Earthmover &

Industrial Tire
Reference

1
 Safety Procedures
Small Tires - Less Than 25''
Safety Warning: To avoid serious injury...
• NEVER exceed maximum pressure rating of the wheel.
Specifically for industrial tires: Certain two-piece wheels are only capable
of accepting a maximum pressure of 75 psi.— consult wheel manufacturer.
Serious injury or death may result if maximum pressure is exceeded.
• Follow proper tire mounting and dismounting procedures. Only specially trained persons
should mount and dismount tires.
• Explosion of tire/rim assembly may result from welding or heating the rim without first
removing tire.
• Tire failure may result from overloading or excessive speed.
• Always consult the Michelin® Earthmover Technical Data Book or other documentation if you
are unsure of the recommended inflation pressure and proper safety procedures.

Large Tires - 25'' and Larger

Safety Warning: To avoid serious injury...
• Always properly secure the tire from falling or rolling to prevent personal and property injury.
• Maintain recommended inflation pressure. Under- and over-inflation can be dangerous to
people and cause tire damage, improper vehicle handling and rapid, irregular wear.
• Never exceed maximum pressure rating of the wheel. Serious injury or death may result if
maximum pressure is exceeded.
• Follow proper tire mounting and dismounting procedures. Only specially trained persons
should mount and dismount tires.
• Explosion of tire/rim assembly may result from welding or heating the rim without first
removing the tire.
• Improper handling may cause irreparable damage to the tire.
• Always consult the Michelin® Earthmover Technical Data Book or other documentation if you
are unsure of the recommended inflation pressure and proper safety procedures.

1
 Tire Construction
Michelin X -Radial Construction
® ®

The crown is stabilized by a

belt made up of several steel plies.

The casing has one steel

radial casing ply.

The Michelin® X®-radial tire is built to take punishment

and deliver more uptime on the job. Unlike its bias-ply
counterpart, the sidewalls and tread of a radial tire
work independently, absorbing shocks to your equip-
ment, your operator and your payload. Michelin’s
rugged, sophisticated X-radial design excels in all work
environments – from soft sand to tough shot rock.

Advantages: The sidewall and tread function separately.

• Long tire life The tread is unaffected by the flexing of the
• Exceptional traction on all sidewalls, so there is:
types of surfaces
- less deformation of the tire contact
• Low fuel consumption due area on the ground
to lower rolling Resistance
- less movement in contact patch
• Improved comfort
• Increased resistance to - no movement between casing plies
punctures and flats

Bias-Ply Construction

The crown The casing is made The crown and sidewalls are formed by the
is not stabilized of criss-crossed same fabric ply structure.
with belts. fabric plies.
The tread is subjected to flexing which causes:
- deformation of the tire contact
area on the ground
- movement in the contact patch
The casing plies tend to “scissor”
in relation to each other.

Disadvantages:
• Accelerated wear
• Less traction
• Less puncture resistance
• Increased fuel consumption
• Flat spotting

2
 Tires For Work Machines

S TM
D2
3
rL

D TM

PS T 2 TM

LA T M&
D TM upe
D TM L3

X ® /XL

XM E D
XL -1S

X ® 2+

XT lus
-1
TM

M
M
70

D1
70

27 T

D
IN

op

SL TM
M
TM
A TM

D TM
2

D TM
LA

TM
SIZES

Sn
M
XM
XH
XG

XR
XR

XS

XZ
XL
XL
7.50 R15
Sizes available
8.25 R15
10.00 R15 A Type — For the same conditions
14.5 R15 as A4 but enables
27x8.5 R15 higher speeds and is
11 LR16 near A4 performance.
10 R16.5
12 R16.5 D1 — Deep Rock
275/80 R18
D1A — Deep Rock and A Type
335/80 R18 D2
9.00 R20 D2 — Super Deep Rock
12.00 R20 D2
275/80 R20 DNA — Rock Tread and A Type
335/80 R20
375/75 R20
405/70 R20
425/75 R20
12.00 R24
13.00 R24 A
14.00 R24 A
16.00 R24 A
16.9 R24
17.5 LR24
19.5 LR24
15.5 R25
TM
16.00 R25 XGLA2 TM

17.5 R25 D2 D1A

18.00 R25 The L2/G2 Michelin® radial tire designed with
20.5 R25 D2 D1A aggressive, non-directional tread to give graders
555/70 R25 maximum traction.
23.5 R25 D2 D1A
625/70 R25
26.5 R25 D1,D2
705/70 R25
755/70 R25
29.5 R25 D1,D2
18.4 R26
16.9 R28
19.5 R28
29.5 R29 D2 D1A
30/65 R29 DNA
16.9 R30 X MINE D2
®
® TM

18.4 R30
35/65 R33 D1,D2 DNA
This rugged Michelin® super L5 traction radial is
45/65 R39 D1,D2
designed to give maximum protection in severe
45/65 R45 D1,D
55/80 R57
hard rock quarries, underground mines, scrap and
solid-waste applications.

