CRL Catalogo - hr09 - 021609

ARCHITECTURAL HR09 CATALOG
05 52 00
RAILING SYSTEMS
METAL RAILINGS
05 70 00
ARCHITECTURAL AND
ORNAMENTAL RAILINGS
05 73 00
HAND RAILS & RAILINGS
• Glass Railings • Aluminum Railing

• Cap Railing • Windscreens
• Post Railing • Gate Systems
• Hand Railing • Glass Connectors
C.R. LAURENCE COMPANY

crlaurence.com
A Letter From The President
C.R. Laurence Company continues to offer the glazing industry innovative, high quality
products as it has for over 40 years, but with an expanding emphasis on Architectural
Hardware and services. From our state of the art 270,000 square foot QS-9000 and ISO
9001 Certified manufacturing facility in Southern California to our 21 distribution locations
throughout the United States, Canada and Australia, our goal is to provide products of the
highest quality and value, and to maintain our leadership position in the glazing industry.
In this catalog you will find an extensive selection of architectural railing systems and
related hardware for the construction of beautiful, code compliant railings and balustrades,
including our very popular Aluminum Railing Systems, and our impressive line of
Windscreens. We've expanded our complete line of Glass Railing Hardware, from Shoe
Bases to Cap Rails, simplifying your hardware selection process for balustrades, hand rails,
and guard rails. We have also included our newest product lines, the CRL Stainless Steel
Post Railing Kits, Wood Cap Rails and Hand Rails, as well as our rapidly growing line of
Swinging Gates.
CRL supports our extensive product lines with a Technical Sales Department
available from 6:00 a.m. to 5:00 p.m. Pacific Time, Monday through Friday, and 7:00 a.m.
to 12:00 p.m. on Saturday. For additional information, contact CRL Technical Sales at
(800) 421-6144 in the United States, (877) 421-6144 from Canada, or (323) 588-1281
from outside the United States and Canada, and ask for Ext. 7730. We also invite you Lloyd W. Talbert
to visit the CRL web site at crlaurence.com to see the over 38,000 products in our
Online Catalog.
President and C.O.O.
HR09 TABLE OF CONTENTS For Pricing on CRL Products, Call Toll Free
(800) 421-6144, or Visit crlaurence.com
GLASS RAIL BASE SHOES CAP RAILING SYSTEMS

PAGES R509-R551 PAGES R552-R585
GATE SYSTEMS COMPONENT RAILING SYSTEMS

PAGES R586-R597, R778-R786 PAGES R598-R613, R738-R745
POST RAILING SYSTEMS SRS STANDOFF RAILING SYSTEM

PAGES R614-R638, PAGES R640-R643
R644-R651
HAND RAILING SYSTEMS ALUMINUM RAILING SYSTEMS

PAGES R652-R675 PAGES R676-R737
ALUMINUM WINDSCREENS RAILING TOOLS, FASTENERS,

PAGES R748-R773 AND ACCESSORIES
PAGES R803-R823
LOG ON TO crlaurence.com FOR BUSINESS-TO-BUSINESS SERVICES

PHONE (800) 421-6144 | FAX (800) 262-3299 TOLL FREE FROM ANYWHERE IN THE U.S.A. OR CANADA | R501
WELCOME TO THE CRL ONLINE CATALOG Contact CRL Tech Sales for complete planning
and ordering assistance on your next railing job.
Welcome to the C.R. Laurence
Online Catalog
•Thousands of Pages of Quality Products and Helpful
Information are Just Clicks Away, Anytime, and at
Your Convenience
What's the best way to shop at C.R. Laurence? Visit the Online Catalog
at crlaurence.com. Our Online Catalog brings you thousands of pages
from our many printed catalogs. All of them in full color, and linked to our
ordering module so you can browse and shop at any time it's convenient.
You can check prices, review stock levels, and get the most complete and
up-to-date details on the products we offer. And you can do it all from
any PC.
Our "self-service" web site and Online Catalog are the most
comprehensive and convenient up-to-date information sources we can offer.
One of the great things about having an Online Catalog is that it is limitless
in possibilities. Explore some of our most popular product lines or review
individual products. CRL has over 38,000 of them organized by specific
product categories.
What better way to shop! The convenience of having all CRL catalogs
combined into one Online Catalog. It's the quick and easy way to find just
what you need, available at your convenience, whenever you're ready.
Please review the following pages for easy to follow instructions on how
to do business at crlaurence.com. And if you ever need assistance, just
contact us over the Internet or by toll free phone. We'll be glad to help.

R502 | PHONE (800) 421-6144 | FAX (800) 262-3299 TOLL FREE FROM ANYWHERE IN THE U.S.A. OR CANADA
WELCOME TO THE CRL ONLINE CATALOG For Pricing on CRL Products, Call Toll Free
Introduction
Of all the products we bring you, our Online Catalog may be What you will find at crlaurence.com is a link to who we are,
the most important. We know that the most efficient way for our what we do, and what we have to offer our customers. The CRL
customers to shop at CRL is by using this carefully planned and "self-service" web site allows us to use the powers of Electronic
thoroughly prepared Online Catalog to make it easy for them to Commerce to bring you closer to all of the products and services
find exactly what they need. C.R. Laurence Company is that we offer.
committed to making our Online Catalog your best source
for information and technical support.
We take a Business-to-Business approach of conducting your orders and submit them 24 hours a day, seven days
business over the Internet because it gives us so many ways a week, at your convenience. You can review over 38,000
to connect with you. Methods of searching for and ordering products we make available, including pricing and current
products that just a few years ago would have been impossible stock availability.
were it not for the versatility of this powerful tool. All of this and more is available to CRL customers who
Empowerment is what a good web site is all about. We let have signed in to our web site and become part of the
you make the decisions that will best serve you. You can build World of crlaurence.com.
User's Guide Menu to CRL Online (Cat. No. UG08)

• How to Create a User Name and Password • How to Place an Order
• How to Sign In and Recover Your Information • How to Request a Quote
• How to Search for Products • How to Request Product Data Sheets
• How to Check Prices • How to Pay Your Statement Online
• How to Check Stock • How to Contact
The User's Guide Menu is easy to learn and a quick way to locate necessary information. We’ve written step-by-step
instructions to help you navigate through our Online Catalog, Cat. No. UG08. Ask for your free copy today!

CRL HAND RAILS ONLINE Contact CRL Tech Sales for complete planning
CRL Hand Rails Online

Web-Based Design Program
for Material Sizing
• The Design and Layout Software new
Program Tailored to Professionals There's
Doing Hand Rails, Guard Rails, Glass Nothing Else
Balustrades, and Windscreens Like Hand Rails
• Innovative Web-Based Program That Online!
Generates Railing Layouts, Parts Lists,
Ask About
and Material Cut Sizes Our FREE
• Six Easy Steps to Design a Railing 30 Day
System Trial Offer
• Generates Accurate Quotes Quickly
• Continual Upgrades to Program Since
it is Web-Based S
• Default Settings Can Be Customized to by
Suit Your Needs Hand Rails Online is the Newest Addition to Our
Hand Rails Online is a web-based design program that allows you Family of Online Services, Including "All-Glass"
to enter your railing layout dimensions for a particular job, then Storefronts Online® and Showers Online
calculates the stock length of material and all hardware required to Hand Rails Online is available only to CRL Authorized Dealers.
complete your project. It also displays and prints detailed information You must have Internet access to use it. We offer live technical
such as post spacing, railing heights, and bottom rail clearances. support to help you learn the process. For additional information,
Hand Rails Online allows you to design and layout almost any contact CRL Technical Sales at (800) 421-6144 in the U.S.,
configuration in minutes. Default settings and standard clearances (877) 421-6144 from Canada, or (323) 588-1281 International,
can be customized within the program to suit the user's own needs. and ask for Ext. 7730. You can also e-mail us through our web
A quote sheet and layout drawings can be generated for a site at crlaurence.com. From the home page click on Contact
professional and personal presentation to a prospective customer. Us, and then click on Technical Sales.
These are Sample Layouts Showing a Few of the Great Benefits of Our New Hand Rails Online Program
Railing Layout and Specifications Sheet Hardware List with Material Cut List Complete Material Quote

CRL HAND RAILS ONLINE For Pricing on CRL Products, Call Toll Free
CRL Hand Rails Online

Step-by-Step Screen Sequence from the Design Stage to a
Complete Railing Layout With a Listing of All Required Hardware
Step 1: Step 2:
Enter Your Customer Information Enter Railing Type and Installation Questions
Step 3: Step 4:
Lay Out and Design Railing Modify and Edit Properties
Step 5: Step 6:
Modify Heights and Widths Complete and Ready to Use
• Ask CRL Technical Sales About Our FREE 30 Day Trial Offer on Any of Our Online Programs

