BAT Catalog - Contour

PERFORMANCE & SERVICE
PARTS GUIDE
Contour / SVT / Cougar / Mystique / Mondeo
>>> CATALOG LAST UPDATED <<<

>>>>>>>>>> 06/17/04 <<<<<<<<<<<
BAT Inc.
British American Transfer Inc.
7630 Matoaka Road
Sarasota, FL 34243
phone (941) 355-0005
fax (941) 355-4683
www.batinc.net
Ford Contour Performance Parts.........by
BAT is very pleased to offer this line of
components for the U.S.A. specification
Contour, Mystique, SVT, Cougar and other
European models of the Ford Mondeo lineage.
This literature highlights a product line that we
expect will expand considerably as product
development continues over the next year. On
the next page you will find a helpful table of
contents, which we will use this to make you
aware of when each section was last updated
and the status of each section until full
completion. Although this catalog is not fully
you will still find more unique components for
your car than from any other source, and
most are in stock for immediate shipment.
BAT is a recognized Ford Motorsport

USA and Ford Motorsport/Rallysport
European dealer with over 30 years of
experience of tuning European Ford
automobiles. From Cortinas, Lotus Cars and
Anglias during the 60's through the 70's with
Pinto and Capri and into the 80's and 90's with
Fiesta, Escort, Merkur and now Contour. Our
expertise with building and racing 4 & 6 cylinder
Ford powered cars includes Formula Ford,
Formula Continental & Atlantic, SCCA
Production, Showroom Stock, Auto-X, Improved
Touring and Circle Track racing classes. We
have a highly capable staff and you can
confidently allow them to handle even your most
difficult technical needs. Better still, our ability
to buy in quantity, import products directly, and
manufacturer speciality components assures
you are getting the right parts at the right price.
BAT Inc. 7630 Matoaka Road. Sarasota, FL 34243 (941) 355-0005 fax (941) 355-4683
3 Ford Contour Performance Parts.........by
UNDER >>>> CONSTRUCTION ZONE <<<<
CONSTRUCTION
This whole catalog is a work in progress. Some sections
are close to completion and others are just under way.
Tune in here for updates and information on pending
parts & projects relating to part sections listed below.
CONSTRUCTION SCHEDULE:
section page#'s last updated % completed
Brake Components 4-10 04/20/04 90%
Suspension Components 11-19 03/01/03 90%

(pending: more urethane bushings, varrious items under development)
Road Wheels 20-21 04/17/04 90%
Engine Components 22-32 08/07/03 80%

(varrious items under development)
Exhaust Components 33-34 05/99/03 80%

Drivetrain Components 35-36 01/27/04 50%

(future items: replacement drive axles, C.V. joints & boots)
Lighting & Electrical 37-40 06/20/03 75%

(future items: Euro headlamps, quad headlamp kits, Euro Cougar 3 color tail lamps)
Interior/Exterior Items 41-45 03/02/04 50%

Current Specials 46-47 04/17/04 100%
123456789012
123456789012
123456789012
Front Brake TECH 123456789012
123456789012
Contour/Mystique (1995-2000) 4 and 6 cylinder
cars are all equipped with 260 x 24mm front rotors
and standard size ATE calipers.
Upgrades: Mintex pads with either standard
or cross-drilled rotors are the least expensive
performance upgrade. Another option would
be to bolt on the Cougar or SVT brake set-
up, however, this requires buying calipers and
rotors (expensive). A better option is our
R/S big brake kit which allows for fitting the
larger 278mm SVT type rotors with the standard
caliper. We supply the required brackets and
hardware with cross-drilled rotors and high BAT offers the Mintex line of high
performance Mintex 1144 pads. performance brake products
SVT (1998 to 5/1999) cars are equipped with larger 278 x 24mm front rotors and larger ATE calipers
and pads than standard Contours. This brake arrangement is similar to what some of the 4WD
Mondeos and other Cosworth powered Ford cars used in Europe.
Upgrades: Mintex pads with either standard or cross-drilled rotors are the least expensive performance
upgrade. We are also working on 4 piston caliper upgrades for use with the standard 278mm rotors as
well as 300mm large rotor and caliper brake kits.
SVT (after 5/1999) also equipped with larger 278mm front rotors but with
Cougar calipers that utilize the slightly smaller standard Contour pads
(read Cougar below).
Upgrades: Mintex pads with either standard or cross-drilled rotors are the
least expensive performance upgrade. Another option is to fit the early
SVT calipers and pads, again - expensive (although we hope to have a more
reasonable source for the early calipers in the future) We also have 4 piston
caliper upgrades for use with the standard 278mm rotors as well as 300mm
large rotor and caliper brake kits.
Cougar (1999-2000) are a combination of standard Contour and SVT brakes.

They use the larger SVT 278 x 24mm rotors but with the standard Contour
smaller size ATE caliper using a slightly different caliper mounting bracket to
clear the larger rotors diameter. So Cougars benefit from having larger
M1144 diameter rotors for increased braking leverage but do not have the larger
pad/caliper combo from the earlier SVT. One would think this was a Ford
cost cutting measure as the big calipers are quite expensive.
Upgrades: Mintex pads with either standard or cross-drilled rotors are
the least expensive performance upgrade. Another option is to fit the
early SVT calipers and pads, again...expensive and really not much of a benefit. We also have 4
piston caliper upgrades for use with the standard 278mm rotors as well as 300mm large rotor
and caliper brake kits.
Brake Compounds
Mintex 1144 is a rally/race compound is perfectly at home on track or street offering
a high coefficient of drag (.44) and excellent modulation throughout a very wide
temperature operating range (up to 1200 degrees). Mintex 1144 is unmatched in
terms of wear and fade characteristics with excellent "pedal feel". This is the brake
compound many European rally teams have used for years. No other brake related
upgrade will yield as much bang for the buck as upgrading to M1144 pads. Supplied
pre-burnished for easy break-in. For maximum effect match a set of Mintex 1144's
with our premium drilled sport rotors and Aeroquip stainless brake lines.
Mintex A/F Brake Pads are the highest quality, best performing, standard replacement
pads available for Contour cars. Mintex brand A/F "Abestos Free" semi-metallic linings
operate over a wide temperature range with very little fade or brake dusting.These basic
Mintex "street" pads actually outperform other manufacturers "performance" pads
(most notably) PBR/Axis Metal Master a recent national magazine test. In the under
$50.00 a set category Mintex A/F has everything beat. European E1/90 approved.
Hardware Kits BAT can supply a full range of brake hardware for the ATE type front calipers
(slide pins, bushings, load springs) see next page for front brake parts listing.
Front Brake Pads 95-2000 (all Contour, Cougar & SVT after 5/99) -see pad drawing below for assistance
Front Pad Set Mintex A/F K420AF $39.95
Front Pad Set Mintex 1144 K420G $99.50
actual size
scale 1:1
CONTOUR/MYSTIQUE (all),
COUGAR (all), SVT (from 5/99)
Front Brake Pads 98-99 (most SVT's before 5/99) Note: we have seen examples of cars produced before
5/99 that are fitted with the late type pad (see above). Check the pad drawings carefully before ordering.
Front Pad Set Mintex A/F K417AF $44.50
Front Pad Set Mintex 1144 K417G $129.50
actual size
scale 1:1
SVT (up to 5/99) ONLY

(SVT E0 & some E1)
Front Brake Hardware
We carry a full line of replacement brake hardware for the ATE Teves type front calipers used on the Contour.
This single piston sliding pin design is popular with many foreign car manufacturers (BMW, Ford, VW), and for
the most part is pretty foolproof, however they have been known to have occasional problems- usually hardware
related as we will cover below. Caliper Slide Pins can be a problem when the
pins become rusty or pitted and does not move freely within the bushing.
Inspect the pins finish and replace as needed. Caliper Bushings are
made of rubber and are sensitive to heat causing less than optimal pin
bushing clearance which has been known to cause a slight vibration
(usually felt through the brake pedal) when the brakes are applied
lightly. Sometimes customers are convinced the brake rotors are
wrapped when only the caliper bushings require replacement. We
usually recommend refreshing the caliper bushings when changing
pads to keep everything optimized. Caliper Springs serve both to
locate and tension the caliper/pad assembly as well as anti-rattle duty. They
usually hold up pretty well as long as they don't get bent up too badly or lost on removal. We don't usually replace
them with every pad change, rather every other- say 60,000 miles or so. All parts packaged to service 1 caliper,
two of each part are required to both sides.
Caliper Slide Pins (2) -all Contour, SVT, Cougar M420CP $16.25
Caliper Bushings (2) -all Contour, SVT, Cougar M420CB $14.00
Caliper Spring (1) -all except E0 SVT K420K7 $6.25
Caliper Spring (1) -E0 SVT only K420K7A $8.50
Brake Specials
Customers often comment about the great prices we offer
on our high quality brake components. We would even
like to go a step further. For anyone interested in buying
front and rear rotors and pads at the same time we have
an even better deal. We will supply front and rear European
specification brake rotors (by AP Lockheed or EBC)
matched with premium Mintex A/F brake pads (again both
front and rear) all for one low price. Shop around and you
will find we have the lowest price in the nation on a full set
of rotors and pads and we supply quality components not kits include premium brake rotors by
the typical low end "brand x" parts offerd by others.
& EBC
BRAKES
Complete 4 Wheel Brake Kits (Front & Rear)
Brake Special (cars with 260mm front & 253mm rear) K420SP $189.00
all Contour & Mystique -except SVT
Brake Special (cars with 278mm front & 253mm rear) K420SPA $245.00
SVT (specify if E0) and Cougar
Brake Kits with EBC Sport Rotors (Grooved & Dimpled) & Mintex A/F Pads NEW
These kits include 2 rotors and a pad set, available front or rear -sold seperately.
Front Brake Kit (260mm) Contour/Mystique i4 Cougar K420FG $195.00
Front Brake Kit (278mm) SVT (specify if E0) & V6 Cougar K420FGA $225.00
Rear Brake Kit (253mm) all with rear disk K420RG $195.00
12345678901
12345678901
12345678901
Rear Brake TECH 12345678901
12345678901
Rear brakes on the Contour/Cougar cars can also be confusing. If your 1995-2001
car is rear disk equipped they are 253 x 20mm vented rotors and all use one size
rear pad. Rear drum equipped 1995-96 cars are equipped with 203 x 38mm (8")
rear drums, but 1997-2001 cars are a mix of the 203 x 38mm (8") and larger 228 x
45mm (9") drums. This is probaibly a manufacturing supply issue when the cars
were built and the only way to determine which rear drum/shoe set is on you
car is to check before ordering parts. Performance upgrades for rear disk
equipped cars would be to go with the Mintex pads and cross-drilled rotors
and for rear drums upgrade to Mintex lined rear shoes.
Brake Hardware
BAT can supply a full range of brake hardware components for the ATE type front
calipers (slide pins, bushings, load springs) and also rear hardware kits for the drum
brake equipped cars.
Brake Compounds
Mintex 1144 rally/race compound is perfectly at home on track or street offering a high coefficient of drag (.44) and
excellent modulation throughout a very wide temperature operating range (up to 1200 degrees). Mintex 1144 is
unmatched in terms of wear and fade characteristics with excellent "pedal feel". This is the brake compound many
European rally teams have used for years. No other brake related upgrade will yield as much bang for the buck as
upgrading to M1144 pads. Supplied pre-burnished for easy break-in. For maximum effect match a set of Mintex
1144's with our premium drilled sport rotors and Aeroquip stainless brake lines.
Mintex A/F Brake Pads are the highest quality, best performing, standard replacement pads available for
Contour cars. Mintex brand A/F "Abestos Free" semi-metallic linings operate over a wide temperature range
with very little fade or brake dusting. These basic Mintex "street" pads actually outperform other manufacturers
"performance" pads (most notably) PBR/Axis Metal Master a recent national magazine test. In the under 50.00
a set category Mintex A/F has everything beat. European E1 / 90 approved.
REAR BRAKE COMPONENTS

Rear Brake Pads 95-2001 (all with rear disk) - see drawing below
Rear Pad Set Mintex A/F K420AR $39.95
Rear Pad Set Mintex 1144 K420GR $98.50
Hardware Kit K420K6 $20.75
Brake Shoes (check rear drum size) (REAR)
8" Rear Brake Shoe Set Mintex A/F K420RA $39.50 228 x 45mm (9")
Rear Hardware Kit for 8" brakes K420K5A $25.00 OR
9" Rear Brake Shoe Set Mintex A/F K420R $39.50 203 x 38mm (8")
Rear Hardware Kit for 9" brakes K420K5 $25.00 Shoe Size
drawing not
to scale
ALL WITH REAR DISK
actual size
scale 1:1
Rotors
BAT inventories a selection of rotors to satisfy both the performance minded
as well as the budget oriented customer.
Econo Rotors
Consistent high quality that meets or exceeds all O.E. specifications, and
although these rotors are inexpensive they are considerably better than
the usual "white box" specials commonly found at discount parts stores.
Economy Brake Rotor (1995-2000 Contour/Mystique)
Front Econo Rotor 260x 24mm K425 28.00ea.
Rear Econo Rotor 253 x20mm K425R 25.00ea.
Premium European Rotors- Standard & Cross Drilled

Our European Group-N rally specification rotors are made from "Carballoy"
(a medium flake graphite fully pearlitic low phosphorous iron)
manufactured to BS 1452 - 1990 grade 180/220 standard. Which equates
to longer life with more resistance to warping which is so common with
lesser quality (Ford as well as other offshore low budget type) rotors.
Looking for more of an upgrade? Cross-drilling brake rotors is an
excellent way to increase brake performance. Theory being that
centrifugal force will draw excess brake dust and expelled gasses
from the pad surface through the drilled passages into the rotors
vented cavity and out. This process also improves rotor cooling
giving improved braking response and resistance to fade. The
cross drilling process is handled by computer CNC milling
equipment with holes arranged in a parabolic pattern giving an even
sweeping effect to the pad surface ensuring maximum cooling with
minimum noise and drag. All holes (drillings) are radiused to minimum
thickness then rotors are rebalanced as the final process.
Premium Front Brake Rotor 260 x 24mm (1995-2001 Contour/Mystique)
Front Rotor- standard K425A $45.00ea.
Front Rotor- Cross-Drilled* K425CD $89.95ea.
Front Rotor-Grooved* (EBC Turbo Groove) K425G $79.00ea.
Front Rotor- Drilled & Grooved Combo* K425DS $99.25ea.
*drilled and drill/grooved rotors must by purchased as (handed) pairs- priced as each
premium brake
Premium Front Brake Rotor 278 x 24mm (1998-2001 SVT & Cougar V6) rotors by
Front Rotor- standard K426 $59.00ea.
Front Rotor- Cross-Drilled* K426CD $139.00ea.
Front Rotor-Grooved* (EBC Turbo Groove) K426G $95.00ea.
Front Rotor- Drilled & Grooved Combo* K426DS $144.00ea. &
EBC
Premium Rear Brake Rotor 253 x 20mm (all cars with rear disk) BRAKES
Rear Rotor- standard K425RA $45.00ea.

