Beachwood Canvas Catalog 2009
Beachwood Canvas Catalog 2009
Beachwood Canvas Catalog 2009
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
The Bugler & Flying Jeep logos are registered trademarks & are the sole & exclusive property of Beachwood Canvas Works.
The trademarks & this cross reference guide may not be used or reproduced in part or in whole
without the express written permission from Beachwood Canvas Works.
** The HISTORY CHANNEL logo is a registered trademark of the A & E Television Network
*JEEP is a registered trademark of the Chrysler Corporation
01OCT09
GETTING TO KNOW YOUR PRIDE & JOY
WELCOME TO HISTORY! AS YOU ARE NO DOUBT AWARE, YOU POSSESS A REMNANT OF UNITED STATES AUTOMOTIVE INNOVATIVENESS THAT HAS HAD THE TEN-
NACITY TO PUT THE WORLD ON WHEELS AND CAPTURED THE LOVE OF ALL WHO HAVE TOUCHED HER. NO OTHER VEHICLE EVER MADE CAN STILL BE FOUND IN GREAT
NUMBERS, STILL IN DAILY USE, WORLDWIDE, OVER HALF A CENTURY AFTER IT'S INITIAL PRODUCTION. HELP US, HELP YOU KEEP THE LEGEND ALIVE! GET TO KNOW YOUR
JEEP BEFORE YOU START THE LONG, BUT FULLFILLING, ROAD TO RESTORATION. MANY JEEP PARTS ARE INTERCHANGEABLE! OVER THE DECADES, TAILGATES ARE
COMMONLY ADDED OR REMOVED, WINDSHIELDS SWAPPED, ELECTRICAL SYSTEM VOLTAGES CHANGED, SEVERAL VEHICLES CANNIBALIZED TO MAKE ONE. TAKE TIME
BELOW TO PROPERLY IDENTIFY YOUR MODEL BEFORE ORDERING. DO NOT RELY ENTIRELY ON DATA PLATES OR TITLES, AS THEY WERE OFTEN INCORRECT OR EXCHANGED!
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C THE WORD "JEEP" IS A REGISTERED TRADEMARK OF THE CHRYLSER CORPORATION
WHAT YOU CAN EXPECT FROM BEACHWOOD CANVAS WORKS:
GOV'T
HEAVY MIL-SPECIFICATION CANVAS: PROFESSIONAL STAFF: INDEX GROUP #
PAGE
Our canvas is first run quality, contracted to original Including a former General Motors Engineer and com-
specifications, so that we can assure an original look, mercial artist for product research and design. Engine 01 4
weave, shade, texture, feel, and even smell. This
canvas exceeds many of the original weight specs SHOW WINNING WORK:
for many vehicle tops. We DO NOT use seconds Not only do the majority of MVPA national show winners
Clutch 02 8
or over-runs, or 'wide' weave non-domestic goods. use BEACHWOOD CANVAS, but our canvas has been
But it's not just the canvas that makes an exceptional
product!
found on AACA Senior show award winners! Fuel 03 9
PROVEN RESTORATION SKILLS:
MILITARY BLACK HARDWARE: Some of our private collection and antique military Exhaust 04 11
All hardware including buckles, tips, grommets, snaps, vehicles have won several local and national awards
rivets, and canvas fasteners are mil-black finished sponsored by the MVPA and other antique auto clubs,
at an approved plater when specifications dictate. demonstrating full vehicle knowledge and quality
Cooling 05 12
We DO NOT use bright finish hardware, shiny raw workmanship, which can not be claimed by all other
brass grommets, or repainted, used, or bright finish
fasteners. Press set, not hand set, fasteners, and
canvas suppliers. Electrical 06 13
high grade grommets are used where necessary to INCREASED VEHICLE VALUES:
resist "pull-out". Where possible, black finish stain- Ads from Hemmings Motor News & other magazines Transmission 07 22
less steel is substituted for original steel fastener have listed vehicles restored with BEACHWOOD CAN-
specifications. VAS products in order to receive top dollar at sale.
Transfer Case 08 24
CERTIFIED COMPONENTS: DETAILED END PRODUCTS:
Our suppliers must be certified to meet high quality
military specifications for the U.S. Government. This
We supply more than just a canvas product. In many Propeller Shaft 09 25
cases our reproductions include leather, wood, and
includes our thread, canvas, binding, webbing, heavy metal parts. We reproduce or locate obsolete body,
gauge window glass, mil-black fasteners, & many windshield, and canvas fasteners, and add the finishing Front Axle 10 26
other parts. We DO NOT use used straps, used touch to a canvas repro with detailed stenciling. We
canvas, synthetic webbing, or non domestic materi- also supply many installation kits, instructional manu-
als, which do not provide original appearance, and als, service custom requests to your order, and even Rear Axle 11 28
severely shorten product life. supply historical information.
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
GROUP 01:ENGINE
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
ENGINE, REBUILT B0101-R G0101-R 2A0101-R 3A0101-R C0101-R 3B0101-R 3B0101-R 3B0101-R D0101-R
PLUG, FREEZE 1-1/4" DIA.***** B0102-FP B0102-FP B0102-FP B0102-FP B0102-FP B0102-FP B0102-FP B0102-FP B0102-FP
HEAD, EARLY 2-BOLT WATER OUTLET^ B0103-2BLT+ ----- ----- ----- ----- ----- ----- ----- -----
HEAD, EARLY^ B0103-NJ++ ----- ----- ----- ----- ----- ----- ----- -----
HEAD, STANDARD^ B0103+++ G0103 B0103++++ 3A0103 C0103^^ 3B0103 3B0103 3B0103 D0103^^
GASKET & SEAL, OVERHAUL SET B0104 B0104 B0104 B0104 B0104 3B0104 3B0104 3B0104 3B0104
SEAL, CRANKSHAFT FRONT B0104-CSF B0104-CSF B0104CSF^ B0104-CSF B0104-CSF B0104-CSF B0104-CSF B0104-CSF B0104-CSF
SEAL (2 HALVES), CRANKSHAFT REAR B0104-CSR2 B0104-CSR2 B0104-CSR2 B0104-CSR2 B0104-CSR2 B0104-CSR2 B0104-CSR2 B0104-CSR2 B0104-CSR2
PACKING, CRANKSHAFT REAR B0104-CPR** B0104-CPR** B0104-CPR** B0104-CPR** B0104-CPR** B0104-CPR** B0104-CPR** B0104-CPR** B0104-CPR**
GASKET, CHAIN COVER TIMING B0104-TCG B0104-TCG B0104-TCG B0104-TCG B0104-TCG B0104-TCG B0104-TCG B0104-TCG B0104-TCG
GASKET, HEAD B0105 B0105 B0105 B0105 B0105 3B0105 3B0105 3B0105 3B0105
GASKET, OIL PAN B0106 B0106 B0106 B0106 B0106 B0106 B0106 B0106 B0106
GASKET, VALVE COVER SIDE B0107 B0107 B0107 B0107 B0107 B0107 B0107 B0107 B0107
MANIFOLD, EXHAUST B0108-E B0108-E B0108-E B0108-E B0108-E 3B0108-E 3B0108-E 3B0108-E 3B0108-E
MANIFOLD, INTAKE B0108-I B0108-I B0108-I B0108-I B0108-I ----- ----- ----- -----
STUD KIT, MANIFOLDS B0108-SK B0108-SK B0108-SK B0108-SK B0108-SK 3B0108-SK 3B0108-SK 3B0108-SK 3B0108-SK
GASKET, ROCKER ARM COVER ----- ----- ----- ----- ----- 3B0109 3B0109 3B0109 3B0109
CRANKSHAFT, NEW MANUFACTURE B0110 B0110 B0110 B0110 B0110 B0110 B0110 B0110 B0110
CRANKSHAFT, TAKEOUT (USEABLE) B0110-T B0110-T B0110-T B0110-T B0110-T B0110-T B0110-T B0110-T B0110-T
NUT, CRANKSHAFT PULLEY HANDCRANK* B0110-NUT B0110-NUT B0110-NUT B0110-NUT B0110-NUT B0110-NUT B0110-NUT B0110-NUT B0110-NUT
NUT, CRANKSHAFT PULLEY PLAIN* 2A0110-NUT 2A0110-NUT 2A0110-NUT 2A0110-NUT 2A0110-NUT 2A0110-NUT 2A0110-NUT 2A0110-NUT 2A0110-NUT
BEARING SET, CRANK STANDARD SIZE B0111-S B0111-S B0111-S B0111-S B0111-S B0111-S B0111-S B0111-S B0111-S
BEARING SET, CRANK .010 OVERSIZE B0111-10 B0111-10 B0111-10 B0111-10 B0111-10 B0111-10 B0111-10 B0111-10 B0111-10
BEARING SET, CRANK .020 OVERSIZE B0111-20 B0111-20 B0111-20 B0111-20 B0111-20 B0111-20 B0111-20 B0111-20 B0111-20
BEARING SET, CRANK .030 OVERSIZE B0111-30 B0111-30 B0111-30 B0111-30 B0111-30 B0111-30 B0111-30 B0111-30 B0111-30
BEARING SET, CRANK .040 OVERSIZE B0111-40 B0111-40 B0111-40 B0111-40 B0111-40 B0111-40 B0111-40 B0111-40 B0111-40
BEARING SET, CRANK .050 OVERSIZE B0111-50 B0111-50 B0111-50 B0111-50 B0111-50 B0111-50 B0111-50 B0111-50 B0111-50
BEARING SET, CRANK .060 OVERSIZE B0111-60 B0111-60 B0111-60 B0111-60 B0111-60 B0111-60 B0111-60 B0111-60 B0111-60
BEARING SET, CRANK .070 OVERSIZE B0111-70 B0111-70 B0111-70 B0111-70 B0111-70 B0111-70 B0111-70 B0111-70 B0111-70
BEARING SET, CRANK .080 OVERSIZE B0111-80 B0111-80 B0111-80 B0111-80 B0111-80 B0111-80 B0111-80 B0111-80 B0111-80
RING SETS, PISTONS STANDARD (1 RPV) B0112-S B0112-S B0112-S B0112-S B0112-S B0112-S B0112-S B0112-S B0112-S
RING SETS, PISTONS.010 OVER (1 RPV) B0112-10 B0112-10 B0112-10 B0112-10 B0112-10 B0112-10 B0112-10 B0112-10 B0112-10
RING SETS, PISTONS.020 OVER (1 RPV) B0112-20 B0112-20 B0112-20 B0112-20 B0112-20 B0112-20 B0112-20 B0112-20 B0112-20
RING SETS, PISTONS.030 OVER (1 RPV) B0112-30 B0112-30 B0112-30 B0112-30 B0112-30 B0112-30 B0112-30 B0112-30 B0112-30
RING SETS, PISTONS.040 OVER (1 RPV) B0112-40 B0112-40 B0112-40 B0112-40 B0112-40 B0112-40 B0112-40 B0112-40 B0112-40
RING SETS, PISTONS.050 OVER (1 RPV) B0112-50 B0112-50 B0112-50 B0112-50 B0112-50 B0112-50 B0112-50 B0112-50 B0112-50
RING SETS, PISTONS.060 OVER (1 RPV) B0112-60 B0112-60 B0112-60 B0112-60 B0112-60 B0112-60 B0112-60 B0112-60 B0112-60
HEAD,PISTON & PIN STANDARD SIZE**** B0113-S B0113-S B0113-S B0113-S B0113-S B0113-S B0113-S B0113-S B0113-S
HEAD PISTON & PIN .010 OVERSIZE**** B0113-10 B0113-10 B0113-10 B0113-10 B0113-10 B0113-10 B0113-10 B0113-10 B0113-10
HEAD PISTON & PIN .020 OVERSIZE**** B0113-20 B0113-20 B0113-20 B0113-20 B0113-20 B0113-20 B0113-20 B0113-20 B0113-20
HEAD PISTON & PIN .030 OVERSIZE**** B0113-30 B0113-30 B0113-30 B0113-30 B0113-30 B0113-30 B0113-30 B0113-30 B0113-30
HEAD PISTON & PIN .040 OVERSIZE**** B0113-40 B0113-40 B0113-40 B0113-40 B0113-40 B0113-40 B0113-40 B0113-40 B0113-40
HEAD PISTON & PIN .050 OVERSIZE**** B0113-50 B0113-50 B0113-50 B0113-50 B0113-50 B0113-50 B0113-50 B0113-50 B0113-50
HEAD PISTON & PIN .060 OVERSIZE**** B0113-60 B0113-60 B0113-60 B0113-60 B0113-60 B0113-60 B0113-60 B0113-60 B0113-60
ROD, CONNECTING 1ST OR 3RD** B0114-13 B0114-13 B0114-13 B0114-13 B0114-13 B0114-13 B0114-13 B0114-13 B0114-13
ROD, CONNECTING 2ND OR 4TH** B0114-24 B0114-24 B0114-24 B0114-24 B0114-24 B0114-24 B0114-24 B0114-24 B0114-24
*B0110-NUT HAS A CENTER BAR FOR THE USE OF A STARTER HANDCRANK. 2A0110-NUT IS A PLAIN NUT WITHOUT CENTER BAR.
+ ALL L-HEAD BLOCK HEADS ARE INTER-CHANGEABLE WITH EACH OTHER. ALL F-HEAD BLOCK HEADS ARE INTER-CHANGEABLE WITH EACH OTHER
+EARLY SLAT GRILL MB’s USED A 2-BOLT THERMOSTAT HOUSING ON THE HEAD (B0103-2BLT) WITHOUT "JEEP" CAST IN THE HEAD.
++1941-43 MB'S USED B0103-NJ WITH A 3-BOLT THERMOSTAT HOUSING ON THE HEAD (B0103), WITHOUT "JEEP" CAST IN THE HEAD.
+++B0103 HAS A 3-BOLT THERMOSTAT HOUSING ON THE HEAD WITH "JEEP" CAST IN THE HEAD. EARLY CJ2A USED B0103. LATE CJ2A USED 3A0103.
++++3A0103 HAS A 3-BOLT WATER OUTLET, "JEEP" CAST IN THE HEAD, AND STRENGTHENING RIBS FROM FRONT TO BACK.
^^ C0103 IS THE SAME AS 3A0103 BUT HAS A BY-PASS PORT. D0103 IS THE SAME AS 3B0103 BUT HAS A BY-PASS PORT.
^ALL L-HEAD HEADS ARE INTERCHANGABLE WITH EACH OTHER FOR FUNCTION. DIFFERENCES ARE NOTED FOR THE FINE POINTS OF RESTORATION.
^ALL F-HEAD HEADS ARE INTERCHANGABLE WITH EACH OTHER FOR FUNCTION. DIFFERENCES ARE NOTED FOR THE FINE POINTS OF RESTORATION.
If no * after part number description , only one part number is required per vehicle; **= 2 rpv; ***= 3 rpv; ****= 4 rpv; *****= 5
L- "Flat" Head Engine F- "Over" HeadValve Engine
MB GPW M38 CJ2A CJ3A CJ3B CJ5 CJ6 M38A1 M170
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 4
"F-HEAD" OVERHEAD VALVE 134 C.I. 4 CYLINDER ENGINE
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 5
GROUP 01: ENGINE
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
BEARING, CONNECTING ROD STD**** B0115-S B0115-S B0115-S B0115-S B0115-S B0115-S B0115-S B0115-S B0115-S
BEARING, CONNECTING ROD .010 OVER**** B0115-10 B0115-10 B0115-10 B0115-10 B0115-10 B0115-10 B0115-10 B0115-10 B0115-10
BEARING, CONNECTING ROD .020 OVER**** B0115-20 B0115-20 B0115-20 B0115-20 B0115-20 B0115-20 B0115-20 B0115-20 B0115-20
BEARING, CONNECTING ROD .030 OVER**** B0115-30 B0115-30 B0115-30 B0115-30 B0115-30 B0115-30 B0115-30 B0115-30 B0115-30
BEARING, CONNECTING ROD .040 OVER**** B0115-40 B0115-40 B0115-40 B0115-40 B0115-40 B0115-40 B0115-40 B0115-40 B0115-40
BEARING, CONNECTING ROD .050 OVER**** B0115-50 B0115-50 B0115-50 B0115-50 B0115-50 B0115-50 B0115-50 B0115-50 B0115-50
BEARING, CONNECTING ROD .060 OVER**** B0115-60 B0115-60 B0115-60 B0115-60 B0115-60 B0115-60 B0115-60 B0115-60 B0115-60
BEARING, CONNECTING ROD .070 OVER**** B0115-70 B0115-70 B0115-70 B0115-70 B0115-70 B0115-70 B0115-70 B0115-70 B0115-70
BEARING, CONNECTING ROD .080 OVER**** B0115-80 B0115-80 B0115-80 B0115-80 B0115-80 B0115-80 B0115-80 B0115-80 B0115-80
CAMSHAFT FOR GEAR DRIVEN ENGINES ----- ----- 2A0116^^ 2A0116 2A0116 3B0116 3B0116 3B0116 3B0116
CAMSHAFT FOR CHAIN DRIVEN ENGINES B0116 B0116 B0116^^ ----- ----- ----- ----- ----- -----
RETAINER (END), CAMSHAFT THRUST ----- ----- 2A0116-RET^^ 2A0116-RET 2A0116-RET 2A0116-RET 2A0116-RET 2A0116-RET 2A0116-RET
BEARING, CAMSHAFT B0117 B0117 B0117 B0117 B0117 B0117 B0117 B0117 B0117
ARM, ROCKER LEFT** ----- ----- ----- ----- ----- 3B0118-L 3B0118-L 3B0118-L 3B0118-L
ARM, ROCKER RIGHT** ----- ----- ----- ----- ----- 3B0118-R 3B0118-R 3B0118-R 3B0118-R
ADJUSTER, TAPPET VALVE EXHAUST SCREW B0120-I B0120-I B0120-I B0120-I B0120-I B0120-I B0120-I B0120-I B0120-I
ADJUSTER, TAPPET VALVE INTAKE SCREW B0120-I B0120-I B0120-I B0120-I B0120-I 3B0120-I 3B0120-I 3B0120-I 3B0120-I
VALVE, EXHAUST**** B0121-E B0121-E B0121-E B0121-E B0121-E 3B0121-E 3B0121-E 3B0121-E 3B0121-E
VALVE, INTAKE**** B0121-I B0121-I B0121-I B0121-I B0121-I 3B0121-I 3B0121-I 3B0121-I 3B0121-I
GUIDE, EXHAUST VALVE**** B0122-E B0122-E B0122-E B0122-E B0122-E B0122-E B0122-E B0122-E B0122-E
GUIDE, INTAKE VALVE**** B0122-I B0122-I B0122-I B0122-I B0122-I 3B0122-I 3B0122-I 3B0122-I 3B0122-I
ROD, PUSH INTAKE VALVE**** ----- ----- ----- ----- ----- 3B0119 3B0119 3B0119 3B0119
GASKET SET, VALVE (JOB) GRINDING KIT B0123 B0123 B0123 B0123 B0123 3B0123 3B0123 3B0123 3B0123
GEAR, CAMSHAFT TIMING ----- ----- 2A0124^^ 2A0124 2A0124 2A0124 2A0124 2A0124 2A0124
GEAR, CRANKSHAFT TIMING ----- ----- 2A0125^^ 2A0125 2A0125 2A0125 2A0125 2A0125 2A0125
CHAIN SPROCKET, CAMSHAFT TIMING B0124 B0124 B0124^^ ----- ----- ----- ----- ----- -----
CHAIN SPROCKET, CRANKSHAFT TIMING B0125 B0125 B0125^^ ----- ----- ----- ----- ----- -----
CHAIN, TIMING B0126 B0126 B0126^^ ----- ----- ----- ----- ----- -----
SEAL,TIMING GEAR FRONT B0104-CSF B0104-CSF B0104-CSF B0104-CSF B0104-CSF B0104-CSF B0104-CSF B0104-CSF B0104-CSF
PUMP, OIL FOR B0116 CAMSHAFT B0128 B0128 B0128^^ ----- ----- ----- ----- ----- -----
PUMP, OIL FOR 2A0116 CAMSHAFT ----- ----- 2A0128^^ 2A0128 2A0128 2A0128 2A0128 2A0128 2A0128
SUMP, OIL PAN B0130 B0130 B0130 B0130 B0130 B0130 B0130 B0130 B0130
MOUNT, MOTOR (RUBBER BLOCK)** B0131 B0131 B0131 B0131 B0131 B0131 B0131 B0131 B0131
MOUNTING KIT, ENGINE, TRANS & T.C. B0131-MK@ B0131-MK@ B0131-MK@ B0131-MK@ B0131-MK@ B0131-MK@ B0131-MK@ B0131-MK@ B0131-MK@
GROUND STRAP FOR ENGINE MOUNT B0656-1098 B0656-1098 ---- ---- ---- ---- ---- ---- ----
OIL FILTER CANNISTER & LID, MILITARY JR. B0133-C B0133-C B0133-C B0133-C+ B0133-C^ ----- ----- ----- B0133-C^
STRAP FOR B0133-C OIL FILTER MOUNTING** B0133-S B0133-S B0133-S B0133-S+ B0133-S^ ----- ----- -----
B0133-S^
INTERNAL FILTER ELEMENT FOR B0133-C B0132 B0132 B0132 B0132+ B0132^ ----- ----- ----- B0132^
GASKETFOR B0133-C LID B0133-G B0133-G B0133-G B0133-G+ B0133-G^ ----- ----- ----- B0133-G^
LINE, (HOSE) OIL FILTER INLET (DBL NUT) B0135-I B0135-I B0135-I B0135-I+ B0135-I ----- ----- ----- B0135-I
LINE, (HOSE) OIL FILTER OUTLET (DBL NUT) B0135-O B0135-O B0135-O B0135-O+ B0135-O ----- ----- ----- B0135-O
BRASS FLARE OIL CAN SIDE STRAIGHT-IN B0133-SFIT B0133-SFIT B0133-SFIT B0133-SFIT+ B0133-SFIT ----- ----- ----- B0133-SFIT
FITTING, BRASS FLARE OIL CAN BOT 90 DEG 2A0307-FIT 2A0307-FIT 2A0307-FIT 2A0307-FIT+ 2A0307-FIT ----- ----- ----- 2A0307-FIT
FITTING, BRASS FLARE OIL CAN BOT 45 DEG B0133-FIT45 B0133-FIT45 B0133-FIT45 B0133-FIT45+ B0133-FIT45 ----- ----- ----- B0307-FIT45
OIL FILTER CAN & LID (CIVILIAN) & STRAPS ----- ----- ----- 2A0133-L+ ----- 2A0133-L 2A0133-L 2A0133-L -----
INTERNAL FILTER ELEMENT FOR 2A0133-L ----- ----- ----- 2A0132-L+ ----- 2A0132-L 2A0132-L 2A0132-L -----
GASKETFOR 2A0133-L CANNISTER LID ----- ----- ----- 2A0133-G+ ----- 2A0133-G 2A0133-G 2A0133-G -----
LINE, (HOSE) OIL FILTER INLET (SGL NUT) ----- ----- ----- 2A0135-I+ ----- 2A0135-I 2A0135-I 2A0135-I -----
LINE, (HOSE) OIL FILTER OUTLET (SGL NUT) ----- ----- ----- 2A0135-O+ ----- 2A0135-O 2A0135-O 2A0135-O -----
FILTER, OIL EARLY (CUNO STYLE) MILITARY ----- ----- ----- ----- C0133 ----- ----- ----- C0133
STRAP, MOUNTING FILTER OIL (CUNO) ----- ----- ----- ----- C0133-S ----- ----- ----- C0133-S
BRACKET ON HEAD FOR OIL FILTER B0134 ^^^ B0134 ^^^ B0134 ^^^ B0134 ^^^ C0134 ^^^ 3B0134 3B0134 3B0134 3B0134
LINE, (HOSE) OIL GAUGE FLEXIBLE PART B0135-O B0135-O B0135-O B0135-O ----- ----- ----- ----- -----
TUBE, OIL FILLER EARLY WWII (PRESS FIT) B0136-E B0136-E ----- ----- ----- ----- ----- ----- -----
TUBE, OIL FILLER LATE (TWIST LOCK) B0136-L B0136-L B0136-L B0136-L B0136-L B0136-L B0136-L B0136-L D0136
CLAMP, OIL FILLER TUBE TO BLOCK B0136-CLP B0136-CLP B0136-CLP B0136-CLP B0136-CLP B0136-CLP B0136-CLP B0136-CLP B0136-CLP
DIPSTICK, EARLY WWII (PRESS FIT) B0137-E B0137-E ----- ----- ----- ----- ----- ----- -----
DIPSTICK, LATE (TWIST LOCK) B0137-L B0137-L B0137-L B0137-L B0137-L B0137-L B0137-L B0137-L D0137
SHIM, FRONT CARNKSHAFT PULLEY B0138 B0138 B0138 B0138 B0138 B0138 B0138 B0138 B0138
TAPPET, VALVE EXHAUST (CAM FOLLOWER) B0139 B0139 B0139 B0139 B0139 B0139 B0139 B0139 B0139
TAPPET, VALVE INTAKE (CAM FOLLOWER) B0139 B0139 B0139 B0139 B0139 3B0139 3B0139 3B0139 3B0139
COVER, VALVE (ENGINE SIDE) B0140 B0140 B0140 B0140 B0140 B0140 B0140 B0140 B0140
COVER, TIMING GEARS ----- ----- 2A0141^^ 2A0141 2A0141 2A0141 2A0141 2A0141 2A0141
COVER, TIMING CHAIN B0141 B0141 B0141^^ ----- ----- ----- ----- ----- -----
REQUIRED PER VEHICLE: If there is no * after the part number description, only one part number is required per vehicle; **2= RPV; ***3= RPV; ****4= RPV
+CJ3A USED THE MILITARY JUNIOR OIL FILTER CANNISTER B0133-C UP TO S/N 40352. AFTER THAT, CJ3A'S USED THE SMALLER 2A0133-L OIL CANNISTER.
2A0135-I & 2A0135-O CAN BE USED WITH B0133-C WITHOUT FLARE FITTINGS B0133-SFIT & 2A0307-FIT.
^THESE PARTS ARE FOR M38 M38A1 M170 WITH FULL SIZE MILITARY JUNIOR OIL FILTERS, NOT CUNO STYLE OIL FILTERS.
^^USE B0116, B0124, B0125, B0126, & B0141 FOR CJ2A'S WITH CHAIN TIMED ENGINES UP TO S/N 44417. AFTER S/N 44417, USE 2A0116, 2A0124, 2A0125, & 2A0141.
^^^B0134 HAS TRIANGULAR CUTOUTS IN BRACKET. C0134 HAS CIRCULAR CUTOUTS IN BRACKET. OTHERWISE INTERCHANGEABLE. @ B0131-MK INCLUDES (1) B0714, (2) B0131, & (1) B0811.
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 6
GROUP 01: ENGINE
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
VALVE, CRANKCASE VENT ASS'Y (PCV) B0158 B0158 B0158 B0158 B0158 B0158 B0158 B0158 B0158
LINE, PCV VALVE TO VALVE COVER B0158-LINE B0158-LINE B0158-LINE B0158-LINE B0158-LINE B0158-LINE B0158-LINE B0158-LINE B0158-LINE
FITTING, ON END OF B0158 & B0142 B0158-FIT B0158-FIT B0158-FIT B0158-FIT B0158-FIT B0158-FIT B0158-FIT B0158-FIT B0158-FIT
CONE, SITS ON B0140 FOR B0158 PCV B0142 B0142 B0142 B0142 B0142 B0142 B0142 B0142 B0142
GASKET FOR VALVE COVER CONE B0142 B0150 B0150 B0150 B0150 B0150 B0150 B0150 B0150 B0150
GASKET FOR VALVE COVER CONE B0142 BOLT HEAD B0150-BG B0150-BG B0150-BG B0150-BG B0150-BG B0150-BG B0150-BG B0150-BG B0150-BG
PLATE, FRONT MOTOR MOUNT B0143 B0143 2A0143 3A0143 3A0143 3A0143 3A0143 3A0143 3A0143
PLATE, FRONT MOTOR MOUNT (EARLY) ----- ----- B0143 ----- ----- ----- ----- ----- -----
GASKET SET, MANIFOLDS (BOTH) B0144 B0144 B0144 B0144 B0144 3B0144 3B0144 3B0144 3B0144
GASKET, BETWEEN INTAKE & EXHAUST B0144-C B0144-C B0144-C B0144-C B0144-C ----- ----- ----- -----
BOLT, CONNECTING ROD 3/8"DIA**** B0145 B0145 B0145 B0145 B0145 B0145 B0145 B0145 B0145
BOLT, CONNECTING ROD 7/16"DIA**** B0145-716 B0145-716 B0145-716 B0145-716 B0145-716 B0145-716 B0145-716 B0145-716 B0145-716
NUT, CONNECTING ROD BOLT 3/8"**** B0146 B0146 B0146 B0146 B0146 B0146 B0146 B0146 B0146
NUT, CONNECTING ROD BOLT 7/16"**** B0146-716 B0146-716 B0146-716 B0146-716 B0146-716 B0146-716 B0146-716 B0146-716 B0146-716
DOWEL, FLYWHEEL** B0148 B0148 B0148 B0148 B0148 B0148 B0148 B0148 B0148
PAN, OIL B0149 B0149 B0149 B0149 B0149 B0149 B0149 B0149 B0149
PLUG, OIL DRAIN W/GASKET B0149-OP B0149-OP B0149-OP B0149-OP B0149-OP B0149-OP B0149-OP B0149-OP B0149-OP
GASKET ONLY, PLUG OIL B0149-OPG B0149-OPG B0149-OPG B0149-OPG B0149-OPG B0149-OPG B0149-OPG B0149-OPG B0149-OPG
BOLT, HEAD (UP TO 15 RPV) B0153 G0153 B0153 B0153 B0153 3B0153 3B0153 3B0153 3B0153
STUD, HEAD (UP TO 15 RPV) B0154 B0154 B0154 B0154 B0154 ----- ----- ----- -----
NUT, HEAD (UP TO 15 RPV) B0155 B0155 B0155 B0155 B0155 ----- ----- ----- -----
COVER, ROCKER ARM ----- ----- ----- ----- ----- 3B0152 3B0152 3B0152 3B0152
STUDFOR VALVE COVER 3B0152 (2 RPV) ----- ----- ----- ----- ----- 3B0154 3B0154 3B0154 3B0154
NUT FOR VALVE COVER 3B0152 (2 RPV) ----- ----- ----- ----- ----- 3B0155 3B0155 3B0155 3B0155
PULLEY, CRANK FOR (6v or 12V) B0504 SINGLE FAN BELT B0156 B0156 2A0156 2A0156 2A0156 2A0156 2A0156 2A0156 2A0156
PULLEY, CRANK FOR (24V) C0504 DOUBLE FAN BELT ---- ---- ---- ---- C0156 ---- ---- ---- C0156
SPRING, VALVE INTAKE**** B0157 B0157 B0157 B0157 B0157 3B0157 3B0157 3B0157 3B0157
SPRING, VALVE EXHAUST**** B0157 B0157 B0157 B0157 B0157 B0157 B0157 B0157 B0157
RETAINER, VALVE SPRING (8 RPV) B0157-R B0157-R B0157-R B0157-R B0157-R 3B0157-R 3B0157-R 3B0157-R 3B0157-R
LOCK, VALVE SPRING RETAINER***** B0147-I B0147-I B0147-I B0147-I B0147-I 3B0147-I 3B0147-I 3B0147-I 3B0147-I
PETCOCK, BLOCK WATER DRAINAGE B0501-PC B0501-PC B0501-PC B0501-PC B0501-PC B0501-PC B0501-PC B0501-PC B0501-PC
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 7
GROUP 02: CLUTCH
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
HOUSING, BELL B0201 G0201 B0201 3A0201 C0201+ 3B0201-E++ 3B0201-E++ 3B0201-E++ D0201
HOUSING, BELL LATE STYLE ----- ----- 3A0201 ----- D0201+ 3B0201-L++ 3B0201-L++ 3B0201-L++ -----
COVER, (PLATE) INSPECTION BELL HOUSING B0213 B0213 B0213 B0213 B0213+ B0213 B0213 B0213
D0213
COVER, (PLATE) BELL HOUSING LATE STYLE ----- ----- ----- ----- D0213+ ----- ----- ----- -----
PLATE, BELL HOUSING REAR MAIN B0217 B0217 B0217@ 3A0217@@ C0217+ 3B0217 3B0217 3B0217 D0217
PLATE, BELL HOUSING REAR MAIN LATE ----- ----- 2A0217@ ----- D0217+ ----- ----- ----- -----
CABLE, BELL HOUSING STABILIZING STAY B0218 B0218 B0218 ----- ----- ----- ----- ----- -----
BUSHING, STARTER IN BELL HOUSING B0660 B0660 B0660 B0660 B0660+ ----- ----- ----- -----
FLYWHEEL B0202 B0202 B0202 3A0202 3A0202+ 3B0202 3B0202 3B0202 3B0202
FLYWHEEL, LATE STYLE ----- ----- ----- ----- 3B0202+ ----- ----- ----- -----
GEAR, RING B0214 B0214 B0214 3A0214 3A0214+ 3B0214 3B0214 3B0214 3B0214
GEAR, RING LATE STYLE ----- ----- ----- ----- 3B0214+ ----- ----- ----- -----
DOWEL, FLYWHEEL** B0148 B0148 B0148 B0148 B0148 B0148 B0148 B0148 B0148
BUSHING, PILOT B0208 B0208 B0208 B0208 B0208 B0208 B0208 B0208 B0208
PLATE, PRESSURE B0203 B0203 B0203 B0203 B0203 B0203 B0203 B0203 B0203
DISK, CLUTCH B0204 B0204 B0204 B0204 B0204 B0204 B0204 B0204 B0204
BEARING, THROWOUT ONLY B0205 B0205 B0205 B0205 B0205 B0205 B0205 B0205 B0205
BEARING, THROWOUT & CARRIER B0206 B0206 B0206 B0206 B0206 B0206 B0206 B0206 B0206
CARRIER ONLY, CAST FOR B0205 BRG B0206-C B0206-C B0206-C B0206-C B0206-C B0206-C B0206-C B0206-C B0206-C
SPRING, THROWOUT BEARING RETURN B0215 B0215 B0215 B0215 B0215 B0215 B0215 B0215 B0215
CABLE, CLUTCH RELEASE B0207 B0207 2A0207 2A0207 2A0207 2A0207 2A0207 2A0207 2A0207
YOKE, CLEVIS FOR B0207 CABLE B0207-Y B0207-Y B0207-Y B0207-Y B0207-Y B0207-Y B0207-Y B0207-Y B0207-Y
FORK, CLUTCH (FOR THROWOUT BRG) B0209 B0209 B0209 B0209 B0209 B0209 B0209 B0209 B0209
STUD, CLUTCH FORK PIVOT ON TRANS B0701-STUD B0701-STUD B0701-STUD B0701-STUD B0701-STUD B0701-STUD B0701-STUD B0701-STUD B0701-STUD
PEDAL,CLUTCH EARLY (CAST PAD) B0210-E* B0210-E* ----- ----- ----- ----- ----- ----- -----
PEDAL, CLUTCH LATE(SHEETMETAL PAD) B0210-L* B0210-L* B0210-L* B0210-L* B0210-L* B0210-L* B0210-L* B0210-L* B0210-L*
ARM, CLUTCH PEDAL FORGED B0211 B0211 B0211 B0211 B0211 B0211 B0211 B0211 B0211
SPRING, PEDAL RETURN B0216 B0216 B0216 B0216 B0216 B0216 B0216 B0216 B0216
WASHER, PEDAL FLOOR SEAL** B0244-1 B0244-1 B0244-1 B0244-1 B0244-1 B0244-1 B0244-1 B0244-1 B0244-1
SPRING, PEDAL WASHER SEAL BACKUP** B0244-SPG B0244-SPG B0244-SPG B0244-SPG B0244-SPG B0244-SPG B0244-SPG B0244-SPG B0244-SPG
SHAFT, CLUTCH PEDAL PIVOT B0220 B0220 B0220 B0220 B0220 B0220 B0220 B0220 B0220
ROD, CLUTCH B0212 TO B0220 B0221 B0221 B0221 B0221 B0221 B0221 B0221 B0221 B0221
TUBE & LEVER CONTROL B0212 B0212 B0212 B0212 B0212 B0212 B0212 B0212 B0212
DISC, SPRING INSIDE B0212** B0212-DISC B0212-DISC B0212-DISC B0212-DISC B0212-DISC B0212-DISC B0212-DISC B0212-DISC B0212-DISC
FELT, SPRING INSIDE B0212** B0212-FELT B0212-FELT B0212-FELT B0212-FELT B0212-FELT B0212-FELT B0212-FELT B0212-FELT B0212-FELT
SEAL, (AT END OF B0212)** B0212-SEAL B0212-SEAL B0212-SEAL B0212-SEAL B0212-SEAL B0212-SEAL B0212-SEAL B0212-SEAL B0212-SEAL
SPRING, (INSIDE B0212)** B0212-SPG B0212-SPG B0212-SPG B0212-SPG B0212-SPG B0212-SPG B0212-SPG B0212-SPG B0212-SPG
STUD & BRACKET, TUBE & LEVER PIVOT B0219 B0219 B0219 B0219 B0219 B0219 B0219 B0219 B0219
STUD ONLY, TUBE & LEVER PIVOT B0219-S B0219-S B0219-S B0219-S B0219-S B0219-S B0219-S B0219-S B0219-S
PEDAL, BRAKE FOOT (EARLY CAST PAD) B1216-E B1216-E ----- ----- ----- ----- ----- ----- -----
PEDAL, BRAKE (SHEET METAL PAD) B1216-L B1216-L B1216-L B1216-L B1216-L B1216-L B1216-L B1216-L B1216-L
ARM, BRAKE PEDAL FORGED B1235 B1235 B1235 3A1235 3A1235 3A1235 3A1235 3A1235 3A1235
+ M38 HAD (2) DIFFERENT BELL HOUSINGS; (801628 OR 801629 TO S/N 74419; 804812 (D0201) AFTER S/N 74419 WHICH IS ALSO FOR M38A1) AS A RESULT M38'S ALSO HAD TWO DIFFERENT INSPECTION
COVERS, STARTERS, BELL HOUSING PLATES, RING GEARS, FLYWHEELS, & USED (B0660) UP THROUGH SN 74419.
++ CJ3B CJ5E CJ6E USED 2 BELL HOUSINGS; (802929 TO S/N 45142035,912799 AFTER ENGINE SERIAL NUMBER 4J-142035)
* B0210-E IS THE EARLY WWII STYLE CAST PEDAL. B0210-L IS THE LATE STYLE SHEET METAL PEDAL USED ON OTHER VEHICLES ALSO.
