Scribd
Upload
68 views2 pages

15 Fta

Fault tree analysis is a graphical tool used to identify faults, causes, and countermeasures in product design and improvement. It represents critical failures, their causes, and potential solutions. It helps optimize processes, design for key factors, and identify root problems and remedies. To perform an analysis, a component is selected and its failures are identified. Causes for each failure are then listed and traced to their root causes. Countermeasures for each root cause are developed to address them.

Uploaded by

Susanoo12
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
68 views2 pages

15 Fta

Fault tree analysis is a graphical tool used to identify faults, causes, and countermeasures in product design and improvement. It represents critical failures, their causes, and potential solutions. It helps optimize processes, design for key factors, and identify root problems and remedies. To perform an analysis, a component is selected and its failures are identified. Causes for each failure are then listed and traced to their root causes. Countermeasures for each root cause are developed to address them.

Uploaded by

Susanoo12
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Fault Tree Analysis

What it is:
Fault tree analysis is a graphical representation of the major faults or critical failures associated
with a product, the causes for the faults, and potential countermeasures. The tool helps identify
areas of concern for new product design or for improvement of existing products. It also helps
identify corrective actions to correct or mitigate problems.

When to use it:


Fault tree analysis is useful both in designing new products/services or in dealing with identified
problems in existing products/services. In the quality planning process, the analysis can be used to
optimize process features and goals and to design for critical factors and human error. As part of
process improvement, it can be used to help identify root causes of trouble and to design remedies
and countermeasures.

How to use it:


Select a component for analysis. Draw a box at the top of the diagram and list the component
inside.

Identify critical failures or “faults” related to the component. Using Failure Mode and Effect
Analysis is a good way to identify faults during quality planning. For quality improvement, faults
may be identified through Brainstorming or as the output of Cause and Effect Analysis.

Identify causes for each fault. List all applicable causes for faults in ovals below the fault.
Connect the ovals to the appropriate fault box.

Work toward a root cause. Continue identifying causes for each fault until you reach a root or
controllable cause.

Identify countermeasures for each root cause. Use Brainstorming or a modified version of
Force Field Analysis to develop actions to counteract the root cause of each critical failure. Create
boxes for each countermeasure, draw the boxes below the appropriate root cause, and link the
countermeasure and cause.

06/23/98 page 1
Fault Tree Analysis Example

Adequate User Documentation Tree Diagram

Easy Reference Level of Complexity Frequently Asked Questions

Fault

no user tests no editing

indifference time time cost

etc.

Priorities Scheduling

Countermeasures

additional resources closer monitoring

clear
communication management commitment
of priorities

You might also like