Rear Rotor- Cross-Drilled* K425RCD $89.95ea.
Rear Rotor- Grooved* (EBC Turbo Groove) K425RG $79.00ea.
Rear Rotor- Drilled & Grooved Combo* K425RDS $95.00ea.
BAT / Wilwood Brake Kits
We are happy to announce the release of
our 4 piston caliper brake kits for the Contour
and Cougar cars. These kits utilize high
performance Wilwood Billet Dynalite
Calipers with custom brackets and hardware
for installation. At just 4 pounds the Billet
Dynalite (with bracket & pads) is
considerably lighter than the standard
calipers 14 pound weight. This goes along
way to reducing "unsprung weight" benefiting
both braking and handling performance.
Dynalite Billet calipers are also
extremely rigid which directly
transfers torque without
unwanted caliper flex and the
larger piston area equates to
more clamping force. Calipers
are all aluminum construction
both for weight savings and
maximum heat dissipation and
are supplied in a attractive black
anodized finish with stainless
steel pistons and high
temperature seals installed. The
Dynalite series of calipers is also
very well serviced by the brake pad market with literally dozens of pad/compound options available and
pads change in seconds without the need to even remove the caliper (a big plus at the race track).
Kit Notes w/278mm rotor: Wheels of 15" or larger are required. Depending on brand of wheel, size/diameter, and
offset, a 5 to 10mm spacer may be required as the caliper may contact the wheel "spokes". Wheels in the 35 to
40mm offset range are less prone to problems. We have checked the stock 16" SVT 5-spoke (49et) wheels for fit
and they require spacers, but the ST200 & Focus SVT 17x7" (49et) wheels are no problem. Kit Notes w/300mm:
Wheels of 16" or larger requited. Depending on brand of wheel (size/diameter & offset) a 5 to 10mm spacer may
be required as the caliper may contact the wheel "spokes". Wheels in the 35 to 40mm offset range are less prone
to problems. None of the 49et wheels we have tested (ST200, 5-spoke SVT 16" & 17") fit without spacers.
BAT / Wilwood 4 Piston Caliper Kit* K416WC $459.00

*For cars already equipped with 278mm SVT type rotors or customer supplies rotors. Kit includes calipers,
pads, brake hoses & hardware.
BAT / Wilwood 4 Piston Brake Kit 278mm K416WK $589.00
(includes standard 278mm rotors calipers, pads, brake hoses brackets & hardware)
BAT / Wilwood 4 Piston Brake Kit 278mm K416WD $735.00
(includes cross drilled 278mm rotors, calipers, pads, brake hoses brackets & hardware)
BAT / Wilwood 4 Piston Brake Kit 300mm K416W3 $695.00
(includes 300mm rotors, calipers, pads, brake hoses, brackets & hardware)
As with most aftermarket high performance brake kits "these brake kits are not D.O.T. certified" and even though
thousands of similar brake kits are in safely in service on various makes and models of vehicles "they are designed
for off road use at customers own risk".
Large Rotor Brake Kits- Front
These kits allow fitment of larger (278mm) SVT front
brake rotors to cars normally equipped with standard
(260mm) rotors. Increasing rotor "swept area" in this
way will greatly improve stopping power (leverage) and
help to reduce high brake temperatures that can cause
premature brake fade and poor pedal feel.
Kits include: 278 x 24mm EBC sport (groove &
dimple) or standard front rotors, Mintex 1144 high
performance or MIntex A/F street front brake pad
set, custom caliper mounting brackets (utilizes
standard caliper) & assorted hardware (fitment with
most 15" wheels -some require slight modification) kits include
premium brake
BAT Big Brake Kit "A" K416A $499.50 rotors by
supplied with EBC groove/dimple rotors & Mintex 1144 competition pads
BAT Big Brake Kit "B" K416B $419.00
supplied with EBC standard rotors & Mintex 1144 competition pads &
BAT Big Brake Kit "C" K416C $349.00
supplied with EBC standard rotors Mintex A/F street pads
EBC
BRAKES
Focus SVT Brake Components

With the release of the Focus SVT comes a plethora of
performance parts just waiting to be swapped into other Ford
models. We have plans to incorporate Focus SVT 300mm
front rotors into a number of new brake kits we have in
development. As for now we can offer some of the
components to the DIY-ers out there who have been bugging
us to release the parts. Our future offerings will include
brackets to fit standard Contour type calipers and kits with
lightweight aluminum calipers.
Rotor Focus SVT 300mm (each) H426 $49.50
Pad Set Focus SVT Mintex A/F H417AF $59.00
Aeroquip Brake Hoses

These performance brake hoses incorporate a stainless braid
exterior over a teflon interior to keep line expansion "flexing"
to a minimum. This greatly reduces the "spongy" pedal feel
common with standard rubber brake hoses. Our stainless
lines are assembled from genuine Aeroquip AN-3 hose with
premium metric "reusable" (not the lesser quality "swagged"
type) hose ends installed. Front hoses fit all Contour models,
rears fit all with rear disk brakes (see model years) we also
include the special strut mount bushings.
Front Brake Hoses (pair) All Cars K419 49.50
Rear Brake Hoses (pair) 97-2001 K419R 49.50
Rear Brake Hoses (pair) 1995-96 K419RA 49.50
R. Brake Hoses (pair) 95-96 w/drum K419RD 49.50
R. Brake Hoses (pair) 97> w/drum K419RDA 49.50
123456789012
123456789012
123456789012
Suspension TECH 123456789012
123456789012
The European based Contour platform offers fairly competent handling right out of the box. This
makes it a excellent candidate for suspension modifications to make an already good car handle
even better.
Struts- we are currently importing sport tuned struts for the Contour/Cougar cars by the following
European manufacturers; Sachs/Boge, Spax, Bilstein and Koni. Most are European market products
designed for the Mondeo, which we have tested for compatibility (fit and performance) on the US
cars. See fitting notes below. Note: Cougar's use later 98-2001 Contour Struts.
Front Struts- are different on 95-97 (early) and 98-2001 (late) Contour/Mystique cars. Early strut
assemblies utilize a "pigtail" type spring, as located on lower perch. Later 98-99 strut assemblies
use an open wound spring (diameters same at top and bottom). For anyone considering swapping
springs between the model years, it is possible to use later 98-01 type springs with earlier 95-97
struts (the strut perch will allow the spring to seat well enough for proper function). Fitting early 95-
97 springs to late 98-01 struts is not recommended as the strut perch has no provision for the spring
"pigtail" end to seat. Swapping complete strut/spring assemblies between the model years is possible,
and has some benefits depending on application and brand of components being used.
Rear Struts- Although some manufacturers part numbers differ between early 95-97 and later 98-
99 cars, we don't see any real difference in the overall specification of the component. This means
swapping rear struts between early and late cars should not pose a problem.
Springs- It seems common these days that aftermarket springs are being purchased more for "looks"
than any road handling enhancement value. Lowering or "drop springs" are just that, they lower the
cars ride height for mostly aesthetic reasons. With spring rates very similar to stock (usually no more
than +10%), these springs are marketed for use on newer cars with O.E. (stock) shocks so the car will
look cool. The handling benefit to this type of spring is minimal. The lower center of gravity is a plus, but
the amount of body lean is still greater than optimum. BAT has developed a true sport spring application
for the Contour which combines both lowered ride height with increased rate for optimal performance.
Our spring applications are not suitable for use with standard O.E. shocks. For best results they should
be used with sport valved (increased rate) European type struts only.
Bushings- We have been involved in manufacturing our own line of urethane suspension bushing
products for over 15 years. We got involved purely by necessity as the recognize bushing
manufacturers had little interest in making small batches of bushings for the "non popular" Fords we
were interested in. So we invested in having moulds made and BAT currently offers a wide range of
urethane products for cars like Fiesta, Escort, Capri, Cortina, Merkur XR4Ti & Scorpio and now the
Contour. Our bushing products offer unequaled quality as we use only the finest materials. Shore-A
hardness Uniroyal 78-80 is our choice for precise control without harshness or noise. We have cars
that have been assembled with our bushing products and used (raced) for more than 15 years
without showing signs of wear or degradation.
Sway Bars- We recommend increasing the diameter of the rear bar only for better "balance". For this
we offer a 19mm bar upgrade for standard cars (normally equipped with 16mm), and a 21mm for SE/SVT
cars (normally equipped with 18mm). We do not recommend increasing the front bar diameter on front
wheel drive cars such as the Contour. Installing a larger front bar would increase understeer which would
not be desirable. The 19mm bars are European Ford imports, 21mm bars are a BAT produced item.
Urethane Sway Bar Clamp Bushings
One of the first suspension modifications you should make is also the
cheapest and the easiest. Our heavy duty urethane bar clamp bushings
replace the soft standard rubber bushes for quicker, more direct,
response to steering input. Theory being, some of the sway bars
effectiveness is wasted as bushing deflection. If this can be limited
more of the leverage is transferred making the bar more effective.
Front Bar Bushing 19mm (SVT only) K407BA $9.50ea
Front Bar Bushing 20mm (standard) K407BU $9.50ea
Rear Bar Bushing 16mm (standard) G408BU $6.50ea
Rear Bar Bushing 18/19mm (SE, SVT, Cougar) K408B $6.50ea
Rear Bar Bushing 21mm (BAT Bar only) K408BU $6.50ea
Sport Spring Sets
Our specially designed progressive rate -25mm (-1") sport
springs will minimize body "roll" while cornering and reduce
"dive" under hard braking. Low and stiff enough for maximum
handling benefit without sacrificing the overall comfort and
load carrying capability of the vehicle. Progressive springs
are designed to become stiffer (10-50%) as they are
compressed allowing for a smooth transition between (very
reasonable) straight line comfort and high performance
cornering. We can supply sport springs for both early (95-
97) and late (98 >) 4 and 6 cylinder Contours. BAT sport
springs are made from premium chrome silicone spring wire,
cold wound to exacting standards, meeting all ISO/TUV standards.
Notes: Sport springs require fitting struts with more rebound rate than
standard O.E. types offer. We offer a selection of European manufactured struts
that are suitable of the task. Lowering your cars ride height also adds negative
camber to the front suspension angles. This is usually not a problem and actually benefits
handling as long as the car is not lowered more than 1"- 1.5" (25mm-35mm). The Contour does not have
an adjustment to compensate for large changes in camber and excessive tire wear can occur with additional
lowering. Always have the front and rear realigned (set toe) after doing any suspension work.
Sport Spring Set 95-97 (6 cylinder) K414A $209.00 set
Sport Spring Set 98 > (all 6 cyl & SVT) K414M6 $209.00 set
Sport Spring Set 98 > (4 cylinder) K414M4 $209.00 set
NEW
Sport Spring Set 98-2000 (Cougar) K414C $209.00 set
ST24 Front Springs

These factory Ford European ST24 front springs are handy for
fitting late type (98 >) struts to early (95-97) cars (struts do not
normally interchange- read suspension tech section). Spring
rate is on the sporty side (similar to SE/SVT springs) ride
height is standard.
Front Spring ST24 (each) K414 $95.00
European Handling Kit

A "tuned suspension system" offers a matched components
engineered to work together for optimal performance. This is
what you can expect the BAT European Handling Kit which
easily takes a standard Contour (with performance wheels &
tires) to well beyond SVT handling performance levels (read
some customer comments below) and is also a great
enhancement for SVT's as well. Our complete suspension
package includes a set of German made sport valved gas
struts and matching BAT -25mm sport springs (see spring
section). The ride feel is very European, noticeably firm but
still compliant. No loose dental fillings here. Ride height is
reduced (-25mm), enough to maximize handling and atheistics
without totally sacrificing the load carrying capabilities of a
sedan type car. Additionally buying parts in this "kit" form
represents a cost savings over individual part pricing.
BAT European Handling Kit (95-2001 Contour) K400A $595.00

BAT European Handling Kit (98-2000 Cougar) K400AC $595.00
Read customer comments on the BAT European Handling Kit :

"The kit totally transformed my cars handling. I can't believe it is the same car." - Dave G. Cherry Hill, NJ (97
Contour LX)
"Much less body roll and greatly reduced dive under braking over the stock SVT suspension, it now just feels right" -
Ted W. Phila., PA (1999 SVT)
"The best modification I have made to my car" - Rick G. Sherman Oaks, CA (1995 Contour SE)
"Makes you realize how much better Ford could have made the SVT handle without any ill effects. The car now
has much better overall balance." - Dave F. West Chester PA (1998 SVT)
"I can't believe the amount of performance for the price. Kudos to BAT." - Robin P. Tarpon Springs FL (1998 Contour)
Euro Sport Struts

