Scribd
Upload
74 views

Encoder

The HT12A/E 212Series encoders are low power and high noise immunity CMOS chips for use in remote control systems like security systems, garage door controllers, and cordless phones. They can encode information consisting of address bits and data bits for transmission via radio frequency or infrared signals. The HT12A operates from 2.4-5V while the HT12E operates from 2.4-12V, and both have low standby current.

Uploaded by

Jyotirekha Pati
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
74 views

Encoder

The HT12A/E 212Series encoders are low power and high noise immunity CMOS chips for use in remote control systems like security systems, garage door controllers, and cordless phones. They can encode information consisting of address bits and data bits for transmission via radio frequency or infrared signals. The HT12A operates from 2.4-5V while the HT12E operates from 2.4-12V, and both have low standby current.

Uploaded by

Jyotirekha Pati
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

HT12A/HT12E 212Series of Encoders

Features:-
Operating voltage

2.4V~5V for the HT12A


2.4V~12V for the HT12E
Low power and high noise immunity CMOS technology
Low standby current: 0.1mA (typ.) at VDD=5V
HT12A with a 38kHz carrier for infrared transmission medium

Minimum transmission word


- Four words for the HT12E
- One word for the HT12A
Built-in oscillator needs only 5% resistor
Data code has positive polarity
Minimal external components
HT12A/E: 18-pin DIP/20-pin SOP package
Applications:-
Burglar alarm system
Smoke and fire alarm system
Garage door controllers
Car door controllers

Car alarm system


Security system
Cordless telephones
Other remote control systems
General Description:-
The HT12 encoders are a series of CMOS LSIs for remote control system

applications. They are capable of encoding information which consists of N

address bits and 12-N data bits. Each address/data input can be set to one of the

two logic states. The programmed addresses/data are transmitted together with the

header bits via an RF or an infrared transmission medium upon receipt of a

trigger signal. The capability to select a TE trigger on the HT12E or a DATA

trigger on the HT12A further enhances the application flexibility of the 212 series

of encoders .The HT12A additionally provides a 38kHz carrier for infrared


systems.

You might also like