Part 2 : Specific Requirements for 90° Bend
IS 8008 : Part 3 : 1976 Specification for injection moulded HDPE fittings for potable water supplies: Part 3
Specification for 90 degree tees
IS 8008 : Part 4 : 2003 Injection Moulded/Machined High Density Polyethylene (HDPE) Fittings for Potable
Water Supplies - Specification - Part 4 : Specific Requirements for Reducers
IS 8008 : Part 5 : 2003 Injection Moulded/Machined High Density Polyethylene (HDPE) Fittings for Potable

45
Water Supplies - Specification - Part 5 : Specific Requirements for Ferrule Reducers
IS 8008 : Part 6 : 1976 Specification for injection moulded HDPE fittings for potable water supplies: Part 6
Specific requirements for pipe ends
IS 8008 : Part 7 : 1976 Specification for injection moulded HDPE fittings for potable water supplies: Part 7
Specific requirements for sandwich flanges
IS 8360 : Part 1 : 1977 Specification for fabricated high density polyethylene (HDPE) fittings for potable water
supplies: Part 1 General requirements
IS 8360 : Part 2 : 1977 Specification for fabricated high density polyethylene (MDPE) fittings for potable water
supplies, Part 2 Specific requirements for 90 tees
IS 8360 : Part 3 : 1977 Specification for fabricated high density polyethylene (HDPE) fittings for potable water
supplies, Part 3 Specifc requirements for 90 bends
IS 9271 : 1979 Farm drainage plastic pipes
IS 10124 : Part 1 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part I General
requirements
IS 10124 : Part 2 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 2 Specific
requirements for sockets
IS 10124 : Part 3 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 3 Specific
requirements for straight reducers
IS 10124 : Part 4 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 4 Specific
requirements for caps
IS 10124 : Part 5 : 1988 Specification for fabricated PVC fittings for potable water supplies: part 5 Specific
requirements for equal tees
IS 10124 : Part 6 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 6 Specific
requirements for flanged tail piece with metallic flanges
IS 10124 : Part 7 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 7 Specific
requirements for threaded adaptors
IS 10124 : Part 8 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 8 Specific
requirements for 90 degree bends
IS 10124 : Part 9 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 9 Specific
requirements for 60 degree bends
IS 10124 : Part 10 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 10 Specific
requirements for 45 degree bends
IS 10124 : Part 11 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 11 Specific
requirements for 30 dgree bends
IS 10124 : Part 12 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 12 Sspecific
requirements for 22 1/2 degree bends
IS 10124 : Part 13 : 1988 Specification for fabricated PVC fittings for potable water supplies: Part 13 Specific
requirements for 11 1/4 degree bends
IS 12231 : 1987 Specification for Unplasticized PVC Pipes for Use in Suction and Delivery Lines of Agricultural
Pump Sets
IS 12235 : Parts 1 to 11 : 1986 Methods of Test for Unplasticized PVC Pipes for Potable Water Supplies
IS 12709 : 1994 Specification for glass-fibre reinforced plastic (GRP) pipes joints and fittings for use for potable
water supply
IS 12818 : 1992 Specification for unplasticized PVC screen and casing pipes for bore/tubewell
IS 13592 : 1992 Specification for UPVC pipes for soil and waste discharge systems inside buiildings including
ventilation and rainwater system
IS 13593 : 1992 Specification for UPVC pipe fittings to be used with the UPVC pipes in the suction and delivery
lines of agricultural pumps
IS 13916 : 1994 Code of practice for installation of glass fibre reinforced plastic (GRP) piping system
IS 14333 : 1996 High density polyethylene pipe for sewerage - Specification

