Scribd
Upload
471 views

Staad Input

The document is an analysis report from the STAAD structural analysis software. It summarizes the modeling of a monorail support structure, including the joints, members, materials, supports, and applied loads. It then provides the results of the analysis, listing the end forces in each member under each load case.

Uploaded by

Larry Bea
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
471 views

Staad Input

The document is an analysis report from the STAAD structural analysis software. It summarizes the modeling of a monorail support structure, including the joints, members, materials, supports, and applied loads. It then provides the results of the analysis, listing the end forces in each member under each load case.

Uploaded by

Larry Bea
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

Friday, December 24, 2010, 04:09 PM

PAGE NO. 1

****************************************************
* *
* STAAD.Pro *
* Version 2004 Bld 1001.INDIA *
* Proprietary Program of *
* Research Engineers, Intl. *
* Date= DEC 24, 2010 *
* Time= 14:28:32 *
* *
* USER ID: Snow Panther [LZ0] *
****************************************************

INPUT FILE: MONORAIL-chiller-R0.STD


1. STAAD SPACE TABREED MONORAIL SUPPORT BEAM CALCULATION
2. START JOB INFORMATION
3. JOB NAME MONO RAIL ANALYSIS FOR CHILLER
4. ENGINEER DATE 25-DEC-10
5. END JOB INFORMATION
6. INPUT WIDTH 79
7. UNIT METER KN
8. JOINT COORDINATES
9. 1 0 0 0; 2 1.58 0 0; 3 4.74 0 0; 5 3.16 0 0; 6 0 0.5 0; 9 1.58 0.5 0
10. 12 3.16 0.5 0; 15 4.74 0.5 0
11. MEMBER INCIDENCES
12. 1 1 2; 2 2 5; 4 5 3; 5 1 6; 8 2 9; 11 5 12; 14 3 15
13. DEFINE MATERIAL START
14. ISOTROPIC STEEL
15. E 2.05E+008
16. POISSON 0.3
17. DENSITY 76.8195
18. ALPHA 1.2E-005
19. DAMP 0.03
20. END DEFINE MATERIAL
21. CONSTANTS
22. MATERIAL STEEL MEMB 1 2 4 5 8 11 14
23. MEMBER PROPERTY BRITISH
24. 1 2 4 5 8 11 14 TABLE ST UC152X152X30
25. SUPPORTS
26. 6 9 12 15 FIXED BUT MY
27. DEFINE MOVING LOAD
28. TYPE 1 LOAD -120
29. DIST
30. LOAD 1 ULTIMATE DL
31. SELFWEIGHT Y -1.4
32. LOAD GENERATION 14 ADD LOAD 1
33. TYPE 1 0 0 0 XINC 0.35
34. PERFORM ANALYSIS PRINT LOAD DATA
Friday, December 24, 2010, 04:09 PM
TABREED MONORAIL SUPPORT BEAM CALCULATION -- PAGE NO. 2

P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS/MEMBER+ELEMENTS/SUPPORTS = 8/ 7/ 4
ORIGINAL/FINAL BAND-WIDTH= 5/ 5/ 25 DOF
TOTAL PRIMARY LOAD CASES = 15, TOTAL DEGREES OF FREEDOM = 28
SIZE OF STIFFNESS MATRIX = 1 DOUBLE KILO-WORDS
REQRD/AVAIL. DISK SPACE = 12.0/ 64322.8 MB, EXMEM = 869.9 MB
Friday, December 24, 2010, 04:09 PM
TABREED MONORAIL SUPPORT BEAM CALCULATION -- PAGE NO. 3

LOADING 1 ULTIMATE DL
-----------

SELFWEIGHT Y -1.400

ACTUAL WEIGHT OF THE STRUCTURE = 1.983 KN

LOADING 2
-----------

MEMBER LOAD - UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

1 -120.000 GY 0.00

SELFWEIGHT Y -1.400

ACTUAL WEIGHT OF THE STRUCTURE = 1.983 KN

LOADING 3
-----------

MEMBER LOAD - UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

1 -120.000 GY 0.35

SELFWEIGHT Y -1.400

ACTUAL WEIGHT OF THE STRUCTURE = 1.983 KN

LOADING 4
-----------

MEMBER LOAD - UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

1 -120.000 GY 0.70

SELFWEIGHT Y -1.400

ACTUAL WEIGHT OF THE STRUCTURE = 1.983 KN


Friday, December 24, 2010, 04:09 PM
TABREED MONORAIL SUPPORT BEAM CALCULATION -- PAGE NO. 4

