Scribd
Upload
10K views1 page

Manufacturing Process

This document outlines the units covered in a manufacturing processes course. It covers topics like metal cutting theory, tool materials, lathe operations, drilling machines, milling machines, grinding machines, and non-traditional machining processes. The units focus on tool geometry, tool life evaluation, tool materials, machine tools operations, and advanced machining techniques. Key machine tools covered include lathes, drilling machines, milling machines, and grinding machines.

Uploaded by

Ronald Reagon
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10K views1 page

Manufacturing Process

This document outlines the units covered in a manufacturing processes course. It covers topics like metal cutting theory, tool materials, lathe operations, drilling machines, milling machines, grinding machines, and non-traditional machining processes. The units focus on tool geometry, tool life evaluation, tool materials, machine tools operations, and advanced machining techniques. Key machine tools covered include lathes, drilling machines, milling machines, and grinding machines.

Uploaded by

Ronald Reagon
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MANUFACTURING PROCESS – II (06 ME 45)

PART – A
UNIT 1: Theory of Metal Cutting:
Single point cutting tool nomenclature, geometry, Merchants circle diagram and analysis,
Ernst Merchant’s solution, shear angle relationship, problems of Merchant’s analysis, tool
wear and tool failure, tool life, effects of cutting parameters on tool life, tool failure criteria,
Taylor’s tool life equation, problems on tool life evaluation. 7 Hours
UNIT 2: Cutting tool materials:
Desired properties, types of cutting tool materials – HSS, carbides coated carbides, ceramics
cutting fluids. Desired properties, types and selection. Heat generation in metal cutting,
factors affecting heat generation. Heat distribution in tool and W/P. Measurement of tool tip
temperature. 7 Hours

UNIT 3: Turning (Lathe), Shaping and planning machines:


Classification, constructional features of turret and capstan lathe, tool layout, shaping m/c,
planning m/c, driving mechanisms of lathe, shaping and planning machines, operations on
lathe, shaping machine and planning machine. 6 Hours
UNIT 4: Drilling machines:
Classification, constructional features, drilling & related operations, types of drill & drill bit
nomenclature, drill materials. 6 Hours

PART – B
UNIT 5: Milling machines:
Classification, constructional features, milling cutters nomenclature, milling operations, up
milling and down milling concepts. Indexing: Simple, compound, differential and angular
indexing calculations. Simple problems on simple and compound indexing. 7 Hours

UNIT 6: Grinding machines:


Types of abrasives, bonding process, classification, constructional features (cylindrical and
surface grinding), and selection of grinding wheel. 6 Hours

UNIT 7: Laping and Honing machines:


Principles of operation, construction, applications. 7 Hours
UNIT 8:Non-traditional machining processes:
Principle, need, equipment, operation and LBM, plasma arc machining, Electro chemical
machining, ultrasonic machining, abrasive let machining, water jet machining. 6 Hours
Text Books:
1. Workshop Technology by Hazara Choudhry, Vol-II, Media Promoters & Publishers Pvt.
Ltd. 2004
2. Production Technology by R.K.Jain, Khanna Publications, 2003.
3. Production technology by HMT, Tata MacGraw Hill, 2001.
Reference Books:
1. Manufacturing Science by Amitabha Ghosh and Mallik, affiliated East West Press,
2003.
2. Fundamentals of Metal Machining and Machine Tools by G. Boothroyd, McGraw
Hill, 2000.

You might also like