46
IS 14402 : 1996 Specification for GRP pipes joints and fittings for sewerage, industrial waste and water (other
than potable)
IS 14735 : 1999 - Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste
Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System - Specification
IS 14787 : 2000 Unplasticized PVC Pipes (Ducts) and Fittings for Underground Telecommunications Cable
Installation - Specification
IS 14885 : 2001 Polyethylene Pipes for the Supply of Gaseous Fuels - Specification
IS 15265 : 2003 Flexible PVC Pipes or Polymer Reinforced Thermoplastic Hoses for Suction and Delivery Lines
of Agricultural Pumps - Specification
IS 15328 : 2003 Unplasticized Non-Pressure Polyvinyl Chloride ( PVC - U ) Pipes for use in Underground
Drainage and Sewerage Systems - Specification

CED-51 HOUSING Number of Standards -- 3

Standard Description
IS 8888 : Part 1 : 1993 Guide for requirements of low income housing Part 1 Urban area
IS 13727 : 1993 Guide for requirements of cluster planning for housing
IS 14213 : 1994 Code of practice for construction of walls using precast concrete stone masonry blocks

CED-53 CEMENT MATRIX PRODUCTS Number of Standards -- 89

Standard Description
IS 458 : 1988 Specification for Precast Concrete Pipes (with and without Reinforcement)
IS 459 : 1992 Indian Standard Corrugated and semi-corrugated asbestos cement sheets - Specification
IS 783 : 1985 Code of practice for laying of concrete pipes
IS 784 : 2001 Prestressed Concrete Pipes (Including Fittings) - Specification
IS 785 : 1998 Reinforced Concrete Poles for Overhead Power and Telecommunication Lines - Specification
IS 1332 : 1986 Specification for precast reinforced concrete street lighting poles
IS 1592 : 2003 Asbestos Cement Pressure Pipes and Joints - Specification
IS 1626 : Part 1 : 1994 Specification for asbestos cement building pipes and pipe fittings, gutters and gutter
fittings and roofing fittings Part 1 Pipe and pipe fittings
IS 1626 : Part 2 : 1994 Specification for asbestos cement building pipes and pipe fittings, gutters and gutter
fittings and roofing fittings Part 2 Gutter and gutter fittings )
IS 1626 : Part 3 : 1994 Asbestos Cement Building Pipes and Pipe Fittings, Gutters and Gutter Fittings and
Roofing Fittings - Specification - Part 3 : Roofing Fittings
IS 1678 : 1998 Specification for prestressed concrete poles for overhead power, traction and
telecommunication lines
IS 1916 : 1989 Specification for steel cylinder pipe with concrete lining and coating
IS 2096 : 1992 Specification for asbestos cement flat sheets
IS 2098 : 1997 Specification for asbestos cement building boards
IS 2174 : 1962 Specification for reinforced concrete dust bins
IS 2185 : Part I : 1979 Specification for Concrete Masonry Units - Part I : Hollow and Solid Concrete Blocks
IS 2185 : Part 2 : 1983 Specification for concrete masonry units: Part 2 Hollow and solid light weight concrete
blocks (superseding IS:3590)
IS 2185 : Part 3 : 1984 Specification for concrete masonry units Part 3 Autoclaved cellular Aerated concrete
blocks (Superseding IS:5482)
IS 2193 : 1986 Specification for Precast Prestressed Concrete Street Lighting Poles
IS 2572 : 1963 Code of practice for construction of hollow concrete block masonry

