CSRNWFP09

N ATION AL HIGHW AY AUT HORITY
MINISTRY OF COMMUNICATIONS
GOVERNMENT OF PAKISTAN
ISLAMABAD
COMPOSITE SCHEDULE OF RATES
JANUARY 2009
(NWFP)
Shabir Associates
Quantity Surveying & Construction Cost Consultants
FOREWARD
Following the increases in prices of materials and labour in the year 2008, the
revision / updation of CSR has been carried out. In the year 2008 we have seen the
prices of steel / diesel / bitumen go up considerably and towards the end of year
have come down. Analysts are still uncertain with the prices in the year 2009. For the
year 2009, we have carried out a general revision of all prices upto January 2009 in
consultation with leading manufacturer’s, supplier, and specialist contractors.
In the absence of standard fix formula the best engineering knowledge and rate
analysis practices are used to develop these rates. The variation in the proposed
rates is anticipated in certain cases, which may be due to varying degrees / levels of
productivity and price differences of various inputs at the regional level.
The rates, prices and outputs included in the resources and unit cost calculations,
including allowances for wastage, normal productivity and efficiency are based for
roadwork and bridge projects being carried out by NHA. The unit rates are average
unit rates for a particular district and not project specific. The market can change
very rapidly, which would obviously have an impact on the unit rates.
It must be understood that main objective of the CSR is to provide a realistic

reference base for preparing Cost Estimates / PC-I and Evaluation of Bids, for NHA
projects.
My gratitude to The Chairman NHA, Member (Finance), Member (Operations),

Member (Construction), Member (Motorway) and Member (Planning) without whose
guidance and support it would have been difficult to develop this Document.
In the end, my appreciation to my team for all the possible technical and professional
efforts to produce Revised Composite Schedule of Rates 2009.
It is hoped that the CSR 2009, would serve as a Basic Engineer’s Estimate
Reference Document for National Highway Authority, various Government
Departments and the construction industry in general.
Whilst all efforts are made to ensure the accuracy of the data and information used
in updating the CSR , neither NHA or M/s Shabir Associates can in any way accept
liability for loss of any kind resulting from the use of CSR made by any person,
institution, company, department etc.
Muhammad Shabir
Q.S & Estimation Specialist
Shabir Associates
i
CONTENTS
1. General
2. Manpower List
3. Material List
4. Plants & Equipment Owning and Operating Cost
5. Quarry Sites
6. Conversion Factors & Technical Data
7. List of Districts
8. CSR January 2009 Item Rates
ii
National Highway Authority Shabir Associates
Islamabad Quantity Surveying & Construction Cost Consultants
1. General
For many years National Highway Authority has been compiling / updating the
Composite Schedule of Rates for use in the Civil Engineering Industry. The
Civil Engineering Industry uses this Schedule of Rates for pricing work by the
application of unit rates to the quantities measured from the designer’s
drawings. The main objective of the CSR is to provide a realistic reference
base for cost estimates. One has to understand no two projects are the same,
there are variables which effect the price of the project i.e., the volume of work
below ground, embankment height, cut & fill, increased exposure to weather,
and the tremendous variety of the projects, in terms of type, complexity and
scale makes the straight forward use of unit rates less reliable. This
uncertainty is compounded by the lower number of bill items generated in Civil
Engineering Projects as compared to Building Works so that the precise
nature of work is less apparent from bill descriptions and the statistical effect
of ‘swings and roundabout’ has less scope to average out extremes of pricing.
To prepare a price for a Civil Engineering project, then, it is necessary to have

regard to the method to be adopted in executing the work, draw up a detailed
programme and then cost out the resources necessary to prosecute the
chosen method. The first part of this process is the province of construction
planner, there has been a tendency to postpone detailed estimating until the
tendering stage itself, with the employer relying upto that point upon an
estimate prepared on a ‘broad brush’ basis.
There is increasing growing pressure on the part of project sponsors for an

improvement to budgetary advice, so that a decision to commit expenditure to
a particular project is taken on firmer grounds. The absence of detailed price
method during the pre-contract phase also inhibits the accurate costing of
alternative designs and regular cost checking to ensure that the design is
being developed within the employer’s budget. The CSR gives unit rates for
use when quantities can be taken from available drawings. To take some note
of the range of unit rates that might apply to an item, the rates themselves are
in some cases related to working method – for example by identifying the
different types of plant that would suit varying circumstances. Nonetheless, it
would be folly to propose that all types of Civil Engineering work could be
covered by the use of CSR. While developing these unit rates, we had in mind
the type and scale of work to be commissioned by NHA.
The CSR does embrace the great majority of work undertaken by NHA.
Although almost all projects will have individual features that require careful
attention in pricing, there will be some projects that are so specialist that they
will not confirm to standard pricing information at all. But for most projects,
within the range of work covered, this CSR should provide a firm foundation
for:
Preparing Project Cost Estimate and PC-1
Evaluating Tender / Bids
iii
Evaluating Claims and Variation Order
Arbitration Matters
In order to prepare an authentic Composite Schedule of Rates and to keep it

effective, the basic requirements are as under:
Collection of first hand, prudent and legitimate information for inputs

(Manpower, Material & Equipment) in the rate analysis
Merging the above information in proper proportion according to Design

Specifications and Constructional requirements to create the rate of a work
item
Updating the data inputs every year or from time to time, to revalidate the
item rates
2. GENERAL METHODOLOGY:
a. Composite Schedule of Rates was originally published in the year 1991 and
subsequent revisions were carried out in 1995, 2000, 2005, 2006 and 2008.
There are total of 91 Districts considered and are given numbers in
Alphabetical order and their Province wise breakdown as under:
Province No of Districts
Punjab 34
Sind 16
NWFP 21
Balochistan 20
Specifications and Methodology for Construction items have been adopted as

given in General Specification of National Highway Authority (1998). Items of
work for construction have been given the same numbers as appearing in the
General Specifications of National Highway Authority.
b. These rates are based on the existing formulae and efficiency levels used in
the preparation of CSR 2005, 2006 and 2008 with some modifications.
c. The rates analysis of individual items of CSR 2009 consists of four basic
inputs, which have been assigned the same code numbers as in the previous
Composite Schedule of Rates.
i. Manpower code starting from 1001 onwards
ii. Material code starting from 2001 onwards
iii. Equipment code starting from 3001 onwards
iv. Overheads, Profits & Preliminaries
iv
d. For the preparation of rates following documents have been referred:
i. General Specifications 1998
ii. NHA Composite Schedule of Rates 2005, 2006 & 2008 and its basic data
iii. Statistical Bulletins by Federal Bureau of Statistics
iv. Current Market rates study
Code list of Manpower, Material and Equipment appear at the end of the
chapter for the convenience of the users.
2.1 MANPOWER:
a. Allocation of Code Numbers:
Costs of manpower engaged on Plant & Equipment have been included in

rental charges of Plant & Equipment and only site supervisory staff have been
considered under the heading of Manpower. Code numbers are allocated
accordingly to such manpower that is directly charged to the items of work.
Manpower cost for top supervision, administration and other non-productive
works of support services have been considered under overhead charges.
b. Formulation of Rates:
Manpower basic rates collected from districts have been first scrutinized, to
eliminate irrational information and following overheads are applied to include
fringe benefits and other charges:
i. Social Security Payment
ii. E.O.B.I. Payment
iii. Education Cess Payment
iv. Yearly Leave Salary (Earned, casual and sick)
v. Bonus (Compulsory)
vi. Provident Fund (Contribution of Employer) or Gratuity
vii. Mess Expenses (Site Staff)
viii. Entertainment Allowance (Provisional)
ix. Group Life Insurance
x. Site Staff Accommodation
After including above overheads, manpower rates for each of the 91 district
have been calculated and separate records developed for use by the
Computer Program.
v
2.2 CONSTRUCTION MATERIAL:
a. Allocation of Code Numbers to Materials:
List of materials required for road construction has been first prepared from
the construction items appearing in the General Specifications of National
Highway Authority. After arranging the construction material list in order, code
numbers have been allocated.
b. Formulation of Rates:
Considering the location of each district, Engineers decided the most

appropriate source of construction materials for all the code numbers. The
cost of material at source has been established from field data and
transportation rates calculated, to arrive at the landed cost of material at the
district headquarters.
c. Cost of Material
In order to arrive at a “Material at sources” rate, following considerations have

been made.
i. Material royalty at quarry (actual or estimated)
ii. Cost of Preparation of material
iii. Unauthorized local charges in the province of Balochistan and Sind
iv. Loading of material in truck / trailer etc
d. Cost of Transportation
Transportation charges have been taken as actual, where local transporters

are available. However, in some districts where local transporters rates are
not quoted, transportation charges graphs have been used.
In case of quarry materials, the source of materials for embankment, Sub-

Base or Base Course can be more than one; however, the most appropriate
source from the point of view of quality and economy has been used for
preparing the Composite Schedule of Rates – 2009.
2.3 PLANT AND EQUIPMENT
a. Allocation of Code Numbers
The list of plant and equipment includes major equipment whereas small
equipment, tools and attachments are ignored, as these have been charged
under the item of overhead. After arranging the list in order, code numbers
have been allocated starting from 3001 (onwards).
vi
b. Power, Performance and Maintenance of Plant & Equipment
To arrive at the decision for choosing the right horse power, appropriate
performance level and reasonable maintenance charges, the
recommendation of well known suppliers have been considered. In order to
decide the price level of any equipment, average cost has been used, which
includes C&F price, plus duties and taxes etc.
c. Formulation of Rates of Plant and Equipment
The owning and operating costs are similar for all the districts, unlike
manpower and materials where rates may differ for each district.
The owning and operating costs are developed by using a standard format.
The duties and taxes have been calculated as per the latest Excise and Land
Customs Tariff for calculating total cost of equipment.
Fuel consumption, working efficiency and maintenance costs have been fixed
after consulting the recommendation of the manufacturers. Equipment
economical life and tire life have been fixed after consulting several
organizations using heavy and light equipment in the present indigenous
conditions.
The owning and operating costs for 80 types of equipment is provided at the
end of this chapter.
2.4 FORMULAE FOR CONSTRUCTION ITEMS
All the basic inputs have been updated in the individual rates analysis. These
formulae have been created by appropriate quantitative inputs of the following
items.
Manpower Hour and Number

