Scribd
Upload
172 views1 page

RLP434A

This document summarizes the specifications and characteristics of the RLP434A SAW based receiver module. It is a 315, 418, and 433.92 MHz ASK modulated receiver module with an 8-pin SMT package. It operates from 3.3-6V and outputs digital and linear data with a typical current draw of 4.5mA. Key specifications include a sensitivity of -110dBm, 500KHz channel width, 4KHz noise bandwidth, and 5ms turn on time. It is designed to work with a typical RF receiver application circuit using an HT12D decoder and HT48RXX microcontroller from Holtek Semiconductor.

Uploaded by

Sumanth Kandula
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
172 views1 page

RLP434A

This document summarizes the specifications and characteristics of the RLP434A SAW based receiver module. It is a 315, 418, and 433.92 MHz ASK modulated receiver module with an 8-pin SMT package. It operates from 3.3-6V and outputs digital and linear data with a typical current draw of 4.5mA. Key specifications include a sensitivity of -110dBm, 500KHz channel width, 4KHz noise bandwidth, and 5ms turn on time. It is designed to work with a typical RF receiver application circuit using an HT12D decoder and HT48RXX microcontroller from Holtek Semiconductor.

Uploaded by

Sumanth Kandula
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RLP434A SAW Based Receiver

43.42mm pin 1 : Gnd


pin 2 : Digital Data Output
pin 3 : Linear Output /Test
pin 4 : Vcc
11.5mm pin 5 : Vcc
1 2 3 4 5 6 7 8
3 4 7 8 pin 6 : Gnd
10.5mm 24.72mm pin 7 : Gnd
pin 8 : Antenna

Modulation : ASK
F
Frequency
requency 315,
requency 3 15,
1 5 , 418
4 1 8 and
a n d 433.92
4 3 3 . 9 2 Mhz
Mhz Supply Voltage : 3.3 - 6.0 VDC
Output : Digital & Linear

Symbol Parameter Conditions Min Typ Max


Vcc Operating supply voltage 3.3 5.0V 6.0 V
Itot Operating Current - 4 .5 mA
Vdata Data Out Idata = +200 uA ( High ) Vcc-0.5 - Vcc V
Idata = -10 uA ( Low ) - - 0.3 V
Electrical Characteristics

Characteristics SYM Min Typ Max Unit


Operation Radio Frequency FC 315, 418 and 433.92 MHz
Sensitivity Pref -110 dBm
Channel Width +-500 Khz
Noise Equivalent BW 4 Khz
Receiver Turn On Time 5 ms
Operation Temperature Top -20 - 80 C
Baseboard Data Rate 4.8 KHz
Application Circuit :
Typical RF Receiver using HT12D-18DIP, a Binary 12 bit Decoder with 8 bit uC HT48RXX from
Holtek Semiconductor Inc.

Laipac Technology, Inc.


50 West Beaver Creek Rd. Richmond Hill Ontario L4B 1G5 Canada
Tel: (905)762-1228 Fax: (905)763-1737 e-mail: [email protected]

You might also like