LOADING 5
-----------

MEMBER LOAD - UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

1 -120.000 GY 1.05

SELFWEIGHT Y -1.400

ACTUAL WEIGHT OF THE STRUCTURE = 1.983 KN

LOADING 6
-----------

MEMBER LOAD - UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

1 -120.000 GY 1.40

SELFWEIGHT Y -1.400

ACTUAL WEIGHT OF THE STRUCTURE = 1.983 KN

LOADING 7
-----------

MEMBER LOAD - UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

2 -120.000 GY 0.17

SELFWEIGHT Y -1.400

ACTUAL WEIGHT OF THE STRUCTURE = 1.983 KN

LOADING 8
-----------

MEMBER LOAD - UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

2 -120.000 GY 0.52
Friday, December 24, 2010, 04:09 PM
TABREED MONORAIL SUPPORT BEAM CALCULATION -- PAGE NO. 5

SELFWEIGHT Y -1.400

ACTUAL WEIGHT OF THE STRUCTURE = 1.983 KN

LOADING 9
-----------

MEMBER LOAD - UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

2 -120.000 GY 0.87

SELFWEIGHT Y -1.400

ACTUAL WEIGHT OF THE STRUCTURE = 1.983 KN

LOADING 10
-----------

MEMBER LOAD - UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

2 -120.000 GY 1.22

SELFWEIGHT Y -1.400

ACTUAL WEIGHT OF THE STRUCTURE = 1.983 KN

LOADING 11
-----------

MEMBER LOAD - UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

2 -120.000 GY 1.57

SELFWEIGHT Y -1.400

ACTUAL WEIGHT OF THE STRUCTURE = 1.983 KN

LOADING 12
-----------
Friday, December 24, 2010, 04:09 PM
TABREED MONORAIL SUPPORT BEAM CALCULATION -- PAGE NO. 6

MEMBER LOAD - UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

4 -120.000 GY 0.34

SELFWEIGHT Y -1.400

ACTUAL WEIGHT OF THE STRUCTURE = 1.983 KN

LOADING 13
-----------

MEMBER LOAD - UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

4 -120.000 GY 0.69

SELFWEIGHT Y -1.400

ACTUAL WEIGHT OF THE STRUCTURE = 1.983 KN

LOADING 14
-----------

MEMBER LOAD - UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

4 -120.000 GY 1.04

SELFWEIGHT Y -1.400

ACTUAL WEIGHT OF THE STRUCTURE = 1.983 KN

LOADING 15
-----------

MEMBER LOAD - UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

4 -120.000 GY 1.39

SELFWEIGHT Y -1.400

ACTUAL WEIGHT OF THE STRUCTURE = 1.983 KN


Friday, December 24, 2010, 04:09 PM
TABREED MONORAIL SUPPORT BEAM CALCULATION -- PAGE NO. 7

************ END OF DATA FROM INTERNAL STORAGE ************

35. PRINT MEMBER FORCES


Friday, December 24, 2010, 04:09 PM
TABREED MONORAIL SUPPORT BEAM CALCULATION -- PAGE NO. 8