Material Weight, Volume, Length and Unit
Plant Equipment Hour and Number
Overheads, profit and 25 percent
preliminaries
2.5 OVERHEADS, PROFIT & PRELIMINARIES
a. Profit
The level of profit is governed by the degree of competition applicable to the

job which is in turn a function of the industry’s current work load. The
appropriate addition is highly variable.
b. Head Office Overheads
An addition to the estimate needs to be made to the net estimate to cover all
costs incurred in operating the central services provided by head office. Apart
vii
from general management and accountancy, this will normally include the
departments dealing with:
Tendering / Estimating
Planning & design
Wages and bonus
Finance Cost:- Some companies would include finance costs with head office
overheads, but this will vary from contractor to contractor.
The appropriate addition varies with the extent of services provided centrally
and company to company, rather than on site, and with size of organization.
c. Preliminaries
Preliminaries cost in Civil Engineering works or indirectly related to the actual

quantity of work being carried out. It comprises a definition of method related
charges, a checklist of items to be accounted for on typical Civil Engineering
Contract.
Generally contract document give detailed requirements for the facilities and
equipment to be provided for the employer and the Engineer’s Representative
given in the Bill of Quantities. Thus General Items given in the BOQ are
excluded from the check list of preliminaries.
The following checklist is representative but not exhaustive which is not

covered in the BOQ or General items section. The list describes the major
preliminaries which are included, implicitly or explicitly, in a typically Civil
Engineering Contract.
Contractor’s site on costs
Temporary works (other then those included in unit cost)
General purpose plant (other than those included in unit cost)
Other services, charges and fees
Site Staff Salaries
All non-productive supervisory staff on site i.e., agents, clerks,

computer operators, security guards, store men, drivers for staff
vehicles, cleaners, general labour for general clearance etc.
Plant Maintenance
Fitters, electricians and assistants engaged on general plant

maintenance on site (excludes drivers who are provided in the unit
costs)
Site Transport for Staff and General Use
Vehicles / buses provided for use of staff and others including running
costs etc.
viii
Contractors offices rental / construction / site huts and associated running

costs.
Canteen, welfare / medical
General office expenditure
Provision of postage, stationary and other consumables for general office use
Mobilization and demobilisation of resources.
Telecommunications
Furniture and equipment
Small tools
Traffic Control, traffic diversion and sign
Fencing
Protective clothing
Health and safety
Road lighting
Cleaning roads etc
Progress photographs
Water Supply
Electric connection
Notice boards and signs
Insurances / bonds / bank guarantees / Employees liabilities insurance etc.
There will be many other items of preliminaries which may have to be

considered, which probably will be project and site specific.
Preliminaries % percentage can vary from project to project.
d. Tax
Tax has been included as per Government rules.
In the CSR, 25% is added on the estimated unit cost of the items which
includes over heads, taxes, preliminaries and profit, however this will vary
from project to project and contractor to contractor.
2.6 VARIABLES EFFECTING THE RATE ANALYSIS
Rate analysis in CSR have been prepared based on policy explained here
above. However, there are certain factors required to be considered while
deciding about more realistic rates in special situations.
ix
a. Price Escalation
General and Special escalation has been considered as published by

Government Agencies. However, care is to be exercised to consider
Government Legislation, which may create condition of Special Escalation.
b. Double Taxation
In International tenders, a factor is to be considered which may handicap the

contractors from such countries, whose governments have no agreement with
the Government of Pakistan to avoid double taxation. Effect of this item will be
equal to the limit of tax level in such a country.
c. Service Roads
No provision has been made in this rate analysis for road diversion cost or
service road, which the contractor has to construct or maintain as a non-BOQ
item.
d. Extra Overhead for Expatriate Staff
International tenders will require a factor to employ expatriate staff on the

project. Effect of this will be equal to the actual expenses on such item.
e. Other Factors
Some of the items mentioned in above text included as overhead Cost in

Estimates of CSR, may appear as a B.O.Q item in a tender, the cost of such
items are to be adjusted from the total estimate of the project.
x
LIST OF MANPOWER
Man power Code Description
1001 SITE ENGINEER
1002 ASPHALT PLANT ENGINEER
1003 CONCRETE PLANT ENGINEER
1011 FOREMAN ASPHALT
1012 FOREMAN EARTHWORK
1013 FOREMAN CONCRETE
1014 GENERAL FOREMAN
1021 SUPERVISOR
1022 SURVEYOR
1023 ASSISTANT SURVEYOR
1031 MASON
1032 CARPENTER
1033 PAINTER
1034 STEEL BINDER/CUTTER
1040 HIGHLY SKILLED LABOUR
1041 HELPER
1042 WELDER
1051 LABOUR
Note:
Cost of following Manpower has been included elsewhere as under:
1. Top Management, Senior Engineers and above included in overhead

and preliminaries.
2. All indirect Manpower such as Clerk, Typist, Accountant, Lab staff,

Workshop staff, Store staff, Security staff etc. is included under overhead
and preliminaries.
3. All operators of Light and Heavy Duty Equipment and Plant Included in
the hourly rate of the equipment
xi
LIST OF MATERIAL
Material Code Description Unit
2001 ROCK CM
2002 SOIL CLASS-A1 CM
2014 CRUSHED AGGREGATE BASE A CM
2015 CRUSHED AGGREGATE BASE B CM
2016 CRUSHED AGGREGATE BASE B1 CM
2017 GRANULAR SUB-BASE A CM
2018 GRANULAR SUB-BASE B CM
2019 SAND CLASS C CM
2021 COARSE SAND CM
2022 FINE SAND CM
2023 AGGREGATE 2"-1.1/2" CM
2024 AGGREGATE 1.1/2"-3/4" CM
2025 AGGREGATE 3/4"-3/8" CM
2026 AGGREGATE 3/8"-EACH 4 CM
2027 AGGREGATE EACH4-EACH200 CM
2028 FILLER MATERIAL CM
2029 BRICK CLASS A EACH
2030 STONE RANDOM CLASS-A CM
2031 STONE RANDOM CLASS-B CM
2032 STONE RANDOM CLASS-C CM
2033 STONE RANDOM CLASS-D CM
2034 STONE DRESSED CM
2035 HAND BROKEN STONE 2.1/2"-1/2" CM
2041 ASPHALT GRADE 60/70 TON
2042 ASPHALT GRADE 80/100 TON
2043 ASPHALT M.C. 70 TON
2046 ASPHALT R.C. 70 TON
2049 ASPHALT S.S. 1 TON
2050 ASPHALT S.S. 1H TON
2051 ASPHALT R.S. 1 TON
2052 ASPHALT R.S. 2 TON
2053 CEMENT TYPE-I (OPC) BAG
2054 CEMENT TYPE-II (LOW S.R) BAG
2057 CEMENT TYPE-V (HIGH S.R) BAG
2058 ACCELERATOR LIT
2059 RETARDER LIT
2060 CURING COMPOUND LIT
2061 STEEL GRADE. 40 TON
2062 STEEL GRADE. 60 TON
xii
LIST OF MATERIAL
Material Code Description Unit

2063 PRE-STRESSING STRAND, 3/8", 1/2" TON
2064 STEEL WIRE MESH, 4" x 4" KG
2065 WATER 1000 LIT
2067 STEEL WIRE FABRIC AASHTO M-55 TON
2068 STEEL EXPANSION JOINT KG
2070 COLD STEEL WIRE AASHTO M-32 TON
2072 STRUCTURES SHAPES ASTM A-36 TON
2073 ELASTOMERIC BEARING PAD M-183 c.cm
2077 RCC PIPE CLASS-II 310 MM (AASHTO M-170) M
2091 CAT EYE SINGLE (RAISED PROFILE) EACH
2092 CAT EYE DOUBLE (RAISED PROFILE) EACH
2093 STEEL/METAL BEARING DEVICES KG
2095 BITUMEN IMPREGNATED FIBRE BOARD SM
2096 NEOPRENE RUBBER JOINT FELT SM
2097 ASPHALT FELT (3-PLY) SM
2098 PVC/NEOPRENE WATER STOPS (6") M
2099 BENTONITE POWDER KG
2100 JOINT SEALANT FILLER KG
2101 TRAFFIC SIGN CAT 1 EACH
2102 TRAFFIC SIGN CAT 2 EACH
2103 TRAFFIC SIGN CAT 3 (A, B, C) SM
2104 PAVEMENT MARKING NON-REFLECTING (CR) LIT
2105 PAVEMENT MARKING REFLECTING (CR) LIT
2108 TUNGSTEN CARBIDE BITS SET
2109 RED OXIDE PAINT LIT
2110 QUICK LIME KG
2111 DIESEL LIT
2112 SUPER LIT
2113 REGULAR LIT
2114 OILS (ALL TYPES) LIT
2115 LUBRICANTS (GREASE) KG
2116 FURNACE OIL LIT
2117 BLASTING MATERIAL KG
2118 ELECTRIC CHARGES COMMERCIAL KWH
2119 MASTIC WATER PROOF PAINT KG
2120 SYNTHETIC ENAMEL PAINT LIT
2121 SHUTTERING (401) A LS
2122 SHUTTERING (401) B LS
2123 SHUTTERING (401) C LS
2124 SHUTTERING (401) D LS
xiii
LIST OF MATERIAL
Material
Material Code Material Code
Code
2125 SHUTTERING (401) E LS
2126 SHUTTERING (401) F LS
2127 SHUTTERING (401) G LS
2128 SHUTTERING (401) H LS
2129 SHUTTERING (410) LS
2131 G.M.S BARBED WIRE KG
2133 ANGLE IRONS DIFFERENT SIZES KG
2134 STEEL CHANNELS KG
2135 SHEATHS (3/8", 1/2") M
2136 LIVE ANCHORAGES (3/8" - 1/2") EACH
2137 G.I. PIPE 3" DIA M
2140 G.M.S SCREW, NUTS, BOLTS AND WASHERS KG
2142 PLANTATION TREES EACH
2143 MOBILIZATION OF PILING EQUIPMENT LS
2144 RCC PIPE CLS-IV 310 MM (AASHTO M-170) M
2153 PAVEMENT MARKING NON REFLECTING (TP) KG
2154 PAVEMENT MARKING REFLECTING (TP) KG
2155 GALVANIZED FLAT STEEL FASTENERS & WASHERS KG
2156 GALVANIZED U-BOLT CLAMP WITH 2 NUTS & TIE BOLTS KG
GALVANIZED SUPPORTING HOOKS CAST IN PRECAST
2157 EACH
POSTS
2158 GALVANIZED CHAIN LINK WIRE MESH FABRIC SM
2159 GALVANIZED WIRE 3.76MM Ø TENSION, 3MM Ø STIRRUP KG
2160 PRE-CAST CONCRETE TUFF KERB STONE(K-5) EACH
2161 LIFTING DEVICE ANCHORS EACH
2162 MS SHEET KG
2163 FABRICATION KG
2164 GALVANIZATION KG
xiv
PLANT AND EQUIPMENT OWNING OPERATING COST SUMMARY

(CSR- Jan-2009)
T – Owning T- Operating T – Hourly

Equipment
Description Cost Cost O.W. &
Code
Operating Cost
3001 Bull-Dozer. 200 H.P 1,503.78 2,064.93 3,568.71
3002 Bull-Dozer. 120 H.P 973.02 1,011.88 1,984.90
3003 Bull-Dozer. 90 H.P 796.11 672.49 1,468.60
3004 Front End Loader. 3.00 Cu.M 1,457.39 1,558.64 3,016.03
3005 Front End Loader. 2.50 Cu.M 942.30 1,267.74 2,210.04
3006 Front End Loader. 1.50 Cu.M 854.12 1,044.74 1,898.86
3007 Grader. 165 H.P 1,210.40 1,411.34 2,621.74
3008 Grader. 140 H.P 857.12 1,117.67 1,974.79
3011 Tandem Vibratory Roller. 10-12 Ton 751.89 876.19 1,628.08
3012 Tandem Vibratory Roller. 8 Ton 692.91 766.50 1,459.41
3013 Tandem Vibratory Roller. 6 Ton 339.09 524.82 863.91
3014 Tandem Vibratory Roller. 1.5 Ton 240.30 281.56 521.86
3015 Combination Roller. 18 T 844.61 1,201.71 2,046.32
3016 Combination Roller 10 - 12 T 669.88 1,079.05 1,748.93
3017 Combination Roller 8 T 479.07 691.31 1,170.38
3018 P.T.R (9 - Wheeler) 21 T 405.57 941.13 1,346.70
3019 P.T.R (9 - Wheeler) 18 T 369.27 781.57 1,150.84
3020 Static Tandem Roller 12 T 140.07 488.28 628.35
3021 Static Tandem Roller 8T 117.93 486.84 604.77
3022 Tractor 80 H. P 62.95 591.82 654.77
3023 Tractor 50 H. P 37.56 376.62 414.18
3024 Water Tank Bowser Type 12000 Litre 240.49 618.21 858.70
3025 Water Tank Tow Type 4000 Litre 52.16 382.07 434.23
3031 Motor Scraper 400 H. P 1,449.78 5,135.17 6,584.95
3032 Dumper 18 T 288.03 1,084.37 1,372.40
3033 Dumper 10 T 230.44 693.31 923.75
3034 Flat Body Truck 8 T 177.69 513.95 691.64
3047 Excavator, (Track Type ) 100 H. P 825.60 727.34 1,552.94
3048 Power Broom 92.93 527.46 620.39
3051 Bitumen Distributor Tow Type 2000 Litre 155.67 414.85 570.52
3052 Bitumen Sprayer (Manual) 250 Litre 11.93 51.99 63.92
3053 Aggregate Spreader 4 M Wide 729.78 510.65 1,240.43
3054 Asphalt Plant 120 T 7,983.72 8,759.34 16,743.06
3055 Asphalt Plant 80 T 5,655.13 7,446.96 13,102.09
3056 Asphalt Plant. 40 Ton 4,657.19 4,114.85 8,772.04
xv

