Scribd
Upload
188 views2 pages

INIC-1608 Product Brief

The INIC-1608 provides a solution to connect SATA devices to USB hosts. It integrates a USB-PHY, SATA link/PHY core, microprocessor, and mass storage functionality into a single chip. It supports data transfer rates up to 60 MB/sec from SATA devices to USB hosts and includes features such as a USB 2.0 PHY, 8051 microprocessor, 2KB SRAM, optional external NVRAM, and HID support.

Uploaded by

greenelephant150
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
188 views2 pages

INIC-1608 Product Brief

The INIC-1608 provides a solution to connect SATA devices to USB hosts. It integrates a USB-PHY, SATA link/PHY core, microprocessor, and mass storage functionality into a single chip. It supports data transfer rates up to 60 MB/sec from SATA devices to USB hosts and includes features such as a USB 2.0 PHY, 8051 microprocessor, 2KB SRAM, optional external NVRAM, and HID support.

Uploaded by

greenelephant150
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

USB to SATA Bridge

Overview • USB 1.1 and USB 2.0 compliant.


• USB Mass Storage Class Bulk-Only
The INIC-1608 provides an advanced Transport Specification Compliant.
solution to connect SATA devices to • SATA specification 1.0, SATA II
USB Host with integrated CPU and Compliant (Hot Plug is supported).
embedded SRAM/ROM. To provide • Support SATA BIST through USB
high performance and cost effective and SATA bus
solution, the INIC-1608 integrates • Support ATA/ATAPI device DMA
USB-PHY, Mass Storage Class Bulk- and PIO mode.
Only USB function, SATA link/PHY • 2k bytes of data buffer for data
core and microprocessor into a single transfer.
ASIC. The INIC-1608 provides the • On-Chip 3.3V to 1.8V regulator and
data transfer rate of up to 60 MB/sec 5V to 3.3V regulator.
connecting to a 1.5G SATA interface. • 48 pin LQFP

Feature Summary Firmware/Software Support


• Integrates USB2.0 PHY IP core. • USB Mass Storage Class Bulk-Only
• Data transfer rate of up to 60 Transport support
MB/sec. • Provide software utilities for
• Integrated internal Turbo 8051 uP NVRAM upgraded.
with 24KB embedded ROM and
2KB SRAM.
• External NVRAM supported Devices Support
(optional).
• Support HID. • Hard disk drives
• Up to 8 GPIO pins. • CD-RW devices
• Use a single crystal for both USB • DVDs
and SATA • Removable media devices
• Supports SATA (bridged SATA) • BD(Blu-ray Disc) Drive
Hard Disk drives, CD-RW
devices, DVDs, Removable media
devices, BD drive(Blue Ray)
Block Diagram

Register SATA
USB USB PHY0 Disk
Port PHY

Command
Buffers SATA Control SATA
Block Link Layer

USB
Core
Data Buffer
(2K Bytes)
SATA
Data Flow
Transport Layer
Control

ROM I2C NVRAM


uP8051
12K Bytes Interface 2k-bits

You might also like