47
IS 2905 : 1989 Methods of test for concrete poles for overhead power and telecommunication lines
IS 3007 : Part 1 : 1999 Laying of Asbestos Cement Sheets - Code of Practice - Part 1 : Corrugated Sheets
IS 3007 : Part II : 1965 Code of Practice for Laying of Asbestos Cement Sheets - Part II : Semi-Corrugated
Sheets
IS 3597 : 1998 Methods of test for concrete pipes
IS 3632 : 1969 Method of test for determination of wet volume of asbestos fibre
IS 4350 : 1967 Specification for concrete porous pipes for under-drainage
IS 4844 : 1968 Method of sampling and preparation of asbestos fibre for laboratory test purposes
IS 4996 : 1984 Specification for reinforced concrete fence posts
IS 5328 : 1969 Method of test for determination of chemical composition of asbestos fibre
IS 5748 : 1969 Methods of test for tensile strength of asbestos fibre
IS 5751 : 1984 Specification for Precast Concrete Coping Blocks
IS 5758 : 1984 Specification for Precast Concrete Kerbs, Channels, Edgings, Quadrants and Gutter Aprons
IS 5820 : 1970 Specification for precast concrete cable cover
IS 5913 : 2003 Asbestos Cement Products - Methods of Test
IS 6041 : 1985 Code of practice for construction of autoclaved cellular concrete block masonry
IS 6042 : 1969 Code of practice for construction of lightweight concrete block masonry
IS 6441 : Part 1 : 1972 Methods of test for autoclaved cellular concrete products: Part I Determination of unit
weight or bulk density and moisture content
IS 6441 : Part II : 1972 Methods of Test for Autoclaved Cellular Concrete Products - Part II : Determination of
Drying Shrinkage
IS 6441 : Part IV : 1972 Methods of Test for Autoclaved Cellular Concrete Products - Part IV : Corrosion
Protection of Steel Reinforcement in Autoclave Cellular Concrete
IS 6441 : Part V : 1972 Methods of Test for Autoclaved Cellular Concrete Products - Part V : Determination of
Compressive Strength
IS 6441 : Part 6 : 1973 Methods of test for autoclaved cellular concrete products: Part VI Strength, deformation
and cracking of flexural members subjects to bending, short duration loading test
IS 6441 : Part 7 : 1973 Methods of test for autoclaved cellular concrete products: Part VII Strength, deformation
and cracking of flexural members subject to bending sustained loading test
IS 6441 : Part VIII : 1973 Methods of Tests for Autoclave Cellular Concrete Products - Part VIII : Loading Tests
for Flexural Members in Diagonal Tension
IS 6441 : Part 9 : 1973 Methods of test for autoclaved cellular concrete products: Part IX Jointing of autoclaved
cellular concrete elements
IS 6523 : 1983 Specification for Precast Reinforced Concrete Door and Window Frames
IS 6530 : 1972 Code of practice for laying of asbestos cement pressure pipes
IS 6908 : 1991 Specification for asbestos cement pipes and fittings for sewerage and drainage
IS 7319 : 1974 Specification for perforated concrete pipes
IS 7321 : 1974 Code of practice for selection, handling and erection of concrete poles for overhead power and
telecommunication lines
IS 7322 : 1985 Specification for specials for steel cylinder reinforced concrete pipes
IS 7639 : 1975 Methods of sampling of asbestos cement products
IS 8870 : 1978 Specification for Asbestos Cement Cable Conduits and Troughs
IS 9375 : 1979 Specification for precast reinforced concrete plant guards
IS 9627 : 1980 Specification for asbestos cement pressure pipes (light duty)
IS 9690 : 1980 Method of test for determination of openness or fibrization of chrysotile asbestos fibre by air
permeability method using Dyckerhoff apparatus
IS 9691 : 1980 Method of test for length distribution (wet classification of fibre length) of chrysotile asbestos

