Scribd
Upload
49 views3 pages

Machine Time

The document provides formulas for calculating the machine time for various machining operations including longitudinal turning, facing, drilling, and milling. The common factor is that machine time is calculated as the length traveled by the tool divided by the feed rate. Specific formulas are given to calculate machine time depending on whether the rpm is known or unknown for each operation type.

Uploaded by

joysudha
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
49 views3 pages

Machine Time

The document provides formulas for calculating the machine time for various machining operations including longitudinal turning, facing, drilling, and milling. The common factor is that machine time is calculated as the length traveled by the tool divided by the feed rate. Specific formulas are given to calculate machine time depending on whether the rpm is known or unknown for each operation type.

Uploaded by

joysudha
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Machine time = length to be machined / Feed rate

Longitudinal turning - ( rpm known ) 


l = length to be machined
Sr = Feed rate
n = rpm
Machine Time =  l / Sr x n 

Longitudinal turning - ( rpm unknown ) 


d = Diameter
v = Cutting speed
Sr = Feed rate
l = Length to be machined
Machine time = l x pi x d / Sr x v

Facing 
Machine time = r / sr x n

 
Drilling operation

Machine time = length of tool traveled / Feed rate


Machine time ( Known rpm )
L  = length of tool travel ( l + 0.3 d )
S = Feed rate
Sr = Feed per revolution
n = rpm
d = Diameter of drill
Machine Time =  L / Sr x n 

Machine time - ( rpm unknown ) 


L  = length of tool travel ( l + 0.3 d )
V = cutting speed
Sr = Feed per revolution
n = rpm
d = Diameter of drill
V= pi x d x n / 1000
n=Vx1000/Pi x d
Machine time = l x pi x d / Sr x v x1000

 
Milling operation

Machine time = length of tool traveled / Feed rate


machine time = L / s

You might also like