(CSR – Jan-2009)

Equipment
Code
Operating Cost
3057 Asphalt Plant. 20 Ton 3,326.57 3,151.87 6,478.44
3058 Paver 4 M Wide 729.78 1,109.56 1,839.34
3059 Paver 2.5 M Wide 501.27 990.82 1,492.09
3061 Compressor. 300 CFM 168.72 907.25 1,075.97
3062 Rock Driller 204.48 79.81 284.29
3071 Concrete Batching Plant. 30 CUM/H 554.97 2,499.29 3,054.26
3072 Concrete Static Mixer 1 Cu.Y 110.76 331.90 442.66
3073 Concrete Static Mixer 1/4 Cu.Y 25.56 221.24 246.80
3074 Concrete Transit Mixer 6 Cu.M 807.29 1,043.38 1,850.67
3075 Concrete Transit Mixer 4 Cu.M 754.19 752.33 1,506.52
3081 Trailer Low Bed 30 T. 506.66 1,000.71 1,507.37
3082 Crane. 45 T. 651.30 1,039.13 1,690.43
3083 Crane. 20 T. 564.69 849.55 1,414.24
3084 Cold Milling Machine. 1 M Width 1,765.58 1,265.48 3,031.06
3085 Road Marking Machine. 135.32 346.26 481.58
3086 Pump 4 " Delivery (Diesel) 43.50 262.48 305.98
3087 Pug mill 40 Tons per Hour. 746.27 2,381.43 3,127.70
3088 Chipping Spreader 3 Meter Wide 70.03 379.76 449.79
3089 Sand Blasting Machine 73.71 1,651.67 1,725.38
3120 Stressing Equipment 112.01 1,627.88 1,739.89
3121 Asphalt Cutter 47.14 321.07 368.21
3122 Concrete Cutter 47.14 321.07 368.21
3123 Electric Saw 21.30 810.84 832.14
3195 Truck (3-Axle) 248.42 668.52 916.94
3196 Tractor Trolley 94.15 445.65 539.80
3197 Trailer (30 Ton) 445.63 1,000.71 1,446.34
3198 Welding Plant 55.99 815.06 871.05
3199 Generator (Diesel) 150 KVA 214.62 1,365.49 1,580.11
3200 Generator (Diesel) 250 KVA 355.54 2,154.76 2,510.30
3202 Rock Crushing & Screening (200 T/H) 1,233.96 8,294.10 9,528.06
3205 Secondary Crusher 59.64 2,990.77 3,050.41
3206 Diesel Tanker 215.24 516.80 732.04
3208 Jack Hammer 33.60 304.09 337.69
3209 Pilling Rig (upto 1.5 m dia) 417.40 667.99 1,085.39
xvi

(CSR – Jan-2009)

Equipment
Code
Operating Cost
3209a Pilling Rig (above 1.5 m dia) 571.50 1,235.49 1,806.99
3210 Vibrator (Poker 1.5 ") 17.40 302.76 320.16
3211 Percussion Boring Rig 119.28 267.80 387.08
3212 Forgoing / Shape Machine 67.20 1,561.84 1,629.04
3214 Concrete Pump 621.60 1,170.56 1,792.16
3215 Plate Compactor 43.50 305.76 349.26
3217 Girder Launcher 1,464.46 1,034.77 2,499.23
3218 Tripod & Chain Pulley (20 Ton) 11.21 128.54 139.75
3219 Electric Generator 50 KVA 81.79 4,531.51 4,613.30
3220 Asphalt Recycling Machine 7,154.11 3,961.17 11,115.28
3221 Road Marking Machine (TP) 196.02 416.54 612.56
xvii
QUARRY SITES (NWFP)

Dist Code District Sites
AGGREGATES
35 Kohistan dasu Buttgram/ Mansehra area
7-B Buttgram Buttgram/ Mansehra area
43 Mansehra Margalla, Hawalian
73 Muzafarabad Margalla, Hawalian
1 Abbottabad Margallah, Dur Nala
20-B Haripur Hazara Margallah, Dur Nala
10 Chitral Chitral Area, Swat Area
15 Dir Swat Area, Quarry Available no crusher
66 Swat Saidu Sharif Chakdara, Swat Area
66-B Kalam Chakdara, Swat Area
7-A Buneer Swat Area
42 Malakand chakdara, Swat area
10-A Charsaddah Charsad Area, Mardan, Dara Adam Khel
44 Mardan Katlung, Charsada
66-A Swabi Margallah, Katlung
49-C Nowshera Katlung (Nowshera), Margallah
52 Peshawar Charsada, charat, Khyber pass, Adam Khel
34 Kohat Kohat Area, Dara Adam Khel
27 Karak Kohat Area
6 Bannu Kohat, Eisa Khel
41-B Lucky Murwat Kohat, Eisa Khel
70-A Tank Daraban Crushers
12 Dera Ismail Khan Daraban Crushers, Chund quarry
CRUSHED AGGREGATE BASE
35 Kohistan dasu Chillas, Jalkot, Buttgram/ Mansehra area
1 Abbottabad Abbotabad Area, Dor Nala
10 Chitral Shishi Bridge, Chitral Area
xviii
QUARRY SITES (NWFP)


49-C Nowshera Nowshera area, Mardan Area
34 Kohat Dara Adam Khel, Darsamand
27 Karak Kohat
6 Bannu Kurram, Bannu area
41-B Lucky Murwat Bannu area
70-A Tank Eisa Khel, Zam Nala, Pezu, Daraban
12 Dera Ismail Khan Daraban
GRANULAR SUB-BASE
35 Kohistan dasu Pattan, Chillas, Jalkot, Buttgram
7-B Buttgram Dor Nallah, Patan
43 Mansehra Dor Nullah, Katha Nullah, Icher Nala
73 Muzafarabad Dor Nullah, Katha Nullah, Icher Nala
1 Abbottabad Dor nullah
20-B Haripur Hazara Dor Nullah
10 Chitral Shishi Bridge, Chitral Area
15 Dir Maiar Nala, Punjkot River
66 Swat Saidu Sharif Swat river
66-B Kalam Swat river
42 Malakand Wartir Nala, Heru Shah Quary
66-A Swabi Margallah
49-C Nowshera Nowshera, Mardan Area
52 Peshawar Balu Nala, GandiahNala Dheri Kati Khel Nala
34 Kohat Kohat area
27 Karak Pezu, Chokara, Tri Nala, Tironky nala
6 Bannu Kurram River, Pizu
41-B Lucky Murwat Pezu area
70-A Tank DI Khan Area
12 Dera Ismail Khan Daraban, Zam, Pirkuch Nala, Chund Quarry
xix
QUARRY SITES (NWFP)

FILLER MATERIAL
35 Kohistan dasu Buttgram/ Mansehra area
1 Abbottabad Dur Nala
10 Chitral Chitral Area, Swat Area
49-C Nowshera Katlung (Nowshera), Margallah
34 Kohat Kohat Area, Dara Adam Khel
27 Karak Kohat Area
6 Bannu Kohat, Eisa Khel
41-B Lucky Murwat Kohat, Eisa Khel
70-A Tank Daraban Crushers
12 Dera Ismail Khan Daraban Crushers, Chund quarry
xx
Quantities of Material for Bituminous Surface Treatments
Surface Treatment Aggregate Bituminous Material
Type Application Size Quantity Quantity Type

No. Kg/ Sq.M Litres/ Sq.M
1.19 (a)
Single Single 2 12.5
1.63 (b)
1.9 (a)
First 1 24
2.14 (b)
Double
1.19 (a)
Second 3 12.5
1.63 (b)
1.9 (a)
First 1 24
2.14 (b)
Triple 1.19 (a)
Second 2 12.5
1.63 (b)
Third 3 6.5 0.68 (c)
Seal Coat / Pad
Coat with 4 4 0.5 (c)
Aggregate
Over Sub grade, Sub base , WBM or
0.65 ~ 1.75 (b)
Aggregate base
Prime Coat
Over Bridge, wearing surface. Concrete
0.15 ~ 0.4 (b)
pavement
Over Previously laid asphaltic layer 0.2 ~ 0.4 Cut-back
Tack Coat
Emulsified
Over Previously laid asphaltic layer 0.3 ~ 0.6
asphalt
Over prime or tack As per NHA / Grade 40/50,
Asphaltic Base 3% (Min.)
coated surface Project Spec's 60/70, 80/100
Asphaltic Over tack coated As per NHA / Grade 40/50,
3.5% (Min.)
Wearing Coarse surface Project Spec's 60/70, 80/100
Note:
(i) Bituminous material types are (a) asphalt cement, (b) cut-back or
emulsified and (c) asphalt cement, cut-back and emulsified
xxi
Portland Cement Concrete Requirements
Class of Min. Cement Max. Size 28 Days Compressive Consistency Maximum

Concrete Kg/ Cubic of Coarse Strength (Min) (Cylinder) (Range in Slump) Permissible
Meter Aggregate Water - Cement
(mm) (Kg/Sq. (Psi) Vibrated Ratio
Cm) (mm)
A1 300 20 210 3000 25 - 75 0.58
A2 350 25 245 3500 100 - 150 0.58
A3 400 38 280 4000 100 - 150 0.58
B 250 51 170 2450 25 - 75 0.65
C 275 38 210 3000 25 - 75 0.58
D1 450 25 350 5000 50 - 100 0.40
D2 500 25 425 6000 50 - 100 0.40
D3 550 25 500 7100 50 - 100 0.40
Y 400 13 210 3000 25 - 75 0.58
Lean
175 51 100 1420 – –
Concrete
Cement Bags per Unit Quantity
Qty of Cement
Sr. No Description Unit in Bag of 50
Kg
1 Burnt brickwork in Cement Mortar (1:6) CM 2.10