Made in Germany, and specially valved to our specifications, these struts
offer substantially uprated bump and rebound specification. The shock
valving is especially well suited for use with sport (stiffer) springs and will
also do wonders in place of the SVT's O.E. struts. If you are looking for a
high quality (yet affordable) gas strut to make your Contour handle up to its
full potential these are the ones to have. We are so impressed with the
performance of these struts we have made them the basis of our BAT
European Handling Kit (see above). Front struts utilize late type (98-2000)
spring pearch design but can be fitted to earlier (95-97) cars by using late
type front springs. Rear struts interchange without modidfication.
BAT Euro Sport Front Strut* (98 >) K401G $99.00 ea.
BAT Euro Sport Rear Strut* (all years) K402G $99.00 ea.
*struts also fit Cougar all years
Rear Sway Bars Contour/Cougar
For increased handling and better balance
(reduced understeer) we highly recommend
increasing the diameter of the rear sway bar. For
this we offer the 19mm European Mondeo rear bar as an
upgrade for the standard 4 & 6 cylinder cars (normally equipped with
16mm) and for the SE/SVT cars (normally equipped with 18mm) we
produce a custom 21mm rear bar. For maximum performance and ease of
installation, we supply the sway bars with urethane bushings. BAT sway bars
are the only aftermarket sway bars that exactly follow the original bar bend specifications and are equipped
with bushing limiters to keep the bar properly located (this is the main cause of noise and why some aftermarket sway
bars often destroy the mounting clamps). weight specification 19mm bar @ 5.5 lbs., 21mm bar @ 7.4 lbs.)
Rear Sway Bar 19mm w/bushings K408 $89.00
Rear Sway Bar 21mm w/bushings K408A $109.00
Many owners are concerned about the possible alignment
12345678901
12345678901 issues that go along with lowering a vehicles ride height. We
Suspension TECH 12345678901
12345678901 warn against using springs that lower so much that the
12345678901 alignment will be out of specification even after adjustment
causing adverse tire wear. To elaborate on this issue we tested
Alignment Specifications (front) a 1997 Contour with a BAT European Handling Kit. The
Specified Range Before After Adjusted "before" spec. is prior to modification, "after" is with the kit
0 0 0 0 0
installed, and "adjusted" is after alignment is optimized,
-1.7 to .08 camber 0.05 -1.20 -1.25 "specified range" is what would be considered an acceptable
0 0 0 0 0
1.3 to 3.3 caster 1.8 1.8 1.8 specification range. As ride height is lowered camber changes
0 0 0 0 0 0 0 0 0
-0.17 to 0.00 toe -0.05 (-0.37 ) -0.09 from (-0.02 to -1.20 ) and toe changes from (-0.05 to -0.37 ).
Even with the ride height reduced 1.15" the test car is still
0
within camber tolerance at (-1.20 ). Camber is non adjustable
0
Alignment Specifications (rear) and it is important to stay within the maximum of (-1.7 ). The
0
toe spec (-0.37 ) is well out of range but is easily adjusted to
Specified Range Before After Adjusted 0
(-0.09 ) toe out. Camber also changes slightly with the toe
0 0 0 0 0 0
-1.4 to 0.6 camber -0.03 -0.09 -0.10 adjustment to (-1.25 ). In the rear the toe is again affected by
0
0.04 to 0.24
0
toe
0 0
0.15 (0.31 ) 0.16
0 the lowering to an out of specification (0.310 ) which is adjusted
back to an average of the standard range at
0
(.016 ). As the data confirms using the properly matched
suspension components yields both maximum handling
benefit without any adverse alignment issues.
Sachs Super Gas Struts

Premium quality Sachs Super Gas struts include such features as
large diameter induction hardened full chromium plated piston/rod,
for improved heat dissipation and reduced friction. Dual lip seals
for leak-proof performance. Variable automatic multi-stage valving
for superior ride dynamics for all driving styles. Great features and
a limited lifetime warranty team up to make the Sachs Super Gas
struts an excellent strut for the money. Fronts fit 4 & 6 cylinder early
cars (1995-97) or late (1998-2001). Rears suit all models (1995-2000).
Front Sachs Super Gas Strut (95-97) K401S $79.00 each

Front Sachs Super Gas Strut (98-2001) K401SA $79.00 each
Rear Sachs Super Gas Strut (95-2000) K402S $79.00 each
European ST200 Strut Sets
For anyone looking for performance on a budget we have acquired a quantity of Motorcraft European
specification Mondeo ST200 struts. These have fairly sporty valving,
similar to what was used on the SVT cars in this country. Struts are
high quality German units made by Sachs to Ford specification.
UT
If your SVT is feeling a bit mushy with age or you want to upgrade
O
a standard 4 or 6 cylinder Contour or Cougar these would be a
LD
great choice. The best part is the price...how's $224.50 for a
O
set of 4 !!! That's almost like buying 2 shocks and getting
S
the other 2 for free. What a deal. Notes: all struts sold as
sets of 4 only, struts are designed to fit 1998-2001 Contour
or Cougar cars (but could be fitted to earlier cars by fitting late
model front springs or spring sets designed for later 1998 > cars.)
Motorcraft ST200 Strut Set (4) K400M $
Bilstein Struts
Anyone familiar with the name Bilstein would most likely associate
them with the high dollar "Rallye" series (yellow color) inverted
piston mono tube dampers they have been offering for years.
By designing a series of more traditional twin tube gas struts
Bilstein is attempting to bring high quality German manufactured
struts and shocks to the masses, that is if you are fortunate
enough to drive a vehicle that is worthy of their attention. We have
been pestering our Bilstein representative in Europe for over a year
now and finally have some of their new, and more attractively priced,
product available for sale. New "T/C Series" struts offer genuine Bilstein
technology, and quality, with features like twin tube high pressure gas
pressure design- for precise handling and control, hard chrome piston
rod, multi stage valving with self adjusting piston, and performance that
exceeds all original equipment specifications. After testing these new Bilstein's on
a couple of different Contours we are pretty impressed. First we installed a set on a
1996 SE thinking the combination of the SE's fairly stiff stock springs and the high pressure valving
would be a nice complement. You will note that there are very few applications on front struts for these
early cars and these Bislteins paired with the SE springs worked tremendously well together. We then
did a similar install on a SVT, and like the SE had very good results with the stock springs. The car was
noticeably more firm and well controlled. For the last test we matched the Bilsteins with our BAT -
25mm sport springs to get a feel for their maximum potential and they did not disappoint. Again the car
felt very well balanced, but with even less body roll and dive (more a benefit of the springs). There you
have it, whether you are looking for top quality performance struts to upgrade a standard car, or something
to match up with aftermarket sport springs these Bilsteins are an excellent choice.
Bilstein Strut Front 1995-97 K401B $122.50
Bilstein Strut Front 1998 > K401BA $122.50
Bilstein Strut Rear (all years) K402B $122.50
Make it a Sport Kit Package 4 Bilstein struts (front & rear) with a set of BAT sport springs for the
ultimate handling performance and get a discount price over buying the parts individually.
Sport Kit (F & R Bilstein struts w/BAT -25mm sport springs) K400B $659.00
Struts
BAT is one of a select few distributors of Spax manufactured performance
suspension components. At this time Spax "V" (non adjustable) sport
struts for the early 95-97 cars and late 98 > cars are avaialble. The
Spax "V" series gas strut/shocks offer a combination of
performance valving (nonadjustable), shortened rod length (allows
for use with lower springs) and a very affordable price. Over the
years we have put hundreds of sets of "V" struts in service for
other Ford vehicles and have found them to be extremely reliable.
The adjustable Spax "TA" type gas struts offer performance valving
(24 way top adjustable), shortened rod length (allows for use with lower
springs) and should be available spring/summer 2002.
Spax Sport Front Strut (Contour 1995-97) K401V $87.50ea
Spax Sport Front Strut (Contour/Cougar 1998 >) K401VA $97.50ea
Spax Sport Rear Strut (Contour/Cougar all years) K402V $87.50ea
Spax Adjustable Front Strut (Contour 1995-97) K401A TBA

Spax AdjystableFront Strut (Contour/Cougar 1998 >) K401AA TBA
Spax Adjustable Rear Strut (Contour/Cougar all years) K402A TBA
Make it a Sport Kit Package 4 Spax struts (front & rear) with a set of BAT sport springs for the
Sport Kit Contour (F&R Spax "V" Struts w/BAT Sport Springs) K400S $569.00
Sport Kit Cougar 98-2000 (F&R Spax "V" Struts w/BAT Sport Springs) K400SC $569.00
Sport Kit Contour (F&R Spax Adjustable Struts w/BAT Sport Springs) TBA
Sport Kit Cougar 98-2000 (F&R Spax Adjustable Struts w/BAT Sport Springs) TBA
Koni Struts
Preimum quality Koni twin tube low pressure gas struts with the external
top "knob" for adjustment for Contour and Cougar. We supply the
yellow "Sport" versions which have up to 50% more rebound
compensation over the standard red "special -D" units making them
well suited for use with stiffer sport type springs on cars being used
for light competition applications (auto-x, track events).
Koni Front Sport Strut 95-97 K401K $168.50 ea.
Koni Front Sport Strut 98 > K401KA $168.50 ea.
Koni Rear Sport Strut (all years) K402K $168.50 ea.
Make it a Sport Kit Package 4 Koni struts (front & rear) with a set of BAT sport springs for the
Sport Kit (F & R Koni struts w/BAT sport springs) K400K $849.00 kit
Front Strut Brace Contour/Cougar

This nicely designed OMP front strut tower
brace is just the thing for stiffening up the front
chassis on your Contour or Cougar. Brace end
plates bolt directly to the strut towers linking
left and right sides and allow for loading
adjustment with R/L thread turn buckle and
lock nuts. This type of bar actually works quite
well (unlike the ones that attach to the strut
top nuts and damage the struts) and can be
fitted in minutes. Installation only requires
drilling a few holes and using supplied self-
tap fasteners. Bar is supplied in a durable
epoxy paint finish with hardware. One
installation tweak is if you have the front struts off the car (so that the underside of the tower is
accessible) use nuts, bolts and washers for a slightly more secure mounting, but the standard
screw mounting will work for most installations. Supplied color is either yellow or red based on
manufacturers supply.
Front Strut Brace Contour/Cougar K403F $124.50
Rear Strut Brace Cougar ST200

Ford did make a small number of ST200 Cougars for the European market, but no one knows for sure
if these beautiful rear strut tower braces ever made it on the production cars. These are a factory part
with Ford numbers and markings, but strangely none of the components are referenced on any microfiche
(either here or abroad) and car owners say their ST Cougars did not come with one installed. Maybe
these bars were supposed to be
a dealer installed accessory that
was never approved, who
knows? What we do know is
all the components are
extremely well made, if
not over engineered.
Bar installs across the
rear strut tower and
cross braces down to
secure floor mounting that
attach to the floor and lower
strut towers. All fastening points include stiffening plates. These bars would cost hundreds of dollars to
reproduce if you could even entertain doing the stamping for the mounts and plates. If you are serious
shoring up your Cougar's rear suspension and want the absolute best rear strut available this is it. Note:
bars are now supplied with hardware.
Rear Strut Brace Cougar ST200 K403RC $279.00
Upper Strut Mounts
The perfect time to replace the upper strut mount insulators
is when you are changing the struts. Cars with over 60,000
miles can definitely benefit with a fresh set. We offer quality
European made replacements that will do the trick and at a
discount price you can afford.
Upper Strut Mount Front (each) K404F $29.50

Upper Strut Mount Rear (each) K404R $32.50
Rear Strut Brace

Simple and effective tubular steel brace helps tie right and left rear shock
towers together for enhanced rigidity. Bars are made from 1" seamless
tubing with 1/2" opposite handed rod ends to allow for easy
installation and preload adjustments. When making
suspension modifications one should consider a brace
to reduce the chance of chassis flex due to
increased cornering loads. Supplied in a
durable gloss black powder coated finish.
Fits all Contour & Cougar models.
Hardware included.
Rear Strut Tower Brace K403R $129.00
Adjustable Front Camber/Caster Kit

There is only limited adjustment for alignment (toe only) on the Contour cars. Incorrect alignment
specifications cause accelerated tire wear and less than desirable handling characteristics. Vehicle
lowering beyond recommended ride height, setting up a car
for competition use, adjusting for left/right variation, and
correcting collision damage are all valid reasons for
needing adjustable camber/caster; which as stock the
Contour does not offer. We offer these handy kits which
use a offset eccentric top mount and plate design for
precise camber and caster adjustment. Once installed,
adjustment is made by removing the top plate lock and simply
inserting a 3/8" rachet and extension into the top plate and
turning (with the weight off the suspension). Caster and
camber relation will be determined by the location of the strut
shaft and is infinitely adjustable within a range, depending on
position it is possible to change camber (only), caster (only) or a
combination of camber and caster. Kits are sold each, one is kit required per side. It is possible to
use only one side especially when correcting for tolerance issues.
Adjustable Front Camber/Caster Kit (each) K423F $74.50
Suspension Components
Some early Contours have racked up high mileage and are in need of replacement suspension parts. Others
might require new components due to collision damage. Larger wheels/tires and more aggressive driving can
also take its toll on parts. Suspension products for Euro Fords are our specialty. We purchase them in large
quantities so that we can offer you the absolute best prices. All suspension parts European manufactured and
meet all TUV and ISO standards so you can be assured you are receiving the highest quality.
pC
pE
pA
pB
pD
p A Inner Tie Rod End -ball and socket joints can be prone to wear with time, same left or right. Rods
differ slightly depending on what wheel size came on the car originally.
Inner Tie Rod End (L & R same) 14" wheel K434T $24.75
Inner Tie Rod End (L & R same) 15 & 16" wheel K434TK $24.75
p B Outer Tie Rod End -handed left (driver) and right (passenger), nyloc nuts included. The parts look
very similar, but there is a year break on this item.
Outer Tie Rod End (LH) 1995-96 K434L $18.50
Outer Tie Rod End (RH) 1995-96 K434R $18.50
Outer Tie Rod End (LH) 1997-2001 K434LA $18.50
Outer Tie Rod End (RH) 1997-2001 K434RA $18.50
p C Front Sway Bar Link -these really take a beating and can attribute to front sway bar noise. Same left
and right 2 per car. Ours are an upgrade over standard Ford units.
Front Sway Bar Link K407L $17.50
p D Ball Joint -tend to show wear with time and mileage or the boots rip letting the grease leak out and let dirt
in. Ball joints are riveted on the end of the control arm but can be removed by drilling rivets or using a air chisel.
New ball joints are supplied with hardware (nuts, bolts & washers) to reattach.
Ball Joint (L & R same) K428 $19.50
p E Control Arm Assembly -handed left (drivers) right (passenger) these are complete assembled control arms with
front & rear bushings and ball joint. We have seen cars with mileage as little as 50,000 with significant bushing and ball joint
wear. The Contour and Cougar use one of two types of lower arm with either horizontal or vertical bushings. Early cars (prior
to 1998) use the horizontal type bush, but later cars are a mix of either or depending on the type of lower crossmember
installed at the time of manufacturer. Best check before ordering. The horizontal bush arms mount with 4 fasteners (2 at
each end of the bush) and the vertical bush arms use 2 long bolts (1 per bush) through the middle of the bushing.
Control Arm Horizontal Bush (LH) K428L $169.50
Control Arm Horizontal Bush (RH) K428R $169.50
Control Arm Vertical Bush (LH) K428LA $55.00
Control Arm Vertical Bush (RH) K428R A $55.00
The Contour is a unique application for road wheels.

