Scribd
Upload
18 views

Unit Conversion

This document provides conversion factors between common units used in engineering for various process variables including length, power, viscosity, heat flux, volume, energy, flowrates, mass, density, pressure, area, and thermal conductivity. It includes metric and imperial units. The conversions are intended to help engineers perform calculations and conversions between different units of measurement for these process variables. The document was created by the Process Engineering Toolkit program from Aramco's Process and Control Systems department to assist with upstream process engineering.

Uploaded by

Vipul Phadatare
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
18 views

Unit Conversion

This document provides conversion factors between common units used in engineering for various process variables including length, power, viscosity, heat flux, volume, energy, flowrates, mass, density, pressure, area, and thermal conductivity. It includes metric and imperial units. The conversions are intended to help engineers perform calculations and conversions between different units of measurement for these process variables. The document was created by the Process Engineering Toolkit program from Aramco's Process and Control Systems department to assist with upstream process engineering.

Uploaded by

Vipul Phadatare
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

Length Power Dynamic Viscosity Heat Flux

in 1 hp (metric) 1 kg / m3
centipoise 1 Btu / hr . ft2 1
mm 25.4 hp 0.986290561 lb / ft . sec 0.000671969 watt / m2 3.154591

Volume Energy Kinematic Viscosity Specific Energy


yard 3 1 Btu 1 centistoke 1 Btu / lb 1
bbl 4.808904815 kW . hr 0.000293071 m2 / sec 1E-06 cal / kg 555.5556

Molar Flowrate Mass Mass Flowrate Specific Heat


Mscf / hr 1 Metric Ton 1 kg / hr 1 Btu / lb . F 1
MMscf / hr 0.001 kg 1000 kg / day 24 cal / kg . C 1000

Volumetric Flowrate Density Heat Transfer Coefficient


gal / min 1 kg / m3 462.7 Btu / hr . ft2 . F 1
m 3 / hr 0.227124808 lb / ft3 28.88542344 watt / cm2 . C 0.000567826

Pressure Area Thermal Conductivity


kPa 1866 m2 1 Btu / hr . ft . F 1 PROCESS ENGINEERING TOOLKIT
kg / cm2 19.02790589 ft2 10.76391042 watt / cm . C 0.01730735 PROCESS & CONTROL SYSTEMS DEPT.

UPSTREAM PROCESS ENGINEERING

UNIT CONVERSION PROGRAM

Please contact [email protected] if you have any suggestions to improve this program.

You might also like