2 Burnt brickwork in Cement Mortar (1:3) CM 2.79
3 Pointing brickwork (flush) in Cement Mortar (1:3) SM 0.018
7 Random rubble masonry in Cement Mortar (1:4) CM 1.960
8 Pointing in Cement Mortar (1:3) flush to stone masonry SM 0.063
9 Pointing in Cement Mortar (1:4) flush to stone masonry SM 0.050
10 13 mm thick cement plaster (1:4) SM 0.14
xxii
CONVERSION FACTORS
To Convert Into Multiply By
Length
Inch Millimetre 25.4
Millimetre Inch 0.03937
Foot Metre 0.30480
Metre Foot 3.28084
Yard Metre 0.91440
Metre Yard 1.09361
Mile Kilometre 1.60934
Kilometre Mile 0.62137
Mass. Weight
Pound Kilogram 0.45359237
Kilogram Pound 2.20462
Ounce Gram 28.3495
Gram Ounce 0.03527
Quintal Kilogram 100
Grain Milligram 64.7989
Hundred Weight Kilogram 50.8023
Tonne Hundred Weight 19.6841
Tonne Kilogram 1000
Ton Kilogram 1016.0469
Ton Pound 2240
Ton Tonne 1.0160469
Tonne Ton 0.9842065
Seer Kilogram 0.9331
Maund Kilogram 37.324
Tola Gram 11.664
Capacity Volume
Pint (UK) Litre 0.568261
Gallon (Imperial) Litre 4.54609
Cubic foot Litre 28.3168
Cubic metre Litre 1000
Litre Cubic foot 0.0353147
Fluid ounce Millilitre 28.413
Litre Gallon (Imperial) 0.219969
Cubic inch Cubic millimetre 16387.1
Cubic foot Cubic metre 0.0283168
Cubic metre Cubic foot 35.3147
Cubic yard Cubic metre 0.764555
Cubic metre Cubic yard 1.30795
Acre foot Hectare metre 0.12334
Weights & Standard Sizes of Sheets
Birmingham Gauge Thickness in mm Kg Per Sqm
28 0.40 3.15
26 0.50 3.90
24 0.63 4.95
22 0.80 6.30
20 1.00 7.85
18 1.25 9.80
16 1.60 12.75
14 2.00 15.70
12 2.50 19.60
10 3.15 24.75
8 4.00 31.40
xxiii
To Convert Into Multiply
Area
Square inch Square millimetre 645.16

Square millimetre Square inch 0.00155
Square foot Square metre 0.0929
Square metre Square foot 10.7639
Square yard Square metre 0.836127
Square metre Square yard 1.19599
Acre Square metre 4046.8564
Acre Hectare 0.40468564
Hectare Acre 2.47105
Hectare Square metre 10000
Square mile Square kilometre 2.58999
Square kilometre Square mile 0.386102
Square mile Hectare 258.999
Hectare Square mile 0.00386102
Mass Per Unit Area
Ton per square mile Kilogram per square kilometre 392.298

Pound per square foot Kilogram per square metre 4.88243
Kilogram per square metre Pound per square foot 0.204816
Mass Per Unit Volume
Ton per cubic foot Kilogram per cubic metre 16.0185

Pound per cubic foot Grams per litre 16.0185
Kilogram per cubic metre Pound per cubic foot 0.062428
Grams per litre Pound per cubic foot 0.062428
The weight of Mild Steel and Ribbed Tor Steel bars
Sectional area in Square Weight in Kilogram

Dia in Millimetre
Centimetre Per Metre
6 0.283 0.222
8 0.502 0.395
10 0.785 0.617
12 1.131 0.888
16 2.011 1.578
18 2.545 2.000
22 3.801 2.980
25 4.909 3.854
28 6.157 4.830
32 8.042 6.313
35 10.179 7.990
40 12.566 9.864
50 19.635 15.410
xxiv
NATIONAL HIGHWAY AUTHORITY

January - 2009
N.W.F.P.
Shabir Associates
Page 1
.
Page 2
CSR - January 2009
Islamabad Quantity Survying & Construction Cost Consultants
LIST OF DISTRICTS (NWFP)

Sr. No. Name of District Code Page
1 Abbottabad 01 5
2 Bannu 06 15
3 Buneer 07-A 25
4 Buttgram 07-B 35
5 Chitral 10 45
6 Charsaddah 10-A 55
7 Dera Ismail Khan 12 65
8 Dir 15 75
9 Haripur Hazara 20-B 85
10 Karak 27 95
11 Kohat 34 105
12 Kohistan Dasu 35 115
13 Lucky Murwat 41-B 125
14 Malakand 42 135
15 Mansehra 43 145
16 Mardan 44 155
17 Nowshera 49-C 165
18 Peshawar 52 175
19 Swat Saidu Sharif 66 185
20 Swabi 66-A 195
21 Tank 70-A 205
.
Page 4

January - 2009
ABBOTTABAD
(01)
Shabir Associates
Page 5
.
Page 6
CSR - January 2009
National Highway Authority Construction Shabir Associates
District: Abbottabad
Abbottabad District Code: 01
CODE DESCRIPTION UNIT MANPOWER EQUIPMENT MATERIAL OH-PROFIT RATE
101 CLEARING AND GRUBBING SM 0.73 10.10 - 2.71 13.54
102a REMOVAL OF TREES 150 - 300 mm GIRTH EACH 7.72 173.32 1.17 45.55 227.76
102b REMOVAL OF TREES 301 - 600 mm GIRTH EACH 21.50 456.54 2.63 120.17 600.84
102c REMOVAL OF TREES 601 mm OR OVER GIRTH EACH 86.01 1,826.16 10.51 480.67 2,403.35
103 STRIPPING CM 2.75 93.22 - 23.99 119.96
104 COMPACTION OF NATURAL GROUND SM 0.40 9.91 0.76 2.77 13.84
106a EXCAVATE UNSUITABLE COMMON MATERIAL CM 5.65 135.76 - 35.35 176.76
106bi EXCAVATE UNSUITABLE HARD ROCK MATERIAL CM 141.76 316.30 50.82 127.22 636.10
106bii EXCAVATE UNSUITABLE MEDIUM ROCK MATERIAL CM 18.27 337.99 - 89.07 445.33
106biii EXCAVATE UNSUITABLE SOFT ROCK MATERIAL CM 12.03 262.40 - 68.61 343.03
106c EXCAVATE SURPLUS COMMON MATERIAL CM 4.62 120.27 - 31.22 156.11
106di EXCAVATE SURPLUS HARD ROCK MATERIAL CM 141.76 316.30 50.82 127.22 636.10
106dii EXCAVATE SURPLUS MEDIUM ROCK MATERIAL CM 22.64 316.03 - 84.67 423.34
106diii EXCAVATE SURPLUS SOFT ROCK MATERIAL CM 9.25 263.92 - 68.29 341.47
107a STRUCTURAL EXCAVATION IN COMMON MATERIAL CM 8.58 137.60 0.38 36.64 183.20
107b STRUCTURAL EXCAVATION IN COMMON MATERIAL BELOW CM 66.41 287.11 70.80 106.08 530.42
WATER LEVEL
107ci STRUCTURAL EXCAVATION IN HARD ROCK MATERIAL CM 125.77 427.01 33.88 146.67 733.33
107cii STRUCTURAL EXCAVATION IN MEDIUM ROCK MATERIAL CM 105.22 292.53 - 99.44 497.20
107ciii STRUCTURAL EXCAVATION IN SOFT ROCK MATERIAL CM 64.68 238.86 - 75.89 379.43
107d GRANULAR BACK FILL CM 37.04 137.14 415.39 147.39 736.96
107e COMMON BACK FILL CM 25.46 62.84 5.09 23.35 116.74
108a FORMATION OF EMBANKMENT FROM ROADWAY CM 7.56 174.71 5.09 46.84 234.20
EXCAVATION IN COMMON MATERIAL
108bi FORMATION OF EMBANKMENT FROM ROADWAY CM 21.72 482.48 54.04 139.56 697.80
EXCAVATION IN HARD ROCK MATERIAL
108bii FORMATION OF EMBANKMENT FROM ROADWAY CM 16.29 416.71 2.42 108.85 544.27
EXCAVATION IN MEDIUM ROCK MATERIAL
108biii FORMATION OF EMBANKMENT FROM ROADWAY CM 14.48 369.34 - 95.96 479.78

