Scribd
Upload
57 views1 page

Introduction of Control Systems

Control systems are components added to other systems to increase functionality or meet design criteria. Control engineering techniques are used widely in both simple and complex machines. This document introduces control engineering and discusses some advanced topics, though it notes that control engineering is a large field. It provides an example of adding a controller to a motor system to increase its performance by supplying more power initially to reach the target speed faster. There are two main approaches to designing new control systems: the classical and modern approaches.

Uploaded by

madhurithk
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
57 views1 page

Introduction of Control Systems

Control systems are components added to other systems to increase functionality or meet design criteria. Control engineering techniques are used widely in both simple and complex machines. This document introduces control engineering and discusses some advanced topics, though it notes that control engineering is a large field. It provides an example of adding a controller to a motor system to increase its performance by supplying more power initially to reach the target speed faster. There are two main approaches to designing new control systems: the classical and modern approaches.

Uploaded by

madhurithk
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

What are Control Systems?

The study and design of automatic Control Systems, a field known as control engineering, is a large
and expansive area of study. Control systems, and control engineering techniques have become a
pervasive part of modern technical society. From devices as simple as a toaster, to complex machines
like space shuttles and rockets, control engineering is a part of our everyday life. This book will
introduce the field of control engineering, and will build upon those foundations to explore some of
the more advanced topics in the field. Note, however, that control engineering is a very large field,
and it would be foolhardy of any author to think that they could include all the information into a
single book. Therefore, we will be content here to provide the foundations of control engineering, and
then describe some of the more advanced topics in the field. Control systems are components that are
added to other components, to increase functionality, or to meet a set of design criteria. Let's start off
with an immediate example: We have a particular electric motor that is supposed to turn at a rate of 40
RPM. To achieve this speed, we must supply 10 Volts to the motor terminals. However, with 10 volts
supplied to the motor at rest, it takes 30 seconds for our motor to get up to speed. This is valuable time
lost. Now, we have a little bit of a problem that, while simplistic, can be a point of concern to people
who are both designing this motor system, and to the people who might potentially buy it. It would
seem obvious that we should increase the power to the motor at the beginning, so that the motor gets
up to speed faster, and then we can turn the power back down to 10 volts once it reaches speed.
Now this is clearly a simplisitic example, but it illustrates one important point: That we can add
special "Controller units" to preexisting systems, to increase performance, and to meet new system
specifications. There are essentially two methods to approach the problem of designing a new control
system: the Classical Approach, and the Modern Approach

You might also like