Arduino 7-Segment Shields
Arduino 7-Segment Shields
Overview
The 7‐Segments shield is developed for Arduino compatible boards, to provide a user‐friendly
interface that allows users to go through the menu, make selections etc.
It consists of a 4 Digit 7‐Segments (Single pin Serial Interface 9600bps), Analog Pushbuttons
Switch 5 that form a joystick‐style keypad, LED 3 bit User define, DS1307 Real Time Clock, 24L128
EEPROM, TMP75 Digital Temperature sensor all onboard.
For test and develop basic microcontroller in peripheral device interfaces.
Arduino
Features Summary
Display 4 Digit 7‐Segments (UART TTL 9600bps,n,8,1)
7Segment Shields ™
Switch 5 (Analog Pushbuttons)
LED 3
RTC (DS1307) Yes
EEPROM (24LC128) Yes
Temperature sensor (TMP75) Yes
Reset Pushbuttons Switch Yes
(Onboard peripheral device interfaces) Operating
Voltage 5V
7Segments Signal Interface
The 7‐Segments RX serial RS232 TTL level compatible interfaces. RS232 TTL control interfaces
(9600, n, 8, 1), for software serial interfaces or hardware serial interfaces. A different set of IO pins is
used. See Schematic.
The power pins are as follows:
• 5V. the 5V supply.
• GND. Ground pins.
Hardware Interface supported:
H3 H4
7‐Segment
J1
Temp. Sensor (TMP75)
At 7‐Segment (U1)
LED RTC (DS1307)
EEPROM
Reset
Analog Pushbuttons Switch
H1 H2
The Arduino 7Segment Shields™
Arduino 7Segment Shields Schematic