EXCAVATION IN SOFT ROCK MATERIAL
108c FORMATION OF EMBANKMENT FROM BORROW CM 8.48 177.46 7.94 48.47 242.35
108d FORMATION OF EMBANKMENT FROM STRUCTURAL CM 6.77 76.32 5.09 22.04 110.22
108e FORMATION OF EMBANKMENT FROM STRUCTURAL CM 15.36 110.29 3.03 32.17 160.84
EXCAVATION IN ANY TYPE OF ROCK MATERIAL
109a SUB GRADE PREPARATION IN EARTH CUT SM 1.54 27.34 1.46 7.58 37.91
Page 7
CSR - January 2009
109bi SUB GRADE PREPARATION IN EXISTING ROAD WITHOUT SM 1.13 18.21 0.77 5.03 25.14
ANY FILL
110 IMPROVED SUB-GRADE CM 10.80 120.02 52.42 45.81 229.05
114a DRESSING OF BERM WITHOUT EXTRA MATERIAL SM 0.92 15.26 0.79 4.24 21.22
114b DRESSING OF BERM WITH EXTRA BORROW MATERIAL SM 1.34 15.57 0.90 4.45 22.26
201 GRANULAR SUB-BASE CM 8.66 255.06 496.38 190.02 950.12
202 AGGREGATE BASE CM 10.54 326.54 728.09 266.29 1,331.46
203a ASPHALTIC BASE COURSE PLANT MIX (CLASS "A") CM 72.70 1,510.17 5,779.15 1,840.50 9,202.52
203b ASPHALTIC BASE COURSE PLANT MIX (CLASS "B") CM 75.56 1,510.17 6,199.49 1,946.30 9,731.52
203c ASPHALTIC LEVELLING COURSE PLANT MIX (CLASS "A") CM 80.83 1,577.28 5,769.58 1,856.92 9,284.62
203d ASPHALTIC LEVELLING COURSE PLANT MIX (CLASS "B") CM 80.83 1,571.31 6,342.09 1,998.56 9,992.79
204b CEMENT STABILIZED BASE CM 31.56 569.10 956.14 389.20 1,946.00
204d LIQUID ASPHALT FOR CURING SEAL, TYPE MC-250 TON 269.62 915.38 50,538.21 12,930.80 64,654.01
204e EMULSIFIED ASPHALT FOR CURING SEAL, TYPE SS-1 TON 269.62 915.38 48,960.08 12,536.27 62,681.35
205a GRADED CRUSHED AGGREGATE CRACK-RELIEF LAYER CM 91.61 112.80 966.30 292.68 1,463.38
205b ASPHALTIC OPEN-GRADED PLANT MIX CRACK-RELIEF CM 152.82 2,437.94 5,563.63 2,038.60 10,192.99
LAYER
206b WATER BOUND MACADAM BASE WITH COARSE CM 100.25 126.27 777.24 250.94 1,254.71
AGGREGATE CLASS B
207a DEEP PATCHING (0-15 cm) SM 1.90 45.04 1.26 12.05 60.24
207b DEEP PATCHING (16-30 cm) SM 1.90 39.67 1.26 10.71 53.53
208 REINSTATEMENT OF ROAD SURFACE SM 2.09 57.10 0.56 14.94 74.69
209a BREAKING OF EXISTING ROAD PAVEMENT STRUCTURE CM 2.50 110.61 0.68 28.45 142.23
209b SCARIFICATION OF EXISTING ROAD PAVEMENT SM 0.50 22.12 0.14 5.69 28.45
302a CUT-BACK ASPHALT FOR BITUMINOUS PRIME COAT SM 0.33 1.57 35.87 9.44 47.22
302b EMULSIFIED ASPHALT FOR BITUMINOUS PRIME COAT SM 0.32 1.57 40.04 10.48 52.42
303a CUT-BACK ASPHALT FOR BITUMINOUS TACK COAT SM 0.13 0.58 15.01 3.93 19.66
303b EMULSIFIED ASPHALT FOR BITUMINOUS TACK COAT SM 0.13 0.58 17.51 4.56 22.78
304a SINGLE SURFACE TREATMENT SM 0.88 7.57 71.25 19.92 99.62
304b DOUBLE SURFACE TREATMENT SM 1.27 14.15 138.38 38.45 192.24
304c TRIPLE SURFACE TREATMENT SM 2.14 19.94 157.82 44.97 224.87
304d SEAL COAT SM 0.82 4.12 50.15 13.77 68.87
Page 8
CSR - January 2009
305a ASPHALTIC CONCRETE FOR WEARING COURSE (CLASS CM 69.52 1,489.33 6,772.24 2,082.77 10,413.86
"A")
305b ASPHALTIC CONCRETE FOR WEARING COURSE (CLASS CM 69.52 1,438.23 7,296.26 2,201.00 11,005.01
"B")
307a DENSE GRADED HOT BIT-MAC CM 167.81 379.77 5,555.86 1,525.86 7,629.31
307b OPEN GRADED HOT BIT-MAC CM 167.81 379.77 5,441.58 1,497.29 7,486.45
308a RECYCLING OF ASPHALT CONCRETE (0 - 60 mm THICK) CM 29.24 590.65 2,021.86 660.44 3,302.18
308b BITUMEN BINDER GRADE (40 - 50, 60 - 70, 80 - 100) TON 29.19 650.70 42,543.28 10,805.79 54,028.96
309a COLD MILLING, 0 - 30 mm SM 1.07 24.99 8.68 8.69 43.43
309b COLD MILLING, 0 - 50 mm SM 1.79 41.65 14.46 14.48 72.38
309c COLD MILLING, 0 - 70 mm SM 2.68 62.48 21.69 21.71 108.56
401a1i CONCRETE CLASS "A1" (Underground) CM 544.84 1,059.94 3,946.83 1,387.90 6,939.52
401a1ii CONCRETE CLASS "A1" (On ground) CM 544.84 1,059.94 4,224.31 1,457.27 7,286.36
401a1iii CONCRETE CLASS "A1" (Elevated) CM 544.84 1,059.94 4,779.25 1,596.01 7,980.04
401b CONCRETE CLASS "B" CM 719.81 805.93 3,249.38 1,193.78 5,968.90
401ci CONCRETE CLASS "C" (Underground) CM 531.99 500.55 3,544.96 1,144.37 5,721.87
401cii CONCRETE CLASS "C" (On ground) CM 531.99 500.55 3,663.30 1,173.96 5,869.80
401ciii CONCRETE CLASS "C" (Elevated) CM 531.99 500.55 3,899.98 1,233.13 6,165.66
401d CONCRETE CLASS "D1" CM 830.79 1,265.57 5,295.34 1,847.93 9,239.63
401e CONCRETE CLASS "Y" CM 1,144.74 500.55 4,712.45 1,589.44 7,947.18
401f LEAN CONCRETE CM 446.13 507.52 2,520.49 868.53 4,342.66
401gi(1) PRECAST CONCRETE CLASS "A-1" CM 1,788.08 947.15 4,942.49 1,919.43 9,597.14
401gii PRECAST CONCRETE CLASS "B" CM 1,788.08 947.15 4,778.84 1,878.52 9,392.59
401giii(1) PRECAST CONCRETE CLASS "D1" CM 1,788.08 947.15 6,076.49 2,202.93 11,014.64
Page 9
CSR - January 2009
404a REINFORCEMENT AS PER AASHTO M. 31 GRADE 40 TON 1,649.89 781.47 59,888.00 15,579.84 77,899.20
404b REINFORCEMENT AS PER AASHTO M. 31 GRADE 60 TON 1,649.89 781.47 67,238.00 17,417.34 87,086.70
404h REINFORCEMENT (STRUCTURAL SHAPES) AS PER ASTM-A- TON 1,311.27 5,393.81 56,007.02 15,678.02 78,390.12
36
405a PRE-STRESSING WIRE STRAND 3/8" - 1/2" DIA COMPLETE IN TON 2,816.57 15,659.05 133,860.36 38,083.99 190,419.97
ALL RESPECT
405b LAUNCHING OF GIRDER TON 65.06 532.52 - 149.40 746.98
406a PREMOULDED JOINT FILLER 12 mm THICK WITH SM 115.67 - 301.01 104.17 520.85
BITUMASTIC JOINT SEAL
406b NEOPRENE RUBBER JOINT FILLER 12 mm THICK WITH SM 115.67 - 307.07 105.68 528.42
406c STEEL EXPANSION JOINTS KG 9.48 26.40 90.86 31.68 158.42
406d WATER STOPS 6" SIZE M 98.99 - 472.28 142.82 714.08
406e ELASTOMERIC BEARING PADS (ACCORDING TO SIZE AND ccm 0.02 - 2.12 0.53 2.67
THICKNESS)
406f ASPHALT FELT (3 PLY) SM 45.65 - 2,960.09 751.43 3,757.17
406g STEEL OR METAL BEARING DEVICES KG 20.82 69.68 117.77 52.07 260.34
407d1 CAST IN PLACE CONCRETE PILES UP TO 0.76 M DIA M 355.84 1,654.04 899.75 727.41 3,637.04
(BORING ONLY) IN NORMAL SOIL
407d2 CAST IN PLACE CONCRETE PILES UP TO 0.76 M DIA M 533.76 2,481.06 1,349.62 1,091.11 5,455.56
(BORING ONLY) IN GRAVEL STRATA
407d3 CAST IN PLACE CONCRETE PILES 0.80 - 1.4 M DIA (BORING M 533.76 2,481.06 997.52 1,003.09 5,015.44
ONLY) IN NORMAL SOIL
407d4 CAST IN PLACE CONCRETE PILES 0.80 - 1.4 M DIA (BORING M 889.61 4,135.11 1,174.50 1,549.80 7,749.02
ONLY) IN GRAVEL STRATA
407d5 CAST IN PLACE CONCRETE PILES 1.5 -2.0 M DIA (BORING M 762.52 4,884.94 1,354.70 1,750.54 8,752.70
407d6 CAST IN PLACE CONCRETE PILES 1.5 -2.0 M DIA (BORING M 1,334.41 6,909.78 1,487.23 2,432.86 12,164.28
ONLY) IN GRAVEL SOIL
407h PILE LOAD TEST UP TO 120 TON EACH 22,545.15 45,769.30 100,542.38 42,214.21 211,071.05
407i PILE LOAD TEST UP TO 240 TON EACH 41,156.52 45,769.30 201,084.76 72,002.65 360,013.23
407j PILE LOAD TEST UP TO 360 TON EACH 59,767.89 50,188.38 301,627.14 102,895.85 514,479.27
407k CONFIRMATORY BORING (NX SIZE) M 194.25 1,582.02 6.37 445.66 2,228.30
410 BRICK WORK CM 356.73 282.72 3,076.60 929.01 4,645.06
411a STONE MASONRY RANDOM DRY CM 299.85 107.96 562.16 242.49 1,212.46
411b STONE MASONRY RANDOM WITH MORTAR CM 324.74 166.68 1,635.48 531.73 2,658.64
411c STONE MASONRY DRESSED UNCOURSED DRY CM 391.00 107.96 625.28 281.06 1,405.29
411d STONE MASONRY DRESSED UNCOURSED WITH MORTAR CM 461.46 166.68 1,697.90 581.51 2,907.55
Page 10
CSR - January 2009
411g ROLL POINTING SM 76.19 11.74 44.53 33.12 165.59
412a STONE MASONRY DRESSED COURSED WITH MORTAR CM 618.85 264.08 1,603.09 621.51 3,107.53
501a R.C.C PIPE CULVERT AASHTO M 170 CLASS II DIA 310 mm M 229.85 437.48 644.86 328.05 1,640.25
501b R.C.C PIPE CULVERT AASHTO M 170 CLASS II DIA 380 mm M 221.88 577.19 835.93 408.75 2,043.75
501c R.C.C PIPE CULVERT AASHTO M 170 CLASS II DIA 460 mm M 221.73 935.96 1,071.91 557.40 2,787.00
501d R.C.C PIPE CULVERT AASHTO M 170 CLASS II DIA 610 mm M 229.77 1,146.39 1,600.63 744.20 3,720.99
501e R.C.C PIPE CULVERT AASHTO M 170 CLASS II DIA 760 mm M 264.84 1,078.41 2,300.27 910.88 4,554.41
501f R.C.C PIPE CULVERT AASHTO M 170 CLASS II DIA 910 mm M 330.10 1,331.30 3,618.01 1,319.85 6,599.26
501g R.C.C PIPE CULVERT AASHTO M 170 CLASS II DIA 1070 mm M 427.18 1,481.41 4,683.95 1,648.14 8,240.68
501h R.C.C PIPE CULVERT AASHTO M 170 CLASS II DIA 1220 mm M 500.94 1,798.85 5,968.88 2,067.17 10,335.84
501i R.C.C PIPE CULVERT AASHTO M 170 CLASS II DIA 1520 mm M 596.65 2,098.66 9,218.85 2,978.54 14,892.70
501j R.C.C PIPE CULVERT AASHTO M 170 CLASS IV DIA 310 mm M 229.85 507.33 725.04 365.56 1,827.78
501k R.C.C PIPE CULVERT AASHTO M 170 CLASS IV DIA 380 mm M 221.88 577.19 854.75 413.46 2,067.28
501l R.C.C PIPE CULVERT AASHTO M 170 CLASS IV DIA 460 mm M 216.61 935.96 1,046.49 549.77 2,748.83
501m R.C.C PIPE CULVERT AASHTO M 170 CLASS IV DIA 610 mm M 229.77 1,146.39 1,745.56 780.43 3,902.15
501n R.C.C PIPE CULVERT AASHTO M 170 CLASS IV DIA 760 mm M 264.84 1,078.41 3,318.70 1,165.49 5,827.45
501o R.C.C PIPE CULVERT AASHTO M 170 CLASS IV DIA 910 mm M 330.10 1,331.30 4,875.32 1,634.18 8,170.90
501p R.C.C PIPE CULVERT AASHTO M 170 CLASS IV DIA 1070 mm M 427.18 1,481.41 6,812.38 2,180.24 10,901.22
501q R.C.C PIPE CULVERT AASHTO M 170 CLASS IV DIA 1220 mm M 500.94 1,798.85 9,239.15 2,884.74 14,423.68
501r R.C.C PIPE CULVERT AASHTO M 170 CLASS IV DIA 1520 mm M 596.65 2,098.66 12,997.71 3,923.26 19,616.28
502a GRANULAR MATERIAL IN BED TO CONCRETE PIPE CM 93.70 118.93 428.06 160.17 800.85
CULVERT
502b CONCRETE CLASS "B" IN BEDDING AND ENCASEMENT OF CM 800.63 612.95 3,599.38 1,253.24 6,266.20
CONCRETE PIPE CULVERT
507a STEEL WIRE MESH FOR GABIONS KG 5.67 - 109.50 28.79 143.96
507b ROCK FILL IN GABIONS CM 96.86 - 388.21 121.27 606.34
508a BRICK PAVING (SINGLE COURSE) SM 115.45 32.70 246.96 98.78 493.88
508b BRICK PAVING (DOUBLE COURSE) SM 206.59 32.70 490.14 182.36 911.78
509a RIP RAP CLASS "A" CM 506.56 - 467.35 243.48 1,217.38
509b RIP RAP CLASS "B" CM 486.43 - 463.61 237.51 1,187.55
509c RIP RAP CLASS "C" CM 489.61 - 467.35 239.24 1,196.20
Page 11
CSR - January 2009
509d GROUTED RIP RAP CLASS "A" CM 616.99 102.14 1,889.70 652.21 3,261.04
509e GROUTED RIP RAP CLASS "B" CM 594.69 81.72 1,738.21 603.65 3,018.27
509f GROUTED RIP RAP CLASS "C" CM 586.72 68.10 1,784.62 609.86 3,049.29
509g REINFORCED CONCRETE SLOPE PROTECTION (WITHOUT CM 816.75 353.02 4,161.87 1,332.91 6,664.55
REINFORCEMENT)
509h FILTER LAYER OF GRANULAR MATERIAL CM 47.66 191.97 415.94 163.90 819.48
510 DISMANTLING OF STRUCTURE AND OBSTRUCTIONS CM 107.69 390.69 - 124.60 622.98
511a1 DRY STONE PITCHING (15-20 cm Thick) SM 159.31 67.48 75.94 75.68 378.41
511b1 GROUTED STONE PITCHING (15-20 cm Thick) SM 260.29 180.32 374.87 203.87 1,019.34
601ai CONCRETE KERB IN PLACE NEW JERSY BARRIER FOR M 288.84 572.25 2,210.98 768.02 3,840.08
MEDIAN (DOUBLE FACE)
601di PRECAST REINFORCED CONCRETE KERB NEW JERSY M 982.88 670.54 4,055.33 1,427.18 7,135.92
BARRIER FOR MEDIAN (DOUBLE FACE)
601dii PRECAST KERB IN CONCRETE CLASS A-1 OF SIZE 450 X 150 MM M 143.14 90.27 430.28 165.92 829.61
INCLUDING CONCRETE BEDDING & HAUNCHING
603 BRICK EDGING M 9.22 - 38.88 12.03 60.13
604a METAL GUARD RAIL M 19.85 70.84 1,579.36 417.51 2,087.56
604b METAL GUARD RAIL END PIECES EACH 25.20 - 1,197.58 305.69 1,528.47
604d STEEL POST OF METAL GUARD RAIL EACH 95.54 976.73 3,776.31 1,212.14 6,060.72
605a CONCRETE BEAM GUARD RAIL M 74.55 30.82 590.23 173.90 869.50
605c CONCRETE POST FOR GUARD RAIL M 91.53 27.36 590.14 177.26 886.29
607a TRAFFIC ROAD SIGN CATEGORY 1 EACH 240.49 255.15 6,856.68 1,838.08 9,190.40
607b TRAFFIC ROAD SIGN CATEGORY 2 EACH 70.70 382.72 9,258.32 2,427.94 12,139.68
607c TRAFFIC ROAD SIGN CATEGORY 3 (a) EACH 240.49 541.89 11,887.89 3,167.57 15,837.83
607d TRAFFIC ROAD SIGN CATEGORY 3 (b) EACH 754.41 598.64 20,957.75 5,577.70 27,888.50
607e TRAFFIC ROAD SIGN CATEGORY 3 (c) SM 150.88 119.73 9,209.53 2,370.04 11,850.18
607f ADDITIONAL PANEL SIZE 60 X 30 cm EACH 316.33 - 1,303.23 404.89 2,024.46
607g ADDITIONAL PANEL SIZE 90 X 30 cm EACH 316.33 - 1,954.85 567.80 2,838.98
608b1 PAVEMENT MARKING IN NON-REFLECTIVE CR PAINT FOR M 2.83 5.86 16.16 6.21 31.07
LINES OF 15 cm WIDTH
608b2 PAVEMENT MARKING IN NON-REFLECTIVE TP PAINT FOR M 0.94 4.03 39.66 11.16 55.79
608c1 PAVEMENT MARKING IN NON-REFLECTIVE CR PAINT FOR M 2.83 5.86 21.57 7.56 37.82
Page 12
CSR - January 2009
608c2 PAVEMENT MARKING IN NON-REFLECTIVE TP PAINT FOR M 0.94 4.03 52.89 14.47 72.33
608d1 PAVEMENT MARKING IN NON-REFLECTIVE CR PAINT FOR EACH 76.53 5.22 156.16 59.48 297.39
4.0 M ARROWS
608d2 PAVEMENT MARKING IN NON-REFLECTIVE TP PAINT FOR 4.0 EACH 76.53 9.98 499.74 146.56 732.82
M ARROWS
608h1 PAVEMENT MARKING IN REFLECTIVE CR PAINT FOR LINES M 3.54 8.59 22.48 8.65 43.26
OF 15 cm WIDTH
608h2 PAVEMENT MARKING IN REFLECTIVE TP PAINT FOR LINES M 3.54 9.63 67.50 20.17 100.85
OF 15 cm WIDTH
608i1 PAVEMENT MARKING IN REFLECTIVE CR PAINT FOR LINES M 3.54 6.95 29.97 10.12 50.58
OF 20 cm WIDTH
608i2 PAVEMENT MARKING IN REFLECTIVE TP PAINT FOR LINES M 3.54 9.63 90.01 25.79 128.97
OF 20 cm WIDTH
608j1 PAVEMENT MARKING IN REFLECTIVE CR PAINT FOR 4.0 M EACH 76.53 3.73 217.02 74.32 371.60
ARROWS
608j2 PAVEMENT MARKING IN REFLECTIVE TP PAINT FOR 4.0 M EACH 76.53 7.90 851.20 233.91 1,169.53
ARROWS
608n1 PAVEMENT MARKING IN NON-REFLECTIVE CR PAINT FOR EACH 63.89 3.73 104.11 42.93 214.66
STOP
608n2 PAVEMENT MARKING IN NON-REFLECTIVE TP PAINT FOR EACH 63.89 7.90 333.67 101.36 506.82
STOP
608n3 PAVEMENT MARKING IN REFLECTIVE CR PAINT FOR STOP EACH 63.89 3.73 144.68 53.07 265.37
608n4 PAVEMENT MARKING IN REFLECTIVE TP PAINT FOR STOP EACH 63.89 7.90 568.32 160.03 800.14
609c REFLECTORIZED PAVEMENT STUD (RAISED PROFILE TYPE - EACH 9.41 81.62 193.86 71.22 356.11
SINGLE)
609d REFLECTORIZED PAVEMENT STUD (RAISED PROFILE TYPE - EACH 9.41 81.62 233.86 81.22 406.10
DOUBLE)
610b RIGHT OF WAY MARKER EACH 102.51 121.33 299.32 130.79 653.95
610c KILOMETRE POST (0.610 X 0.114 X 1.5 M) EACH 640.99 976.31 2,009.70 906.75 4,533.75
610d TEN KILOMETRE POST EACH 1,224.53 1,952.61 4,414.31 1,897.86 9,489.32
611a CHAIN LINK WIRE FABRIC FENCING 1500 MM HEIGHT M 135.53 91.00 952.71 294.81 1,474.05
WITH PRECAST PRESTRESSED R.C.C. POST
Page 13
.
Page 14

