MATERIAL-COMPARISON-LIST

Comparison between ASME Material and another Material Specification and actual Material to be used

For Tube or Pipe

ET - Eddy Current Test

Manufacturers Process

Recertified acc. UG-10

( Stainless Steel only )

Dimension Tolerances
Specimen Orientation
Supplementary Tests
Tensile Yield Elongation Reduction

SA-370 Test-Method

UT - Ultrasonic Test
Marking of Material
Material Edition
Material Specification Strength Strength [%] of A

Number of Tests

Hydrostatic Test
Melting Practice
Melting Method
Grade

Corrosion Test

Flattening test
Desoxidation
Item or

Flaring Test

Flange Test
Type

Grain Size
Bend Test
Standard
Class Addenda [ MPa ] [ MPa ] Lo [%]

Note:
Results

MTR or CMTR No. / Designation : Date (MTR)

Actual

N = normalized

( Charpy-V ; ISO-V ; other )

Brinel, Rockwell, Vickers
Heat

Specimen Type
HR = hot rolled

Hardness Test
A =
Impact Test
annealed Treatment
CHEMICAL ANALYSES QT = quenched & tempered

Temperature [ Joule ]
item C Si Mn P S Cr Mo Ni V Al Nb Ti Cu N [ °C ] at [ °C ]

min [J]

at [ °C ]

min [J]

at [ °C ]
Results
Actual

min [J]

at [ °C ]

LEGEND: REMARKS: Verification by AUTHORIZED INSPECTOR:

+ Requirement fulfilled
- Requirement not fulfilled Date:
NR Not required
NA Not applicable Sign:

Material_Comparison_List.xls - Rev. 03/2004 (c) ONE/TÜV/BV