Scribd Logo
Upload

Welcome to Scribd!

  • 113 views

    SGE550 Data Sheet

    Uploaded by

    mohamedkhalifeh
    This document provides specifications for the SCANGEN SGE550 diesel generator set. It includes details on the engine such as its displacement, configuration, bore, stroke, injection system, lubrication oil specifications, and cooling system. Performance specifications are listed for both 50Hz and 60Hz operation at prime and standby power ratings. Additional specifications cover the alternator, insulation class, excitation type, voltage regulation, and electrical configuration. Definitions of prime and standby power ratings are also provided.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    SGE550 Data Sheet

    Uploaded by

    mohamedkhalifeh
    113 views1 page
    This document provides specifications for the SCANGEN SGE550 diesel generator set. It includes details on the engine such as its displacement, configuration, bore, stroke, injection system, lubrication oil specifications, and cooling system. Performance specifications are listed for both 50Hz and 60Hz operation at prime and standby power ratings. Additional specifications cover the alternator, insulation class, excitation type, voltage regulation, and electrical configuration. Definitions of prime and standby power ratings are also provided.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the SCANGEN SGE550 diesel generator set. It includes details on the engine such as its displacement, configuration, bore, stroke, injection system, lubrication oil specifications, and cooling system. Performance specifications are listed for both 50Hz and 60Hz operation at prime and standby power ratings. Additional specifications cover the alternator, insulation class, excitation type, voltage regulation, and electrical configuration. Definitions of prime and standby power ratings are also provided.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    113 views1 page

    SGE550 Data Sheet

    Uploaded by

    mohamedkhalifeh
    This document provides specifications for the SCANGEN SGE550 diesel generator set. It includes details on the engine such as its displacement, configuration, bore, stroke, injection system, lubrication oil specifications, and cooling system. Performance specifications are listed for both 50Hz and 60Hz operation at prime and standby power ratings. Additional specifications cover the alternator, insulation class, excitation type, voltage regulation, and electrical configuration. Definitions of prime and standby power ratings are also provided.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    SCANGEN SGE550 (50Hz) / SGE550 (60Hz) Engine Specification : DC16 44A (10-27)

    Engine -
    General Data
    Pistion displacement lit 15.6
    Number of cylinder and configuration 8V
    Bore x Stroke mm 127 x 154
    Injection System Diesel
    Electronic unit injection
    Lub Oil grade At least: ACEA E3, E4 or E5
    Capacity lit 35
    Starting System V 24V, Electric
    Charging Generator V, A 28V , 100A
    Fuel Diesel fuel
    Engine cooling system Water
    Compression ratio 16:1
    Engine - 50Hz, 1500 rpm 60Hz, 1800 rpm
    Specifications : Prime Standby Prime Standby
    Gross power kWm 481 523 481 523
    Specific fuel consumption full load g/kWh 195 196 196 196
    to cooling water 179 196 181 197
    Heat rejection to exhaust gas kW 350 382 346 376
    to radiation 39 43 37 40
    Air consumption kg/min 37 40 44 46
    - max. pressure loss mmWc 500 500
    Exhaust flow kg/min 39 42 46 48
    - max. back pressure mmWc 500 500
    Coolant pump flow lit/min 368 443
    type pusher pusher
    diameter mm 965 965
    Coolant fan power kW 13 12
    speed ratio crank : fan 1:1 1 : 0.8
    free air flow m3/s 9.8 8.5
    Radiator front area m2 1.24 1.24
    Charge Air Cooling air - air
    "Air-on" Temperature °C 50 50
    - max. pressure reserve mmWc 30 25
    Alternator / Genset -
    Specifications :
    Insulation Class H/F
    Excitation brushless, rotating exciter (with AVR)
    Number of poles 4
    Power factor 0.8 (lagging)
    Volatge regualtion % Within 1.5
    Phase and wire 3-phase, 4-wires

    RATING DEFINITIONS
    PRIME POWER: These rating are applicable for supplying continuous electrical power (at variable load) in lieu of
    commerically purchased power. There is no limitation to the annual hours of operation and this mode
    can supply 10% overload power for 1 hour in 12 hours. Maximum 75% load factor.
    STANDBY POWER: These rating are applicable for supplying continuous electrical power (at variable load) in the event of a
    utility power failure. No overload is permitted on these ratings. Maximum 85% load factor is peak
    continuous rated (as defined in ISO-8528-3) at 27 deg C
    NOTE*: "Air-on" refers to the real average temperature of cooling air that reaches the cooling system

    ** Due to continuous product improvements, specification are subjected to change

    You might also like