January - 2009
BANNU
(06)
Shabir Associates
Page 15
.
Page 16
CSR - January 2009
District: Bannu
Bannu District Code: 06
103 STRIPPING CM 2.37 93.22 - 23.90 119.49
WATER LEVEL

Page 17
CSR - January 2009
District: Bannu
ANY FILL
204b CEMENT STABILIZED BASE CM 26.94 569.10 1,007.07 400.78 2,003.89
205a GRADED CRUSHED AGGREGATE CRACK-RELIEF LAYER CM 76.02 112.80 1,020.83 302.41 1,512.06
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.68 4.12 54.25 14.76 73.81
Page 18
CSR - January 2009
District: Bannu
"A")
"B")
401e CONCRETE CLASS "Y" CM 968.35 500.55 4,779.57 1,562.12 7,810.59
Page 19
CSR - January 2009
District: Bannu
36
ALL RESPECT
THICKNESS)
410 BRICK WORK CM 314.26 282.72 3,081.68 919.66 4,598.32
Page 20
CSR - January 2009
District: Bannu
CULVERT
Page 21
CSR - January 2009
District: Bannu
REINFORCEMENT)
511b1 GROUTED STONE PITCHING (15-20 cm Thick) SM 228.82 180.32 374.93 196.02 980.10
603 BRICK EDGING M 8.02 - 38.40 11.61 58.03
Page 22
CSR - January 2009
District: Bannu
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
610d TEN KILOMETRE POST EACH 989.20 1,952.61 4,506.63 1,862.11 9,310.54
Page 23
.
Page 24

January - 2009
BUNEER
(07-A)
Shabir Associates
Page 25
.
Page 26
CSR - January 2009
District: Buneer
Buneer District Code: 7-A
103 STRIPPING CM 2.54 102.54 - 26.27 131.35
WATER LEVEL

Page 27
CSR - January 2009
District: Buneer
ANY FILL
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.71 4.41 54.77 14.97 74.87
Page 28
CSR - January 2009
District: Buneer
"A")
"B")
Page 29
CSR - January 2009
District: Buneer
36
ALL RESPECT
THICKNESS)
410 BRICK WORK CM 306.69 296.86 3,529.64 1,033.30 5,166.48
Page 30
CSR - January 2009
District: Buneer
501c R.C.C PIPE CULVERT AASHTO M 170 CLASS II DIA 460 mm M 193.44 1,010.84 1,156.77 590.26 2,951.30
501l R.C.C PIPE CULVERT AASHTO M 170 CLASS IV DIA 460 mm M 187.59 1,010.84 1,129.32 581.94 2,909.68
CULVERT
508b BRICK PAVING (DOUBLE COURSE) SM 180.76 35.32 593.44 202.38 1,011.89
509a RIP RAP CLASS "A" CM 444.83 - 348.02 198.21 991.06
509b RIP RAP CLASS "B" CM 426.29 - 345.23 192.88 964.41
509c RIP RAP CLASS "C" CM 429.10 - 348.02 194.28 971.40
Page 31
CSR - January 2009
District: Buneer
REINFORCEMENT)
603 BRICK EDGING M 7.72 - 45.53 13.31 66.57
Page 32
CSR - January 2009
District: Buneer
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
Page 33
.
Page 34

January - 2009
BUTTGRAM
(07-B)
Shabir Associates
Page 35
.
Page 36
CSR - January 2009
District: Buttgram
Buttgram District Code: 7-B
103 STRIPPING CM 2.85 102.54 - 26.35 131.74
WATER LEVEL

Page 37
CSR - January 2009
District: Buttgram
ANY FILL
201 GRANULAR SUB-BASE CM 9.63 272.91 573.09 213.91 1,069.54
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.92 4.41 56.39 15.43 77.15
Page 38
CSR - January 2009
District: Buttgram
"A")
"B")
Page 39
CSR - January 2009
District: Buttgram
36
ALL RESPECT
THICKNESS)
407d1 CAST IN PLACE CONCRETE PILES UP TO 0.76 M DIA M 386.35 1,736.74 1,042.27 791.34 3,956.71
410 BRICK WORK CM 352.02 296.86 3,094.05 935.73 4,678.66
Page 40
CSR - January 2009
District: Buttgram
CULVERT
Page 41
CSR - January 2009
District: Buttgram
REINFORCEMENT)
601di PRECAST REINFORCED CONCRETE KERB NEW JERSY M 1,006.80 711.97 4,458.68 1,544.36 7,721.82
603 BRICK EDGING M 8.95 - 36.23 11.30 56.48
Page 42
CSR - January 2009
District: Buttgram
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
Page 43
.
Page 44

January - 2009
CHITRAL
(10)
Shabir Associates
Page 45
.
Page 46
CSR - January 2009
District: Chitral
Chitral District Code: 10
103 STRIPPING CM 2.68 104.40 - 26.77 133.86
WATER LEVEL