MEMBER END FORCES STRUCTURE TYPE = SPACE


-----------------
ALL UNITS ARE -- KN METE

MEMBER LOAD JT AXIAL SHEAR-Y SHEAR-Z TORSION MOM-Y MOM-Z

1 1 1 -0.09 0.30 0.00 0.00 0.00 0.05


2 0.09 0.35 0.00 0.00 0.00 -0.10
2 1 0.19 119.93 0.00 0.00 0.00 -0.20
2 -0.19 0.72 0.00 0.00 0.00 -0.40
3 1 -24.39 97.81 0.00 0.00 0.00 15.77
2 24.39 22.84 0.00 0.00 0.00 -9.35
4 1 -29.35 66.33 0.00 0.00 0.00 17.64
2 29.35 54.32 0.00 0.00 0.00 -18.95
5 1 -21.53 33.76 0.00 0.00 0.00 11.46
2 21.53 86.89 0.00 0.00 0.00 -22.23
6 1 -7.77 8.36 0.00 0.00 0.00 3.33
2 7.77 112.29 0.00 0.00 0.00 -12.23
7 1 4.22 -3.11 0.00 0.00 0.00 -1.21
2 -4.22 3.76 0.00 0.00 0.00 -4.22
8 1 6.65 -6.07 0.00 0.00 0.00 -2.32
2 -6.65 6.72 0.00 0.00 0.00 -7.78
9 1 3.25 -4.59 0.00 0.00 0.00 -1.61
2 -3.25 5.24 0.00 0.00 0.00 -6.15
10 1 -0.76 -1.54 0.00 0.00 0.00 -0.38
2 0.76 2.19 0.00 0.00 0.00 -2.56
11 1 -0.16 0.19 0.00 0.00 0.00 0.03
2 0.16 0.46 0.00 0.00 0.00 -0.24
12 1 1.67 0.44 0.00 0.00 0.00 -0.08
2 -1.67 0.21 0.00 0.00 0.00 0.26
13 1 -0.64 0.94 0.00 0.00 0.00 0.28
2 0.64 -0.29 0.00 0.00 0.00 0.68
14 1 -3.40 1.24 0.00 0.00 0.00 0.64
2 3.40 -0.59 0.00 0.00 0.00 0.80
15 1 -2.89 0.89 0.00 0.00 0.00 0.49
2 2.89 -0.24 0.00 0.00 0.00 0.40

2 1 2 -0.07 0.33 0.00 0.00 0.00 0.09


5 0.07 0.33 0.00 0.00 0.00 -0.09
2 2 0.35 0.45 0.00 0.00 0.00 0.23
5 -0.35 0.20 0.00 0.00 0.00 -0.03
3 2 -7.27 2.14 0.00 0.00 0.00 2.51
5 7.27 -1.49 0.00 0.00 0.00 0.36
4 2 -2.37 5.20 0.00 0.00 0.00 6.11
5 2.37 -4.55 0.00 0.00 0.00 1.58
5 2 5.16 6.74 0.00 0.00 0.00 7.82
5 -5.16 -6.09 0.00 0.00 0.00 2.32
6 2 5.42 3.89 0.00 0.00 0.00 4.41
5 -5.42 -3.24 0.00 0.00 0.00 1.23
7 2 -7.79 112.50 0.00 0.00 0.00 11.54
5 7.79 8.15 0.00 0.00 0.00 -3.50
Friday, December 24, 2010, 04:09 PM
TABREED MONORAIL SUPPORT BEAM CALCULATION -- PAGE NO. 9

MEMBER END FORCES STRUCTURE TYPE = SPACE


-----------------
ALL UNITS ARE -- KN METE

MEMBER LOAD JT AXIAL SHEAR-Y SHEAR-Z TORSION MOM-Y MOM-Z

8 2 -17.27 86.17 0.00 0.00 0.00 21.45


5 17.27 34.48 0.00 0.00 0.00 -13.02
9 2 -19.29 52.47 0.00 0.00 0.00 17.90
5 19.29 68.18 0.00 0.00 0.00 -20.72
10 2 -13.86 20.95 0.00 0.00 0.00 8.44
5 13.86 99.70 0.00 0.00 0.00 -19.05
11 2 -0.98 1.17 0.00 0.00 0.00 0.60
5 0.98 119.48 0.00 0.00 0.00 -0.47
12 2 6.84 -5.27 0.00 0.00 0.00 -2.04
5 -6.84 5.92 0.00 0.00 0.00 -6.81
13 2 2.02 -5.76 0.00 0.00 0.00 -2.13
5 -2.02 6.41 0.00 0.00 0.00 -7.48
14 2 -5.53 -3.16 0.00 0.00 0.00 -1.00
5 5.53 3.81 0.00 0.00 0.00 -4.51
15 2 -5.93 -0.37 0.00 0.00 0.00 0.00
5 5.93 1.03 0.00 0.00 0.00 -1.11

