Scribd
Upload
2K views4 pages

Intelligent Wireless Talking Bus Stop

This document describes an intelligent wireless talking bus stop system to help blind people determine which bus to take. The system uses RFID technology and consists of an RFID tag at the bus stop that communicates with an RFID receiver and speaker unit carried by the blind traveler. When within 5km of the bus stop, the receiver unit will provide audio information about the bus route and destination to help the blind person know which bus to take. The system has several modules including an RF frame format, I2C protocol, LCD display, and is designed using Embedded C51 and KEIL compiler software.

Uploaded by

robomind
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views4 pages

Intelligent Wireless Talking Bus Stop

This document describes an intelligent wireless talking bus stop system to help blind people determine which bus to take. The system uses RFID technology and consists of an RFID tag at the bus stop that communicates with an RFID receiver and speaker unit carried by the blind traveler. When within 5km of the bus stop, the receiver unit will provide audio information about the bus route and destination to help the blind person know which bus to take. The system has several modules including an RF frame format, I2C protocol, LCD display, and is designed using Embedded C51 and KEIL compiler software.

Uploaded by

robomind
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

INTELLIGENT WIRELESS TALKING BUS STOP

AIM: This system is mainly used to find the Bus where he bus is going for Blind people.

Block Diagram:

BUS
STOP
RFID

5KM

Bus Stop A Bus Stop B Bus Stop C

BUS

BUS – RFID

BUS Blind
Traveller
Block Diagram of Wireless Transmitter Unit:

LCD

RF Encoder
AUX Circuit

RF TX
Block Diagram of Wireless Receiver Unit:

RF Decoder

Speaker
AMP

AUX
DSP RF RX Circuits
Speech IC

2. Overview of Projects

This system is divided into six modules,


1) RF Frame Format
2) I2C Protocol
3) LCD Display unit
.

3. Design Requirement:
Software Requirement:
1) Embedded C51- KEIL-3 –cross compiler
The Research on Blind Navigation System Based on RFID
Bin Ding; Haitao Yuan; Xiaoning Zang; Li Jiang
Wireless Communications, Networking and Mobile Computing, 2007. WiCom 2007. International Conference on
Volume , Issue , 21-25 Sept. 2007 Page(s):2058 - 2061
Digital Object Identifier 10.1109/WICOM.2007.514
Publication Date: 21-25 Sept. 2007
On page(s): 2058-2061
Location: Shanghai,
ISBN: 978-1-4244-1311-9
INSPEC Accession Number: 10046611
Digital Object Identifier: 10.1109/WICOM.2007.514
Date Published in Issue: 2007-10-08 09:40:32.0
Summary:Based on the investigation about daily activity characteristics and modes of the blind, the study found that the main difficulties
encountered in a trip of the blind included walking on the road, finding way, taking a bus and looking for usual life-arena. After analyzing the
research and application of actual blind navigation technologies, to solve the demands and difficulties in the blind trip, the study presents a blind
navigation system based on Radio Frequency Identification (RFID), wireless and mobile communications technologies. The system consists of
RFID tag, portable reader which can be integrated into the blind cane, mobile phone, Call Center and center information servers. Using this
system, the blind are able to know their location, condition of roads, vicinity buildings, and inquire about the optimal routes to their destination
and available vehicles. The technologies used in this navigation system are mature, which ensures the system is practical, universal and with
perfect function.

You might also like