Scribd
Upload
322 views

Pipeline Attributes Help

This document discusses how to use pipeline attributes in Isogen software. Pipeline attribute data from sources like Excel can be output to a CSV file and accessed in Isogen. The CSV file is defined in Isogen's FLS file along with function definition, positioned text, and drawing definition files. These files map the attribute data to -900 series attributes to place values on drawings in specified positions. When Isogen generates outputs, it will include the mapped pipeline attribute values.

Uploaded by

maskedlion
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
322 views

Pipeline Attributes Help

This document discusses how to use pipeline attributes in Isogen software. Pipeline attribute data from sources like Excel can be output to a CSV file and accessed in Isogen. The CSV file is defined in Isogen's FLS file along with function definition, positioned text, and drawing definition files. These files map the attribute data to -900 series attributes to place values on drawings in specified positions. When Isogen generates outputs, it will include the mapped pipeline attribute values.

Uploaded by

maskedlion
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

ALIAS ISOGEN SLIDES USING PIPELINE ATTRIBUTES PIPELINE ATTRIBUTES Slide 1

Overview
This User Defined input file allows
Pipeline Attribute data to be accessed by Isogen and output on the isometric using
TextPos and included in generated output files

Sample Pipeline Attributes are - LINE REFERENCE - P & ID FROM - P & ID TO -


UNIT NUMBER - PAINT CODE - OPERATING TEMP - etc.

Pipeline Attribute source data is usually held in a data system such as Microsoft Excel or
Access but this must be output to a CSV (Comma Delimited) file to produce the form of text
file that ISOGEN can read

In ISOGEN the input file is held at Project level - the actual name is User definable and
should be allocated a meaningful name such as PIPEATTS.ATT
ALIAS ISOGEN SLIDES USING PIPELINE ATTRIBUTES PIPELINE ATTRIBUTES Slide 2

System Requirements
Entries required in the ISOGEN.FLS File:-

PIPELINE-ATTRIBUTE-FILE C:\MYPATH\MYPROJECT\FINAL\PIPEATTS.ATT (Slide 3)

FUNCTION-DEFINITION C:\MYPATH\MYPROJECT\FINAL\ATTA.FDF (Slide 4)

POSITIONED-TEXT C:\MYPATH\MYPROJECT\FINAL\FINAL.POS (Slide 5)

DRAWING-DEFINITION C:\MYPATH\MYPROJECT\FINAL\FINAL.DDF (Slide 6)


ALIAS ISOGEN SLIDES USING PIPELINE ATTRIBUTES PIPELINE ATTRIBUTES Slide 3

A section of a typical PIPEATTS.TXT file in the


PIPELINE-ATTRIBUTE-FILE CSV format :-
Information Only

1LINE REF,2P&ID 3FROM,3P&ID TO,4UNIT NO,5SERVICE CODE,6PAINT CODE,7OPERATING TEMP,


8DESIGN TEMP,9OPERATING PRESS,10DESIGN PRESSURE,11TEST PRESS,12TEST TYPE,13INSULATION THKS,
14HEAT TRACING,15INSULATION CODE,16DESIGN CODE,17MATERIAL
---------------------------------------------------------------------------------------------
"4-DDE-4325","300-019","300-020","300","PA",P12,170,220,14,21,28,T4,65,,"HC","DC12",CARB STL
"3-DDE-4326","300-020","300-020","300","PA",P12,230,280,10,15,20,T4,90,,"HC","DC12",CARB STL
"4-DDE-4327","300-020","300-020","300","PA",P12,230,280,10,15,20,T4,90,,"HC","DC12",CARB STL
"2-DDE-4328","351-019","351-020","351","FG",P10,170,220,14,21,28,T4,65,,"HC","DC12",CARB STL
Data

"4-DDE-4329","351-019","351-020","351","PB",P11,170,220,14,21,28,T4,65,,"HC","DC12",CARB STL
"8-DDE-4330","381-020","381-020","381","PA",P12,230,280,10,15,20,T4,90,,"HC","DC12",CARB STL
"4-DDE-4331","300-020","300-020","300","PA",P12,230,280,21,31.5,42,T4,90,,"HC","DC12",CARB STL
"6-ASC-6900","300-020","300-019","300","PA",P12,230,280,21,31.5,42,T4,65,,"HC","DC16”,ST STEEL
"1-ASC-6901","300-018","300-018","300","PA",P12,200,250,21,31.5,42,T4,65,,"HC","DC16”,ST STEEL

