Scribd
Upload
47 views6 pages

Block: Decanter Model: Decanter - Inlet Stream: 1 First Liquid Outlet: 7 Second Liquid Outlet: 9 Property Option Set: NRTL Renon (NRTL) / Ideal Gas

This document describes a process with multiple blocks that separate and split streams of ethanol, benzene, and water. A decanter block splits the inlet stream into two liquid outlets. A flash block vaporizes some of the stream. Another flash block separates the stream into vapor, first liquid, and second liquid outlets. Two separator blocks further split the streams into ethanol/benzene and water streams. Mass, energy and component balances are provided for each block.

Uploaded by

Aditya Widian Putra
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
47 views6 pages

Block: Decanter Model: Decanter - Inlet Stream: 1 First Liquid Outlet: 7 Second Liquid Outlet: 9 Property Option Set: NRTL Renon (NRTL) / Ideal Gas

This document describes a process with multiple blocks that separate and split streams of ethanol, benzene, and water. A decanter block splits the inlet stream into two liquid outlets. A flash block vaporizes some of the stream. Another flash block separates the stream into vapor, first liquid, and second liquid outlets. Two separator blocks further split the streams into ethanol/benzene and water streams. Mass, energy and component balances are provided for each block.

Uploaded by

Aditya Widian Putra
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

BLOCK: DECANTER MODEL: DECANTER

--------------------------------
INLET STREAM: 1
FIRST LIQUID OUTLET: 7
SECOND LIQUID OUTLET: 9
PROPERTY OPTION SET: NRTL RENON (NRTL) / IDEAL GAS
***********************************************************************
* *
* VAPOR PRESENT IN FEED TO BLOCK *
* *
***********************************************************************

*** MASS AND ENERGY BALANCE ***


IN OUT RELATIVE DIFF.
TOTAL BALANCE
MOLE(LBMOL/HR) 100.000 100.000 0.000000E+00
MASS(LB/HR ) 4326.01 4326.01 -0.109450E-06
ENTHALPY(BTU/HR ) -0.554129E+07 -0.562459E+07 0.148095E-01

*** INPUT DATA ***

LIQUID-LIQUID SPLIT, TP SPECIFICATION


SPECIFIED TEMPERATURE F 90.0000
SPECIFIED PRESSURE PSI 15.0000
CONVERGENCE TOLERANCE ON EQUILIBRIUM 0.10000E-03
MAXIMUM NO ITERATIONS ON EQUILIBRIUM 30
EQUILIBRIUM METHOD EQUATION-SOLVING
KLL COEFFICIENTS FROM OPTION SET OR EOS
KLL BASIS MOLE
NO KEY COMPONENT IS SPECIFIED

*** RESULTS ***

OUTLET TEMPERATURE F 90.000


OUTLET PRESSURE PSI 15.000
CALCULATED HEAT DUTY BTU/HR -83297.
MOLAR RATIO 1ST LIQUID / TOTAL LIQUID 0.44859

L1-L2 PHASE EQUILIBRIUM :


COMP F X1 X2 K
ETHAN-01 0.100000 0.10203 0.098346 0.96387
BENZE-01 0.40000 0.88883 0.0023184 0.0026084
WATER 0.50000 0.0091329 0.89934 98.4715

BLOCK: FLASH2 MODEL: FLASH2


------------------------------
INLET STREAM: 2
OUTLET VAPOR STREAM: 10
OUTLET LIQUID STREAM: 11
PROPERTY OPTION SET: NRTL RENON (NRTL) / IDEAL GAS
*** MASS AND ENERGY BALANCE ***
IN OUT RELATIVE DIFF.
TOTAL BALANCE
MOLE(LBMOL/HR) 100.000 100.000 0.142109E-15
MASS(LB/HR ) 4326.01 4326.01 0.269106E-12
ENTHALPY(BTU/HR ) -0.554129E+07 -0.416708E+07 -0.247995

*** INPUT DATA ***


TWO PHASE TP FLASH
SPECIFIED TEMPERATURE F 175.000
SPECIFIED PRESSURE PSI 15.0000
MAXIMUM NO. ITERATIONS 30
CONVERGENCE TOLERANCE 0.000100000

*** RESULTS ***


OUTLET TEMPERATURE F 175.00
OUTLET PRESSURE PSI 15.000
HEAT DUTY BTU/HR 0.13742E+07
VAPOR FRACTION 0.90426

V-L PHASE EQUILIBRIUM :

COMP F(I) X(I) Y(I) K(I)


ETHAN-01 0.10000 0.10372E-02 0.11048 106.51
BENZE-01 0.40000 0.33374E-03 0.44232 1325.3
WATER 0.50000 0.99863 0.44721 0.44782
BLOCK: FLASH3 MODEL: FLASH3
------------------------------
INLET STREAM: 3
OUTLET VAPOR STREAM: 12
FIRST LIQUID OUTLET: 18
SECOND LIQUID OUTLET: 13
PROPERTY OPTION SET: NRTL RENON (NRTL) / IDEAL GAS

