0% found this document useful (0 votes)
2K views6 pages

GPRS MMS Activate Setting For Hotlink DiGi Celcom, Useful Info!!

This document provides instructions for configuring GPRS and MMS settings for several Malaysian mobile networks, including Maxis, DiGi, and Celcom. It explains how to activate GPRS and 3G via SMS codes like *133# and *136# for Maxis. Both OTA and manual configuration steps are outlined for WAP GPRS and MMS settings for each network, including APN, username, password, and proxy details. Links to network operator websites are also provided for online configuration.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
2K views6 pages

GPRS MMS Activate Setting For Hotlink DiGi Celcom, Useful Info!!

This document provides instructions for configuring GPRS and MMS settings for several Malaysian mobile networks, including Maxis, DiGi, and Celcom. It explains how to activate GPRS and 3G via SMS codes like *133# and *136# for Maxis. Both OTA and manual configuration steps are outlined for WAP GPRS and MMS settings for each network, including APN, username, password, and proxy details. Links to network operator websites are also provided for online configuration.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

I'm setting this is for the purpose of that most of the user

still doesnt know how to activated the setting yet. Hope


with this thread, most of the member can do it without any
problem

Hotlink/Maxis
QUOTE

For Hotlink GPRS Activation

1. Press *133# to activate your Gprs & MMS

For the setting

1. SMS "GPRS "BRAND" "MODEL" and sent to 22333 example "gprs nokia n70"
2. SMS "MMS "BRAND" "MODEL" and sent to 22333 example "mms nokia n70"

For Hotlink 3g Activation

1. Press *136# to activate your 3G and 3G MMS (you can activate it for non-3g phone also)

For the setting

1. SMS "3Gwap "BRAND" "MODEL" and sent to 22333 example "3gwap nokia n70"
2. SMS "3GMMS "BRAND" "MODEL" and sent to 22333 example "3gmms nokia n70"

Maxis Website Online Configuration

https://portal.dmssys.maxis.com.my/tms-self...08-FAE70A2DEFDD

If the above requires pin or password, it is " 0123"

Maxis Manual Configuration


QUOTE
Maxis

OTA at http://www.maxis.com.my/3G/about3G.asp and choose option 3G Phone Configuration


Manual WAP Settings
• On Desk, tab Control Panel -> Internet setup. (or similar) 
• Tab New access pt. and tab No, then tab Next and key in the following:
Connection name: Maxis GPRS / Maxis 3G
Data bearer: GPRS 
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: net / unet
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: maxis
Password: wap 
• Tab Next then tab Finish and OK to complete the setup. 
• Homepage: http://wap.maxis.com.my/wml/index.wml 
• Session Mode: Permanent 
• IP adress: 202.075.133.049 
• Login Type: Automatic, 
• Authentication Type: Normal 
MMS Settings

OTA at http://www.maxis.com.my/3G/about3G.asp and choose option 3G Phone Configuration

• On Desk, tab Messaging and then press the Menu key -> Tools -> Message settings -> Multimedia
message…(or similar) 
• Tab Internet setup, then tab Next and key in the following:
Internet settings name: Maxis MMS 
Data bearer: GPRS 
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: net / unet
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: maxis
Password: wap 
• Tab Next then tab Advanced, under Proxies, key in the following:
Protocol: HTTP
Use proxy: (Checked)
Proxy server address: 202.75.133.49
Port number: 80 
• Tab OK then Finish 
• Under Homepage, key in http://172.16.74.100:10021/mmsc and tab OK to complete the setup. 
• To send a MMS, under the Messaging menu, tab New multimedia msg.
Note : Blue color is for 3g setting
Provided by sakuraguy with allytom assist on 3g setting 

For DiGi GPRS Activation 


QUOTE

http://www.digi.com.my/data_services/gprs/...fig.do?page=web

Digi Manual Configuration


QUOTE
DiGi

OTA at http://www.digi.com.my/internet/3g/phone_setup.html

Manual WAP Settings


• On Desk, tab Control Panel -> Internet setup. (or similar) 
• Tab New access pt. and tab No, then tab Next and key in the following:
Connection name: DiGi GPRS
Data bearer: GPRS 
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: digiwap 
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: digi
Password: digi 
• Tab Next then tab Finish and OK to complete the setup. 

MMS Settings

OTA at http://www.digi.com.my/data_services/gprs/...fig.do?page=web

• On Desk, tab Messaging and then press the Menu key -> Tools -> Message settings -> Multimedia
message… (or similar) 
• Tab Internet setup, then tab Next and key in the following:
Internet settings name: DiGi MMS
Data bearer: GPRS 
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: digimms 
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: mms
Password: mms 
• Tab Next then tab Advanced, under Proxies, key in the following:
Protocol: HTTP
Use proxy: (Checked)
Proxy server address: 203.92.128.160
Port number: 80 
• Tab OK then Finish 
• Under Homepage, key in http://mms.digi.com.my/servlets/mms and tab OK to complete the setup. 
• To send a MMS, under the Messaging menu, tab New multimedia msg.

Credit to sakuraguy

For Celcom GPRS And MMS Activation


QUOTE

http://www.channelx.com.my/mdp/gprs/wap_config.jsp

or

Dail 1111 from your mobile

Apart of getting settings from the network provider, or they failed,


or you still have not receive anything after 30 hours and 20 times of
doing the instructions above, you can always head to the phone
manufacturer website and get the settings there.

It is as simple as, click the link below, then follow the instruction
below. Usually, they will ask for your phone model, then your
country, then the network provider, then key in your no. and the
setting will be sent independently. Credit to youngkies and sakuraguy

Celcom Manual Configuration


QUOTE
Celcom

Celcom (MMS & GPRS): http://www.celcom.com.my/cep/productservic...RSMMS/main.html

Go to Write Message. 
• Type gprspre (for prepaid) send to 95000 or b Type gprspost (for postpaid) send to 95000 
• You will receive the settings & save / install all settings. 
• You will be charge SMS send RM0.15 and SMS received RM0.40

Or refer to manual
at http://www.channelx.com.my/mdp/gprs/wap_config.jsp andhttp://www.celcom.com.my/cep/produ
ctservic...RSMMS/main.html

• Manual WAP GPRS Settings


• On Desk, tab Control Panel -> Internet setup.(or similar) 
• Tab New access pt. and tab No, then tab Next and key in the following:
Connection name: Celcom GPRS
Data bearer: GPRS 
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: celcom.net.my (Postpaid)
Access point: celcom (Prepaid) 
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: (Blank)
Password: (Blank) 
• Tab Next then tab Finish and OK to complete the setup. 

MMS Settings

Or refer to manual
at http://www.channelx.com.my/mdp/gprs/wap_config.jsp andhttp://www.celcom.com.my/cep/produ
ctservic...RSMMS/main.html

• On Desk, tab Messaging and then press the Menu key -> Tools -> Message settings -> Multimedia
message…(or similar) 
• Tab Internet setup, then tab Next and key in the following:
Internet settings name: Celcom MMS
Data bearer: GPRS 
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: mms.celcom.net.my (Postpaid)
Access point: celcom (Prepaid) 
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: (Blank)
Password: (Blank) 
• Tab Next then tab Advanced, under Proxies, key in the following:
Protocol: HTTP
Use proxy: (Checked)
Proxy server address: 10.128.1.242
Port number: 8080 
• Tab OK then Finish 
• Under Homepage, key in http://mms.celcom.net.my and tab OK to complete the setup. 
• To send a MMS, under the Messaging menu, tab New multimedia msg. 

Credit to sakuraguy

You might also like