TM TM
XHA TM
XLD 70-1 L3 TM TM
XLD 70-1 SuperL3
TM
XLD
XLD D1 TM
D1 // XLD
XLD D2
TM
D2 TM
TM

The versatile Michelin® L3 radial tire designed for The technologically advanced, low-profile The technologically advanced, low-profile The directional Michelin® L4/L5 radial tire for
loaders, graders and other equipment used in Michelin® radial tire for small and medium loaders Michelin® radial tire for small and medium loaders wheel loaders designed to provide high levels of
construction stockpile and truck-loading applications. engineered to substantially increase productivity in engineered to substantially increase productivity in stability, traction and protection combined with a
moderately abrasive conditions. moderately abrasive conditions. cushioned ride for operator comfort.

3
 Tires For Work Machines

TM TM TM
XMPS TM
XM27 TM
TM
XR TM
XRD TM

The Michelin® radial tire designed with This rugged Michelin® R4 radial tire for backhoes The Michelin® radial tire with a time-proven, The Michelin® radial tire designed to deliver extra
an aggressive, non-directional tread to give and loaders is designed to provide excellent versatile tread design that delivers both excellent protection and a high level of performance on wheel
graders increased productivity year round. traction and durability both on- and off-road. traction on soft surfaces and long life in long-haul, loaders and scrapers.
high-speed applications.
®

TM

XSM D2+ TM
TM
X®®SNOPLUS M&STM XTLA TM
TM
XZSL TM

This Michelin® radial tire is designed to provide

The super-deep, smooth Michelin® radial tire The all-season Michelin® radial tire designed for The Michelin® L2/G2 radial tire designed to superior performance in every category while
designed for maximum wear and use on graders and loaders where exceptional provide exceptional traction and long, even delivering real cost savings for skid-steer
reliability on wheel loaders and haulers working in traction on snow and ice is required. treadwear on loaders and graders. operations.
severe mining, quarry and waste-handling conditions.

LE C
ZE S /

RS
APPLICATIONS

ND PI

RS
TS
E

S
HO

HA SCO
ER

RS
FO AIN
RR -

DO DER
LIF

PE
TE GH

RS
AD
CK

RA
RK

ID
EE
U

LE
TREAD PATTERN TRA CODE*
RO

GR
BA

LO

SK
SC

ST
TE

XGLA2 TM
G2, L2
XHATM L3
XLD 70-1 L3
TM
L3
XLDTM 70-1 Super L3 L3
XLDTM D1 L4
XLDTM D2 L5
X® MINE D2TM L5
XMPS TM
G2
XM27TM R4
XR TM
G3, L3
XRDTM L3, L4
XSM D2+ TM
L5S
X® SNOPLUS M&STM G2, L2
XTLATM G2, L2, E2
XZSL TM
L3

4
 Tires For Transport Machines

3
DN PER E

TM
XR RRY
U
-1S

TM

1 TM

TM

UA
M
65

C TM

TM
TM

D TM
DT T

C TM
S TM
D TM

D1
TT

TM

TM
Sizes available SIZES

Q
D
C
R

X®
XG

XH

XH

XK

XK
XD

XD
XA

XA

XR

XV
XR
XA
A Type — For the same conditions 12.00 R24 A
as A4 but enables higher 14.00 R24 A A A
speeds and is near A4 13.00 R25 B
performance. 14.00 R25 A,A4 A B
16.00 R25 A4,B AB AB B A
A4 Type — The ideal solution for
aggressive surfaces 17.5 R25 B D1A
where the risk of cutting 18.00 R25 AB A A B D1A
and hacking is high. 20.5 R25 A4,B A,B A A B D1A
21.00 R25 A
B Type — For heat generation 23.5 R25 A
resistance in intensive 660/65 R25
use on long-haul cycles. 25/65 R25 B
26.5 R25 A
B4 Type — A compromise between
resistance to abrasion 750/65 R25 1,D2
and heat generation for 29.5 R25 A4,B A,B
less aggressive surfaces. 810/65 R25
29.5 R29 ,B4,B B D1A
C Type — Specially designed 33.25 R29 B
to cope with the 18.00 R33 A,A4,B A A B
highest-speed hauls. 37.5 R33 B
21.00 R35 A,A4,B A A B
C4 Type — Engineered to cope
with high-speed travel 24.00 R35 A,A4,B AB AB B
on long hauls. 29.5 R35 B
33.25 R35 B
D1 — Deep Rock 37.25 R35 B
37.5 R39 B
D1A — Deep Rock and A Type 40.5/75 R39 DNB
24.00 R49 A,A4,B A B
D1B — Deep Rock and B Type
27.00 R49 A,B,B4 A,A4,B B B A,B,B4 B
D2 — Super Deep Rock 30.00 R51 A,B,B4 B
33.00 R51 A,B,B4 A,A4,B AB
DNA — Rock Tread and A Type 36.00 R51 A,B,B4 B AB B
37.00 R57 A,B,B4,C4 A,B,C4
DNB — Rock Tread and B Type 40.00 R57 A,B,B4,C4 A,B,B4 AB