4 1 5 -0.09 0.35 0.00 0.00 0.00 0.10


3 0.09 0.30 0.00 0.00 0.00 -0.05
2 5 0.07 0.37 0.00 0.00 0.00 0.10
3 -0.07 0.28 0.00 0.00 0.00 -0.03
3 5 -3.76 -0.51 0.00 0.00 0.00 -0.66
3 3.76 1.16 0.00 0.00 0.00 -0.65
4 5 -2.32 -0.50 0.00 0.00 0.00 -0.80
3 2.32 1.15 0.00 0.00 0.00 -0.51
5 5 0.69 -0.06 0.00 0.00 0.00 -0.51
3 -0.69 0.71 0.00 0.00 0.00 -0.09
6 5 1.57 0.38 0.00 0.00 0.00 -0.03
3 -1.57 0.27 0.00 0.00 0.00 0.12
7 5 -1.34 0.90 0.00 0.00 0.00 0.94
3 1.34 -0.25 0.00 0.00 0.00 -0.03
8 5 0.81 3.59 0.00 0.00 0.00 4.24
3 -0.81 -2.94 0.00 0.00 0.00 0.92
9 5 5.19 6.28 0.00 0.00 0.00 7.34
3 -5.19 -5.63 0.00 0.00 0.00 2.08
10 5 6.58 6.09 0.00 0.00 0.00 6.99
3 -6.58 -5.44 0.00 0.00 0.00 2.12
11 5 -0.25 0.15 0.00 0.00 0.00 -0.02
3 0.25 0.50 0.00 0.00 0.00 -0.26
12 5 -14.36 102.09 0.00 0.00 0.00 18.90
3 14.36 18.56 0.00 0.00 0.00 -6.90
13 5 -26.26 72.39 0.00 0.00 0.00 21.96
3 26.26 48.26 0.00 0.00 0.00 -14.89
14 5 -29.09 39.30 0.00 0.00 0.00 14.93
3 29.09 81.35 0.00 0.00 0.00 -18.15
15 5 -16.00 11.07 0.00 0.00 0.00 4.76
3 16.00 109.58 0.00 0.00 0.00 -10.58
Friday, December 24, 2010, 04:10 PM
TABREED MONORAIL SUPPORT BEAM CALCULATION -- PAGE NO. 10

MEMBER END FORCES STRUCTURE TYPE = SPACE


-----------------
ALL UNITS ARE -- KN METE

MEMBER LOAD JT AXIAL SHEAR-Y SHEAR-Z TORSION MOM-Y MOM-Z

5 1 1 -0.30 -0.09 0.00 0.00 0.00 -0.05


6 0.51 0.09 0.00 0.00 0.00 0.01
2 1 -119.93 0.19 0.00 0.00 0.00 0.20
6 120.14 -0.19 0.00 0.00 0.00 -0.11
3 1 -97.81 -24.39 0.00 0.00 0.00 -15.77
6 98.01 24.39 0.00 0.00 0.00 3.58
4 1 -66.33 -29.35 0.00 0.00 0.00 -17.64
6 66.53 29.35 0.00 0.00 0.00 2.96
5 1 -33.76 -21.53 0.00 0.00 0.00 -11.46
6 33.97 21.53 0.00 0.00 0.00 0.70
6 1 -8.36 -7.77 0.00 0.00 0.00 -3.33
6 8.57 7.77 0.00 0.00 0.00 -0.55
7 1 3.11 4.22 0.00 0.00 0.00 1.21
6 -2.91 -4.22 0.00 0.00 0.00 0.90
8 1 6.07 6.65 0.00 0.00 0.00 2.32
6 -5.87 -6.65 0.00 0.00 0.00 1.00
9 1 4.59 3.25 0.00 0.00 0.00 1.61
6 -4.38 -3.25 0.00 0.00 0.00 0.02
10 1 1.54 -0.76 0.00 0.00 0.00 0.38
6 -1.33 0.76 0.00 0.00 0.00 -0.76
11 1 -0.19 -0.16 0.00 0.00 0.00 -0.03
6 0.40 0.16 0.00 0.00 0.00 -0.05
12 1 -0.44 1.67 0.00 0.00 0.00 0.08
6 0.65 -1.67 0.00 0.00 0.00 0.75
13 1 -0.94 -0.64 0.00 0.00 0.00 -0.28
6 1.14 0.64 0.00 0.00 0.00 -0.04
14 1 -1.24 -3.40 0.00 0.00 0.00 -0.64
6 1.44 3.40 0.00 0.00 0.00 -1.06
15 1 -0.89 -2.89 0.00 0.00 0.00 -0.49
6 1.10 2.89 0.00 0.00 0.00 -0.95

