The SPAWXP4 antenna is a cross polarized four bay antenna designed for the 410-470 MHz frequency band. It delivers high performance in a narrow housing to reduce visual and wind impacts. The antenna consists of cross polarized dipole arrays mounted on an aluminum reflector and covered by a UV resistant radome. It has electrical and mechanical downtilt options and is designed for 250 watts of power.
The SPAWXP4 antenna is a cross polarized four bay antenna designed for the 410-470 MHz frequency band. It delivers high performance in a narrow housing to reduce visual and wind impacts. The antenna consists of cross polarized dipole arrays mounted on an aluminum reflector and covered by a UV resistant radome. It has electrical and mechanical downtilt options and is designed for 250 watts of power.
The SPAWXP4 antenna is a cross polarized four bay antenna designed for the 410-470 MHz frequency band. It delivers high performance in a narrow housing to reduce visual and wind impacts. The antenna consists of cross polarized dipole arrays mounted on an aluminum reflector and covered by a UV resistant radome. It has electrical and mechanical downtilt options and is designed for 250 watts of power.
The SPAWXP4 antenna is a cross polarized four bay antenna designed for the 410-470 MHz frequency band. It delivers high performance in a narrow housing to reduce visual and wind impacts. The antenna consists of cross polarized dipole arrays mounted on an aluminum reflector and covered by a UV resistant radome. It has electrical and mechanical downtilt options and is designed for 250 watts of power.
The SPAWXP4 antenna is a cross polarised four bay antenna
designed to facilitate system designers that have frequencies allocated in the 410-430 MHz and 450-470 MHz frequency bands. This four bay antenna delivers exceptional performance in a slim and narrow housing, reducing visual impact and windloading, thereby assisting the site acquisition process. The antenna consists of full wave dipole arrays cross polarised at +/-45º mounted on a passivated aluminium reflector and covered with a UV resistant ABS radome.
ELECTRICAL SPECIFICATIONS SPAWXP445065
Frequency Range 410-470 MHz Bandwidth 60 MHz Gain 12 dBd (14.2dBi) VSWR 1.5:1 Typical Polarisation ±45° Front to Back Ratio; >-20dB Cross Polar Discrimination >20db -3dB Horizontal Beamwidth: 65° -3dB Vertical Beamwidth: 18° Isolation between ports 25-28dB Fixed Electrical Downtilt 0°, 8° & 12° Options Impedance 50 Ω Power Rating 250 watts MECHANICAL SPECIFICATIONS Lightning Protection DC Ground Connector(s) 2 x 7/16 DIN Dimensions (LxWxD)mm 1920 x 400 x 180 Rated Wind Velocity 150Km/hr Lateral Thrust at Rated Wind Front: 1010N (103Kg) Velocity Rear: 1230N (125Kg) Side: 480n ( 49KG) Mounting: Clamp Kit 9640587: Mounts to Round Pole (19-115mm) Order Separately Tilt Clamp Kit 9640588: Mechanical downtilt (0-15° adjustable) MATERIALS: Radiating Elements Copper on Glass-reinforced substrate Radome UV Resistant ABS Reflector Aluminium Alloy