TM TM TM
XAD TM
XAD 65-1Super
65-1Super E3
TM
E3 XHD1 TM
XR TM
XADN TM

The Michelin® Super E3 low-profile, low- pressure The deep-tread Michelin® radial tire designed for The Michelin® radial tire with a time-proven, The Michelin® E3 radial tire for articulated trucks
radial tire designed to deliver excellent flotation, haul trucks operating in demanding job versatile tread design that delivers both excellent designed to deliver exceptional reliability in a
lateral stability and traction for articulated conditions where traction and protection are required. traction on soft surfaces and long life in long-haul, variety of applications.
dump trucks. high-speed applications.

5
 Tires For Transport Machines

TM TM TM TM
XADT TM
XDT TM
XGC TM
XK TM

The extra-deep tread Michelin® E4 radial tire for The Michelin® E4 radial tire for haul trucks designed The non-directional Michelin® radial tire designed The Michelin® radial tire designed to deliver
articulated trucks designed to deliver exceptional to provide excellent adhesion and traction in severe to deliver exceptional operator comfort and dura- maximum protection in severe transport and
performance and durability in solid waste and conditions. bility in high-speed and demanding on- and off- abrasive underground mining conditions.
quarry applications. road crane applications.

TM TM TM
XKD1 TM
XHC TM
X QUARRY
®
® TM
XRD TM

The Michelin® radial E4 tire for use on haul The multi-purpose Michelin® radial tire designed The extremely durable Michelin® E4 radial tire The Michelin® radial tire designed to deliver extra
trucks in the most demanding mine and quarry for a wide spectrum of applications such as normal designed for use on haul trucks running at low protection and a high level of performance on
conditions. highway and off-road crane operations. speeds in the most damaging quarry conditions. wheel loaders and scrapers.

TM TM TM
XRS TM
XVC TM
XDR TM

The non-directional Michelin® radial tire The Michelin® radial E2 tire designed especially The Michelin® radial E4 tire for haul trucks
for large scrapers designed to provide for high-speed applications on well-maintained site designed to deliver maximum protection and
excellent longitudinal/lateral traction and roads and highways. excellent traction in the most severe mine and
exceptional tread and sidewall cut protection. quarry conditions.

P
KS UM
ER ED

APPLICATIONS
RS
MP AT

RS

UC D
S
S

E /

ES
ER

CR BILE
DU ICUL

PE

TR TOM
UE

PE
FIR SH

AN

DU ID
AD

RA
M
SC
A

G
T

TREAD PATTERN TRA CODE*

T
CR

LO
AR

RE

SC

BO
RI
M

XAD 65-1Super E3
TM
E3
XADNTM E3
XADTTM E4
XDRTM E4
XDTTM E4
XGC TM
E2
XHCTM E2
XHD1 TM
E4
XKTM E3
XKD1 TM
E4
X® QUARRYTM E4
XRTM E2, E3
XRDTM E3
XRSTM E3
XVC TM
E2

6
 Tires For Industrial Machines

B TM

SL TM
M TM

Z TM
SC T
R TM
SIZES

RI
X®

XZ

XZ

XZ
XZ

XZ
5.00 R8
125/75 R8 (15 x 41/2 R8)
150/75 R8 (16 x 6 R8) XZM TM
TM
XZR TM
TM
180/70 R8 (18 x 7 R8)
6.00 R9 The rugged pneumatic Michelin® radial tire The Michelin® radial tire for industrial tractors and
200/75 R9 (21 x 8 R9)
designed for forklift trucks, terminal tractors and trailers designed to deliver excellent traction, long
6.50 R10
other industrial equipment used in heavy-duty life and fuel efficiency.
7.50 R10
225/75 R10 (23 x 9 R10)
applications.
7.00 R12
250/75 R12 (27X10 R12)
7.00 R15
7.50 R15
8.25 R15
27x8.5 R15
225/75 R15 (28X9 R15)
250/70 R15 (250-15)
315/70 R15 (300-15)
355/65 R15 (350-15)
10 R16.5 TM TM
12 R16.5 XZSC TM
XZSL TM

