Scribd
Upload
191 views3 pages

BSNL Jto Syllabus

The document outlines the syllabus for an electronics engineering course, covering 7 main topics: 1. Materials, components, physical electronics, and semiconductor devices. 2. Network theory, electromagnetic theory, and electronic measurements. 3. Power electronics and analog electronic circuits. 4. Digital electronic circuits and control systems. 5. Communication systems, microwave engineering, and computer engineering. 6. Microprocessors and their applications. 7. A general ability test on English comprehension, current events, and topics in telecommunications, history, and geography.

Uploaded by

lakshmi2348
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
191 views3 pages

BSNL Jto Syllabus

The document outlines the syllabus for an electronics engineering course, covering 7 main topics: 1. Materials, components, physical electronics, and semiconductor devices. 2. Network theory, electromagnetic theory, and electronic measurements. 3. Power electronics and analog electronic circuits. 4. Digital electronic circuits and control systems. 5. Communication systems, microwave engineering, and computer engineering. 6. Microprocessors and their applications. 7. A general ability test on English comprehension, current events, and topics in telecommunications, history, and geography.

Uploaded by

lakshmi2348
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

SECTION - I

1. Materials and components

Structure and properties of Electronic Engineering materials, Conductors, Semiconductors and


Insulators, Magnetic, Ferroelectric, Piezoelectric, Ceramic, Optical and Superconducting materials.
Passive components and characteristics, Resistors, Capacitors and Inductors; Ferrites, Quartz crystal,
Ceramic resonators, Electromagnetic and Electromechanical components.

2. Physical Electronics, Electron Devices and ICs

Electrons and holes in semiconductors, Carrier Statistics, Mechanics of current flow in a semi-conductor,
Hall effect; Junction theory; Different types of diodes and their characteristics; Bipolar Junction
transistor; Field effect transistors; Power switching devices like SCRs, CTOs, power MOSFETs; Basics of
ICs-bipolar, MOS and CMOS types; Basics of Opto Electronics.

3. Network theory

Network analysis techniques: Network theorem, transient and steady state sinusoidal response, and
Transmission criteria: delay and rise time Elmore's and other definition, effect of cascading. Elements of
network synthesis.

4. Electromagnetic Theory

Transmission lines: basic theory, standing waves, matching applications, micro strip lines; Basics of
waveguides and resonators; Elements of antenna theory.

5. Electronic Measurements and instrumentation

Basic concepts, standards and error analysis; Measurements of basic electrical quantities and
parameters; Electronic measuring instruments and their principles of working: analog and digital,
comparison, characteristics, and applications. Transducers; Electronic measurements of non-electrical
quantities like temperature, pressure, humidity etc. Basics of telemetry for industrial use.

6. Power Electronics

Power Semiconductor devices, Thyristor, Power transistor, MOSFETs, Characteristics and operation. AC
to DC converters; 1-Phase and 3-phase DC-to-DC Converters.

AC regulators. Thyristor controlled reactors, switched capacitor networks.

Inverters: Single-phase and 3-phase. Pulse width modulation. Sinusoidal modulation with uniform
sampling. Switched mode power supplies.
SECTION-II

1. Analog Electronic Circuits

Transistor biasing and stabilization, Small Signal analysis. Power amplifiers. Frequency response, Wide
band techniques, Feedback amplifiers. Tuned amplifiers. Oscillators. Rectifiers and power supplies.
Operational Amplifier, other linear integrated circuits and applications. Pulse shaping circuits and
waveform generators.

2. Digital Electronic Circuits

Transistor as a switching element; Boolean algebra, simplification of Boolean functions, Karnaugh Map
and applications; IC Logic gates and their characteristics; IC logic families: DTL, TTL, ECL, NMOS, PMOS
and CMOS gates and their comparison; Combinational logic circuits; Half adder, full adder; Digital
Compartor; Multiplexer Demultiplexer; ROM and their applications. Flip-flops, R-S, J-K, D and T flip-flops;
Different types of counters and registers; waveform generators. A/D and D/A convertors. Semiconductor
memories.

3. Control Systems

Transient and steady state response of control systems; Effect of feedback on stability and sensitivity,
Root locus techniques; Frequency response analysis. Concepts of gain and phase margins; Constant-M
and Constant-N Nichol's Chart; Approximation of transient response from Constant-N Nichol's Chart;
Approximation of transient response from closed loop frequency response; Design of Control Systems,
Compensators; Industrial controllers.

4. Communication systems

Basic information theory: Modulation and detection in analogue and digital systems; Sampling and data
reconstruction. Quantization & Coding; Time division and frequency division multiplexing; Equalisation;
Optical Communication: in free space & fiber optic; Propagation of signals at HF, VHF, UHF and
microwave
frequency; Satellite communication.

5. Microwave Engineering

Microwave Tubes and solid state devices, Microwave generation and amplifiers, Waveguides and other
Microwave Components and Circuits, Microstrip circuits, Microwave antennas, Microwave
Measurements, MASERS LASERS; Microwave Propogation. Microwave Communication Systems-
terrestrial and satellite based.

6. Computer Engineering

Number Systems; Data representation; Programming; Elements of a high level programming language
PASCAL/C; use of basic data structures; Fundamentals of computer architecture processor design;
Control unit design; Memory organization. I/O System Organization. Personal computers and their
typical uses.

7. Microprocessors

Microprocessor architecture - Instruction set and simple assembly language programming. Interfacing
for memory and I/O. Applications of Microprocessors in Telecommunications and power system.
SECTION-III
General ability test

The candidate's comprehension and understanding of General English shall be tested through simple
exercises. Questions on knowledge of current events and of such matter of everyday observation and
experience in their scientific aspects as may be expected of an educated person. Questions will also be
included on events and developments in Telecommunications, History of India and Geography. These
will be of a nature, which can be answered without special study by an educated person.

You might also like