Scribd
Upload
7K views2 pages

Types of Pipe Lining Processor

According to the document, there are three main classifications of pipeline processors: 1. Arithmetic pipelines segmentize arithmetic logic units to allow for pipeline operations on various data formats, as seen in computers like the Star-100, TI-ASC, Cray-1, and Cyber-205. 2. Instruction pipelining overlaps the execution of instructions by fetching, decoding, and operand fetching of subsequent instructions, known as instruction lookahead. Most high-performance computers now use instruction pipelines. 3. Processor pipelining refers to cascading multiple processors to pipeline process the same data stream, with each processor performing a specific task and passing results downstream. This is not yet a widely accepted practice.

Uploaded by

Vinay Singh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
7K views2 pages

Types of Pipe Lining Processor

According to the document, there are three main classifications of pipeline processors: 1. Arithmetic pipelines segmentize arithmetic logic units to allow for pipeline operations on various data formats, as seen in computers like the Star-100, TI-ASC, Cray-1, and Cyber-205. 2. Instruction pipelining overlaps the execution of instructions by fetching, decoding, and operand fetching of subsequent instructions, known as instruction lookahead. Most high-performance computers now use instruction pipelines. 3. Processor pipelining refers to cascading multiple processors to pipeline process the same data stream, with each processor performing a specific task and passing results downstream. This is not yet a widely accepted practice.

Uploaded by

Vinay Singh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

According to the levels of processing, Handler (1977) has proposed the following classification scheme

for pipeline processors:

Arithmetic Pipeline : The arithmetic logic units of a computer can be segmentized for pipeline
operations in various data formats. Well-known arithmetic pipeline examples are the four-stage pipes
used in Star-100, the eight-stage pipes used in the TI-ASC, the up to 14 pipelines stages used in the
Cray-1, and up to 26 stages per pipe in the Cyber-205.
Instruction Pipelining : The execution of a stream of instruction can be pipelined by overlapping the
execution of the current instruction with the fetch, decode, and operand fetch of subsequent
instruction. This technique is also known as instruction lookahead. Almost all high-performance
computers are now equipped with instruction-execution pipelines.

Processor Pipelining : This refers to the pipeline processing of the same data stream by a cascade
of processors, each of which processes a specific task. The data stream passes the first  processor with
results stored in a memory block which is also accessible by the second processor. The second
processor then passes the refined results to the third, and so on. The pipelining of multiple processors
is not yet well aecepted as a common practice.
According to pipeline configurations and control strategies, Ramamooorthy and Li (1977) have
proposed the following three pipeline classification schemes:
Unifunction Vs. Multifunction Pipelines : A pipeline unit with a fixed and dedicated function, such
as the floating-point adder is called unifunctional. The Cray-1 has 12 unifunctional pipeline units for
various scalar, vector, fixed-point, and floating-point operations. A multifunction pipe may perform
different subsets of stages in the pipeline. The TI-ASC. has four multifunction pipeline processors,
each of which is reconfigurable for a variety of arithmetic logic operations at different times.

Static Vs. Dynamic Pipelines: A static pipeline may assume only one functional configuration at a
time. Static pipelines can be either unifunctional or multi-functional. Pipelining is made possible in
static pipes only if instructions of the same type are to be executed continuously. The function
performed by a static pipeline should not change frequently. Otherwise, its performance may be very
low. A dynamic pipeline processor permits several functional configurations to exist simultaneously. In
this sense, a dynamic pipeline must be multifunctional. On the other hand, a unifunctional pipe must
be static. The dynamic configuration needs much more elaborate control and sequencing mechanisms
than those for static pipelines. Most existing computers are equipped with static pipes, either
unifunctional or multifunctional.

Scalar Vs. Vector Pipelines : Depending on the instruction or data types, pipeline processors can be
also classified as scalar pipelines and vector pipelines. A scalar pipeline processes a sequence of scalar
operands under the control of DO loop. Instructions in a small DO loop are often prefetched into the
instruction buffer. The required scalar operands for repeated scalar instructions are moved into a data
cache in order to continuously supply the pipeline with operands. The IBM System/360 Model 91 is
typical example of a machine equipped with scalar pipelines. However, the Model 91 does not have a
cache.
Vector pipelines are specially designed to handle vector instructions over vector operands. Computers
having vector instructions are often called vector processors. The design of a vector pipeline is
expended from that of a scalar pipeline.The handling of vector operands in vector pipelines is
under firmware and hardware controls (rather than under softwarecontrols as in scalar pipelines).

You might also like