Scribd
Upload
125 views1 page

Electronique Mpsa44

This document provides specifications for the MPSA44 high voltage transistor. It lists the transistor's absolute maximum ratings including collector-base voltage of 400V and continuous collector current of 300mA. The electrical characteristics are also given, such as a collector-emitter breakdown voltage of 400V minimum and a static forward current transfer ratio ranging from 40 to 300 depending on the collector current and voltage conditions.

Uploaded by

nassirou
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
125 views1 page

Electronique Mpsa44

This document provides specifications for the MPSA44 high voltage transistor. It lists the transistor's absolute maximum ratings including collector-base voltage of 400V and continuous collector current of 300mA. The electrical characteristics are also given, such as a collector-emitter breakdown voltage of 400V minimum and a static forward current transfer ratio ranging from 40 to 300 depending on the collector current and voltage conditions.

Uploaded by

nassirou
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

NPN SILICON PLANAR

HIGH VOLTAGE TRANSISTOR MPSA44


ISSUE 2 – MARCH 94
FEATURES
* High voltage

APPLICATIONS
* Telephone dialler circuit
E
B
C

TO92
ABSOLUTE MAXIMUM RATINGS.
PARAMETER SYMBOL VALUE UNIT
Collector-Base Voltage VCBO 400 V
Collector-Emitter Voltage VCEO 400 V
Emitter-Base Voltage VEBO 6 V
Continuous Collector Current IC 300 mA
Power Dissipation at Tamb =25°C Ptot 625 mW
Operating and Storage Temperature Range Tj:Tstg -55 to +150 °C

ELECTRICAL CHARACTERISTICS (at Tamb = 25°C).


PARAMETER SYMBOL MIN. TYP. MAX. UNIT CONDITIONS.
Collector-Base V(BR)CBO 400 V IC=100µ A, IE=0
Breakdown Voltage
Collector-Emitter V(BR)CEO 400 V IC=1mA, IB=0*
Breakdown Voltage
Collector-Emitter V(BR)CES 400 V IC=100µ A, IE=0
Breakdown Voltage
Emitter-Base V(BR)EBO 6 V IE=10µ A, IC=0
Breakdown Voltage
Collector Cut-Off ICBO 0.1 µA VCB=400V, IE=0
Current
Collector Cut-Off ICES 500 nA VCE=400V
Current
Emitter Cut-Off Current IEBO 0.1 µA VEB=4V, IC=0
Collector-Emitter VCE(sat) 0.4 V IC=1mA, IB=0.1mA*
Saturation Voltage 0.5 IC=10mA, I B=1mA*
0.75 IC=50mA, I B=5mA*
Base-Emitter VBE(sat) 0.75 V IC=10mA, I B=1mA*
Saturation Voltage
Static Forward Current hFE 40 IC=1mA, VCE=10V*
Transfer Ratio 50 300 IC=10mA, VCE=10V*
45 IC=50mA, VCE=10V*
40 IC=100mA, VCE=10V*
*Measured under pulsed conditions. Pulse width=300µs. Duty cycle ≤2%

3-80

You might also like