Page 47
CSR - January 2009
District: Chitral
ANY FILL
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.79 4.49 60.66 16.48 82.42
Page 48
CSR - January 2009
District: Chitral
"A")
"B")
401gi(1) PRECAST CONCRETE CLASS "A-1" CM 1,801.80 1,041.87 5,531.38 2,093.76 10,468.81
401gii PRECAST CONCRETE CLASS "B" CM 1,801.80 1,041.87 5,275.03 2,029.67 10,148.37
401giii(1) PRECAST CONCRETE CLASS "D1" CM 1,801.80 1,041.87 6,778.78 2,405.61 12,028.06
Page 49
CSR - January 2009
District: Chitral
36
ALL RESPECT
THICKNESS)
410 BRICK WORK CM 349.06 311.00 4,236.76 1,224.20 6,121.02
Page 50
CSR - January 2009
District: Chitral
CULVERT
Page 51
CSR - January 2009
District: Chitral
REINFORCEMENT)
603 BRICK EDGING M 8.41 - 55.37 15.94 79.72
604d STEEL POST OF METAL GUARD RAIL EACH 85.54 1,006.03 3,889.60 1,245.29 6,226.46
Page 52
CSR - January 2009
District: Chitral
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
610c KILOMETRE POST (0.610 X 0.114 X 1.5 M) EACH 591.34 1,005.59 2,121.89 929.71 4,648.53
611a CHAIN LINK WIRE FABRIC FENCING 1500 MM HEIGHT M 132.91 99.10 1,014.27 311.57 1,557.85
Page 53
.
Page 54

January - 2009
CHARSADDAH
(10-A)
Shabir Associates
Page 55
.
Page 56
CSR - January 2009
District: Charsaddah
Charsaddah District Code: 10-A
103 STRIPPING CM 2.09 93.22 - 23.83 119.13
WATER LEVEL

Page 57
CSR - January 2009
ANY FILL
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.61 4.12 52.48 14.30 71.51
Page 58
CSR - January 2009
"A")
"B")
Page 59
CSR - January 2009
36
ALL RESPECT
THICKNESS)
407d3 CAST IN PLACE CONCRETE PILES 0.80 - 1.4 M DIA (BORING M 479.75 2,481.06 819.36 945.04 4,725.21
410 BRICK WORK CM 289.69 282.72 2,998.75 892.79 4,463.95
Page 60
CSR - January 2009
CULVERT
Page 61
CSR - January 2009
REINFORCEMENT)
603 BRICK EDGING M 7.32 - 37.44 11.19 55.94
Page 62
CSR - January 2009
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
610d TEN KILOMETRE POST EACH 996.55 1,952.61 4,467.86 1,854.26 9,271.28
Page 63
.
Page 64

January - 2009
DERA ISMAIL KHAN

(12)
Shabir Associates
Page 65
.
Page 66
CSR - January 2009
District: Dera
Dera Ismail
Ismail Khan
Khan District Code: 12
103 STRIPPING CM 2.42 93.22 - 23.91 119.55
WATER LEVEL

Page 67
CSR - January 2009
District: Dera
Dera Ismail
Ismail Khan
ANY FILL
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.69 4.12 55.38 15.05 75.25
Page 68
CSR - January 2009
District: Dera
Dera Ismail
Ismail Khan
"A")
"B")
Page 69
CSR - January 2009
District: Dera
Dera Ismail
Ismail Khan
36
ALL RESPECT
THICKNESS)
410 BRICK WORK CM 310.55 282.72 2,914.01 876.82 4,384.10
411a STONE MASONRY RANDOM DRY CM 264.65 107.96 426.76 199.84 999.21
Page 70
CSR - January 2009
District: Dera
Dera Ismail
Ismail Khan
CULVERT
Page 71
CSR - January 2009
District: Dera
Dera Ismail
Ismail Khan
REINFORCEMENT)
603 BRICK EDGING M 8.19 - 36.48 11.17 55.83
Page 72
CSR - January 2009
District: Dera
Dera Ismail
Ismail Khan
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
Page 73
.
Page 74

January - 2009
DIR
(15)
Shabir Associates
Page 75
.
Page 76
CSR - January 2009
District: Dir
Dir District Code: 15
103 STRIPPING CM 2.76 102.54 - 26.32 131.62
WATER LEVEL

Page 77
CSR - January 2009
District: Dir
ANY FILL
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.75 4.41 58.03 15.80 78.99
Page 78
CSR - January 2009
District: Dir
"A")
"B")
Page 79
CSR - January 2009
District: Dir
36
ALL RESPECT
THICKNESS)
410 BRICK WORK CM 379.42 296.86 3,309.18 996.37 4,981.83
Page 80
CSR - January 2009
District: Dir
CULVERT
Page 81
CSR - January 2009
District: Dir
REINFORCEMENT)
603 BRICK EDGING M 9.34 - 41.13 12.62 63.09
Page 82
CSR - January 2009
District: Dir
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
Page 83
.
Page 84

January - 2009
HARIPUR HAZARA
(20-B)
Shabir Associates
Page 85
.
Page 86
CSR - January 2009
District: Haripur
Haripur Hazara
Hazara District Code: 20-B
103 STRIPPING CM 2.72 93.22 - 23.98 119.92
WATER LEVEL

Page 87
CSR - January 2009
District: Haripur
Haripur Hazara
ANY FILL
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.82 4.12 49.75 13.67 68.36
Page 88
CSR - January 2009
District: Haripur
Haripur Hazara
"A")
"B")
Page 89
CSR - January 2009
District: Haripur
Haripur Hazara
36
ALL RESPECT
THICKNESS)
410 BRICK WORK CM 355.79 282.72 3,029.04 916.89 4,584.44
Page 90
CSR - January 2009
District: Haripur
Haripur Hazara
CULVERT
Page 91
CSR - January 2009
District: Haripur
Haripur Hazara
REINFORCEMENT)
603 BRICK EDGING M 9.17 - 38.40 11.89 59.46
Page 92
CSR - January 2009
District: Haripur
Haripur Hazara
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
Page 93
.
Page 94

January - 2009
KARAK
(27)
Shabir Associates
Page 95
.
Page 96
CSR - January 2009
District: Karak
Karak District Code: 27
103 STRIPPING CM 2.85 93.22 - 24.02 120.09
WATER LEVEL

Page 97
CSR - January 2009
District: Karak
ANY FILL
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.88 4.12 53.35 14.59 72.93
Page 98
CSR - January 2009
District: Karak
"A")
"B")
Page 99
CSR - January 2009
District: Karak
36
ALL RESPECT
THICKNESS)
407d4 CAST IN PLACE CONCRETE PILES 0.80 - 1.4 M DIA (BORING M 1,042.32 4,135.11 1,148.17 1,581.40 7,907.00
410 BRICK WORK CM 335.42 282.72 3,199.01 954.29 4,771.44
Page 100
CSR - January 2009
District: Karak
CULVERT
Page 101
CSR - January 2009
District: Karak
REINFORCEMENT)
603 BRICK EDGING M 9.21 - 41.95 12.79 63.95
Page 102
CSR - January 2009
District: Karak
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
Page 103
.
Page 104

January - 2009
KOHAT
(34)
Shabir Associates
Page 105
.
Page 106
CSR - January 2009
District: Kohat
Kohat District Code: 34
103 STRIPPING CM 2.60 93.22 - 23.95 119.77
WATER LEVEL

Page 107
CSR - January 2009
District: Kohat
ANY FILL
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.72 4.12 54.68 14.88 74.40
Page 108
CSR - January 2009
District: Kohat
"A")
"B")
Page 109
CSR - January 2009
District: Kohat
36
ALL RESPECT
THICKNESS)
410 BRICK WORK CM 331.41 282.72 3,119.08 933.30 4,666.51
Page 110
CSR - January 2009
District: Kohat
CULVERT
Page 111
CSR - January 2009
District: Kohat
REINFORCEMENT)
603 BRICK EDGING M 8.61 - 39.84 12.11 60.56
Page 112
CSR - January 2009
District: Kohat
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
Page 113
.
Page 114

January - 2009
KOHISTAN DASU
(35)
Shabir Associates
Page 115
.
Page 116
CSR - January 2009
District: Kohistan
Kohistan dasu
dasu District Code: 35
103 STRIPPING CM 3.99 104.40 - 27.10 135.50
WATER LEVEL

Page 117
CSR - January 2009
District: Kohistan
Kohistan dasu
ANY FILL
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 1.08 4.49 59.51 16.27 81.34
Page 118
CSR - January 2009
District: Kohistan
Kohistan dasu
"A")
"B")
401b CONCRETE CLASS "B" CM 1,010.98 886.52 3,766.84 1,416.09 7,080.43
401d CONCRETE CLASS "D1" CM 1,159.37 1,392.12 6,055.70 2,151.80 10,758.99
401f LEAN CONCRETE CM 647.02 558.27 2,965.69 1,042.75 5,213.73
401gii PRECAST CONCRETE CLASS "B" CM 2,528.19 1,041.87 5,457.45 2,256.87 11,284.37
Page 119
CSR - January 2009
District: Kohistan
Kohistan dasu
36
ALL RESPECT
THICKNESS)
407d4 CAST IN PLACE CONCRETE PILES 0.80 - 1.4 M DIA (BORING M 1,153.13 4,548.62 1,403.66 1,776.35 8,881.76
410 BRICK WORK CM 502.21 311.00 3,670.43 1,120.91 5,604.53
Page 120
CSR - January 2009
District: Kohistan
Kohistan dasu
501e R.C.C PIPE CULVERT AASHTO M 170 CLASS II DIA 760 mm M 381.20 1,186.26 2,534.53 1,025.49 5,127.47
502a GRANULAR MATERIAL IN BED TO CONCRETE PIPE CM 134.53 130.82 563.91 207.31 1,036.57
CULVERT
502b CONCRETE CLASS "B" IN BEDDING AND ENCASEMENT OF CM 1,133.63 674.24 4,151.84 1,489.93 7,449.64
Page 121
CSR - January 2009
District: Kohistan
Kohistan dasu
509g REINFORCED CONCRETE SLOPE PROTECTION (WITHOUT CM 1,187.18 388.33 4,759.55 1,583.76 7,918.82
REINFORCEMENT)
509h FILTER LAYER OF GRANULAR MATERIAL CM 70.25 211.17 531.50 203.23 1,016.15
601dii PRECAST KERB IN CONCRETE CLASS A-1 OF SIZE 450 X 150 MM M 207.86 102.44 512.83 205.78 1,028.92
603 BRICK EDGING M 12.45 - 44.00 14.11 70.56
604d STEEL POST OF METAL GUARD RAIL EACH 117.97 1,006.03 3,889.60 1,253.40 6,267.00
607d TRAFFIC ROAD SIGN CATEGORY 3 (b) EACH 1,010.74 616.60 21,728.96 5,839.08 29,195.39
Page 122
CSR - January 2009
District: Kohistan
Kohistan dasu
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
610c KILOMETRE POST (0.610 X 0.114 X 1.5 M) EACH 839.65 1,005.59 2,181.85 1,006.78 5,033.88
611a CHAIN LINK WIRE FABRIC FENCING 1500 MM HEIGHT M 189.55 99.10 1,023.53 328.04 1,640.22
Page 123
.
Page 124

January - 2009
LUCKY MURWAT
(41-B)
Shabir Associates
Page 125
.
Page 126
CSR - January 2009
District: Lucky
Lucky Murwat
Murwat District Code: 41-B
103 STRIPPING CM 2.76 93.22 - 23.99 119.97
WATER LEVEL

Page 127
CSR - January 2009
District: Lucky
Lucky Murwat
ANY FILL
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.74 4.12 55.01 14.97 74.84
Page 128
CSR - January 2009
District: Lucky
Lucky Murwat
"A")
"B")
Page 129
CSR - January 2009
District: Lucky
Lucky Murwat
36
ALL RESPECT
THICKNESS)
410 BRICK WORK CM 389.20 282.72 3,119.01 947.73 4,738.67
Page 130
CSR - January 2009
District: Lucky
Lucky Murwat
CULVERT
Page 131
CSR - January 2009
District: Lucky
Lucky Murwat
REINFORCEMENT)
603 BRICK EDGING M 10.17 - 40.42 12.65 63.24
Page 132
CSR - January 2009
District: Lucky
Lucky Murwat
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
Page 133
.
Page 134