@ EARLY CJ2A UPTO S/N 49297 USED B0217 (A-5121); AFTER S/N 49297 USE 2A0217 (642280) UP TO LATE 1949, THEN USE 3A0217 (642237) @@ ALL CJ3A USE 3A0217 (642237)
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 8
GROUP 03: FUEL
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
TANK, FUEL EARLY(2-7/8" DIA.FILLER) B0301-E B0301-E ----- ----- ----- ----- ----- ----- -----
TANK, FUEL LATE (4-5/8" DIA.FILLER) B0301-L B0301-L ----- ----- ----- ----- ----- ----- -----
TANK ,FUEL (STANDARD STEEL) ---- ---- 2A0301 2A0301 C0301 2A0301 5E0301 5E0301 D0301
TANK, FUEL NON-RUST PLASTIC ---- ---- 2A0301-PL 2A0301-PL ---- 2A0301-PL 5E0301-PL 5E0301-PL ----
SEALER, SLOSHING TANK REPAIR (QT.) B2475-1 B2475-1 B2475-1 B2475-1 B2475-1 B2475-1 B2475-1 B2475-1 B2475-1
TUBE, EXTENTION FILLER NECK B0305 B0305 ----- ----- B0305 ----- ----- ----- B0305
SCREEN ONLY, TANK FILLER NECK B0304 B0304 ----- ----- B0304 ----- ----- ----- B0304
GROMMET, FUEL TANK NECK TO BODY ---- ---- 2A0320 2A0320 C0320 2A0320 2A0320 2A0320 C0320
GROMMET, FUEL TANK TO FLOOR BUFFER B0301-G B0301-G ----- ----- ----- ----- ----- ----- -----
GASKET KIT, FUEL TANK TO GAS WELL RUBBER B0301-FSKT B0301-FSKT ----- ----- ----- ----- ----- ----- -----
GASKET KIT, FUEL TANK TO GAS WELL FELT ---- G0301-FSKT ----- ----- ----- ----- ----- ----- -----
GASKET KIT, ALL OTHER FLOOR SEALS RUBBER B1803-KT-R B1803-KT-R ----- ----- ----- ----- ----- ----- -----
STRAP SET,HOLD DOWN TANK COMPLETE B0326 B0326 2A0326 2A0326 2A0326 2A0326 2A0326 2A0326 D0326
WELT KIT, FUEL TANK HOLD DOWN B0330 B0330 2A0330 2A0330 C0330 2A0330 2A0330 2A0330 D0330
WELT KIT, FUEL TANK/FLOOR PAN B0331 B0331 2A0331 2A0331 C0331 2A0331 2A0331 2A0331 D0331
CAP, FUEL TANK EARLY 2-7/8" DIA B0302-EN B0302-EN 2A0302 2A0302 ---- 5E0302 5E0302 5E0302 ----
CAP, FUEL TANK 4-5/8" DIA; MLITARY STD B0302-L B0302-L ----- ----- C0302-T ---- ----- ----- C0302-T
GASKET, FUEL TANK CAP B0302-G B0302-G ----- ----- B0302-G ----- ----- ----- B0302-G
SENDER ,FUEL TANK B0303-R B0303-R 2A0303 2A0303 C0303 2A0303 5E0303 5E0303 D0303
PROTECTOR,FUEL SENDER HEAD STEEL B0303-PSTL B0303-PSTL B0303-PSTL B0303-PSTL ----- B0303-PSTL ----- ----- -----
GASKET, SENDER HEAD TO TANK B0303-G B0303-G B0303-G B0303-G B0303-G B0303-G 5E0303-G 5E0303-G B0303-G
FILTER FUEL LARGE AC MILITARY WWII B0306 B0306 ----- ----- ----- ----- ----- ----- -----
FILTER, FUEL (INSIDE TANK) REPLACEMENT ----- ----- ----- ----- C0335-R ----- ---- ----- D0335-R
FILTER HEAD ASS'Y FOR IN TANK FILTERS ----- ----- ----- ----- C0301-PU ----- ---- ----- D0301-PU
FILTER HEAD GASKET (C0301PU & D0301-PU)----- ----- ----- ----- C0301-PUG ----- ---- ----- C0301-PUG
GASKET SET, FUEL FILTER B0306-G B0306-G ----- ----- ----- ----- ----
B0306 ----- -----
ELEMENT, FUEL FILTER STRAINER AC B0322 B0322 ----- ----- ----- ----- ---- ----- -----
FITTING, BRASS FUEL FLARE 90 DEG B0307-FIT B0307-FIT 2A0307-FIT 2A0307-FIT 2A0307-FIT 2A0307-FIT 2A0307-FIT 2A0307-FIT 2A0307-FIT
PUMP, FUEL B0307 B0307 2A0307 3A0307 C0307+ 3A0307 3A0307 3A0307 C0307+
REBUILD KIT, FUEL PUMP B0316 B0316 B0316 ---- ---- ---- ---- ---- ----
CARBURETOR,REBUILT W/ EXCHANGE* B0308-R B0308-R B0308-R B0308-R C0308-R 3B0308-R 3B0308-R 3B0308-R D0308-R
CARBURETOR, NEW SOLEX REPLACM'T* B0308-S B0308-S B0308-S B0308-S B0308-S 3B0308-S 3B0308-S 3B0308-S 3B0308-S
REBUILD KIT, CARTER CARBURETOR B0309 B0309 B0309 B0309 C0309 3B0309 3B0309 3B0309 D0309
MASTER REBUILD KIT, CARTER CARB B0309-MK B0309-MK B0309-MK B0309-MK ----- ----- ---- ----- -----
REBUILD KIT, SOLEX CARBURETOR B0309-S B0309-S B0309-S B0309-S B0309-S 3B0309-S 3B0309-S 3B0309-S 3B0309-S
GASKET, CARBURATOR BASE B0310-D B0310-D B0310-D B0310-D B0310-D 3B0310 3B0310 3B0310 3B0310
HORN,CARBURETOR AIR INTAKE B0311 B0311 B0311 B0311 ---- 3B0311 3B0311 3B0311 ----
SEAL, RUBBER; B0311 TO CARB MOUTH B0311-SEAL B0311-SEAL B0311-SEAL B0311-SEAL ---- ---- ---- ---- ----
CLAMP,CARBURETOR AIR INTAKE HORN B0546-15 B0546-15 B0546-15 B0546-15 ---- ---- ---- ---- ----
TUBE, AIR INTAKE CROSSOVER B0312 B0312 B0312 B0312 C0312 ----- ----- ----- D0312
TUBE, CROSSOVER EARLY NO PCV VENT B0312-E B0312-E ----- ----- ----- ----- ----- ----- -----
CLEANER, AIR EARLY WWII AC B0313-E B0313-E ----- ----- ----- ----- ----- ----- -----
CLEANER, AIR ASSEMBLY B0313** B0313** B0313** B0313** C0313** 3B0313 3B0313 3B0313 D0313
CLEANER, AIR; UNORIGINAL W/ ELEMENT*** B0313-R B0313-R B0313-R B0313-R B0313-R B0313-R B0313-R B0313-R B0313-R
ELEMENT, REPLACEMENT FOR B0313-R*** B0313-R-EMT B0313-R-EMT B0313-R-EMT B0313-R-EMT B0313-R-EMT B0313-R-EMT B0313-R-EMT B0313-R-EMT B0313-R-EMT
BRACKET, AIR CLEANER MOUNT RIGHT B0323-R G0323-R B0323-R B0323-R C0323-R ----- ----- ----- -----
BRACKET, AIR CLEANER MOUNT LEFT B0323-L G0323-L B0323-L B0323-L C0323-L ----- ----- ----- -----
THUMBSCREW, AIR CLEANER ATTACH B0334 B0334 B0334 B0334 ---- B0334 B0334 B0334 ----
GASKET KIT, AIR CLEANER (OAKES) B0313 B0313-G B0313-G B0313-G ---- B0313-G ---- ---- ---- ----
HOSE, FLEXIBLE AIR INTAKE~ B0314 B0314 B0314 B0314 C0314 3B0314 3B0314 3B0314 C0314
CLAMP FOR AIR INTAKE HOSE B0546-SI B0546-SI B0546-SI B0546-SI B0546-SI D0546-18 D0546-18 D0546-18 B0546-SI
THROTTLE ASS’Y, HAND B0318 G0318^ 2A0318 2A0318 B0318 2A0318 2A0318 2A0318 D0318
CHOKE ASS’Y, HAND B0319 G0319^^ 2A0319 2A0319 B0319 2A0319 2A0319 2A0319 B0319
CABLE NUT, HAND CHOKE\THROTTLE B0318-CN B0318-CN B0318-CN B0318-CN B0318-CN B3018-CN B0318-CN B0318-CN B0318-CN
PEDAL, ACCELERATOR (GAS) B0324 B0324 B0324 B0324 C0324 3B0324 3B0324 3B0324 3B0324
BOOT, GAS PEDAL LINKAGE LEATHER B0317-L B0317-L B0317-L ---- ---- ---- ---- ---- ----
BOOT, GAS PEDAL LINKAGE RUBBER B0317-R B0317-R B0317-R B0317-R B0317-R B0317-R B0317-R B0317-R B0317-R
SPRING, GAS PEDAL RETURN (3/8" DIA.) B0338 B0338 B0338 B0338 B0338 B0338 B0338 B0338 B0338
SPRING, GAS PEDAL RETURN (5/8" DIA.) B0338-LD B0338-LD B0338-LD B0338-LD B0338-LD B0338-LD B0338-LD B0338-LD B0338-LD
KNOB, FOOT REST NEXT TO GAS PEDAL B1827 B1827 B1827 B1827 B1827 B1827 B1827 B1827 B1827
CONTROL CABLE, FORDING ---- ---- ---- ---- C0328 ---- ---- ---- C0328
SPOUT, JERRYCAN ORIGINAL CAM TYPE B0329 B0329 B0329 B0329 B0329 B0329 B0329 B0329 B0329
SPOUT, JERRYCAN SCREW ON TYPE B0329-R B0329-R B0329-R B0329-R B0329-R B0329-R B0329-R B0329-R B0329-R
BAG, JERRYCAN SPOUT CANVAS B2362 B2362 B2362 B2362 B2362 B2362 B2362 B2362 B2362
CAN, SPARE JERRY NEW B0332 B0332 B0332 B0332 B0332 B0332 B0332 B0332 B0332
GASKET, JERRYCAN CAP B0333 B0333 B0333 B0333 B0333 B0333 B0333 B0333 B0333
FUEL LINE KIt, PRE-BENT STEEL PORTIONS B0337 B0337 2A0337 2A0337 C0337 3B0337 5E0337 5E0337 D0337
FUEL LINE KIT, UN-BENT STEEL PORTIONS ---- ---- 2A0337-UB 2A0337-UB ---- 3B0337-UB 3B0337-UB 3B0337-UB ----
LINE, IN-LINE FLEX FUEL HOSE B0315 B0315 2A0315 2A3015 2A0315 2A0315 2A0315 2A0315 2A0315
CLIP, KIT FUEL LINE METAL (GENERIC) B0339 B0339 B0339 B0339 B0339 B0339 B0339 B0339 B0339
LINKAGE, THROTTLE (ENGINE REAR) B0340 B0340 B0340 B0340 C0340 ---- ---- ---- ----
* CORE CREDITS ALLOWED ON SOME CARBURETORS. + 3A0307 IS A GOOD CIVILIAN SUBSTITUTE FOR C0307 WITH A VACUUM CANISTER BUT NO PRIMER HANDLE.
** MB, GPW, CJ2A, CJ3A & M38 USED OAKES B0313 AIR CLEANERS. CJ2A & CJ3A ALSO USED DONALDSON AIR CLEANERS 2A0313. THEY ARE INTERCHANGEABLE.
B0313, 2A0313, & C0313 ARE PHYSICALLY INTERCHANGEABLE.
*** B0313-R IS A MODERN REPLACEMENT AIR CLEANER THAT BOLTS TO THE CARB MOUTH. IT USES A REPLACEABLE AIR FILTER B0313-R-E.
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 9
GROUP 03: FUEL
B0311
ORDER NUMBERS
B0546-15 B0318
1. B0318 (HAND CHOKE) B0336
2. B0319 (HAND THROTTLE)
5. B0318-CN (CABLE NUT)
B0319
7. B0338 or B0338-LD
(RETURN SPRING) B0308-R
12. B1827 (FOOT REST) B0308-S
13. B0324 (PEDAL) MB & GPW
SYSTEM SHOWN. OTHER
MILITARY JEEPS USED
SIMILAR , BUT NOT IDENTI-
CAL ARRANGEMENTS.
USE THESE DRAWINGS AS
B0545-2
B0546-15 GUIDES.
B0545-E*
B0545-L* B0546*
B0546-3 B0311
B0546* B0317-L
B0317-R
B0312
B0545-5
B0545-E* B0338
B0545-L* B0318-CN B0338-LD B0324
B0340
B0310-D
MB or GPW B1827
B0301-EH (2-7/8" Dia. Filler)
B0301-LH (4-5/8" Dia. Filler)
B0306
(2-7/8" Dia. Filler)
B0315
B0337* B0301-EH
B0307-FIT B0301 -LH
CJ2A CJ3A CJ3B
2A0301 or 2A0301-PL
CJ5 or CJ6 B0337
5E0301 or 5E0301-PL
B0303-R
B0303-G
M38
C0301 (4-5/8" Dia. Filler) B0307-FIT
B0302-E
B0302-L
B0302-G
B0307 B0304
2A0307 B0305
B0308-R
B0337 B0308-S
M38A1
D0301 (4-5/8" Dia. Filler) *NOTE: This kit includes the individual part listed directly above & shown in this drawing
Copyright 2005 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-1000 Page 10
GROUP 04: EXHAUST
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
CLAMP & HANGER KIT, EXHAUST B0402 B0402 2A0402 2A0402 C0402 2A0402 2A0402 2A0402 C0402
CLAMP & HANGER KIT, EARLY(RND.MUFF) B0402-E* B0402-E* ---- ---- ---- ---- ---- ---- ----
STUD KIT, MANIFOLD INTAKE/EXHAUST B0108-SK B0108-SK B0108-SK B0108-SK B0108-SK 3B0108-SK 3B0108-SK 3B0108-SK 3B0108-SK
PIPE, FRONT CURVED MANIFOLD B0403 B0403 2A0403 2A0403 C0403 2A0403 2A0403 2A0403 C0403
PIPE, LONG FRONT TO REAR EXTENSION ----- ----- 2A0404 2A0404 C0404 2A0404 2A0404 6E0404 C0404
MUFFLER, STANDARD PRODUCTION STYLE B0405 B0405 2A0405 2A0405 C0405 2A0405 2A0405 2A0405 C0405
MUFFLER, EARLY ROUND STYLE B0405-E* B0405-E* ---- ---- ---- ---- ---- ---- ----
PIPE, TAIL ----- ----- 2A0406 2A0406 ---- 2A0406 2A0406 2A0406 ----
GASKET, FRONT PIPE TO MANIFOLD B0410 B0410 B0410 B0410 B0410 B0410 B0410 B0410 B0410
GASKET, EXHAUST PIPE (TRIANGULAR) ----- ----- ----- ----- C0415 ----- ----- ----- C0415
ORDER B0410
B0405 (OVAL) GASKET TO
ATTACH B0403
TO EXHAUST
MANIFOLD
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 11
GROUP 05: COOLING
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
RADIATOR, BOTTOM MOUNT B0501 G0501 2A0501 2A0501* ---- ---- ---- ---- ----
RADIATOR, SIDE MOUNT TO GRILL ---- ---- ---- 3A0501-SM* C0501 3B0501 5E0501 5E0501 D0501
PETCOCK, DRAINAGE COOLING SYSTEM B0501-PC B0501-PC B0501-PC B0501-PC B0501-PC B0501-PC B0501-PC B0501-PC B0501-PC
CAP, RADIATOR B0512 B0512 B0512 B0512 B0512 B0512 B0512 B0512 B0512
WELT KIT, RADIATOR TO FRAME MOUNT B1540-RAD B1540-RAD B1540-RAD B1540-RAD* ---- ---- ---- ---- ----
PUMP, WATER W/ SINGLE GROOVE PULLEY (6 OR 12V JEEPS) B0502 B0502 2A0502 2A0502 2A0502^ 2A0502 2A0502 2A0502 2A0502^
PUMP, WATER W/ DUAL GROOVE PULLEY (24V JEEPS) ---- ---- ---- ---- C0502^ ---- ---- ---- C0502^
PULLEY FOR WATER PUMP WITH B0504 SINGLE FAN BELT B0511 B0511 B0511 B0511 B0511^ B0511 B0511 B0511 B0511^
PULLEY FOR WATER PUMP WITH C0504 DOUBLE FAN BELT ---- ---- ---- ---- C0511^ ---- ---- ---- C0511^
PULLEY, CRANK FOR (6v or 12V) B0504 SINGLE FAN BELT B0156 B0156 2A0156 2A0156 2A0156^ 2A0156 2A0156 2A0156 2A0156^
PULLEY, CRANK FOR (24V) C0504 DOUBLE FAN BELTS ---- ---- ---- ---- C0156^ ---- ---- ---- C0156^
BELT, FAN FOR B0502 OR 2A0502 PUMPS (6V & 12V) B0504 B0504 B0504 B0504 B0504^ B0504 B0504 B0504 B0504^
BELTS, FAN (PAIR) FOR C0502 PUMPS (24V) ---- ---- ---- ---- C0504^ ---- ---- ---- C0504^
GASKET, WATER PUMP B0502-G B0502-G B0502-G B0502-G B0502-G B0502-G B0502-G B0502-G B0502-G
GASKET & SEALS, WATER PUMP REBUILD B0503-R B0503-R B0503-R B0503-R B0503-R B0503-R B0503-R B0503-R B0503-R
FAN ASSEMBLY B0510 B0510 B0510 B0510 B0510 B0510 B0510 B0510 B0510
THERMOSTAT B0507 B0507 B0507 B0507 B0507 B0507 B0507 B0507 B0507
HOUSING, THERMOSTAT CASTING B0508 G0508 B0508 B0508 B0508 3B0508 3B0508 3B0508 3B0508
GASKET, THERMOSTAT B0509 B0509 B0509 B0509 B0509 3B0509 3B0509 3B0509 3B0509
RETAINER, THERMOSTAT MOUNT IN B0508 OR G0508 B0516 B0516 B0516 B0516 B0516 ---- ---- ---- ----
HOSE KIT, ALL RUBBER BOTTOM MOUNT RADIATOR B0545-E@ B0545-E@ B0545-E@ B0545-E@ ---- ---- ---- ---- ----
HOSE KIT, (SPACERS NEEDED) BOTTOM MOUNT RADIATOR B0545-L@ B0545-L@ B0545-L@ ---- ---- ---- ---- ---- ----
TUBE, LOWER METAL CURVED SPACER B0513** B0513** B0513** ---- ---- ---- ---- ---- ----
TUBE, UPPER METAL STRAIGHT SPACER B0514** B0514** B0514** ---- ---- ---- ---- ---- ----
HOSE KIT FOR SIDE MOUNT TO GRILL RADIATORS ---- ---- ---- 3A0545-SM* C0545 3B0545 5E0545 5E0545 D0545
HOSE, 2-1/4" DIA. x1 1/2" CROSSTUBE TO CARB HORN B0545-2+ B0545-2+ B0545-2+ B0545-2+ ---- ---- ---- ---- B0545-2+
HOSE, 5" OFFSET CROSSTUBE TO CARB HORN ---- ---- ---- ---- C0545-5 ---- ---- ---- ----
HOSE, OIL FILLER TUBE TO CROSSTUBE (B0312) B0545-5+ B0545-5+ B0545-5+ B0545-5+ B0545-5+ B0545-5+ B0545-5+ B0545-5+ B0545-5+
HOSE,SMALL CURVED BY-PASS 90 DEGREE ---- ---- ---- ---- C0545-B C0545-B C0545-B C0545-B C0545-B
CLAMP KIT, HOSE ENGINE COMPARTMENT B0546 B0546 B0546 B0546 C0546 3B0546 3B0546 3B0546 D0546
CLAMP, HOSE OIL FILLER TO CROSSTUBE B0546-3+++ B0546-3+++ B0546-3+++ B0546-3+++ B0546-3+++ B0546-3+++ B0546-3+++ B0546-3+++ B0546-3+++
CLAMP, CARB HORN (B0311) TO CARB B0546-15++ B0546-15++ B0546-15++ B0546-15++ B0546-15++ ---- ---- ---- ----
BAG,CANVAS WATER SPOUT RAD. FILL B2398 B2398 B2398 B2398 B2398 B2398 B2398 B2398 B2398
HAIR KIT, RADIATOR GRILL B1732 B1732 2A1732 2A1732* C1732 ---- ---- ---- ----
**USE WITH B0545-L KIT AS SHOWN BELOW.
*LATE CJ3A STARTED USING A SIDE MOUNT TO GRILL RATHER THAN BOTTOM MOUNT RADIATOR AFTER S/N 21656; ONLY BOTTOM MOUNT RADIATOR NEEDS B1540-RAD OR 2A1732.
B0501, G0501, 2A0501 RADIATORS ARE BOTTOM MOUNT STYLES
^ 24 VOLT SYSTEM ’M’ SERIES JEEPS USED (2) FAN BELTS. ORDER (1) PAIR OF BELTS C0504 PER VEHICLE. IF THE VEHICLE WAS CONVERTED TO 6 OR 12 VOLT, USE (1) B0504.
@EARLY CJ2A USED B0545-L MB H0SE KITS UP TO S/N 170064. B0545-L REQUIRES B0513,B0514 METAL SPACERS,
BO545-E REQUIRES NO METAL SPACERS, THEY ARE FULL RUBBER HOSE DESIGN.
+ ALSO PART OF KITS B0545-E, B0545-L, 3A0545-SM, & D0545
++ ALSO PART OF KITS B0546, C0546 & D0546, +++ ALSO PART OF B0546, C0546, D0546 & 3B0546
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 12
GROUP 06: ELECTRICAL
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
B0601-41** : 1941 TO MID 1942; EARLY "FORD OR WILLYS SCRIPT" REAR PANEL JEEPS;
NO TRAILER SOCKET, HAS FIREWALL FILTERETTE, NO FENDER BLACKOUT LIGHT
B0601 *: MID-1942 TO 1944 STANDARD WAR PRODUCTION JEEPS WITH JERRY CAN ON REAR PANEL;
HAS TRAILER SOCKET, HAS FIREWALL FILTERETTE, HAS FENDER BLACKOUT LIGHT
B0601-44 ***: 1944 TO 1945 LATE WAR JEEPS WITH JERRY CAN & LATE WAR CHANGES;
HAS TRAILER SOCKET, NO FIREWALL FILTERETTE, HAS FENDER BLACKOUT LIGHT
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 13
GROUP 06: ELECTRICAL
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
2A0634-6 OR -12
B0634-6 or -12 "SHORT TRUMPET" B0634-R
"LONG TRUMPET" 1945 MB GPW CJ2A CJ3A CJ3B CJ5 CJ6
1941-45 MB GPW 1945-49 CJ2A FITS ALL 6V OR 12V JEEPS
HORN, "ORIGINAL" STYLE 6V B0634-6 B0634-6 2A0634-6 2A0634-6 ---- 2A0634-6 2A0634-6 2A0634-6 ----
HORN, "ORIGINAL" STYLE 12V B0634-12 B0634-12 2A0634-12 2A0634-12 2A0634-12 2A0634-12 2A0634-12 2A0634-12 2A0634-12
HORN, STEEL "PANCAKE" STYLE 6V B0634-R B0634-R B0634-R B0634-R B0634-R B0634-R B0634-R B0634-R B0634-R
HORN, STEEL "PANCAKE" STYLE 12V B0634-R B0634-R B0634-R B0634-R B0634-R B0634-R B0634-R B0634-R B0634-R
HORN, ORIGINAL STYLE 24V ---- ---- ---- ---- C0634-24 ---- ---- ---- C0634-24
BRACKET, HORN MOUNT STANDARD B0634-BKT B0634-BKT 2A0634-BKT 2A0634-BKT C0634-BKT 2A0634-BKT 2A0634-BKT 2A0634-BKT D0634-BKT
BRACKET, HORN MOUNT EARLY FIREWALL ---- ---- B0634-BKT ---- ---- ---- ---- ---- ----
BRUSH, HORN STEERING COLUMN SIDE B0635 B0635 B0635 ---- ---- ---- ---- ---- ----
SWITCH, HORN AT BOTTOM STG COL ---- ---- ---- ---- C0635 ---- ---- ---- C0635
BREAKER, CIRCUIT 5-AMP FUEL B0636 B0636 ---- ---- ---- ---- ---- ---- ----
BREAKER, CIRCUIT 15-AMP FUEL OR HORN B0637 B0637 ---- ---- ---- ---- ---- ---- ----
BREAKER, CIRCUIT 24-VOLT M-SERIES ---- ---- ---- ---- C0636-24 ---- ---- ---- C063-24
BUTTON KIT, HORN (TOP OF COLUMN) SMALL B0638 B0638 B0638 B0638 C0638 3B0638** 3B0638** 3B0638** C0638
BUTTON KIT, HORN (LARGE 2-3/8"DIA BUTTON) ---- ---- ---- ---- ---- ---- 5L0638 5L0638 ----
CAP, RUBBER HORN BUTTON FOR C0638-N ---- ---- ---- ---- C0638-C C0638-C C0638-C C0638-C C0638-C
NUT FOR HORN BUTTON CAP C0638-C ---- ---- ---- ---- C0638-N C0638-N C0638-N C0638-N C0638-N
**GOOD PRACTICAL REPLACEMENT FOR C0638-C CAP, C0638-N NUT, C0638-ROD, & C0617 SWITCH ON AN M38, M38A1, OR M170.
B/O=BLACKOUT T/O=TAKEOUT OR USED OLD STOCK NOS=NEW OLD STOCK W/O=WITHOUT W/=WITH
"LIGHT" USUALLY REFERS TO COMPLETE LIGHT ASS’Y (BULB AND BUCKET ). "LAMP" OR "BULB" USUALLY REFERS TO BULB ONLY.
*USE B0610 ON CJ2A'S UP THROUGH SERIAL NUMBER 47099, AND 3A0610 AFTER S/N 47099.
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 14
WWII BLACKOUT LIGHTING SYSTEM
B0675-6 (6 volt) or B0675-12 (12 volt) (INCLUDED) B0676-6 (6 volt) or B0676-12 (12 volt) (INCLUDED)
B0677-6 (6 volt) or B0677-12 (12 volt) (INCLUDED) B0677-6 (6 volt) or B0677-12 (12 volt) (INCLUDED)
DRIVER SIDE TAIL LIGHT ASSEMBLY PASSENGER SIDE TAIL LIGHT ASSEMBLY
B06WT-6L (6 volt) or B06WT-12L (12 volt) B06WT-6R (6 volt) or B06WT-12R (12 volt)
B0608-BKT
(part of B/O
LIGHT assem-
bly)
PART OF B0662-B
(Harness Not Included) MB, GPW
&WWII VEHICLES
BLACKOUT
LIGHTING
SYSTEM
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 15
GROUP 06: ELECTRICAL
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 16
GROUP 06: ELECTRICAL
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 17
ORIGINAL STYLE LIGHT SPOTTERS GUIDE
VEHICLE DRIVER TAIL PASSENGER TAIL DASH GRILL LENS RING SOCKET
MB
GPW -------- -------- --------
& WWII
6V: B06WT-6L 6V: B06WT-6R
VEHICLES 12V: B06WT-12L 12V: B06WT-12R B0616 (6 OR 12V) B0604 (6 OR 12V)
M38
M38A1
M170
M151 & -------- -------- --------
M-SERIES
DOUGLASS CONNECTORS: C0613 C0614 C0616 C0604
PACKARD CONNECTORS: E0613 E0614 E0616-T E0604
(ANY VOLTAGE)
CJ2A
1945 TO
MID-1946 WITH
"BULLET" --------
GRILL LIGHTS
2A0613 2A0614 (OPTIONAL) 2A0616 2A0604 2A0607-E 2A0606-E
(ANY VOLTAGE) 2A0607-EG
2A0607-EO
CJ2A
MID-1946 TO 49
& ALL CJ3A --------
WITH "FLUSH"
GRILL LIGHTS
2A0613 2A0614 (OPTIONAL) 2A0616 2A0607 2A0606 B0616-SOCKET
(ANY VOLTAGE)
1950'S
CJ3B CJ5 CJ6
WITH SMALL -------- --------
"BEEHIVE" 2A0616
3B0607-S 3B0606-S
GRILL LIGHTS 2A0613
(EARLY CJ3B ONLY
2A0614 WITH 5-GAUGE DASHBOARD) (2-1/4" OD) (2-13/16" OD)
(ANY VOLTAGE)
1950'S
CJ3B CJ5 CJ6
WITH LARGE -------- --------
"BEEHIVE" 2A0616
(EARLY CJ3B ONLY
GRILL LIGHTS 3B0607-L 3B0606-L
(ANY VOLTAGE) 2A0613 2A0614 WITH 5-GAUGE DASHBOARD) (2-3/4" OD) (3-1/2" OD)
1960'S
CJ3B CJ5 CJ6 (5E0604) USES B0613-6RBULB,
WITH LATE B0613-12RBULB, OR B0613-24RBULB
ORANGE -------- -------- -------- --------
GRILL LIGHTS
& LARGE 5E0626
SPEEDOMETER B0613-R B0613-R 5E0604 (CAN BE FLUSH MOUNTED TO ANY GRILL
(ANY VOLTAGE) TURN SIGNAL APPLICATIONS)
NOTE: MOST OF THESE TAIL LIGHTS & SOME GRILL LIGHTS ARE INTERCHANGEABLE BETWEEN VEHICLES. THE
1960'S LIGHTING IS A GREAT WAY TO SAFELY UPGRADE OLDER LIGHTING SYSTEMS. CHECK YOUR LOCAL STATE LAWS.
ALL TAIL LIGHTS ABOVE CAN BE WIRED AS A TURN SIGNAL LIGHT EXCEPT FOR MB & GPW WWII LIGHTS.
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 18
GROUP 06: ELECTRICAL
ORIGINAL STYLE FRONT GRILL LIGHTS
LIGHT or BULB ORDER NUMBER
VEHICLE DESCRIPTION SOCKET RPV 6V 12V 24V LENS RING
MB GPW & WWII VEHICLES B/O LIGHT B0604 2 B0670-6 B0670-12 C0670-24 ---- ----
M38 M38A1 M170 & 'M'-SERIES B/O LIGHT C0604 2 B0670-6 B0670-12 C0670-24 ---- ----
M151 JEEPS & M-SERIES B/O LIGHT E0604 2 B0670-6 B0670-12 C0670-24 ---- ----
CJ2A 1945 TO EARLY 1946 PARKING LIGHT 2A0604^ 2 B0670-6 B0670-12 C0670-24 2A0607-E^ 2A0606-E
(BULLET STYLE LIGHT) 2A0607-EG^ 2A0606-E
2A0607-EO^ 2A0606-E
CJ2A 1946-49 & ALL CJ3A PARKING LIGHT B0616-SOCKET^ 2 B0669-6 B0669-12 C0669-24 2A0607 2A0606
(FLUSH MOUNTED STYLE)
CJ3B SMALL PKG B0616-SOCKET 2 B0669-6 B0669-12 C0669-24 3B0607-S* 3B0606-S+
(CLEAR BEEHIVE LENS) LARGE PKG B0616-SOCKET 2 B0669-6 B0669-12 C0669-24 3B0607-L** 3B0606-L++
CJ5 CJ6 1950'S SMALL PKG B0616-SOCKET 2 B0669-6 B0669-12 C0669-24 3B0607-S* 3B0606-S+
(CLEAR BEEHIVE LENS) LARGE PKG B0616-SOCKET 2 B0669-6 B0669-12 C0669-24 3B0607-L** 3B0606-L++
CJ5 CJ6 1960'S ORANGE PKG 5E0604 2 B0613-6RBULB B0613-12RBULB B0613-24RBULB ---- ----
(AMBER PLASTIC LENS)
UNLESS NOTED, GRILL MOUNTED PARKING/BLACKOUT LIGHTS ARE NOT SUPPLIED W/ BULBS. YOU MUST ORDER THEM SEPARATELY.
^BOTH 2A0604 & 2A0604-DF ARE SUPPLIED WITH AMBER LENS.
ORDER 2A0607-E FOR A CLEAR PLASTIC LENS; 2A0607-O FOR AMBER (ORANGE)PLASTIC LENS; 2A0607-EG FOR MILK GLASS LENS.
*= 2-1/4" OD **= 2-3/4" OD += 2-13/16" OD ++= 3-1/2" OD
B/O=BLACKOUT T/O=TAKEOUT PKG=PARKING LIGHT
M38 M38A1 M170 PASSENGER SIDE B/O NEW C0614 UPPER SMALL B0670-6 B0670-12 C0670-24
M151 & M-SERIES B0677-6 PASSENGER SIDE B/O NEW E0613 LOWER SMALL B0670-6 B0670-12 C0670-24
B0677-12
CJ2A CJ3A ;1950'S CJ3B/5/6 DRIVER SIDE 2A0613 ---- B0613-6RBULB B0613-12RBULB B0613-24RBULB
CJ2A CJ3A; 1950'S CJ3B/5/6 PASSENGER SIDE 2A0614 ---- B0613-6RBULB B0613-12RBULB B0613-24RBULB
C0675-6
CJ2A CJ3A ;1960'S CJ3B/5/6 DRIVER SIDE B0613-R ---- C0675-12 B0613-6RBULB B0613-12RBULB B0613-24RBULB
CJ2A CJ3A ;1960'S CJ3B/5/6 PASSENGER SIDE B0613-R ---- C0675-24 B0613-6RBULB B0613-12RBULB B0613-24RBULB
B0613-6RBULB
ALL VEHICLES (DRIVER OR PASS SIDE)REPLACEMENT TAILIGHT B0613-R ----
B0613-12RBULB B0613-6RBULB B0613-12RBULB B0613-24RBULB
B0613-24RBULB B/O=BLACKOUT
DASHBOARD LIGHTS & BULBS T/O=TAKEOUT
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 19
SPEEDOMETERS
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
WWII EARLY FACE WITH TRIP ODOMETER B0626-E B0626-E ---- ---- ---- ---- ---- ---- ----
WWII LATE FACE WITH TRIP ODOMETER B0626-L B0626-L ---- ---- ---- ---- ---- ---- ----
POST-WAR WITHOUT TRIP ODOMETER C0626 C0626 2A0626 2A0626 C0626 2A0626* ---- ---- C0626
POST-WAR WITHOUT TRIP ODOMETER T/O C0626-T C0626-T C0626-T C0626-T C0626-T C0626-T* ---- ---- C0626-T
GAUGE CLUSTER, LARGE CIVILIAN STYLE (SPEEDO & GAUGES IN ONE) ---- ---- ---- 5E0626* 5E0626* 5E0626* ----
CABLE, SPEEDOMETER B0627 B0627 B0627 B0627 C0627 B0627 B0627 B0627 C0627
TRANSFERCASE NUT FOR SPEEDOCABLE B0832-NUT B0832-NUT B0832-NUT B0832-NUT C0832-NUT B0832-NUT B0832-NUT B0832-NUT C0832-NUT
GEAR, SPEEDOMETER (DRIVEN) B0832 B0832 2A0832 2A0832 C0832 2A0832 2A0832 2A0832 C0832
*LATE 1960'S CJ3B'S USED THE SINGLE LARGE CJ5 STYLE 5E0626 SPEEDOMETER/INSTRUMENT CLUSTER WHICH INCLUDES ALL ACCESSORY GAUGES INSIDE OF
SPEEDOMETER UNIT. EARLY 1950'S CJ3B'S USED SEPARATE SPEEDOMETER AND DASH GAUGES. SEE GROUP 8 FOR TRANSFER CASE SPEED DRIVE GEARS.
MB GPW CJ2A CJ3A, EARLY CJ3B*, M38 M38A1 M170 TEMP MECHANICAL 100-265 DEGREES 1 B0629-SW B0629-SW B0629-SW
MB GPW CJ2A CJ3A, EARLY CJ3B*, M38 M38A1 M170 FUEL# 1 ----- B0630-12RSW -----
MB GPW CJ2A CJ3A, EARLY CJ3B*, M38 M38A1 M170 FUEL TANK SENDER# 1 B0303-R B0303-R -----
MB GPW CJ2A CJ3A, EARLY CJ3B*, M38 M38A1 M170 FUEL TANK SENDER GASKET 1 B0303-G B0303-G B0303-G
MB GPW CJ2A CJ3A, EARLY CJ3B*, M38 M38A1 M170 OIL MECH. 5-80 PSI(NEEDS B0631-RTUBE) 1 B0631-SW* B0631-SW* B0631-SW*
MB GPW CJ2A CJ3A, EARLY CJ3B*, M38 M38A1 M170 B0631-SW OIL GAUGE TUBING KIT* 1 B0631-RTUBE B0631-RTUBE B0631-RTUBE
MB GPW CJ2A CJ3A, EARLY CJ3B*, M38 M38A1 M170 OIL ELECTRICAL (NEEDS B0632-12 ) 1 ----- B0631-12RSW -----
MB GPW CJ2A CJ3A, EARLY CJ3B*, M38 M38A1 M170 OIL ELECTRICAL SENDER# 1 ----- B0632-12 -----
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 20
GROUP 06: ELECTRICAL
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
M38 M38A1 M170 HEADLIGHT SHELL C0662-B 2 2A0603-6 2A0603-12 C0603-24, E0603-24 C0690
M38 M38A1 M170 3-HOLE GROMMET C0662-BG 2 ---- ---- ---- ----
B0603-6
CJ2A CJ3A HEADLIGHT SHELL (BUCKET) 2A0662-B ,- BT 2 2A0603-6 2A0603-12 C0603-24, E0603-24 2A0690
B0603-12
CJ3B CJ5 CJ6 HEADLIGHT SHELL 2A0662-B ,- BT 2 2A0603-6 2A0603-12 C0603-24, E0603-24 3B0690
C0603-24
M38 M38A1 M170 M151 TEMPERATURE 120-240 DEGREES (NOS) 1 ----- ----- C0629-24 E0629-24
M38 M38A1 M170 M151 TEMPERATURE 120-240 DEGREES (TAKEOUT) 1 ----- ----- C0629-24T E0629-24T
M38 M38A1 M170 M151 TEMPERATURE SENDER 1 ----- -----
C0601-PM-DF C0633-24 E0633-24
E or C0629-24
(FEMALE BAYO-
M38 M38A1 M170 M151 E or C0629-24T FUEL (NEW)# 1 ----- ----- C0630-24 E0630-24
NETTE)
M38 M38A1 M170 M151 FUEL (NOS)# 1 ----- ----- C0630-24N E0630-24
M38 M38A1 M170 M151 FUEL (TAKEOUT)# 1 ----- ----- C0630-24T E0630-24T
M38 M151 FUEL TANK SENDER (24V WATERPROOF)# 1 ----- ----- C0303 E0303
M38A1 M170 FUEL TANK SENDER (24V WATERPROOF)# 1 ----- ----- D0303 D0303-SLIP
MB GPW FUEL TANK SENDER (6 OR 12v)# 1 B0303-R B0303-R ---- ----
CJ2A CJ3A CJ3B* FUEL TANK SENDER (6 OR 12v)# 1 2A0303 2A0303 ---- ----
CJ5 CJ6* FUEL TANK SENDER (6 OR 12v)# 1 5E0303 5E0303 ---- ----
M38 M38A1 M170 M151 E or C0630-24 FUEL TANK SENDER GASKET 1 B0303-G B0303-G B0303-G B0303-G
E or C0630-24N
M38 M38A1 M170 M151 E or C0630-24T OIL (NEW) 1 ----- ----- C0631-24 E0631-24
M38 M38A1 M170 M151 OIL (TAKEOUT) 1 ----- C0631-24T E0631-24T
M38 M38A1 M170 M151 OIL ELECTRICAL SENDER 1 ----- ----- C0632-24 E0632-24
----- ----- C0626-PLATE C0601-PM-DM
M38 M38A1 M170 CLIP, INSTRUMENT PANEL ATTACHMENT 4 ----- (MALE
----- C0626-CC
M38 M38A1 M170 SCREW, INSTRUMENT PLATE ATTACHMENT 4 ----- BAYONETTE)
----- C0626-CCS
M38 M38A1 M170 M151 ADAPTOR TO DOUGLASS FEMALE BAYONETTE V ----- ----- C0601-PM-DF
M38 M38A1 M170 M151 E or C0631-24 ADAPTOR TO DOUGLASS MALE BAYONETTE 1 ----- ----- C0601-PM-DM
E or C0631-24T
MB GPW CJ2A CJ3A; EARLY CJ3B* ORIGINAL OIL GAUGE STEEL LINE ALONG FIREWALL 1 B0631-LINE B0631-LINE B0631-LINE
MB GPW CJ2A CJ3A; EARLY CJ3B* HOSE FROM BLOCK TO B0631-LINE 1 B0135-O B0135-O B0135-O
# ALL FUEL GAUGES & SENDERS MUST MATCH OHMS & BE PROPERLY GROUNDED OTHERWISE THEY WILL NOT WORK. IF NEEDED, PLEASE ASK FOR HELP WHEN ORDERING!
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 21
GROUP 07: TRANSMISSIONS
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
TRANSMISSION, REBUILT (W/EXCHANGE) B0701-R B0701-R^^ 2A0701-R^ 2A0701-R 2A0701-R 2A0701-R 2A0701-R 2A0701-R 2A0701-R
TRANSMISSION, REBUILT COLUMN SHIFT (EXCHANGE) ---- ---- 2A0701-E-R^ ---- ---- ---- ---- ---- ----
HOUSING, TRANSMISSION TOP SHIFT B0701-HSG B0701-HSG 2A0701-HSG 2A0701-HSG 2A0701-HSG 2A0701-HSG 2A0701-HSG 2A0701-HSG 2A0701-HSG
STUD,PIVOT FOR CLUTCH YOKE B0209 B0701-STUD B0701-STUD B0701-STUD B0701-STUD B0701-STUD B0701-STUD B0701-STUD B0701-STUD B0701-STUD
CROSSMEMBER, TRANSMISSION MOUNT B0701-CM B0701-CM B0701-CM~ 3A0701-CM 3A0701-CM 3A0701-CM 3A0701-CM 3A0701-CM 3A0701-CM
GASKET SET, TRANSMISSION OVERHAUL B0702 B0702 2A0702 2A0702 2A0702 2A0702 2A0702 2A0702 2A0702
SEAL, SHAFT MAIN INPUT FRONT B0703 B0703 B0703 B0703 B0703 B0703 B0703 B0703 B0703
SEAL, SHAFT MAIN INPUT FRONT LATE B0703-L~~ B0703-L~~ B0703-L~~ ---- ---- ---- ---- ---- ----
BEARING, GEAR & SHAFT INPUT FRONT B0704 B0704 2A0704 2A0704 2A0704 2A0704 2A0704 2A0704 2A0704
RING, SNAP MAIN INPUT BEARING B0704-R B0704-R 2A0704-R 2A0704-R 2A0704-R 2A0704-R 2A0704-R 2A0704-R 2A0704-R
BEARING, SHAFT MAIN INPUT REAR B0705 B0705 B0705 B0705 B0705 B0705 B0705 B0705 B0705
SPACER, BEARING MAIN SHAFT ---- ---- 2A0705-SL# 2A0705-SL 2A0705-SL 2A0705-SL 2A0705-SL 2A0705-SL 2A0705-SL
GEAR & SHAFT, MAIN DRIVE INPUT B0706 B0706 2A0706 2A0706 2A0706 2A0706 2A0706 2A0706 2A0706
RING, SNAP MAIN DRIVE INPUT SHAFT B0706-R B0706-R 2A0706-R 2A0706-R 2A0706-R 2A0706-R 2A0706-R 2A0706-R 2A0706-R
GEAR, SECOND B0707 B0707 2A0707 2A0707 2A0707 2A0707 2A0707 2A0707 2A0707
GEAR, FIRST & REV; SLIDES ON MAIN SHAFT B0708 B0708 2A0708 2A0708 2A0708 2A0708 2A0708 2A0708 2A0708
GEAR, REVERSE IDLER B0709 B0709 2A0709 2A0709 2A0709 2A0709 2A0709 2A0709 2A0709
GEAR, CLUSTER COUNTER SHAFT B0710 B0710 2A0710 2A0710 2A0710 2A0710 2A0710 2A0710 2A0710
FORK, SHIFTER 1st & REVERSE B0711 B0711 2A0711 2A0711 2A0711 2A0711 2A0711 2A0711 2A0711
RAIL, SHIFTER FORK; 1st & REV GEAR B0711-RAIL B0711RAIL 2A0711-RAIL 2A0711-RAIL 2A0711-RAIL 2A0711-RAIL 2A0711-RAIL 2A0711-RAIL 2A0711-RAIL
FORK, SHIFTER 2nd & 3rd B0712 B0712 2A0712 2A0712 2A0712 2A0712 2A0712 2A0712 2A0712
RAIL, SHIFTER FORK; 2nd & 3rd GEAR B0712-RAIL B0712-RAIL 2A0712-RAIL 2A0712-RAIL 2A0712-RAIL 2A0712-RAIL 2A0712-RAIL 2A0712-RAIL 2A0712-RAIL
RAIL, GUIDE BOTH SHIFTER FORKS B071112-GR B071112-GR ---- ---- ---- ---- ---- ---- ----
PLATE, SHIFTER GUIDE (TOP OF TRANS) B0713 B0713 ---- ---- ---- ---- ---- ---- ----
MOUNT, TRANSMISSION B0714 B0714 B0714 B0714 B0714 B0714 B0714 B0714 B0714
MOUNTING KIT, ENGINE, TRANS & T.C. B0131-MK@ B0131-MK@ B0131-MK@ B0131-MK@ B0131-MK@ B0131-MK@ B0131-MK@ B0131-MK@ B0131-MK@
KNOB, SHIFTER TRANS. (SMOOTH) B0715* B0715* B0715* 3A0715* C0715* 3A0715* 3A0715* 3A0715* C0715*
KNOB, SHIFTER TRANS. W/ RIDGE B0715-RDG* B0715-RDG* B0715-RDG* ---- ---- ---- ---- ---- ----
SHIELD, OIL RETAINER MAINSHAFT B0716 B0716 ---- ---- ---- ---- ---- ---- ----
RING, RETAINER SHIFTER BOOT B0717 B0717 2A0717 2A0717 ---- 2A0717 2A0717 2A0717 ----
BOOT, SHIFTER TRANS. RUBBER B0718-R B0718-R 2A0718 2A0718 C0718 2A0718 2A0718 2A0718 C0718
CLAMP, SHIFT BOOT UPPER SHIFT CANE ---- ----- ----- ----- B0546-3 ----- ----- ----- B0546-3
CLAMP, SHIFT BOOT LOWER BASE ---- ----- ----- ----- B0546-15 ----- ----- ----- B0546-15
BOOT, SHIFTER TRANS. LEATHER B0718-L B0718-L ---- ---- ---- ---- ---- ---- ----
GASKET KIT, FUEL TANK TO GAS WELL RUBBER B0301-FSKT B0301-FSKT ----- ----- ----- ----- ----- ----- -----
GASKET KIT, FUEL TANK TO GAS WELL FELT ---- G0301-FSKT ----- ----- ----- ----- ----- ----- -----
PLATE, TRANSMISSION COVER B1803 B1803 2A1803 2A1803 C1803 2A1803 2A1803 2A1803 C1803
GASKET KIT, ALL OTHER FLOOR SEALS RUBBER B1803-KT-R B1803-KT-R ----- ----- ----- ----- ----- ----- -----
SYNCHRONIZER UNIT ASSEMBLY B0723 B0723 2A0723 2A0723 2A0723 2A0723 2A0723 2A0723 2A0723
RING ONLY, BLOCKING SYNCHRONIZER B0723-BR+ B0723-BR+ 2A0723-BR+ 2A0723-BR+ 2A0723-BR+ 2A0723-BR+ 2A0723-BR+ 2A0723-BR+ 2A0723-BR+
BEARING ASSY, SHAFT MAIN ROLLER B0724 B0724 2A0724 2A0724 2A0724 2A0724 2A0724 2A0724 2A0724
ROLLER, SHAFT MAIN (INDIVIDUAL) B0724-1** B0724-1** 2A0724-1*** 2A0724-1*** 2A0724-1*** 2A0724-1*** 2A0724-1*** 2A0724-1*** 2A0724-1***
CANE, SHIFTER CANE B0726 B0726 2A0726 2A0726 C0726 2A0726 2A0726 2A0726 C0726
COVER, CAST TRANS HOUSING TOP B0727 B0727 2A0727++ 2A0727++ C0727++ 2A0727++ 2A0727++ 2A0727++ C0727++
CAP, SHIFT CANE RETAINER THREADED B0727-CAP B0727-CAP ---- ---- ---- ---- ---- ---- ----
SPRING, SHIFTER CANE CAP B0727-SPG B0727-SPG ---- ---- ---- ---- ---- ---- ----
WASHER, DOMED SHIFTER CAP B0727-W B0727-W ---- ---- ---- ---- ---- ---- ----
CAP, FRONT BEARING RETAINER B0728 B0728 2A0728 2A0728 2A0728 2A0728 2A0728 2A0728 2A0728
SMALL PARTS KIT FOR TRANSMISSION B0729 B0729 2A0729 2A0729 2A0729 2A0729 2A0729 2A0729 2A0729
SHAFT, MAIN (OUTPUT TO T.C.) B0730 B0730 2A0730 2A0730 2A0730 2A0730 2A0730 2A0730 2A0730
SHAFT, CLUSTER GEAR B0731 B0731 2A0731 2A0731 2A0731 2A0731 2A0731 2A0731 2A0731
BUSHING/BRG,SHFT CLUSTER GEAR**** B0732 B0732 2A0732 2A0732 2A0732 2A0732 2A0732 2A0732 2A0732
ROLLER ONLY,SHAFT CLUSTER GEAR***** ---- ---- 2A0732-1 2A0732-1 2A0732-1 2A0732-1 2A0732-1 2A0732-1 2A0732-1
SPACER, SHAFT CLUSTER GEAR B0733 B0733 2A0733 2A0733 2A0733 2A0733 2A0733 2A0733 2A0733
SHAFT, REVERSE IDLER B0734 B0734 2A0734 2A0734 2A0734 2A0734 2A0734 2A0734 2A0734
WASHER, COUNTER SHAFT B0735 B0735 2A0735 2A0735 2A0735 2A0735 2A0735 2A0735 2A0735
UNLESS NOTED, ALL LISTINGS ABOVE ARE FOR THE T-84 (3) SPEED TOP SHIFT MB & GPW TRANSMISSION &
THE CJ2A,CJ3A, CJ3B, CJ5,CJ6, M38, M38A1, & M170 T-90 3 SPEED TOP SHIFT TRANSMISSIONS WITH (4) CYLINDER ENGINES.