They are designed for use with (hub-centric) wheels in
a 38-50mm offset- not the most common application in
the states. We import factory Ford European Ford "Rally Focus SVT 5-Spoke 17"
Sport" brand wheels, or supply proven aftermarket
Focus SVT 5 spoke 17 x 7" alloy wheels offer original
brands that we know fit the car properly.
Ford quality at a price that can't be beat. Supplied in
6-Spoke R/S Wheel Advanced styling with flat flush spokes, bight silver metallic flake finish. Specs: 17" diameter,
silver color- clear coat finish for added protection, locking 7" width, offset (et49), weight 21 lbs, center cap
center cap w/ R/S logo. included. Alternate colors: black, white & chrome.
6-spoke R/S Wheel (available sizes) SVT 5-Spoke- silver H411S $125.00 ea
(15" x 7" , 16" x 7") $209.00 each SVT 5-Spoke- black H411SB $150.00 ea
SVT 5-Spoke- white H411SW $150.00 ea
SVT 5-Spoke- chrome H411SC $250.00 ea
5-spoke Cosworth Wheel

Original equipment on Cosworth Escort- optional on Mondeo
in Europe (similar to 1998 SVT wheel) silver color- clear coat
Euro-Edition Wheel 17" finish for added protection, center cap w/ Ford oval.
Offered on some 2003 SVT's and known as the "Euro 5-spoke Cosworth Wheel (available sizes)
Edition" wheel. Similar to European ST170 wheel, but (15" x 6") $195.00 each
in a dark grey (argent) color rather than silver, and (16" x 6.5", 16" x 7") $209.00 each
without large center cap that covers the lug bolts. Specs:
7-Spoke "Soft Effect" Wheel Flush spoke, silver color-
17" diameter, 7" width, offset (et49), weight 21 lbs, center
clear coat finish for added protection or optional chrome
cap included. Alternate colors: black, white & gold.
finish, locking center cap w/ Ford oval.
SVT Euro Wheel- argent H411E $125.00ea 7-spoke "Soft Effect" Wheel (silver) available sizes
SVT Euro Wheel- black H411EB $150.00ea (15" x 6", 15" x 7", 17" x 7.5") $209.00 each
SVT Euro Wheel- white H411EW $155.00ea 7-spoke "Soft Effect" Wheel (chrome) available sizes
SVT Euro Wheel- gold H411EG $150.00ea (15" x 6", 15" x 7", 17" x 7.5") $309.00 each
4 Spoke "Turbo" Wheel 2004 SVT Wheel 17" 2 x 4 Spoke Wheel

Stylish 4 spoke "Turbo" wheel available Latest style 2004 Focus SVT 6- Stylish 2 x 4 spoke wheel available
in 16" diameter with either a 6" or 6.5" spoke alloy wheels offer original in 16 & 17" diameters from 6.5" to
width. Finish is bright silver. We highly Ford quality at a price that can't be 7.5" widths. Finish is bright silver. We
recommend these factory Ford wheels beat. Supplied in bight silver highly recommend these factory
for guaranteed quality fit and finish. metallic flake finish with black SVT Ford wheels for guaranteed quality
Center cap included. logo center cap. Specs: 17" fit and finish. Center cap included.
diameter, 7" width, offset (et49), Available Sizes:
4 Spoke "Turbo" Wheel weight 20.5 lbs, center cap included. 15 x 7" $209.00
16 x 6" $195.00 2004 SVT 17 x 7" Wheel 16 x 6.5" $209.00
16 x 6.5" $195.00 H411S4 $135.00 ea 17 x 7.5" $209.00
ST200 Wheel 17" Focus R/S Wheel 18" ST170 Wheel 17"
Factory equipment on the Mondeo Factory Focus R/S Turbo wheel. Focus ST170 17x7" (et49) 15
ST200 these stylish 14 spoke wheel Supplied in bight silver metallic spoke alloy wheels.Finish is
available in 17" diameter with a 7" finish with white R/S logo center metalic silver with a brushed
width (et49). Finish is bright silver. cap. Due to increased wheel offset, stainless look center cap & blue
We highly recommend these factory and width, wheel arch modification, Ford oval. Again it is hard to
Ford wheels for guaranteed quality and or, flairs might be required. beat factory Ford wheels for
fit and finish. Center cap (bright Specs: 18" diameter, 8" width, looks fit and quality finish.
finish) included. offset (et42), center cap included. Weight 20.5 lbs.
ST200 Wheel 17 x 7" Focus R/S 18 x 8" Wheel ST170 Wheel 17 x 7" w/cap
$209.00 each H411RS $210.00 ea $224.00 each
12345678901
12345678901
Air Filter TECH 12345678901
12345678901
12345678901
The standard air box and filter, with it's various baffles and mufflers,
is more designed for quiet operation than efficient airflow. Replacing
the standard air filter with some type performance filter offers the
maximum "bang for the buck" and should be considered as the first
performance upgrade for your vehicle. For this we offer a wide selection
of options. First is a simple drop-in free flow panel filter that replaces
the standard filter in the stock air box and is best for owners who
require a completely stock appearance for emissions inspections or
warranty issues. These performance panel filters use a free flow
cotton/gauze type element offering increased filter area which are
cleanable and should last the life of the vehicle. You can increase the
airflow to the airbox, when using this type of filter, by removing the
baffle/muffler from the inside the fender. BAT Standard Cone Filter Kit
There are a number of filter kit options that replace the stock air filter and box by attaching a filter directly to the
airmeter. These filter kits use either cone shaped cotton/gauze or formed multidimensional foam element.
Both types less restrictive (free flow) with more filter area over the panel type filter, and can be cleaned for long
life. There have been recent articles claiming these air filters perform poorly certain types of cars. This can be
true as some engine compartments have very high under hood temperatures, combined with poor air flow and
inefficient inlet plumbing to the manifold. Fortunately the Contour
is far from the worst case scenario. It benefits from a short direct
inlet tract to the manifold, the filter location is away form the major
heat emitting components and the under hood airflow is more than
reasonable. Under normal conditions (driving 20 mph or greater)
the under hood air being supplied to the engine is likely to be
within 5 degrees of ambient. On the Contour these cone or foam
filters do offer a tangible increase in performance which can be
further enhanced by removing the fibrous sound insulation from
under the hood. This will help air circulation and help reduce under
hood temperatures. We are working on a kit with pre-cut self
adhesive heat resistant panels that stick under the hood offering
BAT Reverse Cone Filter Kit better sound insulation and heat management (available Fall 2001).
How can you make the cone filter concept better? Adding cooler more dense air to the engine will increase
performance. This is why you will see all kinds of adaptations with insulated pipes, filters in boxes, filters
mounted in fenders and other sorts. On the V6 Contour insulating the inlet tract is not worthwhile as it is very
short. Remote mounting the filter just makes it get dirty real fast
(requiring constant cleaning) and dirty filters have reduced airflow.
Our approach was to leave the filter under the hood where it is
better protected from water and excessive dirt and simply pump
remote air from the lower grille via a flexible hose directly to the
filter. This required a custom filter designed with an internal air flow
"shape" in the reverse cone end of the filter. Working like a diffuser
on the inlet of a jet engine, this "shape" helps keep the air flow
more laminar effectively smoothing and speeding the air entering
the inlet tract through the filter. With our remote air filter kit now it is
possible maximize cone filter concept without any drawbacks.
Take your pick we have a filter kit to suit any requirement. Check DCAF Reverse Cone Filter Kit
the next few pages for more air filter and related components. w/remote air option
Air Filter Kits
We are pleased to announce our new line of high performance cone air filter kits and components for the V6
Contour cars. This range of filters has options from fairly basic types (highly functional & inexpensive) to higher
end filters which incorporate new design features like internal air flow enhancing shapes and remote air
connections. These filters yield very tangible effects for a minimum cost and can be made even more effective
when combined with exhaust upgrades or other efficiency type modifications.
Performance Cone Air Filter Kit

This is a great performance air filter kit at a price everyone can afford. The BAT Performance
Filter Kit combines all the components needed to replace the stock air box/filter on V6
powered Contours and Cougars with a free flowing cone type filter. Benefits with this
type of cotton gauze filter are reduced air restriction, increased filter area and repeat
clean-ability (filter should last a lifetime). As stated elsewhere in our "filter tech" section,
these filters offers plenty of bang for the buck and should be considered
as a first modification. Kit includes: cone filter w/mounting clamp, air meter
filter adaptor, gasket & mounting hardware. Note: cars with inlet air
temperature (IAT) sensor in the stock air box (non SVT's) require K22R
- IAT Relocation Kit (see below).
Performance Cone Air Filter Kit K22C1 $69.00
Air Filter Clean / Re-oil Kit M22C $9.65
Reverse Cone Air Filter Kit
Similar to the above basic cone filter kit but with a reverse cone filter on the end offering slightly
more filter area and air flow capacity. Kit combines all the components needed to replace the
stock air box/filter on V6 powered Contours and Cougars with a free flowing cone type filter.
Benefits with this type of cotton gauze filter are reduced air restriction, increased filter area and
repeat clean-ability (filter should last a lifetime). Kit includes: cone filter
w/mounting clamp, air meter filter adaptor, gasket & mounting hardware.
Note: cars with inlet air temperature (IAT) sensor in the stock air box
(non SVT's) require K22R - IAT Relocation Kit (see below).
Reverse Cone Air Filter Kit K22C2 $89.00
MAF Gasket MAF Adaptor IAT Relocation Kit

If you have purchased some other For anyone interested in Required for use with most air filter
brand of air filter kit and want to use engineering their own air filter conversions on non SVT cars this
the stock "diffuser" screen we can installation we are happy to supply kit relocates the IAT sensor from
supply the proper gasket. The our high quality machined the filter box to the air inlet hose.
diffuser (F4ZZ-9E931-A) is used aluminum air filter adaptor. Kit joins two of the vent lines with
between the filter and air meter on Attaches directly to the air meter a tee and frees up a port so that
SVT's and can be fitted to all V6 cars. and fits any brand 85mm I.D. filter. the sensor can be fitted.
Gasket MAF K22G $5.00 Filter Adaptor K22M $39.00 ACT Relocate Kit K22R $2.50
Air Filter Kit w/Remote Air
The DCAF Performance Air Filter Kit takes the cone

filter to the next level of performance (more in the
filter tech on page 18). This well designed kit uses
a premium high flow cotton gauze reverse cone filter
incorporating a remote air hose attachment. A
rugged 1 meter (3.3 foot) 70mm (I.D.) flexible hose
connects to the filter and is routed through the
fender well opening, forward down the inside of
the wheel well to a location in the front lower grille
area (see below left). Air is supplied directly into
the “reverse cone” end of the filter so that reduced
air inlet charge temperatures can be realized. The
engines requirement for air depending on throttle
application and vehicle speed will dictate the amount
of air that is either supplied by the main filter cone or remote air supplied from the reverse cone end
of the filter. Once the car is under way a smooth transition between air supplied from under hood to
remote (cooler) air takes place. In testing we found that sometimes supplying remote air to the filter
can cause problems. A boundary effect can occur when warm and cold air collide within the filter and
positive air pressure can build up when the throttle is closed. This can
stall the air flow causing a stumble in performance
as the engine corrects. The DCAF filter kit
addresses these problems by adding an
airflow "shape" in the reverse cone end of
the filter (see photo at right). Working like a
diffuser on the inlet of a jet engine, this
"shape" helps keep the air flow more
laminar. This effectively both smooths and
speeds the air entering the inlet tract through
the filter. We are confident you will be impressed
with both the quality of the kit components and
performance of the kit as a whole. The remote air hose is very flexible
and is easy to route with enough length to reach the lower center grille
area, fog lamp hole (if not equipped with lamp) or just about anywhere
in the front of the vehicle. We also supply a special gasket
for between the MAF adaptor and air meter so that the air
diffuser screen can be retained on the SVT. On the road
engine performance is noticeably enhanced with quicker
throttle response, better pick up (acceleration), and a nice
aggressive induction sound.
Filter kit includes: reverse cone filter with DCAF technology,
MAF air filter adaptor & gasket, mounting bracket, flexible
remote air hose w/connector and clamps.
Air Filter Kit w/Remote Air K22C3 $165.00
Air Filter Clean / Re-oil Kits M22C $9.65
K&N Panel Type Air Filters
A quick and easy performance modification is to replace the standard
panel type air filter with a direct fit K&N high performance air filter.
Premium oiled cotton gauze filter material offers low restriction and will
not clog as quickly as standard paper elements. K&N elements are
unaffected by moisture and can be cleaned and re-oiled over and over,
making it the filter the last filter you will need to buy. Filter for SVT is new
for 2002 and has the factory type "nose cone" end.
K&N Air Filter (4 Cylinder) K22P1 $43.50
K&N Air Filter (V6 -not SVT) K22P2 $43.50
K&N Air Filter (V6 Cougar) K22P3 $42.00
K&N Air Filter (SVT) w/cone shape end K22P5 $58.25
Air Inlet Pipe