8 1 2 -0.68 0.02 0.00 0.00 0.00 0.01


9 0.88 -0.02 0.00 0.00 0.00 0.00
2 2 -1.17 0.16 0.00 0.00 0.00 0.17
9 1.38 -0.16 0.00 0.00 0.00 -0.09
3 2 -24.99 17.12 0.00 0.00 0.00 6.84
9 25.19 -17.12 0.00 0.00 0.00 1.72
4 2 -59.52 26.98 0.00 0.00 0.00 12.84
9 59.73 -26.98 0.00 0.00 0.00 0.66
5 2 -93.63 26.69 0.00 0.00 0.00 14.41
9 93.84 -26.69 0.00 0.00 0.00 -1.07
6 2 -116.18 13.19 0.00 0.00 0.00 7.82
9 116.39 -13.19 0.00 0.00 0.00 -1.23
7 2 -116.27 -12.02 0.00 0.00 0.00 -7.32
9 116.47 12.02 0.00 0.00 0.00 1.32
8 2 -92.89 -23.91 0.00 0.00 0.00 -13.67
9 93.10 23.91 0.00 0.00 0.00 1.71
Friday, December 24, 2010, 04:10 PM
TABREED MONORAIL SUPPORT BEAM CALCULATION -- PAGE NO. 11

MEMBER END FORCES STRUCTURE TYPE = SPACE


-----------------
ALL UNITS ARE -- KN METE

MEMBER LOAD JT AXIAL SHEAR-Y SHEAR-Z TORSION MOM-Y MOM-Z

9 2 -57.71 -22.54 0.00 0.00 0.00 -11.75


9 57.91 22.54 0.00 0.00 0.00 0.48
10 2 -23.14 -13.10 0.00 0.00 0.00 -5.88
9 23.35 13.10 0.00 0.00 0.00 -0.67
11 2 -1.63 -0.82 0.00 0.00 0.00 -0.36
9 1.83 0.82 0.00 0.00 0.00 -0.05
12 2 5.06 5.17 0.00 0.00 0.00 1.77
9 -4.86 -5.17 0.00 0.00 0.00 0.81
13 2 6.04 2.67 0.00 0.00 0.00 1.45
9 -5.84 -2.67 0.00 0.00 0.00 -0.11
14 2 3.75 -2.13 0.00 0.00 0.00 0.20
9 -3.54 2.13 0.00 0.00 0.00 -1.27
15 2 0.62 -3.04 0.00 0.00 0.00 -0.41
9 -0.41 3.04 0.00 0.00 0.00 -1.12