ORDER ONE ORDER NUMBER PER TRANSMISSION, UNLESS "RPV" IS OTHERWISE IS NOTED **= 13RPV; ***=14RPV;****=4 RPV; *****=88
* MB, GPW & CJ2A HAD A THREADED SHIFTER CANE B0726 THAT ACCEPTED A SMALL 1" DIAMETER SHIFT KNOB, THE SAME AS USED ON THE
TRANSFER CASE SHIFT LEVERS (B0715). THE C0715 KNOB IS A NON-THREADED LARGE MUSHROOM SHAPED KNOB THAT PRESSES ONTO A
NON-THREADED SHIFTER CANE C0727. 3A0715 IS A LARGE THREADED MUSHROOM SHAPE KNOB THAT THREADS ONTO THREADED SHIFTER CANE
B0727 OR 2A0727. THREADED KNOBS B0715 & 3A0715 ARE INTERCHANGEABLE.
^ EARLY CJ2A TO S/N 38221 USED SIDE SHIFT T-90 FOR COLUMN SHIFT ARRANGEMENTS.
^^ SOME T-84 TRANSMISSIONS WERE FORD GPW MARKED, HARD TO FIND & SPECIAL ORDER. UNLESS SPECIFIED, YOU WILL RECEIVE A WILLY'S T-84.
~ LATE 1949 CJ2AS USED A CJ3A STYLE CROSSMEMBER 3A0701-CM.
~~ B0703-L WAS ONLY USED ON SOME, BUT NOT ALL LATE 1945 MB AND GPW T-84 TRANSMISSIONS.
# USED ON CJ2A T-90 TRANSMISSIONS AFTER S/N 24196 AND ALL T-90S THEREAFTER.
+ 2 BLOCKING RINGS REQUIRED PER VEHICLE. B0723-BR IS INCLUDED IN B0723. 2A0723-BR IS INCLUDED IN 2A0723.
++ INCLUDES SHIFTER CANE 2A0726 & INTERNAL CANE COMPONENTS IN CAST COVER.
@ B0131-MK INCLUDES (1) B0714, (2) B0131, & (1) B0811.
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 22
GROUP 07: TRANSMISSION
B0711-RAIL B071112-GR
B0729 B0711
B0723
B0723-BR B0708 B0716
B0706 B0724 B0712 B0705
B0724-1 B0712-RAIL
B0729
T-84 3-SPEED
B0702 B0713
(MB & GPW) B0730
B0707
B0723
B0729
B0723-BR
B0729
B0704 B0731
B0702
2A0703
B0728 B0710 B0734
B0709
B0735 B0733
B0729 B0732
B0725
B0714
B0704-R B0727-CAP
B0715
B0706-R B0727-SPG
B0715-RDG
B0726 B0727
B0702
T-90 3-SPEED
(CJ2A, 3A, 3B, 5, 6,
M38, M38A1 & M170)
NO. ORDER NO. NO. ORDER NO. NO. ORDER NO. NO. ORDER NO.
2. 2A0728 17. 2A0727 32. 2A0723-BR 49. 2A0732, 2A0732-1, 2A0729
3. 2A0702, 2A0703 18. 2A0702 32.,34-40. 2A0723 51. 2A0732, 2A0732-1, 2A0729
4. 2A0704-R, 2A0729 19. 2A0712 33. 2A0735, 2A0729 52. 2A0733
5. 2A0706-R, 2A0729 21. 2A0712-RAIL 40. 2A0723-BR 53. 2A0734
6. 2A0704 22. 2A0730 41. 2A0707 54. 2A0709
7. 2A0729 23. 2A0708 43. 2A0705-SL 55. 2A0710
8. 2A0706 24. 2A0711 45. 2A0731 56. 2A0726, 2A0727
9. 2A0724, 2A0724-1 26. 2A0711-RAIL 46. 2A0729 60. 2A0701-HSG
15. 2A0727 27. B0705 47. 2A0729 61. 2A0702
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 23
GROUP 08: TRANSFER CASE
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
TRANSFERCASE, REBUILT STANDARD B0801-R G0801-R 2A0801-R+++ 2A0801-R+++ 2A0801-R+++ 3B0801-R~ 3B0801-R~ 3B0801-R~ 2A0801-R+++
TRANSFERCASE, REBUILT EARLY ---- ---- 2A0801-E-R++ ---- ---- 2A0801-R+++ ---- ---- ----
GASKETS & SEALS
OVERHAUL KIT, GASKET & SEAL B0802 B0802 B0802 B0802 B0802 B0802 B0802 B0802 B0802
GASKET KIT, TRANSFER CASE B0802-G B0802-G B0802-G B0802-G B0802-G B0802-G B0802-G B0802-G B0802-G
SEAL, SHIFT ROD ** B0802-RS B0802-RS B0802-RS B0802-RS B0802-RS B0802-RS B0802-RS B0802-RS B0802-RS
SEAL KIT, SHIFTRODS & OUTPUTSHAFTS B0802-S B0802-S B0802-S B0802-S B0802-S B0802-S B0802-S B0802-S B0802-S
SEAL ONLY,SHAFT OUTPUT FRONT or REAR B0803-S** B0803-S** B0803-S** B0803-S** B0803-S** B0803-S** B0803-S** B0803-S** B0803-S**
FELT ONLY,SHAFT OUTPUT FRONT or REAR B0803-F** B0803-F** B0803-F** B0803-F** B0803-F** B0803-F** B0803-F** B0803-F** B0803-F**
GASKET FOR OUTPUT SHAFT SEAL B0803-S B0803-G** B0803-G** B0803-G** B0803-G** B0803-G** B0803-G** B0803-G** B0803-G** B0803-G**
SHIM SET, BEARING REAR CAP B0804 B0804 B0804 B0804 B0804 B0804 B0804 B0804 B0804
YOKE
FLANGE, YOKE JOINT ‘U’ REAR B0807-R B0807-R B0807-R B0807-R B0807-R B0807-R B0807-R B0807-R B0807-R
FLANGE,YOKE JOINT ‘U’ FRONT B0807-F B0807-F B0807-F B0807-F B0807-F B0807-F B0807-F B0807-F B0807-F
LEVER,SHIFT FRONT AXLE IN/OUT B0808 B0808 B0808 B0808 B0808 B0808 B0808 B0808 B0808
LEVER,SHIFT RANGE HIGH/LOW B0809 B0809 B0809 B0809 B0809 B0809 B0809 B0809 B0809
SHIFTERS
PIN,SHIFT LEVERS PIVOT ON B0812 B0812 B0812 B0812 B0812 B0812 B0812 B0812 B0812
KNOB, SHIFTERS TC (SMOOTH)** ^^ B0715 B0715 B0715 B0715 B0715 B0715 B0715 B0715 B0715
KNOB, SHIFTER T.C. W/ RIDGE** ^^ B0715-RDG B0715-RDG B0715-RDG B0715-RDG B0715-RDG B0715-RDG B0715-RDG B0715-RDG B0715-RDG
SPRING, SHIFT LEVER RETAINER B0816 B0816 B0816 B0816 B0816 B0816 B0816 B0816 B0816
PLATES BOOTS MTG
MOUNT ASS’Y, TRANSFERCASE B0811 B0811 B0811 B0811 B0811 B0811 B0811 B0811 B0811
MOUNTKIT; ENGINE, TRANS & T.C. B0131-MK@ B0131-MK@ B0131-MK@ B0131-MK@ B0131-MK@ B0131-MK@ B0131-MK@ B0131-MK@ B0131-MK@
RING, SHIFTER BOOT RETAINING B0817 B0817 2A0817 2A0817 2A0817 2A0817 2A0817 2A0817 2A0817
BOOT, SHIFTER LEVERS RUBBER B0818-R B0818-R 2A0818 2A0818 2A0818 2A0818 2A0818 2A0818 2A0818
BOOT, SHIFTER LEVERS LEATHER B0818-L B0818-L B0818-L ---- ---- ---- ---- ---- ----
PLATE, COVER END REAR B0820 B0820 B0820 B0820 B0820 B0820 B0820 B0820 B0820
PAN, (COVER BOTTOM OF CASE) OIL B0821 B0821 B0821 B0821 B0821 B0821 B0821 B0821 B0821
GASKET, PAN OIL (BOTTOM OF CASE B0821) B0814 B0814 B0814 B0814 B0814 B0814 B0814 B0814 B0814
GEAR, MAIN SHAFT (FROM TRANMISSION) B0822 B0822 2A0822 2A0822 2A0822 3B0822 3B0822 3B0822 2A0822
GEAR, INTERMEDIATE EARLY ---- ---- 2A0823-E++ ---- ---- 2A0823+++ ---- ---- ----
INTERMEDIATE GEAR
GEAR, INTERMEDIATE B0823+ B0823+ 2A0823+++ 2A0823+++ 2A0823+++ 3B0823~ 3B0823~ 3B0823~ 2A0823+++
SHAFT, GEAR INTERMEDIATE EARLY ---- ---- B0827+++ ---- ---- 2A0827+++ ---- ---- ----
SHAFT, GEAR INTERMEDIATE B0827+ B0827+ 2A0827+++ 2A0827+++ 2A0827+++ 3B0827~ 3B0827~ 3B0827~ 2A0827+++
BEARING, GEAR INTER. EARLY(2 RPV) ---- ---- B0826 ---- ---- 2A0826* ---- ---- 2A0826
BEARING, GEAR INTERMEDIATE(2 RPV) B0826+ B0826+ 2A0826+++ 2A0826+++ 2A0826+++ 3B0826~ 3B0826~ 3B0826~ 2A0826+++
ROLLER, GEAR INTERMEDIATE (48 RPV) ---- ---- ---- ---- ---- 3B0826-1~ 3B0826-1~ 3B0826-1~ ----
WASHER, THRUST INTERMEDIATE EARLY ---- ---- B0825+ ---- ---- 2A0825+++ ---- ---- ----
WASHER, THRUST INTERMEDIATE B0825 B0825 2A0825+++ 2A0825+++ 2A0825+++ 3B0825~ 3B0825~ 3B0825~ 2A0825
GEAR, SHAFT OUTPUT B0824 B0824 2A0824 2A0824 2A0824 3B0824 3B0824 3B0824 2A0824
GEAR, SHAFT OUTPUT SLIDING B0824-S B0824-S 2A0824-S 2A0824-S 2A0824-S 3B0824-S 3B0824-S 3B0824-S 2A0824-S
SHAFT, FRONT OUTPUT 3/4"-20 THREADED END B0828 B0828 B0828 B0828 B0828 ---- ---- ---- ----
SHAFT, FRONT OUTPUT 3/4"-16 THREADED END ---- ---- ---- ---- C0828-L C0828-L C0828-L C0828-L C0828-L
OUTPUT SHAFT
SHAFT, REAR OUTPUT 3/4"-20 THREADED END B0835 B0835 B0835 B0835 B0835 ---- ---- ---- ----
SHAFT, REAR OUTPUT 3/4"-16 THREADED END ---- ---- ---- ---- C0835-L C0835-L C0835-L C0835-L C0835-L
NUT, CASTLED FOR 3/4"-20 THREAD B0828-NUT B0828-NUT B0828-NUT B0828-NUT B0828-NUT ---- ---- ---- ----
NUT, CASTLED FOR 3/4"-16 THREAD ---- ---- ---- ---- B1019 B1019 B1019 B1019 B1019
BEARING, CONE SHAFT OUTPUT B0805 B0805 B0805 B0805 B0805 B0805 B0805 B0805 B0805
BEARING, CUP SHAFT OUTPUT B0806 B0806 B0806 B0806 B0806 B0806 B0806 B0806 B0806
WASHER, THRUST OUTPUT SHAFT B0833 B0833 B0833 B0833 B0833 B0833 B0833 B0833 B0833
BUSHING, OUTPUT CLUTCH SHAFT B0834 B0834 B0834 B0834 B0834 B0834 B0834 B0834 B0834
BEARING, BALL CLUTCH SHAFTOUTPUT B0813 B0813 B0813 B0813 B0813 B0813 B0813 B0813 B0813
FORK
FORK, SHIFTER FRONT WHEEL DRIVE B0829-F B0829-F B0829-F B0829-F B0829-F B0829-F B0829-F B0829-F B0829-F
FORK, SHIFTER HIGH / LOW RANGE B0829-U B0829-U B0829-U B0829-U B0829-U B0829-U B0829-U B0829-U B0829-U
PARTS KIT, SMALL MISCELLANEOUS STANDARD B0830 B0830 2A0830+++ 2A0830 2A0830 3B0830~ 3B0830 3B0830 2A0830
PARTS KIT, SMALL MISCELLANEOUS EARLY ---- ---- B0830++ ---- ---- 2A0830+++ ---- ---- ----
SPEEDO
GEAR, DRIVE SPEEDOMETER B0831 B0831 B0831 B0831 B0831 B0831 B0831 B0831 B0831
GEAR, SPEEDOMETER (DRIVEN) B0832~~ B0832~~ 2A0832~~ 2A0832~~ C0832~~ 2A0832~~ 2A0832~~ 2A0832~~ C0832~~
TRANSFERCASE NUT FOR SPEEDOCABLE B0832-NUT B0832-NUT B0832-NUT B0832-NUT C0832-NUT B0832-NUT B0832-NUT B0832-NUT C0832-NUT
MODEL 18 -USED ON CJ2A,CJ3A,CJ3B,CJ5,CJ6,475,FORWARD CONTROL JEEPS,MB,M38,M38A1,M170, 4 CYLINDER OR EARLY V6;
ALSO USED WITH EARLY CJ3B,CJ5,CJ6 WITH T-90 3 SPEED OR SOME T-98 4 SPEED MANUAL TRANSMISSION
+B0823 WAS USED ON ALL MB'S AND GPW'S. IT HAS A 1-1/4" DIAMETER CENTER HOLE WITH 23 STRAIGHT& 33 SLANTED EXTERNAL TEETH .
IT ALSO USES SHAFT B0827 (3/4" DIAMETER), TWO B0826 BEARINGS ASSEMBLIES AND TWO B0825 THRUST WASHERS.
++2A0801-E-R, B0830 & 2A0823-E WAS USED ON EARLY CJ2A'S UP TO S/N 24196. 2A0823-E HAS A 1-1/4" DIAMETER CENTER HOLE WITH 21
STRAIGHT& 34 SLANTED EXTERNAL TEETH & USES SHAFT B0827 (3/4" DIAMETER), TWO B0826 BEARINGS AND TWO B0825 THRUST WASHERS.
+++2A0801-R, 2A0830 & 2A0823 WAS USED ON CJ2A AFTER S/N 24196, ON CJ3B UP TO S/N 54-12506, AND ALL CJ3A, M38, M38A1 & M170.
2A0823 HAS AN 1-5/8" DIAMETER CENTER HOLE WITH 21 STRAIGHT & 34 SLANTED EXTERNAL TEETH.
IT ALSO USES SHAFT 2A0827 (1-1/8" DIAMETER), TWO 2A0826 BEARINGS AND TWO 2A0825 THRUST WASHERS.
~3B0801-R, 3B0830 & 3B0823 WAS USED ON CJ3B AFTER S/N 54-12506, ON CJ3B AND ALL CJ5 AND CJ6. 3B0823 HAS AN 1-5/8" DIAMETER CENTER
HOLE WITH 18 STRAIGHT & 39 SLANTED EXTERNAL TEETH & ALSO USES SHAFT 3B0827 (1-1/4" DIAMETER), TWO 3B0826 BEARINGS & TWO 3B0825
THRUST WASHERS. (3B0826 IS A LOOSE BEARING SET USING 24 INDIVIDUAL ROLLERS; RPV=48 ROLLERS OR 2 BEARING SETS).
~~ B0832 HAS 14 TEETH. 2A0832 HAS 15 TEETH. B0832 & 2A0832 USE B0627. C0832 HAS 15 TEETH & AND USES C0627.
^^B0715 HAS A SLIGHT MOLD MARK AROUND THE EQUATOR. B0715-RDG HAS ONE THAT IS MORE PRONOUNCED. BOTH ARE INTERCHANGEABLE.
@ B0131-MK INCLUDES (1) B0714, (2) B0131, & (1) B0811. ** 2 REQUIRED PER VEHICLE
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 24
GROUP 09: PROPELLER SHAFTS
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
'U' BOLT FOR 'U' JOINT B0901 B0901 B0901 B0901 B0901 B0901 B0901 B0901 B0901
'U'-JOINT, UNIVERSAL ASSEMBLY B0902 B0902 B0902 B0902 B0902 B0902 B0902 B0902 B0902
FITTING, GREASE NIPPLE SMALL B0902-ZERK B0902-ZERK B0902-ZERK B0902-ZERK B0902-ZERK B0902-ZERK B0902-ZERK B0902-ZERK B0902-ZERK
SHAFT ASSEMBLY, REAR PROPELLER B0905 B0905 B0905 B0905 B0905 B0905 B0905 6E0905 B0905
SHAFT ASSEMBLY, FRONT PROPELLER B0906 B0906 B0906 B0906 B0906 B0906 5E0906 5E0906 5E0906
SEAL, PROPELLER SHAFT SPLINE B0907 B0907 B0907 B0907 B0907 B0907 B0907 B0907 B0907
BOOT, RUBBER FOR PTO LEVER 2A0907-R 2A0907-R 2A0907-R 2A0907-R 2A0907-R 2A0907-R 2A0907-R 2A0907-R 2A0907-R
BOOT, LEATHER FOR PTO LEVER 2A0907-L 2A0907-L 2A0907-L 2A0907-L 2A0907-L 2A0907-L 2A0907-L 2A0907-L 2A0907-L
CAP, METAL FOR SEAL B0907 B0908 B0908 B0908 B0908 B0908 B0908 B0908 B0908 B0908
ORDER NUMBERS
1,2,3,5,6,12. B0902
7,8,9,10,11. B0905,6E0905
7,8,9,10,11. B0906, 5E0906
8. B0907
9. B0908
12. B0902-ZERK
GROUP 08:
ORDER NUMBERS MB & GPW TRANSFER CASE
2. B0829-F 41. B0804
4. B0805 42. B0803-S
5. B0806 45. B0832
6. B0802, 49. B0829-U
B0802-G 51. B0806
10. B0813 52. B0805
11. B0834 54. B0802,
12. B0835 B0802-G
19. B0802-S, 55. B0821 26A.
B0802 56. B0824-S
20. B0715 57. B0822
21. B0809 61. B0826
22. B0808 62. B0827
23. B0816 63. B0825
25. B0812 64. B0823
26. B0807-F 65. B0825
26A. B0803-F 66. B0826
29. B0828-NUT 67. B0828
B1019 68. B0824
30. B0803-S 69. B0833
31. B0828-NUT
B1019
33. B0807-R
35. B1222*
37. B0820
38. B0802
40. B0831
*EARLY STYLE BRAKE DRUM SHOWN. SEE B1222 AND 2A1222 UNDER GROUP 12 BRAKES.
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 25
GROUP 10: MODEL 25 FRONT AXLE
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
COVER, AXLE DIFFERENTIAL B1035~~ B1035~~ B1035~~ B1035~~ B1035~~ B1035~~ B1035~~ B1035~~ B1035~~
GASKET, DIFF. COVER B1035 (25 & 27) B1003~~ B1003~~ B1003~~ B1003~~ B1003~~ B1003~~ B1003~~ B1003~~ B1003~~
PLUG, VENT AXLE HOUSING COVER B1035-VENT B1035-VENT B1035-VENT B1035-VENT B1035-VENT B1035-VENT B1035-VENT B1035-VENT B1035-VENT
BEARING, CONE DIFF. CARRIER SIDE B1005 B1005 B1005 B1005 B1005 B1005 B1005 B1005 B1005
BEARING, CUP DIFF. CARRIER SIDE B1006 B1006 B1006 B1006 B1006 B1006 B1006 B1006 B1006
GEAR & PINION RING 4:88 RATIO B1008-488^ B1008-488^ ---- ---- ---- ---- ---- ---- ----
GEAR & PINION RING 5:38 RATIO ---- ---- B1008-538^ B1008-538^ B1008-538^ B1008-538^ B1008-538^ B1008-538^ B1008-538^
GEAR SET, SPIDER DIFF. (25 & 27) B1009 B1009 B1009 B1009 B1009 B1009 B1009 B1009 B1009
WASHER, THRUSTBEVELGEAR DIF(25&27) B1007 B1007 B1007 B1007 B1007 B1007 B1007 B1007 B1007
WASHER,THRUST SIDEGEAR DIF(25 &27) B1045 B1045 B1045 B1045 B1045 B1045 B1045 B1045 B1045
SHIM KIT, DIFF. CARRIER (25,27&30) B1011 B1011 B1011 B1011 B1011 B1011 B1011 B1011 B1011
LOCK STRAP, RING GEAR BOLT B1029 B1029 B1029 B1029 B1029 B1029 B1029 B1029 B1029
BEARING, CONE PINION INNER (25 & 44) B1013 B1013 B1013 B1013 B1013 B1013 B1013 B1013 B1013
BEARING, CUP PINION INNER (25 & 27) B1014 B1014 B1014 B1014 B1014 B1014 B1014 B1014 B1014
BEARING, CONE PINION OUTER B1015 B1015 B1015 B1015 B1015 B1015 B1015 B1015 B1015
BEARING, CUP PINION OUTER B1016 B1016 B1016 B1016 B1016 B1016 B1016 B1016 B1016
SHAFT, (PIN) PINION DIFF.GEAR (25 & 27) B1010 B1010 B1010 B1010 B1010 B1010 B1010 B1010 B1010
SEAL, OIL; PINION SHAFT B1017 B1017 B1017 B1017 B1017 B1017 B1017 B1017 B1017
GASKET, OIL SEAL PINION PINION SHAFT B1017-G B1017-G B1017-G B1017-G B1017-G B1017-G B1017-G B1017-G B1017-G
SHIM KIT, PINION (25 & 44) B1018 B1018 B1018 B1018 B1018 B1018 B1018 B1018 B1018
NUT, PINION SHAFT THREAD B1019 B1019 B1019 B1019 B1019 B1019 B1019 B1019 B1019
YOKE & SHIELD FOR PINION FRONT AXLE B0807-F B0807-F B0807-F B0807-F B0807-F B0807-F B0807-F B0807-F B0807-F
YOKE & SHIELD FOR PINION REAR AXLE B0807-F B0807-F B0807-F B0807-F B0807-F 3B1120 3B1120 3B1120 B0807-F
SLINGER, PINION (YOKE) B1030 B1030 B1030 B1030 B1030 B1030 B1030 B1030 B1030
PIN, PINION SHAFT SET (25 & 27) B1034 B1034 B1034 B1034 B1034 B1034 B1034 B1034 B1034
SHAFT, AXLE FRONT RIGHT BENDIX STYLE@ B1022-R-BX B1022-R-BX B1022-R-BX B1022-R-BX ---(Shaft has spline & threaded at end towards B1043 flange) ---
SHAFT, AXLE FRONT RIGHT RZEPPA STYLE@ B1022-R-RZ B1022-R-RZ B1022-R-RZ B1022-R-RZ ---(Shaft has spline & threaded at end towards B1043 flange) ---
SHAFT, AXLE FRONT RIGHT TRACTA STYLE@ B1022-R-TC B1022-R-TC B1022-R-TC B1022-R-TC ---(Shaft has spline & threaded at end towards B1043 flange) ---
SHAFT, AXLE FRONT RIGHT SPICER STYLE@ B1022-R-SP B1022-R-SP B1022-R-SP B1022-R-SP ---(Shaft has spline & threaded at end towards B1043 flange) ---
SHAFT, AXLE FRONT LEFT BENDIX STYLE@ B1022-L-BX B1022-L-BX B1022-L-BX B1022-L-BX ---(Shaft has spline & threaded at end towards B1043 flange) ---
SHAFT, AXLE FRONT LEFT RZEPPA STYLE@ B1022-L-RZ B1022-L-RZ B1022-L-RZ B1022-L-RZ ---(Shaft has spline & threaded at end towards B1043 flange) ---
SHAFT, AXLE FRONT LEFT TRACTA STYLE@ B1022-L-TC B1022-L-TC B1022-L-TC B1022-L-TC ---(Shaft has spline & threaded at end towards B1043 flange) ---
SHAFT, AXLE FRONT LEFT SPICER STYLE@ B1022-L-SP B1022-L-SP B1022-L-SP B1022-L-SP ---(Shaft has spline & threaded at end towards B1043 flange) ---
NUT, FRONT AXLE SHAFT THREAD B1019 B1019 B1019 B1019 ---- ---- ---- ---- ----
SHAFT, AXLE FRONT RIGHT BENDIX STYLE@ (Shaft has spline & no threaded end towards B1043 cap) 3B1022-R-BX 3B1022-R-BX 3B1022-R-BX 3B1022-R-BX 3B1022-R-BX
SHAFT, AXLE FRONT RIGHT RZEPPA STYLE@ (Shaft has spline & no threaded end towards B1043 cap) 3B1022-R-RZ 3B1022-R-RZ 3B1022-R-RZ 3B1022-R-RZ 3B1022-R-RZ
SHAFT, AXLE FRONT RIGHT TRACTA STYLE@ (Shaft has spline & no threaded end towards B1043 cap) 3B1022-R-TC 3B1022-R-TC 3B1022-R-TC 3B1022-R-TC 3B1022-R-TC
SHAFT, AXLE FRONT RIGHT SPICER STYLE@ (Shaft has spline & no threaded end towards B1043 cap) 3B1022-R-SP 3B1022-R-SP 3B1022-R-SP 3B1022-R-SP 3B1022-R-SP
SHAFT, AXLE FRONT LEFT BENDIX STYLE@ (Shaft has spline & no threaded end towards B1043 cap) 3B1022-R-BX 3B1022-L-BX 3B1022-L-BX 3B1022-L-BX 3B1022-L-BX
SHAFT, AXLE FRONT LEFT RZEPPA STYLE@ (Shaft has spline & no threaded end towards B1043 cap) 3B1022-R-RZ 3B1022-L-RZ 3B1022-L-RZ 3B1022-L-RZ 3B1022-L-RZ
SHAFT, AXLE FRONT LEFT TRACTA STYLE@ (Shaft has spline & no threaded end towards B1043 cap) 3B1022-R-TC 3B1022-L-TC 3B1022-L-TC 3B1022-L-TC 3B1022-L-TC
SHAFT, AXLE FRONT LEFT SPICER STYLE@ (Shaft has spline & no threaded end towards B1043 cap) 3B1022-R-SP 3B1022-L-SP 3B1022-L-SP 3B1022-L-SP 3B1022-L-SP
SEAL, AXLE SHAFT INNER HSG (25 & 27) B1021 B1021 B1021 B1021 B1021 B1021 B1021 B1021 B1021
SEAL KIT, STEERING KNUCKLE 2A1023 2A1023 2A1023 2A1023 2A1023 2A1023 2A1023 2A1023 2A1023
CAP, KING PIN BEARING UPPER ---- ---- B1024 B1024 B1024 B1024 B1024 B1024 B1024
CAP, KING PIN BEARING LOWER B1024 B1024 B1024 B1024 B1024 B1024 B1024 B1024 B1024
STUD, KING PIN BEARING CAP (16 RPV) B0108-STUD2 B0108-STUD2 B0108-STUD2 B0108-STUD2 B0108-STUD2 B0108-STUD2 B0108-STUD2 B0108-STUD2 B0108-STUD2
NUT, KING PIN BEARING STUD (16 RPV) B0108-NUT B0108-NUT B0108-NUT B0108-NUT B0108-NUT B0108-NUT B0108-NUT B0108-NUT B0108-NUT
WASHER, KING PIN BRG STUD (16 RPV) B0108-LW B0108-LW B0108-LW B0108-LW B0108-LW B0108-LW B0108-LW B0108-LW B0108-LW
SHIM KIT, KING PIN BEARING B1027 B1027 B1027 B1027 B1027 B1027 B1027 B1027 B1027
BEARING, CONE KING PIN B1025 B1025 B1025 B1025 B1025 B1025 B1025 B1025 B1025
BEARING, CUP KING PIN B1026 B1026 B1026 B1026 B1026 B1026 B1026 B1026 B1026
HUBS, LOCKOUT B1028 B1028 B1028 B1028 B1028 B1028 B1028 B1028 B1028
SPINDLE ASS’Y, WHEEL BEARING B1032 B1032 B1032 B1032 B1032 B1032 B1032 B1032 B1032
BUSHING, SPINDLE B1031 B1031 B1031 B1031 C1031 C1031 C1031 C1031 C1031
WASHER, AXLE THRUST LOOSE(2-1/4"OD) B1038 B1038 B1038 B1038 C1038 C1038 C1038 C1038 C1038
SEAL, FRONT AXLE HUB B1339 (2-7/8"DIA)** B1332 B1332 B1332 B1332 B1332 B1332 B1332 B1332 B1332
SEAL, FRONT AXLE HUB FOR LATE 3B1339 (3" DIA) ---- ---- ---- ---- ---- 3B1332 3B1332 3B1332 ----
HUB, FRONT AXLE (NO DRUM)** B1339 B1339 B1339 B1339 B1339 B1339 B1339 B1339 B1339
HUB, FRONT AXLE LATE LEFT LATE (NO DRUM) ---- ---- ---- ---- ---- 3B1339-L 3B1339-L 3B1339-L ----
HUB, FRONT AXLE LATE RIGHTLATE (NO DRUM) ---- ---- ---- ---- ---- 3B1339-R 3B1339-R 3B1339-R ----
FLANGE, 6-BOLT AXLE DRIVE (SPLINED) B1043 B1043 B1043 B1043 B1043 B1043 B1043 B1043 B1043
GASKET, HUB TO B1043 CAP(SNOWFLAKE) B1040 B1040 B1040 B1040 B1040 B1040 B1040 B1040 B1040
CAP, HUB DUST FRONT (LIKE A DERBY) B1327 B1327 B1327 B1327 B1327 B1327 B1327 B1327 B1327
SEAL, AXLE SHAFT IN OUTER AXLE HSG B1037-S~ B1037-S~ ---- ---- ---- ---- ---- ---- ----
GASKET, STG KNUCKLE TO BACK'G PLATE B1041 B1041 B1041 B1041 B1041 B1041 B1041 B1041 B1041
CLAMP KIT, BRAKE LINE TO AXLE TUBES B1047 B1047 B1047 B1047 B1047 B1047 B1047 B1047 B1047
(25)= MODEL 25 FRONT AXLE FOR MB, GPW, CJ2A, CJ3A; CJ3B, CJ5, & CJ6 UP TO 1965 (27)= MODEL 25AF CJ3B, CJ5, & CJ6 AFTER 1965
~ ONLY FOUND IN SOME BUT NOT ALL VERY LATE MB OR GPW MODEL 25 FRONT AXLE HOUSINGS. (MOSTLY USED ON GPW'S)
~~ MB, GPW & CJ2A UP TO S/N 13453 USED(2) B1035, (1) FOR EACH AXLE. AFTER CJ2A S/N 13453 & ALL OTHER VEHICLES, ONLY (1) B1035 WAS USED FOR FRONT AXLE.
^ MB/GPW USED 4:88 GEARING WHILE CJ2A, CJ3A, CJ3B, CJ5, CJ6, M38, M38A1 & M170 USED 5:38 GEARING. THESE DIFFERENTIAL GEARS ARE INTERCHANGABLE
BETWEEN ALL FRONT & SOME REAR AXLE HOUSINGS, HOWEVER YOU MUST MATCH FRONT AXLE TO REAR AXLE GEAR RATIOS ON FRONT & REAR AXLES
@ALL FRONT AXLE SHAFTS OF ANY MAKE ARE INTERCHANGEABLE WITH EACH OTHER. THEY CAN BE MIXED AND MATCHED. (See Chart On Page 27)
**B1339 & B1332 WERE THE MOST COMMON APPLICATIONS FOR FULL FLOAT AXLES. 3B1332 & 3B1339 SHOWED UP AS REPLACEMENTS.
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 26
GROUP 10: FRONT AXLE
MB & GPW
FRONT AXLE
ORDER NUMBERS
2. B1316, B1317 12. B1407-L
3. B1040 13. B1407-R
4. B1043 14. B1440-L
7. B1019 16. B1022-L**
8. B1327 17. B1407-L
11. B1440-R 26. B1042
ORDER NUMBERS
THIS DEPICTION
2. B1407-R 22. B1328 CAN BE REFERENCED
6. B1027 23. B1027 FOR MOST
7. B0108-STUD2 24. B1022-R** JEEP FRONT AXLES.
10. B1031 25. B1025
11. B1032 26. B1026 MB & GPW
PASSENGER
14. B1332 27. B1407-R SIDE SHOWN.
15. B1319 31. B1440-R
16. B1320 34,36,37,38. 2A1023 43 42
17. B1320 39. B1026 ** SEE
18. B1319 40. B1025 CHART
BELOW
19. B1342 41. B1024
*NOTE:
20. B1328 42. B1031,C1031* SOME LATE AXLES USE AN ADDI-
21. B1341 43. B1038* TIONAL B1037-S SEAL IN THIS AREA.
MB GPW CJ2A CJ3A Threaded End Non-Threaded End CJ3B CJ5 CJ6 M38 M38A1 M170
Left: B1022-L-BX Left: 3B1022-L-BX
Bendix
Right: B1022-R-BX Right: 3B1022-R-BX
Bendix
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 27
GROUP 11: REAR AXLE
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
AXLE ASS'Y, TAKEOUT FULLFLOAT(25) B1101-T B1101-T B1101-538T^---- ---- ---- ---- ---- ----
AXLE ASS'Y, TAKEOUT SEMIFLOAT (41) ---- ---- 2A1101-T^^ 2A1101-T ---- ---- ---- ---- ----
AXLE ASS'Y, TAKEOUT SEMIFLOAT (44) ---- ---- ---- 3A1101-T 3A1101-T 3A1101-T 3A1101-T 3A1101-T 3A1101-T
AXLE ASS'Y, TAKEOUT SEMIFLOAT (44)LATE* ---- ---- ---- ---- ---- 3B1101-19T 3B1101-19T 3B1101-19T ----
GASKET, DIFFERENTIAL COVER (MODEL 25) B1003 B1003 B1003^ ---- ---- ---- ---- ---- ----
GASKET,DIFFERENTIAL COVER (MODEL 41) ---- ---- 2A1103^^ 2A1103 ---- ---- ---- ---- ----
GASKET, DIFFERENTIAL COVER (MODEL 44) ---- ---- ---- C1103 C1103 C1103 C1103 C1103 C1103
BEARING CONE, CARRIER SIDE (MODEL 25) B1005 B1005 B1005^ ---- ---- ---- ---- ---- ----
BEARING CUP, CARRIER SIDE (MODEL 25) B1006 B1006 B1006^ ---- ---- ---- ---- ---- ----
BEARING CONE, CARRIER SIDE (41 & 44) ---- ---- 2A1105^^ 2A1105 2A1105 2A1105 2A1105 2A1105 2A1105
BEARING CUP, CARIER SIDE (41 & 44) ---- ---- 2A1106^^ 2A1106 2A1106 2A1106 2A1106 2A1106 2A1106
WASHER, THRUST SIDE GEAR DIFF (25) B1007 B1007 B1007^ ---- ---- ---- ---- ---- ----
WASHER, THRUST SIDE GEAR(41 & 44) ---- ---- 2A1107^^ 2A1107 2A1107 2A1107 2A1107 2A1107 2A1107
GEAR & PINION, RING 4:88 RATIO (25) B1008-488 B1008-488 B1008-488^ ---- ---- ---- ---- ---- ----
GEAR & PINION, RING 5:38 RATIO (25) ---- ---- B1008-538^ ---- ---- ---- ---- ---- ----
GEAR & PINION, RING 5:38 RATIO (41) ---- ---- 2A1108-538^^ 2A1108-538 ---- ---- ---- ---- ----
GEAR & PINION, RING 5:38 RATIO (44) ---- ---- ---- 3A1108-538 3A1108-538 3A1108-538 3A1108-538 3A1108-538 3A1108-538
GEAR SET, SPIDER (DIFFERENTIAL)(25) B1009 B1009 B1009^ ---- ---- ---- ---- ---- ----
GEAR SET, SPIDER (DIFF)(41 & 44) ---- ---- 2A1109^^ 2A1109 2A1109 2A1109 2A1109 2A1109 2A1109
GEAR SET, SPIDER (DIFF)(41 & 44) LATE ---- ---- ---- ---- ---- 3B1109 3B1109 3B1109 ----
SHAFT, SPIDER GEAR DIFF (25) B1010 B1010 B1010^ ---- ---- ---- ---- ---- ----
SHAFT, SPIDER GEAR DIFF (41 & 44) ---- ---- 2A1110^^ 2A1110 2A1110 2A1110 2A1110 2A1110 2A1110
SHIM KIT,CARRIER & PINION B1011 B1011 B1011 B1011 B1011 B1011 B1011 B1011 B1011
BEARING CONE, PINION INNER B1013 B1013 B1013 B1013 B1013 B1013 B1013 B1013 B1013
BEARING CUP, PINION INNER B1014 B1014 B1014 B1014 B1014 B1014 B1014 B1014 B1014
BEARING CONE, PINION OUTER B1015 B1015 B1015 B1015 B1015 B1015 B1015 B1015 B1015
BEARING CUP, PINION OUTER B1016 B1016 B1016 B1016 B1016 B1016 B1016 B1016 B1016
SEAL, PINION SHAFT B1017 B1017 B1017 B1017 B1017 B1017 B1017 B1017 B1017
GASKET, PINION SHAFT (BEHIND SEAL) B1017-G B1017-G B1017-G B1017-G B1017-G B1017-G B1017-G B1017-G B1017-G
SHIM KIT, PINION SHAFT B1018 B1018 B1018 B1018 B1018 B1018 B1018 B1018 B1018
NUT, PINION SHAFT B1019 B1019 B1019 B1019 B1019 B1019 B1019 B1019 B1019
YOKE & SMALL SHIELD, PINION SHAFT B0807-F B0807-F B0807-F B0807-F B0807-F B0807-F B0807-F B0807-F B0807-F
YOKE & LARGE SHIELD, PINION SHAFT (LATE) 3B1120 3B1120 3B1120 3B1120 3B1120 3B1120 3B1120 3B1120 3B1120
SLINGER, PINION SHAFT B1030 B1030 B1030 B1030 B1030 B1030 B1030 B1030 B1030
SEAL, INNER AXLE SHAFT (MODEL 25) B1021 B1021 B1021^ ---- ---- ---- ---- ---- ----
SEAL, INNER AXLE SHAFT (MODELS 41 & 44) ---- ---- 2A1121^^ 2A1121 2A1121 2A1121 2A1121 2A1121 2A1121
SHAFT, AXLE LEFT (MODEL 25) B1122-L B1122-L B1122-L^ ---- ---- ---- ---- ---- ----
SHAFT, AXLE RIGHT(MODEL 25) B1122-R B1122-R B1122-R^ ---- ---- ---- ---- ---- ----
SHAFT, AXLE LEFT SEMI-FLOAT (41 & 44) ---- ---- 2A1122-L^^ 2A1122-L 2A1122-L* 2A1122-L* 2A1122-L* 2A1122-L* 2A1122-L*
SHAFT, AXLE RIGHT SEMI-FLOAT (41 & 44) ---- ---- 2A1122-R^^ 2A1122-R 2A1122-R* 2A1122-R* 2A1122-R* 2A1122-R* 2A1122-R*
SHAFT, AXLE LEFT SEMI FLOAT (44) LATE (19 SPLINE) ---- ---- ---- ---- 3B1122-L* 3B1122-L* 3B1122-L* ----
SHAFT, AXLE RIGHT SEMI FLOAT (44) LATE (19 SPLINE) ---- ---- ---- ---- 3B1122-R* 3B1122-R* 3B1122-R* ----
SEAL & GASKET KIT, AXLE SHAFT(41 & 44) ---- ---- 2A1128^^ 2A1128 2A1128 2A1128 2A1128 2A1128 2A1128
SEAL, MODEL 25 AXLE HUB B1339 (2-7/8"DIA)** B1332 B1332 B1332^ B1332 B1332 B1332 B1332 B1332 B1332
HUB, MODEL 25 FULL FLOAT AXLE (NO DRUM)** B1339 B1339 B1339^ ---- ---- ---- ---- ---- ----
HUB, REAR SEMI-FLOAT MODELS 41 & 44 ---- ---- C1340^^ C1340 C1340 C1340 C1340 C1340 C1340
CAP, DUST REAR (LIKE A DERBY)(41 & 44) ---- ---- B1327^^ B1327 B1327 B1327 B1327 B1327 B1327
GASKET ONLY, HUB GREASE RETAINER (25) B1040 B1040 B1040^ ---- ---- ---- ---- ---- ----
GASKET ONLY, HUB RETAINER (41 & 44) ---- ---- 2A1134^^ 2A1134 2A1134 2A1134 2A1134 2A1134 2A1134
COVER, AXLE DIFFERENTIAL REAR (25) B1035 B1035 B1035^ ---- ---- ---- ---- ---- ----
COVER, AXLE DIFFERENTIAL REAR (41) ---- ---- 2A1135^^ 2A1135 ---- ---- ---- ---- ----
COVER, AXLE DIFFERENTIAL REAR (25) ---- ---- ---- C1135 C1135 C1135 C1135 C1135 C1135
SHIM SET, BEARING AXLE SHAFT (41 & 44) ---- ---- 2A1137^^ 2A1137 2A1137 2A1137 2A1137 2A1137 2A1137
NUT, AXLE SHAFT END (41 & 44) ---- ---- 2A1142^^ 2A1142 2A1142 2A1142 2A1142 2A1142 2A1142
^(25)= MODEL 25 FULL FLOAT AXLE (MB/GPW WITH 4:88 RING & PINION, EARLY CJ2A BEFORE S/N 13453 WITH 5:38 RING & PINION)
^^(41)= MODEL 41 SEMI-FLOAT REAR AXLE (LATE CJ2A AFTER S/N 13453, EARLY CJ3A UP TO S/N 62488)
(44)= MODEL 44 SEMI-FLOAT REAR AXLE (LATE CJ3A AFTER S/N 62488, CJ5, CJ6, M38, M38A1, M170)
**B1339 & B1332 WERE THE MOST COMMON ORIGINAL APPLICATIONS FOR FULL FLOAT AXLES.
LARGER SEAL (3" DIA) 3B1332 & HUB 3B1339 LATER SHOWED UP AS REPLACEMENTS, SEE GROUP 13 WHEELS & HUBS.