CRL RAILING SYSTEMS Contact CRL Tech Sales for complete planning
Glossary of Common Railing Terms
A.D.A. - Americans with Disabilities Act, enacted in 1990 by the U.S. Congress, requires that all the
new and certain existing locations of public accommodation and commercial facilities be designed
and constructed to be accessible to, and useable by, the disabled.
Bump Formed - The process of taking a flat sheet of metal and bending it using a brake press with
one or several sets of dies to the desired shape.
Cap Rail - Top member of a glass railing system; may also be considered as hand rail in stair
applications, providing other code requirements are met.
Cap Rail Vinyl - A rigid "U" shaped vinyl extrusion used to protect the edge of the tempered glass
panels in a typical heavy glass railing system.
CMU Wall - Block Wall typically constructed of cinder blocks, steel re-bar, and cement.
Compound Angle - A joining of two angles in two different planes commonly occurring on stairways.
Core Mount - Mounting option for vertical posts or stanchions that requires a large diameter hole
drilled into solid concrete to allow the stanchion or post to be set in place with expanding cement.
This method can also be achieved by using cylindrical forms during the initial pouring process of the
concrete slab or footing. These are later removed, leaving a void for the installation of the stanchion
or post.
Dry Glaze - A method of setting glass using taper sets in place of expansion cement, or using vinyl
gasket material in place of silicone.
Embed - Setting support members in concrete to a specified depth.
Fascia Mount - Mounting option of vertical supports to the face, or side, of a wood deck, concrete
slab or stair stringer.
Glass Baluster - A vertical panel of glass that structurally supports a hand rail or guard rail.
Glass Balustrade - A series of glass balusters that support a hand rail or guard rail.
Guard Rail - A barrier erected along the open edges of a floor opening, wall opening, ramp platform,
runway or other elevated area to guard against falling off the edge.
Hand Rail - A narrow rail mounted parallel to a stair or landing that is used for grasping with the
hand for support; also commonly called a grab rail.
Infill Panel - A non-structural cable, glass or picket panel that is supported within a railing system.
Model Code - Code used for testing purposes of railing systems, comprised of the most uniformly
recognized aspects of the many codes that are currently being followed.
Picket - A narrow vertical member used in series closely spaced between posts of a railing system.
Post - A vertical structural member that supports a top rail, hand rail, and/or infill panel.
Plumb - To set posts in a railing perfectly vertical.
Powder Paint - Very fine dry particles of resin with the pigment color of choice. The resin powder is
applied with an electrostatic spray gun and resin powder. When the resin powder is sprayed it sticks
to the grounded parts, attracting the resin like a magnet. The charged powder adhered to the metal
is then baked at 400°F (204°C) in a special industrial oven. The melted resin fuses to the metal
providing a uniform and durable finish.
Roll Formed - The process of taking a flat sheet of metal, feeding it between successive pairs of
rollers, which progressively shape it to the desired shape.
Smoke Baffle - A ceiling-hung barrier that partitions larger areas of a ceiling into smaller, more
manageable areas that can be monitored by smoke detectors.
Stabilizing End Cap - An end cap designed to attach cap rails to a vertical structural member,
adding rigidity to the overall railing system. Not intended to replace the tempered glass balusters
that support the cap rail.
Stanchion - An internal vertical member that structurally supports a vertical post in a railing or
windscreen system.
Stringer - The supporting member for stair treads, running the length of a stairway, in which treads,
risers, and balustrades are mounted.
Surface Mount - Mounting option that requires drilling into substrate, and then anchoring the
mounting flange of a stanchion or post to the surface of the substrate.
TAPER-LOC™ - A unique dry glaze method that lets you apply precision pressure to lock taper sets
in place, securing the glass in your aluminum base shoe without the use of messy cement.
Windscreen - A dividing structure that protects from wind loads or divides areas for privacy.
Wet Glaze - A method of setting glass that requires pouring expansion cement or applying structural
silicone.

CRL RAILING SYSTEMS For Pricing on CRL Products, Call Toll Free
We Say "Yes" to Custom Fabrication

Although C.R. Laurence Company carries well over 38,000
products, we are aware that stock materials may not be the answer
for every project. We like saying "yes" to our customers. Feel free
to ask for custom made materials you need to complete your job.
Our 270,000 square foot manufacturing facility in Los Angeles,
California allows us to engineer and design custom products.
Help us to say our favorite word, "YES", by asking for a quote on
any custom made product you require.
Code Requirements
Codes and safety regulations are subject to local regulations,
and can often change without prior notice. Therefore, we ask
our customers to contact their local authorities to ensure that
they are in compliance with all rules and regulations before
starting any project.
Common Railing Terminology

Glass Balusters – A vertical panel of glass that structurally
supports a hand rail or guard rail.
Glass Balustrade – A series of glass balusters that support a
hand rail or guard rail.
Guard Rails – A vertical barrier erected along the open edges
of a floor opening, wall opening, ramp platform, runway or
other elevated area to prevent persons from falling off the edge.
Hand Rails – A narrow rail mounted parallel to a stair or landing
that is used for grasping with the hand for support; also
commonly called a grab rail.
See previous page for our Glossary of Common Railing Terms.
Americans with Disabilities Act (A.D.A.)

The Americans with Disabilities Act (A.D.A.), enacted in 1990
by the U.S. Congress, requires that all new and certain existing
locations of public accommodation and commercial facilities be
designed and constructed to be accessible to, and usable by, the
disabled. CRL recommends that the following documents be
used as reference materials when checking for compliance with
A.D.A. requirements: Americans with Disabilities Act Accessibility
Guidelines; ADAAG Manual – A Guide to the Americans with
Disabilities Act Accessibility Guidelines; ICC/ANSI A117. 1-98
Accessible and Usable Buildings and Facilities.
Structural Strength and Testing Data

For the sake of safety, load requirements for Hand Rails and
Guard Rails have increased throughout the years. It is not the
responsibility of CRL to ascertain the suitability of the system of
choice. While CRL systems are developed to meet industry
standards and safety code requirements, you should consult
with a licensed engineer to determine if the product being used
is of appropriate structural strength for your application.
Copies of CRL test reports are available on our web site
at crlaurence.com.

CRL RAILING SYSTEMS Contact CRL Tech Sales for complete planning
(EGR) Elevated Glass Rail System
(EGR) Elevated Glass Rail System
(GRS) Glass Rail System With 2" Cap and LED Insert for (GRS) Glass Rail System With Designer Patterned Glass
Panel Edge Lighting

CRL RAILING SYSTEMS For Pricing on CRL Products, Call Toll Free
CRL Balustrades, Hand Rails, and Guard Rails

Not all CRL Glass Rail Systems and materials are suitable for each Typically, Hand Rail heights range between 34" (863 mm) to
project specification and safety requirement. Since most building 38" (965 mm), while Guard Rails are typically 42" (1066 mm) in
codes make clear the difference between Hand Rails and Guard height. It is sometimes noted in the code that the Guard Rail must
Rails, you should consult the local code. Normally Hand Rails are include a Hand Rail as well. Again, check your local codes before
noted as used for guidance and support, while Guard Rails are beginning any Hand Rail or Guard Rail project.
intended to prevent accidental falls.
Hand Rail Balustrade Guard Rail Balustrade Hand Rail/Guard Rail

The Hand Grip Portion of 1-1/2" (38.1 mm) 1-1/2" (38.1 mm)
the Hand Rails shall not be to 4" (101.6 mm) to 4" (101.6 mm)
less than 1-1/2" (38.1 mm) Guard Rail Cap Guard Rail Cap
and no more than 2" (50.8 mm)
in Cross Sectional Dimension.
The Hand Grip

Portion of the
Hand Rails shall
not be less than
1-1/4" (31.7 mm)
and no more
than 2" (50.8
mm) in Cross
1-1/2" (38.1 mm) Sectional
or 2" (50.8 mm) Dimension
1-1/2"
(38.1 mm)
Top of the Guard Minimum
Rail shall
not be placed
less than
Top of Hand 42" (1066 mm)
Rail shall not be in height
placed less than (commercial);
34" (863 mm) 36" (914 mm) Top of Hand Rail shall
Glass Baluster
nor more than in height not be placed less than
38" (965 mm) (residential) Top of the 34" (863 mm) nor more
above ramp Guard Rail shall than 38" (965 mm)
Glass Baluster
or toe of step not be placed above landings, ramps
less than or the toe of step
42" (1066 mm)
in height
(commercial); Glass Baluster
36" (914 mm)
in height
(residential)
Drawings and Specifications - How to Get Them

Let CRL be a Team Player on All Your Railing Hardware Projects!
C.R. Laurence Company is proud to announce our web site is designed for easy
access to product information and drawings alike! Simply click on "Architectural
Customers" on the crlaurence.com home page and you will find products listed by
CSI section for easy reference. Each product will have links for technical drawings and
written product specifications, which can easily be downloaded into your own working
documents.
Never before have product submittals to architects and general contractors been
so easy. CRL wants you to succeed, and by teaming together we feel projects will
run smooth, on time, and within budget!