We now offer a large diameter air inlet pipe that replaces the rubber bellows between the air meter and
throttle body on the V6 Duratec engines. Not only does our Air Inlet Pipe look nicer (Jet-hot coated silver)
but it does have better airflow characteristics than the stock rubber part. Air
pipes are designed to fit the SVT with either standard air filter or
aftermarket cone type filters. These may also be fitted to non SVT cars
with V6, however, one of the ports is not used (requires a plug) and they
will not fit with the stock air box (only aftermarket filters). When using our
ITG air filters (see above) a slightly shorter 100mm element is
required for proper fit. Silicone hose and clamps are included
with Air Inlet Pipes. Note: pipes are redesigned (as of 9/01)
with a larger port for the ACT sensor which puts the sensor in
the air stream and simplifies installation. The other item
pictured is our stainless flex-tube air supply hose that connects
from the air pipe to the IAC valve which makes the whole
installation a bit cleaner by elimination the bundle of original
hoses and the baffle/muffler found on some cars. Note: not all cars can have the standard IAC air hose and
baffle/muffler removed without a unwanted "moaning" sound coming from the inlet tract.
Air Inlet Pipe (SVT) K22A $75.00
Air Supply Tube/Hose K22E $9.00
Ignition Wire Sets

We recommend Magnecor brand ignition wire sets for superior quality,
performance, and durability. Forget all the advertising hype from the
ever growing list of ignition wire merchants about their wire sets making
additional power, voltage, whatever. When it gets down to quality
Magnecor sets the standard. We have put hundreds of these wire sets
into service on various Ford engines and have yet to have any problems
with premature wear. Cables are supplied in 8.5mm diameter, red in
color, standard length, with factory boots for guaranteed exact fit.
Ignition Wire Set (2.0L 4 Cylinder) K9HT $85.00
Ignition Wire Set (2.5L 6 Cylinder) K9HT6 $124.50
Ignition Wire Sets V6
As a budget alternative to the Magnacor wire sets we have been happy
with the performance and quality of the Ford Racing ignition wires by MSD.
They are custom length 9mm high temp wires with factory boots and
connectors and are available in selected colors, blue, red & yellow. Ordering
notes: add B for blue, R for red, Y for yellow after part number. Example
K9HM-B is a wire set for V6 engine in blue color. Cougar V6 after 2001
uses a different coil wire end which are not available on these sets.
Wire Set Ford Racing 9mm (2.5 6cyl*) K9HM- _ $47.50

*not for 2002 Cougar
4 cylinder coil wire ends

Ignition Wire Sets 4 Cylinder
As above but for 4 cylinder applications. Please see the photo (left)
to help identify your coil wire conector type. Ford has used both
types after the 1998 model year. Ordering note: add B for blue,
R for red, Y for yellow after part number.
Wire Set Ford Racing 9mm (2.0 4cyl*) K9HZ- _ $37.50
*coil wire end with retaning clips
H9HM K9HZ Wire Set Ford Racing 9mm (2.0 4cyl*) H9HM- _ $37.50
Focus Contour/Escort *push-on coil wire end, NO retaning clips
Spark Plugs
Motorcraft Platinum plugs are still the best performance choice
for use in the Duratec V6 engines. With a broader tip than most
wire electrode type performance plugs, Motorcraft Platinums
provide longer service life with a reduced chance of fouling.
Spark Plug Motorcraft Platinum (22FS) K539 $8.45 each
Dual Mass Crank Damper

Used on the latest Mondeo 2.5L V6 Duratec engines these "Dual Mode
Dampers" reduce vibrations at a more than one frequency. The part looks
much like the standard crank damper with a second mass ring pressed on
the front, hence dual mode (two dampers). When installed the final result
is really quite amazing. The engine feels smoother and more refined,
especially above 4000 RPM where the secondary mass comes into play.
We would recommend this part to anyone who uses the upper part of the
rev range on a regular basis and wants to help extend their engines
longevity. As far as piece of mind goes, if Ford decides re-engineer a part
it might be to address a possible problem which in this case makes
upgrading even more worthwhile. Replace the belt when installing the
damper- our price on replacement drive belts can't be beat at only $14.00.
Dual Mass Crank Damper (V6 Duratec) K5DM $88.50
Attatching Bolt for Damper K5B $3.95
Serpentine Drive Belt K6G $15.00
BAT Inc. 7630 Matoaka Rd. Sarasota, FL 34243 (941) 355-0005 fax (941) 355-4683
SVT/ST200 Upper Intake Manifolds
These are the "dual honed" versions used on the 205hp rated engines and are perfect for improving
performance on standard (non SVT) V6 engine. Get them while you can
because quantities are limited and our price is
SO
more than 50% off Ford retail. We can
LD
also supply the "ST200" stick-
o n logo/emblems (not
OU
supplied with manifold)
T
in black with brushed
stainless lettering and blue
Ford oval (see below). Note: when
fitting manifolds on non SVT
applications a number of other parts are
required for installation. Items like a 65mm SVT
throttle body, throttle bracket, throttle cable, TPS plug,
and assorted gaskets, can all be obtained at the local Ford dealer.
SVT/ST200 Upper Intake Manifold K515 $XXX.XX
ST200 Manifold Logo/Emblems

If you want to dress up your new manifold we can also supply the matching "ST200" stick-on logo/
emblems in black with brushed stainless lettering and blue Ford oval. Size is approximately 1 x 9".
Inlet Manifold Logo/Emblem "ST200" K515S $4.95
SVT/ST200 Lower Intake Manifolds

Late production (2000-2002) SVT/ST200 lower intake manifold assemblies with 34/35mm
throttle bores and "green" fuel injectors. Use to upgrade earlier SVT's with smaller
32/33mm manifold or standard V6 engines with 31/32mm lower manifolds.
Match up with SVT upper manifold for maximum performance. Manifolds
are supplied completely assembled with fuel rail for either return-
less (single fuel line 1999-02) or return fuel system (two fuel
lines 1998-99). Return type manifold is less expensive, so
one could reuse their existing return fuel rail and save some
money. Non SVT engines can substitute "beige" 17lb
injectors (see next page) or buy six (1U2Z14S411BPA)
injector pigtails to plug in the later green injectors (air
meter re-calibration required). Our deal on lower
manifolds is really quite a bargain considering Ford
retail is more than $800.00. Supply on both types of return-less type shown
manifolds is in decline, get them while you can.
Lower Intake Manifold (RETURN-LESS) Type K515L $395.00

Lower Intake Manifold (RETURN) Type K515LA $295.00
High Performance Engine Fasteners
ARP, the worlds leading manufacturer of high strength engine
fasteners now offer some components for the 2.5L Duratec V6
engines. ARP head stud kits in grade 8740 chrome molly, heat
treated to 200,000 psi tensile strength, assure proper cylinder
head sealing under even the most severe applications. For
increased bottom end reliability again use ARP 8740
chrome molly 200,000 psi fasteners on the main caps to
reduce the chances of crankshaft flex and cap fretting.
Head and main stud sets are supplied complete with
aerospace quality precision threaded nuts and parallel-
New ground washers.
ARP Head Stud Set K2DS $239.00

ARP Main Stud Set K2KS TBA
Replacement Fuel Pumps

For various reasons V6 engine equipped cars have quite
an appetite for fuel pumps. Burn one up and expect to New
pay 175.00 to 200.00 for a replacement assembly. We
purchased a quantity of the electric pump portion of the com-
plete "fuel pump-fuel level sensor assembly". This way you can
replace the portion of the assembly that goes bad (the pump) and save
some money. Pumps are available for both "return" 1997-1999 and
"return-less" fuel system 1999 and later 2.5 V6 Contour, Mystique and
Cougars. Pumps are genuine Ford and include new strainer/filter pick-
up. We are currently checking to see if the 97-99 return type pump will
fit the earlier 1995-96 cars and should have more news later.
Fuel Pump & Strainer 1997-99 (Return System) K10A $74.50

Fuel Pump & Strainer 1999 > (Return-less System) K10B $74.50
Replacement Fuel Injectors

Depending on conditions, fuel injectors start to show some
New diminished performance after 50,000 miles of use. It would
be nice to replace them with the other items that are generally
serviced at that mileage (plugs, ignition wires, fuel filter).
Only real problem to that thinking is cost. From Ford at
$50.00 each, replacing all 6 can become expensive. We
can help by offering brand new injectors at a sensible price,
allowing most owners replace worn injectors without racking
up a serious bill. These genuine Motorcraft 17lb (beige color)
EV6 type injectors fit all 1998 and newer (non SVT) 2.5L V6
engines.
Fuel Injector 2.5L V6 17lb K7G $19.00ea
We are in the process of adding
engine rebuilding components
for the Duratec 2.5L and 3.0L
V6 engines to our inventory.
When it comes to gaskets, Fel-Pro is the most
respected name in the field, pioneering
innovations like Perma-torque head gaskets
and Perma-dry high temperature moulded
seals. Find out why most engine builders insist
on Felpro quality.
Full Gasket Set includes K15B (top) and
K15CS (bottom) sets- all gaskets & seals for
complete engine rebuild K15A $348.50
Top End Gasket Set includes head gaskets
K15DL/DR, intake set K15FS, valve cover set
K15E, valve stem seals K3G- all gaskets & seals
for top end rebuild. K15B $279.00
Bottom End Gasket Set includes gaskets &
seals to rebuild lower end (short block).
K15CS $79.25
Head Gasket (LH) K15DL $62.50
Head Gasket (RH) K15DR $62.50
Head Bolt Set K2D $24.00
Oil Pan Gasket perma-dry high temp moulded
rubber K15C $30.75
Valve Cover Set perma-dry high temp moulded
rubber w/grommets & spark plug tube seals
K15E $43.95
Valve Stem Seal Set (24) preimum teflon type
K3G $47.25
Intake Manifold Set includes 2 lower & 2 upper
K15FS $38.95
Upper Intake Gaskets (2) K15F $22.90
Exhaust Manifold Set K15G $10.25
Front Timing Cover Set K15J $11.50
Front Crank Seal K15R $20.15
Rear Crank Seal K15Q $20.50
Throttle Body Base Gasket (non SVT)
K15H $2.50
EGR Gasket K15HE $2.10
Water Outlet Gasket K15N $6.25
Water Pump Gasket K15P $5.25
V6 Water Pump with Metal Impeller
Water pumps on Duratec V6 engines are prone to failure around
50,000 miles (some with as little as 30K). The problem lies with
their plastic impellers which have been known to crack on the
shaft (stops turning) or even disintegrate all together. Either way,
lack of water flow causes the engine to over heat. The worst
part is the temp. sensor won't tell the gauge to read hot until it's far too late
and the engine is ruined. Don't let this happen to you. Replace the pumps
before 50K. We have sourced a premium quality replacement water pump
with a cast metal impeller that has proven to be more reliable.
Water Pump with Metal Impeller (gasket included) K421 $69.00
Water Pump Drive Belt K6B $9.25
Electric Water Pump and Controller

Recently we have had a number of customers
question us about the feasibility of installing an
electric water pump on the Duratec V6 engine.
Some were interested in the 7-10 HP gain
associated with the removal of the standard
camshaft driven mechanical pump. Others were
looking for a way to simplify swapping in some
model years of the 3.0 V6 engine. After doing
some research based on what pumps have
proven reliable when installed on various types
of race engines in Europe (where electric water
pumps are commonly used) we can recommend
the following components. The water pump is both
light weight (2 lbs.) and compact in size (5"x5"x3")
with directional inlet/outlet fittings to be inserted Technical Specifications (Water Pump)
in the lower radiator hose. It is made from durable Operating Voltage 4V to 14.5V DC
Nylon and is a centrifugal design with a 300-1300 Maximum Current 7.5A
gallon per hour flow rate depending on voltage 4- Flow Rate 300-1300 gal/hr @ 13V DC
14 V DC. The pump is controlled remotely by a Operating Temp. -5 F to 270 F
fully adjustable microprocessor unit. The control Pump Design Clockwise centrifugal with
unit uses a thermo probe to sense temperature. volute chamber
Set the controller to the desired temperature and Motor Life 2000 hrs continuous
Pump Weight 2 Lbs
it will automatically adjust the rate of coolant flow
Pump Material Nylon 66
by regulating the voltage to the pump. Now the Maximum Pressure 50 psi
water pump can supply coolant at a flow rate Hose Sizes 1 1/4" to 2"
based on temperature, independent of engine Dimensions (HWD) 5" x 5" x 3"
RPM, which equates to more efficient cooling. The
pump can even be wired to run-on after hot engine Technical Specifications (Electric Control Unit)
shut down reducing heat soak. What we hope to
do in the future is to further test this system on Input Voltage 12V to 14.5V DC
Output Voltage 3V to 12V DC
our own vehicle and as well include a limited
Maximum Current 7.5A
number of interested "technically oriented" Operating Temp. -5 F to 140 F
customers who want to do an install and provide Controller Type Adjustable Microprocessor
us long term feed back. Sensor Type Thermal Coolant Sensor
Controller Weight 10 oz.
Electric Water Pump ACP2 $225.00
Dimensions (HWD) 3 3/4" x 2 9/16" x 2"
Pump Controler ACP2C $139.00
Accusump Oil Accumulator
There have been some cases of Duratec V6 engine bearings being
burned up due to lack of oil pressure during hard cornering. We
can not confirm that this problem will effect all engines, but
we can recommend the best prevention. The most
effective way to protect wet sump engines from lack of
oil pressure situations is to fit a Accusump oil
accumulator. The Accusump remotely stores a volume
of oil (in this case 1 quart) under pressure to supplement
the engines oil system during maneuvers that cause fluctuations
in oil pressure such as hard cornering, braking and acceleration.. If
the engines oil sump pick-up becomes uncovered the Accusump
will discharge (for up to 20 seconds) supplying oil pressure until the
oil supply to the pump is returned. Discharged oil is returned to the
Accusump when normal oil pressure resumes. An added benefit is the unit
also pre-oils the engine by supplying oil pressure before start-up. Accusump
mounts remotely in the engine bay and is electrically controlled with a solenoid valve wired to the
ignition switch.
This supplies oil through hose to the oil filter location to an adaptor mounted between the block and the filter. This
is the oil input to the engine on non oil cooler equipped cars (pictured). For oil cooler equipped cars (most SVT's)
we can supply components to run the oil supply directly to one of the engine block oil galleys.
Accusump Kit K2AE $349.00

includes 1 quart cylinder (size12" x 3 1/4"), electric valve, hose- 6' length Aeroquip FC333, Aeroquip fittings
(1) straight (1) 90 degree, Mocal sandwich adaptor and fittings.
High Performance Oil Cooler