* CJ3B UP TO S/N 57348-33148, CJ5 UP TO S/N 57548-43843, CJ6 UP TO S/N 57748-11871 USED SEMI FLOAT AXLE SHAFTS 2A1122-L & 2A1122-R.
AFTER THESE SERIAL NUMBERS, USE 3B1122-L & 3B1122-R.
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 28
GROUP 11: REAR AXLE
ORDER NUMBERS
1. B1021
2. B1011
3. B1004
4. B1005
5. B1006
6. B1008-488
7. B1013
8. B1014
9.,11. B1018
14. B1016
15. B1015
16. B1030
17. B1017-G
18. B1017
19. B1020
21. B1019
23. B1102-N
24. B1332
25. B1319
26 . B1320
27 . B1342
28. B1328
29. B1341
30. B1214, B1339
31. B1316,B1317
32. B1040
35. B1122-R
36. B1045
37,38. B1009
39,40. B1009
DANA 25 41. B1035-VENT
FULL FLOATING REAR AXLE 46. B1035
MB, GPW & EARLY CJ2A UP TO 47. B1003
SERIAL NUMBER 13453 48. B1029
ORDER NUMBERS
1. 2A1106
2. 2A1105
3. B1011
4. 2A1104
5. 2A1108-538
6. B1013
7. B1014
8.,10. B1018
12.B1016
13.B1015
14.B1030
15.B1017-G
16.B1017
17.B1020
19.B1019
20. 2A1121
21.2A1323
22.2A1324
23.2A1137
25.2A1142
26.2A1343
28.B1214, C1340
33.2A1134
DANA 41 33,34. 2A1128
SEMI FLOAT REAR AXLE 36.B1603-ZERK
CJ3A & LATE CJ2A AFTER 40.2A1122-R
SERIAL NUMBER 13453 41.2A1107
42,43,44. 2A1109
45.2A1103
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 29
GROUP 12: BRAKES
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
SHOE SET, BRAKE(FOR 1 AXLE or 2 HUBS) B1202-AXLE B1202-AXLE B1202-AXLE B1202-AXLE B1202-AXLE 3B1202AXLE 3B1202AXLE 3B1202AXLE 3B1202AXLE
CYLINDER, MASTER B1203 B1203 B1203> 3A1203 3A1203 3A1203 3A1203 3A1203 3A1203
CAP ONLY, MASTER CYLINDER B1203-CAP B1203-CAP B1203-CAP B1203-CAP B1203-CAP B1203-CAP B1203-CAP B1203-CAP B1203-CAP
EYEBOLT, MC END PLUNGER; ALSOUSE # B1203-EB B1203-EB B1203-EB B1203-EB B1203-EB B1203-EB B1203-EB B1203-EB B1203-EB
ACTUATOR, MC END PLUNGER ROD (#) B1203-ACT B1203-ACT B1203-ACT B1203-ACT B1203-ACT B1203-ACT B1203-ACT B1203-ACT B1203-ACT
BOOT(BELLOWS), MAS CYL ACTUATOR ROD B0317-R B0317-R B0317-R B0317-R B0317-R B0317-R B0317-R B0317-R B0317-R
FITTING, DUAL BRASS FLARE MC END B1203-FIT B1203-FIT B1203-FIT B1203-FIT B1203-FIT B1203-FIT B1203-FIT B1203-FIT B1203-FIT
BOLT & WASHERS, FLUID FEED MAS CYL B1203-BW B1203-BW B1203-BW B1203-BW B1203-BW B1203-BW B1203-BW B1203-BW B1203-BW
CYLINDER, WHEEL FRONT B1204** B1204** B1204** B1204** C1204** C1204~** C1204~** C1204~** C1204**
CYLINDER, WHEEL REAR B1205** B1205** B1205** B1205** C1205** C1205~** C1205~** C1205~** C1205**
CYLINDER, WHEEL FRONT LATE LEFT ---- ---- ---- ---- ---- 3B1204-L~ 3B1204-L~ 3B1204-L~ ----
CYLINDER, WHEEL FRONT LATE RIGHT ---- ---- ---- ---- ---- 3B1204-R~ 3B1204-R~ 3B1204-R~ ----
CYLINDER, WHEEL REAR LATE LEFT ---- ---- ---- ---- ---- 3B1205-L~ 3B1205-L~ 3B1205-L~ ----
CYLINDER, WHEEL REAR LATE RIGHT ---- ---- ---- ---- ---- 3B1205-R~ 3B1205-R~ 3B1205-R~ ----
LINE, BRAKE FRONT KNUCKLE “S” (PIGTAIL) B1206** B1206** B1206** B1206** B1206** B1206** B1206** B1206** B1206**
REPAIR KIT, MASTER CYLINDER B1207 B1207 B1207 B1207 B1207 B1207 B1207 B1207 B1207
REPAIR KIT, CYLINDER WHEEL FRONT 1" B1208 B1208 B1208 B1208 B1208 B1208 B1208 B1208 B1208
REPAIR KIT, CYLINDER WHL REAR 3/4" B1209 B1209 B1209 B1209 B1209 B1209 B1209 B1209 B1209
SCREW, BLEEDER WHEEL CYLINDER B1210*** B1210*** B1210*** B1210*** C1210*** C1210*** C1210*** C1210*** C1210***
HOSE, BRAKE FRONT KNUCKLE 6" B1211** B1211** B1211** B1211** B1211** B1211** B1211** B1211** B1211**
HOSE, BRAKE FRONT AXLE 11" B1212 B1212 B1212 B1212 B1212 B1212 B1212 B1212 B1212
HOSE, BRAKE REAR AXLE 15" B1213 B1213 B1213 B1213 B1213 B1213 B1213 B1213 B1213
CLIP, ANCHORING FOR BRAKE HOSE END B1229**** B1229**** B1229**** B1229**** B1229**** B1229**** B1229**** B1229**** B1229****
TEE, BRAKE LINE AXLE BRASS B1215** B1215** B1215** B1215** B1215** B1215** B1215** B1215** B1215**
DRUM ONLY, BRAKE(NO HUB)FRT OR RR B1214*** B1214*** B1214*** B1214*** B1214*** 3B1214*** 3B1214*** 3B1214*** 3B1214***
SEAL, FULL FLOAT AXLE HUB B1339 (2-7/8"DIA)^^ B1332 B1332 B1332^^ B1332 B1332 B1332 B1332 B1332 B1332
SEAL, FULL FLAOT AXLE HUB FOR LATE 3B1339 (3" DIA) ---- ---- ---- ---- ---- 3B1332 3B1332 3B1332
HUB, FULL FLOAT FRONT AXLE (NO DRUM)^^ B1339 B1339 B1339 B1339 B1339 B1339 B1339 B1339 B1339
HUB, FULL FLOAT FRONT AXLE LEFT (NO DRUM) ---- ---- ---- ---- ---- 3B1339-L 3B1339-L 3B1339-L ----
HUB, FULL FLOAT FRONT AXLE RIGHT (NO DRUM) ---- ---- ---- ---- ---- 3B1339-R 3B1339-R 3B1339-R ----
HUB ONLY, SEMI FLOAT REAR AXLE (NO DRUM) --- ---- C1340^^ C1340 C1340 C1340 C1340 C1340 C1340
HUB ONLY, FULL FLOAT REAR AXLE (NO DRUM) B1339 B1339 B1339^^ ---- ----- ---- ---- ---- ----
BRAKE ASSEMBLY, EMERGENCY 2A1217~~ 2A1217~~ 2A1217 2A1217 2A1217 2A1217 2A1217 2A1217 ----
CABLE (ROD) ONLY, EMERGENCY BRAKE B1218 B1218 2A1218+ 2A1218 5E1218 2A1218 5E1218 5E1218 D1218
YOKE,ADJUST EMERGY BRAKE CABLE(ROD) END B0207-Y B0207-Y B0207-Y B0207-Y B0207-Y B0207-Y B0207-Y B0207-Y B0207-Y
HANDLE ONLY, EMERGENCY BRAKE ---- ---- ---- ---- ---- ---- ---- ---- D1219
HANDLE & CABLE ASS’Y , EMER. BRAKE B1220 B1220 B1220 B1220 B1220 B1220 ---- ---- ----
CLIP KIT FOR B1220 HAND BRAKE ASS'Y B1220-CLPKT B1220-CLPKT B1220-CLPKT B1220-CLPKT B1220-CLPKT B1220-CLPKT ---- ---- ----
DRUM ONLY, BRAKE EMERGENCY 2A1222~~ 2A1222~~ 2A1222 2A1222 2A1222 2A1222 2A1222 2A1222 D1222
DRUM, EMGCY BRAKE EXTERNAL CONTRACTING B1222 B1222 --- ---- ---- ---- ---- ---- ----
SPG, BRAKE EMGCY SHOE RETURN VERT 2A1223-V~~ 2A1223-V~~ 2A1223-V 2A1223-V 2A1223-V 2A1223-V 2A1223-V 2A1223-V ----
SPG, BRAKE EMGCY SHOE HORIZONTAL 2A1223-H~~ 2A1223-H~~ 2A1223-H 2A1223-H 2A1223-H 2A1223-H 2A1223-H 2A1223-H ----
SPG, BRAKE EMGCY RATCHET INTERNAL 2A1223-R~~ 2A1223-R~~ 2A1223-R 2A1223-R 2A1223-R 2A1223-R 2A1223-R 2A1223-R ----
GUIDE & SPRING, EMER. BRAKE HANDLE B1226 B1226 B1226 B1226 B1226 B1226 ---- ---- ----
SHOE SET, EMGCY BRAKE INTERNAL EXPANDIING 2A1227~~ 2A1227~~ 2A1227 2A1227 2A1227 2A1227 2A1227 2A1227 D1227
SHOE (BAND), EMGCY BRAKE EXTERNAL CONTRACTING B1227 B1227 ---- ---- ---- ---- ---- ---- ----
SPRING, EMGCY HANDLE BRAKE RETRACT B0216 B0216 B0216 B0216 B0216 B0216 B0216 B0216 D1228
SPRING, EMGCY BRAKE RETR.(ALTERNATE) B1228-SPG B1228-SPG B1228-SPG B1228-SPG B1228-SPG B1228-SPG B1228-SPG B1228-SPG -----
ECCENTRIC BOLT, UPPER BRAKE ***** B1230 B1230 B1230 B1230 B1230 3B1230 3B1230 3B1230 3B1230
SPRING, BRAKE WHEEL CYL END RETURN B1231*** B1231*** B1231*** B1231*** B1231*** B1231*** B1231*** B1231*** B1231***
SPRING, BRAKE ANCHOR END RETURN ---- ---- ---- ---- ---- 3B1231*** 3B1231*** 3B1231*** 3B1231***
PIN (BOLT), ADJUSTING BRAKE SHOE B1236***** B1236***** B1236***** B1236***** B1236***** ---- ---- ---- ----
CAM, ANCHOR PIN (BOLT) BRAKE SHOE B1237***** B1237***** B1237***** B1237***** B1237***** ---- ---- ---- ----
LINES KIT, BRAKE 3/16" STEEL B1234 B1234 B1234 C1234 C1234 D1234 5E1234 6E1234 D1234
CLIP KIT, BRAKE LINE TO FRAME (GENERIC) B1224 B1224 B1224 B1224 B1224 B1224 B1224 B1224 B1224
CLAMP KIT, BRAKE LINE TO AXLETUBE B1047 B1047 B1047 B1047 B1047 B1047 B1047 B1047 B1047
PEDAL, BRAKE FOOT (EARLY CAST PAD) B1216-E>> B1216-E>> ---- ---- ---- ---- ---- ---- ----
PEDAL, BRAKE FOOT (SHEETMETAL PAD) B1216-L>> B1216-L>> B1216-L B1216-L B1216-L B1216-L B1216-L B1216-L B1216-L
ARM, BRAKE PEDAL FORGED B1235 B1235 B1235 3A1235 3A1235 3A1235 3A1235 3A1235 3A1235
WASHER, FOOT PEDAL/FLOOR SEAL B0244-1** B0244-1** B0244-1** B0244-1** B0244-1** B0244-1** B0244-1** B0244-1** B0244-1**
SPRING, WASHER FOOT PEDAL SEAL ** B0244-SPG B0244-SPG B0244-SPG B0244-SPG B0244-SPG B0244-SPG B0244-SPG B0244-SPG B0244-SPG
SPRING, BRAKE PEDAL RETRACTING B0216 B0216 B0216 B0216 B0216 B0216 B0216 B0216 B0216
PLATE, COVER BODY TUB FLOOR MC B1837 B1837 B1837 B1837 C1837 B1837 C1837 C1837 C1837
REQUIREMENTS PER VEHICLE: If no * after part number description RPV=1; **=2 rpv; ***=4 rpv; ****=6RPV; *****=8 RPV
> CJ2A AFTER 215649 USES 3A1203 & 3A1203-EB. >> LATE 1945 MB/GPW USED B1216-L.
+ CJ2A UP TO S/N 183498 USED B1218. B1218 IS A CABLE WITH A BALL END ON IT. IF YOU NEED A CABLE WITH A SOCKET END SEE 2A1218.
^ LATE CJ2A AFTER 215649 USED 3A1221 (647592). BEFORE 215649 USED B1221 (A-1354)
^^ EARLY CJ2A (UP TO 13453) WITH FULL FLOAT REAR AXLE USES B1339 & B1332. FOR ALL SEMI-FLOAT REAR AXLES USE C1340.
B1339 & B1332 ARE THE MOST COMMON FOR FRONT AXLE APPLICATIONS, & MOST COMMON FOR MB GPW CJ2A FULL FLOAT REAR AXLE APPLICATIONS.
~ EARLY CJ3B'S, CJ5'S & CJ6'S USED C1204 & C1205. LATE VERSIONS OF THESE VEHICLES USED 3B1204-L, 3B1204-R, 3B1205-L & 3B1205-R.
~~ ONLY USED ON 1943-45 MB/GPW WITH CIVILIAN STYLE INTERNAL EXPANDING EMERGENCY BRAKE SHOES LIKE ON CIVILIAN JEEPS.
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 30
GROUP 12: BRAKES
EARLY EXTERNAL CONTRACTING
EMERGENCY BRAKE ARRANGEMENT SHOWN MB & GPW BRAKE SYSTEM
98
99.
100.
B1227-SP
B1206
B1234 MB, GPW, CJ2A, CJ3A, M38
SERVICE SHOE ARRANGEMENT
(SEE BELOW)
5 6
ORDER NO.
3. 2A1222 MB, GPW, CJ2A, CJ3A M38 7
4. 2A1227
6. 2A1223-R 1. B1204, B1205 1. C1204, C1205
7. 2A1223-V 2. B1231 2. B1231 ORDER NO.
13. 2A1223-H 3. B1202-AXLE 3. B1202-AXLE
4. B1230 4. B1230 1. 3B1202-AXLE
5. B1202-AXLE 5. B1202-AXLE 2. B1231 (UPPER)
INTERNAL EXPANDING EMERGENCY 6. B1237 6. B1237
BRAKE ARRANGEMENT 2. 3B1231(LOWER)
LATE MB & GPW ALL CJ'S & M38
7. B1236 7. B1236 9. 3B1230
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 31
GROUP 13: WHEELS & HUBS
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
TIRE, 600x16 MILITARY NDT TREAD++ B1305 B1305 B1305 B1305 ---- B1305 B1305 B1305 ----
TIRE, 600x16 MILITARY NDT TREAD- FORD SCRIPT++ G1302 G1302 ---- ---- ---- ---- ---- ---- ----
TIRE, 700x16 MILITARY NDCC TREAD++ ---- ---- ---- ---- C1311 ---- ---- ---- C1311
TIRE, 700x16 MILITARY NDT TREAD++ ---- ---- ---- ---- C1311-NDT ---- ---- ---- C1311-NDT
TIRE, 700x15 MILITARY NDCC TREAD++ B1312 B1312 B1312 B1312 B1312 B1312 B1312 B1312 B1312
CHAIN, TIRE+ B1335 B1335 B1335 B1335 B1335 B1335 B1335 B1335 B1335
TUBE, 600 to 750 x16++ B1306 B1306 B1306 B1306 B1306 B1306 B1306 B1306 B1306
TUBE, 600 TO 750 x 15++ B1306-15 B1306-15 B1306-15 B1306-15 B1306-15 B1306-15 B1306-15 B1306-15 B1306-15
CAP, TUBE STEM METAL W/CORE FORK++ B1306-CAP B1306-CAP B1306-CAP B1306-CAP B1306-CAP B1306-CAP B1306-CAP B1306-CAP B1306-CAP
PROTECTOR, METAL TUBE VALVE STEM++ B1331 B1331 B1331 B1331 B1331 B1331 B1331 B1331 B1331
FLAP, 600 to 750x16++ B1307 B1307 B1307 B1307 B1307 B1307 B1307 B1307 B1307
RIM, WWII COMBAT SPLIT++ B1313 B1313 ---- ---- ---- ---- ---- ---- ----
DATA PLATE, COMBAT RIM WARNING++ B1313-W B1313-W ---- ---- ---- ---- ---- ---- ----
STUD FOR B1313 WWII COMBAT SPLIT RIM@ B1313-S B1313-S ---- ---- ---- ---- ---- ---- ----
NUT FOR SPLIT RIM STUD B1313-S@ B1313-N B1313-N ---- ---- ---- ---- ---- ---- ----
RIM, POSTWAR SLOTTED 16" NEW++ 2A1314 2A1314 2A1314 2A1314 2A1314 2A1314 2A1314 2A1314 2A1314
NUT, LUG LEFT HAND THREAD# B1316 B1316 2A1316 2A1316 2A1316 2A1316 2A1316 2A1316 2A1316
NUT, LUG RIGHT HAND THREAD## B1317 B1317 2A1317 2A1317 2A1317 2A1317 2A1317 2A1317 2A1317
STUD, HUB LUG LEFT HAND THREAD# B1337 B1337 B1337 B1337 B1337 B1337 B1337 B1337 B1337
STUD, HUB LUG RIGHT HAND THREAD## B1338 B1338 B1338 B1338 B1338 B1338 B1338 B1338 B1338
STYD (WHEEL) LOCK WITH H700 KEY, SPARE TIRE B1325 B1325 B1325 B1325 B1325 B1325 B1325 B1325 B1325
BEARING,CONE WHL FRT INNER or OUTER+ B1319 B1319 B1319 B1319 B1319 B1319 B1319 B1319 B1319
BEARING,CUP WHL FRT INNER or OUTER+ B1320 B1320 B1320 B1320 B1320 B1320 B1320 B1320 B1320
BEARING,CONE WHL RR INNER or OUTER+ B1319 B1319 2A1323 2A1323 2A1323 2A1323 2A1323 2A1323 2A1323
BEARING,CUP WHL REAR INNER or OUTER+ B1320 B1320 2A1324 2A1324 2A1324 2A1324 2A1324 2A1324 2A1324
NUT, BEARING LOCK FRONT AXLE+ B1328 B1328 B1328 B1328 B1328 B1328 B1328 B1328 B1328
NUT, BEARING LOCK REAR AXLE+ B1328 B1328 ---- ---- ---- ---- ---- ---- ----
WRENCH, NUT BEARING WHEEL* B2234 B2234 B2234 B2234 B2234 B2234 B2234 B2234 B2234
NUT, AXLE SHAFT REAR** ---- ---- 2A1142 2A1142 2A1142 2A1142 2A1142 2A1142 2A1142
CAP, HUB DUST FRONT or REAR** B1327 B1327 B1327 B1327 B1327 B1327 B1327 B1327 B1327
HUB, MODEL 25 FRONT FULL FLOAT AXLE (NO DRUM OR STUDS)** B1339 B1339 B1339 B1339 B1339 B1339 B1339 B1339 B1339
HUB, MODEL 25 FRONT FULL FLOAT AXLE LATE LEFT (NO DRUM) LATE ---- ---- ---- ---- ---- 3B1339-L 3B1339-L 3B1339-L ----
HUB, MODEL 25 FRONT FULL FLOAT AXLE LATE RIGHT(NO DRUM) LATE ---- ---- ---- ---- ---- 3B1339-R 3B1339-R 3B1339-R ----
SEAL, MODEL 25 FULL FLOAT AXLE HUB B1339 (2-7/8"DIA)** B1332 B1332 B1332 B1332 B1332 B1332 B1332 B1332 B1332
SEAL, MODEL 25 FULL FLOAT AXLE LATE HUB 3B1339 (3" DIA)** ---- ---- ---- ---- ---- 3B1332 3B1332 3B1332 ----
HUB ONLY, REAR MODEL 25 FULL FLOAT AXLE (No drum/studs)** B1339 B1339 B1339^ ---- ---- ---- ---- ---- ----
HUB ONLY, REAR ((41 & 44) SEMI- FLOAT AXLE (No drum/studs)** ---- ---- C1340^ C1340 C1340 C1340 C1340 C1340 C1340
SEAL, REAR MODELS ((41 & 44) SEMI- FLOAT AXLE HUB ---- ---- 2A1128^ 2A1128 2A1128 2A1128 2A1128 2A1128 2A1128
WASHER, BEARING NUT LOCK FRT AXLE** B1341 B1341 B1341 B1341 B1341 B1341 B1341 B1341 B1341
WASHER, BEARING NUT LOCK REAR AXLE** B1341 B1341 ---- ---- ---- ---- ---- ---- ----
WASHER, BEARING BACK FRONT AXLE** B1342 B1342 B1342 B1342 B1342 B1342 B1342 B1342 B1342
WASHER, BEARING BACK REAR AXLE** B1342 B1342 ---- ---- ---- ---- ---- ---- ----
WASHER, AXLE SHAFT REAR NUT** ---- ---- 2A1343 2A1343 2A1343 2A1343 2A1343 2A1343 2A1343
^(25)= MODEL 25 FULL FLOAT AXLE (MB/GPW WITH 4:88 RING & PINION, EARLY CJ2A BEFORE S/N 13453 WITH 5:38 RING & PINION)
^(41)= MODEL 41 SEMI-FLOAT REAR AXLE (LATE CJ2A AFTER S/N 13453, EARLY CJ3A UP TO S/N 62488)
(44)= MODEL 44 SEMI-FLOAT REAR AXLE (LATE CJ3A AFTER S/N 62488, CJ5, CJ6, M38, M38A1, M170)
B1339 & B1332 WERE THE MOST COMMON APPLICATIONS FOR FULL FLOAT AXLES. 3B1332 & 3B1339 SHOWED UP AS REPLACEMENTS.
ORDER NO.
REQUIREMENTS PER VEHICLE 2. C1340
LATE CJ2A, CJ3A
3. B1214
*=1 RPV **=2 RPV REAR HUB 4. B1337
+=4 RPV ++=5RPV B1338
#=10 RPV ##=15 RPV 5. 2A1323
30
6. 2A1324
@=25 RPV 17. B1339
18. B1214
19. B1337
B1338
20. B1319
21. B1320
22. B1342
23. B1341
24. B1328
25. B1332
26. B1327
27. B1316
B1317
MB, GPW FRONT OR REAR HUB; 2A1316
CJ2A, CJ3A, M38 FRONT ONLY 2A1317
30. 2A1128
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 32
GROUP 14: STEERING
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
BELL CRANK FOR 7/8" SHAFT ---- ---- 2A1401-L** 2A1401-L 2A1401-L 2A1401-L 2A1401-L 2A1401-L 2A1401-L
BELL CRANK FOR 3/4" SHAFT B1401 B1401 2A1401-E** ---- ---- ---- ---- ---- ----
BELL CRANK FOR 1 1/8" SHAFT ---- ---- ---- ---- ---- ---- 5E1401 5E1401 ----
REPAIR KIT, BELLCRANK (SHAFT) 7/8" ---- ---- 2A1402** 2A1402 2A1402 2A1402 2A1402 2A1402 2A1402
REPAIR KIT, BELLCRANK (SHAFT) 3/4" B1402 B1402 B1402** ---- ---- ---- ---- ---- ----
REPAIR KIT, BELLCRANK (SHAFT) 1-1/8" ---- ---- ---- ---- ---- ---- 5E1402 5E1402 ----
SOCKET, RIGHT TIE ROD; RIGHT END 11/16" B1407-R* B1407-R* B1407-R* B1407-R* ---- B1407-R* B1407-R* B1407-R* ----
SOCKET, RIGHT TIE ROD; LEFT END 11/16" B1407-L* B1407-L* 2A1408~* 2A1408~* ---- 2A1408~* 2A1408~* 2A1408~* ----
SOCKET, LEFT TIE ROD LEFT END 11/16" B1407-L* B1407-L* B1407-L* B1407-L* ---- B1407-L* B1407-L* B1407-L* ----
SOCKET, LEFT TIE ROD RIGHT END 11/16" B1407-R* B1407-R* B1407-R* B1407-R* ---- B1407-R* B1407-R* B1407-R* ----
SOCKET, RIGHT TIE ROD; RIGHT END 3/4" ---- ---- ---- ---- C1407-R ---- ---- ---- C1407-R
SOCKET, RIGHT TIE ROD; LEFTFT END 3/4" ---- ---- ---- ---- C1408~ ---- ---- ---- C1408~
SOCKET, LEFT TIE ROD; LEFT END 3/4" ---- ---- ---- ---- C1407-L ---- ---- ---- C1407-L
SOCKET, LEFT TIE ROD; RIGHT END 3/4" ---- ---- ---- ---- C1407-R ---- ---- ---- C1407-R
FELT DUST RINGS FOR TIE ROD SOCKETS ---- G1407-FELTS ---- ---- ---- ---- ---- ---- ----
TIE ROD, DRIVER SIDE WITHOUT SOCKETS B1440-L B1440-L 2A1440-L 2A1440-L C1440-L 2A1440-L 2A1440-L 2A1440-L C1440-L
TIE ROD, PASS SIDE WITHOUT SOCKETS B1440-R B1440-R 2A1440-R 2A1440-R C1440-R 2A1440-R 2A1440-R 2A1440-R C1440-R
ARM, STEERING GEAR (PITMAN) B1410 B1410 B1410 B1410 C1410 B1410 B1410 B1410 C1410
BEARING, STEERING COLUMN (TOP END) B1411 B1411 B1411 B1411 B1411 B1411 B1411 B1411 B1411
SHIM KIT, STEERING BOX TOP (THRUST) B1412 B1412 B1412 B1412 B1412 B1412 B1412 B1412 B1412
WHEEL, STEERING BLACK PLASTIC B1413-E^ B1413-E^ B1413-E^ B1413-E^ B1413-E^ B1413-E^ B1413-E^ B1413-E^ B1413-E^
WHEEL, STEERING LATE SPOKED B1413-L+ B1413-L+ ---- ---- ---- ---- ---- ---- ----
WHEEL,STEERING 2-3/8"DIA HORN BUTTON ---- ---- ---- ---- ---- ---- 5L1413^^ 5L1413^^ ----
BUTTON KIT, HORN (TOP OF COLUMN) SMALL B0638 B0638 B0638 B0638 C0638 3B0638** 3B0638** 3B0638** C0638
RING,BRASS HORN CONTACT STG COL B1429 B1429 B1429@ ---- ---- ---- ---- ---- ----
BRUSH, HORN STEERING COLUMN SIDE B0635 B0635 B0635 ---- ---- ---- ---- ---- ----
SWITCH, HORN AT BOTTOM STG COL ---- ---- ---- ---- C0635 ---- ---- ---- C0635
CAP, RUBBER HORN BUTTON FOR C0638-N ---- ---- ---- ---- C0638-C C0638-C C0638-C C0638-C C0638-C
NUT FOR HORN BUTTON CAP C0638-C ---- ---- ---- ---- C0638-N C0638-N C0638-N C0638-N C0638-N
BUTTON KIT, HORN FOR WHEEL 5L1413^^ ---- ---- ---- ---- ---- ---- 5L0638 5L0638 ----
CLAMP, STEERING COL TO DASH BRACKET B1415 B1415 B1415 B1415 B1415 B1415 5E1415 5E1415 5E1415
WELT KIT, STEERING COLUMN TO BODY B1441 B1441 B1441 B1441 B1441 B1441 B1441 B1441 B1441
WASHER, STEERING COL TO FLOOR LEATHER LATE B1416-L B1416-L ---- ---- ---- ---- ---- ---- ----
WASHER,STEERING COL /FLOOR RUBBER EARLY B1416-R B1416-R ---- ---- ---- ---- ---- ---- B1416-R@@
WASHER,STEERING COL /FLOOR RUBBER STD ---- ---- B1416-R B1416-R B1416-R 5E1416 5E1416 5E1416 5E1416@@
RETAINER, RING STG COLUMN WASHER B1424 B1424 B1424 B1424 C1424 B1424 ---- ---- ----
GASKET KIT, ALL FLOOR SEALS RUBBER B1803-KT-R B1803-KT-R ----- ----- ----- ----- ----- ----- -----
BEARING KIT, STG BOX TOP (THRUST) B1417 B1417 B1417 B1417 B1417 B1417 B1417 B1417 B1417
REPAIR KIT, SECTOR SHAFT & PARTS++ B1414 B1414 B1414 B1414 C1414 B1414 B1414 B1414 D1414
BUSHING, SECTOR SHAFT OUTER++ B1419 B1419 B1419 B1419 C1419 B1419 B1419 B1419 C1419
BUSHING, SECTOR SHAFT INNER++ B1420 B1420 B1420 B1420 C1420 B1420 B1420 B1420 C1420
BEARING, CAM STG BALL (22 REQD) B1421 B1421 B1421 B1421 B1421 B1421 B1421 B1421 B1421
SEAL, SECTOR SHAFT++ B1422 B1422 B1422 B1422 C1422 B1422 B1422 B1422 C1422
SHAFT ONLY, SECTOR++ B1426 B1426 B1426 B1426 C1426 B1426 B1426 B1426 D1426
GASKET, COVER STEERING BOX++ B1432 B1432 B1432 B1432 B1432 B1432 B1432 B1432 B1432
STEERING COLUMNCOVER TUBE WITH BRUSH HOLE B1423 B1423 2A1423-E@ ----- ----- ----- ----- ----- -----
STEERING COLUMNCOVER TUBE; NO BRUSH HOLE ----- ----- 2A1423 2A1423 C1423 2A1423 2A1423 2A1423 C1423
STEERING COLUMN WITH (B1429) HORN RING B1425 B1425 2A1425-E@ ----- ----- ----- ----- ----- -----
STEERING COLUMN WITHOUT HORN RING ----- ----- 2A1425 2A1425 C1425 2A1425 2A1425 2A1425 D1425
WORM & SHAFT ONLY,STEERING COLUMN B1428 B1428 2A1428 2A1428 C1428 2A1428 2A1428 2A1428 D1428
DRAG LINK ASSEMBLY B1427 B1427 2A1427~~ 3A1427 3A1427 3A1427 3A1427 3A1427 3A1427
REPAIR KIT, DRAG LINK B1430 B1430 B1430 B1430 B1430 B1430 B1430 B1430 B1430
RIGHT MEANS PASSENGER SIDE (RT=RIGHT) LEFT MEANS DRIVERS SIDE OF VEHICLE (LFT=LEFT)
**GOOD PRACTICAL REPLACEMENT FOR C0638-C CAP, C0638-N NUT, C0638-ROD, & C0617 SWITCH ON AN M38, M38A1, OR M170.
^ B1413-E IS A BLACK PLASTIC STEERING WHEEL USED ON EARLY MB & GPW & ALL EARLY CIVILIAN JEEPS. B1413-E IS FINE FOR M38 & M38A1 HOWEVER SOME M38
& M38A1 STEERING WHEELS WERE OLIVE DRAB PLASTIC.
^^ 5L1413 LARGE 2-3/8" DIA. HORN BUTTON BLACK STEERING WHEEL WAS USED FROM MID 1964 & UP. USE B1413-E & B0638 FOR EARLIER CJ5.
+ B1413-L IS THE LATE WWII BARE SPOKED OLIVE DRAB RIM STEERING WHEEL FOR MB & GPW. ALSO FITS ALL OTHER JEEP STEERING COLUMNS.
++ BUSHINGS, GASKET, SEAL, & SECTOR SHAFT ARE INCLUDED IN KITS B1414, C1414, & D1414.
@USED ON CJ2A JEEPS UP TO SERIAL NUMBER 178361.
* ALL JEEPS EXCEPT M38, M38A1, & M170 USED 11/16" THREADS ON TIE RODS & TIE ROD ENDS. M38, M38A1 & M170 USED 3/4" THREADS. BE CAREFUL, TIE RODS ARE
INTERCHANGEABLE & MANY M38, M38A1 & M170 JEEPS ENDED UP WITH CIVILIAN TIE RODS.
** CJ2A UP TO S/N 199079 USED A 3/4" DIA. BELL CRANK SHAFT (ORDER KIT B1402) & BELL CRANK 2A1401-E. AFTER S/N 199079 CJ2A USED A 7/8" DIA. BELL CRANK
SHAFT (ORDER KIT 2A1402) & BELL CRANK 2A1401-L. IF YOUR CJ2A HAS A FRONT CAPSTAN WINCH, IT MAY BE USING A SPECIAL ORDER REVERSE 3/4" PIN BELL-
CRANK, OR A 7/8" 2A1401-L & 3A1427 DRAGLINK IN ORDER TO CLEAR THE WINCH PTO.
~ THIS TIE ROD END IS THE LARGE TIE ROD END WITH A SECOND HOLE IN IT FOR ADDITIONAL TIE ROD CONNECTION.
~~ IF YOU HAVE A CJ2A WITH A FRONT CAPSTAN WINCH & REVERSE BELLCRANK, YOU MUST USE 3A1427 DRAGLINK.
@@ B1416-R WAS USED ON M38A1 UP THROUGH S/N 71065. AFTER THAT USE 5E1416.
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 33
GROUP 15: FRAME
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
FRAME ASSEMBLY B1501^ G1501* 2A1501* 3A1501* C1501^ 3B1501* 5E1501 6E1501 D1501
MOUNT, SHOCK UPPER FRONT LEFT** B1502-L~ G1502-L~ B1502-L 3A1502 3A1502 3A1502 3A1502 3A1502 3A1502
MOUNT, SHOCK UPPER FRONT RIGHT** B1502-R~ G1502-R~ B1502-R 3A1502 3A1502 3A1502 3A1502 3A1502 3A1502
MOUNT, SHOCK UPPER REAR LEFT** B1503-L~ G1503~ B1503-L 3A1503 3A1503 3A1503 3A1503 3A1503 3A1503
MOUNT, SHOCK UPPER REAR RIGHT** B1503-R~ G1503~ B1503-R 3A1503 3A1503 3A1503 3A1503 3A1503 3A1503
BRACKET, PIN & SHACKLE,FRT TIEDOWN ** ---- ---- ---- ---- C1504 ---- ---- ---- C1504
BRACKET, PIN &SHACKLE,REAR TIEDOWN** ---- ---- ---- ---- C1505 ---- ---- ---- C1505
BRACKET, PIN & SHACKLE,REAR TIEDOWN ---- ---- ---- ---- E1504^ ---- ---- ---- E1504^
SNUBBER, SPRING (RUBBER ON FRAME)**** B1506 B1506 B1506 B1506 B1506 B1506 B1506 B1506 B1506
CROSS MEMBER, REAR FRAME B1508 G1508 2A1508 2A1508 2A1508 2A1508 2A1508 2A1508 D1508
RIVET KIT, REAR FRAME CROSSMEMBER B1508-R B1508-R B1508-R B1508-R B1508-R B1508-R B1508-R B1508-R B1508-R
"V" BRACE FOR PINTLE HOOK SUPPORT B1512 G1512 B1512 B1512 B1512 B1512 B1512 B1512 B1512
BRACKET, SPRING MOUNT PIVOT END** B1509 B1509 B1509 B1509 B1509 B1509 5E1509 5E1509 5E1509
BRACKET, SPRG MOUNT SHACKLE END** B1510 B1510 B1510 B1510 B1510 B1510 B1510 B1510 B1510
WELT KIT, FRAME TO BODY B1540 B1540 2A1540 2A1540 2A1540 2A1540 5E1540 6E1540 5E1540
WELT KIT, RADIATOR MOUNT TO FRAME B1540-RAD B1540-RAD B1540-RAD B1540-RAD B1540-RAD ---- ---- ---- ----
SHIELD, SPLASH FRAME/GENERATOR B1541 B1541 B1541 B1541 ---- ---- ---- ---- ----
* THESE FRAMES CAN INTERCHANGE WITH EACH OTHER WITH VARYING DEGREES OF MODIFICATION.
~ ALTHOUGH DIFFERENT IN CONSTRUCTION, FUNCTIONALLY B1502 & G1502 AND B1503 & G1503 ARE INTERCHANGEABLE RESPECTIVELY.
^ CLOSE BUT NOT EXACT REPLACEMENT FOR C1504 & C1505. INCLUDES SHACKLE BRACKET & PIN.