CRL GRS GLAZING SYSTEMS Contact CRL Tech Sales for complete planning
A Tale of Two Systems…

A Choice of CRL’s GRS Glass Rail Systems
C.R. Laurence’s entry into the Glass Railing Market is typical of the
approach used in other heavy glass product lines we have carried, such
as our popular DRS Door Rail System for commercial hardware, or our
vast line of Frameless Shower Door hardware and supplies. The lesson
learned is that our customers (and their customers) enjoy options.
The CRL GRS Glass Rail System does just that. The TAPER-LOC™
Dry Glaze System for mounting heavy glass into Base Shoe is our view
of the future. Shown below are a few of the key points to the Dry Glaze
System. The complete story can be read on pages R511 to R518.
For those who prefer to use, or are familiar with, the Wet Glaze
System of pouring cement to mount heavy glass into Base Shoe, we
offer that as well, with some new and improved features. The complete
story for the Wet Glaze System can be read on pages R519 to R525.
TAPER-LOC™ Dry Glaze System Wet Glaze System

See complete details of our GRS TAPER-LOC™ See complete details of our GRS Wet Glaze System
Dry Glaze System on pages R511 to R518. on pages R519 to R525.
• A New Method for Quick • A Tried and True Method to

and Easy Glass Mounting Secure Lites of Glass Into
Into Base Shoe Base Shoe
• Save Over 50% in Labor • Utilizes the CRL Wet Glaze
Alone Versus the Wet Glaze Pump Kit to Deliver Expanding
Cement Pour Method Cement for Bonding Strength
• CRL Offers All the • CRL Offers a Full Set of Tools
Components Necessary and Accessories for You to
to Use This Preferred Complete the Job
Method

CRL GRS GLAZING SYSTEMS For Pricing on CRL Products, Call Toll Free
The CRL TAPER-LOC™ Dry Glaze System

State of the Art Vs. Traditional
Prior to the introduction of the CRL TAPER-LOC™ Dry Glaze there would be less 'spot' touch-up work to be done after the final pour
System, installing glass railings had been a messy, labor-intensive was completed.
ordeal. After attaching the heavy Base Shoe to the structure, workers The process of pouring the cement in itself is very time consuming
would have to go back and seal every joint and fastener in an effort to and quite messy. Even seasoned installers have a hard time keeping
make the Base Shoe watertight. Blocking would then be placed into the Base Shoe and surrounding surfaces free from splatter and
the Base Shoe to ensure there was no contact between the glass and spillage. Also, if the Base Shoe was not properly sealed, leaking
the heads of the fasteners that permeated the bottom of the Base cement could damage the floors and walls. Finally, after time
Shoe. Then the glass would have to be carefully set on top of those consuming clean up of the cement, a cap bead of caulking would
blocks. Numerous wedges would have to be inserted into the bottom have to be applied to both sides of the glass to hide the cement and
base at both sides of the glass in an effort to plumb the glass protect it from the elements in an exterior application.
vertically, as well as to align one glass panel with another. For those applications where the tried and true wet glaze process is
At this point, many installers would do a "pre-pour" of only about a required, CRL has developed a complete line of tools and accessories
third of the required quick-setting cement to secure the glass and allow to reduce the stress and time involved. See the Wet Glaze section
them to remove the temporary wedges. Once again, more wedges on pages R519 to R525 of this catalog, or visit our web site at
would be carefully inserted to maintain the glass in it’s vertical position, crlaurence.com.
but this time they would be smaller so that when they were removed
Now You Have an Alternative

Introducing the CRL TAPER-LOC™ Dry Glaze System. No longer do you have to deal
with messy cement. Our TAPER-LOC™ Dry Glaze System not only self-centers the glass,
but plumbs it as well, and is all done from the floor side of the railing. The key to the system
is plumbing the Base Shoe during installation. When installed properly, the glass panels will
self-center and plumb themselves to match the Base Shoe.
This is done by adhering the required number of L-Pressure Blocks onto the bottom
edge of the glass panel, then positioning the glass into the Base Shoe and simply inserting
the TAPER-LOC™ Tapers opposite the L-Pressure Blocks, and then squeezing the Tapers
together finger tight. Using the Installation/Removal Tool place into position onto the Tapers
and push them down into the base shoe. Next, crank the Torque Wrench until the wrench
clicks and breaks for a few degrees letting you know the Tapers are locked to the correct
TAPER-LOC™ Sets consists
measured torque. Once the Tapers are in the locked position, your glass is not only secure of one L-Pressure Block
but plumb, centered, and ready for a cap bead of caulking or roll-in vinyl. Glass panels are and two Taper Shims
just as easy to remove. Simply reverse the torque setting on the Installation/Removal Tool
and apply force to open the Tapers.

CRL GRS DRY GLAZE SYSTEM Contact CRL Tech Sales for complete planning
The CRL TAPER-LOC™ Dry Glaze System

Using the CRL TAPER-LOC™ Dry Glaze System will easily cut your installation labor time by 50%, and by an even greater percentage on
sloped or stair applications where gravity interferes when trying to pour cement. The CRL TAPER-LOC™ Dry Glaze System has been designed
to accommodate variations in glass thickness and base shoe pocket width, making glass railing installations as easy as Ready, Set, Done.
Ready Set Done
Install TAPER-LOC™ Roll in the Glazing

Adhere TAPER-LOC™ Taper Shims with our Gasket and you're done!
L-Pressure Block to the TLK5 Installation/Removal The TAPER-LOC™
bottom edge of the glass Tool to lock the glass System makes it quick
and lower it into position. securely in place. clean and simple.
Fast, Affordable, Flexible, and Removable, This is the System You Have Been Waiting For!
(Patents Pending)
CRL has designed a complete line of tools, fasteners, and accessories to make installation even easier. These items can be found on
pages R514 to R525. Installation instructions and the use of each tool and accessory are completely described in our TAPER-LOC™ Dry
Glaze System Installation Instructions. Below is a selection of TAPER-LOC™ Dry Glaze System components which can be ordered
separately. You can also view these, along with all our other products at crlaurence.com.
Base Shoe in a Selection of Four Styles to Meet Your Needs. TAPER-LOC™ Tapers and L-Pressure Block for 1/2 (12 mm)
See pages R528 to R535. or 3/4" (19 mm) glass. See page R515.
PAL Plumb/Angle/Level Locator Kit. See page R516. TAPER-LOC™ Installation/Removal Tool with Integrated
Torque Wrench. See page R517.
INSTALLER NOTICE: Base Shoe must be plumb - When using the The glass panels will only be as plumb as the Base Shoe, and this is
TAPER-LOC™ Dry Glaze System, the plumb installation of the Base magnified at the 42" (1066 mm) height. CRL offers a variety of tools
Shoe is very important. Care must be taken to ensure that it is plumb and accessories to make the plumbing process as easy as possible.
to ±1/8" (3 mm) at an extended height of 42" (1066 mm). See pages R514 to R525, and R537.

CRL GRS DRY GLAZE SYSTEM For Pricing on CRL Products, Call Toll Free
The CRL 'All-Glass' Railing System

Installed Using the TAPER-LOC™ Dry Glaze Method
1 Code Considerations 4 Cladding and Finishing Off the Base Shoe
Model Code Regulations usually require 50 lb./ft. uniform loading or
a 200 pound concentrated load to the hand rail at the distance of 42"
(1066 mm) above the floor. In our test, concentrated loads of 400 to
800 pounds (181 to 363 kg) were applied at approximately 42" (1066
mm) above the floor surface. Test results and engineering calculations
show that the strength of our Base Shoe Extrusion and selected
fasteners that were tested would exceed the above mentioned Model
Code loading criteria by a factor of four.
All Base Shoe attachment substrates should be tested for
compliance by a structural engineer because steel, concrete, or other
attachment substrates can change from job to job. Even previously
approved attachment designs should have the job site substrates Metal Cladding is available in a variety of architectural finishes
tested for compliance. Codes, ordinances, and project specifications and styles. It is attached to the Base Shoe using Very Hi-Bond Tape
should also be checked by your local regulatory authorities for and Silicone Sealant (see page R536). Rubber Gasket material
compliance before starting the job. It is the responsibility of the building dresses off the space between the glass and Base Shoe, giving
owner, architect, and installation sub-contractor to comply with a clean, uniform appearance.
applicable building codes and regulations.
CRL’s testing was performed to assure the user that our Base Shoe
and fasteners were tested and passed the code regulations. The
attachment steel plates, welds, concrete make-up, and strength are the
responsibility of the user as these conditions are beyond our control.
5 Attaching the Top Cap Rail
2 Typical Dry Glaze Base Shoe Attachments
Base Shoe attachment is extremely critical to the structural
integrity of a successful installation. The mounting methods
listed below, then shown in detail on pages R526 and R527, are
methods of attachment previously tested. Alternative methods of
attachment may be possible, but should be determined after
consultation with an engineer.
1. Base Shoe Attachment to Concrete (see page R526).
2. Base Shoe Attachment to Weld Blocks/Welded to a Steel Substrate
(see page R526).
3. Base Shoe Attachment to Steel Substrate/Fascia Mount or Angle Mount
(see page R527). Secure the Rigid Vinyl Protective Insert in Cap Rail using our
4. Base Shoe Attachment when Embedded in Concrete (see page R527). 95CBL Silicone (see page R536). Apply a bead of 95CBL Silicone
5. Base Shoe Attachment to Embedded Steel Strip (see page R527). on the top edge of the glass and shims if necessary, and then slip
3 Securing the Glass in the Base Shoe the Cap Rail with Insert down over the glass. Apply even pressure
until Cap Rail is firmly seated. Shim as required and caulk on both
sides of glass at pocket bottom for a clean, finished look.
3
6 Attaching the Hand Rail
After securing the Base Shoe and checking for plumb, place
required quantity of L-Pressure Blocks on the bottom edge of the glass
panel and insert into Base Shoe. Squeeze Tapers together and push
the set half way down into the Base Shoe, as shown above. Place the
Installation/Removal Tool into position onto the Tapers and push them The Railing can be attached to the glass by using Hand Rail
down into the Base Shoe. Crank the Torque Wrench until the wrench Brackets designed for glass attachment. These Brackets require
clicks and breaks for a few degrees, letting you know the Tapers are the glass having a 3/4" (19 mm) hole drilled in it before tempering.
locked to the correct measured torque value requirement.
Complete Installation, Cleaning, and Refinishing Instructions are available on our web site at crlaurence.com

