Scribd
Upload
50 views1 page

Problem 5 62

The 60 mm diameter steel shaft is subjected to a 400 Nm distributed torque at end A and a -600 Nm concentrated torque at point C, which is 0.8 m from end A. It also has a distributed torque of 2000 Nm/m along its length. The problem asks to determine the angle of twist at end A due to these applied torques. The solution finds the internal torque distribution, calculates the polar moment of inertia, and uses the torsion formula to determine the angle of twist is 0.432 degrees.

Uploaded by

Alphy da Moviebuff
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views1 page

Problem 5 62

The 60 mm diameter steel shaft is subjected to a 400 Nm distributed torque at end A and a -600 Nm concentrated torque at point C, which is 0.8 m from end A. It also has a distributed torque of 2000 Nm/m along its length. The problem asks to determine the angle of twist at end A due to these applied torques. The solution finds the internal torque distribution, calculates the polar moment of inertia, and uses the torsion formula to determine the angle of twist is 0.432 degrees.

Uploaded by

Alphy da Moviebuff
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Problem 5-62

The 60-mm-diameter solid shaft is made of A-36 steel and is subjected to the distributed and
concentrated torsional loadings shown. Determine the angle of twist at the free end A of the shaft due
to these loadings.
Given: L AC  0.6m L CB  0.8m do  60mm
T A  400N˜ m T C  600N˜ m
N˜ m
G  75GPa q  2000
m

Solution:
Internal Torque : As shown in the torque diagram.
T AC  TA

T CB = T A  TC  q˜ x

S 4
Angle of Twist : J ˜d
32 o
LCB
T AC˜ LAC 1 ´
IA =  ˜µ T CB dx
G˜ J G˜ J ¶
0
LCB
TAC˜ L AC 1 ´
IA   ˜µ T A  T C  q˜ x dx
G˜ J G˜ J ¶
0

IA 0.007545 rad

IA 0.432 deg Ans

You might also like