ONLY ONE PART NUMBER REQUIRED PER VEHICLE ABOVE UNLESS NOTED; **= 2RPV; ****= 4RPV NEXT TO PART NUMBER DESCRIPTION
ORDER NUMBERS
GROUP 14: STEERING 1. B1425
2. B1412
4. B1432, B1417, B1414
12 5. B1414, B1426
7. B1419, B1420, B1414
8. B1422, B1414
9. B1428, 2A1428
10. B1417
11. B1417
14 12. B1423
13. B1413-E,-L
13 14. B1411
MB, GPW, CJ2A 15. B0635
STEERING COLUMN 16. B1410
15 B1425 IS COLUMN ASS'Y LESS
SHOWN 16 STEERING WHEEL, B1410 PITMAN ARM,
AND B1423 COVER TUBE
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 34
GROUP 16: SUSPENSION
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
SPRING ASS'Y, FRONT WITH 5 LEAVES** ---- ---- ---- ---- ---- ---- 5E1601-5 5E1601-5 5E1601-5
SPRING ASS'Y, FRONT WITH 7 LEAVES** B1601-7 B1601-7 B1601-7 B1601-7 B1601-7 B1601-7 5E1601-7 5E1601-7 5E1601-7
SPRING ASS'Y, FRONT WITH 8 LEAVES** B1601-8 B1601-8 B1601-8 B1601-8 B1601-8 B1601-8 ---- ---- ----
SPRING ASS'Y, FRONT WITH 9 LEAVES** ---- ---- ---- ---- ---- ---- 5E1601-9 5E1601-9 5E1601-9
SPRING ASS'Y, FRONT WITH 10 LEAVES** B1601-10* B1601-10* B1601-10* B1601-10* B1601-10* B1601-10* 5E1601-10 5E1601-10 5E1601-10
SPRING ASS'Y, FRONT WITH 12 LEAVES** B1601-12 B1601-12 B1601-12 B1601-12 B1601-12 B1601-12 5E1601-12* 5E1601-12* 5E1601-12*
SPRING ASS'Y, REAR WITH 9 LEAVES** B1602-9 B1602-9 B1602-9 B1602-9 B1602-9 B1602-9 5E1602-9 5E1602-9 5E1602-9
SPRING ASS'Y, REAR WITH 10 LEAVES** B1602-10 B1602-10 B1602-10 B1602-10 B1602-10 B1602-10 ---- ---- ----
SPRING ASS'Y, REAR WITH 11 LEAVES** B1602-11* B1602-11* B1602-11* B1602-11* B1602-11* B1602-11* 5E1602-11 5E1602-11 5E1602-11
SPRING ASS'Y, REAR WITH 12 LEAVES** ---- ---- ---- ---- ---- ---- 5E1602-12 5E1602-12 5E1602-12
SPRING ASS'Y, REAR WITH 13 LEAVES** ---- ---- ---- ---- ---- ---- 5E1602-13* 5E1602-13* 5E1602-13*
SHACKLE, SPRING ‘U’; LEFT & RIGHT THDS** B1603-L B1603-L B1603-L B1603-L B1603-L B1603-L B1603-L B1603-L B1603-L
SHACKLE,SPG ‘U’; BOTH ARMS RIGHT THD** B1603-R B1603-R B1603-R B1603-R B1603-R B1603-R B1603-R B1603-R B1603-R
SHACKLE KIT, SPRING CLOSED ‘U’ **** ---- ---- ---- ---- ---- 3B1603-SB 3B1603-SB 3B1603-SB ----
FITTING, GREASE NIPPLE LARGE (ZERK)**** B1603-ZERK B1603-ZERK B1603-ZERK B1603-ZERK B1603-ZERK B1603-ZERK B1603-ZERK B1603-ZERK B1603-ZERK
BOLT, SPRING PIVOT END FRONT/REAR**** B1604 B1604 B1604 B1604 C1604 B1604 B1604 B1604 C1604
NUT FOR SPRING PIVOT BOLT **** B1604-NUT B1604-NUT B1604-NUT B1604-NUT C1604-NUT B1604-NUT B1604-NUT B1604-NUT C1604-NUT
BUSHING, SPRING PIVOT END BOLT **** B1608 B1608 B1608 B1608 C1608 B1608 B1608 B1608 C1608
ABSORBER, SHOCK FRONT OR REAR **** B1605 B1605 B1605 B1605 B1605 B1605 B1605 B1605 B1605
BUSHING, SHOCK MOUNT RUBBER## B1612 B1612 B1612 B1612 B1612 B1612 B1612 B1612 B1612
BOLT, ’U’ AXLE TUBE FRONT(V) B1609 B1609 B1609 B1609 B1609 B1609 B1609 B1609 B1609
BOLT, ’U’ AXLE TUBE REAR (V) B1609 B1609 2A1610 2A1610 2A1610 2A1610 2A1610 2A1610 2A1610
BOLT, ’U’ AXLE DIFFERENTIAL HOUSING B1609-H B1609-H B1609-H B1609-H B1609-H B1609-H B1609-H B1609-H B1609-H
NUT, ’U’ BOLT AXLE TUBE DEEP TYPE# B1611 B1611 B1611 B1611 B1611 B1611 B1611 B1611 B1611
PLATE, SHOCK MOUNT FRONT LEFT B1614 B1614 B1614 B1614 B1614 B1614 B1614 B1614 B1614
PLATE, SHOCK MOUNT FRONT RIGHT B1615 B1615 B1615 B1615 B1615 B1615 B1615 B1615 B1615
PLATE, SHOCK MOUNT REAR LEFT B1616 B1616 2A1616 2A1616 2A1616 2A1616 2A1616 2A1616 2A1616
PLATE, SHOCK MOUNT REAR RIGHT B1614 B1614 2A1617 2A1617 2A1617 2A1617 2A1617 2A1617 2A1617
SPRING, TORQUE REACTION B1620 B1620 ---- ---- ---- ---- ---- ---- ----
BOLT, TORQUE REACTION LOWER B1620-L B1620-L ---- ---- ---- ---- ---- ---- ----
BOLT, TORQUE REACTION UPPER B1620-U B1620-U ---- ---- ASSUME
---- 1
---- RPV, UNLESS
---- NOTED.
---- ----
PLATE, LOCKING TORQUE REACTION B1620-LOCK B1620-LOCK ---- ----**= 2 RPV
---- ***=
---- 3 RPV
---- ****=4
---- RPV
----
NUT, TORQUE REACTION BOLTS** B1604-NUT B1604-NUT ---- ----V=VARIES---- ----#=32 RPV
---- ----##=16 RPV
----
SHACKLE, TORQUE REACTION INNER B1620-SI B1620-SI ---- ---- ---- ---- ---- ---- ----
SHACKLE, TORQUE REACTION OUTER B1620-SO B1620-SO ---- ---- ---- ---- ---- ---- ----
*MOST COMMON APPLICATION SUPPLIED WITH VEHICLE FROM MANUFACTURER AT TIME OF PRODUCTION
GENERAL 4 CYLINDER JEEP SUSPENSION ARRANGEMENT MB, GPW, CJ5, 6,
CJ2A, 3A, 3B, M38 M38A1, M170
1. FRONT SPRING: 1. FRONT SPRING:
17 5E1601-5
B1601-7
15 B1601-8 5E1601-7
B1601-10* 5E1601-9
B1601-12 5E1601-10
16 REAR SPRING: 5E1601-12*
B1602-9 REAR SPRING:
B1602-10 5E1602-9
B1602-11* 5E1602-11
5. B1608 5E1602-12
13 6. B1609, B1609-H, 2A1610 5E1602-13*
14 7. B1603-L, -R 5. B1608
8. B1510 6. B1609, B1609-H, 2A1610
9. B1509 8. B1510
20 12. B1605 9. B1509
22 13. B1614, B1615, B1616, 12. B1605
2A1616, 2A1617 13. B1614-17
23 24 14. B1611 14. B1611
15. B1603-L,-R 15. B1603-L,-R
16. 3B1603-SB 16. 3B1603-SB
17. B1506 17. B1506
20. B1608 20. B1608, C1608
21 21. B1603-L, -R 21. B1603-L, -R
* MOST COMMON AP- 22. B1618, B1603-L, -R 22. B1618, B1603-L, -R
PLICATION SUPPLIED FROM 23. B1603-L, -R 23. B1603-L, -R, B1618
MANUFACTURER 24. B1604, C1604 24. B1604, C1604
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 35
GROUP 17: HOOD, FENDERS, & GRILL
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
HOOD ASS'Y WITHOUT WILLYS STAMP B1701 B1701 B1701 B1701 C1701 3B1701 5E1701 5E1701 D1701
HOOD ASS'Y WITH WILLYS STAMP ---- ---- 2A1701-W 2A1701-W ---- 3B1701-W ---- ---- ----
HINGE FOR HOOD CENTER B1701-H B1701-H B1701-H B1701-H B1701-H B1701-H --- ---- ----
HINGE FOR HOOD LEFT (DRIVER) SIDE ---- ---- ---- ---- ---- ---- 5E1701-HL 5E1701-HL 5E1701-HL
RADIO SUPPRESSION GROUND STRAPS FOR HINGE B0656-5038 B0656-5038 ---- ---- ---- ---- ---- ---- ----
HINGE FOR HOOD RIGHT (PASSENGER) SIDE ---- ---- ---- ---- ---- ---- 5E1701-HR 5E1701-HR 5E1701-HR
HINGES, HOOD (PR) (L&R) STAINLESS REPLACEMENT ---- ---- ---- ---- ---- ---- 5E1701-H-RPL 5E1701-H-RPL 5E1701-H-RPL
CATCH, HOOD (FENDER TO HOOD) B1702 B1702 B1702 B1702 B1702 B1702 B1702 B1702 B1702
RECEPTACLE FOR CATCH B1702 & B1704 B1703 B1703 B1703 B1703 B1703 B1703 B1703 B1703 B1703
CATCH, WINDSHIELD HOLD DOWN B1704 B1704 ---- ---- ---- ---- ---- ---- ----
HOLDER, LUBRICATION CHART B1706 B1706 ---- ---- ---- ---- ---- ---- ----
GROMMET FOR LUBE CHART B1706 B1706-G B1706-G ---- ---- ---- ---- ---- ---- ----
LUBRICATION CHART, PAPER B2604 B2604 ---- ---- ---- ---- ---- ---- ----
LUBE CHART, LAMINATED METAL EDGED B2604-ME B2604-ME ---- ---- ---- ---- ---- ---- ----
FENDER, LEFT (DRIVER'S SIDE) B1707 B1707 2A1707 2A1707 C1707 3B1707 5E1707 5E1707 5E1707
FENDER, RIGHT (PASSENGER'S SIDE) B1708 B1708 2A1708 2A1708 C1708 3B1708 5E1708 5E1708 5E1708
GRILL, (PRESSED STEEL) STANDARD B1709 B1709 2A1709 3A1709-SM^ C1709 3B1709 5E1709 5E1709 D1709
GRILL, (WITH WILLYS STAMPING) ---- ---- ---- ---- ---- 3B1709-W ---- ---- ----
GRILL, EARLY WELDED WWII SLAT B1709-E ---- ---- ---- ---- ---- ---- ---- ----
GRILL, EARLY ---- ---- 2A1709-E^ 2A1709^ ---- ---- ---- ---- ----
BUG SCREEN FOR GRILL SLATS ---- ---- 2A1741 2A1741 ---- ---- ---- ---- ----
HINGE, GRILL PIVOT ---- ---- ---- ---- C1710 ---- ---- ---- C1710
WELT KIT, HOOD TO GRILL B1719 B1719 2A1719 2A1719 2A1719 3B1719 5E1719 5E1719 5E1719
WELT KIT, HOOD TO GRILL EARLY SLAT B1719-E ---- ---- ---- ---- ---- ---- ---- ----
WELT KIT, FENDER TO BODY B1739 B1739 B1739 B1739 B1739 B1739 5E1739 5E1739 5E1739
HAIR KIT, RADIATOR PRESSED GRILL B1732 B1732 2A1732 2A1732^ C1732 ---- ---- ---- ----
BLOCK, HOOD RUBBER EARLY WWII B1736 B1736 ---- ---- ---- ---- ---- ---- ----
BLOCK, HOOD WOOD B1737 B1737 2A1737 3A1737 3A1737 3A1737 ---- ---- ----
GUARD, HEAD LIGHT ----- ----- ----- ----- C1740 ----- ----- ----- -----
BRACKET, GREASE GUN (LATE HOOD) B2211 B2211 ---- ---- ---- ---- ---- ---- ----
GREASE GUN (LATE HOOD MOUNTED) B2211-G B2211-G (THIS IS AN ALTERNATE BRAND GREASE GUN) ---- ---- ----
GREASE GUN (LATE HOOD MOUNTED) B2211-G-LIN B2211-G-LIN (THIS IS A LINCOLN BRAND GREASE GUN) ---- ---- ---- ----
PLATE, BRIDGE KIT (YELLOW) B2115 B2115 B2115 B2115 B2115 B2115 B2115 B2115 B2115
PLATE, BRIDGE CHANGEABLE #'s S(OLIVE DRAB) C2115-SD C2115-SD C2115-SD C2115-SD C2115-SD C2115-SD C2115-SD C2115-SD C2115-SD
B1828-R, B1828-RSET B2301, B2301-ZF, B2301-Z
B1859-2, B1859 B2301, B2301-ZF, B2301-Z
B1814 B2301, B2301-ZF, B2301-Z
B1857 B1826
B1859-4, B1859 B1821, G1821
B1921 B1822, B1822-K
B1858
B2301, B2301-ZF, B2301-Z
B2306
B1935-B, B1935-C
B2086
B2009-KIT
B2006, B2007, G2007-KIT
B1859, B1859-1R
B1815
B1806-R B1736, B1737
B2301, B2301-ZF, B2301-Z
B1801-H, -KIT; G1801-H, -KIT
B1805-R
B2011 B0603-6, B0603-12
B1857, G1857 B0604
B2012
B1805-R, B1805-RS B1701
B2001, B2002, B2003
B1708 B1709
MB/GPW B1704
BODY PARTS B1702 B0622-B
B2022
B0604
^2A1709-E WAS FOR 1945-46 EARLY CJ2A WITH "BULLET" PARKING LIGHTS (20604 OR 2A0604-DF). 3A1709-SM WAS FOR LATER CJ3A WITH SIDE MOUNT
RADIATOR (3A0501-SM). 2A1709 IS FOR LATE CJ2A AND EARLY CJ3A WITH (2A0606 & 20607) PARKING LIGHTS & BOTTOM MOUNTED RADIATORS. 2A1732 IS FOR
BOTTOM MOUNTED RADIATORS ONLY. *C1710 WAS USED ON ALL M38 JEEP GRILLS & M38A1 JEEPS UP TO SERIAL NUMBER 60406.
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 36
FOR STARS, NUMBERS, & MARKINGS: SEE GROUP 24!
GROUP 18: BODY
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
BODY TUB ONLY,EARLY EARLY SCRIPT MARKED B1801-W G1801-F ----- ----- ----- ----- ----- ----- -----
BODY TUB ONLY,STANDARD PRODUCTION B1801 G1801 2A1801 3A1801 C1801 3B1801 5E1801 6E1801 D1801
BODY KIT WITH "SCRIPT" STAMPNGS B1801-W-KIT G1801-F-KIT 2A1801-W-KIT 3A1801-W-KIT ----- 3B1801-W-KIT 5E1801-W-KIT 6E1801-W-KIT -----
BODY KIT; NO "SCRIPT" MARKINGS B1801-KIT G1801-KIT 2A1801-KIT 3A1801-KIT C1801-KIT 3B1801-KIT 5E1801-KIT 6E1801-KIT D1801-KIT
WELT KIT, FRAME TO BODY B1540 B1540 2A1540 2A1540 2A1540 2A1540 5E1540 6E1540 5E1540
PAN, FLOOR FRONT ASSY W/ BRACES B1802 B1802 2A1802 2A1802 C1802 2A1802 5E1802 5E1802 D1802
COVER, DRAIN HOLE (BUTTERFLY) ----- ----- ----- ----- C1802-DHC ----- ----- ----- C1802-DHC
PLATE, TRANSMISSION COVER B1803 B1803 2A1803 2A1803 C1803 2A1803 2A1803 2A1803 C1803
GASKET, PLATE TRANSMISSION COVER B1803-G B1803-G ----- ----- ----- ----- ----- ----- -----
GASKET KIT, FUEL TANK TO GAS WELL RUBBER B0301-FSKT B0301-FSKT ----- ----- ----- ----- ----- ----- -----
GASKET KIT, FUEL TANK TO GAS WELL FELT ---- G0301-FSKT ----- ----- ----- ----- ----- ----- -----
GASKET KIT, ALL OTHER FLOOR SEALS RUBBER B1803-KT-R B1803-KT-R ----- ----- ----- ----- ----- ----- -----
PAN, FLOOR REAR W/ BRACES B1804 B1804 2A1804 2A1804 C1804 2A1804 5E1804 5E1804 D1804
RECEPTICAL, SEAT REAR FLOOR PANEL ----- ----- 2A1804-S 2A1804-S ----- 2A1804-S 2A1804-S 2A1804-S -----
PANEL, QUARTER FRONT LEFT EARLY ----- ----- B1805-L** ----- ----- ----- ----- ----- -----
PANEL, QUARTER FRONT LEFT STD PRODUCTION B1805-L B1805-L 2A1805-L 2A1805-L C1805-L 2A1805-L ----- ----- -----
PAD, STEP UP FRONT FENDER B1805-LS B1805-LS B1805-LS B1805-LS B1805-LS B1805-LS ----- ----- -----
PANEL, QUARTER FRONT RIGHT B1805-R B1805-R 2A1805-R 2A1805-R C1805-R 2A1805-R ----- ----- -----
PAD, STEP UP FRONT FENDER RIGHT B1805-RS B1805-RS B1805-RS B1805-RS B1805-RS B1805-RS ----- ----- -----
PANEL, QUARTER REAR LEFT EARLY ----- ----- B1806-L** ----- ----- ----- ----- ----- -----
PANEL, QUARTER REAR LEFT STD PRODUCTION B1806-L B1806-L 2A1806-L 2A1806-L C1806-L 2A1806-L ----- B1805-L-----or B1805-LS
-----
PANEL, QUARTER REAR RIGHT B1806-R B1806-R 2A1806-R 2A1806-R C1806-R 2A1806-R ----- ----- -----
TEMPLATE, SIDE PANEL HOLES MB/GPW B1806-TMP* B1806-TMP* B1806-TMP* B1806-TMP* B1806-TMP* B1806-TMP* ----- ----- -----
TEMPLATE, SIDE PANEL HOLES M38 C1806-TMP* C1806-TMP* C1806-TMP* C1806-TMP* C1806-TMP* C1806-TMP* C1806-TMP* C1806-TMP* C1806-TMP*
WHEELHOUSE, REAR LEFT B1807-L B1807-L 2A1807-L 3A1807-L 3A1807-L 3A1807-L 5E1807-L 5E1807-L 5E1807-L
WHEELHOUSE, REAR RIGHT B1807-R B1807-R 2A1807-R 3A1807-R 3A1807-R 3A1807-R 5E1807-R 5E1807-R 5E1807-R
PANEL, BODY REAR W/ BRACES B1808 B1808 ----- ----- ----- ----- ----- ----- -----
PANEL BODY, REAR SCRIPT MARKED B1808-W G1808-F ----- ----- ----- ----- ----- ----- -----
PANEL BODY, REAR SCRIPT MARKED (US MADE) ----- G1808-F-US ----- ----- ----- ----- ----- ----- -----
SMALL PANEL, TAILLITE DRIVER SIDE ----- ----- 2A1808-L 2A1808-L 2A1808-L 2A1808-L 2A1808-L 2A1808-L -----
SMALL PANEL, TAILLITE PASS SIDE ----- ----- 2A1808-R 2A1808-R 2A1808-R 2A1808-R 2A1808-R 2A1808-R -----
BRACKET, REAR BODY PANEL TO FRAME B1808-BKT B1808-BKT B1808-BKT B1808-BKT B1808-BKT B1808-BKT B1808-BKT B1808-BKT B1808-BKT
TAIL GATE WITHOUT WILLYS STAMP ----- ----- 2A1809 2A1809 C1809 2A1809 2A1809 2A1809 -----
TAIL GATE WITH WILLYS STAMP ----- ----- 2A1809-W 2A1809-W ----- 2A1809-W 2A1809-W 2A1809-W -----
TAIL GATE CHAINS & HOOKS (PAIR) ----- ----- 2A1809-CHNS 2A1809-CHNS ---- 2A1809-CHNS 2A1809-CHNS 2A1809-CHNS -----
WELL, GAS TANK STD. ROUND STYLE B1810 B1810 ----- ----- ----- ----- ----- ----- D1810
WELL, GAS TANK EARLY SQUARE STYLE B1810-E B1810-E ----- ----- ----- ----- ----- ----- -----
CAP, GAS TANK WELL END (2 RPV) B1810-CAP B1810-CAP ----- ----- ----- ----- ----- ----- B1810-CAP
FRAME, SEAT DRVR FOR STD GAS TANK B1811~ B1811~ 2A1811~ 3A1811~ C1811-N~ 3A1811~ ----- ----- D1811-N~
FRAME ,SEAT DRVR FOR B0301-EH TANK B1811-E~ B1811-E~ ----- ----- ----- ----- ----- ----- -----
FRAME, SEAT PASSENGER B1812~ B1812~ 2A1812~ 3A1812~ 3A1812~ 3A1812~ ----- ----- 3A1812~
PAN ONLY FOR SEAT FRAME B1811 B1811-LPAN B1811-LPAN ----- ----- ----- ----- ----- ----- -----
PAN ONLY FOR SEAT FRAME B1811-E B1811-EPAN B1811-EPAN ----- ----- ----- ----- ----- ----- -----
FRAME, SEAT REAR B1813~ B1813~ 2A1813~ 3A1813~ C1813~ 3B1813~ 3B1813~ 3B1813~ C1813~
HANDLE, GRAB CORNER BODY B1814 B1814 ----- ----- ----- ----- ----- ----- -----
HANDLE, GRAB SIDE B1815 B1815 ----- ----- C1815 ----- ----- ----- -----
BRACKET, AX HEAD B1816 B1816 ----- ----- B1816 ----- ----- ----- -----
METAL SHEATH, AX HEAD BODY SIDE B1816-S B1816-S ----- ----- B1816-S ----- ----- ----- -----
BRACKET, AX HANDLE B1817 B1817 ----- B1816 ----- B1817 -----
B1817 ----- B1818
----- -----
BRACKET, SHOVEL HEAD B1818 B1818 ----- ----- B1818 ----- ----- ----- D1818
RING, RETAINER TRANS. SHIFT BOOT B0717 B0717 2A0717 2A0717 ----- 2A0717 2A0717 2A0717 -----
RING, RETAINER T/C SHIFT BOOT B0817 B0817 2A0817 2A0817 2A0817 2A0817 2A0817 2A0817 2A0817
RING, RETAINER SWITCH DIMMER B0617-R B0617-R B0617-R B0617-R ----- B0617-R B0617-R B0617-R -----
RETAINER, RING STG COLUMN WASHER B1424 B1424 B1424 B1424 C1424 B1424 ---- ---- ----
WASHER,STEERING COL /FLOOR RUBBER B1416-R B1416-R B1416-R B1416-R B1416-R B1416-R 5E1416 5E1416 5E1416
WASHER, STEERING COL TO FLOOR LEATHER B1416-L B1416-L ---- ---- ---- ---- ---- ---- ----
DOOR ONLY, GLOVE BOX B1819 B1819 ----- ----- C1819 ----- 5E1819 5E1819 D1819
GLOVE BOX WITHOUT DOOR B1819-GBS B1819-GBS ----- ----- ----- ----- 5E1819-GBC 5E1819-GBC -----
GLOVE BOX W/O DOOR, PLASTIC REPLACEMENT ----- ----- ----- ----- ----- ----- 5E1819-GBP 5E1819-GBP -----
LOCK, GLOVE BOX PUSH BUTTON (KEYLESS) B1820 B1820 ----- ----- B1820 -----
C1823 5E1820 5E1820 B1820
STRIKER, GLOVE BOX DOOR LATCH B1820-S B1820-S ----- 2A1823
----- ----- ----- ----- ----- -----
DOOR, TOOL BOX B1821 B1821 2A1821 2A1821 C1821 2A1821 2A1821 2A1821 C1821
DOOR, TOOL BOX FORD PATTERN TOP ---- G1821 ---- ---- ---- ---- ---- ---- ----
LOCK, TOOL BOX WITH H700 KEYS B1822-K B1822-K ---- ---- ---- ---- ---- ---- ----
DISK, TIRE COVER LATE B1825-D B1825-D ---- ---- ---- ---- ---- ---- ----
FOOT, TIRE SUPPORT LATE B1825-F B1825-F ---- ---- ---- ---- ---- ---- ----
BRACKET, TIRE SPARE EARLY 3 BOLT B1823-E B1823-E ---- ---- ---- ---- ---- ---- ----
BRACKET, TIRE SPARE LATE 2 BOLT B1823-L B1823-L 2A1823 2A1823 C1823 2A1823 2A1823 2A1823 C1823
^ B1806-TMP IS A REAR QUARTER PANEL TEMPLATE FOR FLAT FENDER JEEPS WHICH LOCATES THE ORIGINAL MOUNTING HOLES FOR MB
OR GPW BOW SETS, HANDLES, REFLECTORS, & OTHER QUARTER PANEL MOUNTED ITEMS. C1806-TMP IS THE SAME TYPE OF TEMPLATE
EXCEPT IT WOULD LOCATE M38 BOWS & BRACKETS. ~SEE PAGES 46 & 47 FOR SEAT FRAME DETAILS! **EARLY 1945 PRODUCTION CJ2A'S
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 37
GROUP 18: BODY
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
FASTENER, DOORWAY BODY SOCKET B1824+ B1824+ B1824++ ---- ---- ---- ---- ---- D1824+++
TOOL, SETTING FOR B1824 BDY SOCKET B1824-TOOL B1824-TOOL B1824-TOOL ---- ---- ---- ---- ---- ----
KNOB, FOOT REST NEAR GAS PEDAL B1827 B1827 B1827 B1827 B1827 B1827 B1827 B1827 B1827
REFLECTOR, ROUND BASE RED WWII B1828-R G1828-R B1828-R B1828-R ---- B1828-R B1828-R B1828-R ----
REFLECTOR, RND BASE ORANGE WWII B1828-O B1828-O ---- ---- ---- ---- ---- ---- ----
REFLECTOR, OVAL BASE RED M-SERIES B1829-R B1829-R B1829-R B1829-R B1829-R B1829-R B1829-R B1829-R B1829-R
REFLECTOR ,OVAL BASE ORANGE M-SRS B1829-O B1829-O B1829-O B1829-O B1829-O B1829-O B1829-O B1829-O B1829-O
MIRROR ONLY, REAR VIEW B1830 B1830 B1830 B1830 B1830 B1830 B1830 B1830 B1830
ARM ONLY, REAR VIEW MIRROR B1831 B1831 2A1831 2A1831 2A1831 2A1831 2A1831 2A1831 2A1831
BRACKET & SWIVEL ONLY,MIRROR ARM B1832 B1832 2A1832 2A1832 2A1832 2A1832 5E1832 5E1832 2A1832
MIRROR KIT (HAS MIRROR,ARM, & BKT) B1830-KIT B1830-KIT 2A1830-KIT 2A1830-KIT 2A1830-KIT 2A1830-KIT 5E1830-KIT 5E1830-KIT 2A1830-KIT
MIRROR, REARVIEW ON WINDSHIELD B1842 B1842 B1842 B1842 B1842 B1842 B1842 B1842 B1842
HINGE, CAST PASS SEAT PIVOT LEFT ---- ---- 2A1834-L 2A1834-L 2A1834-L 2A1834-L 5E1834 5E1834 5E1834
HINGE, CAST PASS SEAT PIVOT RIGHT ---- ---- 2A1834-R 2A1834-R 2A1834-R 2A1834-R 5E1834 5E1834 5E1834
BRACKET & BOLT, SAFETY STRAP REAR B1835 B1835 ---- ---- ---- ---- ---- ---- ----
EYEBOLT, SAFETY STRAP DASH B1835-EB B1835-EB ---- ---- ---- ---- ---- ---- ----
BRACKET, REAR SEAT REST FORWARD B1836-F G1836-F ---- ---- B1836-F ---- ---- ---- B1836-F
BRACKET, REAR SEAT REST REARWARD B1836-R G1836-R ---- ---- C1836-R ---- ---- ---- C1836-R
HOOK, ’J’ REAR SEAT RETAINER B1826 B1826 ---- ---- C1826 ---- ---- ----
B1866 D1826
CATCH, SPRING REAR SEAT B1833 B1833 ---- ---- B1833 ---- ---- ---- B1833
PLATE, COVER BODY MASTER CYLINDER B1837 B1837 B1837 B1837 C1837 B1837 C1837 C1837 C1837
COVER, BATTERY BOX ON BODY COWL ---- ---- ---- ---- C1838 ---- ---- ---- D1838-L
COVER, BATTERY BOX ON BDY COWL EARLY --- ---- ---- ---- ---- ---- ---- ---- D1838-E
HINGE, CAST TAILGATE ---- ---- C1710 C1710 C1710 C1710 C1710 C1710 C1710
GROMMET KIT, ENGINE & BODY RUBBER B1843 B1843 B1843 B1843 C1843 B1843 D1843 D1843 D1843
GROMMET KIT, ENGINE & BODY FELT --- G1843 ---- ---- ---- ---- ---- ---- ----
GROMMET KIT, BODY 1/4 TON TRAILER BT1843 BT1843 BT1843 BT1843 BT1843 BT1843 BT1843 BT1843 BT1843
PAD KIT, FIREWALL B1848 B1848 ---- ---- ---- ---- ---- ---- ----
GASKET KIT, GLOVE/TOOL BOX RUBBER B1849-R B1849-R ---- ---- ---- ---- ---- ---- ----
GASKET KIT, GLOVE/TOOL BOX CORK B1849-C B1849-C ---- ---- ---- ---- ---- ---- ----
GASKET KIT, TOOL BOX ONLY RUBBER ---- ---- 2A1850 C1850 C1850 C1850 C1850 C1850 C1850
GASKET KIT, GLOVE/VENT/BATTERY BOX ---- ---- ---- ---- C1849 ---- ---- ---- D1849
LOOP, FOOTMAN EARLY SLAT GRILL B1851-E** ---- ---- ---- ---- ---- ---- ---- ----
LOOP, FOOTMAN STD PRODUCTION B1851-L** B1851-L** 2A1851* 2A1851* C1851* 2A1851* 2A1851* 2A1851* C1851*
REST, FOOT REAR FLOOR PAN B1853 G1853 ---- ---- ---- ---- ---- ---- ----
HOLDER, JERRY FOR (B0332) 5-GAL CAN B1855 B1855 B1855 B1855 B1855 B1855 B1855 B1855 B1855
BRACKET, JERRY CAN STRAP B1856 B1856 ---- ---- ---- ---- ---- ---- ----
CHAIN & WIRES, THUMBSCREWS B1857@ G1857@ ---- ---- C1857 ---- ---- ---- C1857
BOWS ASSEMBLY,TOP (1 RPV) B1858 B1858 2A1858 2A1858 C1858 2A1858 5E1858 5E1858 C1858
BOW, FORWARD ONLY FOR HALF TOP ---- ---- 2A1858-F 2A1858-F ---- 2A1858-F 5E1858-F 5E1858-F ----
BOW, REAR TOP ONLY ---- ---- 2A1858-R 2A1858-R ---- 2A1858-R 5E1858-R 5E1858-R ----
BRACKET SET, BOW STOWAGE BODY SIDE ---- ---- 2A1858-STOW---- ---- ---- ---- ---- ----
BRACKET,TOP BOW FRONT FENDER (PR) ---- ---- 2A1859-1PR 2A1859-1PR ---- 2A1859-1PR ---- ---- ----
BRACKET,TOP BOW REAR (PR) ---- ---- 2A1859-2PR 2A1859-2PR ---- 2A1859-2PR 2A1859-2PR 2A1859-2PR ----
BRACKET SET, TOP BOW NO MARKS B1859@@ B1859@@ 2A1859 2A1859 C1859@@ 2A1859 ---- ---- D1859@@
BRACKET SET, TOP BOW FORD MARKED ---- G1859# ---- ---- ---- ---- ---- ---- ----
BRACKET SET, TOP BOW WILLYS MK'D B1859-W# ---- ---- ---- ---- ---- ----
2A1851 ---- ----
THUMBSCREW,MAIN BOW BRACKET 3/8" B1859-4~~ B1859-4~~ ---- ---- C1859-4~~ ---- C1851
---- ---- C1859-4~~
THUMBSCREW,MAIN BOW BKT 5/16" DIA. B1859-4-5/16 B1859-4-5/16 ---- ---- ---- ---- ---- ---- ----
COVER, SHOCK TOWER DRIVER SIDE B1861-L B1861-L ---- ---- ---- ---- ---- ----
Footman Loop ----
COVER, SHOCK TOWER PASS SIDE B1861-R B1861-R ---- ---- ---- ---- ---- ---- ----
TOOL BOX ASS'Y WITH LID ---- ---- 2A1863 C1863 C1863 C1863 C1863 C1863 C1863
COVER, BODY TRANS ACCESS UPPER ---- ---- ---- ---- C1865-U ---- ---- ---- D1865-U
COVER, BODY TRANS ACCESS LOWER ---- ---- ---- ---- C1865-L ---- ---- ---- C1865-L
STEP-UP'S, FOOT SIDE BODY ASSIST B1866++ B1866++ B1866++ B1866++ B1866++ B1866++ B1866++ B1866++ B1866++
* HOLE CENTERS: P/N 2A1851 (2-1/4");C1851 (2-1/8"); ALL JEEPS NOTED WITH (*) USED BOTH 2A1851 & C1851. += 14 RPV ++= 4 RPV +++= 8 RPV
** B1851-L ARE REPRODUCTIONS OF THE WWII CAST FOOTMAN LOOPS WITH 2-1/8" HOLE SPACINGS. AN ECONOMICAL REPLACEMENT IS C1851.
~~ B1859-4 CAST THUMBSCREW IS A FINE THREAD INCLUDED IN KIT B1859. C1859-4 IS A COARSE THREAD INCLUDED IN KIT C1859 OR D1859.
++ THESE ARE ORIGINAL STYLE STEP BRACKETS THAT HANG DOWN & BOLT TO THE BODY & FRAME & ASSIST WITH ENTRY INTO THE VEHICLE.
ORIGINALLY USED ONLY ON CJ JEEPS. WILL FIT ANY JEEP. #B1859-W & G1859 KITS INCLUDE B1857 & B1859-4-5/16 PARTS.
@ B1857 IS INCLUDED IN B1859-W WILLYS MARKED BOW & BRACKET KIT. G1857 IS INCLUDED IN G1859 FORD MARKED BOW & BRACKET KIT.
@@ ALSO ORDER B1857 KIT FOR B1859. ALSO ORDER C1857 KIT FOR C1859 OR D1859.
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 38
GROUP 20: WINDSHIELD
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
W/S COMPLETE NO "WILLYS" STAMP; NO GLASS B2001 B2001 2A2001 3A2001 C2001 3B2001 5E2001 5E2001** D2001
W/S COMPLETE WITH "WILLYS" STAMP; NO GLASS ---- ---- 2A2001-W ---- ---- ---- ---- ---- ----
W/S FRAMES ONLY NO "WILLYS" STAMP; NO GLASS B2001-IO B2001-IO 2A2001-IO ---- ---- ---- ---- ---- ----
W/S FRAMES ONLY WITH "WILLYS" STAMP; NO GLASS ---- ---- 2A2001-IOW ---- ---- ---- ---- ---- ----
W/S ASS'Y, INNER; NO GLASS B2002 B2002 2A2002 ---- ---- ---- ---- ---- ----
W/S, OUTER; NO "WILLYS" STAMPING; NO GLASS B2003 B2003 2A2003 3A2003 C2003 3B2003 5E2003** 5E2003** D2003
W/S, OUTER; WITH "WILLYS" STAMPING; NO GLASS ---- ---- 2A2003-W ---- ---- ---- ---- ---- ----
LOOP, WINDSHIELD CATCH TIE DOWN B2022 B2022 ---- ---- ---- ---- ---- ---- ----
RACK, RIFLE METAL CARBINE/GARAND B2226 B2226 ---- ---- B2226 ---- ---- ---- B2226
'u' SHAPED REST KIT (PR) BUFFERS W/S TO HOOD ---- ---- ---- ---- ---- ---- 5E2003-HRKIT 5E2003-HRKIT 5E2003-HRKIT
WELT KIT, HOOD BUMPER (REST) ---- ---- ---- ---- ---- ---- 5E2038 5E2038 5E2038
HINGE ON OUTER W/S FOR INNER FRAME SWING OUT B2003-WSTRK B2003-WSTRK B2003-WSTRK ---- ---- ---- ---- ---- ----
HANDLE, INNER W/S CAM LEVER CLOSE B2002-HDL B2002-HDL 2A2002-HDL ---- ---- ---- ---- ---- ----
VENT DOOR ON OUTER W/S FRAME WITH CLOSURE ---- ---- ---- 3A2021 C2021 ---- ---- ---- ----
HANDLE KIT FOR OUTER W/S FRAME VENT DOOR ---- ---- ---- 3A2021-HDLKIT ---- ----
SINGLE: ----
B2018-ABH ---- ----
PANEL, REPAIR W/S LOWER OUTER W/WILLYS STAMP ---- ---- 2A2003-PANELW --- ---- ---- ---- ---- ----
PANEL, W/S LOWER OUTER W/O STAMP B2003-PANEL B2003-PANEL 2A2003-PANEL ---- ---- IN TANDEM:
---- ----B2018 ---- ----
DECALS, DATE MARKING GLASS FORD ---- G2007-KIT ---- ---- ---- ---- ---- ---- ----
TAPE KIT, GLASS SETTING B2008 B2008 B2008 ---- ---- ---- ---- ---- ----
CLAMPS & CATCHES, W/S TO BODY B2009-KIT B2009-KIT B2009-KIT B2009-KIT B2009-KIT B2009-KIT ---- ---- ----
CLAMP, WINDSHIELD TO BODY ---- ---- ---- ---- ---- ---- 5E2009 5E2009 5E2009
CATCH, WINDSHIELD (on cowl) B2010 B2010 B2010 B2010 B2010 B2010 B2010 B2010 B2010
THUMBSCREW, WINDSHIELD PIVOT B2011 B2011 2A2011 2A2011 2A2011 2A2011 ---- ---- ----
BRACKET, WINDSHIELD MOUNT LEFT B2012 B2012 B2012 B2012 C2012-L 3B2012-L 5E2012-L 5E2012-L 5E2012-L
BRACKET ,WINDSHIELD MOUNT RIGHT B2012 B2012 B2012 B2012 C2012-R 3B2012-R 5E2012-R 5E2012-R 5E2012-R
KNOB ONLY (OR T-SCREW), SLIDE ARM B2013-K B2013-K 2A2013* ---- ---- ---- ---- ---- ----
ARM, INNER WINDSHIELD SLIDE B2014 B2014 ---- ---- ---- ---- ---- ---- ----
ARM ASSEMBLY FOR INNER W/S SWINGOUT ---- ---- 2A2014-KIT* --- ---- ---- ---- ---- ----
BLADE ONLY, WIPER VACUUM B2015-V B2015-V B2015-V B2015-V B2015-V B2015-V B2015-V B2015-V B2015-V
BLADE ONLY, HAND WIPER B2015-H B2015-H B2015-H B2015-H ---- B2015-H B2015-H B2015-H ----
ARM ONLY, WIPER VACUUM B2016-V B2016-V B2016-V B2016-V B2016-V B2016-V B2016-V B2016-V B2016-V
ARM ONLY, HAND WIPER B2016-H B2016-H B2016-H B2016-H ---- B2016-H B2016-H B2016-H ----
TANDEM WIPER ARM BLADES&HANDLES B2018~ B2018~ ---- ---- ---- ---- ---- ---- ----
SINGLE WIPER ARM BLADE & HANDLE B2018-ABH~ B2018-ABH~ B2018-ABH~ B2018-ABH~ ---- B2018-ABH~ B2018-ABH~ B2018-ABH~ ----
MOTOR, VACUUMWIPER W/ ONOFF SW B2019-R B2019-R B2019-R B2019-R B2019-R B2019-R B2019-R B2019-R B2019-R
MOTOR,VACUUMWIPER W/O ONOFF SW B2019-N B2019-N B2019-N B2019-N B2019-N B2019-N B2019-N B2019-N B2019-N
VACCUM WIPER MOTOR STEEL FEED LINE; DRIVER'S B2019-WT B2019-WT B2019-WT B2019-WT B2019-WT ---- ---- ---- ----
VACCUM WIPER MOTOR FEED LINE KIT FOR B2019-N B2019-WTK B2019-WTK B2019-WTK B2019-WTK B2019-WTK ---- ---- ---- ----
MOTOR, WIPER W/ ARM & BLADE -6V B2020-6 B2020-6 B2020-6 B2020-6 B2020-6 B2020-6 B2020-6 B2020-6 B2020-6
MOTOR, WIPER W/ ARM & BLADE -12V B2020-12 B2020-12 B2020-12 B2020-12 B2020-12 B2020-12 B2020-12 B2020-12 B2020-12
MOTOR, WIPER W/ ARM & BLADE -24V ---- ---- ---- ---- C2020-24 ---- ---- ---- C2020-24
WIPER ARM & BLADE KIT, ELEC MOTORS B2020-AB B2020-AB B2020-AB B2020-AB B2020-AB B2020-AB B2020-AB B2020-AB B2020-AB
TUBING, VACUUM W/S WIPER (PER FT.) B2023 B2023 B2023 B2023 B2023 B2023 B2023 B2023 B2023
HOSE, VACUUM W/S WIPER (PER FT.) B2024 B2024 B2024 B2024 B2024 B2024 B2024 B2024 B2024
STUD,WINDSHIELD EARLY PUSHBUTTON B2025-B B2025-B ---- ---- ---- ---- ---- ---- ----
STUD, WINDSHIELD STANDARD (1 PC) B2025-A B2025-A 2A2025 ---- ---- ---- ---- ---- ----
STUD, WINDSHIELD REPLACEMENT ---- ---- 2A2025-R ---- ---- ---- ---- ---- ----
GASKET, INNER WINDSHIELD CANVAS B2042-C B2042-C ---- ---- ---- ---- ---- ---- ----
GASKET, INNER WINDSHIELD RUBBER B2042-R B2042-R B2042-R 3A2042 3A2042 3A2042 3A2042 3A2042 D2042
GASKET, LOWER WINDSHIELD TO COWL B2086 B2086 B2086 3A2086 3A2086 3A2086 5E2086 5E2086 5E2086
SCREW,LOWER W/S GASKET ATTACHM'T B2086-S B2086-S B2086-S B2086-S B2086-S B2086-S B2086-S B2086-S B2086-S
*EARLY 1945 CJ2A USED MB SLIDE ARM ARRANGEMENT ON INNER W/S PARTS B2013,B2014 **AFTER 1975 USE 5L2003 & 5L2001.
~EARLY MB & GPW USED (2) HAND WIPER ASS'Y TIED TOGETHER WITH A TANDEM CROSSBAR (B2018) SO EITHER OCCUPANT COULD
OPERATE THE WIPERS. LATER MB, GPW & CIVILIAN JEEPS USED VACUUM WIPER UNITS ON ONE OR BOTH SIDES OF THE WINDSHIELD,
(ALSO SEE B2019-N, B2016-V, B2015-V & B2018-ABH).