CRL TAPER-LOC™ Dry Glaze Base Shoe Alignment System

Seven Easy Steps to Accurate Alignment
• Accurately Aligns Base Step 1:
Align the "PAL"
Step 2:
Use the "PAL"
Shoe to Ensure Glass Tool with Base Tool to assure
Shoe and point the Base Shoe
Panels Will Be Within toward the is vertically
1/32" (.8 mm) of Plumb Laser Target
set at other
plumb at all
points.
When Installed end of Base
Shoe to follow
the grade.
The CRL TAPER-LOC™ Dry Glaze
Base Shoe Alignment System gives
the installer the ability to accurately Step 3: Step 4:
shim and install the Base Shoe easily Slide Shim Adhere the
Strips under L-Pressure
and quickly. Proper Base Shoe Base Shoe to Blocks to the
alignment is a key element to the fill gaps before bottom of the
TAPER-LOC™ System. fastening. glass panel
Step 5: Step 6: Step 7:

Insert the Taper Place the Crank the Torque
set half way Installation/ Wrench until the
down into the Removal Tool wrench clicks and
Base Shoe as into position breaks a few
shown, opposite onto the Tapers degrees, letting
the L-Pressure and push them you know the
Block, and then down into the Tapers are locked
squeeze the Base Shoe tot he correct
Tapers together measured torque
finger tight
CRL PAL Plumb/Angle/Level CRL PAL Plumb/Angle/Level

Locator Kit Locator Laser Tool
• Plumb and Level all Your Taper-Loc™ Dry • Use For Setting Glass Base Shoe Prior to
Glaze Railing Installs Installing Taper-Loc™ Dry Glaze System
• Works With All CRL Guardrail and Windscreen • Angle Measurements in Degrees
Base Shoes • Displays Angle and Inclination Simultaneously
• Electronic Angle Finder for Custom Corners
This CRL PAL Plumb/Angle/Level Locator Laser Tool displays
and Stairway Applications angle measurements in degrees. Both the angle and inclination
The CRL PAL Plumb/Angle/Level measurements are displayed simultaneously. Includes: Laser Tool
Locator Kit was designed to and Carrying Case.
assist you with level and plumb
installations of all CRL railing
base shoes. This innovative
tool levels the shoe in both
the vertical and horizontal
orientations.
Each kit includes: a Laser
Tool with Case, a Base
Shoe Alignment Adapter, a Laser Target, a
Chalk Wheel, an 8 ounce bottle of Blue Chalk
Refill, a Black Listo Marking Pencil, a Blue Sharpie
Pen, and instructions all in a molded carrying case.
CAT. NO. PAL1K CAT. NO. 406065

CRL TAPER-LOC™ for 1/2" (12 mm)

L-Pressure Block
and 3/4" (19 mm) Tempered Glass
• Eliminates the Use of Messy Cement
• Supports All Mounting Methods With
One Compact Installation/Removal Tool
• Precision Measured Control Gives You
High Quality Installs Every Time
• Installs From the Floor Side of the
Installation TAPER-LOC™ Tapers
CRL's TAPER-LOC™ Taper Set for 1/2" and 3/4" (12 and
19 mm) tempered glass is made up of two Tapers and one
L-Pressure Block. Tapers are made of high strength reinforced
nylon. They expand in thickness when compressed together
with the Cat. No. TLK5 Installation/Removal Tool, mechanically CAT. NO. TL5W10
locking the glass panel into the base shoe.
The TAPER-LOC™ L-Pressure Block is made from high
PANEL WIDTH SUGGESTED TAPER-LOC™ SETS PER PANEL
strength reinforced nylon. It spaces the glass away from the
base shoe's vertical wall on one side and at the bottom edge, 6" to 14" (152 to 356 mm) 1 TL Set
14" to 28" (356 to 711 mm) 2 TL Set
and is attached to the glass panel prior to installing into the
28" to 42" (711 to 1067 mm) 3 TL Set
base shoe with an adhesive tape strip that is pre-installed. It 42" to 56" (1067 to 1422 mm) 4 TL Set
also serves to insulate the glass panels from damage during 56" to 70" (1422 to 1778 mm) 5 TL Set
insertion into the base shoe and, at the same time, center the 70" to 84" (1778 to 2134 mm) 6 TL Set
glass in the pocket. Minimum order is ten Taper Sets.
Ready Set Done
Install TAPER-LOC™ Roll in the Glazing

Adhere TAPER-LOC™ Taper Shims with our Gasket and you're done!
L-Pressure Block to the TLK5 Installation/Removal The TAPER-LOC™
bottom edge of the glass Tool to lock the glass System makes it quick
and lower it into position. securely in place. clean and simple.
TAPER-LOC™ Spacing Guidelines

Maximum center-to-center spacing of the TAPER-LOC™ varies on the applicable codes for the installation.
TYPICAL BASE SHOE ELEVATION

System for 200 Lb. (90 kg) Point Load With 4x Safety Factor
DETAIL WITH TAPER-LOC™ LOCATIONS
TAPER-LOC™ L-PRESSURE BLOCK A: The Taper-Loc™ minimum edge distance
spacing shall not be less than 2" (51 mm)
A B and no more than 8-5/8" (219 mm) from
the edge of glass to edge of the
EDGE DISTANCE SPACING CENTER LINE SPACING
TAPER-LOC™ components.
B: The Taper-Loc™ maximum center-to-center

spacing shall not be less than 7" (178 mm)
and no more than 14" (356 mm) from the
TAPER-LOC™ TAPER SHIMS center line of the TAPER-LOC™ Shims.

CRL Base Shoe Alignment Adapter CRL Laser Target

• Use With 406065 Laser to Adapt to Railing Base Shoe • Use With 406065 Laser to Level Railing
• Plumb and Level all Your Taper-Loc™ Dry Glaze Base Shoes During Install
Railing Installs
The CRL Laser Target was

designed to work with Cat. No.
406065 Laser to assist you with
The CRL Base Shoe Alignment Adapter level and plumb installations of
was designed to attach to Cat. No. 406065 Railing Base Shoes. Minimum
Laser to assist you with level and plumb order is one each.
installations of Railing Base Shoes. Minimum
order is one each. CAT. NO. AMA1 CAT. NO. LT1
Hilti® TE 2-S Deluxe Hilti® TE-C3X Masonry Drill Bits

Rotary Hammer Drill • For Use With EBA334 Hilti®
• Fast and Efficient Drilling HSL-3 Expansion Anchors
• For Drilling Holes 3/16" • Gradient Technology, Superior
to 3/4" (4.8 to 19 mm) Heat Resistance and Ruggedness
into Concrete and Masonry – Even When Drilling into Rebar
• Drilling Into
This Hilti® TE 2-S Deluxe Rotary Hammer Drill is for drilling mainly Concrete
into concrete and masonry, however, its precision hammering feature
and Masonry CAT. NO. DESCRIPTION
allows for drilling into brittle materials like tile and stone as well.
Includes: Tool, side handle, and depth-gauge, all in a plastic carrying EBAD1 12 x 170 mm TE-C3X Masonry Drill Bit
EBAD2 12 x 270 mm TE-C3X Masonry Drill Bit
case. Minimum order is one each. CAT. NO. HRHD1 Minimum order: 1 each.
Hilti® Hole Blow Out Pump Hilti® 3-3/4" HSL-3 Expansion Anchor
• For Cleaning Drilled Holes in • Approved For Use With CRL's Aluminum Railing Systems
Concrete and Masonry • Optimized Design Provides Reliable Performance in
a Wide Range of Applications
The Hilti® Hole Blow Out Pump is an accessory used for cleaning The Hilti® HSL-3 is a 2003 and 2006 IBC compliant, torque
out anchoring holes in concrete and masonry. Minimum order is controlled, heavy-duty expansion bolt designed for high performance
one each. in static and dynamic load applications. Minimum order is ten each.
CAT. NO. EBADP1 CAT. NO. EBA334
CRL TAPER-LOC™ Dry Glaze

Temporary Isolator Setting Tool
• Allows for Temporary Glass Pane
Alignment in Base Shoe
The CRL TAPER-LOC™ Dry Glaze Temporary Isolator Setting

Tool was designed to allow temporary aligning of the glass panel
while the TAPER-LOC™ Tapers are being installed. When placed
between the glass and Base Shoe, the tool temporarily secures
the glass panel in place. By simply rocking it left to right it can be
removed. Adjustments needed for proper alignment can then be
achieved. Minimum order is one each.
CAT. NO. GWST2

CRL TAPER-LOC™ Installation/Removal

Tool Kit for 1/2" and 3/4" Glass Railings
• Works With Cat. No. TL5W10 TAPER-LOC™ Taper Sets
• With Integrated Torque Wrench Designed for Correct
Lock-Up Force
• Supports All Mounting Methods With One Compact
Installation/Removal Tool
• Reduces Installation Time by 50%
This exclusive CRL Taper-Loc™ Tool Kit is designed for tightening TAPER-LOC™ CAT. NO. TLK5
Tapers in the channel of the Base Shoe. It has an integrated Torque Wrench to set
the correct lock-up force to secure 1/2" or 3/4" (12 or 19 mm) tempered glass panels.
Simply set in place and turn the wrench until the clicking sound assures you the CAT. NO. TLB5
Replacement Blades
Tapers have been locked together. Can also be used to remove Tapers if the glass for 1/2" or 3/4"
panel has to be reset or replaced. Works with all sizes of TAPER-LOC™ Tapers. (12 or 19 mm) Glass
Includes: Installation/Removal Tool with Integrated Torque Wrench, Glass Setting
Tool, Glass Setting Roller Blocks, Installation Instructions, all in a Molded Carrying
Case. Note: Not recommended for laminated glass applications. Minimum order is
one each.
1 2 3
How to Remove
TAPER-LOC™
Tapers
To adjust or remove a glass
panel that is already installed
Step 1 Step 2
with TAPER-LOC™ Tapers, For adjustment or removal of glass panel, the Cat. No. Apply the 2" masking tape to the finished cladded
use the standard TLK5 TLK5 Installation/Removal Tool and Cat. No. BL992 2" surface to protect it during this removal/adjustment
Installation/Removal Tool Kit Blue Masking Tape will be required. process.
and follow these steps.
Step 3 Step 3
Insert the Installation/Removal Tool into position, reverse Complete the process by removing the Taper Shims
the torque setting, and apply force to open the Taper from the Base Shoe, then adjust or replace the panel.
Shims.

