Scribd
Upload
863 views3 pages

Grade 4.6 Bolts in S275 Steel: S - 2 T - 2 BB - 2 Bs - 2

The document provides specifications for grade 4.6, 8.8 bolts in S275 and S355 steel. It includes information on: - Tensile and shear stresses - Tension and shear capacities - Nominal and exact tension capacities - Minimum bearing capacities for various bolt diameters and plate thicknesses

Uploaded by

vthamarai999543
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
863 views3 pages

Grade 4.6 Bolts in S275 Steel: S - 2 T - 2 BB - 2 Bs - 2

The document provides specifications for grade 4.6, 8.8 bolts in S275 and S355 steel. It includes information on: - Tensile and shear stresses - Tension and shear capacities - Nominal and exact tension capacities - Minimum bearing capacities for various bolt diameters and plate thicknesses

Uploaded by

vthamarai999543
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

Grade 4.

6 bolts in S275 Steel


Ps = 160 Nmm-2 Pt = 240 Nmm-2 Pbb = 460 Nmm-2 Pbs = 460 Nmm-2
Bearing Capacity in kN (Minimum of Pbb, Pbs)
Tensile End distance equal to 2 x Bolt diameter
Diameter of
stress Tension Capacity Shear Capacity
the Bolt
area Thickness in mm of ply passed through
Nominal Exact
At Single shear Double shear
(mm) 0.8Atpt Atpt
(mm2) Ps kN 2Ps kN
Pnom kN Pt kN 5 6 7 8 9 10 12 15 20 25 30
12 84.3 16.2 20.2 13.5 27.0 27.6 33.1 38.6 44.2 49.7 55.2 66.2 82.8 110.4 138.0 165.6
16 157 30.1 37.7 25.1 50.2 36.8 44.2 51.5 58.9 66.2 73.6 88.3 110.4 147.2 184.0 220.8
20 245 47.0 58.8 39.2 78.4 46.0 55.2 64.4 73.6 82.8 92.0 110.4 138.0 184.0 230.0 276.0
22 303 58.2 72.7 48.5 97.0 50.6 60.7 70.8 81.0 91.1 101.2 121.4 151.8 202.4 253.0 303.6
24 353 67.8 84.7 56.5 113.0 55.2 66.2 77.3 88.3 99.4 110.4 132.5 165.6 220.8 276.0 331.2
27 459 88.1 110.2 73.4 146.9 62.1 74.5 86.9 99.4 111.8 124.2 149.0 186.3 248.4 310.5 372.6
30 561 107.7 134.6 89.8 179.5 69.0 82.8 96.6 110.4 124.2 138.0 165.6 207.0 276.0 345.0 414.0

