Scribd
Upload
733 views4 pages

M4000 Configuration protocolWB Infeed

This document contains the configuration settings for an M4000 multiple light beam safety device from July 25, 2009. It lists the version information, general device details like serial number and number of beams, and settings for the system configuration, sensor configuration, muting configuration, and input/output configuration. The configuration includes settings for the status, scanning range, display rotation, application diagnostic output, external device monitoring, restart interlock, and reset button functionality.

Uploaded by

Sebastian Sisca
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
733 views4 pages

M4000 Configuration protocolWB Infeed

This document contains the configuration settings for an M4000 multiple light beam safety device from July 25, 2009. It lists the version information, general device details like serial number and number of beams, and settings for the system configuration, sensor configuration, muting configuration, and input/output configuration. The configuration includes settings for the status, scanning range, display rotation, application diagnostic output, external device monitoring, restart interlock, and reset button functionality.

Uploaded by

Sebastian Sisca
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

SICK Configuration & Diagnostic

Software

M4000 Configuration protocol (Connection)


SICK Configuration & Diagnostic Software

Contents

1. Configuration protocol M4000 Advanced (receiver) from 7/25/2009 / 16:51........................ 3


1.1. Version information......................................................................................................................... 3

1.2. General information........................................................................................................................ 3

1.3. System configuration...................................................................................................................... 3

1.4. Sensor Configuration...................................................................................................................... 4

1.5. Muting configuration....................................................................................................................... 4

1.6. Partial blanking active..................................................................................................................... 4

1.7. I/O configuration............................................................................................................................. 4

Page 2
SICK Configuration & Diagnostic Software

1. Configuration protocol M4000 Advanced (receiver) from


7/25/2009 / 16:51

M4000 multiple light beam safety device

1.1. Version information


Version number CDS 3.5.2.24
M4000 Software version DLL 3.5.2.23
M4000 Software version LCK 3.5.2.2
Version number device interface 00.20
Sensor software version 01.20

1.2. General information


Sensor type M40E-034023RB0
Serial number 09060416
Electronics card number 09050000-010004
User group Authorised client

Number of beams 3 beams


Beam separation 400 mm

Application name Safety Solution


Configuration date 25.07.2009 / 16:50
Configuration created with CDS version 3.5.2

1.3. System configuration


Status in testing
System position Standalone
Other systems No guests
Beam coding Non-coded
Scanning range Low scanning range
Rotation of the 7segment display Rotated 0°
Assignment Application diagnostic output Contamination (HIGH active)
External device monitoring Active
Restart interlock Internal
Reset button Active
Connection of the reset button on ... M4000
Reset performed immediately after ... Press and release
System response time 10 ms

Page 3
SICK Configuration & Diagnostic Software

1.4. Sensor Configuration


Activated sensors A1, A2, B1 ,B2
Sensor test Inactive
Sensor gap monitoring Active
Filter time for the sensor monitoring 250 ms
Concurrence monitoring Inactive

1.5. Muting configuration


Monitoring of the total muting time Active
Configured time [s] 80 s
End of muting After muting sensor unoccupied
Muting lamp not connected
Override control Inactive
Direction detection Inactive
Sequence monitoring Inactive
Direction Without

1.6. Partial blanking active


Partial blanking active Inactive

1.7. I/O configuration


Muting on C1 Inactive
Changeover Muting/Partial blanking Inactive
Belt stop function Inactive

Page 4

You might also like