The AT89S52 is a low-power, high-performance 8-bit microcontroller with 8K bytes of in-system programmable flash memory. It is compatible with the 80C51 instruction set and pinout and can be reprogrammed in-system or by a conventional programmer. By combining an 8-bit CPU with in-system programmable flash, the AT89S52 provides a powerful and cost-effective solution for embedded control applications.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
0 ratings0% found this document useful (0 votes)
63 views1 page
Micro Controller
The AT89S52 is a low-power, high-performance 8-bit microcontroller with 8K bytes of in-system programmable flash memory. It is compatible with the 80C51 instruction set and pinout and can be reprogrammed in-system or by a conventional programmer. By combining an 8-bit CPU with in-system programmable flash, the AT89S52 provides a powerful and cost-effective solution for embedded control applications.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1
8-bit Microcontroller with 8K Bytes In- System Programmable Flash The AT89S52 is a
low-power, high-performance CMOS 8-bit Microcontroller with 8K bytes of in-system
programmable Flash memory. The device is manufactured using Atmels high-density nonvolatile memory technology and is compatible with the indus try-standard 80C51 instruction set and pinout. The on-chip Flash allows the program memory to be reprogrammed in-system or by a conventional nonvolatile memory pro- grammer. By combining a versatile 8-bit CPU with in-system programmable Flash on a monolithic chip, the Atmel AT89S52 is a powerful Microcontroller which provides a highly-flexible and cost-effective solution to many embedded control applications. Futures of AT89S52 Micro Controller • Compatible with MCS-51 Products • 8K Bytes of In-System Reprogrammable Flash Memory • Fully Static Operation: 0 Hz to 33 MHz • Three-level Program Memory Lock • 256 x 8-bit Internal RAM • 32 Programmable I/O Lines • Three 16-bit Timer/Counters • Eight Interrupt Sources • Programmable Serial Channel • Low-power Idle and Power-down Modes • 4.0V to 5.5V Operating Range • Full Duplex UART Serial Channel • Interrupt Recovery from Power-down Mode • Watchdog Timer • Dual Data Pointer • Power-off Flag • Fast Programming Time • Flexible ISP Programming (Byte and Page Mode)