B2016-H
B2018 B2022
B2018-ABH B2002
B2042-R, B2042-C B1736, B1737 B1736, B1737
B2015-H B2003 B2025-A
B2018 B2011
2A2011
B2018- B2013-K
B2017-H B2014
B2018 B2009-KIT
B2018-ABH
B2086, B2086-S
2A2025 B2025-B
G2007-KIT 2A2025-R
MB GPW WINDSHIELD
B2001-IO B2001 B2002 B2003
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 39
GROUP 21: HITCHES, BUMPERS, BUMPERETTES
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
HOOK, PINTLE CAST B2101-E B2101-E B2101-E B2101-E C2101 B2101-E B2101-E B2101-E C2101
EYEBOLT, PINTLE HOOK (2 RPV) B2101-EB B2101-EB B2101E-B B2101-EB B2101-EB B2101-EB B2101-EB B2101-EB B2101-EB
HOOK, PINTLE COMBO 1-7/8" BALL B2102-1~~ B2102-1~~ B2102-1~~ B2102-1~~ B2102-1~~ B2102-1~~ B2102-1~~ B2102-1~~ B2102-1~~
HOOK, PINTLE COMBO 2" BALL B2102-2~~ B2102-2~~ B2102-2~~ B2102-2~~ B2102-2~~ B2102-2~~ B2102-2~~ B2102-2~~ B2102-2~~
BAR,TOW TANDEM MILITARY(LUNNETTE) B2103 B2103 B2103 B2103^ B2103^ B2103^ B2103^ B2103^ B2103^
BLOCK, TANDEM TOW BAR TO GRILL B2112 B2112 B2112 B2112^ B2112^ B2112^ B2112^ B2112^ B2112^
STRAP, TANDEM TOW BAR TIEDOWN B1924 B1924 B1924 B1924^ B1924^ B1924^ B1924^ B1924^ B1924^
BAR, REAR DRAW HITCH TAKEOUT B2104-T~ B2104-T~ B2104-T B2104-T B2104-T~ B2104-T B2104-T B2104-T B2104-T~
BRACKET, LICENSE PLATE FRT OR REAR B2113 B2113 B2113 B2113 B2113 B2113 B2113 B2113 B2113
BRACKET, LICENSE PLATE REAR W/LITE B2114 B2114 B2114 B2114 B2114 B2114 B2114 B2114 B2114
PLATE, RED METAL GENERAL 1-STAR B2106-1 B2106-1 B2106-1 B2106-1 B2106-1 B2106-1 B2106-1 B2106-1 B2106-1
PLATE, RED METAL GENERAL 2-STAR B2106-2 B2106-2 B2106-2 B2106-2 B2106-2 B2106-2 B2106-2 B2106-2 B2106-2
PLATE, RED METAL GENERAL 3-STAR B2106-3 B2106-3 B2106-3 B2106-3 B2106-3 B2106-3 B2106-3 B2106-3 B2106-3
PLATE, RED METAL GENERAL 4-STAR B2106-4 B2106-4 B2106-4 B2106-4 B2106-4 B2106-4 B2106-4 B2106-4 B2106-4
PLATE, RED METAL GENERAL 5-STAR B2106-5 B2106-5 B2106-5 B2106-5 B2106-5 B2106-5 B2106-5 B2106-5 B2106-5
PLATE COVER, RED MATERIAL GENERAL 1-STAR B2368-1 B2268-1 B2368-1 B2368-1 B2368-1 B2368-1 B2268-1 B2368-1 B2268-1
PLATE COVER, RED MATERIAL GENERAL 2-STAR B2368-2 B2268-2 B2368-2 B2368-2 B2368-2 B2368-2 B2268-2 B2368-2 B2268-2
PLATE COVER, RED MATERIAL GENERAL 3-STAR B2368-3 B2268-3 B2368-3 B2368-3 B2368-3 B2368-3 B2268-3 B2368-3 B2268-3
PLATE COVER, RED MATERIAL GENERAL 4-STAR B2368-4 B2268-4 B2368-4 B2368-4 B2368-4 B2368-4 B2268-4 B2368-4 B2268-4
PLATE COVER, RED MATERIAL GENERAL 5-STAR B2368-5 B2268-5 B2368-5 B2368-5 B2368-5 B2368-5 B2268-5 B2368-5 B2268-5
GUSSET SET, FRONT BUMPER; 4 PC KIT B2107* B2107* B2107* ---- ---- ---- ---- ---- ----
GUSSET, BUMPER DRIVER UPPER B2107-DU* B2107-DU* B2107-DU* ---- ---- ---- ---- ---- ----
GUSSET, BUMPER DRIVER LOWER B2107-DL* B2107-DL* B2107-DL* ---- ---- ---- ---- ---- ----
GUSSET, BUMPER PASSENGER UPPER B2107-PU* B2107-PU* B2107-PU* ---- ---- ---- ---- ---- ----
GUSSET, BUMPER PASSENGER LOWER B2107-PL* B2107-PL* B2107-PL* ---- ---- ---- ---- ---- ----
RIVET KIT, FRONT BUMPER GUSSETS B2107-R* B2107-R* B2107-R* ---- ---- ---- ---- ---- ----
BUMPERETTE, REAR B2108 B2108 B2108 B2108 B2108 B2108 B2108 B2108 B2108
REENFORCEMENT, FRT BUMPER WOOD B2110 B2110 B2110* C2110 C2110 C2110 C2110 C2110 C2110
BUMPER, FRONT B2111 B2111 B2111* 3A2111 3A2111 3A2111 3A2111 3A2111 3A2111
PLATE, BRIDGE JEEP WEIGHT CLASS "2" (YELLOW) B2115 B2115 ---- ---- B2115 ---- ---- ---- B2115
PLATE, BRIDGE TRUCK WEIGHT CLASS "3" (YELLOW) FOR ALL MID-SIZE TRUCKS......................................................................................................................B2115-3
PLATE, BRIDGE TRUCK WEIGHT CLASS "4" (YELLOW) FOR ALL LARGE SIZE TRUCKS..................................................................................................................B2115-4
PLATE, BRIDGE CHANGEABLE NUMBERS(OLIVE DRAB) FOR ALL SIZE TRUCKS & JEEPS (POST-WAR M-SERIES)............................................................................C2115-SD
^ B2103 WAS ORIGINALLY DESIGNED FOR MB & GPW. IT BOLTS DIRECTLY TO CJ2A FRAMES UP TO S/N 215649. IT REQUIRES MODIFICATIONS TO FIT ALL OTHER
JEEPS. B2103 SECURES TO THE TO GRILL WITH B2112 & B1924.
~ B2104 WAS ORIGINALLY DESIGNED FOR CJ JEEPS BUT WILL FIT ANY MILITARY JEEP. GOOD FOR BALL HITCH TOWING.
~~ THESE PINTLE HOOKS HAVE A LOWER JAW WITH A BALL HITCH. FITS ANY JEEP. GOOD FOR TOWING EITHER MILITARY OR CIVILIAN TRAILERS.
* CJ2A UP TO S/N 215649, USED B2110, B2111, B2107, & B2107-R. AFTER S/N 215649 CJ2A USED 3A2111.
B2107-DU, -DL, -PU, -PL ARE ALL PART OF KIT B2107. B2107
B1508 B2107-DU
G1508 B1510 B2107-DL
B1509
B0661
G0661
B0131-MK
B0811
B2107
MB/GPW FRAME B2107-PU
B2107-PL B2111
B2101-E
C2101
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 40
GROUP 22:RADIO, ORDNANCE, & TOOLS
**ALL REPLICA ORDNANCE & GUNS LISTED HERE ARE NON-OPERATING NON-FIRING REPLICAS STRICTLY INTENDED FOR HISTORICAL
ENHANCEMENT OF RESTORED ANTIQUE VEHICLES! IT IS YOUR RESPONSIBILITY TO DETERMINE THE LAWS GOVERNING THE PURCHASE
OF THESE REPLICAS WITH REGARDS TO YOUR LOCAL AND STATE LAWS!
WE WILL NOT KNOWINGLY SELL ANY ABOVE LISTED ITEMS IF THEY DO NOT IN ANY WAY CONFORM TO EXISTING LAWS!!!
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
BRACKET, MP50 ANTENNAE MOUNT B2201 B2201 ---- ---- B2201 ---- ---- ---- B2201
BRACKET,MOUNT REAR BODY FOR MP50 B2202 B2202 ---- ---- B2202 ---- ---- ---- B2202
BASE, MP48 ANTENNAE (HEAVY) B2203 B2203 ---- ---- B2203 ---- ---- ---- B2203
ANTENNAE,5-MAST SECTIONS for MP48 B2204 B2204 ---- ---- B2204 ---- ---- ---- B2204
BASE, AB-15 ANTENNAE (LIGHT) B2205 B2205 ---- ---- B2205 ---- ---- ---- B2205
ANTENNAE,3-MAST SECTIONS for AB15 B2207 B2207 ---- ---- B2207 ---- ---- ---- B2207
STRAP KIT, RADIO SUPPRESSION B0656 B0656 ---- ---- ---- ---- ---- ---- ----
RADIO SUPPRESSION GROUND STRAPS FOR HINGE B0656-5038 B0656-5038 ---- ---- ---- ---- ---- ---- ----
RADIO SUPPRESSION GROUND STRAP FOR ENGINE B0656-1098 B0656-1098 ---- ---- ---- ---- ---- ---- ----
BRACKET, FIRST AID KIT B2210 B2210 ---- ---- C2210 ---- ---- ---- ----
KIT, FIRST AID W/ ORIGINAL CONTENTS B2210-FAK B2210-FAK ---- ---- B2210-FAK ---- ---- ---- B2210-FAK
BOX ONLY, FIRST AID KIT;NO CONTENTS B2210-FABO B2210-FABO ---- ---- B2210-FABO ---- ---- ---- B2210-FABO
BRACKET, GREASE GUN (LATE HOOD) B2211 B2211 ---- ---- ---- ---- ---- ---- ----
GUN, GREASE (LATE HOOD MOUNT) B2211-G B2211-G ---- ---- ---- ---- ---- ---- ----
GUN, GREASE(HOOD) LINCOLN BRAND B2211-G-LIN B2211-G-LIN ---- ---- ---- ---- ---- ---- ----
HEATER KIT, REPLACEMENT 6V MIL.^ B2212-6R B2212-6R B2212-6R B2212-6R B2212-6R B2212-6R B2212-6R B2212-6R B2212-6R
HEATER KIT, REPLACEMENT 12V MIL.^ B2212-12R B2212-12R B2212-12R B2212-12R B2212-12R B2212-12R B2212-12R B2212-12R B2212-12R
HEATER KIT, REPLACEMENT 24V MIL.^ B2212-24R B2212-24R B2212-24R B2212-24R B2212-24R B2212-24R B2212-24R B2212-24R B2212-24R
SWITCH, LIGHTED HEATER CONTROL B0696 B0696 B0696 B0696 B0696 B0696 B0696 B0696 B0696
CRANK, HAND STARTER B2213 B2213 2A2213 2A2213 2A2213 2A2213 2A2213 2A2213 2A2213
JACK ONLY; ORDER HANDLE SEPARATELY B2214 B2214 2A2214 2A2214 2A2214 2A2214 2A2214 2A2214 2A2214
JACK HANDLE B2240-L B2240-L 2A2214-H 2A2214-H 2A2214-H 2A2214-H 2A2214-H 2A2214-H 2A2214-H
BAG, JACK & HANDLE CANVAS B2214-BAG B2214-BAG 2A2214-BAG 2A2214-BAG 2A2214-BAG 2A2214-BAG 2A2214-BAG 2A2214-BAG 2A2214-BAG
EXTINGUISHER, FIRE (BRASS PUMP) B2215 B2215 ---- ---- ---- ---- ---- ---- ----
BRACKET, FIRE EXTINGUISHER B2218 B2218 ---- ---- ---- ---- ---- ---- ----
MOUNT, M31 MACHINE GUN W/O LEGS B2216 B2216 ---- ---- B2216 ---- ---- ---- B2216
MOUNT, M31C MACHINE GUN W/ LEGS B2216-C B2216-C ---- ---- B2216-C ---- ---- ---- B2216-C
MOUNT, M25 MACHINE GUN W/O LEGS B2216-M25 B2216-M25 ---- ---- B2216-M25 ---- ---- ---- B2216-M25
OIL CAN, FIREWALL MOUNT B2219 B2219 ---- ---- ---- ---- ---- ---- ----
BRACKET, OIL CAN (FIREWALL MOUNT) B2220 B2220 ---- ---- ---- ---- ---- ---- ----
RACK, RIFLE METAL CARBINE/GARAND B2226 B2226 ---- ---- B2226 ---- ---- ---- B2226
RE-PAD & WELT KIT FOR (B2226) RACK B2226-PADS B2226-PADS ---- ---- B2226-PADS ---- ---- ---- B2226-PADS
COVER, RIFLE RACK & RIFLE B2329 B2329 ---- ---- B2329 ---- ---- ---- B2329
AX, NEW ORIGINAL MILITARY STYLE B2227 B2227 ---- ---- B2227 ---- ---- ---- B2227
SHOVEL, JEEP BODY NEW ORIG STYLE B2228 B2228 ---- ---- B2228 ---- ---- ---- B2228
PICK/MATTOCK, PIONEER RACK TOOL 2C2231 2C2231 ---- ---- 2C2231 ---- ---- ---- 2C2231
COVER, SHOVEL HEAD B23105 B23105 ---- ---- B23105 ---- ---- ---- B23105
REPAIR KIT, CANVAS W/AWL & NEEDLES B2230 B2230 B2230 B2230 B2230 B2230 B2230 B2230 B2230
WRENCH, NUT BEARING WHEEL B2234 B2234 B2234 B2234 B2234 B2234 B2234 B2234 B2234
TOOL KIT, ORIGINAL STYLE WITH BAG B2240 B2240 B2240 B2240 B2240 B2240 B2240 B2240 B2240
WRENCH, LUG B2240-L B2240-L 2A2240-L 2A2240-L 2A2240-L 2A2240-L 2A2240-L 2A2240-L 2A2240-L
PUMP, TIRE HAND MILITARY B2260 B2260 ---- ---- B2260 ---- ---- ---- B2260
GUN, MACHINE H20 COOLED 30 CAL** B2280-W B2280-W ---- ---- B2280-W ---- ---- ---- B2280-W
GUN, MACHINE AIR COOLED 30 CAL** B2280-A B2280-A ---- ---- B2280-A ---- ---- ---- B2280-A
ARM, TRAVELING LOCK B2217 B2217 ---- ---- B2217 ---- ---- ---- B2217
GUN, MACHINE HEAVY BARREL 50 CAL** B2290 B2290 ---- ---- B2290 ---- ---- ---- B2290
GUN, MACHINE AIR COOLED 50 CAL** B2290-A B2290-A ---- ---- B2290-A ---- ---- ---- B2290-A
CAN, AMMO 30 CAL STANDARD B2270-30 B2270-30 ---- ---- B2270-30 ---- ---- ---- B2270-30
CAN, AMMO 50 CAL STANDARD B2270-50 B2270-50 ---- ---- B2270-50 ---- ---- ---- B2270-50
CAN, AMMO 30 CAL DIRECT MOUNT B2270-30DM B2270-30DM ---- ---- B2270-30DM ---- ---- ---- B2270-30DM
ROUNDS, 30 CAL. (25 ROUNDS) B2271-25RDS B2271-25RDS B2271-25RDS ---- ---- ---- B2271-25RDS
ROUND, 50 CAL (SINGLE WITH LINK) B2272-1RD B2272-1RD B2272-1RD ---- ---- ---- B2272-1RD
CRADLE & TRAY, 30-50 CAL MACH.GUN B2285 B2285 ---- ---- B2285 ---- ---- ---- B2285
PINTLE(NO TRAY),30-50 CAL MACH.GUN B2285-M48 B2285-M48 ---- ---- B2285-M48 ---- ---- ---- B2285-M48
PISTOL, 45CAL REPLICA** B22100 B22100 ---- ---- B22100 ---- ---- ---- B22100
GUN, MACHINE THOMPSON STD. WAR** B22101 B22101 ---- ---- B22101 ---- ---- ---- B22101
SLING, LEATHER FOR TOMMY GUN B22101-SL B22101-SL B22101-SL B22101-SL
SLING, WEB FOR TOMMY GUN B22101-SW B22101-SW B22101-SW B22101-SW
RIFLE, M1 CARBINE REPLICA** B22102 B22102 ---- ---- B22102 ---- ---- ---- B22102
RIFLE, GARAND M1 REPLICA** B22103 B22103 ---- ---- B22103 ---- ---- ---- B22103
COVER, 30CAL MACHGUN W/AMMOCAN B2386-A B2386-A ---- ---- B2386-A ---- ---- ---- B2386-A
COVER, 30CAL W/DIRECT MOUNT AMMO CAN B2386-ADM B2386-ADM ---- ---- B2386-ADM ---- ---- ---- B2386-ADM
COVER, 30CAL MACHGUN W/O AMMOCAN B2386-NA B2386-NA ---- ---- B2386-NA ---- ---- ---- B2386-NA
COVER, 50CAL MACHGUN W/AMMOCAN B2387-A B2387-A ---- ---- B2387-A ---- ---- ---- B2387-A
COVER, 50CAL MACHGUN W/O AMMOCAN B2387-NA B2387-NA ---- ---- B2387-NA ---- ---- ---- B2387-NA
COVER, MUZZLE RIFLE B2363 B2363 ---- ---- B2363 ---- ---- ---- B2363
COVER, PEDESTAL OPENING M31/M31C B2364 B2364 --- ---- B2364 ---- ---- ---- B2364
SPOUT,JERRY CAN FILLER CAM STYLE B0329 B0329 B0329 B0329 B0329 B0329 B0329 B0329 B0329
SPOUT, JERRY CAN FILL SCREW STYLE B0329-R B0329-R B0329-R B0329-R B0329-R B0329-R B0329-R B0329-R B0329-R
COVER, JERRY CAN FILLER SPOUT B2362 B2362 B2362 B2362 B2362 B2362 B2362 B2362 B2362
PITCHER, WATER COLLAPSE RAD FILL B2398 B2398 B2398 B2398 B2398 B2398 B2398 B2398 B2398
BUCKET, CANVAS COLLAPSABLE WATER B2395 B2395 B2395 B2395 B2395 B2395 B2395 B2395 B2395
^ THIS IS A HIGH QUALITY GENERIC MILITARY HEATER USED ON MANY VEHICLES BUT NOT SPECIFICALLY JEEP. IT COMES WITH HOSES & CLAMPS
& REQUIRES YOU TO MAKE THE BRACKETS TO MOUNT IT. USE B0696 HEATER SWITCH TO CONTROL HEATER.
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 41
GROUP 23: WILLYS MB & FORD GPW SEAT CUSHION & COVER SETS
For the exacting restorer that must have every detail authentic inside and out, this set duplicates the
cushions issued for the majority of jeep production during WWII. Each cushion is double stitched as
per original military design. The horse hair inserts use our exclusive genuine production sheet packed
animal hair. Do not confuse this hair insert with low density post war rubberized hair commonly
used in other reproduction cushion sets. Seat backs are approximately 1" thick and bottom cushions
are 2-1/2" thick. These cushions look, feel, and work exactly as the originals did. The seat backs are
the early flap design. The front and rear bottom cushions are also available with the optional early
zippered map case/blanket compartments. ( Bottom cushion zippers were supplied from the factory B2301
up until approximately July 1942.) STANDARD WWII ISSUE
1942-1945 (Our Best Seller!)
LATE WWII SIMULATED SPRING STYLE CUSHION SET Non-zippered Cushions!
or have your See Page 54 for Crash
ORIGINAL SPRINGS RECOVERED Pads & Covers!
We also make a set of cushions that simulate the late 1945 spring set (B2301-45). Original springs are
hard to find and often impractical or uncomfortable to us. We have solved this problem by creating a
cushion set that is foam filled but is styled like the late 1945 spring cushion set. Comfort and
originality in one package! If you do have an original spring set, they can be re-stuffed with genuine
animal hair and recovered with the late spring style covers. You must supply the springs and original
border wires (all four; two front lowers, one rear upper and one rear lower), stripped, cleaned and
painted for the best restoration results. We may be able to supply missing border wire components
from time to time. We can also recover unoriginal M201 Hotchkiss jeep springs in an original U.S.
military look. The original style covers have such features as flapless front seat back covers and
double stitched seams as per original specifications. If you wish to recover your springs yourself, B2301-45
you must supply the (4) border wires so we can sew them into the covers, or we can offer just the LATE WWII ISSUE 1945
cover set without these wires. Simulated Spring Style Cushions!
Build your custom SEAT COVER or CUSHION SET (in an Array of Canvas Colors)
ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
1942-1945 STANDARD ISSUE CUSHION SET with "Flap" Attachement Upper Cushions & Non-zippered Seat Bottoms..............................................................B2301
1941-1942 EARLY ISSUE CUSHION SET with "Flap" Attachment Upper Cushions & Zippered Map Case Compartment Front & Rear Seat Bottoms..............B2301-Z
1945 LATE ISSUE CUSHION SET with "Non-Flap" Attachment Front Upper Cushions with Non-Zippered Simulated Upper & Lower Spring Appearance .....B2301-45
INDIVIDUAL CUSHIONS; STANDARD ISSUE 1942-1945 (All other style cushions individually available by special quote):
SEAT FRONT ......................DRIVER ................UPPER .................................Base Part Number ................B2301-1
SEAT FRONT ......................DRIVER ................LOWER ................................Base Part Number ................B2301-2
SEAT FRONT ......................PASSENGER ........UPPER .................................Base Part Number ................B2301-1
SEAT FRONT ......................PASSENGER ........LOWER ................................Base Part Number ................B2301-2
SEAT REAR ........................................................UPPER .................................Base Part Number ...............B2301-5
SEAT REAR .........................................................LOWER ................................Base Part Number ................B2301-6
INSTALLATION KIT (Screws & Washers) for a Complete Cushion Set (4 front & 2 rear cushions) .............. Order Number ......B2303
INSTALLATION KIT (Screws & Washers) for the Front Seat Cushions Only (4 cushions)............................ Order Number ......B2303-F
INSTALLATION KIT (Screws & Washers) for the Rear Seat Cushions Only (2 cushions) ............................. Order Number ......B2303-R
REAR FENDER WELL CUSHIONS LONG (PAIR); covers both wheelhouse tops & tool box lids) .......................... Base Part Number ................B2381
REAR FENDER WELL CUSHIONS SHORT (PAIR); covers both wheelhouse tops; tool box lids not covered) ............Base Part Number ................B2381-S
INSTALLATION KIT (Screws & Washers) KIT for a pair of B2381 FENDER WELL CUSHIONS ................................Order Number ......................B2381-IKIT
Our exclusive Installation Kits are made from blackened stainless steel and brass components so they will NOT stain your cushions or covers!
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 42
GROUP 23: WILLYS MB & FORD GPW TOPS & ENCLOSURES
EARLY ZIPPERED & LATE FRAME STYLE WINTER ENCLOSURE B2308-X B2309-X
The EARLY WINTER ZIPPERED ENCLOSURE duplicates the earlier original issue Winterization Field Kit WKT100
enclosure. It is the only original factory top issued for most of WWII. Access is through heavy duty zippered openings
on each side curtain. The original style trapezoidal shaped heavy weight. D.O.T. approved safety windows are sized for
metal border frame installation. NO body alteration, drilling, or additional rod or framework other than the top bows
is required to install this enclosure. This highly detailed and crafted enclosure uses a total of (247) pieces of military
black finished brass hardware and (63) separate canvas pattern pieces! In addition to the reinforcements described for B2310-E
our Deluxe Summer Top, other features include full reinforcements and flaps that accept side curtains, center bow re-
inforcements, rear paulin weather flaps, heavy weight D.O.T. approved rear safety window, gas can opening flap, front
windshield straps, and issue stenciling. Some key side curtain canvas hardware is supplied uninstalled to account for
minor variations in your jeep body and bows, allowing you to custom fit your jeep. Construction and material specifica-
tions for our LATE WINTER FRAME STYLE ENCLOSURE is identical to the early winter enclosure specifications
except the enclosure is designed for original WWII frame doors and curtains as introduced in late 1945. Some key side
curtain canvas hardware is supplied uninstalled to account for variations in your jeep body and bows. This is an ultimate
show winner that experts can’t tell from the original! Please supply door framework and rods cleaned and painted, or
purchase the rod and framework from us.
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 43
GROUP 23: M38 & M38A1 SEAT COVERS, CUSHIONS, TOPS, ENCLOSURES
Our SEAT COVER SETS duplicate the original covers used with M38 & M38A1’s spring assemblies and are available in
either our exclusive olive drab canvas or factory issue style olive drab vinyl. Each cover is double stitched as per original
military design. The front seat bottom covers include original type draw strings and are ready for you to install on your
springs! At last! Complete REPLACEMENT SEAT CUSHION SETS for missing or worn out jeep seat springs are
available! These sets use our exclusive heavy density “Pincore” foam inserts, use the original style covers, prevent any
bottoming on the seat pan, and are so firm you can’t tell the difference between springs and foam inserts! Sets available
with or without front pans; inserts available separately. (Do not confuse this foam with off the shelf, less dense, and less
expensive foam used in common upholstery applications. Our inserts ad life to your covers. Springs tend to wear the
covers out quicker.) The rear seat covers are modified to fully enclosed cushions for ease of installation. Only you will
know the secret! ORIGINAL SPRING REUPHOLSTERING with original style covers and paddings is also available.
(Please supply the springs and front seat bottom spring pans stripped, cleaned and painted for the best restoration results.
Upholstery projects are generally reserved for our slower seasons. Please schedule with us for upholstery work.)
Our TRAILRUN summer tops are the result of simplifying our original winter top patterns by eliminating non-essential
flaps, hardware, and reinforcements required for side curtains. The top cost is reduced yet it still uses our high quality
materials, construction standards and maintains overall original appearance. Features include (2) center bow flaps, double
stitched rear bow seam, reinforced lower rear panel, heavy weight D.O.T. approved safety window, mil-spec black hard-
ware, and issued stenciling. (TRAILRUN tops can not accept curtains and can not be converted later.) Our WINTER
ENCLOSURE exactly duplicates original issue. Features include full reinforcements and flaps to accept side curtains,
lower rear panel and rear bow (2) center bow flaps, and issue stenciling. We are approved and have produced these tops
for the US and Canadian governments. The door covers have original black turn fasteners around the canvas perimeter
so the cover can be removed for repair or to collapse and stow the door frame. Some key side curtain canvas hardware
supplied uninstalled to account for minor variations in your jeep body.
Build your custom SEAT COVER or CUSHION SET (in an Array of Canvas or Vinyl Colors)
ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
SEAT FRONT ......DRIVER ................UPPER .................................................Base Part Number ................2A2302-1
SEAT FRONT ......DRIVER ................LOWER ................................................Base Part Number ................3A2302-2
SEAT FRONT ......PASSENGER ........UPPER .................................................Base Part Number ................2A2302-1
SEAT FRONT ......PASSENGER ........LOWER ................................................Base Part Number ................3A2302-2
SEAT REAR ........................................UPPER .................................................Base Part Number ................C2302-5
SEAT REAR .........................................LOWER ................................................Base Part Number ................C2302-6
INSTALLATION KIT (Screws & Washers) for a Complete Cover/Cushion Set (4 front & 2 rear covers/cushions) ........ Order Number ......C2303
INSTALLATION KIT (Screws & Washers) for the Front Seat Upper Covers/Cushions Only (2 covers/cushions) .......... Order Number ......2A2303-F
INSTALLATION KIT (Screws & Washers) for the Rear Seat Covers/Cushions Only (2 covers/cushions) ..................... Order Number ......C2303-R
FASTENING SCREWS for the Front Seat Bottom Pans (4 required per pan; 8 required for 2 seats/pans ..................... Order Number ......B2306-S
REAR FENDER WELL CUSHIONS (PAIR); covers both wheelhouse tops ................................ ................................ On-line Base Part Number Search ..... ......C2381
INSTALLATION KIT (Screws & Washers) for pair of FENDER WELL CUSHIONS ...................................Order Number ....................................................B2381-IKIT
Build your custom TOP or ENCLOSURE (in an Array of Canvas or Vinyl Colors)
ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing
M38 M38A1
SUMMER TOP (will not accept side curtains/doors): .............................. Base Part Number .............C2308 ................................D230
WINTER TOP OR ENCLOSURE (will accept side curtains/doors) ..............Base Part Number .............C2320 ................................D2320
ROD KIT FOR TOP BOW SUPPORT (SET) ....................... Order Number....................C2319-RODKIT................D2319-RODKIT
DOOR FRAME KIT (PAIR) .................................................. Order Number....................C2319-DOORKIT.............5E2319-DOORKIT
TOP BOW SET ........................................................................ Order Number....................C1858 ................................C1858
INSTALLATION VIDEO TAPE (VHS) ................................ Order Number....................V-D2310 ............................V-D2310
Separate WINTER TOP, SIDE CURTAINS, OR DOORS are available through a special quote.
For original style top bows, brackets, castings, bow thumbscrews & thumbscrew chains..... See pages 51 & 56!
Straps and all other accessories are in the JEEP STRAPS & WELTS section. ON-LINE: Click on"WEB SPECIALS" Button for Red-Hot Sales!
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 44
GROUP 23: M151 & M718 SEAT COVERS, CUSHIONS, TOPS, ENCLOSURES
Our cushion sets duplicate the cushions that were originally designed for the M151 and M718Ambulance jeeps.
Each cushion is double stitched as per original military design. Our exclusive “Pincore” foam inserts prevent any
bottoming and afford maximum riding comfort. Do not confuse this foam with standard off the shelf less dense
and less expensive foam commonly used in other reproduction cushion sets. Rubberized curled hair inserts are
available on special order. Seat back and bottom cushions are approximately 2-1/2" thick. These are the same
cushions that we used to supply the U.S. government and AM General, and have such features as front seat
map pockets and adjustable bottom seat snap fastener straps. Mil-spec O.D. canvas or rip-stop vinyl available.
Sometimes we can offer, but only while the supply lasts, original issue vinyl seat cushions and enclosures!
Originally made for the M151A2, these can also be used on any of the M151 series jeeps. The military
rip-stop vinyl is much more durable and maintenance free when compared to canvas, and is perfect for
the practical user of the M151. An added enclosure bonus? All rods and frames can be included at a
great price!
Although the M151’s were not issued with summer tops, we simplified our original winter top patterns
by eliminating non-essential flaps, hardware, and reinforcements required for side curtains. The top cost
is reduced yet incorporates our high quality materials and construction standards, and maintains overall
original appearance. Features include (2) center bow flaps, double stitched rear bow seam, reinforced
lower rear panel, heavy D.O.T. approved early double or late single window, mil-spec black hardware,
and issue stenciling. These tops don’t accept curtains and can’t be converted to a winter top later.
Mil-spec O.D. canvas or rip-stop vinyl available.
Our winter enclosure exactly duplicates original issue. Features include full reinforcements and flaps to
accept side curtains, lower rear panel and rear bow reinforcements, heavy D.O.T. approved early double
or late single window, mil-spec black fasteners, (2) center bow flaps, and issue stenciling. We have
produced these tops for the US government. The door covers have original black turn fasteners around
the canvas perimeter so the cover can be removed for repair or for collapsing and stowing the door
frame. Door frames and enclosure rod work can be supplied. Some key side curtain canvas hardware
supplied uninstalled to account for minor variations in your jeep body and bows. Mil-spec O.D. canvas
or rip-stop vinyl available.
Pretty much everything we talked about for the M151 series jeeps tops, enclosures, straps, and cushion sets can be said for our breath-
taking M718 Ambulance series summer tops, full winter enclosures or seat cushion sets. We can produce the tops or enclosures with
or without the red crosses on white backgrounds in almost any color canvas or rip-stop vinyl materials. M151 series jeep products can
also be made in a multitude of colors.
Build your custom CUSHION SET (in an Array of Canvas or Vinyl Colors)
ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
SEAT FRONT ......................DRIVER ................UPPER (M151 or M718) ....Base Part Number ...............E2301-1 ..................E2301-1
SEAT FRONT ......................DRIVER ................LOWER (M151 or M718)....Base Part Number ................E2301-2 ..................E2301-2
SEAT FRONT ......................PASSENGER ........UPPER (M151 or M718) .....Base Part Number ................E2301-1 ..................E2301-1
SEAT FRONT ......................PASSENGER ........LOWER (M151 or M718)....Base Part Number ................E2301-2 ..................E2301-2
SEAT REAR ........................................................UPPER .(M151 only) ...........Base Part Number ................E2301-5 ..................----------
SEAT REAR .........................................................LOWER (M151 only) ...........Base Part Number ................E2301-6 ..................----------
REAR FENDER WELL CUSHION (2 required) ..........LOWER(M718 only) ..........Base Part Number ................E2381 .....................EA2381-L
Build your custom TOP or ENCLOSURE (in an Array of Canvas or Vinyl Colors)
ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
M151 M718
SUMMER TOP (will not accept side curtains or doors): .....................................................E2308 ................................EA2308
WINTER TOP OR ENCLOSURE (will accept side curtains & doors) .............................E2320, E2320-VN.............EA2320
ROD KIT FOR TOP BOW SUPPORT (SET) ...................................................................E2319-RODKIT................EA2319-RODKIT
DOOR FRAME KIT (PAIR) ..............................................................................................E2319-DOORKIT .............E2319-DOORKIT
TOP BOW SET ....................................................................................................................E1858 ................................EA1858
For original top bows, brackets, castings, rods, door frames, and bow nuts, see the JEEP TOP BOWS, BRACKETS,
& ACCESSORIES section of this catalog! Straps and all other accessories are in the
JEEP STRAPS & WELTS section starting on Page 54.
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 45
GROUP 18: FRONT SEAT FRAME SPOTTER'S GUIDE
BEFORE YOU ORDER YOUR SEAT CUSHIONS OR COVERS,
MAKE SURE THAT YOU KNOW WHAT SEAT FRAMES YOU HAVE!
MB or GPW DRIVER (LATE STYLE B1811 or EARLY STYLE B1811-E)
UPPER SHEET METAL PAN HAS (2) REINFORCEMENT BEADS ROLLED FROM SIDE TO SIDE THAT ARE VISIBLE FROM THE REAR OF THE JEEP;
SEAT CUSHIONS SIT ON THE FACE OF THE PAN & ATTACH WITH SCREWS & WASHERS; CUSHION DOES NOT COVER BACK SIDE OF THE UPPER SEAT PAN.
LOWER BOTTOM PAN IS WELDED TO THE SEAT FRAME & HAS ACCESS HOLES FOR THE GAS TANK FILLER CAP.
B1811 IS THE LATE STYLE SEAT FRAME FOR GAS TANK B0301-LH WITH THE LARGE 4-5/8" DIAMETER FILLER NECK CAP;
Late Style B1811-E IS THE EARLY STYLE SEAT FRAME FOR GAS TANK B0301-EH WITH THE SMALL 2-7/8" DIAMETER FILLER NECK CAP.
with Large
UPPER PAN SIZE: 18" WIDE X 14" HIGH LOWER PAN SIZE: 18" WIDE X 15-1/2" FRONT TO BACK
Gas Tank Filler
Hole (B1811) CAN BE RETROFITTED OR FOUND IN ANY JEEP; SOLD AS A BARE FRAME. YOU MUST ORDER UPHOLSTERY SEPARATELY.
(2A1811) CJ2A; (3A1811) CJ3A & 1950'S EARLY CJ3B; (C1811-N) M38 DRIVER
UPPER SHEET METAL PAN HAS (3) REINFORCEMENT BEADS ROLLED FROM SIDE TO SIDE THAT ARE VISIBLE FROM THE REAR OF THE JEEP;
SEAT CUSHIONS SIT ON THE FACE OF THE PAN & ATTACH WITH SCREWS & WASHERS; CUSHION DOES NOT COVER BACK SIDE OF THE UPPER SEAT PAN.
LOWER COVER/CUSHION IS DRAWSTRINGED AROUND A REMOVEABLE SHEET METAL PAN, (SOMETIMES REPLACED WITH PLYWOOD).
THE LOWER PAN BOLTS TO THREE CROSS BARS ON LOWER SEAT FRAME
SEAT HAS TWO LEGS THAT BOLT TO FLOOR IN VARYING CONFIGURATIONS CJ2A
REAR OF SEAT LEANS ON & BOLTS TO FENDER WELL
(2A1811)
M38 CJ3A
(C1811-N) CAN BE RETROFITTED OR FOUND IN ANY JEEP or CJ3B
also fits UPPER PAN SIZE: 18" WIDE X 18" HIGH LOWER PAN SIZE: 18" WIDE X 15-1/2" FRONT TO BACK (3A1811)
CJ3A & CJ3B also fits M38
SOLD AS A BARE FRAME. YOU MUST ORDER UPHOLSTERY SEPARATELY.
(2A1812) CJ2A & (3A1812) CJ3A, M38 & EARLY 1950'S CJ3B PASSENGER
UPPER SHEET METAL PAN HAS (3) REINFORCEMENT BEADS ROLLED FROM SIDE TO SIDE THAT ARE VISIBLE FROM THE REAR OF THE JEEP
UPPER SEAT CUSHION SITS ON THE FACE OF THE PAN & ATTACHES WITH SCREWS & WASHERS; CUSHION DOES NOT COVER BACK SIDE OF THE UPPER SEAT PAN.
LOWER COVER/CUSHION IS DRAWSTRINGED AROUND A REMOVEABLE SHEET METAL PAN, (SOMETIMES REPLACED WITH PLYWOOD).
PAN BOLTS TO THREE CROSSBARS ON LOWER SEAT FRAME
SEAT HAS TWO LEGS THAT HINGE ON TWO BRACKETS AT THE FRONT EDGE OF THE PASSENGER SIDE TOOL BOX;
SEAT LEANS ON FENDER WELL & CAN SWIVEL FORWARD.
CAN BE RETROFITTED OR FOUND IN ANY JEEP WITH THE UNDER SEAT TOOL BOX
UPPER PAN SIZE: 18" WIDE X 18" HIGH LOWER PAN SIZE: 18" WIDE X 15-1/2" FRONT TO BACK
SOLD AS A BARE FRAME. YOU MUST ORDER UPHOLSTERY SEPARATELY.
ALL EARLY CJ5 & CJ6; LATE 1960'S CJ3B LOW BACK BUCKET SEATS
CONTOURED, MORE MODERN LOW BACK FRONT BUCKET SEATS WITH NO SEAT UPPER OR LOWER METAL PAN
SPRINGS SPAN ACROSS TUBE STEEL FRAME & ARE A NON-REMOVEABLE INTEGRAL PART OF FRAME
ORIGINAL COVERS COVERED ENTIRE FRONT SEAT UPPER PORTION; THERE IS NO UPPER SHEET METAL PAN
VISIBLE FROM THE REAR OF THE JEEP; COVERS ARE UPHOLSTERED ON WITH HOG OR "C" RINGS.
SEAT HAS APPEARANCE OF THE 1960'S LOW BACK CAR SEATS (LIKE IN A 60'S MUSTANG CONVERTIBLE).
PASSENGER SEAT LEANS ON FENDER WELL & CAN SWIVEL FORWARD.
CAN BE RETROFITTED OR FOUND IN ANY JEEP
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 46
GROUP 18: REAR SEAT FRAME SPOTTER'S GUIDE
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 47
GROUP 23: CJ SERIES CIVILIAN JEEP SEAT COVERS & CUSHIONS
SITUATION 1: SITUATION 2: SITUATION 3: SITUATION 4:
SEAT FRAMES WITH SPRINGS SEAT FRAMES; NO SPRINGS SEAT FRAMES; NO SPRINGS; SEAT FRAMES & SUSPENDED SPRINGS;
& LOWER PANS BUT WITH LOWER PANS NO FRONT LOWER PANS WAS NEVER MADE WITH PANS
Build your custom SEAT COVER or CUSHION SET (in an Array of Canvas or Vinyl Colors)
ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
DRIVER ................... UPPER .....................(2-1/2" Thick) ........................... Base Part Number ...2A2302-1
DRIVER ................... LOWER....................(3" Thick)................................... Base Part Number ...2A2302-2
2A PASSENGER ........... UPPER .....................(2-1/2" Thick) ........................... Base Part Number ...2A2302-1 Installation
PASSENGER ........... LOWER....................(3" Thick)................................... Base Part Number ...2A2302-2 Kit
FRONT SEAT
FITS SEAT FRAMES 2A1811 2A1812 3A1811 3A1812 C1811-N D1811-N Fronts Only
2A2303-F
DRIVER ........................ UPPER ..........................(2-1/2" Thick) ....................................................... Base Part Number ........2A2302-1 (1 Kit Required)
CJ2A DRIVER ........................ LOWER.........................(3" Thick; Unoriginal roomier thickness) .......... Base Part Number ........2A2302-2
(Screws & Washers)
CJ3A DRIVER ........................ LOWER.........................(5" Thick; Original thickness) ............................. Base Part Number ........3A2302-2 Pan Screw
PASSENGER ................ UPPER ..........................(2-1/2" Thick) ....................................................... Base Part Number ........2A2302-1 B2306-S
(8 Required)
EARLY PASSENGER ................ LOWER.........................(3" Thick; Unoriginal roomier thickness) .......... Base Part Number ........2A2302-2
CJ3B PASSENGER ................ LOWER.........................(5" Thick; Original thickness) ............................. Base Part Number ........3A2302-2
FITS SEAT FRAMES 2A1811 2A1812 3A1811 3A1812 C1811-N D1811-N
CJ5 DRIVER ...................UPPER ....................(Cover Only) ............................. Base Part Number ...5L2302-1
Installation
CJ6 DRIVER ................... LOWER....................(Cover Only) .............................. Base Part Number ...5L2302-2 Kit
Fronts Only
LATE PASSENGER ........... UPPER .....................(Cover Only) ........... .................Base Part Number ...5L2302-3 B3061-X2G-P-1
PASSENGER ........... LOWER....................(Cover Only) .............................. Base Part Number ...5L2302-4 (Hog Ring)
CJ3B (As Required)
FITS SEAT FRAMES 5L1811 5L1812
REAR ....................... UPPER ...(6" High x 30" Wide) ................................. Base Part Number ...B2301-5 Installation
REAR ....................... LOWER..(2-1/2" Thick; Fits inside of tubing) .......... Base Part Number ...B2301-6
Kit
ABOVE FITS SEAT FRAMES B1813 2A1813
2A REAR FENDER WELL CUSHIONS (Pair; 10" x 29") .............................. Base Part Number ...B2381
REAR FENDER WELL CUSHIONS (Pair; 10" x 32") .............................. Base Part Number ...C2381
Rear Only
B2303-R
(1 Kit Required)
INSTALLATION KIT (Screws & Washers) for Fender Cushions ............... Base Part Number ...B2381-IKIT
REAR SEAT
REAR ....................... UPPER ...(15" High x 30" Wide) ............................... Base Part Number ...3A2302-5 Installation
REAR ....................... LOWER..(2-1/2" Thick; Fits inside of tubing) .......... Base Part Number ...B2301-6
ABOVE FITS SEAT FRAME 3A1813
Kit
Rear Only
3A REAR FENDER WELL CUSHIONS (Pair; 10" x 29") .............................. Base Part Number ...B2381
REAR FENDER WELL CUSHIONS (Pair; 10" x 32") .............................. Base Part Number ...C2381
3A2303-R
(1 Kit Required)
INSTALLATION KIT (Screws & Washers) for Fender Cushions ............... Base Part Number ...B2381-IKIT (Screws & Washers)
CJ5 REAR ....................... UPPER ...(15" High x 30" Wide) ............................... Base Part Number ...3A2302-5 Installation
CJ6 REAR ....................... LOWER..(4" Thick; Covers perimeter of tubing) .... Base Part Number ...3B2302-6
ABOVE FITS SEAT FRAME 3B1813
Kit
REAR FENDER WELL CUSHIONS (Pair; 10" x 29") .............................. Base Part Number ...B2381 Rear Only
LATE REAR FENDER WELL CUSHIONS (Pair; 10" x 32") .............................. Base Part Number ...C2381 3B2303-R
(1 Kit Required)
CJ3B INSTALLATION KIT (Screws & Washers) for Fender Cushions ............... Base Part Number ...B2381-IKIT (Screws & Washers)
BEFORE ORDERING, BE CAREFUL! JEEPS WERE OFTEN BOUGHT FROM THE FACTORY WITH ONLY A
IDENTIFY YOUR SEAT FRAMES & YOUR SITUATION AS DRIVER'S SEAT! THE PASSENGER & REAR SEAT MAY HAVE BEEN
SHOWN ABOVE BY USING THE ADDED, EVEN BY THE WILLYS DEALERSHIP LATER ON, WITH
"SEAT FRAME SPOTTER'S GUIDES" WHATEVER FIT!