We supply the same high efficiency laminar water to oil heat exchangers that are currently being used throughout
the racing industry. The Laminova oil heat exchanger consists primarily of two pieces of extruded aluminum
profiles, the core and the shell. The inner surface of the core is optimized for efficient water flow rates, low
pressure drop and minimum risk of fouling. The outer surface of the core is optimized for maximum liquid (oil) to
surface contact, laminar flow, low pressure drop and high heat transfer.
The assembly of both sections is sealed with o-rings, ensuring
that the unit is resistant to vibration and pressure pulsation.
The Laminova cooling concept can be best described as
an almost infinite number of interconnected laminar
cooling fins. Each fin is 3mm in height by only 0.2mm
thick. The oil flow gap between the fins is 0.3mm. By
this arrangement the oil flow is continuously interrupted
and restarted after an optimized flow length. An added
advantage is the coolers ability to deaerate oil that
passes through the unit. These small and efficient
devices mount easily in modern cluttered engine
compartments. Our Duratec V6 kit includes a 90mm
Laminar Cooler with 5/8" hose fittings designed to plumb in
the engine heater coolant circuit with a Mocal sandwich plate
that mounts between the block and oil filter to facilitate oil flow to and from the cooler. We also supply Aeroquip
hose and fittings for plumbing the oil lines. Note: some SVT's are factory equipped with a water to oil circulator
between the block and filter. This "doughnut" type of oil cooler is limited in its capabilities and would be better
replaced with one of our Laminar Oil Cooler Kits.
Laminar Oil Cooler Kit K2OC $295.00
Baffled V6 Oil Pan
New 03 Duratec oil pans offer additional baffling for
improved oil control. We can't come out and say
that this is the answer to oil related engine failure
in the 2.5L V6 engines, but it is interesting for Ford
to make changes to the 2003 version of the oil pan
while holding the party line "there is no problem". We
all know automobile manufacturers are extremely
reluctant to spend money re engineering parts unless
there is an issue that requires attention. Is this an
admission on their part? Take it all for what you may, here
is the latest specification oil pan kit that includes all the components
required for installation (pan, drain plug, gasket, and fastening
hardware). Only time will tell if this version of the pan is the definitive
answer to the Duratec's oil related problems, but at less than $150.00
you get quite a bit for your money and it should be considered a cheap
insurance/upgrade.
Baffled V6 Oil Pan Kit K19P $139.00
High Performance Oil Filter System

The Canton Mecca spin on filter system is the finest oil
filter available for your engine and since the Duratec has
issues with oil control we feel using the ultimate filter is
not a bad idea. CM filters combine typical spin-on filter
convenience with canister filter performance. A machined
billet aluminum housing accepts a proprietary high flow
replaceable element. Simply remove (spin-off) the filter
assembly, remove the end plate (accessing the element),
swap in a new element cartridge, reassemble and spin-
on. How is a CM filter different? The filter uses a
replaceable "depth filtration" element made of woven
synthetic fibers. Millions of intertwined passages catch
contaminants and provide superb flow characteristics. CM
elements filter out particles down to 8 microns and have
a flow rate greater than paper "surface area" filters without the need for a bypass valve (full flow all
the time). Depth filtration filters last longer (as much as 10,000 miles) because of greater area to
catch contaminates without restriction oil flow. If you care to have the absolute best oil filter system
available this it the one to have. Also consider that once you own filter the cost of replacement
elements are not really much more than premium type spin-on filters and since the elements do not
need to be replaced as often the CM system pays off over time.
Canton Mecca High Performance Oil Filter System K19F $89.50
Replacement Filter Cartrage/Insert (1) $10.50
Replacement Filter Cartrage/Insert (6 pack) $54.00
High Flow Y Pipe & Converter
The standard exhaust Y pipe on the V6 engine cars is quite restrictive. An easy way to pick up
some very tangible performance (8-10hp) is to replace it with our high flow Y pipe and catalatic
converter combo. Primary pipes are custom mandrel bent available in either stainless
or aluminized tubing. The converter is a high flow stainless dual 2" inlet (with
O2 sensor bung) and 2.5" outlet which connects to a stainless steel flex
joint. BAT high flow Y pipe kits connect to all standard and
NEW aftermarket exhaust systems using the stock 2 bolt flange.
High Flow Y Pipe- Aluminized K521DA $279.00
(aluminized primary pipes, stainless converter, stainless flex)
High Flow Y Pipe- Stainless K521DS $319.00
(stainless primary pipes, s.s converter & s.s. flex)
Monza Performance Exhaust for Cougar

The Monza cat-back exhaust for the Cougar not only performs well and sounds great, but is
also inexpensive enough for every owner to afford. Systems are made from mandrel bent
(2 1/4" center / 2" dual tail) high grade aluminized 16 gauge steel with low restriction muffler
and chrome plated resonated (3 1/4") exhaust tips. The quality on these systems is top
notch. The mandrel bends are free of any shrinkage or distortion for maximum
flow and the machine welding is also artfully done. You could not duplicate this
system at a custom muffler shop for anywhere near the price. A stainless
system would also be a good choice, but we don't think there is always the
need to spend the additional money as you wont realize any performance
advantage with stainless other than the longevity of the material. Note:
although designed to fit the Cougar we have successfully installed these on
the V6 Contour as well, you have to fiddle abit with the mountings on the
rear tips.
Monza Exhaust 1999-02 Cougar V6 K522C $209.00
(twin pipes w/polished round resonated tips)
Monza Exhaust Stainless 1999-02 Cougar V6 K522CS DISC
(all stainless system, twin pipes w/polished round resonated tips)
Borla Stainless Steel Exhaust Systems

Borla, the leader in stainless steel exhaust system technology offers a number of
selections for the Contour SVT and Cougar cars. These cat-back systems
are extremely well made and offer both tangible power increases and a
distinctive sound. Borla exhaust systems are also lifetime warranted. The
contour SVT system can be adapted to the standard V6 engined cars (two additional
hanger points must be added) and is not a difficult task. There are a number of Cougar
systems available- single outlet and dual outlet systems with an optionally styled (outlets) tips.
Borla Exhaust 1998.5-99 Contour SVT K522S $649.00

(twin pipes with polished round tips w/rolled edges)
Borla Exhaust 1999-2000 Cougar V6 K522C2 $649.00

(twin muffler- polished round angle cut tips w/rolled edges)
Product Note:
With the ever escalating cost of Borla
NEW exhausts we have been searching for a
replacement "high end" system to sell. In fact
when we sell our remaining inventory of Borla
the price will have to go up at least another
$50.00 leaving us unsure how much demand
there will be for $700.00 exhaust systems.
We have sampled a number of alternative
brand systems and have not been all that
happy with their sound. Most are way too loud
and resonate badly at highway cruise. We
were excited to receive a call from a Bosal
rep informing us of their new exhaust for the
SVT. Upon receiving and installing a system
all we can say is wow. Great quality, fit, and
for once a manufacturer got it right in the
sound/noise department ! Take into account
an a truly affordable price and the Bosal
system is a slam dunk. (read more below)
Bosal Performance SVT Contour Stainless Steel Cat-Back Exhaust

Bosal, one of Europe's largest OE exhaust suppliers, brings their extensive knowledge and expertise
to the aftermarket with their Bosal Performance (once Brospeed) exhausts. These systems exude
quality, utilizing heavy gauge T-304 stainless steel which is carefully polished to a show like luster.
All joints are flange-fit, so there’s now worry about slip fit joints to work loose and cause leaks.
Mufflers come with 3" rolled edge angle-cut tips. If you require, they can be unbolted and swapped
out for any of Bosal’s other tips for a different look. Exhaust note is mellow without being raspy or
tinny. Another neat feature of this system is the rear mufflers are tunable and can be fitted with an
optional insert baffle if a quieter exhaust note is required. Performance wise one can expect a 6 - 8
hp gain, which is most notable above 4000 rpm where the engine feels more "revable". Bosal Systems
are sold with a 5 year unlimited mileage warranty. We feel confident you will agree, when you take
into account performance quality and price nothing on the market compares. Note: These systems
may be fit to the non-SVT 2.5L Contours with the addition of a passenger’s side muffler hanger.
Bosal Performace Contour SVT Cat-back Exhaust System K522BS $549.00
Special Deal
Make it a full system- add a BAT Y pipe (aluminized
or stainless) and save 10% on a Bosal Exhaust.
Y- pipe Exhaust Special

Aluminized Less -10% Price
279.00 + 494.10 = 773.10
Y- pipe Exhaust Special
Stanless Less -10% Price
319.00 + 494.10 = 813.10
Torque Biasing Differential
Quaife torque biasing differentials provide a constant and
infinitely variable output to both front wheels. These unique
differentials utilize a series of helical gears which sense the
amount of applied torque and
adjust automatically for
loss of traction. The
Quaife limited slip
design is also free of
high wear items
(clutches, ratchets
and plates),
making them
stronger and more
maintenance free Motor Mounts & H.D. Motor Mount Inserts
than other types of SVT motor mounts are the logical upgrade for 95-97
limited slip units. manual transmission cars. These uprated mounts reduce
Anyone who has had the engine movement and associated problems. H.D. urethane
pleasure of driving a vehicle equipped with a Quaife LSD motor mount inserts are specially designed to fill the "air
will immediately comment on its smooth seamless gap" spaces around standard rubber motor mounts making
performance while getting the power down, very unlike them considerably more firm. Limiting excessive engine
clutch/plate type LSD's which exhibit a notchy ratchet like movement also helps to reduce torque steer. Great for
take up through the drive line. Quite simply the finest
both straight line acceleration and carving up the Auto-X
limited slip unit available for the MTX75 type transaxle, and
a highly recommended upgradeforall 5-speed equipped course. Note H.D. motor mount inserts fit 1998 > manual
Contour/SVT/Mystique, Mondeo and Cougar cars being transmission cars only. Earlier cars (95-97) require SVT
using the car for motorsports or other high stress motor mounts prior to fitting H.D. engine mount inserts.
applications. Cars equipped with either the upcoming H.D. Motor Mount Inserts* (2 piece) K433B $18.50
supercharger kits will most definitely require a Quaife, as *install with front mount
torque steer and the standard differentials inherent
SVT Motor Mount (front) K433A $43.95
weakness will surely become problem. Now with lifetime
SVT Motor Mount (rear) K433C $47.95
warranty and lower price!!!
Limited Slip Differential K710 $695.00
Torco Synthetic MTF
Torco MTF is a specially designed low viscosity synthetic
based gear oil product that replaces ATF in manual
transmissions and transaxles. The increased performance
Torco MTF offers equates to less friction and heat
for extended bearing and syncro life, better shift
quality (especially when cold) and greatly
extended life over standard ATF fluids.
Torco is endorsed by many Indy car
and drag racing teams and is highly
recommended by racing transaxle
manufacturers Hewland and Quaife.
Clutch Kits We could not agree more and stand
We supply the Sachs "Super" clutch packages that include behind Torco being the very best
clutch disk, pressure plate, hydro throw-out bearing, and synthetic MTF product available at
clutch alignment tool. Sachs/Valeo supply more automobile any price and it will greatly improve
manufacturers with original cultches than all other clutch the shift "feel" of Ford's (known to be
component makers combined. Buying one of these balky) MTX75 transmission. Shifting
engineered kits will guarantee best quality, performance, becomes light and precise, almost
ease of installation, and reasonableprice. like a tune-up in a bottle. Note: MTX75 transmissions will
require 3 quarts (5.5 pint capacity).
Clutch Kit 4 Cylinder (2.0L) K519K $349.00
Clutch Kit 6 Cylinder (2.5L) K519K6 $379.00 Torco Synthetic MTF (quart) K2S $11.50
Uprated Shift Forks C.V. Boot Kits

In the evolution of the MTX75 transaxles, Ford made Replace ripped or torn boots immediately, before
some component changes which make sense expensive C.V. joints become damaged by dirt intrusion
incorporating into your next rebuild. Shift quality has or lack of lubrication. We carry handy replacement C.V.
never been a strong suit on these gearboxes, boot kits at a great price. Kits include boot, clamps,
updating to the latest shift forks will certainly help. circlips and specially formulated grease. Boots are
Improved bearing materials and lubrication makes a same on 4 & 6 cylinder models. One boot repairs one
difference on these high wear items. joint, 4 total per car- 2 inner, 2 outer.
Shift Fork 1st H734 $24.30 C.V. Boot Kit -Inner K550AK $9.50
Shift Fork 3rd H735 $28.15 C.V. Boot Kit -Outer K550BK $9.50
Shift Fork 5th H736 $26.60
Torsen T2 Traction Differential

