LAB 1 REPORT-ver2
LAB 1 REPORT-ver2
c LOGO
Date:
c
GROUP LOGO
GROUP MEMBERS:
Centre of Studies
Computer Technology and Networking (CTN) ~0~ UiTM
GROUP LAB 1: UTP CABLE CONSTRUCTION & PROCEDURES Prepared By:
c LOGO
Date:
c
TABLE OF CONTENTS
Introduction ......................................................................................................................................................... 2
Objectives ........................................................................................................................................................ 2
Twisted Pair...................................................................................................................................................... 2
Cross-over Cable............................................................................................................................................... 2
Rollover Cable.................................................................................................................................................. 3
Conclusion ........................................................................................................................................................... 3
References ............................................................................................................................................................ 3
Appendix ............................................................................................................................................................. 3c
Centre of Studies
Computer Technology and Networking (CTN) ~1~ UiTM
GROUP LAB 1: UTP CABLE CONSTRUCTION & PROCEDURES Prepared By:
c LOGO
Date:
c
INTRODUCTION
Objectives
Twisted Pair
Introduction ² explain concept (use your own words- cannot copy ²paste technique) ² one paragraph only
Cross-Over Cable
Provide the colour configuration
Function
Advantage/disadvantage
Cross-over Cable
Intro
Procedure/steps ² provide screen shot and logical design
Centre of Studies
Computer Technology and Networking (CTN) ~2~ UiTM
GROUP LAB 1: UTP CABLE CONSTRUCTION & PROCEDURES Prepared By:
c LOGO
Date:
c
Rollover Cable
Intro
Procedure/steps ² provide screen shot and logical design
Discuss
CONCLUSION
REFERENCES
APPENDIX
Centre of Studies
Computer Technology and Networking (CTN) ~3~ UiTM