Scribd Logo
Upload

Welcome to Scribd!

  • 155 views

    Crib

    Uploaded by

    skumarsr
    This document summarizes the design of steel cribs with square hollow sections. It calculates properties like the section area, moment of inertia, radius of gyration, and checks that the crib design meets requirements for safe load capacity, local buckling resistance, shear and bending stresses. The crib passes all checks and is determined to be structurally safe and code compliant.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLSX, PDF, TXT or read online from Scribd

    Crib

    Uploaded by

    skumarsr
    155 views1 page
    This document summarizes the design of steel cribs with square hollow sections. It calculates properties like the section area, moment of inertia, radius of gyration, and checks that the crib design meets requirements for safe load capacity, local buckling resistance, shear and bending stresses. The crib passes all checks and is determined to be structurally safe and code compliant.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of steel cribs with square hollow sections. It calculates properties like the section area, moment of inertia, radius of gyration, and checks that the crib design meets requirements for safe load capacity, local buckling resistance, shear and bending stresses. The crib passes all checks and is determined to be structurally safe and code compliant.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    155 views1 page

    Crib

    Uploaded by

    skumarsr
    This document summarizes the design of steel cribs with square hollow sections. It calculates properties like the section area, moment of inertia, radius of gyration, and checks that the crib design meets requirements for safe load capacity, local buckling resistance, shear and bending stresses. The crib passes all checks and is determined to be structurally safe and code compliant.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    You are on page 1of 1

    Design of cribs 600

    Member: ISA
    Grade of steel = Fe 250
    65 x 65 x 6
    A 7.44 744 mm2
    Ixx = Iyy 29.1 291000 mm4
    Cxx = Cyy 1.81 18.1 mm 600
    rmin 1.26 12.6 mm

    Safe Load on column


    A 744 mm2
    Nos 4
    At= 2976 mm2
    Ixx = Iyy = 4x(291000+744x(300-18.1)^2) 500 mm
    237659607
    rxx = ryy = 283 mm
    SQRT(237659607.36/4/744)
    Effective length of column = 6m
    6m
    λ= 21
    σ ac = 147.6 N/mm2

    P= 44 t 30 30

    Check for Local Buckling of compression members λ= Fe 250


    a= 540 mm 10 150
    Spacing,C = 500 mm 20 148
    rmin = 12.6 mm 30 145
    λe = 40
    As per codal requirment λe should be equal to or less than 0.7*λ or 50 whichver is less
    0.7 * λ = 15 Not safe

    Spacing
    C
    C/rmin ≤ 14.9 or < 50 of composite section
    14.9 x r min (of compression member)
    r min = 12.6 mm

    C= 187 mm

    Check for shearing and bending stresses

    No of parallel planes of battens,N = 2 No.s

    Min. transvers distance between bolts,S = 540 mm


    Transverse shear,V = 0.025P= 1.098 t
    Longitudinal shear,V1= VC/NS= 0.509 t
    Bending Moment,M = VC/2N= 1372962.8 Nmm

    Longitudinal shear stress = V1/A= 10.632 N/mm2


    Permissible average shear stress = 100 N/mm2
    Hence safe 180
    Bending stress = M/Z= 12 N/mm2 615
    Permissible bending stress = 165 N/mm2

    Hence safe

    You might also like