Grade 4.6 bolts in S355 Steel (Under match and do not use)
Ps = 160 Nmm -2
Pt = 240 Nmm -2
Pbb = 460 Nmm-2 Pbs = 550 Nmm-2
Bearing Capacity in kN (Minimum of Pbb, Pbs)
Tensile End distance equal to 2 x Bolt diameter
Diameter of
stress Tension Capacity Shear Capacity
the Bolt
area Thickness in mm of ply passed through
Nominal Exact
At Single shear Double shear
(mm) 0.8Atpt Atpt
(mm2) Ps kN 2Ps kN
Pnom kN Pt kN 5 6 7 8 9 10 12 15 20 25 30
12 84.3 16.2 20.2 13.5 27.0 27.6 33.1 38.6 44.2 49.7 55.2 66.2 82.8 110.4 138.0 165.6
16 157 30.1 37.7 25.1 50.2 36.8 44.2 51.5 58.9 66.2 73.6 88.3 110.4 147.2 184.0 220.8
20 245 47.0 58.8 39.2 78.4 46.0 55.2 64.4 73.6 82.8 92.0 110.4 138.0 184.0 230.0 276.0
22 303 58.2 72.7 48.5 97.0 50.6 60.7 70.8 81.0 91.1 101.2 121.4 151.8 202.4 253.0 303.6
24 353 67.8 84.7 56.5 113.0 55.2 66.2 77.3 88.3 99.4 110.4 132.5 165.6 220.8 276.0 331.2
27 459 88.1 110.2 73.4 146.9 62.1 74.5 86.9 99.4 111.8 124.2 149.0 186.3 248.4 310.5 372.6
30 561 107.7 134.6 89.8 179.5 69.0 82.8 96.6 110.4 124.2 138.0 165.6 207.0 276.0 345.0 414.0
Grade 8.8 bolts in S275 Steel (Over match, can use but not effective)
Ps = 375 Nmm -2
Pt = 560 Nmm -2
Pbb = 1000 Nmm-2 Pbs = 550 Nmm-2
Bearing Capacity in kN (Minimum of Pbb, Pbs)
Tensile End distance equal to 2 x Bolt diameter
Diameter of
stress Tension Capacity Shear Capacity
the Bolt
area Thickness in mm of ply passed through
Nominal Exact
At Single shear Double shear
(mm) 0.8Atpt Atpt
(mm2) Ps kN 2Ps kN
Pnom kN Pt kN 5 6 7 8 9 10 12 15 20 25 30
12 84.3 37.8 47.2 31.6 63.2 27.6 33.1 38.6 44.2 49.7 55.2 66.2 82.8 110.4 138.0 165.6
16 157 70.3 87.9 58.9 117.8 36.8 44.2 51.5 58.9 66.2 73.6 88.3 110.4 147.2 184.0 220.8
20 245 109.8 137.2 91.9 183.8 46.0 55.2 64.4 73.6 82.8 92.0 110.4 138.0 184.0 230.0 276.0
22 303 135.7 169.7 113.6 227.3 50.6 60.7 70.8 81.0 91.1 101.2 121.4 151.8 202.4 253.0 303.6
24 353 158.1 197.7 132.4 264.8 55.2 66.2 77.3 88.3 99.4 110.4 132.5 165.6 220.8 276.0 331.2
27 459 205.6 257.0 172.1 344.3 62.1 74.5 86.9 99.4 111.8 124.2 149.0 186.3 248.4 310.5 372.6
30 561 251.3 314.2 210.4 420.8 69.0 82.8 96.6 110.4 124.2 138.0 165.6 207.0 276.0 345.0 414.0

Grade 8.8 bolts in S355 Steel


Ps = 375 Nmm-2 Pt = 560 Nmm-2 Pbb = 1000 Nmm-2 Pbs = 550 Nmm-2
Bearing Capacity in kN (Minimum of Pbb, Pbs)
Tensile End distance equal to 2 x Bolt diameter
Diameter of
stress Tension Capacity Shear Capacity
the Bolt
area Thickness in mm of ply passed through
Nominal Exact
At Single shear Double shear
(mm) 0.8Atpt Atpt
(mm2) Ps kN 2Ps kN
Pnom kN Pt kN 5 6 7 8 9 10 12 15 20 25 30
12 84.3 37.8 47.2 31.6 63.2 33.0 39.6 46.2 52.8 59.4 66.0 79.2 99.0 132.0 165.0 198.0
16 157 70.3 87.9 58.9 117.8 44.0 52.8 61.6 70.4 79.2 88.0 105.6 132.0 176.0 220.0 264.0
20 245 109.8 137.2 91.9 183.8 55.0 66.0 77.0 88.0 99.0 110.0 132.0 165.0 220.0 275.0 330.0
22 303 135.7 169.7 113.6 227.3 60.5 72.6 84.7 96.8 108.9 121.0 145.2 181.5 242.0 302.5 363.0
24 353 158.1 197.7 132.4 264.8 66.0 79.2 92.4 105.6 118.8 132.0 158.4 198.0 264.0 330.0 396.0
27 459 205.6 257.0 172.1 344.3 74.3 89.1 104.0 118.8 133.7 148.5 178.2 222.8 297.0 371.3 445.5
30 561 251.3 314.2 210.4 420.8 69.0 99.0 115.5 132.0 148.5 165.0 198.0 247.5 330.0 412.5 495.0

You might also like