48
fibre using Bauer Mcnett classifier
IS 9745 : 1981 Method for determining strength giving properties of asbestos fibre
IS 9872 : 1981 Specification for precast concrete septic tanks
IS 9893 : 1981 Specification for precast concrete blocks for lintels and sills
IS 11267 : 1985 Method of test for length distribution (wet classification of fibre length) of chrysotile asbestos
fibre using Turner and Newall classifier
IS 11275 : 1985 Method of test for determination of crudiness and grit content of asbestos fibre
IS 11276 : 1985 Method of test for determination of openness or fiberization of chrysotile asbestos fibre by air
permeability method using rapid surface area apparatus
IS 11450 : 1986 Method for Determination of Airborne Asbestos Fibre Concentration in Work Environment by
Light Microscopy (Membrane Filter Method)
IS 11451 : 1986 Recommendations for Safety and Health Requirements Relating to Occupational Exposure to
Asbestos
IS 11707 : 1986 Glossary of terms relating to asbestos
IS 11767 : 1986 Recommendations for cleaning of premises and plants using asbestos fibres
IS 11768 : 1986 Recommendations for disposal of asbestos waste material
IS 11769 : Part 1 : 1987 Guidelines for safe use of products containing asbestos: Part 1 Asbestos cement
products
IS 11769 : Part 2 : 1986 Guidelines for safe use of products containing asbestos: Part 2 Friction materials
IS 11769 : Part 3 : 1986 Guidelines for safe use of products containing asbestos: Part 3 Non-cement asbestos
products other than friction materials
IS 11770 : Part 1 : 1987 Recommendations for control of emission of asbestos dust in premises manufacturing
products containing asbestos: Part 1 Asbestos cement products
IS 11770 : Part 2 : 1986 Recommendations for control of emission of asbestos dust in premises manufacturing
products containing asbestos: Part 2 Friction materials
IS 11770 : Part 3 : 1987 Recommendations for control of emission of asbestos dust in premises manufacturing
products containing asbestos: Part 3 Non-cement asbestos products other than friction materials
IS 12078 : 1987 Recommendations for personal protection of workers engaged in handling asbestos
IS 12079 : 1987 Recommendations for packaging, transport and storage of asbestos
IS 12080 : 1987 Recommendations for local exhaust ventilation systems in premises manufacturing products
containing asbestos
IS 12081 : Part 1 : 1987 Recommendations for pictorial warning signs and precautionary notices for asbestos
and products containing asbestos: Part 1 Workplaces
IS 12081 : Part 2 : 1987 Recommendations for Pictorial Warning Signs and Precautionary Notices for Asbestos
and Products Containing Asbestos - Part 2 : Asbestos and its Products
IS 12082 : Part 1 : 1987 Recommendations for control of asbestos emission: Part 1 Mining of asbestos ore
IS 12082 : Part 2 : 2001 Control of Asbestos Emission - Recommendations - Part 2 : Milling of Asbestos Ore
IS 12440 : 1988 Specification for precast concrete stone masonry blocks
IS 12592 : 2002 Precast Concrete Manhole Cover and Frame - Specification
IS 13000 : 1990 Silica-asbestos-cement Flat Sheets - Specification
IS 13008 : 1990 Specification for shallow corrugated asbestos cement sheets
IS 13158 : 1991 Specification for prestressed concrete circular spun poles for overhead power, traction and
telecommunication lines
IS 13356 : 1992 Specification for precast ferrocement water tanks up to 10000 litres capacity
IS 14862 : 2000 Fibre Cement Flat Sheets - Specification
IS 14871 : 2000 Products in Fibre Reinforced Cement - Long Corrugated or Asymmetrical Section Sheets and
Fittings for Roofing and Cladding - Specification
IS 15155 : 2002 Bar/Wire Wraped Steel Cylinder Pipes With Mortarlining and Coating (Including Specials) --