CRL Top Rubber Gasket for Base Shoe

• Quick and Easy Rubber Gasket for Hand Rail Base Shoe
• Locks in Place When Used With CRL Base Shoe
CRL Top Rubber Gasket finishes off the top of the Base Shoe pocket
after glass has been set. Made of black EPDM rubber, it easily rolls in with
the CRL Vinyl Roller Tool (see below). An alternate method of dressing off
and finishing the top pocket is to use CRL Closed Cell Backer Rod and
95CBL Black Silicone Sealant (see page R536). For more information on
these products, go to crlaurence.com.
CAT. NO. GLASS THICKNESS ROLL LENGTH
BSG100 1/2" or 3/4" (12 or 19 mm) 100' (30.5 m)
BSG500 1/2" or 3/4" (12 or 19 mm) 500' (152.4 m)
Minimum order: 1 roll.
CRL Rigid Rubber Spacing Blocks With Adhesive

• Adhesive Back Holds Spacing Block in Place
• Maintains Even Spacing of Glass Panels
CRL Rigid Rubber Spacing Blocks With Adhesive provide even spacing between
glass panels. They are always necessary on slant stair installations to prevent the
glass panels from sliding down. They are easily installed and perfectly aligned every
time using the CRL Rubber Spacing Block Installation Tool (see below). Adhesive
back holds the Spacing Blocks in position. NOTE: You must cut 5/8" (16 mm) off
the length of the Spacing Block when used with B5L Series Low Profile Base Shoe.
CAT. NO. FITS BASE SHOE SERIES WIDTH THICKNESS LENGTH QTY/PKG
GR5ASB B5S, B5T, and B5L 1/2" (12 mm) 1/4" (6.3 mm) 3-5/16" (84 mm) 100
GR7ASB B7S 3/4" (19 mm) 1/4" (6.3 mm) 3-5/16" (84 mm) 100
Minimum order: 100 each. Blocks must be ordered in increments of 100.
CRL Vinyl Roller Tools CRL Rubber Spacing Block

for Top Rubber Gasket new Installation Tool
• Solid Aluminum Handle With Hard • Makes Positioning of Spacing
Coat Anodized Finish Blocks Fast and Easy
• Easy-Rolling Ball Bearing Wheel Simply push the CRL Rubber Spacing Block, with the adhesive side
out, into the notch at the end of the Installation Tool, and then remove
the release paper. Slip the Tool into Base Shoe pocket and slide it
toward the edge of the glass panel. When contact is made push
CAT. NO. VR04 firmly, and then slide the Tool back. The Rubber Spacing Block is now
in the proper location.
CAT. NO. VR17

These CRL Vinyl Roller Tools are
ideal for inserting Top Rubber Gasket
into Base Shoe. Knurled diamond
grip for sure handling, and a smooth
rolling ball bearing wheel. Now
available in standard 11" (279 mm)
and deluxe 17" (432 mm) lengths.
CAT. NO. DESCRIPTION

VR04 11" (279 mm) Vinyl Roller Tool CAT. NO. DESCRIPTION
VR17 17" (432 mm) Vinyl Roller Tool RSB1T Rubber Spacing Block Installation Tool
Minimum order: 1 each. Minimum order: 1 each.

CRL GRS WET GLAZE SYSTEM For Pricing on CRL Products, Call Toll Free
The CRL GRS Wet Glaze System

• All You Need When the "Wet Pour"
Method is Required or Preferred
Wet Glaze installations basically secure a lite of 1/2" (12 mm) With our Clamp and Alignment Fixture, all attachments, alignment
tempered glass in an engineered and approved Base Shoe with of the glass, and clamping in place can be achieved from the floor
expanding cement. Our goal was to take an industry approved side (safe side) of the installation. The Fixture secures to the Base
installation system and make it better. Shoe and glass with adjustable clamps. Alignment is achieved by
Described below are some of the improvements. Not all of our turning the adjustment bolt in or out until plumb is achieved. After
newly designed products are required to complete the job. For that, the Fixture holds the glass in place until the expanding cement
example, using a level and shims between the glass and Base cures. Then the fixture can be easily removed by sliding it up the
Shoe will still help make the glass plumb. However, using our Cat. gap between the glass panels.
No. GRAT1 Clamp and Alignment Fixture in conjunction with a laser The use of each new tool or accessory is completely described
will reduce your installation time. The Clamp and Alignment Fixture in our Wet Glaze Installation Instructions. Below is a selection of
is ideal for mezzanine installations where reaching over the rail to GRS Wet Glaze System components which can be ordered
place shims between the glass and Base Shoe is unsafe. separately. You can also view these at crlaurence.com.
CRL Wet Glaze Installation Kit. See page R521. Spacing, Centering, and Sealing Accessories. Expanding Cement Delivery and
See pages R524 to R525. Mixing Accessories. See pages R522 to R523.

CRL GRS WET GLAZE SYSTEM Contact CRL Tech Sales for complete planning
The CRL 'All-Glass' Railing System 4 Cladding and Finishing Off the Base Shoe
Installed Using the Wet Glaze Method
1 Code Considerations
Model Code Regulations usually require 50 lb./ft. uniform loading
or a 200 pound (90 kg) concentrated load to the hand rail at the
distance of 42" (1066 mm) above the floor. In our test, concentrated
loads of 400 to 800 pounds (181 to 363 kg) were applied at approximately
42" (1066 mm) above the floor surface. Test results and engineering
calculations show that the strength of our Base Shoe Extrusion and
selected fasteners that were tested would exceed the above-mentioned
Metal Cladding is available in a variety of architectural
Model Code loading criteria by a factor of four.
finishes and styles. It is attached to the Base Shoe using Very
All Base Shoe attachment substrates should be tested for compliance Hi-Bond Tape and Silicone Sealant (see page R536). Rubber
by a structural engineer because steel, concrete, or other attachment Gasket material dresses off the space between the glass and
substrates can change from job to job. Even previously approved Base Shoe, giving a clean, uniform appearance.
attachment designs should have the job site substrates tested for
compliance. Codes, ordinances, and project specifications should also
be checked by your local regulatory authorities for compliance before
starting the job. It is the responsibility of the building owner, architect,
and installation sub-contractor to comply with applicable building codes 5 Attaching the Top Cap Rail
and regulations.
CRL’s testing was performed to assure the user that our Base Shoe and
fasteners were tested and passed the code regulations. The attachment
steel plates, welds, concrete make-up, and strength are the responsibility
of the user as these conditions are beyond our control.
2 Typical Wet Glaze Base Shoe Attachments
Base Shoe attachment is extremely critical to the structural integrity

of a successful installation. The mounting methods listed below, then
Secure the Rigid Vinyl Protective Insert in Cap Rail using our
shown in detail on pages R526 and R527, are methods of attachment
95CBL Silicone (see page R536). Apply a bead of 95CBL
previously tested. Alternative methods of attachment may be possible,
Silicone on the top edge of the glass and shims if necessary,
but should be determined after consultation with an engineer.
and then slip the Cap Rail with Insert down over the glass.
1. Base Shoe Attachment to Concrete (see page R526). Apply even pressure until Cap Rail is firmly seated. Shim as
2. Base Shoe Attachment to Weld Blocks/Welded to a Steel Substrate (see page R526). required and caulk on both sides of glass at pocket bottom for
3. Base Shoe Attachment to Steel Substrate/Fascia Mount or Angle Mount a clean, finished look.
(see page R527).
4. Base Shoe Attachment when Embedded in Concrete (see page R527).
5. Base Shoe Attachment to Embedded Steel Strip (see page R527).
3 Securing the Glass in the Base Shoe 6 Attaching the Hand Rail
Place Setting and Centering Blocks at quarter points on the The Railing can be attached to the glass by using Hand
bottom edge of glass panel and insert into Base Shoe. Shim for Rail Brackets designed for glass attachment. These
height as required. Shim to plumb glass as required or use the CRL Brackets required the glass having a 3/4" (19 mm) hole
Clamp and Alignment Fixture (see page R521). Mix Expanding drilled in it before tempering.
Cement and apply to area between the glass and Base Shoe using
CRL Pouring Ramp, Pump, or Dispenser Bottle (see page R522).
COMPLETE INSTALLATION, CLEANING, AND REFINISHING INSTRUCTIONS ARE AVAILABLE UPON REQUEST
You may also view them on our web site at crlaurence.com