11 1 5 -0.68 -0.02 0.00 0.00 0.00 -0.01


12 0.88 0.02 0.00 0.00 0.00 0.00
2 5 -0.57 -0.29 0.00 0.00 0.00 -0.07
12 0.78 0.29 0.00 0.00 0.00 -0.07
3 5 2.00 3.51 0.00 0.00 0.00 0.30
12 -1.79 -3.51 0.00 0.00 0.00 1.45
4 5 5.05 0.05 0.00 0.00 0.00 -0.79
12 -4.84 -0.05 0.00 0.00 0.00 0.81
5 5 6.15 -4.47 0.00 0.00 0.00 -1.80
12 -5.94 4.47 0.00 0.00 0.00 -0.43
6 5 2.86 -3.85 0.00 0.00 0.00 -1.20
12 -2.66 3.85 0.00 0.00 0.00 -0.73
7 5 -9.05 6.45 0.00 0.00 0.00 2.56
12 9.26 -6.45 0.00 0.00 0.00 0.67
8 5 -38.07 18.08 0.00 0.00 0.00 8.78
12 38.28 -18.08 0.00 0.00 0.00 0.26
9 5 -74.46 24.48 0.00 0.00 0.00 13.38
12 74.67 -24.48 0.00 0.00 0.00 -1.14
10 5 -105.79 20.44 0.00 0.00 0.00 12.05
12 106.00 -20.44 0.00 0.00 0.00 -1.84
11 5 -119.63 0.73 0.00 0.00 0.00 0.49
12 119.83 -0.73 0.00 0.00 0.00 -0.13
12 5 -108.02 -21.20 0.00 0.00 0.00 -12.09
12 108.22 21.20 0.00 0.00 0.00 1.49
13 5 -78.80 -28.28 0.00 0.00 0.00 -14.48
12 79.01 28.28 0.00 0.00 0.00 0.34
14 5 -43.11 -23.55 0.00 0.00 0.00 -10.42
12 43.32 23.55 0.00 0.00 0.00 -1.36
15 5 -12.10 -10.06 0.00 0.00 0.00 -3.65
12 12.30 10.06 0.00 0.00 0.00 -1.38

14 1 3 -0.30 0.09 0.00 0.00 0.00 0.05


15 0.51 -0.09 0.00 0.00 0.00 -0.01
Friday, December 24, 2010, 04:10 PM
TABREED MONORAIL SUPPORT BEAM CALCULATION -- PAGE NO. 12

MEMBER END FORCES STRUCTURE TYPE = SPACE


-----------------
ALL UNITS ARE -- KN METE

MEMBER LOAD JT AXIAL SHEAR-Y SHEAR-Z TORSION MOM-Y MOM-Z

2 3 -0.28 -0.07 0.00 0.00 0.00 0.03


15 0.49 0.07 0.00 0.00 0.00 -0.07
3 3 -1.16 3.76 0.00 0.00 0.00 0.65
15 1.36 -3.76 0.00 0.00 0.00 1.23
4 3 -1.15 2.32 0.00 0.00 0.00 0.51
15 1.36 -2.32 0.00 0.00 0.00 0.65
5 3 -0.71 -0.69 0.00 0.00 0.00 0.09
15 0.91 0.69 0.00 0.00 0.00 -0.43
6 3 -0.27 -1.57 0.00 0.00 0.00 -0.12
15 0.48 1.57 0.00 0.00 0.00 -0.66
7 3 0.25 1.34 0.00 0.00 0.00 0.03
15 -0.05 -1.34 0.00 0.00 0.00 0.64
8 3 2.94 -0.81 0.00 0.00 0.00 -0.92
15 -2.74 0.81 0.00 0.00 0.00 0.52
9 3 5.63 -5.19 0.00 0.00 0.00 -2.08
15 -5.43 5.19 0.00 0.00 0.00 -0.52
10 3 5.44 -6.58 0.00 0.00 0.00 -2.12
15 -5.24 6.58 0.00 0.00 0.00 -1.17
11 3 -0.50 0.25 0.00 0.00 0.00 0.26
15 0.71 -0.25 0.00 0.00 0.00 -0.14
12 3 -18.56 14.36 0.00 0.00 0.00 6.90
15 18.76 -14.36 0.00 0.00 0.00 0.28
13 3 -48.26 26.26 0.00 0.00 0.00 14.89
15 48.46 -26.26 0.00 0.00 0.00 -1.76
14 3 -81.35 29.09 0.00 0.00 0.00 18.15
15 81.56 -29.09 0.00 0.00 0.00 -3.60
15 3 -109.58 16.00 0.00 0.00 0.00 10.58
15 109.79 -16.00 0.00 0.00 0.00 -2.59

