Scribd
Upload
165 views

Bulletproof FTP Server Tutorial

This tutorial provides instructions for configuring a Bulletproof FTP Server to improve security and control access. It recommends setting options to refuse multiple connections from the same IP, block banned IPs, enable anti-hammering protections, and show relative file paths to users. Basic steps include starting the program, editing server and connection settings, adding user accounts, and configuring advanced options like changing the listening port or restricting uploads/downloads. The tutorial stresses the importance of monitoring the server and banning IPs of uncooperative users.

Uploaded by

MITHUN K
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
165 views

Bulletproof FTP Server Tutorial

This tutorial provides instructions for configuring a Bulletproof FTP Server to improve security and control access. It recommends setting options to refuse multiple connections from the same IP, block banned IPs, enable anti-hammering protections, and show relative file paths to users. Basic steps include starting the program, editing server and connection settings, adding user accounts, and configuring advanced options like changing the listening port or restricting uploads/downloads. The tutorial stresses the importance of monitoring the server and banning IPs of uncooperative users.

Uploaded by

MITHUN K
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

thanks to someone for this tut.

Configuring your Bulletproof FTP Server Tutorial


I am not sure where I found this tutorial, It s been a while It might even have been
here... ..So if it is one of yours, my hat goes off to you once again....
After reading the excellent tutorial on "Creating an FTP" that Norway posted
(I would suggest reading and following his tutorial first, then following up wit
h this one)
I thought that perhaps this tutorial might be pretty helpful for those intereste
d in knowing how to configure their Bulletproof FTP Server that don't already kn
ow how... Here's how to get started
This is for the BulletProof FTP Server 2.10. However, It should work fine on mos
t following versions as well.
I'm assuming you have it installed and cracked.
Basics
1. Start the program.
2. Click on Setup > Main > General from the pull-down menu.
3. Enter your server name into the 'Server Name' box. Under Connection set the Ma
x number of users" to any number. This is the limit as to how many users can be
on your sever at any time.
4. Click on the 'options' tab of that same panel (on the side)
5. Look at the bottom, under IP Options. Put a check in the box Refuse Multiple C
onnections from the same IP . This will prevent one person from blocking your FTP
to others.
6. Also put a check in the 'Blocked Banned IP (instead of notifying client). VER
Y IMPORTANT! If somebody decides to 'Hammer' (attempt to login numerous times VE
RY quickly) your server/computer may CRASH if you don't enable this.
7. Click on the 'advanced' tab
8. At the bottom again look at the 'hammering area'
9. Enable 'anti-hammer' and 'do not reply to people hammering' Set it for the fo
llowing: Block IP 120 min if 5 connections in 60 sec. You can set this at whatev
er you want to but that is pretty much a standard Click 'OK'
Adding Users
11. Setup > User accounts form pull-down.
12. Right click in the empty 'User Accounts' area on the right: choose 'Add'
13. Enter account name. (ie: logon name)
14. In the 'Access rights' box right click: choose Add .
15. Browse until you find the directory (folder) you want to share. In the right
column you will see a bunch of checkboxes. Put a check in the following ones: R
ead, Write, Append, Make, List, and +Subdirs. Press 'select'.
16. Enter a password for your new FTP account.
17. Click on 'Miscellaneous' in the left column. Make sure 'Enable Account' is s
elected. Enable 'Max Number of Users' set it at a number other than zero. 1 for
a personal account and more that one for a group account. Enable 'Max. no. of co
nnects per IP' set it at 1
18. Under 'Files' enable 'show relative path' this is a security issue. A FTP cl
ient will now not be able to see the ENTIRE path of the FTP. It will only see th
e path from the main directory. Hide hidden flies as well.
Put a tick in both of these.
Advanced:
You don't need to do any of this stuff, but It will help tweak your server and h
elp you maintain order on it. All of the following will be broken down into smal
l little areas that will tell you how to do one thing at a time.
Changing the Port
The default port is always 21, but you can change this. Many ISPs will routinely
do a scan of its own users to find a ftp server, also when people scan for pubs
they may scan your IP, thus finding your ftp server. If you do decide to change
it many suggest that you make the port over 10,000.
1. Setup > Main > General
2. In the 'Connection' Area is a setting labeled 'Listen on Port Number:'
3. Make it any number you want. That will be your port number.
4. Click 'OK'
Making an 'Upload Only' or 'Download Only' ftp server.
This is for the entire SERVER, not just a user.
1. Setup > Main > Advanced
2. In the advanced window you will have the following options: uploads and downl
oads, downloads only, and uploads only. By default upload and download will be c
hecked. Change it to whatever you want.
3. Click 'OK

While you are running your server, usually you will end up spending more time at
your computer than you normally do. Don't be afraid to ban IP's. Remember, on y
our FTP you do as you want.
When you are online you must also select the open server button next to the on-l
ine button which is the on-line Button
You also have to use the actual Numbered ip Address ie: 66.250.216.67
Or even Better yet, get a no-ip.com address

You might also like