CRL Wet Glaze Alignment Five Easy Steps to Accurate Alignment

and Securing System
• Aligns Hand Railing Glass Panels

to Within 1/32" (.8 mm) of Plumb 1. Install glass panels with 2. Secure the glass panels with
Setting/Centering Blocks and the CRL Clamp and Alignment
• Secures the Glass in Place While Sealing Pads between them Fixture.
to control the pour.
the Expansion Cement Sets Up
The CRL Wet Glaze Alignment and Securing
System not only aligns the glass panels, but holds
the glass in position while the expansion
cement sets. Additional Clamp and Alignment
Fixtures allow you to do multiple panel pours. 3. Attach the Laser with Bracket 4. Turn adjustment knob on the 5. Pour in Expansion Cement to
to the glass panel and insert CRL Clamp and Alignment 3/8" (9.5 mm) below the top.
the Plumb Indicator Bracket. Fixture until the Laser Beam Allow adequate time for it
splits the plumb indicator line. to set.
CRL Wet Glaze CRL Clamp and

Installation Kit Alignment Fixture
• Secures and Aligns
the Glass
KIT CONTAINS: • Plumb Within 1/32" (.8 mm)
CRL Clamp and Alignment
Fixture, Laser Bracket, When Used With Laser
Plumb Indicator Bracket,
and Laser of your choice. • Retains Position Until
Individual parts are also Cement Sets
available. See additional
offerings on this page. The CRL Clamp and Alignment Fixture is a dual purpose tool.
It not only aligns the glass, but can also be used to secure the
CAT. NO. DESCRIPTION cladding and hold it in place. A simple turn of the knob moves the
glass in or out to achieve a plumb position.
R0B0VWK Complete Installation Kit with R0B0V Laser
PLS5WK Complete Installation Kit with PLS5 Laser CAT. NO. DESCRIPTION
PLS3WK Complete Installation Kit with PLS3 Laser GRAT1 Clamp and Alignment Fixture
CRL Laser Bracket and CRL Lasers

Plumb Indicator Bracket
By using the appropriate
Laser Bracket and Plumb
Indicator Bracket to match
your laser, the glass can be
plumbed to within 1/32"
(.8 mm). CAT. NO. CAT. NO.
MANUFACTURED IN THE USA
BY C.R. LAURENCE R0B0VP1B R0B0VLB CAT. NO. R0B0V CAT. NO. PLS5 CAT. NO. PLS3
An ISO9001:2000 Certified Company
Any of the above CRL Lasers, used in conjunction with the

CAT. NO. DESCRIPTION appropriate Laser Bracket and Plumb Indicator Bracket, will
R0B0VLB Laser Bracket for R0B0V plumb the Base Shoe so that the glass will be plumb to within
PLS5LB Laser Bracket for PLS5 1/32" (.8 mm). For more details on these tools and accessories,
PLS3LB Laser Bracket for PLS3 visit the CRL web site at crlaurence.com.
CAT. NO. DESCRIPTION CAT. NO. DESCRIPTION
R0B0VP1B Plumb Indicator Bracket for R0B0V R0B0V Robo Vector 5-Way Laser Tool
PLS5P1B Plumb Indicator Bracket for PLS5 PLS5 Deluxe 5-Way Laser Tool
PLS3P1B Plumb Indicator Bracket for PLS3 PLS3 Standard 3-Way Laser Tool

CRL Wet Glaze Pump and Accessories

• Portable, Lightweight, Compact Delivery
System for Expansion Cement
• Dramatically Increases Speed of Application
• On/Off Control at Point of Delivery
• Quick and Easy Hose Replacement
When CRL decided to enter the Glass Rail market, we went at
it in typical CRL fashion and asked the question "How can we
improve on the antiquated processes and equipment currently
being used to benefit our customers"? So when it came time to CAT. NO. GRP1
Pump Kit Includes: One Pump with Hoses, One Nozzle, One Momentary ON/OFF Switch,
look at the way that the expansion cement was being delivered
Two 5 Gallon Buckets, Two Measuring Pitchers, One Plastic Scoop, One Mixing Spoon,
to the Base Shoe, we knew we had to find a better way. We did One GFC1 15A Ground Fault Interrupt Device, and One GRP2 Replacement Hose Kit.
just that by developing our Wet Glaze Pump and Accessories. NOTE: Clamp and Alignment Fixture and Laser not included. See page R521 for
The Wet Glaze Pump has been designed to reduce the labor information. Minimum order is one each.
associated with the application of expansion cement to Hand Rail
Base Shoe, and to improve the quality, efficiency, and CAT. NO. GRP2
effectiveness of the final assembly of the Base Shoe and glass. Replacement Hose Kit Includes: Hoses, One Nozzle, and Clamps (No ON/OFF Switch).
Minimum order is one each.
The Wet Glaze Pump not only increases speed of application
dramatically, it also offers superior control over the flow rate and Details on Kit components are available from CRL Technical Sales or the CRL web site
delivery location than that of manual applicators. at crlaurence.com.
This unique delivery system utilizes a pair of rollers fixed to a rotating disk
that squeezes the cement through flexible tubing. Since the tubing is the only
thing to come in contact with the cement, there are no seals to leak, giving you
a virtually maintenance free pump.
Simply mix your cement in the mixing bucket, insert the end of the Inlet Hose
into the mixture, and depress the handy ON/OFF Switch located on the Delivery
Nozzle. The Pump will immediately start to move the cement through the hose.
Purge any excess water from the hose and release the ON/OFF Switch. You
are now ready to start pumping cement into the Base Shoe at a rate of 11 feet
(3.3 m) per minute.
CRL Pouring Ramp for Base CRL Dispensing Bottle

Shoe Applications Using for Expansion Cement
Expansion Cement
• Neat and Effective Manual • Ideal for Small,
Delivery of Expansion Hard to Pour Areas
Cement • 32 Ounce Capacity
• Shields Gasket Retention
Groove in Base Shoe This is a durable plastic
squeeze bottle that ideally
• Wide Delivery Area applies the expansion cement to
The CRL Pouring Ramp small, hard to pour areas. This
provides a wide delivery area for clean and neat Dispensing Bottle
mess-free pouring of cement into saves you clean up time on the
Base Shoe. It shields the gasket job, and makes spot pours easy.
retention groove area in the Base Bottle capacity is 32 fluid
Shoe, thereby eliminating further ounces (946 ml).
clean up. You will find the
Pouring Ramp to be a neat and
effective method to manually MANUFACTURED IN THE USA
BY C.R. LAURENCE
deliver the expansion cement An ISO9001:2000 Certified Company
used in our Wet Glaze System.

GRP35 Cement Pouring Ramp GRP36 Cement Dispensing Bottle

CRL Kwixset and Rockite ® ®
Expanding Cements
• Kwixset® for Exterior Applications
• Rockite® for Interior Applications
• Recommended on All Wet Glaze HRS
Installations
• Great for Setting Glass in Heavy Base Shoe
• Fast Setting, They Will Not Shrink
or Crack When Used as Directed
CRL Kwixset® and Rockite® are gray, hydraulic type

cements that expand as they set, and are specially
formulated to produce unexcelled strength and bonding For Exterior Applications For Interior Applications Only
qualities. When mixed with water they pour into place
smoothly. Both set within 15 to 20 minutes, and when fully
cured develop compression strengths in excess of 8000 KWIXSET® CEMENT ROCKITE® CEMENT
pounds per square inch. CAT. NO. WEIGHT CAT. NO. WEIGHT
Kwixset® is not affected by standing water, making it the KWX25 25 Pounds (11.3 kg) R0CK01 1 Pound (.453 kg)
right cement for exterior use, while the more economical KWX50 50 Pounds (22.7 kg) R0CK05 5 Pounds (2.27 kg)
Rockite® is great for any interior application. Use either Minimum order: 1 each. NOTE: Kwixset® can be used in R0CK10 10 Pounds (4.54 kg)
temperatures as low as 40°F (4°C).
product to set railings, posts, and other fixtures because R0CK50 50 Pounds (22.7 kg)
they will not shrink, crack or dry out. Minimum order: 1 each. NOTE: Rockite® can be used in
temperatures as low as 25°F (-4°C).
CRL Kwixset and Rockite Expanding Cements ® ®
BASE SHOE CEMENT WATER EXAMPLE #1: For 8 feet (2.4 m) of Base
RUNNING FEET POUNDS VOLUME OZ. MILLILITERS PINTS FLUID OZ. MILLILITERS Shoe you need 10 pounds of cement
and 48 ounces of water for the correct
4 (1.2 m) 5 (2.27 kg) 67.6 2000 1-1/2 24 709 mix.
8 (2.4 m) 10 (4.54 kg) 135.2 4000 3 48 1418
EXAMPLE #2: For 12 feet (3.6 m) of Base
12 (3.6 m) 15 (6.80 kg) 202.8 6000 4-1/2 72 2127 Shoe you need 6000 milliliters of cement
These mixing proportions are guidelines based on what we feel is the best way to mix and apply cement, and we make no guarantee or warranty to its performance. and 2127 milliliters of water for the
We suggest you make a sample batch for testing purposes to determine the exact formula that is right for your application before beginning any job. correct mix.
CRL Cement Mixing Kit and Mixing Accessories

• Everything Needed to Accurately Measure and
Mix Expanding Cement
• Buy the Kit or Order Items Individually
We have developed a kit with a combination of accessories that makes it

easier to get the proper mixture of water and expanding cement. Simply mix
expanding cement with water. The handy 3.5 gallon (13.25 liter) Pouring Pail
has a spout and handle for easy delivery of the mixture. The Plastic Scoop
and Mixing Spoon complete the kit. Use our Cat. No. GRP35 Cement Pouring
Ramp (see page R522) for a neat and effective method of directing the
mixture just where you want it.