The Torsen T2 LSD is ideally suited to performance FWD applications like the Contour
& Cougar. Features full-time torque sensing/biasing for immediate response to
varying driving conditions providing improved traction, acceleration and handling.
Torsen differentials are very similar in function, and performance, to the popular
Quaife units at almost 100.00 less. For all MTX75 5-speed equipped vehicles.
Torsen Differential MTX75 H710T $599.00
Transmission Mounts 2.5L V6

Transmission mounts are showing signs of wear on higher mileage cars, or
hard use, causing uncontrolled drivetrain movement usually felt as increased
"torque steer". In more extreme cases CV joint or axle failure can occur.
Replacement is simple with these complete mount assemblies. See below
for manual transmission (early and late) and auto transmission listings.
Trans Mount 95-95 MT K433T $98.30
Trans Mount 97-01 MT K433TL $115.00
Trans Mount 95-01 AUTO K433TA $105.30
Differential Installation Components

We can supply the components required for doing a Quaife or Torsen
differential installation. Items like differential carrier bearings, speedo
gear and shim assortments make this task much easier. Bearings are sold
each (2 required). Shims are supplied in an assortment of thicknesses.
Speedo drive gear fits Quaife differential which uses a 4 cylinder type gear.
Differential Bearing (each) H721 $17.50
Shim Assortment Pack (26) H721S $39.00
Speedo Drive Gear H716 $6.70
Replacement Bulbs
We carry a range of replacement bulbs for headlamp
9005 (high beam), 9006 (low beam), and 880/893
(fog) in higher wattages and more efficient gasses
for increased light output per watt. For bulbs with
output over 80 watts a 12 volt relay should be added
to avoid overloading the standard switch or wiring.
Head Lamp Bulbs

Bulbs for main headlamps (standard is 55w low, 65w high). All
are krypton gas "brite white" offering 10-15% more illuminus
output over standard bulbs of same wattage. Bulbs project
clean and white without the standard yellow tinge of stock bulbs,
or the annoyance of the pseudo HID purple look bulbs.
9005 - 65watt (krypton gas/brite white) Z9005-65 $9.50 each
12 Volt Relay w/wiring harness ZRELAY12 $6.50 each
Fog Lamp Bulbs

We offer higher wattage (50 watt) replacement bulbs for factory fog lamps (standard is 37 watt).
Amber offers reduced glare in rain & snow and is particularly good for fog lamp use.
880/893 - 50 watt Z880/50 $5.50 each
880/893 - 50 watt (blue diamond) Z880/50B $9.95 each
880/893 - 50 watt (amber) Z893/50G $9.95 each
European Side Marker Lamp
Original equipment European Ford Mondeo side marker lamps add

a touch of class and an extra degree of safety. Installation requires
drilling, filing and wiring. We supply instructions and template to
simplify the job. Bulb socket and 5 watt bulb included. Now available
with clear or smoke lens in addition to standard amber.
Euro Side Marker Lamp Amber (each) K317 $13.50

Euro Side Marker Lamp Clear (pair) K317C $29.95
Euro Side Marker Lamp Smoke (pair) K317S $29.95
Replacement Contour Head Lamps 1995-1997
Plastic head lamp lenses take a real beating,
literally being sandblasted opaque from road
grime or turned yellow from heat and excessive
sunlight. The lamps on the early Contours (1995-
97) are now really beginning to show their age. Get
maximum luminous performance again with our
affordable replacement head lamps. Lamps are supplied
as complete assemblies with bulbs and are DOT certified
O.E. type replacements.
Headlamp Assembly (RH) 1995-97 K350R $65.00

Headlamp Assembly (LH) 1995-97 K350L $65.00
Replacement Contour Head Lamps 1998-2001

The head lamps on the later 1998 and newer Contours are not as prone lens yellowing, where
the plastic actually becomes opaque, but they are not without their
problems. The plastic on these lamps tends
to "craze" causing a crows feet cracking effect
on the clear lens. Get maximum luminous
performance again with our affordable
replacement head lamps. Head lamps are
supplied as complete assemblies with bulbs and
are DOT certified O.E. type replacements. These are a cost
effective alternative to the expensive 200.00 lamps at the Ford dealer.
Head Lamp Assembly (RH) 1998-2001 K351R $124.50

Head Lamp Assembly (LH) 1998-2001 K351L $124.50
Replacement Fog Lamps

Ford Fog Lamp F8RZ-AA15200-AB common on 1995-2001 Contour/
Mystique (not SVT). Retail price at the Ford dealer is $49.00 each.
We purchased a quantity of brand new assembled units complete
with lamp, mounting, adjuster & bulb. Replace your stone chipped,
sand blasted, or cracked lamps with two new ones for less than the
cost of one at regular price! Contours & Mystiques witout factory fog
lamps can add lights by buying a headlamp switch for fog lamps at the
dealer (most cars are already equipped with wiring and plugs for lights).
Lamps measure 3 7/8" diameter and fit a 4" hole and could easily be
used in other automotive applications like custom front bumpers and grilles.
Replacement Fog Lamp K349 $17.50 each
Cougar Side Marker Lenses
A different look for your Cougar is to replace the
standard orange side markers with either a clear
or smoke/tint lens. Lamp/lenses are O.E. quality
with chrome dipped reflector bulb holder
assemblies. For the price we supply 2 lamp/lenses
with amber colored 5watt bulbs.
Cougar Side Markers (clear) K316C $ 27.95
Cougar Side Markers (smoke) K316S $27.95
Hella Dual Air Horns

Powerful and penetrating enough to get attention over
any level of road noise Hella trumpet type air horns are
the first choice with European drivers. Kit includes dual
metal trumpets (805 hz, 885 Hz), high performance
compressor w/air filter, 12v relay, and mounting bracket.
Add some European flavor to your Euro Ford, and
additional safety too.
Hella Dual Air Horn Set M312 $40.00
Mondeo Roof Mount Aerial

Most of the newer European cars utilize this type of antenna as
they are both esthetically pleasing and keep the radio signal free
of the engines ECU interferences. This handy European Ford
Mondeo roof mount radio aerial kit includes all the components
to install a roof mount antenna above the center of the front
windshield. Supplied components: aerial, mounting base, coaxial
cable and connectors, assorted hardware.
Mondeo Roof Mount Aerial Kit K330 $49.00
Hella Twin-Tone Electric Horns

Another alternative for drivers looking for a more serious
sounding horn set are the Hella twin tone electric's which are
a simple plug-in replacement for the wimpy stock horns.
Powerful 115dB horn kit includes dual plastic hi-low trumpets
with mounting brackets and 12v relay. Add some European
flavor to your Euro Ford, and additional safety too.
Hella Dual Electric Horn Set M313 $24.75
Cougar Projector Lamps

Here's a BAT exclusive, the hot new Cougar color coded projector lamps. We have a sample of
this stylish, soon to be released, head lamp for the Cougar. Lamps feature a round projector low
beam, formed reflector high beam, city lamp, clear front turn lens w/ amber
bulb and amber side turn indicator. Bulbs are halogen 9005 and 9006
type. Lamp interiors are supplied painted "color coded" in the
five most popular Cougar colors (black, red, yellow, blue,
green) with other colors available as special order.
Unlike the crop of (poor quality and non legal)
offshore head lamps for the Honda's, these
Cougar lamps are American made and 100%
legal. The manufacturer is the O.E. supplier
to Ford and the lamps are fully DOT certified.
We should have lamps available to sell by April/May
2002. Price has not yet been determined but we figure they will be in the $350.00 range for a
pair. UPDATE 11/02 We are still in discussion with the manufacturer and still hope to offer
these lamps sometime in the future.
Euro Cougar Grille

We have had a number of recent requests for
this one. European Ford Cougar grilles feature a
plastic honeycomb mesh pattern and include blue Ford
oval. Grilles look great and fit US cars without modification
and can be painted if desired. To re-badge the rest of your Cougar
with appropriate Euro Ford emblems see page 35 for more information.
Specify early or late (has pointed corners as pictured) see below.
European Ford Cougar Grille 1999-2000 K320C $39.00

European Ford Cougar Grille 2001-02 K320CL $29.00
(late type shown)
Ford Rally Sport "R/S" Emblems

Just in from Europe are these Ford Rally Sport "R/S" logo
emblems. Striking chrome with blue accent running
through the center. Emblems are plastic with self adhe-
sive backing and are available in two sizes (photo is close
to actual size) small 1 3/4" and large 2 3/4" size.
Emblem "R/S" (small) 1 3/4" H321R 19.45

Emblem "R/S" (large) 2 3/4" H321RL 24.50
BAT Inc. 7630 Maroaka. Rd. Sarasota, FL 34234 (941) 355-0005 fax (941) 355-4683
European Badges & Emblems
European Ford emblems and badges give a unique
look setting your car apart from the rest. Self
adhesive backing for simple installation, just peel
and stick. Most are bright chrome on black plastic,
except Ford ovals (blue), and Ghia crest (red, blue,
chrome). Along the same lines, we are often asked
about fitting European Mondeo sail panels.
Unfortunately they do NOT fit our US Contour/
Mystique cars.
"Mondeo" Emblem K321M 17.00

"Ford" Oval Emblem (large*) 4.5" C321 18.00
*(Euro emblem, darker navy blue color)
"Ford" Oval Emblem (small*) 3.5" K321 15.00
*(Ford blue, same size as used on Contour)
"Ghia" Emblem (crest) M352G 16.65
"Ghia" Emblem (script) G352G 17.25
"R/S" Emblem M352RS 14.00
"16V Emblem E321V 6.75
"2.0" Emblem K321L2 7.20
"Zetec" Emblem K321Z 7.75
"Zetec-S" Emblem K321ZS 12.25
"24V" Emblem K321V 7.00
"V6" Emblem K321V6 8.50
"Cosworth" Emblem M321C 23.40
"ST200" Emblem K321ST 8.49
"ST200" Sticker (intake manifold) K515S 4.95
"ST24" Emblem K321S4 8.49
emblem/sticker
for intake manifold &
front door threshold
Permanent Fuel Filler Cap
Gas and go with the Perma-Cap. Do away with the cumbersome
standard "cap on a leash" type Ford fuel cap. Thread on the Perma-
Cap and simply insert the fuel nozzle directly into the spring loaded
trap door in the center, add fuel, and remove the nozzle, done!
Fast and efficient fueling with no more cap fumbling or scratched
body work. Cap fully seals when closed, OBII compatable.
Perma-Cap Fuel Filler Cap AFC001 $7.25
Bullitt Fuel Door/Cover

Fitting the Mustang "Bullitt" fuel door cover to the
Contour has become a popular conversion. Cap
is very nicely constructed in a brushed stainless
look finish and installs in the existing recess for a
flush fit. Finished product looks like it was made
for the car and costs considerably less than trying
to fit a real aviation fuel cap. Use with one of our
Perma-Caps (see above) for the ultimate fast and
stylish fill up.
New
Bullitt Fuel Door H2FC $77.00 Lower
Price
carbon
Aero Look Filler Cap
Aviation type filler caps are all the rage these days. You see
them on all the show cars and customs. Unfortunately installing
the original article is both costly to buy and even more so to
have installed. If you would like the aero cap look without the
hassles or cost we have a good looking alternative in our Aero
Look Fuel Door Cover. These are a nicely designed self
adhesive plastic cover that simply covers the existing fuel door.
Available in either silver or carbon finish. Use on the flat (remote
silver
release) fuel door, or (manual fuel door) cut a notch in the
cover for the tab.
Aero Look Filler Cover (silver) K325S $24.50

Aero Look Filler Cover (carbon) K325C $29.00
Door Threshold Protectors Logo Scuff Plates- Chrome Logo Scuff Plates- Carbon
European Ford black vinyl door sill Chrome effect door sill scuff plates Carbon Fiber effect door sill scuff
threshold protectors. Although a with Mondeo logo. These exclusive plates with Mondeo logo. These
little less fancy than European Ford e x c l u s i v e
either the chrome Motorsport scuff European Ford
or carbon sill scuff plates add a touch Motorsport scuff
plates, these heavy of class and protect plates add a touch
duty (.5mm) thick the door sill tops of class and protect
3M self adhesive from damage. the door sill tops
vinyl strips do offer Bright chrome from damage.
more sill coverage "Mondeo" logo Bright chrome
and thus better protection. Custom shines through a brushed "Mondeo" logo shines through a
cut for easy installation, in a "stainless look" laminate under "carbon look" laminate under
textured black finish with thick clear plastic. We sampled thick clear plastic. We sampled
embossed Ford logo. Install on a a number of similar door sill a number of similar door sill
new car to prevent damage or plates (made various forms of plates (made various forms of
cover up the multitude of scuffs and plastics and metal) before plastics and metal) before
scrapes on your existing ride. Much deciding these offered the deciding these offered the
cheaper and easier than repainting overall best quality and fit. overall best quality and fit.
the door sill.
Door Threshold Protectors Mondeo Logo Scuff Plates (chrome) Mondeo Logo Scuff Plates (carbon)
set (F& R) K803B $44.50 set (F& R) K803CH $99.50 set (F& R) K803CA $114.50
black vinyl chrome effect carbon effect
Floor Mats
European Ford Foul Weather Mats are made of heavy duty rubber with
deep ridges to catch melting ice, water, mud, spilled coffee or whatever.
This type of mat offer the best protection for your interior over the winter
months or when you know things are going to get messy. Perfectly
contoured for exact fit Foul Weather Mats are also stylish enough for
everyday use. Can be placed over standard plush mats or directly on
carpeting. When dirty or filled with water- remove, hose off, drain, and
reinstall.
Floor Mat Set (front & rear) K1010 $55.00
Interior Cabin Air Filter