January - 2009
MALAKAND
(42)
Shabir Associates
Page 135
.
Page 136
CSR - January 2009
District: Malakand
Malakand District Code: 42
103 STRIPPING CM 2.22 93.22 - 23.86 119.30
WATER LEVEL

Page 137
CSR - January 2009
District: Malakand
ANY FILL
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.60 4.12 52.93 14.41 72.07
Page 138
CSR - January 2009
District: Malakand
"A")
"B")
Page 139
CSR - January 2009
District: Malakand
36
ALL RESPECT
THICKNESS)
407d3 CAST IN PLACE CONCRETE PILES 0.80 - 1.4 M DIA (BORING M 460.24 2,481.06 1,013.47 988.69 4,943.46
410 BRICK WORK CM 313.25 282.72 3,084.04 920.00 4,600.02
Page 140
CSR - January 2009
District: Malakand
CULVERT
Page 141
CSR - January 2009
District: Malakand
REINFORCEMENT)
603 BRICK EDGING M 7.89 - 39.46 11.84 59.18
Page 142
CSR - January 2009
District: Malakand
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
Page 143
.
Page 144

January - 2009
MANSEHRA
(43)
Shabir Associates
Page 145
.
Page 146
CSR - January 2009
District: Mansehra
Mansehra District Code: 43
103 STRIPPING CM 2.44 93.22 - 23.92 119.58
WATER LEVEL

Page 147
CSR - January 2009
District: Mansehra
ANY FILL
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.78 4.12 52.49 14.35 71.74
Page 148
CSR - January 2009
District: Mansehra
"A")
"B")
Page 149
CSR - January 2009
District: Mansehra
36
ALL RESPECT
THICKNESS)
410 BRICK WORK CM 317.65 282.72 2,999.01 899.84 4,499.22
Page 150
CSR - January 2009
District: Mansehra
CULVERT
Page 151
CSR - January 2009
District: Mansehra
REINFORCEMENT)
603 BRICK EDGING M 8.14 - 38.11 11.56 57.82
Page 152
CSR - January 2009
District: Mansehra
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
Page 153
.
Page 154

January - 2009
MARDAN
(44)
Shabir Associates
Page 155
.
Page 156
CSR - January 2009
District: Mardan
Mardan District Code: 44
103 STRIPPING CM 2.23 93.22 - 23.86 119.32
WATER LEVEL

Page 157
CSR - January 2009
District: Mardan
ANY FILL
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.63 4.12 50.39 13.79 68.93
Page 158
CSR - January 2009
District: Mardan
"A")
"B")
Page 159
CSR - January 2009
District: Mardan
36
ALL RESPECT
THICKNESS)
410 BRICK WORK CM 306.85 282.72 2,906.48 874.01 4,370.07
Page 160
CSR - January 2009
District: Mardan
CULVERT
Page 161
CSR - January 2009
District: Mardan
REINFORCEMENT)
603 BRICK EDGING M 7.90 - 36.48 11.10 55.48
Page 162
CSR - January 2009
District: Mardan
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
Page 163
.
Page 164

January - 2009
NOWSHERA
(49-C)
Shabir Associates
Page 165
.
Page 166
CSR - January 2009
District: Nowshera
Nowshera District Code: 49-C
103 STRIPPING CM 2.38 93.22 - 23.90 119.49
WATER LEVEL

Page 167
CSR - January 2009
District: Nowshera
ANY FILL
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.67 4.12 50.42 13.80 69.01
Page 168
CSR - January 2009
District: Nowshera
"A")
"B")
Page 169
CSR - January 2009
District: Nowshera
36
ALL RESPECT
THICKNESS)
410 BRICK WORK CM 311.41 282.72 2,945.88 885.00 4,425.02
Page 170
CSR - January 2009
District: Nowshera
CULVERT
Page 171
CSR - January 2009
District: Nowshera
REINFORCEMENT)
603 BRICK EDGING M 8.21 - 36.48 11.17 55.86
Page 172
CSR - January 2009
District: Nowshera
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
Page 173
.
Page 174

January - 2009
PESHAWAR
(52)
Shabir Associates
Page 175
.
Page 176
CSR - January 2009
District: Peshawar
Peshawar District Code: 52
103 STRIPPING CM 2.54 93.22 - 23.94 119.70
WATER LEVEL

Page 177
CSR - January 2009
District: Peshawar
ANY FILL
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.66 4.12 52.89 14.42 72.10
Page 178
CSR - January 2009
District: Peshawar
"A")
"B")
Page 179
CSR - January 2009
District: Peshawar
36
ALL RESPECT
THICKNESS)
410 BRICK WORK CM 364.29 282.72 3,085.20 933.05 4,665.26
Page 180
CSR - January 2009
District: Peshawar
CULVERT
Page 181
CSR - January 2009
District: Peshawar
REINFORCEMENT)
603 BRICK EDGING M 9.38 - 39.36 12.19 60.93
Page 182
CSR - January 2009
District: Peshawar
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
Page 183
.
Page 184

January - 2009
SWAT SAIDU SHARIF

(66)
Shabir Associates
Page 185
.
Page 186
CSR - January 2009
District: Swat
Swat Saidu
Saidu Sharif
Sharif District Code: 66
103 STRIPPING CM 2.73 102.54 - 26.32 131.58
WATER LEVEL

Page 187
CSR - January 2009
District: Swat
Swat Saidu
Saidu Sharif
ANY FILL
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.73 4.41 58.20 15.84 79.18
Page 188
CSR - January 2009
District: Swat
Swat Saidu
Saidu Sharif
"A")
"B")
Page 189
CSR - January 2009
District: Swat
Swat Saidu
Saidu Sharif
36
ALL RESPECT
THICKNESS)
410 BRICK WORK CM 328.90 296.86 3,338.00 990.94 4,954.70
Page 190
CSR - January 2009
District: Swat
Swat Saidu
Saidu Sharif
CULVERT
Page 191
CSR - January 2009
District: Swat
Swat Saidu
Saidu Sharif
REINFORCEMENT)
603 BRICK EDGING M 8.52 - 42.11 12.66 63.28
Page 192
CSR - January 2009
District: Swat
Swat Saidu
Saidu Sharif
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
Page 193
.
Page 194

January - 2009
SWABI
(66-A)
Shabir Associates
Page 195
.
Page 196
CSR - January 2009
District: Swabi
Swabi District Code: 66-A
103 STRIPPING CM 2.36 93.22 - 23.89 119.47
WATER LEVEL

Page 197
CSR - January 2009
District: Swabi
ANY FILL
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.65 4.12 50.41 13.80 68.98
Page 198
CSR - January 2009
District: Swabi
"A")
"B")
Page 199
CSR - January 2009
District: Swabi
36
ALL RESPECT
THICKNESS)
410 BRICK WORK CM 342.65 282.72 3,189.01 953.60 4,767.98
Page 200
CSR - January 2009
District: Swabi
CULVERT
Page 201
CSR - January 2009
District: Swabi
REINFORCEMENT)
603 BRICK EDGING M 8.75 - 41.76 12.63 63.14
Page 202
CSR - January 2009
District: Swabi
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
Page 203
.
Page 204

January - 2009
TANK
(70-A)
Shabir Associates
Page 205
.
Page 206
CSR - January 2009
District: Tank
Tank District Code: 70-A
103 STRIPPING CM 2.74 93.22 - 23.99 119.95
WATER LEVEL

Page 207
CSR - January 2009
District: Tank
ANY FILL
LAYER
AGGREGATE CLASS B
304d SEAL COAT SM 0.74 4.12 55.73 15.15 75.74
Page 208
CSR - January 2009
District: Tank
"A")
"B")
Page 209
CSR - January 2009
District: Tank
36
ALL RESPECT
THICKNESS)
410 BRICK WORK CM 352.35 282.72 2,929.04 891.03 4,455.14
Page 210
CSR - January 2009
District: Tank
CULVERT
Page 211
CSR - January 2009
District: Tank
REINFORCEMENT)
603 BRICK EDGING M 9.67 - 36.48 11.54 57.69
Page 212
CSR - January 2009
District: Tank
4.0 M ARROWS
M ARROWS
OF 15 cm WIDTH
OF 15 cm WIDTH
OF 20 cm WIDTH
OF 20 cm WIDTH
ARROWS
ARROWS
STOP
STOP
SINGLE)
DOUBLE)
Page 213
.

CSRNWFP09

Uploaded by

Copyright:

Available Formats

CSRNWFP09

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CSRNWFP09

Uploaded by

Copyright:

Available Formats

N ATION AL HIGHW AY AUT HORITY

COMPOSITE SCHEDULE OF RATES

It must be understood that main objective of the CSR is to provide a realistic

My gratitude to The Chairman NHA, Member (Finance), Member (Operations),

To prepare a price for a Civil Engineering project, then, it is necessary to have

There is increasing growing pressure on the part of project sponsors for an

Preparing Project Cost Estimate and PC-1

Evaluating Tender / Bids

Evaluating Claims and Variation Order

In order to prepare an authentic Composite Schedule of Rates and to keep it

Collection of first hand, prudent and legitimate information for inputs

Merging the above information in proper proportion according to Design

Specifications and Methodology for Construction items have been adopted as

i. Manpower code starting from 1001 onwards

ii. Material code starting from 2001 onwards

iii. Equipment code starting from 3001 onwards

iv. Overheads, Profits & Preliminaries

d. For the preparation of rates following documents have been referred:

i. General Specifications 1998

iii. Statistical Bulletins by Federal Bureau of Statistics

iv. Current Market rates study

a. Allocation of Code Numbers:

Costs of manpower engaged on Plant & Equipment have been included in

i. Social Security Payment

ii. E.O.B.I. Payment

iii. Education Cess Payment

iv. Yearly Leave Salary (Earned, casual and sick)

vi. Provident Fund (Contribution of Employer) or Gratuity

vii. Mess Expenses (Site Staff)

viii. Entertainment Allowance (Provisional)

ix. Group Life Insurance

x. Site Staff Accommodation

2.2 CONSTRUCTION MATERIAL:

a. Allocation of Code Numbers to Materials:

Considering the location of each district, Engineers decided the most

In order to arrive at a “Material at sources” rate, following considerations have

i. Material royalty at quarry (actual or estimated)

ii. Cost of Preparation of material

iii. Unauthorized local charges in the province of Balochistan and Sind

iv. Loading of material in truck / trailer etc

Transportation charges have been taken as actual, where local transporters

In case of quarry materials, the source of materials for embankment, Sub-

2.3 PLANT AND EQUIPMENT

a. Allocation of Code Numbers

b. Power, Performance and Maintenance of Plant & Equipment

c. Formulation of Rates of Plant and Equipment

2.4 FORMULAE FOR CONSTRUCTION ITEMS

Manpower Hour and Number

The level of profit is governed by the degree of competition applicable to the

b. Head Office Overheads

Preliminaries cost in Civil Engineering works or indirectly related to the actual

The following checklist is representative but not exhaustive which is not

All non-productive supervisory staff on site i.e., agents, clerks,

Fitters, electricians and assistants engaged on general plant

Site Transport for Staff and General Use

Contractors offices rental / construction / site huts and associated running

There will be many other items of preliminaries which may have to be

Preliminaries % percentage can vary from project to project.

Tax has been included as per Government rules.

2.6 VARIABLES EFFECTING THE RATE ANALYSIS