Scribd
Upload
70 views1 page

Solution: Install The Print Driver and Scan Driver On A Microsoft Windows Operating System (OS)

The document provides instructions for installing a print driver and scan driver on a Windows operating system. It cautions the user to close all applications before beginning and notes the driver must already be downloaded. The steps then outline selecting the language, components, and clicking through windows to complete installation of the print and scan drivers.

Uploaded by

Antonio Rivera Mabini Jr.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
70 views1 page

Solution: Install The Print Driver and Scan Driver On A Microsoft Windows Operating System (OS)

The document provides instructions for installing a print driver and scan driver on a Windows operating system. It cautions the user to close all applications before beginning and notes the driver must already be downloaded. The steps then outline selecting the language, components, and clicking through windows to complete installation of the print and scan drivers.

Uploaded by

Antonio Rivera Mabini Jr.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Solution: Install the Print Driver and Scan Driver on a Microsoft

Windows Operating System (OS)


CAUTION: All applications should be closed on your computer before beginning
installation.

NOTE: This solution assumes that the correct print driver for this product and the operating
system you are using has been downloaded and extracted to a known location on the hard drive.
If you have not already done so, click on the [Drivers & Downloads] link under the Product
Resources section on this window to download a print driver.

The scan driver is required to allow the printer to scan from various applications on your
computer.

If the New Hardware Wizard window is displayed during the installation procedure, click [X] in
the upper, right corner of the window to close the window, or click [Cancel].

The print driver is software that lets your computer communicate with your printer. The
procedure to install drivers may differ depending on the operating system installed on the
computer.

The procedure below installs the printer as a local printer; a printer directly attached to your
computer using the printer cable supplied with your printer.

1. Make sure that the printer is connected to your computer using the USB cable, and the
computer and printer are both powered ON.
2. From the computer, navigate to the location where you downloaded and extracted the
software. Double-click on the [Setup.exe] file, then click [OK].

NOTE: If using the CD-ROM included with the printer, install the CD-ROM into the
CD-ROM drive. The CD-ROM should automatically run, and an installation window will
be displayed. If the installation window does not appear, click [Start] then click [Run].
Type: X:\Setup.exe, replacing 'X' with the letter which represents the computer drive.,
and then click [OK].

3. If necessary, select a language from the pull-down menu.


4. Click [Next]. The Select Components to Install window will be displayed.
5. Select the required components by clicking on the check box. For a typical install, select
both the [PC Scan] and [PC Print] check boxes.
6. Click [Next]. The You Have Chosen to Install window will be displayed. If the
information is not correct, click [Back] to return to the previous window.
7. Click [Next]. The Setup has Finished window will be displayed.
8. Click [Finish]. The installation of the print driver and scan driver is complete.

You might also like