9.00 R20
10.00 R20 The long-lasting Michelin® radial tire for straddle This Michelin® radial tire is designed to
11.00 R20 carriers designed to deliver excellent performance provide superior performance in every category while
12.00 R20 and low operating costs in the most demanding delivering real cost savings for skid-steer operations.
12.00 R24 conditions.
14.00 R24
16.00 R25
18.00 R25
18.00 R33

Sizes available

TM TM
XZZ TM
X®® RIB TM

The Michelin® radial tire for industrial tractors and The Michelin® radial tire for industrial tractors and
trailers designed to deliver long life and fuel trailers designed to deliver long life and fuel
efficiency. efficiency.
T
EN
PM
RS

UI
EQ
LE

S
ND

IER
UN

S
HA

RR
ES

KE
RO

CA
AN
ER

AC

T
TG
TS

OR

APPLICATIONS
RS
N

LE
CR

ST

EE
LIF
AI

SP
DD
OR

PE

ST
H
CK
NT

RK

AN
EE
AC

RA
RP

ID
DO

TREAD PATTERN
SW
CO

FO

RE

TR

SK
ST
AI

TM
X RIB
®

TM
XZM
TM
XZR
TM
XZSC
XZSLTM
XZZTM

7
 Tires For Special Applications

r TM
P TM acteu
p
om
TM

eC
D1
SIZES

s
M
M

Lis
XL T
XF T

XM
XH

X®
7.50 R15
18 R19.5
10.00 R20 XF TM
XHD1 TM
TM

11/80 R20
13/80 R20
The Michelin® radial tire with aggressive The deep-tread Michelin® radial tire designed for
18 R22.5
directional tread designed to deliver exceptional haul trucks operating in demanding job conditions
12.00 R24
traction and performance for rough-terrain forklifts where traction and protection are required.
14.00 R24
15.00 R24 and excavators.
395/80 R25
14.00 R25 A,A4
16.00 R25 A,B
17.5 R25
18.00 R25 A,B
23.5 R25

Sizes available

A Type — For the same conditions TM

as A4 but enables higher X LISSE
X LISSE COMPACTEUR
®
®
COMPACTEUR TM
XMP TM

speeds and is near A4

performance. The smooth Michelin® radial tire featuring a non- The Michelin® radial tire for utility transport and
stick tread compound designed for compactors logging operations designed to deliver exceptional
A4 Type — The ideal solution for
aggressive surfaces used in road construction. durability and cool running in high-speed
where the risk of cutting applications.
and hacking is high.

B Type — For heat generation

resistance in intensive
use on long-haul cycles.

TM
XL TM

The versatile, all-terrain Michelin® radial tire

designed to provide exceptional traction on soft,
muddy ground conditions and deliver solid
performance in high-speed applications.
TS
LIF