************** END OF LATEST ANALYSIS RESULT **************

36. PARAMETER
37. CODE BS5950
38. SGR 0 MEMB 1 2 4
39. TRACK 1 MEMB 1 2 4
40. CHECK CODE MEMB 1 2 4 5 8 11 14

STAAD.Pro CODE CHECKING - (BSI )


***********************

PROGRAM CODE REVISION V2.9_5950-1_2000


Friday, December 24, 2010, 04:10 PM
TABREED MONORAIL SUPPORT BEAM CALCULATION -- PAGE NO. 13

ALL UNITS ARE - KN METE (UNLESS OTHERWISE NOTED)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================

1 ST UC1 52X152X30 PASS BS-4.2.3-(Y) 0.710 2


0.19 C 0.00 -0.20 0.00
|---------------------------------------------------------------------|
| CALCULATED CAPACITIES FOR MEMB 1 UNIT - kN,m SECTION CLASS 1 |
|MCZ= 68.2 MCY= 30.2 PC= 903.4 PT= 1053.2 MB= 68.2 PV= 169.0|
| BUCKLING CO-EFFICIENTS mLT = 1.00, mx = 1.00, my = 1.00, myx = 1.00 |
| PZ= 1053.25 FX/PZ = 0.00 MRZ= 68.2 MRY= 30.2 |
|---------------------------------------------------------------------|
2 ST UC1 52X152X30 PASS BS-4.2.3-(Y) 0.707 11
0.98 T 0.00 -0.47 1.58
|---------------------------------------------------------------------|
| CALCULATED CAPACITIES FOR MEMB 2 UNIT - kN,m SECTION CLASS 1 |
|MCZ= 68.2 MCY= 30.2 PC= 903.4 PT= 1053.2 MB= 68.2 PV= 169.0|
| BUCKLING CO-EFFICIENTS mLT = 1.00, mx = 1.00, my = 1.00, myx = 1.00 |
| PZ= 1053.25 FX/PZ = 0.00 MRZ= 68.2 MRY= 30.2 |
|---------------------------------------------------------------------|
4 ST UC1 52X152X30 PASS BS-4.2.3-(Y) 0.648 15
16.00 T 0.00 -10.58 1.58
|---------------------------------------------------------------------|
| CALCULATED CAPACITIES FOR MEMB 4 UNIT - kN,m SECTION CLASS 1 |
|MCZ= 68.2 MCY= 30.2 PC= 903.4 PT= 1053.2 MB= 68.2 PV= 169.0|
| BUCKLING CO-EFFICIENTS mLT = 1.00, mx = 1.00, my = 1.00, myx = 1.00 |
| PZ= 1053.25 FX/PZ = 0.02 MRZ= 68.2 MRY= 30.2 |
|---------------------------------------------------------------------|
5 ST UC1 52X152X30 PASS BS-4.8.2.2 0.324 3
97.81 T 0.00 -15.77 0.00
8 ST UC1 52X152X30 PASS BS-4.8.2.2 0.300 5
93.63 T 0.00 14.41 0.00
11 ST UC1 52X152X30 PASS BS-4.8.2.2 0.287 13
78.80 T 0.00 -14.48 0.00
14 ST UC1 52X152X30 PASS BS-4.8.2.2 0.343 14
81.35 T 0.00 18.15 0.00

************** END OF TABULATED RESULT OF DESIGN **************

41. FINISH
Friday, December 24, 2010, 04:10 PM
TABREED MONORAIL SUPPORT BEAM CALCULATION -- PAGE NO. 14

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= DEC 24,2010 TIME= 14:28:33 ****

***********************************************************
* For questions on STAAD.Pro, *
* Please contact : Research Engineers Ltd. *
* E2/4,Block GP, Sector-V,Salt Lake, KOLKATA - 700 091 *
* India : TEL:(033)2357-3575 FAX:(033)2357-3467 *
* email : [email protected] *
* US : Ph-(714) 974-2500, Fax-(714) 921-0683 *
***********************************************************

You might also like