Scribd
Upload
29 views

Computer Architecture - Cs1251 Unit I

Cache memory is a small, fast RAM that stores copies of frequently used data from main memory. The CPU's arithmetic logic unit (ALU) performs arithmetic and logic operations on data brought to it by the processor. The control unit coordinates all computer operations by issuing timing signals that govern data transfer. It executes programs through a fetch-decode-execute cycle and can handle interrupts from I/O devices by running interrupt service routines.

Uploaded by

Elven Sepdracode
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
29 views

Computer Architecture - Cs1251 Unit I

Cache memory is a small, fast RAM that stores copies of frequently used data from main memory. The CPU's arithmetic logic unit (ALU) performs arithmetic and logic operations on data brought to it by the processor. The control unit coordinates all computer operations by issuing timing signals that govern data transfer. It executes programs through a fetch-decode-execute cycle and can handle interrupts from I/O devices by running interrupt service routines.

Uploaded by

Elven Sepdracode
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

COMPUTER ARCHITECTURE -CS1251

UNIT I
1.What is cache memory?
The small and fast RAM units are called as caches.when the execution of an
instruction calls for data located in the main memory,the data are fetched and a copy is
placed in the cache.Later if the same data is required it is read directly from the cache.

2. What is the function of ALU?


Most of the computer operations(arithmetic and logic) are performed in ALU.The
data required for the operation is brought by the processor and the operation is performed
by the ALU.

3. What is the function of CU?


The control unit acts as the nerve center,that coordinates all the computer
operations. It issues timing signals that governs the data transfer.

4. What are basic operations of a computer?


The basic operations are READ and WRITE.

5. What are the registers generally contained in the processor?


MAR-Memory Address Register
MDR-Memory Data Register
IR-Instruction Register
R0-Rn-General purpose Registers
PC-Program Counter

6. What are the steps in executing a program?


1.Fetch
2.Decode
3.Execute
4.Store

7. Define interrupt and ISR?


An interrupt is a request from an I/O device for service by the processor. The
processor provides the requested service by executing the interrupt service routine.

8. Define Bus?
A group of lines that serves as a connecting path for several devices is called a
bus.

9. What is the use of buffer register?


The buffer register is used to avoid speed mismatch between the I/O device and
the processor.
10. Compare single bus structure and multiple bus structure?
A system that contains only one bus(i.e only one transfer at a time) is called as a
single bus structure. A system is called as multiple bus structure if it contains multiple
buses.
11. What is System Software? Give an example?
It is a collection of programs that are executed as needed to perform functions
such as
o Receiving and interpreting user commands
o Entering and editing application programs and storing them as files
in secondary storage devices.

Ex: Assembler, Linker, Compiler etc

12.What is Application Software? Give an example?


Application programs are usually written in a high-level programming language,
in which the programmer specifies mathematical or text-processing operations. These
operations are described in a format that is independent of the particular computer used to
execute the program.

Ex: C, C++, JAVA

13. What is a compiler?


A system software program called a compiler translates the high-level language
program into a suitable machine language program containing instructions such as the
Add and Load instructions.

14. What is text editor?


It is used for entering and editing application programs. The user of this program
interactively executes command that allow statements of a source program entered at a
keyboard to be accumulated in a file.

15. Discuss about OS as system software?


OS is a large program,or actually a collection of routines,that is used to control
the sharing of and interaction among various computer units as they execute application
programs.The OS routines perform the tasks required to assign computer resources to
individual application programs.

16. What is multiprogrraming or multitasking?


The operating system manages the concurrent execution of several application
programs to make the best possible uses of computer resources.this pattern of
concurrent execution is called multiprogrraming or multitasking.

17.What is elapsed time of computer system?


The total time to execute the total program is called elapsed time.it is affected by
the speed of the processor,the disk and the printer.
18. What is processor time of a program?
The periods during which the processor is active is called processor time of a
programIt depends on the hardware involved in the execution of individual machine
instructions.
19. Define clock rate?
The clock rate is given by,
R=1/P,where P is the length of one clock cycle.

20. Write down the basic performance equation?


T=N*S/R
T=processor time
N=no of instructions
S=no of steps
R=clock rate

21.What is pipelining?
The overlapping of execution of successive instructions is called pipelining.

22. What is byte addressable memory?


The assignment of successive addresses to successive byte locations in the
memory is called byte addressable memory.

23. What is big endian and little endian format?


The name big endian is used when lower byte addresses are used for the more
significiant of the word.The name little endian is used for the less significiant bytes of the
word.

24. What is a branch instruction?


Branch instruction is a type of instruction which loads a new value
into the program counter.

25. What is branch target?


As a result of branch instructions , the processor fetches and executes
the instruction at a new address called branch target, instead of the instruction at
the location that follows the branch instruction in sequential address order.

26.What are condition code flags?


The processor keep track of information about the results of various
operations for use by subsequent conditional branch instructions. This is
accomplished by recording the required information in individual bits, often
called condition code flags.

27.Define addressing mode.


The different ways in which the location of an operand is
specified in an instruction are referred to as addressing modes.
Thank you for evaluating AnyBizSoft PDF to Word.

You can only convert 3 pages with the trial version.

To get all the pages converted, you need to purchase the software from:

http://www.anypdftools.com/buy/buy-pdf-to-word.html

You might also like