GRP30 Cement Mixing Kit with one of each: 1000cc Pitcher (Water); 3000cc Pitcher
(Dry Cement), 3.5 Gallon Pouring Pail, Plastic Scoop, Mixing Spoon
GRP31 Set of Mixing Pitchers: 1000cc (Water), 3000cc (Dry Cement)
GRP32 3.5 Gallon Pouring Pail
GRP33 Plastic Scoop
GRP34 Mixing Spoon
Minimum order: 1 each.

CRL Setting and Centering Blocks

for 1/2", 5/8", and 3/4" Glass
• Easily Center Glass Panels in Hand Rail Base Shoe
• Supports Glass Panels for Expansion Cement Installations
• Available in 4" (102 mm) Cut Pieces or 25' (7.6 m) Bulk Rolls
CRL Setting and Centering Blocks are available for use with CRL B5S, B7S, B5T,
and B5L Series Base Shoe. Stocked in 25' (7.6 m) rolls that can be cut to any length,
CRL recommends two 4" (102 mm) pieces located at quarter points along the bottom
edge of each glass panel. You can also get them pre-cut in 4" (102 mm) pieces.
They are made of black EPDM rubber for durability and longevity.
For 1/2" (12 mm) For 5/8" (16 mm) For 3/4" (19 mm)
Glass Glass Glass
7/8" 7/8" 7/8"

(22.2 mm) (22.2 mm) (22.2 mm)
1" 1-1/4" 1-1/4"

(25.4 mm) (31.7 mm) (31.7 mm)
CAT. NO. GR5UB CAT. NO. GR6UB CAT. NO. GR7UB

CAT. NO. GLASS THICKNESS BASE SHOE SERIES PACKAGING
GR5UB25 1/2" (12 mm) B5S, B5T, B5L 25' (7.6 m) per Roll
GR6UB25 5/8" (16 mm) B7S 25' (7.6 m) per Roll
GR7UB25 3/4" (19 mm) B7S 25' (7.6 m) per Roll
GR5UB4 1/2" (12 mm) B5S, B5T, B5L *20 each 4" (102 mm) per Pack
GR6UB4 5/8" (16 mm) B7S *20 each 4" (102 mm) per Pack
GR7UB4 3/4" (19 mm) B7S *20 each 4" (102 mm) per Pack
Minimum order: 1 roll. *Minimum order for 4" (102 mm) pieces is 20 each. Must be ordered in increments of 20.
CRL Top Rubber Gasket CRL Vinyl Roller Tool for

for Base Shoe Top Rubber Gasket
• Quick and Easy EPDM Rubber Gasket • Solid Aluminum Handle With Hard Coat
for Hand Rail Base Shoe Anodized Finish
• Locks in Place When Used With CRL • Easy-Rolling Ball Bearing Wheel
Base Shoe
CRL Top Rubber Gasket finishes
off the top of the Base Shoe pocket
after glass has been set. It also CAT. NO. VR04
works great as a seal when used in
conjunction with CRL Base Shoe
when doing slant pours.
CAT. NO. VR17
This gasket easily rolls in with the
CRL Vinyl Roller Tool (at right). An These CRL Vinyl Roller Tools are
alternative method of dressing off ideal for inserting Top Rubber Gasket
and finishing the top pocket is to use into Base Shoe. Knurled diamond
CRL Closed Cell Backer Rod and grip for sure handling, and a smooth
CRL 95CBL Black Silicone Sealant rolling ball bearing wheel. Now
(see page R536). For more available in standard 11" (279 mm)
information on these products, and deluxe 17" (432 mm) lengths.
go to crlaurence.com.
CAT. NO. GLASS THICKNESS ROLL LENGTH CAT. NO. DESCRIPTION

BSG100 1/2" or 3/4" (12 or 19 mm) 100' (30.5 m) VR04 11" (279 mm) Vinyl Roller Tool
BSG500 1/2" or 3/4" (12 or 19 mm) 500' (152.4 m) VR17 17" (432 mm) Vinyl Roller Tool
Minimum order: 1 roll. Cannot be used with 5/8" (16 mm) thick glass. Minimum order: 1 each.

CRL High Density Foam

Spacing and Sealing Pads
• Die Cut Foam Pad With Adhesive on One Side
• Fast and Accurate Spacing and Sealing of Glass Panels
• Can Be Adhered Together to Increase the Gap Between
the Glass Panels in 1/4" (6 mm) Increments
These High Density Foam Pads not only act as spacers between increased in 1/4" (6 mm) increments to meet your needs. Use with
panels of glass, they also create a seal at the end of selected panels, Rigid Rubber Spacing Blocks on slant pours to prevent glass
acting as a dam for your desired pour area. They are easily installed movement during installation. NOTE: You must cut 5/8" (16 mm)
and perfectly aligned every time using the CRL Rubber Spacing Block off of the length of the Spacing and Sealing Pad when used with
and Sealing Pad Installation Tool (see below). The adhesive on one B5L Series Low Profile Base Shoe.
side allows the pads to be adhered together so spacing can be
CAT. NO. FITS BASE SHOE SERIES GLASS THICKNESS PAD WIDTH PAD THICKNESS PAD LENGTH QTY/PKG
GR5NSB B5S, B5T, and B5L 1/2" (12 mm) 1-1/16" (27 mm) 1/4" (6.3 mm) 3-7/16" (87 mm) 20
GR7NSB B7S 3/4" (19 mm) 1-5/16" (33 mm) 1/4" (6.3 mm) 3-7/16" (87 mm) 20
Minimum order: 20 each. Pads must be ordered in increments of 20.
CRL Rigid Rubber Spacing

Blocks With Adhesive
• Adhesive Back Holds Spacing
Block in Place
• Maintains Even Spacing on
Slant Installations
CRL Rigid Rubber Spacing Blocks With Adhesive provide even spacing between glass panels.
They are always necessary on slant stair installations to prevent the glass panels from sliding
down. They are easily installed and perfectly aligned every time using the CRL Rubber Spacing
Block Installation Tool (see below). Adhesive back holds the Spacing Blocks in position.
NOTE: You must cut 5/8" (16 mm) off of the length of the Spacing Block when used with B5L
Series Low Profile Base Shoe.
CAT. NO. FITS BASE SHOE SERIES WIDTH THICKNESS LENGTH QTY/PKG
GR5ASB B5S, B5T, and B5L 1/2" (12 mm) 1/4" (6.3 mm) 3-5/16" (84 mm) 100
GR7ASB B7S 3/4" (19 mm) 1/4" (6.3 mm) 3-5/16" (84 mm) 100
Minimum order: 100 each. Blocks must be ordered in increments of 100.
CRL Rubber Spacing Block and

Sealing Pad Installation Tool
• Makes Positioning of Spacing Blocks
or Sealing Pads Fast and Easy
Simply push the CRL Rubber Spacing Block, with the adhesive
side out, into the notch at the end of the Installation Tool, and then
remove the release paper. Slip the Tool into Base Shoe pocket and
slide it toward the edge of the glass panel. When contact is made
push firmly, and then slide the Tool back. The Spacing Block is now
in the proper location. To install Sealing Pads, place them in the Base
Shoe pocket, and then push into place with the Tool.

RSB1T Rubber Spacing Block and Sealing Pad Installation Tool

CRL GRS BASE SHOE GLAZING SYSTEMS Contact CRL Tech Sales for complete planning
Typical Base Shoe Attachments

Attachment Concerns and Information
Our Glass Railing Base Shoes and Fasteners are tested to meet
model code regulations. This testing only covers the structural
integrity of the Base Shoes and the attachment strength of the
Fasteners. The structural integrity of the attachment substrate,
concrete or steel, is the responsibility of the architect, structural
engineer, and contractor.
It is important to note that every project should be considered
unique, and individual testing and engineering should be performed.
Therefore, tight specifications, and a set of structurally engineered
plans approved by the local building department, along with job site
testing, are a must to cover the life and safety issues involved in
hand rail projects.
Illustrated here are five typically approved types of installation
attachments commonly used in the industry today. Your project may
vary. PDF drawing files are available for each of the five different
attachment scenarios, along with model code regulations and testing.
Data can be viewed on our web site at crlaurence.com.
1 Base Shoe Attachment to Concrete

Works With B5S, B5T, B5L, and B7S
Series Base Shoe
A common installation is to attach the
Base Shoe directly to the concrete. We
searched for a fastener that would meet
the model code regulations. We selected
Cat. No. WBA38X4 Wedge-Bolt Anchors
with Cat. No. WBAW38 Wedge-Bolt
Washers (see page R539). When the
concrete is drilled with ANSI Specification
Drill Bits, and the anchor is secured in
minimum 4000 psi concrete, sufficient
strength was achieved to pass testing.
2 Base Shoe Attachment to Weld Blocks/Welded to a Steel Substrate

Works With B5S, B5T, B5L, and B7S
Series Base Shoe
In many instances, installing Base
Shoes with Weld Blocks attached and
ready for welding is easier than trying
to match Base Shoe holes to
substrate holes. If the Base Shoe is
being attached to a structurally secure
steel substrate, all that is required is
Steel plate
welding the two together, with no by others
drilling or tapping of holes. Another
advantage is that the Base Shoe can
be positioned and aligned to job site
conditions, and then welded.