ON PAGES 46 & 47
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 48
GROUP 23: CJ SERIES CIVILIAN JEEP SEAT COVERS, TOPS, & ENCLOSURES
These covers duplicate the original CJ Series Jeep spring assembly covers and cushions, and are available in olive drab, grey, tan, or black
cotton canvas or olive drab, black, red, grey, white, tan, or brown vinyl. Each cover is double stitched as per original W-O specifications
and is ready for you to install on your springs! Springs unreplaceable or missing? Seat pans rusted out? NOT TO WORRY! Check out our
CUSHION AND COVER ORDER GUIDE & SEAT FRAME SPOTTER'S GUIDES on pages 46, 47, & 48. Look for your particular
situation and use the grid to find the solution! Simple as that! The Spotter's guide will show you what to order to get you into a full seat
cushion arrangement. We can also re-pad and recover your original seat springs. (You must supply the springs, front seat bottom spring
pans stripped, cleaned and painted. For original CJ2A rear seat springs, upper and lower, or original CJ3A rear seat bottom springs, you
must also supply the border wire that is sewn into the cover.)
CJ Series "TRAILRUN" HALF & FULL SUMMER TOPS or DELUXE "WINTER" HALF OR FULL ENCLOSURES
Although these jeeps were not issued with summer tops, we simplified our original winter top patterns by eliminating non-essential
flaps, hardware, and reinforcements required for side curtains. The top cost is reduced yet the top still uses our high quality materials
and constuction standards, and maintains overall original appearance. Features includes double stitched rear bow seam, reinforced lower
rear panel, heavy weight D.O.T. approved safety window, black hardware, and issue stenciling. (NOTE: These tops don’t accept curtains
and can’t be converted to a winter top later.). Our Willys-Overland design CJ series jeep enclosures conform to original dimensions and
utilize original bow and rod work. These enclosures are constructed from heavy CJ grey, olive drab, tan, or black cotton canvas, and
duplicate the original full and half cab options. All windows are heavy weight D.O.T. approved (on CJ2A tops, windows are sized such
that original CJ2A window frames can be installed at a later date). Some key side curtain canvas hardware is supplied uninstalled allow-
ing for variations in your jeep body and bows, providing for a perfect custom fit! Use the TOP & ENCLOSURE SPOTTER'S GUIDE
on page 50 to determine what you need!
MILITARY Style Field Expedient "TRAILRUN" TOPS & ENCLOSURES for CJ SERIES CIVILIAN JEEPS
Whether you have a mix & match jeep or are just trying to give your beauty that militarized appearance by signing it up for active
duty, we can make a top or enclosure that fits the bill! (Additional hole drilling, metal and framework is required)
Here are just a few examples!
CJ2A Body with CJ2A Windshield & MB Top Bows .......(Summer Top) ......2A2308-MB-2A ......(Winter Enclosure) ..............2A2340-MB
CJ2A Body with CJ2A Windshield & M38 Top Bows ......(Summer Top) ......2A2308-M38-2A.....(Winter Enclosure) ..............2A2340-M38
CJ2A CJ3A CJ3B CJ5
NOTE: Straps and all other accesories are in the JEEP STRAPS & WELTS section. MADE IN U.S.A.!
(5) PIECE
DELUXE (6) PIECE
WINTER DELUXE (7) PIECE
HALF CAB WINTER DELUXE
ENCLOSURE HALF CAB WINTER
ENCLOSURE HALF CAB TO
FULL CAB
CONVERSION
ENCLOSURE
Build your custom TOP or ENCLOSURE (in an Array of Canvas Colors)
ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
HALF CAB DELUXE WINTER TOPS & ENCLOSURES (3-piece & 4-piece Versions):
DELUXE WINTER HALF TOP ENCLOSURE (Base Part Number) ...........................2A2321.......................3A2321.......................3B2321 .......................5E2321
(Will accept side curtains or doors; half cab only; can not be added to in order to make a full cab)
FULL CAB DELUXE WINTER TOPS & ENCLOSURES (5-piece & 6-piece Versions):
DELUXE WINTER HALF TOP ENCLOSURE (Base Part Number) ...........................2A2320.......................3A2320.......................3B2320 .......................5E2320
(Will accept side curtains or doors; full cab only; does not break down to half cab)
FULL CAB DELUXE WINTER FULL CAB TO HALF CAB CONVERSION ENCLOSURES (7-piece Versions):
DELUXE WINTER HALF TOP ENCLOSURE (Base Part Number) ...........................2A2317.......................3A2317.......................3B2317 .......................5E2317
(Will accept side curtains or doors; breaks down from a full cab to a half cab top)
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 50
GROUP 18: TOP BOW SPOTTER'S GUIDE
MB GPW (B1858)
BOWS MOUNT WITH EXTERNAL BRACKETS ON OUTSIDE OF REAR QUARTER PANELS
BOWS PIVOT INTO THE UP OR DOWN POSITION
ROUND ENDS BOWS ACT AS HAND RAIL IN DOWN POSITION
B1858 B0WS CAN BE USED OR FOUND RETROFITTED ON: B1859, G1859, & B1859-W
CJ2A CJ3A CJ3B CJ5 CJ6 M38 M38A1 WITH B1859, G1859 or B1859-W
2A2014-KIT
CJ3A (3A2003) & M38 (C2003)
WINDSHIELD IS (1) PIECE WITH CLOSED VENT IN CENTER IN SHEET METAL PANEL BELOW GLASS
WINDSHIELD DOES NOT HAVE AN INNER SWING OUT GLASS FRAME
HEIGHT: 26-1/2" WINDSHIELD USES A "C" CHANNEL ROPE TRACK ABOVE THE GLASS FOR TOP ATTACHMENT
AT CENTER WINDSHIELD CAN BE USED OR FOUND RETROFITTED ON MB GPW CJ2A CJ3B
CJ3B (3B2003)
WINDSHIELD IS (1) PIECE WITH PLAIN FLAT STEEL PANEL BELOW GLASS
WINDSHIELD DOES NOT HAVE AN INNER SWING OUT GLASS FRAME
HEIGHT: 22"
WINDSHIELD USES A "C" CHANNEL ROPE TRACK ABOVE THE GLASS FOR TOP ATTACHMENT
AT CENTER
WINDSHIELD CAN BE USED OR FOUND ON MB GPW CJ2A M38
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 51
GROUP 18 & 23: JEEP TOP BOWS, RODS, BRACKETS, & ACCESSORIES
We can supply top bows and brackets for most military and civilian jeeps. These bows duplicate all original dimensions and specs and
are an absolute must in order for your original top to work and fit properly. MB & GPW (B1859, G1859, or B1859-W), M38 (C1859),
M38A1 (D1859) military style top bow bracket sets contain (8) pieces which include cast thumbscrews
FRAME DOOR, HANDLE, LATCH PLATE & SUPPORT ROD KITS
VEHICLE TOP BOW BOW BRACKET THUMBSCREW
SET SET WIRES & CHAINS
MB .............................. B1858 ..................... B1859 or B1859-W .....................B1857
GPW ........................... B1858 ....................... B1859 or G1859 ........................G1857
M38 or M38A1 .......... C1858 .......... (M38) C1859; (M38A1) D1859...........C1857
M151 SERIES.............E1858 ................................. ------ .................................C1857
CJ2A, CJ3A or CJ3B... 2A1858 ............................. 2A1859 ................................ ------
CJ5 or CJ6 .................5E1858 ......................... 2A1859-2PR............................ ------
The DOOR KIT includes (2) door frames, handles, latch plates, striker plates, & rivets necessary to add doors to your jeep. You must
however, also use the ROD KIT in order to frame the jeep doorway for use with a winter enclosure. These kits supply the metal parts as per
original Willys Overland specifications, and assume that your jeep is complete as it left the factory. (In order to install a winter enclosure,
additional components may have to be ordered if they are missing from your jeep; such as windshield or body door pivot hinges).
DOOR FRAME (PAIR) KIT SUPPORT ROD KIT
MB/GPW Late Style Winter Enclosure (B2340-L) Door & Rod Kit ............B2319-RODKIT.......................B2319-DOORKIT
M38 Winter Enclosure (Base Part Number C2320) ............................................C2319-RODKIT......................3A2319-DOORKIT
M38A1 Winter Enclosure (Base Part Number D2320) .......................................D2319-RODKIT......................5E2319-DOORKIT
CJ2A Winter Enclosure (Base Part Numbers 2A2320 & 2A2321) .....................2A2319-RODKIT....................3A2319-DOORKIT
CJ3A Winter Enclosure (Base Part Numbers 3A2320 & 3A2321) .....................3A2319-RODKIT....................3A2319-DOORKIT
CJ3B Winter Enclosure (Base Part Numbers 3B2320 & 3B2321) .....................3A2319-RODKIT....................3A2319-DOORKIT
CJ5 Winter Enclosures (Base Part Numbers 5E2320 & 5E2321) .......................5E2319-RODKIT....................5E2319-DOORKIT
CJ6 Winter Enclosures (Base Part Numbers 5E2320 & 5E2321) .......................6E2319-RODKIT....................5E2319-DOORKIT
CJ2A, CJ3A, CJ3B, CJ5, or CJ6 top bow sets 2A1858 & 5E1858 require either the SUPPORT ROD KIT
listed above, or at a minimum, (1) each 2A1917-F & 2A1917-R support strap kit in order to stabilize
your bows set. MB, GPW, M38 or M38A1 top bow sets (B1858 or C1858) do not require a SUPPORT
ROD KIT, however, it is recommended that you either use one or make certain that your jeep's pivoting
top bow rivets are TIGHT and do not allow the center bow to bow to fall or "flop" onto the steering wheel
when the bow is released. The bow should stay in the position where placed so that the bow supports
the top and the top DOES NOT support the bow. See page 51 for bow descriptions.
1/4 & 1 TON TRAILER TARPS, ROPES, DATA PLATES, WIRING, & COVERS
Build your custom TRAILER TARP or COVER (in an Array of Canvas Colors)
ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
Heavy duty, quality crafted, original style construction olive drab canvas trailer tarp with features such as double reinforced corners, triple reinforced edges, plated black
brass grommets, and issue stenciling. Available in canvas or durable rip-stop vinyl. Rope kits include enough pieces of mil-spec style ‘manila’ rope, cut to proper length,
with end clips; to secure one tarp. 1/4 ton trailer tarps lised here are the flat military style that simply cover the bed opening. If you are interested in the full enclosure
covered wagon style with end curtains (as was used on the BT3-C), please call for a quote). MBT is the WWII Willys trailer, BT3 is the WWII Bantam trailer, M100 is
the Korean War trailer, M416 is the Vietnam trailer, BT3-C is the post-WWII Bantam civilian trailer with tail gate, BC is the WWII airborne Converto dump trailer.
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 52
GROUP 23: REPLACEMENT VINYL JEEP SEATS & ENCLOSURES
We are also able to supply cost effective replacement black vinyl after market jeep enclosures and seat assemblies. These enclosures are
supplied with ALL necessary hardware including door frames, brackets, top bows, mounting hardware, covers, and instructions. Nothing
else to buy! (You will have to drill holes). If you want to enclose your vehicle without the expense of original style bows and canvas, this
it the way to go! We also carry replacement after market rear seat assemblies. These seat assemblies can be retro-fitted on any earlier
jeep listed below. These are all great non-original economical solutions to your seating and top needs.
DESERT TAN SEAT COVERS & TOPS THE OLIVE DRAB BLUES
No more searching for the right mil-spec khaki-tan for your special All canvas or vinyl seat covers and tops listed in this catalog fol-
desert project. Samples are awaiting your request! This coloring is low original color and material specs as close as possible. We are,
similar to the early war khakis. however, able to provide these same covers on special order in
unoriginal color or material schemes, at nominal additional costs,
AHOY! NOW HEAR THIS! NAVY ENTHUSIASTS! if you have a special project in mind. Tell us your ideas and we can
Almost any canvas item in our catalog can now be reproduced in Navy provide quotes and samples. Our inventory of colored cotton canvas
grey colored cotton canvas! GO NAVY! Request a sample! includes OD, grey, black, & tan.
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 53
ALL GROUPS & JEEPS STRAPS, WELTS, COVERS, BOOTS, & FASTENERS
B2290 B2270-50
MB GPW
SHOWN
B2364 B2285
B2216-C
Build your custom CANVAS or WEB Product or Acceccesory (in an Array of Colors)
ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
ITEM DESCRIPTION MB GPW M38 M38A1 M151 CJ2A CJ3A CJ3B CJ5
SEAT CUSHION INSTALLATION KIT: B2303 B2303 C2303 C2303 ---- 2A2303 3A2303 3B2303 ----
Nearly (100) separate pieces of dull
black plated military finish stain-
less steel and brass slot head screw 3
nuts, and washers; fastens (1) set of
six cushions or covers to seat frames.
CRASH PAD COVERS: B2304 B2304 ---- ---- ---- ---- ---- ---- ----
Original style canvas covers
supplied so you can recover your 4
own crash pads (1 RPV; pair).
CRASH PAD INSERTS: B2304-I B2304-I ---- ---- ---- ---- ---- ----
Genuine animal hair inserts supplied 4-I
so you can recover your own crash pads (1 RPV; pair).
CRASH PADS RECOVERED: B2305 B2305 ---- ---- ---- ---- ---- ---- ----
Please supply your original metal
backs cleaned and painted. We recover
your metal backs with animal 5
hair inserts and canvas covers (1 RPV; pair).
CRASH PADS COMPLETE (with metal): B2306 B2306 ---- ---- ---- ---- ---- ---- ----
Crash pad assemblies made
from powder coated steel plates, horsehair
padding,and canvas; complete,
all ready upholstered; not a kit; 6
ready for installation (1 RPV; pair).
INSTALLATION SCREWS FOR B2305 or B2306: B2306-S B2306-S ---- ---- ---- ---- ---- ----
Round head slotted machine screws (8 RPV)
DOORWAY “HALF CURTAINS”: B2307-X B2307-X ---- ---- ---- ---- ---- ----
Duplicates original doorway
curtains using original NOS brass 7
black antique hardware;jeep must have
properly set body sockets (1 RPV; pair).
(Also see Part No. B1824)
WINDSHIELD COVER (PLAIN FACE): B2314-X B2314-X 3A2314-X 5E2314-X E2314-X* 2A2314-X 3A2314-X 3B2314-X 5E2314-X
Protects folded down windshield; prevents *E2314-A2-X
aircraft observation due to glass reflection. (For the A2-X
Originally MB or GPW issue. Accomodates windshields
with or without metal rifle racks or vacuum wiper motors. 14 windshield with large
late electric wiper motor)
(Specify plain face without a star at all; factory issue).
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 54
ALL GROUPS & JEEPS STRAPS, WELTS, COVERS, BOOTS, & FASTENERS
B1851-L (CAST)
MB GPW
SHOWN
C1851 (WIRE)
WWII WWII
1-1/2" JERRY CAN STRAP 1" BUCKLE & TIP
BUCKLE & TIP
Build your custom CANVAS or WEB Product or Acceccesory (in an Array of Colors)
ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
ITEM DESCRIPTION MB GPW M38 M38A1 M151 CJ2A CJ3A CJ3B CJ5
WINDSHIELD COVER WITH STAR or B2314-X B2314-X 3A2314-X 5E2314-X E2314-X 2A2314-X 3A2314-X 3B2314-X 5E2314-X
INVASION STAR & CIRCLE: *E2314-A2-X
Protects folded down windshield; prevents (For the A2-X
aircraft observation due to glass reflection. 14 windshield with large
(Specify plain star or star with broken invasion circle). late electric wiper motor)
STEERING COLUMN WASHER (LEATHER): B1416-L B1416-L B1416-L B1416-L B1416-L B1416-L B1416-L ----
Seals steering column at floor board RUBBER): B1416-R B1416-R B1416-R B1416-R 16 B1416-R B1416-R B1416-R 5E1416
GAS PEDAL LINKAGE BOOT (LEATHER): B0317-L B0317-L B0317-L B0317-L B0317-L B0317-L B0317-L B0317-L
Seals pedal linkage at floor board (RUBBER): B0317-R B0317-R B0317-R B0317-R ---- B0317-R B0317-R B0317-R B0317-R
17
TRANSMISSION BOOT (LEATHER): B0718-L B0718-L B0718-L B0718-L ---- B0718-L B0718-L B0718-L B0718-
Genuine dark brown leather boot (RUBBER): B0718-R B0718-R C0718 C0718 ---- 2A0718 2A0718 2A0718 2A0718
TRANSFERCASE BOOT
Genuine dark brown leather boot
(LEATHER): B0818-L
(RUBBER): B0818-R
B0818-L
B0818-R
B0818-L
2A0818
B0818-L
2A1818
18
---- B0818-L
2A0818
B0818-L
2A0818
B0818-L
2A0818
B0818-L
2A0818
HOOD WELT KIT: B1719 B1719 2A1719 5E1719 ---- 2A1719 2A1719 3B1719 5E1719
Pre-cut 3/4" dual beaded welt buffers Use B1719-E
radiator grill top from hood;includes rivets for Slat Grill
MB Jeeps
19
STRAP SET for AX & SHOVEL: B1920 B1920 B1920 D1920 E1920 ---- ---- ---- ----
100% Cotton straps with original
style appropriate WWII or postwar
plated dull black buckles and tips; 20
authentically secures tools on jeep.
STRAP SET for TOP BOW STOWAGE: B1921 B1921 C1921 D1921 E1921 2A1921 2A1922 2A1922 2A1922
100% Cotton straps with original
style appropriate WWII or postwar
plated dull black buckles and tips;
21
secures stowed or folded top bows to jeep.
COLLAPSIBLE WATER BUCKET: B2395 B2395 B2395 B2395 B2395 B2395 B2395 B2395 B2395
2-gallon reinforced pail as seen on almost
every WWII and many post war military vehicles. 95
COLLAPSIBLE WATER PITCHER: B2398 B2398 B2398 B2398 B2398 B2398 B2398 B2398 B2398
RARE! Canvas pitcher stowed in the glove or
tool box; used to fill radiators. Really rare & handy! 98
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 55
ALL GROUPS & JEEPS STRAPS, WELTS, COVERS, BOOTS, & FASTENERS
Build your custom CANVAS or WEB Product or Acceccesory (in an Array of Colors)
ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
ITEM DESCRIPTION MB GPW M38 M38A1 M151 CJ2A CJ3A CJ3B CJ5
STRAP SET for TOP STOWAGE: B1922 B1922 C1922 D1922 E1922 2A1922 2A1922 2A1922 2A1922
100% Cotton straps with original style WWII
or postwar dull black plated buckles and tips;
secures MB or GPW jeep top under passenger
22
seat; M38, M38A1,or CJ jeep top to fender wells;
M151 jeep top under rear seat. 24
STRAP for securing TANDEM TOW BAR: B1924 B1924 B1924 B1924 ---- B1924 B1924 B1924 B1924
100% Cotton strap with original dull black
plated buckle and tip; secures tandem tow
bar to jeep grill block B2212. 23
STRAP for WINDSHIELD TIE DOWN : ---- ---- C1923 D1923 E1923 2A1923 2A1923 2A1923 2A1923
100% Cotton strap with original
plated dull black buckle and tip;
secures jeep windshield to hood when
in folded down position.
DOORWAY BODY CANVAS FASTENERS: B1824 B1824 ---- D1824 ---- B1824 ---- ---- D1824
Original style dull military black (Optional)
finish body fastener for both door ways;
(14) sockets required MB 24
or GPW Half Curtains (B2307);
(4) sockets required for CJ2A doors;
(8) studs required for M38A1or M170 doors. B1824 D1824
REPLACEMENT M38A1 BODY FASTENER: ---- ---- ---- 2A2025-R ---- ---- ---- ---- ----
Unoriginal mil-spec black body “turn” head
fastener for M38A1 doorways; 25R
(8) studs required for M38A1 or M170 doors;
replaces Part No. D1824. 2A2025
2A2025-R
WINDSHIELD STUD for late MB or GPW: B2025-A B2025-A ---- ---- ---- ---- ---- ---- ----
Steel late “capstan” style`
reproduction studs made with
permission from the original 25A
manufacturer; don’t confuse these B2025-B
with soft steel or brass foreign B2025-A
reproductions available elsewhere;
set of (10) required per jeep.
(Recommended for durability over B2025-B)
CJ2A
SHOWN
2A2025-R 2A2025
36 37
2A1851
C1851
Footman
B1824 Loop
50
D1824
M38A1
SHOWN
Build your custom CANVAS or WEB Product or Acceccesory (in an Array of Colors)
ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
ITEM DESCRIPTION MB GPW M38 M38A1 M151 CJ2A CJ3A CJ3B CJ5
CIVILIAN TOP BOW STABILIZING STRAP KITS: ---- ---- ---- ---- ---- 2A1917-F 2A1917-F 2A1917-F 2A1917-F
This is an economical strap kit that replicates the ---- ---- ---- ---- ---- 2A1917-R 2A1917-R 2A1917-R 2A1917-R
function of the more expensive original top bow
2319 series support rods for stabilizing the original (6) piece
nesting1858 series CJ top bows when using only a summer top. 17
(-F ) FRONT bow to windshield, (-R) REAR bow to center bow)
FUEL TANK HOLD DOWN STRAP WELT KIT: B0330 B0330 C0330 D0330 ---- 2A0330 2A0330 2A0330 2A0330
Pre-cut welt buffers hold down straps & tank.
30
FUEL TANK to FLOOR PAN WELT KIT: B0331 B0331 C0331 D0331 ---- 2A0331 2A0331 2A0331 2A0331
Pre-cut welt buffers tank underside & floor.
31
RADIATOR GRILL AIR DEFLECTION KIT: B1732 B1732 C1732 ---- ---- 2A1732 2A1723 2A1732 ----
Pre-cut genuine animal hair strips
used to deflect air into radiator for
MB,GPW,and CJ jeeps. M38’s kit uses
rubberized felt. (specify sheet metal 32
or slat grill.)
2-PIECE JERRY CAN STRAP KIT with Rivets: B1934 B1934 C1934 C1934 E1934 C1934 C1934 C1934 C1934
Original factory style 2-piece pre-cut 100% cotton straps
rivets directly to can holder B1855.
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 57
ALL GROUPS & JEEPS STRAPS, WELTS, COVERS, BOOTS, & FASTENERS
Build your custom CANVAS or WEB Product or Acceccesory (in an Array of Colors)
ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
ITEM DESCRIPTION MB GPW M38 M38A1 M151 CJ2A CJ3A CJ3B CJ5
FENDERS & STEP-UP PADS WELT KIT: B1739 B1739 B1739 5E1739 ---- B1739 B1739 B1739 5E1739
Pre-cut welt kit used between fenders, body,
& step-up pads (One kit required per vehicle; 1 RPV). 39
FRAME WELT KIT: B1540 B1540 2A1540 5E1540 ---- 2A1540 2A1540 2A1540 5E1540
Pre-cut welt kit used between all
contact points of the frame and
body as parts manual requires. (1 RPV)
40
STEERING COLUMN WELT: B1441 B1441 B1441 B1441 B1441 B1441 B1441 B1441 B1441
Pre-cut welt used between steering
column and column bracket to
buffer metal to metal contact.
41
INNER WINDSHIELD CANVAS WELT KIT: B2042-C B2042-C ---- ---- ---- ---- --- ---- ----
Pre-cut kit seals (3) edges of MB or GPW
inner windshield to outer windshield frame. For others; 42
seals glass directly to outer frame. RUBBER KIT: B2042-R B2042-R 3A2042 3A2042 ---- B2042-R 3A2042 3A2042 3A2042
FELT PEDAL WASHER: B0244-1 B0244-1 B0244-1 B0244-1 ---- B0244-1 B0244-1 B0244-1 B0244-1
Felt washers prevent clutch & brake
pedals from clanging on floor pan (2 RPV). 44
BACKUP SPRING FOR B0244 WASHER: B0244-SPG B0244-SPG B0244-SPG B0244-SPG ---- B0244-SPG B0244-SPG B0244-SPG B0244-SPG
TIRE CHAIN BAG: B2376-X B2376-X B2376-X B2376-X B2376-X B2376-X B2376-X B2376-X B2376-X
Rare accessory for carrying tire
chains in your tool box; can be stenciled for
Ford or Willys jeeps. (Holds 2 chains per bag)
76
PARTS MANUAL POUCH: B2382 B2382 B2382 B2382 B2382 B2382 B2382 B2382 B2382
Canvas or vinyl pouch for 8 1/2" x 11" parts
manual. (Actual pouch size 11"x14".) 82
MAINTENANCE MANUAL POUCH: B2383 B2383 B2383 B2383 B2383 B2383 B2383 B2383 B2383
Canvas or vinyl pouch for 8 1/2" x 11"
maintenance manual. (Actual pouch size 8"x11".) 83
LOWER WINDSHIELD TO COWL
WEATHERSTRIP GASKET: B2086* B2086* 3A2086* 5E2086 ---- B2086* 3A2086* 3A2086* 5E2086
Heavy original style rubber gasket
that seals your outer windshield
frame to the body cowl.
(*These are interchangeable)
86
VEHICLE SIREN COVER: B2385 B2385 B2385 B2385 B2385 B2385 B2385 B2385 B2385
Cover for Federal Signal Co.
vehicle siren Model EGH
85
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 58
GROUP 19 & 23: 1/2 & 3/4 TON DODGE COMMAND CAR SEATS & TOPS
CUSHION SET, 1/2 TON TON OPEN CAB ...................... Base Part Number .................. 2W2301-R-X
CUSHION SET, 3/4 or 1-1/2 TON TON OPEN CAB ........ Base Part Number .................. 3W2301-R-X
Build your custom CAB, CARGO COVERS & END CURTAINS
(in an Array of Canvas or Vinyl Colors) ON-LINE by inserting the base part number below into the
"SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
Our beautifully detailed and researched Dodge & cargo covers features include original style reinforcements,
mil-spec black grommets, fasteners, buckles, issue stenciling, genuine heavy leather side roll-up buckle
assemblies on the cargo covers (allows you to roll-up and secure each cargo tarp side)and leather strap
assemblies on the cab covers , brass riveted leather reinforced rope casings, and mil-spec ‘manila’ casing
rope. For economy, the cab and cargo cover can be supplied with late style olive drab cotton buckle assem-
blies or no roll-up buckles at all. You have your choice of original flapped window openings or a number
of other options on the end curtains. No other top anywhere competes with this tops authenticity.
1/2 Ton Closed Cab 1/2 Ton Open Cab 3/4 Ton Open Cab 1-1/2 Ton Open Cab
CAB TOP with Web or Leather Buckle Assemblies ..................................-------. ........... 2W2309-X.......... . 3W2309-X......... ..3W2309-X
CARGO COVER with Web or Leather Buckle Roll-UPs & Trim.. ..... 2WC2307-X ........ 2W2307-X........... 3W2307-X............4W2307-X
ROPE KIT, SIDES of CARGO COVER (1 kit required) .......... ...... VW1910-R .......... VW1910-R........... 3W1910-R............4W1910-R
END CURTAIN with Optional Openings or Flaps (1 or 2 needed) ....... 2W2313-X ........... 2W2313-X. .......... 3W2313-X.. .........3W2313-X
ROPE KIT, END CURTAIN (2 kits required) .............................. ...... VW1913-R .......... VW1913-R........... 3W1913-R............3W1913-R
Build your custom SEAT COVER or CUSHION SET (in an Array of Canvas or Vinyl Colors)
ON-LINE by inserting the base part number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
DRIVER ................... UPPER ... Base Part Number... DG2302-1X REAR BENCH ....... UPPER SHORT .......Base Part Number... DGC2301-5X-S
M37 DRIVER ................... LOWER.. Base Part Number... DG2302-2X REAR BENCH ........ LOWER SHORT .....Base Part Number... DGC2301-6X-S
PASSENGER ........... UPPER ... Base Part Number... DG2302-3X REAR BENCH ........ UPPER LONG ........Base Part Number... DGC2301-5X-L
M42 PASSENGER ........... LOWER.. Base Part Number... DG2302-4X REAR BENCH ........ LOWER LONG .......Base Part Number... DGC2301-6X-L
Build your custom CAB, CARGO, END CURTAINS and STRAP SETS (in an Array of Canvas or Vinyl Colors)
ON-LINE by inserting the base part number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
Our cargo and cab cover assemblies are also the same covers that we supply the U.S. Government. If you want that perfect detailed res-
toration, these covers will help you finish the job! Features for these truck covers include full stress point reinforcements, mil-spec black
grommets, fasteners, and buckles, mil-spec genuine manilla casing rope, and issue stenciling. Limiting your budget? You may choose
a cargo cover without any side roll-up buckles assemblies (you need roll-up buckle assemblies in order to secure both sides of the cargo
tarp in the rolled up position). To further save you money on our CAB TOPS and CARGO BOX END CURTAINS, you may choose to
eliminate unnecessary reinforcements and replace rear opening rear window flaps with a static vinyl window.
CAB COVER (TOP) MIL-SPEC with Rear Panel ......................................Base Part Number ....DG2308-X
CAB COVER "BIKINI" TOP without a Rear Panel (Just canvas over head!)......Base Part Number ....DG2308-BIKINI
STRAPS (Pair) CAB TOP SUPPORT (Not included with cab tops).........Base Part Number ....DG1917
M37 CARGO COVER (TARP)...............................................................................Base Part Number ....DG2307-X
M42 CARGO BED BOW STOWAGE STRAPS (Pair; attach to bed sides) .................... Base Part Number ....DG1921
END CURTAIN (One or two required) .........................................................Base Part Number ....DG2313-X
STRAPS PIONEER TOOL TIE-DOWN ............................................. Base Part Number ....DG1920
NEW! FIREWALL PAD KIT! ................................................................ Base Part Number ....DG1848
END CURTAIN (M42 only zippered; one required rear bed) ....................Base Part Number .... DGC2313
M42 SIDE CURTAIN (Pair) (M42 only with windows) ......................................Base Part Number .... DGC2310-S
ECONOMY & DURABILITY!.........OLIVE DRAB VCP VINYL TOPS FOR THOSE WHO WORK THEIR TRUCKS!
ORDER ON-LINE by inserting the base part number below into the "SEARCH FOR" box at
www.beachwoodcanvas.com
Most Beachwood Canvas tops and covers exceed military canvas weight specifications by at least one grade. But contrary to popular
belief, canvas is NOT the best material for trucks that are being used for work, or used in conditions that demand minimum maintenance
and high durability. For these conditions, olive drab VCP vinyl products are the answer! We have access to military specification materials
at a great price that allow us to make these covers at a savings that can be passed on to you! And the beauty is that they will last longer
than canvas with less care! M37 or M42........DG2308-VCP M715......KS2308-VCP
NOTE: For other truck accessories such as winch covers, cargo bow roll-up straps, cargo cover & end curtain tie down rope kits,
chain covers, fasteners, etc., Please see the TRUCK STRAPS, WELTS, COVERS, BOOTS, AND FASTENERS section of this catalog.
Remember also that all covers listed here can be produced in a durable synthetic in other colors other than olive drab cotton canvas.
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 61
GROUP 19 & 23: WWII CHEVROLET & GMC TRUCK SEAT & COVERS
These cushions and covers duplicate the factory issue products. Each cover is double stitched as per military
design. The open cab CCKW seat back cushions and seat bottom spring covers, or the closed cab CCKW and
Chevrolet closed cab bench seat bottom and back covers are supplied ready for you to install! (Your bench
springs must be original manufacture and in good condition, adhering to original dimensions. Otherwise,
we can supply you with roll goods & spring padding for your local upholstery shop to cover the seats.)
Our beautifully detailed authentic open or closed cab cargo covers, end curtains, and open cab covers are
also the result of archive research. Features include original style reinforcements, mil-spec black grom-
mets, fasteners, buckles, issue stenciling, genuine heavy leather side roll-up assemblies on the cargo cover
(allows you to roll-up and secure each of the cargo tarp in the up position), riveted leather reinforced rope
casings, mil-spec genuine ‘manila’ casing rope, and CCKW open cab rear curtain steel reinforcement strips.
We can also recover your original open cab CCKW door frames to original specs. For economy, the cab
and cargo cover can be supplied with late style olive drab cotton roll-up buckle assemblies, or no roll-up
buckle assemblies at all. To further save you money, on our cargo box end curtains, you may choose to
eliminate unnecessary reinforcements and replace the rear window flaps with static vinyl windows, or no
window at all! No other top anywhere competes with this top’s authenticity or detail. For CCKW, specify
CCKW-353 long beds & CCKW-352 short beds, or a dump body. Specify the cargo or dump body for the
1-1/2 ton Chevrolet.
Build your custom CAB TOP, DOORS, and END CURTAINS (in an Array of Canvas or Vinyl Colors)
ON-LINE by inserting the base part number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
Closed Cab Closed Cab Closed Cab Open Cab Open Cab
Chevrolet CCKW-352 CCKW-353 CCKW-352 CCKW-353
CAB TOP (Upper & Rear Section) ...........................------- ------- ------- CK2309 CK2309
CAB DOORS (Pair) w/ Frames .................................------- ------- ------- CK2312-OF CK2312-OF
CAB DOOR COVERS (Pair) w/o Frames................------- ------- ------- CK2312 CK2312
END CURTAIN with Optional Openings ...................CH2313-X CKS2313-X CK2313-X CKS2313-X CK2313-X
with Plain Panel, Static Plastic Window or
Original Style Opening Flap
(Two curtains required per vehicle)
ROPE KIT, END CURTAIN (2 kits required) ...........CK1913-R CK1913-R CK1913-R CH1913-R CK1913-R
REAR CARGO BED SAFETY STRAP ...................3W1990 3W1990 3W1990 3W1990 3W1990
Large heavy duty 100% Cotton strap with
snap hooks on both ends.
NOTE: For other truck accessories such as winch covers, cargo bow roll-up straps, cargo cover rope kits, chain covers, fasteners, etc.,
see the TRUCK STRAPS, WELTS, COVERS, BOOTS FASTENERS section of this catalog.
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 62
GROUP 19 & 23: M34, M35, M135 & M211 SEAT, CAB & CARGO COVERS
These cushions and covers duplicate the factory issue products and are the same covers that we supply to the U.S. Government. Each cover is double stitched
as per military specification. The seat back cushions and seat bottom spring covers are supplied ready for you to install! If you are missing seat springs, we can
supply replacement cushions using our exclusive heavy density “Pincore” foam inserts. These inserts use the original style covers and prevent any bottoming
on the seat pan. (Do not confuse this foam with less dense and less expensive foam used in common upholstery applications.)
Build your custom SEAT COVER or CUSHION SET (in an Array of Canvas or Vinyl Colors)
ON-LINE by inserting the base part number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
DRIVER ................... UPPER ..."Air-Ride" Adjustable Seat ...Base Part Number . R42302-1AR
M34 DRIVER ................... LOWER.."Air-Ride" Adjustable Seat ...Base Part Number . R42302-2AR
M35
Late PASSENGER ........... UPPER .......................................................Base Part Number . R42302-3X
PASSENGER ........... LOWER......................................................Base Part Number . R42302-4X
Build your custom CAB, CARGO, END CURTAINS and STRAP SETS (in an Array of Canvas or Vinyl Colors)
ON-LINE by inserting the base part number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
Our beautifully detailed cargo covers, single piece M34 or M35 cab covers, and our two piece M135 or M211 cab covers are also the
same covers that we supply to the U.S. Government. Features include full original stress point reinforcements, mil-spec black grommets,
fasteners, and buckles, mil-spec ‘manila’ casing rope, M211/M135 cab top rear curtain steel reinforcement strips, and issue stenciling.
Additional XM211 and M135 cab cover features include a rear roll-up window and all appropriate reinforcements and straps. No other
top anywhere competes with this top’s authenticity or detail. Limiting your budget? For economy, the cargo cover can be supplied with or
no roll-up buckles at all. You have your choice of original flapped window openings or a number of other options on the end curtains.
M34 M35 M135 M211
CAB COVER :
Cab Upper & Rear Sections (No doors) R42308-X R42308-X GM42308-X GM42308-X
with Optional Plain panel, Static Plastic Window or Original Style Opening Flap
Cab Upper and Rear Section Rope Kit R42308-R R42308-R GM42308-R GM42308-R
ECONOMY & DURABILITY!.........OLIVE VCP VINYL TOPS FOR THOSE WHO WORK THEIR TRUCKS!
ORDER ON-LINE by inserting the base part number below into the "SEARCH FOR" box at
www.beachwoodcanvas.com
Most Beachwood Canvas tops and covers exceed military canvas weight specifications by at least one grade. But contrary to popular
belief, canvas is NOT the best material for trucks that are being used for work, or used in conditions that demand minimum maintenance
and high durability. For these conditions, olive drab VCP vinyl products are the answer! We have access to military specification materials
at a great price that allow us to make these covers at a savings that can be passed on to you! And the beauty is that they will last longer
than canvas with less care!
NEW! M34 or M35 Series Trucks........R42308-VCP
NOTE: For other truck accessories such as winch covers, cargo bow roll-up straps, cargo cover rope kits, chain covers, fasteners, etc.,
see the TRUCK STRAPS, WELTS, COVERS, BOOTS, AND FASTENERS section of this catalog. Remember also that all covers listed
here can be produced in a durable synthetic in other colors other than olive drab cotton canvas.
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 63
ALL TRUCK STRAPS, WELTS, BOOTS, & FASTENERS
Build your custom CANVAS or WEB Product or Acceccesory (in an Array of Colors)
ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
VEHICLE CODES: 1/2T=1/2 TON; 3/4T=3/4 TON; 1-1/2T=1-1/2 TON;
CC=WWII DODGE COMMAND CAR; WC=WWII DODGE WEAPONS CARRIER
ITEM DESCRIPTION/TRUCK MODEL 1/2TCC 3/4TCC 1/2TWC 3/4TWC 1-1/2TWC CCKW M37 M715 M34/35/135/211
CARGO BOW SLEEVES: ---- ---- VW2304 3W2304 4W2304 CK2304 DG2304 DG2304 CK2304
Sleeves that cover bows and extend the life
of your cargo cover by buffering bow to tarp
contact; (1) Kit required per vehicle (1 RPV).
4
CARGO TARP ROPE KIT: ---- ---- VW1910-R 3W1910-R 4W1910-R CK1910-R 3W1910-R VW1910-R CK1910-R
Kit includes enough pre-cut and ringed rot
resistant 'manilla' or synthetic rope to properly
tie down your cargo tarp to side bed hooks. 10R
END CURTAIN ROPE KIT: ---- ---- VW1913-R 3W1913-R 3W1913-R CK1913-R DG1913-R DG1913-R CK1913-R
Kit includes enough pre-cut and ringed rot
resistant 'manila' or synthetic rope to properly
tie down one end curtain to bed or tailgate hooks.
13R
WINDSHIELD COVER (PLAIN FACE) or with 2C2314-X 3C2314-X 2W2314-X 3W2314-X 3W2314-X ---- DG2314-X ---- R42314-X
PLAIN STAR or INVASION STAR & CIRCLE:
Protects folded down windshield; prevents
aircraft observation due to glass reflection.
(Specify plain face, plain star or star with broken invasion circle).
TRANSMISSION-TRANSFER CASE LEATHER PAD: ---- 3C0718 ---- 3C0718 3C0718 CK0718 ---- ---- ----
Genuine heavy leather pad that screws to floor 18
pans to seal transmission and transfer case levers.
TRANSMISSION PAD INSTALLATION KIT: ---- 3C0718-A ---- 3C0718-A 3C0718-A CK0718-A ---- ---- ----
Screw, bolt and/or washer kit for securing 18A
0718 series pads to transmission humps.
HOOD WELT KIT: 2C1719 3C1719 2C1719 3C1719 3C1719 CH1719 DG1719 KS1719 R41719
Pre-cut appropriate flat or dual
bead welt buffers radiator grill
top from hood; includes rivets. 19
STRAP SET for PIONEER TOOLS (LEATHER): VC1920-L VC1920-L VC1920-L VC1920-L VC1920-L VC1920-L VC1920-L VC1920-L
Genuine leather straps with original style
appropriately finished buckles; authentically 20L
secures tools on pioneer rack on truck.
STRAP SET for PIONEER TOOLS (WEB): VC1920-W VC1920-W VC1920-W VC1920-W VC1920-W VC1920-W VC1920-W KS1920 VC1920-W
100% Cotton straps with original style
WWII or Postwar dull black plated buckles & tips;
authentically secures tools on pioneer rack on truck. 20W
STRAP(S) for TOP BOW STOWAGE (WEB): 2C1921-W 2C1921-W ---- ---- ---- ---- DG1921 ---- ----
100% Cotton straps which secures all top bows
to vehicle body when in the lowered position. 21W
STRAP for TOP BOW STOWAGE (LEATHER): 2C1921-L 2C1921-L ---- ---- ---- ---- ---- ---- ----
Genuine heavy leather strap secures all top
bows to vehicle body when in the lowered position.
21L
STRAP SET for CARGO TARP SIDE ROLL-UP (WEB): ---- ---- VW1922-W VW1922-W 4W1922-W 4W1922-W VW1922-W VW1922-W 4W1922-W
100% Cotton straps which attach to the 2387 series cargo bow
corner brackets; secures cargo tarp in the rolled up position.
You must have the web roll-up buckle assemblies attached 22W
to your cargo tarp & attaching bracket VW1922-BKT. Includes rivets.
STRAP SET for CARGO TARP SIDE ROLL-UP (LEATHER): ---- ---- VW1922-L VW1922-L 4W1922-L 4W1922-L VW1922-L VW1922-L 4W1922-L
Genuine heavy duty leather straps which attach to the 2387 series
cargo bow corner brackets; secures cargo tarp in the rolled up position.
You must have the leather roll-up buckle assemblies attached 22L
to your cargo tarp & attaching bracket VW1922-BKT. Includes rivets.
STRAP SET BRACKET for 1922 SERIES STRAP SETS ABOVE: ---- ---- VW1922-BKT VW1922-BKT VW1922-BKT VW1922-BKT VW1922-BKT VW1922-BKT VW1922-BKT
Metal strap brackets that bolts to the corner bow brackets (3W2387 & CK2387)
& attaches to the 1922 roll-up straps series above; secures cargo tarp in the rolled up position. (6 required for 3-bow trucks; 10 required for 5-bow trucks)
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 64
GROUP 19 & 23: CANVAS & STRAPS !!!
ALL TRUCK STRAPS, WELTS, BOOTS, & FASTENERS
Build your custom CANVAS or WEB Product or Acceccesory (in an Array of Colors)
ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
VEHICLE CODES: 1/2T=1/2 TON; 3/4T=3/4 TON; 1-1/2T=1-1/2 TON;
CC=WWII DODGE COMMAND CAR; WC=WWII DODGE WEAPONS CARRIER
ITEM DESCRIPTION/TRUCK MODEL 1/2TCC 3/4TCC 1/2TWC 3/4TWC 1-1/2TWC CCKW M37 M715 M34/35/135/211
STRAP for WINDSHIELD TIE DOWN: ---- ---- ---- ---- ---- ---- ---- KS1923 ----
100% Cotton web cotton strap with appropriate
original dull black plated buckle and tip; secures
windshield to hood when in folded down position.
23
WINDSHIELD STUDS for WWII Dodges (NOS): ---- —— 2W2025 2A2025 2A2025 ---- ---- ----
2A2025 ----
Original NOS black finish “turn” head sheet metal
screw studs for Dodge 3/4 ton weapons carriers;
Original NOS black finish “Lift-the-Dot” head sheet
25
machine screw studs for Dodge 1/2 ton weapons carriers.