*** MASS AND ENERGY BALANCE ***


IN OUT RELATIVE DIFF.
TOTAL BALANCE
MOLE(LBMOL/HR) 100.000 100.000 0.000000E+00
MASS(LB/HR ) 4326.01 4325.97 0.830298E-05
ENTHALPY(BTU/HR ) -0.554129E+07 -0.580874E+07 0.460422E-01

*** INPUT DATA ***


THREE PHASE TP FLASH
SPECIFIED TEMPERATURE F 15.0000
SPECIFIED PRESSURE PSI 15.0000
MAXIMUM NO. ITERATIONS 30
CONVERGENCE TOLERANCE 0.000100000
NO KEY COMPONENT IS SPECIFIED
KEY LIQUID STREAM: 13

*** RESULTS ***


OUTLET TEMPERATURE F 15.000
OUTLET PRESSURE PSI 15.000
HEAT DUTY BTU/HR -0.26745E+06
VAPOR FRACTION 0.48822E-01
1ST LIQUID/TOTAL LIQUID 0.44424

V-L1-L2 PHASE EQUILIBRIUM :

COMP F(I) X1(I) X2(I) Y(I) K1(I) K2(I)


ETHAN-01 0.100 0.551E-01 0.547E-01 0.979 17.8 17.9
BENZE-01 0.400 0.943 0.123E-02 0.184E-01 0.195E-01 15.0
WATER 0.500 0.195E-02 0.944 0.273E-02 1.40 0.290E-02
BLOCK: SEP MODEL: SEP
---------------------------
INLET STREAM: 4
OUTLET STREAMS: 14 15
PROPERTY OPTION SET: NRTL RENON (NRTL) / IDEAL GAS

*** MASS AND ENERGY BALANCE ***


IN OUT RELATIVE DIFF.
TOTAL BALANCE
MOLE(LBMOL/HR) 100.000 100.000 0.000000E+00
MASS(LB/HR ) 4326.01 4326.01 0.000000E+00
ENTHALPY(BTU/HR ) -0.554129E+07 -0.530605E+07 -0.424529E-01

*** INPUT DATA ***

FLASH SPECS FOR STREAM 14


TWO PHASE TP FLASH
PRESSURE DROP PSI 0.0
MAXIMUM NO. ITERATIONS 30
CONVERGENCE TOLERANCE 0.000100000

FLASH SPECS FOR STREAM 15


TWO PHASE TP FLASH
PRESSURE DROP PSI 0.0
MAXIMUM NO. ITERATIONS 30
CONVERGENCE TOLERANCE 0.000100000

FRACTION OF FEED
SUBSTREAM= MIXED
STREAM= 14 CPT= ETHAN-01 FRACTION= 0.50000
BENZE-01 0.50000
WATER 0.0

*** RESULTS ***

HEAT DUTY BTU/HR 0.23524E+06

COMPONENT = ETHAN-01
STREAM SUBSTREAM SPLIT FRACTION
14 MIXED 0.50000
15 MIXED 0.50000

COMPONENT = BENZE-01
STREAM SUBSTREAM SPLIT FRACTION
14 MIXED 0.50000
15 MIXED 0.50000

COMPONENT = WATER
STREAM SUBSTREAM SPLIT FRACTION
15 MIXED 1.00000
BLOCK: SEP2 MODEL: SEP2
----------------------------
INLET STREAM: 5
OUTLET STREAMS: 16 17
PROPERTY OPTION SET: NRTL RENON (NRTL) / IDEAL GAS

*** MASS AND ENERGY BALANCE ***


IN OUT RELATIVE DIFF.
TOTAL BALANCE
MOLE(LBMOL/HR) 100.000 100.000 0.000000E+00
MASS(LB/HR ) 4326.01 4326.01 0.000000E+00
ENTHALPY(BTU/HR ) -0.554129E+07 -0.556554E+07 0.435691E-02

*** INPUT DATA ***

FLASH SPECS FOR STREAM 16


TWO PHASE TP FLASH
PRESSURE DROP PSI 0.0
MAXIMUM NO. ITERATIONS 30
CONVERGENCE TOLERANCE 0.000100000

FLASH SPECS FOR STREAM 17


TWO PHASE TP FLASH
PRESSURE DROP PSI 0.0
MAXIMUM NO. ITERATIONS 30
CONVERGENCE TOLERANCE 0.000100000

SPLIT FRACTION
SUBSTREAM= MIXED
STREAM= 16 CPT= ETHAN-01 FRACTION= 1.00000
BENZE-01 0.0
WATER 0.0

*** RESULTS ***

HEAT DUTY BTU/HR -24249.

STREAM= 16 SUBSTREAM= MIXED


COMPONENT = ETHAN-01 SPLIT FRACTION = 1.00000

STREAM= 17 SUBSTREAM= MIXED


COMPONENT = BENZE-01 SPLIT FRACTION = 1.00000
COMPONENT = WATER SPLIT FRACTION = 1.00000

You might also like