49
Specification

CED-54 CONCRETE REINFORCEMENT Number of Standards -- 13

Standard Description
IS 432 : Part 1 : 1982 Specification for mild steel and medium tensile steel bars and hard-drawn steel wire for
concrete reinforcement: Part I Mild steel and medium tensile steel bars
IS 432 : Part 2 : 1982 Specification for mild steel and medium tensile steel bars and hard-drawn steel wire for
concrete reinforcement: Part 2 Hard-drawn steel wire
IS 1566 : 1982 Specification for Hard-drawn Steel Wire Fabric for Concrete Reinforcement
IS 1785 : Part I : 1983 Specification for Plain Hard-drawn Steel Wire for Prestressed Concrete - Part I : Cold
Drawn Stress-relieved Wire
IS 1785 : Part 2 : 1983 Specification for plain hard-drawn steel wire for prestressed concrete: Part 2 As drawn
wire
IS 1786 : 1985 Specification for high strength deformed steel bars and wires for concrete reinforcement
(superseding IS:1139-1966)
IS 2090 : 1983 Specification for high tensile steel bars used in prestressed concrete
IS 6003 : 1983 Specification for indented wire for prestressed concrete
IS 6006 : 1983 Specification for uncoated stress relieved strand for prestressed concrete
IS 10790 : Part 1 : 1984 Methods of sampling of steel for prestressed and reinforced concrete part 1
Prestressing steel
IS 10790 : Part 2 : 1984 Methods of sampling of steel for prestressed and reinforced concrete Part 2
Reinforcing steel
IS 13620 : 1993 Specification for fusion boned epoxy coated reinforcing bars
IS 14268 : 1995 Specification for uncoated stress relieved low relaxation seven ply strand for prestressed
concrete

CED-55 Sieves sieving and other sizing Methods Number of Standards -- 20

Standard Description
IS 460 : Part 1 : 1985 Specification for test sieves: Part I Wire cloth test sieves
IS 460 : Part 2 : 1985 Specification for test sieves: Part II Perforated plate test sieves
IS 460 : Part 3 : 1985 Specification for test sieves: Part III Methods of examination of apertures of test sieves
IS 1568 : 1970 Specification for wire cloth for general purposes
IS 1607 : 1977 Methods for test sieving
IS 2405 : Part 1 : 1980 Specification for industrial sieves: Part 1 Wire cloth sieves
IS 2405 : Part II : 1980 Specification for Industrial Sieves - Part II : Perforated Plates
IS 3150 : 1982 Specification for Hexagonal Wire Netting for General Purposes
IS 4124 : 1981 Glossary of terms relating to powders
IS 4879 : 1968 Method of sub-division of gross sample of powder used for determination of particle size
IS 4961 : 1968 Determination of particle size of powders by air elutriatioin methods
IS 5257 : 1969 Specification for eyepiece and screen graticule for determination of particle size of powders
IS 5258 : 1969 Determination of particle size of powders by optical microscope method
IS 5282 : 1969 Liquid sedimentation methods for determination of particle size of powders
IS 5421 : 1981 Glossary of terms relating to test sieves and test sieving

50
IS 5742 : Part 1 : 1970 Terms and symbols for sieve bottoms: Part I Woven and welded wire screens
IS 5742 : Part 2 : 1970 Terms and symbols for sieve bottoms: Part II Perforated plates
IS 8425 : 1977 Code of practice for determination of specific surface area of powders by air permeability
method
IS 10483 : 1983 Code for designating perforations of industrial plate sieves (identical with ISO/DIS 7806)
IS 11578 : 1986 Method for determination of specific surface area of powder and porous particle using low
temperature gas adsorption techniques

CED-56 HILL AREA DEVELOPMENT ENGINEERING Number of Standards -- 7

IS 14458 : Part 1 : 1998 Guidelines for retaining wall for hill area: Part 1 Selection of type of wall
IS 14458 : Part 2 : 1997 Guidelines for retaining wall for hill area: Part 2 Design of retaining/breast walls
IS 14458 : Part 3 : 1998 Guidelines for retaining wall for hill area: Part 3 Construction of dry stone walls
IS 14496 : Part 2 : 1998 Guidelines for preparation of landslide - Hazard zonation maps in mountainous
terrains: Part 2 Macro-zonation
IS 14680 : 1999 Landslide Control – Guidelines
IS 14804 : 2000 Siting, Design and Selection of Materials for Residential Buildings in Hilly Areas – Guidelines
IS 14961 : 2001 Guidelines for Rain Water Harvesting in Hilly Areas by Roof Water Collection System

51