RS
UE

RK

TO
SC

FO

VA
RS
RE

ES
IN

CA
RS

PE
AN
E

EX
FIR
O

T
M
RR

OR
CR
CT

APPLICATIONS
DU
G
TE

ED
RY
/

IN
PA

SP
ILE
H

H-

EL
TA

D
GG
AS

AN
M

UG

OB

HE
GI
ILI
CO

TREAD PATTERN TRA CODE*

CR

LO

TR
RO

RI

W
M

XF TM
L2
XHD1TM E4
XLTM E2, E3
X LISSE COMPACTEUR
® TM
C1
XMPTM E2

8
 Star Rating / Ply Rating
Maximum Ply Rating (PR) and Corresponding
Star (*) Marking on Michelin® Radial Tires

Sizes and Work Transport Sizes and Work Transport Sizes and Work Transport
Marking Machines Machines Marking Machines Machines Marking Machines Machines
7.50 R 15 12 17.5 R 25 ** 20 24 18.00 R 33 ** 40
8.25 R 15 12 18.00 R 25 * 24 33.5 R 33 ** 44
18 R 19.5 * 16 18.00 R 25 ** 36 35/65 R 33 * 36
10.00 R 20 16 20.5 R 25 * 24 37.5 R 33 ** 48
C20 Pil (11/80 R 20) 16 20.5 R 25 ** 28 21.00 R 35 ** 44
E20 (13./80 R 20) (1) 21.00 R 25 ** 40 24.00 R 35 ** 48
15 R 22.5 * 16 23.5 R 25 * 28 29.5 R 35 ** 40
18 R 22.5 * 16 23.5 R 25 ** 32 33.25 R 35 ** 44
12.00 R 24 *** 24 24 25/65 R 25 ** 32 37.25 R 35 ** 48
13.00 R 24 TG * 14 26.5 R 25 * 32 37.5 R 39 ** 52
14.00 R 24 TG * 16 26.5 R 25 ** 32 40/65 R 39 * 42
14.00 R 24 24 29.5 R 25 * 34 40.5/75 R 39 ** 54
14.00 R 24 *** 28 32 29.5 R 25 ** 34 45/65 R 39 * (1)
15.00 R 24 (17/80 R 24) 28 555/70 R 25 * L2F 16 45/65 R 45 * 50
16.00 R 24 TG * 16 16 555/70 R 25 * L3T or Super 24 24.00 R 49 ** 48
16.00 R 24 ** 36 625/70 R 25 * L3T or Super 28 27.00 R 49 ** 54
555/70 R 24 TG * 16 705/70 R 25 * 32 30.00 R 51 ** 64
20 R 24 TG * 16 750/65 R 25 * 34 33.00 R 51 ** 68
13.00 R 25 *** 28 755/70R25* L3T 34 36.00 R 51 ** 74
14.00 R 25 *** 32 26.5 R 29 ** 34 37.00 R 57 ** (1)
15.5 R 25 * 16 29.5 R 29 * 34 40.00 R 57 ** 78
15.5 R 25 ** 20 29.5 R 29 ** 40 55/80 R 57 (1)
16.00 R 25 ** 36 30/65 R 29 * 28
17.5 R 25 * 16 33.25 R 29 ** 44

(1) no corresponding P.R. in these sizes, which are exclusively manufactured in radial construction.

Classification Of Earthmover Tires

Use code : C : Compactor Index : S : Smooth (mine, hard ground) 4 : Rock deep tread
G : Grader 1 : Ribbed (smooth surfaces) 5 : Rock extra-deep tread
E : Earthmoving 2 : Traction regular 7 : Flotation (work on soft ground)
L : Loader and Dozer 3 : Rock regular

Standardized identification code Michelin® tread patterns to be equated with the codes opposite
Code Tread pattern Application The Michelin tire that ensures equivalent service
C1 SMOOTH COMPACTOR X Lisse Compacteur
E1 RIBBED XRIB
E2 TRACTION XGC, XHC, XL, XMP, XR, XTLA, XVC
E3 ROCK TRANSPORT XAD65-1 SUPER E3, XADN, XHA, XK, XR, XRDN, XRS
E4 ROCK (deep tread) XADT, XDR, XDT, XHD1, XKD1, XQUARRY
E7 FLOTATION XRIB
G2 TRACTION GRADER XGLA2, XMPS, XSNOPLUS, XTLA
G3 ROCK XR
L2 TRACTION XF, XGLA2, XSNOPLUS, XTLA
L3 ROCK XHA, XK, XLD70-1 L3, XLD70-1 SUPER L3, XR, XRDN, XZSL
L4 ROCK (deep tread) LOADER XLDD1, XRD1
L5 ROCK (extra-deep tread) DOZER XLDD2, XMINED2
L5S SMOOTH (extra-deep tread) XSMD2+

MICHELIN® complementary identification: T = Traction, R = Rock, V = Speed, F = Flotation, P = Multi purpose, S/R = Smooth/Rock.
e.g. : L4T Rock tire (L4; Standardized identification code) where traction is needed (T; Michelin® code).

9
 Tire Range
1 - Different Tread Depths
overall diameter

N = Normal D1 = N x 1.5 D2 = N x 2.5

(Traction, rock) (rock, deep tread) (rock, extra deep tread)
(E2 / 3 - L2 / 3 - G2 / 3) (E4 - L4 - G4) (L5)

2 - Several Types of Rubber Compounds

type A4 highly resistant to cutting, hacking and abrasion.

type A highly resistant to cutting, hacking and abrasion for use at average speeds higher than type A4.

type B4 a compromise between resistance to abrasion and heat generation for less aggressive surfaces (from 49 inches).

type B designed for low heat generation on long runs and in intensive service conditions.

type C4 engineered to cope with high-speed travel on long hauls.

type C specially designed to cope with the highest-speed hauls.

10
 EARTHMOVER
www.michelin.com/earthmover
One Parkway South, PO Box 19001, Greenville, SC, 29602-9001
© 2000 MNA MEL 41736 (7/00)