WINDSHIELD STUDS for WWII Dodges (Replacement): ---- 2W2025-R 2A2025-R 2A2025-R 2A2025-R ---- ---- ---- ----
Unoriginal NOS black finish “turn” head studs with
dual screw hole base studs for Dodge 3/4 ton weapons;
Unoriginal NOS black finish “Lift-the-Dot” head studs with
25R 2A2025-R
dual screw hole base studs for Dodge 1/2 ton weapons.
HEADLIGHT COVERS (Pair): 2C2326-X B2326-X 2C2326-X B2326-X B2326-X 2C2326-X 2C2326-X ---- ----
Original style covers protect headlights &
prevent aerial observation aerial due to glass
reflection (Optional black-out slot available). 26
.
GLOVEBOX SPARE PARTS BAG: B2327-X B2327-X B2327-X B2327-X B2327-X B2327-X B2327-X B2327-X B2327-X
Bag carries spare parts such as spark plugs,
taillight lenses,etc. in glove or tool box. 27
ORIGINAL STYLE TOOL BAG: B2328-X B2328-X B2328-X B2328-X B2328-X B2328-X B2328-X B2328-X B2328-X
WWII and post war issue 'envelope' style
tool bag; standard issue most vehicles. 28
RIFLE RACK COVER: B2329-X B2329-X B2329-X B2329-X B2329-X B2329-X B2329-X B2329-X B2329-X
Zippered 44" long cover encloses
windshield rifle rack and fits M1 Garand rifle
& others; (specify longer if required)
29
FILLER NECK LEATHER PAD: ---- 3C0333 ---- 3C0333 3C0333 ---- ---- ---- ----
Genuine heavy leather pad used 33
around early Dodge gas tank filler necks.
2-PIECE JERRY CAN STRAP KIT with Rivets: B1934 B1934 B1934 B1934 B1934 B1934 C1934 C1934 C1934
Original factory style 2-piece pre-cut 100% cotton straps
rivets directly to can holder B1855.
34
1-PIECE JERRY CAN REPLACEMENT STRAP:
Late field style replacement for factory strap kit. B1934-NC B1934-NC B1934-NC B1934-NC B1934-NC B1934-NC C1934-NC C1934-NC C1934-NC
Wraps around can holder B1855 No riveting needed.
STANDARD WWII ISSUE DOOR SAFETY STRAPS: 2C1935-BF 2C1935-BF VW1935-B VW1935-B VW1935-B VW1935-B ----SAFETY STRAP
---- RELATED----
Adjustable 100% Cotton vehicle (PAIR FOR FRONT DOORS)
doorway safety strap with original WWII cast 2C1935-BR 2C1935-BR MOUNTING HARDWARE:
snap hooks. Typical style issue for almost (PAIR FOR REAR DOORS)
35B B1835 BOLT & SWIVEL
all vehicles in WWII. BRACKET (2 RPV);
B1835-EB DASHBOARD EYE-
EARLY WWII DOOR SAFETY STRAPS: 2C1935-CF 2C1935-CF VW1935-C VW1935-C VW1935-C VW1935-C ---- ----(2 RPV) ----
BOLT
Same as no. B1935-B except has an additional (PAIR FOR FRONT DOORS)
secondary WWII buckle and leather retaining
slides; discontinued early in WWII.
2C1935-CR 2C1935-CR
(PAIR FOR REAR DOORS)
35C
HOOD BUMPERETTE WELT: ---- 3C1738 ---- 3C1738 3C1738 ---- ---- 5E2038 ----
Pre-cut welt for windshield hood
bumperettes; black rivets included.
Genuine leather used for Dodges.
38
BRAKE & CLUTCH LEVER SEALS (Pair): ---- 3C0244 ---- 3C0244 3C0244 ---- ---- ---- HOOK
CAST SNAP ----
Heavy composite floor seals that stop brake USED ON
& clutch pedal arm air leakage through floor
boards.( 1 RPV)
44 SAFETY STRAPS
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-2000 Page 65
ALL TRUCK STRAPS, WELTS, BOOTS, & FASTENERS
Build your custom CANVAS or WEB Product or Acceccesory (in an Array of Colors)
ON-LINE by inserting the Base Part Number below into the "SEARCH FOR" box at www.beachwoodcanvas.com
Otherwise please e-mail, fax or call us for current pricing!
VEHICLE CODES: 1/2T=1/2 TON; 3/4T=3/4 TON; 1-1/2T=1-1/2 TON;
CC=WWII DODGE COMMAND CAR; WC=WWII DODGE WEAPONS CARRIER
SCRIPTION/TRUCK MODEL 1/2TCC 3/4TCC 1/2TWC 3/4TWC 1-1/2TWC CCKW M37 M715 M34/35/135/211
FRONT FENDER WELT KIT: 2C1739-R 3C1739-F 2C1739-R 3C1739-F 3C1739-F 2C1739-R ---- ---- ----
Appropriate diameter single beaded welt
buffering metal to metal contact between fenders
& body.; (1) Kit required per vehicle (1 RPV). 39F
REAR FENDER WELT KIT: 2C1739-R 2C1739-R ---- ---- ---- ---- 2C1739-R ---- ----
Appropriate diameter single beaded welt
buffering metal to metal contact between fenders
& body.; (1) Kit required per vehicle (1 RPV).
39R
INNER WINDSHIELD CANVAS WELT KIT: ---- B2042-C ---- B2042-C B2042-C ---- ---- ---- ----
Pre-cut canvas kit seals (3) edges of inner windshield 42C 42R
to outer windshield frame. IN RUBBER: ---- B2042-R ---- B2042-R B2042-R ---- ---- ---- ----
TAIlGATE/TROOPSEAT CHAIN COVERS (Pair): VC2350 VC2350 VW2350 2A2350 2A2350 CK2350 DG2350 DG2350 CK2350
Heavy duty chain covers prevent your tailgate
or troop seat chains from rattling and
chipping paint. 50
(Specify which chain set)
JERRY CAN NOZZLE SPOUT COVER: B2362 B2362 B2362 B2362 B2362 B2362 B2362 B2362 B2362
Stops spout rattling in tool box & protects
from sand. (Stenciled 'US'). 62 63
G.I. RIFLE MUZZLE COVER: B2363 B2363 B2363 B2363 B2363 B2363 B2363 B2363 B2363
Stenciled US; issued for WWII rifles.
MACHINE GUN PEDESTAL BOOT: B2364 B2364 B2364 B2364 B2364 B2364 B2364 B2364 B2364
Small cover for pedestal opening
when cradle is removed. 64
WINCH COVER: 2C2374 2C2374 2C2374 2C2374 2C2374 CK2374 DG2374 DG2374 R42374
Protects inside of winch drum and cable
between flanges. (Can be stenciled "US")
74
MIRROR COVER: B2375-X B2375-X B2375-X B2375-X B2375-X B2375-X B2375-X B2375-X B2375-X
Rare accessory protects your mirror
and prevents aircraft “glint”. 75
TIRE CHAIN BAG: VC2376 VC2376 VC2376 VC2376 VC2376 VC2376 VC2376 VC2376 VC2376
Rare accessory for carrying tire
chains in your tool box (2 chains per bag) 76
PARTS MANUAL POUCH: B2382 B2382 B2382 B2382 B2382 B2382 B2382 B2382 B2382
Pouch for 8 1/2" x 11" parts manual.
(Actual pouch size 11"x14") 82
MAINTENANCE MANUAL POUCH: B2383 B2383 B2383 B2383 B2383 B2383 B2383 B2383 B2383
Pouch for 8 1/2" x 11" maintenance manual.
(Actual pouch size 8"x11") 83
VEHICLE SIREN COVER: B2385 B2385 B2385 B2385 B2385 B2385 B2385 B2385 B2385
Cover for Federal Signal Model EGH siren.
85 86C
OUTER WINDSHIELD CANVAS WEATHERSTRIP: ---- 3C2086-C ---- 3C2086-C 3C2086-C ---- ---- ----
Original style gasket seals bottom of Dodge
windshield frames to body cowl. IN RUBBER: ---- 3C2086-R ---- 3C2086-R 3C2086-R -- 86R ---- ---
REAR CARGO BED SAFETY STRAP: ---- ---- 2W1990 3W1990 3W1990 3W1990 DG1990 DG1990 3W1990
Large heavy duty 100% Cotton strap with
snap hooks on both ends. 90
COLLAPSIBLE WATER BUCKET: B2395 B2395 B2395 B2395 B2395 B2395 B2395 B2395 B2395
2-gallon reinforced pail as seen on almost every
WWII and many post war military vehicles. 95
COLLAPSIBLE WATER PITCHER (RARE!): B2398 B2398 B2398 B2398 B2398 B2398 B2398 B2398 B2398
Uncommon canvas pitcher stowed in the glove or
tool box; used to fill radiators. Really rare & handy! 98
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 66
GROUP 19 & 23: GMC DUKW COVERS, CUSHIONS, BAGS, & STRAPS
These original-style replica simulated non-functional "life preserver" cushions include features such as the cushion straps stenciled in white
LIFE PRESERVER lettering & GMC or US Government markings as per mil-specs. Read the GPA cushion information below for more details!
ORIGINAL STYLE FUNCTIONAL STYLE
CUSHION SET (4 pieces; equips one DUKW) ............................................DK2301 ........................................................................ DK2301-R
Our beautifully crafted cab and cargo covers with optional detailing are exact duplicates of the original GMC canvas components and
parts. Cargo cover and splash curtain optional features include original style reinforcements, mil-spec black grommets, fasteners, buckles,
issue stenciling, ‘manila’ casing rope, lifeline and tie-down rope web and ring guides, notched hull clearance corners, and surf curtain
rope clearances. Cab top optional features include contoured fit for original ring mount cab bows, roped rear curtain, full reinforcements,
and NOS GMC DUKW windshield zippers. For economy, we also supply the same covers without some options which eliminate un-
necesary lifeline holddowns, web, leather, and zippers, yet overall appearance is maintained.
CAB TOP Assembly with Optional Flaps & Zippers.........DK2309-X
CARGO TARPAULIN with Optional Flaps & Ropes ........ DK2307-X
SPLASH CURTAIN; Rear with Optional Reinforcements ...... DK2313-X
ROPE KIT; Cargo Tarp Tie Down & Life Lines ................ DK1910-R
TOOL BAG mounted in Engine Compartment .................. DK2330
POUCH, DRIVER'S SEAT for Manuals & Documents ..... DK2382
STRAP SET, Boat Hook Tie Down .................................... DK1920-B
STRAP SET, Bildge Pump Tie-Down ................................ DK1920-P
STRAP, Anchor Tie Down .................................................. DK1920-A
STRAP SET, Spotlight Tie Down (You supply hold down ring) ............ DK1920-S
STRAP SET, Pioneer Tool Tie Down ................................. DK1920
STRAP, Jerry Can Strap 2-piece Tie Down (Rivets to holder) ... B1934
STRAP, Jerry Can Strap 1-piece Tie Down (No riveting required) . B1934-NC
COVERS, Headlight (Pair) .................................................2C2326
GROUP 19 & 23: FORD GPA COVERS, CUSHIONS, STRAPS & FASTENERS
Each authentic DELUXE wrapped foam cushion (simulating the old style original "kapok" stuffing) includes such features as black
hardware, life straps stenciled with "LIFE PRESERVER", simulated olive drab leather, original style stitching, and cushion attaching
tabs. (All cushions above can be quoted in genuine olive leather.) Our windshield cover, tonneau cover, dispatch pouch, and splash
curtains spare no detail by using use our mil-spec canvas, heavy zippers, issue FORD MOTOR COMPANY stenciling (where ap-
propriate), and instructions where if needed.
CUSHION SET, Complete DELUXE (Set of 8 cushions) .......................GPA2301
INSTALLATION KIT for the original style seat cushions .......................GPA2303
COVER, COCKPIT Tonneau ...................................................................GPA2309
ROPE KIT for the Tonneau Cover ............................................................GPA2309-R
DISPATCH POUCH, ZIPPERED (Mounted inside cockpit) ...................GPA2311
CURTAINS, SPLASH with optional spring mounting hardware .............GPA2307-X
COVER, WINDSHIELD "FACE" with optional markings & stars .........GPA2314
STRAP SET, Ax & Shovel Tie Down (Pioneer Tools) .............................GPA1920
COVERS, HEADLIGHT (Pair)................................................................B2326-X
WELT KIT, WINDSHIELD Inner Rubber ...............................................B2042-R
WELT KIT, WINDSHIELD Inner Canvas ...............................................B2042-C
WELT KIT, WINDSHIELD Outer Lower Rubber ..................................GPA2086-R
WELT KIT, WINDSHIELD Outer Lower Canvas ...................................GPA2086-C
FASTENER, WINDSHIELD; Original "push button" style (11 required per vehicle) .......B2025-B
FASTENER, SEAT STUD; Original Front Seat Pan Studs (4 required per vehicle) .........GPA1825-S
STRAP, Jerry Can Strap 2-piece Tie Down (Rivets to holder) .........................B1934
STRAP, Jerry Can Strap 1-piece Tie Down (No riveting required) .......................GPA1920
STRAP, Anchor Tie Down ........................................................................GPA1920-A
COVER, MIRROR ...................................................................................B2375-X
BAG, SPARE PARTS ...............................................................................B2327-X
BAG, TOOL..............................................................................................B2328-X
BAG, Tire Chain Bag (2 required per vehicle) .........................................GPA2376
NOTE: THESE RELICA AMPHIBIAN CUSHIONS ACCURATELY DUPLICATE OLD PRESERVER DESIGNS AND ARE
NOT APPROVED FUNCTIONAL PRESERVERS. THEY ARE ONLY INTENDED FOR ANTIQUE AUTO SHOWS ON LAND.
YOU SHOULD CARRY COAST GUARD APPROVED PRESERVERS WHEN ACTUALLY USING YOUR AMPHIBIAN. WE
TAKE NO RESPONSILITY FOR MISUSE OF THESE CUSHIONS AS REAL PRESERVERS.
Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
C ORDER NUMBERS LISTED ABOVE TM10-3000 Page 67
GROUP 19 & 23: HALFTRACK & SCOUT CAR SEAT COVERS, STRAPS, & TOPS
The Beachwood Canvas White M3 or International M5 Halftrack top and the White M3A1 Scout Car tops are exact replicas of
documented original mil-spec issue tops, fully reinforced (where appropriate with leather), and constructed with our popular 20 ounce
olive drab mil-spec canvas. The M3/M5 Halftack top or M3A1 Scout Car top contains such optional original features as a zippered
antennae cap, rear roll-up flap, and side roll-up flaps (M3 or M3A1) or zippered half moon openings (M5). Mil-spec strap and buckle
assemblies (96 total for an M3/M5, and 64 for the M3A1) using original style WWII era buckles secure the top, roll-ups, and panels.
All canvas hardware and buckles are supplied with a military black plated finish. Door curtains are constructed with metal stiffeners and
heavy gauge D.O.T. approved vinyl safety windows. These tops are also offered without certain options in order to reduce the top’s
price for the budget minded. Quotes for M2, M2A1, M3A1, M5A1, or M16 Halftrack tops also available.
STRAPS SETS:
Web Pioneer Tool Straps (set of 3) ............................. VC1920-W..........VC1920-W
Leather Pioneer Tool Straps (set of 3) ........................VC1920-L ...........VC1920-L
Web Camoflauge Net Stowage Straps .........................SC1937-W ..........SC1937-W
Leather Camouflage Net Stowage Straps .................... SC1937-L............SC1937-L
Top Bow Support Straps (TRAILRUN or DELUXE) .SC1917 ...............SC1917 Build your custom
TOP, STRAPS, ACCESSORIES, &
SEAT BOTTOM CUSHIONS with optional zippers & inserts : SEAT COVER or CUSHION SET
(front seats or rear compartment) ................................SC2302-2X .........SC2302-2X ON-LINE by inserting the base part
number listed here into the
SEAT UPPER COVERS (COVER ONLY)*: "SEARCH FOR" box at
Driver or Passenger Seat Upper Cover ........................ SC2302-1X .........SC2302-1X www.beachwoodcanvas.com
Front Jump Seat Upper Cover......................................--------- ................HT2302-1J-X Otherwise please e-mail, fax or call us
Rear Fuel Tank Back Rest Cover .................................--------- ................HT2302-5FT-X for current pricing!
Rear Fuel Tank Back Rest Cushion ............................. --------- ................HT2301-5FT-X
*We will gladly quote prices for recovering your or our plywood backs. Seat cushion and upholstering prices for your particular rear
compartment arrangement, or for additional antennae caps are also available.
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
PAINT, GALLON WWII OD FLAT 319 B2401-1 B2401-1 ---- ---- ---- ---- ---- ---- ----
PAINT, GAL POST-WAR OD SEMI-GLOSS ---- ---- ---- ---- C2401-1 ---- ---- ---- C2401-1
PAINT CHIP, WWII OD FLAT 319 B2401-S B2401-S ---- ---- ---- ---- ---- ---- ----
PAINT CHIP, POST-WAR SEMI-GLOSS ---- ---- ---- ---- C2401-S ---- ---- ---- C2401-S
PAINT, CAN SPRAY OD WW II FLAT 319 B2402-1 B2402-1 ---- ---- ---- ---- ---- ---- ----
PAINT, CAN SPRAY OD SEMI-GLOSS ---- ---- ---- ---- C2402-1 ---- ---- ---- C2402-1
PAINT, CAN SPRAY BLUE DRAB HOOD B2405-1 B2405-1 ---- ---- ---- ---- ---- ---- ----
PAINT, CAN SPRAY WHITE FLAT HOOD B2406-1 B2406-1 ---- ---- B2406-1 ---- ---- ---- B2406-1
PAINT, GALLON PASTURE GREEN~ ---- ---- 2A2401-1PG 2A2401-1PG ---- 2A2401-1PG 2A2401-1PG 2A2401-1PG ----
PAINT, GALLON HARVEST TAN~ ---- ---- 2A2401-1HT 2A2401-1HT ---- 2A2401-1HT 2A2401-1HT 2A2401-1HT ----
PAINT, GALLON HARVARD RED~ ---- ---- 2A2401-1HR 2A2401-1HR ---- 2A2401-1HR 2A2401-1HR 2A2401-1HR ----
PAINT, GALLON AUTUMN YELLOW~ ---- ---- 2A2401-1AY 2A2401-1AY ---- 2A2401-1AY 2A2401-1AY 2A2401-1AY ----
PAINT, GALLON EMERALD GREEN~ ---- ---- 2A2401-1EG 2A2401-1EG ---- 2A2401-1EG 2A2401-1EG 2A2401-1EG ----
PAINT, GALLON RIM COLOR SUNSET RED~ ---- ---- 2A2401-1SR 2A2401-1SR ---- 2A2401-1SR 2A2401-1SR 2A2401-1SR ----
PAINT, GALLON RIM COLOR WAKE IVORY~ ---- ---- 2A2401-1WI 2A2401-1WI ---- 2A2401-1WI 2A2401-1WI 2A2401-1WI ----
PAINT, GALLON MICHIGAN YELLOW~ ---- ---- 2A2401-1MY 2A2401-1MY ---- 2A2401-1MY 2A2401-1MY 2A2401-1MY ----
PAINT, GALLON BLACK FRAME, OR RIM~ ---- ---- 2A2401-1BK 2A2401-1BK ---- 2A2401-1BK 2A2401-1BK 2A2401-1BK ----
PAINT, GALLON NORMANDY BLUE~ ---- ---- 2A2401-1NB 2A2401-1NB ---- 2A2401-1NB 2A2401-1NB 2A2401-1NB ----
PAINT, GALLON LUZON RED~ ---- ---- 2A2401-1LR 2A2401-1LR ---- 2A2401-1LR 2A2401-1LR 2A2401-1LR ----
PAINT, GALLON PICKET GREY~ ---- ---- 2A2401-1GR 2A2401-1GR ---- 2A2401-1GR 2A2401-1GR 2A2401-1GR ----
PAINT, GALLON POTOMAC GREY~ ---- ---- 2A24011POT2A24011POT ---- 2A24011POT 2A24011POT 2A24011POT ----
DECAL, STAR BODY 6" ---- ---- ---- ---- C2407-6 ---- ---- ---- C2407-6
DECAL, STAR DOOR OR HOOD 16" ---- ---- ---- ---- C2407-16 ---- ---- ---- C2407-16
DECAL, STAR HOOD 20" ---- ---- ---- ---- C2407-20 ---- ---- ---- C2407-20
DECAL, "TP25" FENDER 1" ---- ---- ---- ---- C2408-25 ---- ---- ---- C2408-25
DECAL, "TP35" FENDER 1" ---- ---- ---- ---- C2408-35 ---- ---- ---- C2408-35
DECAL, "TP45" FENDER 1" ---- ---- ---- ---- C2408-45 ---- ---- ---- C2408-45
DECAL, "TP55" FENDER 1" ---- ---- ---- ---- C2408-55 ---- ---- ---- C2408-55
STENCIL KIT, COMPLETE FOR JEEP B2409 B2409 B2409 B2409 B2409 B2409 B2409 B2409 B2409
STENCIL, BLANK OIL BOARD 5"x20" B2409-5 B2409-5 B2409-5 B2409-5 B2409-5 B2409-5 B2409-5 B2409-5 B2409-5
STENCIL, BLANK OIL BOARD 7"x20" B2409-7 B2409-7 B2409-7 B2409-7 B2409-7 B2409-7 B2409-7 B2409-7 B2409-7
STENCIL,TAILGATE"FOUR WHEEL DRIVE" ---- ---- 2A2410 2A2410 ---- 3B2410 3B2410 3B2410 ----
STENCIL, STAR 2-1/4" WITH 3-1/2" CIRCLE* B2411-3 B2411-3 ---- ---- B2411-3 ---- ---- ---- B2411-3
STENCIL, STAR 4" WITH 6" CIRCLE* B2411-4 B2411-4 ---- ---- B2411-4 ---- ---- ---- B2411-4
STENCIL, STAR 6" WITH 9-1/2" CIRCLE* B2411-6 B2411-6 ---- B2411-6 ---- B2411-6
STENCIL, STAR 10" WITH 15" CIRCLE* B2411-10 B2411-10 ---- B2411-10 ---- B2411-10
STENCIL, STAR 12" WITH 18" CIRCLE* B2411-12 B2411-12 ---- B2411-12 ---- B2411-12
STENCIL, STAR 15" WITH 20" CIRCLE* B2411-15 B2411-15 ---- B2411-15 ---- B2411-15
STENCIL, STAR 20" WITH 30" CIRCLE* B2411-20 B2411-20 ---- B2411-20 ---- B2411-20
STENCIL, STAR 25" WITH 36" CIRCLE* B2411-25 B2411-25 ---- 3B2410 B2411-25 ---- B2411-25
STENCIL, STAR 36" WITHOUT CIRCLE B2411-36 B2411-36 ---- B2411-36 ---- B2411-36
STENCIL, "TP25" FENDER 1" B2413-25 B2413-25 ---- ---- B2413-25 ---- B2413-25
STENCIL, "TP35" FENDER 1" B2413-35 B2413-35 ---- ---- B2413-35 ---- ---- B2413-35
STENCIL, "TP45" FENDER 1" B2413-45 B2413-45 ---- ---- B2413-45 ---- ---- ---- B2413-45
STENCIL, "TP55" FENDER 1" B2413-55 B2413-55 ---- ---- B2413-55 ---- ---- ---- B2413-55
STENCIL PACK, ALPHA-NUMERIC 3/4" B2414-3/4 B2414-3/4 ---- ---- B2414-3/4 ---- ---- B2414-3/4
STENCIL PACK, ALPHA-NUMERIC 1" B2414-1 B2414-1 ---- ---- B2414-1 STAR & INVASION CIRCLE B2414-1
STENCIL PACK, ALPHA-NUMERIC 2" B2414-2 B2414-2 ---- ---- B2414-2 ---- ---- B2414-2
STENCIL PACK, ALPHA-NUMERIC 3" B2414-3 B2414-3 ---- 2A2410---- B2414-3 B2414-3
STENCIL PACK, ALPHA-NUMERIC 4" B2414-4 B2414-4 ---- ---- B2414-4 B2414-4
STENCIL PACK, ALPHA-NUMERIC 5" B2414-5 B2414-5 ---- ---- B2414-5 B2414-5
STENCIL, FUEL "CAUTION" BODY SIDE ---- ---- ---- ---- C2415 ---- ---- ---- C2415
STENCIL, "SECURE HOOD ON SERVICE" ---- ---- ---- ---- ---- ---- D2412
STENCIL, "MAX POST SPEED 35 MPH" B2416-35 B2416-35 ---- ---- B2416-35 ---- B2416-35
DECAL, US ARMY LEGEND 2" ---- ---- ---- ---- C2417-2 C2417-2
DECAL, US ARMY LEGEND 3" ---- ---- ---- ---- C2417-3 C2417-3
DECAL, EACH NUMERIC 1" SPECIFY 0-9 ---- ---- ---- ---- C2418 C2418
DECAL, EACH ALPHA 1"; SPECIFY A-Z ---- ---- ---- ---- C2418 ---- C2418
DECAL, EACH NUMERIC 2" SPECIFY 0-9 ---- ---- ---- ---- C2419 ---- ---- ---- C2419
DECAL, EACH ALPHA 2"; SPECIFY A-Z ---- ---- ---- ---- C2419 ---- ---- ---- C2419
DECAL, EACH NUMERIC 3" SPECIFY 0-9 ---- ---- ---- ---- C2420 ---- ---- ---- C2420
DECAL, EACH ALPHA 3"; SPECIFY A-Z ---- ---- ----STAR ONLY
---- C2420 ---- ---- ---- C2420
~ THESE PAINTS ARE NORMALLY SOLD IN GALLONS BUT ARE ALSO AVAILABLE IN QUARTS. PAINT CHIPS ARE NOT AVAILABLE AT THIS TIME.
* THESE STENCILS COME WITH A STAR & "BROKEN" INVASION CIRCLE. IF YOU NEED A PLAIN STAR, JUST CUT OR MASK OFF THE CIRCLE PART.
GALLONS OF PAINT ARE CONSIDERED HAZARDOUS BY CARRIERS AND WILL INCUR AN EXTRA FEE TO
SHIP BY GROUND IN THE CONTINENTAL UNITED STATES. SPRAY CANS ARE NOT CONSIDERED HAZARDOUS AND DO NOT
INCUR THE FEE. ANY PAINT LISTED ABOVE CANNOT BE SHIPPED BY AIR DOMESTICALLY OR OUT OF THE USA.
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 69
GROUP 24: PAINT, STENCILS, DECALS, DATA PLATES
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
PAINT,CAN SPRY MARINE HOOD YELLOW B2422-1 B2422-1 B2422-1 B2422-1 B2422-1 B2422-1 B2422-1 B2422-1 B2422-1
PAINT, CAN SPRAY WRINKLE BLACK B2423-1 B2423-1 B2423-1 B2423-1 B2423-1 B2423-1 B2423-1 B2423-1 B2423-1
PAINT, CAN SPRAY MARINE CORPS GRN B2424-1 B2424-1 ---- ---- B2424-1 ---- ---- ---- B2424-1
PAINT, CAN GAL MARINE CORPS GRN B2425-1 B2425-1 ---- ---- B2425-1 ---- ---- ---- B2425-1
PAINT, CAN SPRAY FORD ENGINE GREY ---- G2429-1 ---- ---- ---- ---- ---- ---- ----
DATA PLATE, IGNITION ---- ---- ---- ---- C2430-IGN ---- ---- ---- C2430-IGN
DATA PLATE, FORDING CONTROL ---- ---- ---- ---- C2430-F ---- ---- ---- C2430-F
DATA PLATE SET ---- ---- ---- ---- C2430-N ---- ---- ---- D2430
DATA PLATE SET, '41-42 BRASS 3 PCS B2430-41 G2430-42 ---- ---- ---- ---- ---- ---- ----
DATA PLATE SET, 1942 ALUM 3 PCS B2430-42 G2430-43A ---- ---- ---- ---- ---- ----
DATA PLATE SET, 1943 BRASS 3 PCS ---- G2430-43B ---- ---- ---- ---- ---- ---- ----
DATA PLATE SET, 1943 ALUM 3 PCS B2430-43 G2430-43A ---- ---- ---- ---- ---- ---- ----
DATA PLATE SET, '44-45 ALUM 4 PCS B2430-44* G2430-44* ---- ---- ---- ---- ---- ---- ----
DATA PLATE SET, 1945 ALUM 4 PCS B2430-45* G2430-44* ---- ---- ---- ---- ---- ---- ----
DATA PLATE, SHIPPING INFORMATION B2430-44S G2430-44S ---- ---- ---- ---- ---- ---- ----
DIE STAMP SET, ALPH-NUMERIC 1/8" DATA PLATES B2430-DS8 B2430-DS8 B2430-DS8 B2430-DS8 B2430-DS8 B2430-DS8 B2430-DS8 B2430-DS8 B2430-DS8
DIE STAMP SET, ALPH-NUMERIC 1/4" ENGINE BLOCK B2430-DS4 B2430-DS4 B2430-DS4 B2430-DS4 B2430-DS4 B2430-DS4 B2430-DS4 B2430-DS4 B2430-DS4
DIE STAMP SET, ALPH-NUMERIC 1/4" FRAMEDIRECT ---- B2430-DS4 ---- ---- ---- ---- ---- ---- ----
DATA PLATES,EARLY '45-46 CJ2A "JEEP" ---- ---- 2A2430-EJ ---- ---- ---- ---- ---- ----
DATA PLATES,EARLY '45-46 CJ2A "WILLYS"---- ---- 2A2430-EW ---- ---- ---- ---- ---- ----
DATA PLATE, LONG LATE DASH 1947-49 ---- ---- 2A2430-L 2A2430-L ---- 2A2430-L 2A2430-L 2A2430-L ----
DATA PLATE, BANTAM TRAILER BT3 BT2430 BT2430 BT2430 BT2430 BT2430 BT2430 BT2430 BT2430 BT2430
DATA PLATE, WILLYS TRAILER MBT MBT2430 MBT2430 MBT2430 MBT2430 MBT2430 MBT2430 MBT2430 MBT2430 MBT2430
DATA PLATE, M100 TRAILER 1/4 TON 1002430 1002430 1002430 1002430 1002430 1002430 1002430 1002430 1002430
DATE PLATE, M416 TRAILER 1/4 TON 4162430 4162430 4162430 4162430 4162430 4162430 4162430 4162430 4162430
DATA PLATE, ROTARY LITE SW ALUM B2431-A B2431-A ---- ---- ---- ---- ---- ---- ----
DATA PLATE, ROTARY LITE SW BRASS B2431-B B2431-B ---- ---- ---- ---- ---- ---- ----
DATA PLATE, FILTERETTE RADIO B2432 G2432 ---- ---- ---- ---- ---- ---- ----
DATA PLATE, WILLY’S PATENT ---- ---- 2A2433 2A2433 C2433 2A2433 2A2433 2A2433 D2433
DATA PLATE, WINCH CAUTION ALUM B2434-A B2434-A ---- ---- ---- ---- ---- ---- ----
DATE PLATE, WINCH CAUTION BRASS B2434-B B2434-B ---- ---- ---- ---- ---- ---- ----
DATA PLATE, TANDEM HITCH ALUM B2435-A B2435-A B2435-A B2435-A B2435-A B2435-A B2435-A B2435-A B2435-A
DATA PLATE, TANDEM HITCH BRASS B2435-B B2435-B B2435-B B2435-B B2435-B B2435-B B2435-B B2435-B B2435-B
DATA PLATE, STARTER 6V OR 12V B2436 B2436 B2436 B2436 ---- B2436 B2436 B2436 ----
DATA PLATE, GENERATOR 6V B2437-6 B2437-6 B2437-6 B2437-6 ---- B2437-6 B2437-6 B2437-6 ----
DATA PLATE, GENERATOR 12V B2437-12 B2437-12 B2437-12 B2437-12 ---- B2437-12 B2437-12 B2437-12 ----
DATA PLATE, REGULATOR VOLTAGE 6V B2438-6 B2438-6 B2438-6 B2438-6 ---- B2438-6 B2438-6 B2438-6 ----
DATA PLATE, REGULATOR VOLTAGE 12V B2438-12 B2438-12 B2438-12 B2438-12 ---- B2438-12 B2438-12 B2438-12 ----
DATA PLATE, COMBAT RIM WARNING B1313-W B1313-W ---- ---- ---- ---- ---- ---- ----
DATA PLATE, FRAME EARLY B2439-E ---- ---- ---- ---- ---- ---- ---- ----
DATA PLATE, FRAME LATE B2439-L ---- 2A2439 3A2439 ---- 3A2439 3A2439 3A2439 ----
PAINT, GALLON DESERT CAMO SAND B2450-1 B2450-1 B2450-1 B2450-1 B2450-1 B2450-1 B2450-1 B2450-1 B2450-1
PAINT, SPRAYCAN DESERT CAMO SAND B2451-1 B2451-1 B2451-1 B2451-1 B2451-1 B2451-1 B2451-1 B2451-1 B2451-1
PAINT,GAL DESERTCAMO EARTHBROWN B2452-1 B2452-1 B2452-1 B2452-1 B2452-1 B2452-1 B2452-1 B2452-1 B2452-1
PAINT,SPRAYCAN CAMO EARTH BROWN B2453-1 B2453-1 B2453-1 B2453-1 B2453-1 B2453-1 B2453-1 B2453-1 B2453-1
PAINT, GAL WOODSCAMO LIGHTGREEN B2454-1 B2454-1 B2454-1 B2454-1 B2454-1 B2454-1 B2454-1 B2454-1 B2454-1
PAINT, SPRAYCAN CAMO LIGHT GREEN B2455-1 B2455-1 B2455-1 B2455-1 B2455-1 B2455-1 B2455-1 B2455-1 B2455-1
PAINT, GAL DESERT&WOODCAMO BLACK B2462-1 B2462-1 B2462-1 B2462-1 B2462-1 B2462-1 B2462-1 B2462-1 B2462-1
PAINT, SPRAYCAN CAMO BLACK B2463-1 B2463-1 B2463-1 B2463-1 B2463-1 B2463-1 B2463-1 B2463-1 B2463-1
PAINT, GAL WOODSCAMO DARK GREEN B2464-1 B2464-1 B2464-1 B2464-1 B2464-1 B2464-1 B2464-1 B2464-1 B245641
PAINT, SPRAYCAN CAMO DARK GREEN B2465-1 B2465-1 B2465-1 B2465-1 B2465-1 B2465-1 B2465-1 B2465-1 B2465-1
PAINT,GAL WOODSCAMO FORESTGREEN B2468-1 B2468-1 B2468-1 B2468-1 B2468-1 B2468-1 B2468-1 B2468-1 B2468-1
PAINT,SPRAYCAN CAMO FOREST GREEN B2469-1 B2469-1 B2469-1 B2469-1 B2469-1 B2469-1 B2469-1 B2469-1 B2469-1
STENCIL, OVERSEAS SHIPPING INFO B2440 B2440 ---- ---- ---- ---- ---- ---- ----
STENCIL, "PRESTONE 43" B2441-43 B2441-43 ---- ---- B2441-43 ---- ---- ---- B2441-43
STENCIL, "PRESTONE 44" B2441-44 B2441-44 ---- ---- B2441-44 ---- ---- ---- B2441-44
DATA PLATE, DISTRIBUTOR B2442 B2442 B2442 B2442 ---- B2442 B2442 B2442 ----
DECALS, (ALL)OIL,FUEL,A-C, ETC.(FRAM) B2456-F G2456-F 2A2456-F 2A2456-F C2456-F 3B2456-F 3B2456-F 3B2456-F D2456-F
DECALS, (ALL)OIL,FUEL,A-C, ETC.(PURO) B2456-P G2456-P 2A2456-P 2A2456-P C2456-P 3B2456-P 3B2456-P 3B2456-P D2456-P
DECAL, GOOD DRIVER (DASH BOARD) ---- ---- ---- ---- C2456-GD ---- ---- ---- C2456-GD
DECAL, CADUSEUS MED. AMBULANCE~ ---- ---- ---- ---- ---- ---- ---- ---- D2457~
DECAL FOR AIR CLEANER B0313 (OAKES) ---- ---- 2A2456-AC 2A2456-AC ---- ---- ---- ---- ----
DECAL SHIFT PATTERN ON DASHBOARD ---- ---- ---- ---- --- ---- 5L2456-ST 5L2456-ST ----
PAINT, GAL NAVY GREY B2460-1 B2460-1 B2460-1 B2460-1 B2460-1 B2460-1 B2460-1 B2460-1 B2460-1
PAINT, CAN SPRAY NAVY GREY B2461-1 B2461-1 B2461-1 B2461-1 B2461-1 B2461-1 B2461-1 B2461-1 B2461-1
DATA PLATE TO DASH INSTALLATION KIT B2470 G2470 2A2470 2A2470 C2470 2A2470 2A2470 2A2470 C2470
INSTALLATION KIT FOR 2A2403-EW & EJ ---- ---- B2470 ---- ---- ---- ---- ---- ----
DATA PLATE, BODY IDENTIFICATION ---- ---- 2A2430-BDY ---- ---- ---- ---- ---- ----
STENCIL, RAISED "WILLYS" HOOD OR TAILGATE MASK ---- 2A2471 2A2471 ----- 2A2471 2A2471 2A2471 ----
STENCIL, RAISED "WILLYS" GRILL MASK ---- ---- ----- ------ ---- 3B2472 ---- ---- ----
SPRAY, STENCIL OVERSPRAY TACKDOWN B2458-1 B2458-1 B2458-1 B2458-1 B2458-1 B2458-1 B2458-1 B2458-1 B2458-1
~ ALSO USED ON M170, M718, M725, M43, AND OTHER AMBULANCES. *THESE SETS INCLUDE EITHER B2430-44S OR G2430-44S
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 70
GROUP 25: GIFT SHOP
PART DESCRIPTION MB GPW CJ2A CJ3A M38 CJ3B CJ5 CJ6 M38A1
MANUALS, MAINTENANCE COMPLETE B2601* B2601* 2A2601 2A2601 C2601* 2A2601 2A2601 2A2601 D2601*
MANUAL, PARTS B2602-45^ B2602-45^ 2A2602 2A2602 C2602 3B2602 3B2602-U 3B2602-U D2602
MANUAL, PARTS (1949 UPDATED VERSION) B2602-49 B2602-49 ---- ---- ---- ---- ---- ---- ----
MANUAL, OPERATIONS MANUAL B2603 B2603 2A2603 ---- ---- ---- ---- ---- ----
MANUAL, MASTER PARTS B2605** G2605** 2A2602 2A2602 ---- 3B2602-U 3B2602-U 3B2602-U ----
MANUALS, MARKING OF VEHICLES B2640~ B2640~ ---- ---- B2640~ ---- ---- ---- B2640
PICTURES, SESSIONS PAINTINGS B2632@ B2632@ B2632@ B2632@ B2632@ B2632@ B2632@ B2632@ B2632@
BOOK, ALL AMERICAN WONDER VOL.I B2638+ B2638+ ---- ---- ---- ---- ---- ---- ----
BOOK, ALL AMERICAN WONDER VOL.II B2638-2+ B2638-2+ ---- ---- ---- ---- ---- ---- ----
BOOK, ALL AMERICAN WONDER VOL.III B2638-3+ B2638-3+ ---- ---- ---- ---- ---- ---- ----
BOOK, SELLING THE AAW (ORIGINAL ADS) B2638-SELL+ B2638-SELL+ ---- ---- ---- ---- ---- ---- ----
POSTER, AMERICAN LEGEND B2643 B2643 B2643 B2643 B2643 B2643 B2643 B2643 B2643
CATALOG & PRICES, CANVAS & PARTS TM10-3000 TM10-3000 TM10-3000 TM10-3000 TM10-3000 TM10-3000 TM10-3000 TM10-3000 TM10-3000
~ B2640 IS A MULTI-MANUAL COMPILATION OF ORIGINAL REPRODUCTIONS OF MARKING MANUALS FROM 1942 TO 1964. INCLUDES DRAWINGS & EXAMPLES OF HOW TO
MARK VEHICLES WITH ORIGINAL UNIT & NATIONAL MARKINGS.
* THESE MANUALS ARE INEXPENSIVE LARGE MULTI-MANUAL SOFT COVER COMPILATIONS OF ALL STANDARD WAR MANUALS INCLUDING: MAINTENANCE, ENGINE &
CLUTCH, POWERTRAIN, BODY, FRAME, & CHANGE ORDERS INTENDED FOR YOUR USE AS A SHOP MANUAL THAT YOU DO NOT HAVE TO WORRY ABOUT GETTING DIRTY!
** B2605 COMPLETE CROSS REFERENCE OF MA, MB, 1/4 TON TRAILERS. G2605 IS A COMPLETE CROSS REFERENCE OF ALL FORD COMPONENTS.
@ PRINTS OF ORIGINAL SESSIONS PAINTINGS OF MB/GPW JEEPS USED IN LIFE MAGAZINE ADVERTISEMENTS DURING WWII.
+ USEFUL GUIDE TO RESTORATION OF MB & GPW JEEP
B2502 ^ PARTS LISTING UP TO 1945,ORD9-SNLG503
7 Inch
Diameter B2643
WWII Metal
Bridge B2399
Plates!
Aluminum
Silhouette Road
Crossing Signs
for Your Favorite
B2115 Vehicle!
C Copyright 2009 Beachwood Canvas Works Island Heights, N.J. 08732-0137 All Rights Reserved
ORDER NUMBERS LISTED ABOVE TM10-3000 Page 71
BEACHWOOD CANVAS WORKS BULK MAIL
ANTIQUE MILITARY & OFF ROAD VEHICLE SPECIALISTS PERMIT NO.
39 LAKE AVENUE P.O. BOX 137 97 PAID
ISLAND HEIGHTS, NEW JERSEY U.S.A. 08732-0137 ISLAND
PHONE: (732)-929-3168 FAX: (732)-929-3479 HEIGHTS, NJ
R 08732-0137
WE ARE YOUR ONLY CANVAS SOURCE CERTIFIED AS AN APPROVED CONTRACTOR FOR THE
US GOVERNMENT DEPARTMENT OF DEFENSE!
WE CAN'T LIST IT ALL IN THIS GUIDE, SO IF YOU NEED CANVAS FOR :
M20 BSA , WLA & WLC MOTORCYCLE; M422 & M422A1 MIGHTY MITE JEEP; FERRET SCOUT CAR; M170 , M718,
WC54, M725, & M43 AMBULANCES; M42 COMMAND VERSION OF THE M37; FORD GTB BOMB & CARGO TRUCKS;
M29 & M29C WEASELS; M3 & M5 STUART, AND OTHER TANKS; M8 & M20 ARMOURED CARS., FORD GP, BANTAM
BRC, WILLYS MA, CROSLEY PUP, & MORE!.........
WE WILL BE PLEASED TO PROVIDE SEPARATE QUOTES OR INFORMATION!