Scribd
Upload
164 views1 page

Resistor Color Code Calculator

This document provides frequently asked questions (FAQs) about resistor color codes: 1) For 3-band 20% resistors, the tolerance band is not present so values are calculated using the digit-digit-multiplier rule. Examples given are 220 ohm and 10k. 2) To determine the first band, hold the resistor so the closely grouped bands are on the left and read left to right, or hold a 5%/10% resistor so the silver/gold tolerance band is on the right. 3) If reading from the wrong end, calculate the value and check against a chart. If not listed, try reading from the other end to check the value.

Uploaded by

madscijrjr
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
164 views1 page

Resistor Color Code Calculator

This document provides frequently asked questions (FAQs) about resistor color codes: 1) For 3-band 20% resistors, the tolerance band is not present so values are calculated using the digit-digit-multiplier rule. Examples given are 220 ohm and 10k. 2) To determine the first band, hold the resistor so the closely grouped bands are on the left and read left to right, or hold a 5%/10% resistor so the silver/gold tolerance band is on the right. 3) If reading from the wrong end, calculate the value and check against a chart. If not listed, try reading from the other end to check the value.

Uploaded by

madscijrjr
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Resistor color code calculator

FAQs

The resistor has only 3 bands

You don't have to enter the 4th band, as 20% resistors don't have a tolerance ring. They will be calculated using the 4 band rule (digit, digit,
multiplier).

Examples:
Red, red, brown is a 220 ohm, 20% resistor
Brown, black, orange is a 10k, 20% resistor

Which band is the first?

The short answer: you'll know that from experience! But there are some rules you can follow:

1.) Some resistors have the color bands grouped together and/or close to one end. Hold the resistor with the closely grouped bands to your left
and read the resistor from the left to the right.

2.) With 5% and 10% resistors the procedure is simple: hold the resistor with the silver or gold band to the right and read the resistor from the left
to the right.

3.) The first band can't be silver or gold, so if you hold such a resistor you'll know instantly where to start. Also, the 3rd color for 4-band resistors
will be blue (106) or less and the 4th color for 5 band resistors will be green (105) or less, as basic resistor values range from 0.1 Ohm to 10
Mohms.

What happens, if I start reading from the wrong end?

You should always attempt to work out the value, then check your result against a resistor value chart to see if it's listed there. If it isn't, then try
reading it again starting from the other end and check again. This is a necessary step especially with five and six banded metal film resistors.

You might also like