Scribd Logo
Upload

Welcome to Scribd!

  • 556 views

    PVM 9044qm No Colour

    Uploaded by

    Hussain Kalesha
    After many hours of use, the picture may become monochrome. This is caused by a change in the impedance of trimmer capacitors CV101 and CV102 on the B board which in turn causes the crystal oscillator for the chroma decoder to stop. To correct this condition perform the following modification.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    PVM 9044qm No Colour

    Uploaded by

    Hussain Kalesha
    556 views1 page
    After many hours of use, the picture may become monochrome. This is caused by a change in the impedance of trimmer capacitors CV101 and CV102 on the B board which in turn causes the crystal oscillator for the chroma decoder to stop. To correct this condition perform the following modification.

    Original Title

    Pvm 9044qm No Colour

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    After many hours of use, the picture may become monochrome. This is caused by a change in the impedance of trimmer capacitors CV101 and CV102 on the B board which in turn causes the crystal oscillator for the chroma decoder to stop. To correct this condition perform the following modification.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    556 views1 page

    PVM 9044qm No Colour

    Uploaded by

    Hussain Kalesha
    After many hours of use, the picture may become monochrome. This is caused by a change in the impedance of trimmer capacitors CV101 and CV102 on the B board which in turn causes the crystal oscillator for the chroma decoder to stop. To correct this condition perform the following modification.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Sony Broadcast & Professional Europe

    E-BVM-059

    COLOUR LOSS

    Product: BVM-9044D Serial No: 2005701 and higher 21 Aug 1998

    1 DESCRIPTION
    After many hours of use, the picture may become monochrome. This is caused by a change in the impedance
    of trimmer capacitors CV101 and CV102 on the B board which in turn causes the crystal oscillator for the
    chroma decoder to stop. To correct this condition perform the following modification.

    Note: In some cases, colour returns when the monitor is subjected to vibration or physical shock. However, it
    is still recommended that the modification described in this Engineering Bulletin is performed.

    2 MODIFICATION PROCEDURE
    1. Replace CV101 on the B board.
    2. Replace CV102 on the B board.
    3. Solder a 5pF in parallel with CV101.
    4. Solder a 5pF in parallel with CV102.

    3 ADJUSTMENT PROCEDURE
    Perform the VXO ADJUSTMENT (CV101, CV102) as described in Section 4-7 B BOARD ADJUSTMENTS in
    the Operation and Maintenance Manual.

    4 PARTS REQUIRED
    Table 1: Parts Required

    Qty Description Part Number


    2 Capacitor, trimmer ceramic, 10pF 1-141-304-11
    2 Capacitor, ceramic, 5pF/50V 1-101-997-21

    FOR INFORMATION ONLY


    DPMO98-010 1 of 1 8045
    This bulletin is published by the Engineering Communications Department of Sony Broadcast & Professional Europe as an aid to the servicing, alignment or modification of Sony
    equipment and is to be used at the user’s discretion. Sony assumes no obligation hereby as to the supply of parts, payment for modifications, replacement of units or otherwise.
    © 1998 Sony Broadcast & Professional Europe. Jays Close, Viables, Basingstoke, Hampshire. RG22 4SB. United Kingdom. Telephone: (01256) 355011, Fax: (01256) 474585.

    You might also like