100% found this document useful (1 vote)
2K views1 page

Snowhite 80

This document provides specifications for Snowhite 80 calcined kaolin produced by China Mineral Processing Limited. It lists key properties including a brightness of 93% minimum, 80% minimum passing -2 microns, bulk density between 0.3-0.5 kg/litre, and chemical analysis showing 49-55% silicon dioxide and 42-46% aluminum oxide as the primary components. The kaolin has tight controls on contaminant levels including 0.4% maximum iron oxide.

Uploaded by

Mateus Pacheco
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
2K views1 page

Snowhite 80

This document provides specifications for Snowhite 80 calcined kaolin produced by China Mineral Processing Limited. It lists key properties including a brightness of 93% minimum, 80% minimum passing -2 microns, bulk density between 0.3-0.5 kg/litre, and chemical analysis showing 49-55% silicon dioxide and 42-46% aluminum oxide as the primary components. The kaolin has tight controls on contaminant levels including 0.4% maximum iron oxide.

Uploaded by

Mateus Pacheco
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

China Mineral Processing Limited

SnowhiteTM 80 CALCINED KAOLIN


Snowhite 80 is fine sized and superwhite Kaolin produced with delaminating
and accurate calcination process.

Specifications
Brightness(ISO457nm) 93 Min
+325 mesh 0.005% Max
-2Micron 80% Min
Moisture Content 0.5% Max
Bulk Density (Kg/litre) 0.3 - 0.5
Specific Gravity 2.7g/ccm
Surface Area(BET;m2/g) 9~14
Oil Absorption(g/100g) 55-65
PH Value 6-8

Chemical analysis by X-ray Fluorescence


SiO2 49-55% Typical
Al2O3 42-46% Typical
Fe2O3 0.4% Max
TiO2 0.8% Max
CaO 0.5% Max
MgO 0.3% Max
K2O 0.1% Max
Na2O 0.2% Max
MnO 0.004% Max
Loss on ignition 0.5% Max

You might also like