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Limitations
This is the pipeline used Max width of file = 250 characters
Max number of defined Pipeline
as an example in later slides Attribute entries in FDF = 100
(-900 to -999 record i.d.’s)
ALIAS ISOGEN SLIDES USING PIPELINE ATTRIBUTES PIPELINE ATTRIBUTES Slide 4

In the FUNCTION-DEFINITION-FILE - a section like this is needed -


FUNCTION-DEFINITION-FILE

PIPELINE-ATTRIBUTE-FILE This file assigns the Attribute Data field value


DELIMITER-CHARACTER , from the CSV file to an Isogen -900 series attribute,
IGNORE-CHARACTER " thus enabling Isogen to place the -900 attribute
-900 1 ! LINE REF.
-901 2 ! P & ID FROM on the User Defined Backing Sheet via the Text
-902 3 ! P & ID TO Positioned File.
-903 4 ! UNIT NO.
-904 5 ! SERVICE CODE
-905 6 ! PAINT CODE e.g.
-906 7 ! OPERATING TEMP. The P&ID value contained in Data Item 2 of the Pipeline
-907 8 ! DESIGN TEMP.
-908 9 ! OPERATING PRESSURE Attribute File is mapped to a -901 Pipeline Attribute
-909 10 ! DESIGN PRESSURE
-910 11 ! TEST PRESSURE
-911 12 ! TEST TYPE
-912 13 ! INSULATION THKS.
-913 14 ! HEAT TRACING
-914 15 ! INSULATION CODE
-915 16 ! DESIGN CODE
-916 17 ! MATERIAL

Assigned Data field Attribute


-900 series number in Identification Text
attribute PIPEATTS.TXT (These are comments only)
file
ALIAS ISOGEN SLIDES USING PIPELINE ATTRIBUTES PIPELINE ATTRIBUTES Slide 5

The POSITIONED-TEXT file contains the -900 series attributes with


their corresponding X & Y co-ordinates where they will be positioned on
the Backing Sheet, positions are in 1/100th mm:-

Table Table Numb Numb


Text X Y Char Char Offset Offset of of Table
ID No Pos Pos Width Height in X in Y Cols Lines Dir
----- --- --- ----- ------ ------ ------ ---- ----- -----

-901 30000 4000 0 250


-902 30000 3500 0 250
-903 30000 3000 0 250
-904 30000 2500 0 250
-905 30000 2000 0 250
-906 30000 1500 0 250
-907 35000 4000 0 250
-908 35000 3500 0 250
-909 35000 3000 0 250
-910 35000 2500 0 250
-911 35000 2000 0 250
-912 35000 1500 0 250
-916 40000 4000 0 250
-914 40000 3500 0 250
-915 40000 3000 0 250
ALIAS ISOGEN SLIDES USING PIPELINE ATTRIBUTES PIPELINE ATTRIBUTES Slide 6

The DRAWING-DEFINITION file contains an entry telling Isogen to


look for a Full match between the Pipeline Reference in the PCF file and
the Pipeline Reference in the Pipeline Attribute File and map the
corresponding data found to the -900 series records as cross referenced
in the Function Definition file:-

PIPELINE-REFERENCE-LOCATION-DEFINITION
FULL-REFERENCE -900
ALIAS ISOGEN SLIDES USING PIPELINE ATTRIBUTES PIPELINE ATTRIBUTES Slide 7

Drawing Output
The Attributes are positioned in their
respective positions on the isometric
with the table and titles having been
drawn previously on the Backing Sheet
Attribute Attribute Attribute

P & ID FROM 2 300-020 DESIGN TEMP. 8 280 MATERIAL 17 ST STEEL


P & ID TO 3 300-019 OPERATING PRESS.9 21 INSULATION CODE15 HC
UNIT NUMBER 4 300 DESIGN PRESS. 10 31.5 DESIGN CODE 16 DC16
SERVICE CODE 5 PA TEST PRESS. 11 42 HEAT TRACING NONE
PAINT CODE 6 P12 TEST TYPE 12 T4 SPOOLED BY TSR
OPERATING TEMP. 7 230 INSULATION THKS.13 65 CHECKED BY

You might also like