Scribd
Upload
53 views2 pages

YC162A

This document provides specifications for the TC1602A 16-character 2-line LCD controller module. It includes details on the display size, character size, pin connections, electrical characteristics, and a block diagram. The module has a 80.0mm x 36.0mm x 10.0mm size and uses a 5V single power supply. It has 16 pins for functions like data input/output, instruction selection, and enabling the display.

Uploaded by

babymyhanh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views2 pages

YC162A

This document provides specifications for the TC1602A 16-character 2-line LCD controller module. It includes details on the display size, character size, pin connections, electrical characteristics, and a block diagram. The module has a 80.0mm x 36.0mm x 10.0mm size and uses a 5V single power supply. It has 16 pins for functions like data input/output, instruction selection, and enabling the display.

Uploaded by

babymyhanh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TC1602A

* 16 Characters 2 line * Controller LSI built-in * +5V single power supply


EXTERNAL DIMENSIONS AND DISPLAY PATTERN
括号内为带背光型号尺寸

MECHANICAL DATA(Nominal dimensions) PIN CONNECTION


Module size - - - - - - - - - - 80.0WX36.0HX10.0Dmm Pin No. symbol Lever Function
Effective display area - -- - - - - - - 64.5WX13.8H mm 1 Vss -- 0V
Charater size(5X8dots) - - - - - - - - 3.0WX5.5H mm 2 Vdd -- +5V
Charater pitch - - - - - - - - - - - - - - 3.52X5.88 mm 3 Vo -- --
Dot size - - - - - - - - -- - - - - - - - - - 0.52WX0.60H mm L:Instruction code input
4 RS H/L
Weight - - - - - - - - - - - - - - - - - - - - - - - - about 40 g H:Data input
ABSOLUTE MAXIMUM RATINGS min max. H:Data read
5 R/W H/L
Power supply for logic (Vdd - Vss ) - - - - 0 7.0V L : Data write
Power supply for LCD drive(Vdd-Vo) - - 0 5.0V 6 E H.H-L Enable singal
Input voltage (Vi ) - - - - - - - - - - - - - - - Vss Vdd V 7 D0 H/L
0perating temperature (Ta ) - - - - - - - - - 0 55c 8 D1 H/L
Storage temperature (Tstg ) - - - - - - - - - -20 60c 9 D2 H/L
ELECTRICAL CHARACTERISTICS 10 D3 H/L Data bus line *
Ta = 25c, Vdd = 5.0 + 0.25V 11 D4 H/L
Input ' high ' voltage ( Vih ) - - - - - - - - - - - 3.5V min. 12 D5 H/L
Input ' low ' voltage (Vil ) - - - - - - - - - - - - 0.55V max. 13 D6 H/L
Output 'high' voltage(Voh)(-Ioh=0.1mA) - - - 3.75V min. 14 D7 H/L
Output low' voltage(Vol )( Iol = 0.1mA )- - - - 1.0V max. 15 LED+ 5V Power supply for LED
Power supply current(Idd (Vdd=5.0 V) - - - 2.0mAmax. 16 LED- 0V Power supply for LED
Drive method - - - - - - - - - - - - 1 / 16 Duty, 1 / 5 Bias. * In case of 4 bits instruction, data is transfetrred
by twice using only 4 buses of D4 - D7 ,and D0 - D3
are not used , first operation is highter order 4 bits
and second is lower 4 bits of 8 bits , but in case
of 8 bits instruction , data is transferred by data
by data bus of D0 - D7.
BLOCK DIAGRAM POWER SUPPLY

You might also like