Scribd
Upload
1K views2 pages

Quality Assurance Incoming Raw Materials Inspection Plan

This quality plan outlines the inspection of incoming raw materials. It lists 12 raw materials including cold rolled steel, silicon steel, magnet wire, and others. For each material, it specifies the characteristics to be controlled such as thickness and width. It describes the sample size, inspection frequency, test equipment, and responsible person for each material. The objective is to ensure all incoming raw materials meet quality standards.

Uploaded by

Alvin Noda
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
1K views2 pages

Quality Assurance Incoming Raw Materials Inspection Plan

This quality plan outlines the inspection of incoming raw materials. It lists 12 raw materials including cold rolled steel, silicon steel, magnet wire, and others. For each material, it specifies the characteristics to be controlled such as thickness and width. It describes the sample size, inspection frequency, test equipment, and responsible person for each material. The objective is to ensure all incoming raw materials meet quality standards.

Uploaded by

Alvin Noda
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Department:

Quality Assurance Quality Plan


Title: Revision : Date: Page:
Incoming Raw Materials Inspection Plan Ø 3/3/2010 1 of 2

Characteristic to be Reference Responsible


Raw Material Sample Size Frequency Test Equipment Record/Form
controlled Procedure Person
1. CRS  Thickness  1 Roll  Every  Vernier
Cold  Width Every Delivery Caliper 0-
Rolled Package 150 mm.
Steel
2. Silicon  Thickness  1 Roll  Every  Vernier
Steel  Width Every Delivery Caliper 0-
Package 150 mm.
3. Magnet  Insulation  1 Spool  Every  Insulation
Wire Thickness Every Delivery Breakdown
 Diameter of Dimension Tester
copper  Micrometer
Caliper 0-
25 mm.
4. Brass  Thickness  1 Roll  Every  Vernier
Strip  Width Every Delivery Caliper 0-
Package 150 mm.
5. Plastic  Dimensions  5 Pieces  Every  Vernier
Parts Every Delivery Caliper 0-
e.g. Batch 150 mm.
(Front  Needle
Piece, Flame Test
End Equipment
Piece,
Terminal
Block)
6. Mylar  Thickness  1 Roll  Every  Vernier
Sheet  Width Every Delivery Caliper 0-
Package 150 mm.
7. PE Tape  Width  1 Roll  Every  Vernier
Delivery Caliper 0-
150 mm.

Reviewed by: QMR Approved by: Quality Assurance Noted by: Plant Manager Document:
Alvin B. Noda Albert A. Tulabut Jim A. Tan QP-01
Department:
Quality Assurance Quality Plan
Title: Revision : Date: Page:
Incoming Raw Materials Inspection Plan Ø 3/3/2010 2 of 2

Characteristic to be Reference Responsible


Raw Material Sample Size Frequency Test Equipment Record/Form
controlled Procedure Person
8. Impregna  Viscosity  1 Set  Every  Ford
tion Paint Delivery Measuring
Cup
9.    

10. Crimp    
Terminal

11. Stamping    
Oil

12. Printing    
Ink

Reviewed by: QMR Approved by: Quality Assurance Noted by: Plant Manager Document:
Alvin B. Noda Albert A. Tulabut Jim A. Tan QP-01

You might also like