Start off the season fresh with a replacement micro-air
filter for your cars interior. It is a nice feature to have a filter
incorporated in the HVAC system. Many owners are not
aware they even have a filter and they should be
serviced yearly. Ford retail price in this filter is $38.00. We
have the factory Ford filter in a aftermarket box for only
$18.50. Fits all years Contour, Cougar and Mystique.
Interior Cabin Air Filter K7F $18.50
Contour/Mystique Shop Manual Book- The Cosworth Fords
This book covers the production and competition history

of the Cosworth powered production Fords. Sierra RS
Haynes shop manual covers the 1995-2001 Cosworth & RS500, Sierra Sapphire Cosworth & 4x4,
Contour/Mystique model cars. These are well Escort Cosworth 4x4, Scorpio Cosworth, and Mondeo
written manuals. Certainly better than Chiltons Cosworth powered touring cars all have dedicated chapters.
"install in reverse order to removal". Some Lots of rare color and black & white photos, illustrations,
information on European varriants is also information and specifications. Hard bound 8 1/2" x 10 1/
included. 4", 248 pages 250 b/w & color photos/illustrations.
Haynes Shop Manual K204 $14.95 The Cosworth Fords M208 $39.50
R/S Aluminum Shift Knob
New from the Focus R/S turbo comes this high quality aluminum shift
knob, specially machined to work properly with the MTX75 transmissions
reverse lock-out ring. Knobs aluminum construction has some weight
to is and a nice feel. Comfortable round shape with (blue) embossed
shift pattern, and R/S logo. Fits all 5-speed equipped Contour/Mystique/
Cougar.
R/S Aluminum Shift Knob H7RS $95.00
Alloy Look Shift Knob & Hand Brake Lever

Hi tech alloy effect (plastic) European Ford R/S shift knob specially designed
to work properly with the MTX75 transmissions reverse lock-out ring.
Comfortable anatomical shape, thread-on installation, fits all 5-speed
equipped Contour/Mystique/Cougar. Matching alloy effect hand
brake lever available (see below).
Alloy Look Shift Knob K7KA $49.00
Hi tech alloy effect (plastic) European Ford R/S hand brake
lever is the perfect match for the alloy look shift knob.
Comfortable anatomical shape with 3 rubber non slip rings on
the grip end, simple installation, fits all Contour/Mystique/Cougar.
Alloy Look Hand Brake Lever K564HA $59.00
R/S Leather Shift Knob

High quality European Ford R/S shift knob specially
designed to work properly with the MTX75
transmissions reverse lock-out ring. All Leather,
comfortable anatomical shape, embossed shift
pattern, fits all 5-speed equipped Contour/Mystique/
Cougar.
R/S Leather Shift Knob K7KL $65.00
Carbon Look ST200 Shift Knob

Hi tech carbon look (plastic) Factory Ford shift
knob from the limited production Mondeo ST200.
Specially designed to work properly with the
MTX75 transmissions reverse lock-out ring.
Comfortable anatomical shape, simple thread-
on installation, fits all 5-speed equipped Contour/
Mystique/Cougar.
Carbon Look Shift Knob K7ST $62.00
CURRENT SPECIALS
Multi-
15" Wheel & Tire Special Spoke
Need some winter wheels & tires, or want to update Wheel
a car from 14" steelies? We have a supply of new
car takeoff 15" Focus wheels with 195x60x15"
Firestone Firehawk or Goodyear Eagle Tires. Your
choice on style, either 5 spoke or multi spoke
design. Wheels fit all 4x108mm et45-50
applications (Contour/Mystique, Cougar, Focus).
We have seen these selling, on average, in the
$400.00 range for used sets. Our special is only
$399.00 for the set of NEW wheels & tires mounted
with center caps (ups shipping $15.00-$20.00 per
wheel w/tire additional). Wheels are also available
seperately in sets of 4 for $199.00.
15" Wheel Deal H412WD $399.00

15" Wheels (4) no tires H412W $199.00
5 Spoke
Wheel
16" Wheel & Tire Special

New car takeoff's -16" Focus wheels and 205x50x16" Firestone
Firehawk GTA/02 tires. Wheels fit all 4x108mm et45-50
applications (Contour/Mystique, Cougar, Focus). We have seen
these selling, on average, in the $400.00 range for used sets.
Our special is only $449.00 for the set of NEW wheels &
tires mounted with center caps (ups shipping $15.00-$20.00
per wheel w/tire additional).
16" Wheel Deal H411WD $449.00

16" Wheels (4) no tires H411W $239.00
PAGE 1 of 5
BAT Inc. 7630 Matoaka Road. Sarasota, FL 34243
PAGE (941) 355-0005 fax (941) 355-4683
1 of 5
Cougar Deals
We just uncovered a cache of Cougar bits leftover from production of the limited edition XR/C2 mod-
els. These cars were equipped with some sporty looking body dress-up items. As usual quantities are
limited get-em while you can.
Cougar Rear Spoilers

Limited Edition XR / C2 rear wing
spoilers. These are also the same as
spoiler Mercury sold as a Rousch dealer
installed accessory for the Cougar. Spoiler
mounts at both corners and is raised off the trunk in
the center with a curved lip at the rear edge. Looks and fits
great as only original equipment parts do. Spoiler is supplied in
(red) with mounting studs and soft foam pad at corners. We looked this up
with Ford and were shocked at the price- $875.00 retail ! We can do much better,
how's $99.00 - that's even less than similar lesser quality aftermarket copies of this one.
Notes: supplied color is red (if your car is red good- if not paint to match), we can not be responsible
for any blems in the red finish, scoops fit all stock cougar trunks without modification.
Cougar Rear Spoiler K306CR $99.00
Hood Scoops
Hood scoops, again another Cougar XR/C2 or
ut
Rousch dealer installed accessory. Definitely a cool
O
looking, well made, moulded plastic scoop. Mounts with
d
l
incorporated mounting studs and self adhesive tape (supplied). We
o
- S
checked this one for price with Ford, $437.00...Ouch ! We should not have
any problem selling these for only $119.00. Notes: supplied color is red, if your
rr y
car is red good, if not paint to match- we can not be responsible for any blems in the red
o
finish, scoops fit all stock cougar hoods without modification.
S
Cougar Hood Scoop K813CS $
Euro Cougar Grilles

We are way overstocked on 2001-02 European Ford Cougar grilles. They
feature a plastic honeycomb mesh pattern and include blue Ford oval.
Grilles look great and fit US cars without modification and can be
painted if desired. Our regular price is $39.00, now on
special for $29.00 -untill stock is lowered to managable
levels.
Euro Grille Cougar 2001-02 K320CL $29.00
Ford Contour Performance Parts.........by
TERMS OF BUSINESS
Hours of Operation
Order desk hours are Monday through Friday 9:00 a.m. until 5:00 p.m. Eastern Time. Whenever possible orders received before 12:00 noon
will be processed and shipped the same day. If anyone would like to visit our location we would like to request that you please make an
appointment before dropping by. We enjoy seeing our customers, discussing their cars, and showing them our latest developments,
however, some days or times of day are better for us to give the attention we like to offer.
Ordering Procedure
You may place an order by telephone, fax, or by mail. Ordering by telephone will connect you to a technical-sales advisor who will
help with any questions, or make ordering recommendations, if you require. Knowing your 6 digit BAT customer number, catalog part
numbers, quantities, and description of order items will help minimize any possible errors in processing your order. Telephone orders
may be placed during business hours as listed above. Fax orders may be placed anytime day or night.
Payment
Payment may be made by Visa, Master Card, Amex, Money Order or Personal Check. Orders which have been paid for by Personal
Check will be shipped only after the check has cleared (allow up to 14 days). Orders accompanied by Personal Checks that have
been bank certified will be shipped with out delay. We have no objections to shipping on a COD basis if required, however, all COD's
must be paid upon delivery with money order or certified check. When ordering by mail or fax by Visa or Master Card be sure to include
your card number and expiration date. Residents of countries outside the United States must prepay for their goods in U.S. currency.
All prices for goods shipped outside the continental United States are quoted FOB Sarasota, FL. All shipping/duty charges must be
the responsibility of the consignee at rates applicable to that particular country.
Shipping
Unless otherwise stated all orders will be shipped by United Parcel Service (UPS) surface system. Actuall UPS rates are charged based
on package weight , zone (distance traveled from source) and insured value. We do NOT charge additional "handling" fees. We can
also offer express (overnight, 2 day or 3 day) service if required, check with us for details and additional charges. Items too large or
heavy for UPS service will be shipped common carrier (truck) freight collect. Optional shipping services include Surface Mail, Air Mail,
and Air Freight at current rates.
Back Orders
We dislike back orders as much as you do, and although we carry a huge inventory of merchandise it is inevitable that we will sometimes
run out of certain items. In this case we will hold the order open and ship the back ordered item directly when the item becomes available.
We NEVER charge for back order items until they actually ship. If an item looks like it will be on back order for longer than 4 weeks we
will try and let you know the approximate time of delivery. You will then have the opportunity to reconfirm or cancel your order.
Privacy & Security

Your personal information is used/maintained to facilitate the services you request and provide you with a smooth, efficient service. As
a matter of policy, personal data is strictly used for internal purposes only. BAT treats personal data as an asset that must be protected
against loss and unauthorized access. Our main computer network is NOT connected to any outside source and we employ many
different security techniques to protect all data from unauthorized access.
Special Orders
Some items that we offer are available as special orders. This includes custom variations on catalog items and race prepared parts. All
special order items require a 50% deposit at the time the order is placed with the balance due at time of shipping. You will be advised at the
time of your order if any item falls into this category.
Returns
All returns must be authorized by BAT with in 30 days of the invoice date and must be sent prepaid. Returns must have an authorized RGA number
and be accompanied by a copy of the original invoice. A restocking charge of 20% may be assessed at our discretion depending on the reason
for the return. Certain parts such as bearings, books, electrical items and piston rings or any part that has been modified or installed in any way are
not returnable. Return items totaling less than $20.00 can be returned for store credit only.
Warranties
All parts are covered only by the manufacturers warranties and/or guarantees. BAT Inc. can assume no responsibility or liability for use
or application by the user. Claims for goods damaged in transit are the responsibility of the carrier. You should always examine the
contents of your package and notify the carrier immediately if there is any sign damage.
- Important Notice -
Some of the equipment in this catalog is intended for racing or off-highway use in the United States. BAT Inc. ships all over the world so
we must make it the responsibility of the customer to check the legality of fitting any part to his/her car. There are many different State,
Federal and provincial regulations governing the replacement of automotive parts and BAT assumes no responsibility or liability for their
illegal use. Please check the regulations in your area before ordering.

BAT Catalog - Contour

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

BAT Catalog - Contour

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

BAT Catalog - Contour

Uploaded by

Copyright:

Available Formats

PERFORMANCE & SERVICE

>>> CATALOG LAST UPDATED <<<

BAT is a recognized Ford Motorsport

Suspension Components 11-19 03/01/03 90%

Road Wheels 20-21 04/17/04 90%

Engine Components 22-32 08/07/03 80%

Exhaust Components 33-34 05/99/03 80%

Drivetrain Components 35-36 01/27/04 50%

Lighting & Electrical 37-40 06/20/03 75%

Interior/Exterior Items 41-45 03/02/04 50%

Current Specials 46-47 04/17/04 100%

Cougar (1999-2000) are a combination of standard Contour and SVT brakes.

SVT (up to 5/99) ONLY

REAR BRAKE COMPONENTS

Premium European Rotors- Standard & Cross Drilled

Rear Rotor- standard K425RA $45.00ea.

BAT / Wilwood 4 Piston Caliper Kit* K416WC $459.00

Focus SVT Brake Components

Aeroquip Brake Hoses

ST24 Front Springs

Front Spring ST24 (each) K414 $95.00

European Handling Kit

BAT European Handling Kit (95-2001 Contour) K400A $595.00

Read customer comments on the BAT European Handling Kit :

Euro Sport Struts

Sachs Super Gas Struts

Front Sachs Super Gas Strut (95-97) K401S $79.00 each

Spax Adjustable Front Strut (Contour 1995-97) K401A TBA

Front Strut Brace Contour/Cougar

Front Strut Brace Contour/Cougar K403F $124.50

Rear Strut Brace Cougar ST200

Rear Strut Brace Cougar ST200 K403RC $279.00

Upper Strut Mount Front (each) K404F $29.50

Rear Strut Brace

Rear Strut Tower Brace K403R $129.00

Adjustable Front Camber/Caster Kit

Adjustable Front Camber/Caster Kit (each) K423F $74.50

The Contour is a unique application for road wheels.

5-spoke Cosworth Wheel

4 Spoke "Turbo" Wheel 2004 SVT Wheel 17" 2 x 4 Spoke Wheel

Performance Cone Air Filter Kit

MAF Gasket MAF Adaptor IAT Relocation Kit

The DCAF Performance Air Filter Kit takes the cone

Air Inlet Pipe

Ignition Wire Sets

Wire Set Ford Racing 9mm (2.5 6cyl*) K9HM- _ $47.50

4 cylinder coil wire ends

Dual Mass Crank Damper

SVT/ST200 Upper Intake Manifold K515 $XXX.XX

ST200 Manifold Logo/Emblems

Inlet Manifold Logo/Emblem "ST200" K515S $4.95

SVT/ST200 Lower Intake Manifolds

Lower Intake Manifold (RETURN-LESS) Type K515L $395.00

ARP Head Stud Set K2DS $239.00

Replacement Fuel Pumps

Fuel Pump & Strainer 1997-99 (Return System) K10A $74.50

Replacement Fuel Injectors

Fuel Injector 2.5L V6 17lb K7G $19.00ea

Electric Water Pump and Controller