CRL GRS BASE SHOE GLAZING SYSTEMS For Pricing on CRL Products, Call Toll Free
Typical Base Shoe Attachments

3 Base Shoe Attachment to Steel Substrate/Fascia Mount or Angle Mount
Works With B5S, B5L, and B7S Series Base Shoe
If you are attaching a Base Shoe to
a channel or angle from the side, this
is called a Fascia Mount. Base Shoe
should be attached to steel substrate
prior to concrete being poured. Otherwise,
drilling and tapping of steel may be difficult,
if not impossible. Use of Weld Blocks may
be a possible solution. CRL can fabricate
the Base Shoe with side mount attachment
holes per your engineer’s instructions.
An alternative is to fasten an angle to the
fascia and mount the Base Shoe using the Steel plate
regular bottom mount method. Steel should by others
be drilled to match hole locations in Base
Shoe. Allowable fabrication tolerances may
Alternative Method
affect 12" (305 mm) centers.
4 Base Shoe Attachment When Embedded in Concrete

Works With B5T Series Base Shoe
If planning and time permit, a poured
in place Base Shoe is often preferred
when an 'all-glass' look is desired. This
eliminates any Base Shoe showing, and
gives the impression that the glass comes
directly out of the floor. A Tapered Base
Shoe was developed for this application.
When poured in place it is locked in by
Steel plate
concrete. Mechanically fastening the shoe by others
to the substrate is still recommended during
installation. There are many different ways
to set the Base Shoe prior to pouring
concrete. For more information or questions
regarding the different mounting options
Alternative Method
contact CRL Technical Sales.
5 Base Shoe Attachment to Embedded Steel Strip

Works With B5S, B5T, B5L, and B7S Series Base Shoe
This attachment is often used in
multi-story buildings with concrete floors.
A 4" (101.6 mm) wide x 1/2" (12.7 mm)
thick steel strip, drilled and tapped for
1/2"-13 S.S. Socket Head Cap Screws
on 12" (305 mm) centers (plugged or
taped to prevent concrete penetration), is
installed flush with the top of the concrete
floor. To meet code requirements 3/8" x
2-1/2" (9.5 x 63.5 mm) Nelson Studs are
welded to the underside of the steel strip Steel plate
on 18" (457 mm) centers. For installation, by others
remove the tape or plug from tapped holes
and secure the Base Shoe with approved
fasteners. Steel should be drilled to match
hole locations in Base Shoe. Allowable
fabrication tolerances may affect 12"
(305 mm) centers.

CRL GRS BASE SHOE FOR GLASS RAILING SYSTEMS Contact CRL Tech Sales for complete planning
CRL B5S Series Standard Square Base Shoe

• For 1/2" to 5/8" (12 to 16 mm) Glass
• Typically Used as the Base Channel for Glass Railing Systems or Windscreens
• Drilled and Counter Bored, or We Will Custom Drill to Your Specifications
• Custom Cutting and Mitering Service Available
1" 2-1/2"
(25.4 mm) (63.5 mm)
4-1/8" 4-1/8"
(104.8 mm) (104.8 mm) 7/8"
(22.2 mm)
1/2" (12.7 mm) 13/16"

(20.6 mm)
2-1/2" (63.5 mm) 9/16" (14.3 mm)
Undrilled Hole Pattern "D"

12" (305 mm) C.T.C.
1/4" (6.3 mm) 2-1/16"

(52.3 mm)
7/8" (22.2 mm)
9/16" (14.3 mm) 29/32" Gasket Retention Groove
(22.9 mm)
Clearance
• 6063 Alloy Secures the Top Rubber
Gasket in the Base Shoe
• T52 Temper
1/2" (12.7 mm)
TAPER-LOC™ DRY GLAZE SYSTEM WET GLAZE SYSTEM
Hole Pattern "F"
12" (305 mm) C.T.C.
The CRL B5S Series Standard Square Base Shoe is used as the base
channel for glass railing systems. It can be clad in five choices of architectural
finishes (see next page). The most critical component in a railing system is
the proper attachment of the Base Shoe to the substrate. CRL has
engineered and tested a variety of attachment methods, and has developed an
acceptable combination of drilling patterns and fasteners. The five tested
methods of attachment can be found on pages R526 to R527, and associated For Use with 1/2" (12 mm) For Use with 1/2" (12 mm)
fasteners are shown on pages R538 to R539. A printed brochure with or 5/8" (16 mm) Glass or 5/8" (16 mm) Glass
Instructions, Installation Hints, Cleaning, and Refinishing techniques is available. For Use with For Use with 1/2" (12 mm)
You may also view it at crlaurence.com. 1/2" (12 mm) Glass or 5/8" (16 mm) Glass
B5S Series Standard Square Base Shoe

For Test Results and
CAPACITY: Drilling Recommendations,
1/2" (12 mm) Thick Glass when using TAPER-LOC™ Dry Glaze System; See Pages R539 and R541.
1/2" (12 mm) or 5/8" (16 mm) Thick Glass when using Wet Glaze System
CAT. NO. STOCK LENGTH* HOLE SIZE COUNTER BORE X DEPTH CENTER-TO-CENTER WEIGHT
B5S10D** 120" (3.05 m) 9/16" (14.3 mm) 7/8" (22.2 mm) x 1/2" (12.7 mm) 12" (305 mm) 84 pounds (38 kg)
B5S20D** 240" (6.10 m) 9/16" (14.3 mm) 7/8" (22.2 mm) x 1/2" (12.7 mm) 12" (305 mm) 167 pounds (76 kg)
B5S10F 120" (3.05 m) 9/16" (14.3 mm) 7/8" (22.2 mm) x 1/2" (12.7 mm) 12" (305 mm) 84 pounds (38 kg)
B5S10∆ 120" (3.05 m) - Extrusion Only (Without Holes) - 84 pounds (38 kg)
B5S20∆ 240" (6.10 m) - Extrusion Only (Without Holes) - 167 pounds (76 kg)
** Our Best Sellers are Pre-Drilled at CRL's Manufacturing Facility. * Stock lengths have a tolerance of plus or minus 3/4" (19 mm). Minimum order: 1 each. All Base Shoe can be combined for quantity pricing. Must ship common carrier.
NOTE: 120" (3.05 m) and 240" (6.10 m) Extrusion Only (without holes) SHIPPING NOTE: Due to the difficulty in packaging and handling 240" (6.10 m) stock
cannot be used for the TAPER-LOC™ Dry Glaze System unless the Base lengths, it is suggested that you Will Call these at any of our distribution centers. If
Shoe is fabricated to the above tested and approved hole and counter bore requiring shipment, all packaging and handling concerns must be agreed to by CRL
pattern. The TAPER-LOC™ Dry Glaze System requires that the attachment and the customer prior to shipping. All shipping arrangements will be documented
holes be counter bored so that no part of the fastener protrudes above the on your quotation for your signed approval.
base of the channel opening.

CRL GRS BASE SHOE FOR GLASS RAILING SYSTEMS For Pricing on CRL Products, Call Toll Free
CRL Cladding for B5S Series Standard Square Base Shoe MANUFACTURED IN THE USA
BY C.R. LAURENCE
CRL Straight Cladding for B5S Series CRL 12" Mitered Corner Cladding for B5S
Standard Square Base Shoe Series Standard Square Base Shoe
• Adhere With • 90 Degree and 135
Cladding Tape Degree Corner Sets
or Silicone • Adhere With
Sealant Cladding Tape
• Available in Six or Silicone Sealant
Architectural • Available in Six
Finishes Architectural
• Custom Cutting Finishes
and Mitering CRL Mitered Corner Cladding allows the user to match any of
Service Available six architectural finishes offered in Cap Railing. Each leg is 12"
(305 mm) in length, and can be secured to the Base Shoe using
Cladding Tape or Silicone Sealant. See page R536 for CRL Cladding
CRL Cladding allows the user to match any of six architectural Tape, CRL Silicone Sealant, and attachment instructions. Comes four
finishes offered in Cap Railing. It can be secured to the Base Shoe pieces per set.
using Cladding Tape or Silicone Sealant. See page R536 for CRL CAT. NO. GA. / THK. FINISH DESCRIPTION
Cladding Tape, CRL Silicone Sealant, and attachment instructions. B5S90BS 18 / .050" Brushed Stainless 90 Degree Corner
NOTE: Sold by individual pieces. Base Shoe requires two pieces B5S90PS 18 / .050" Polished Stainless 90 Degree Corner
for coverage on both sides. B5S90PB 18 / .045 Polished Brass 90 Degree Corner
B5S90SB 18 / .045"" Satin Brass 90 Degree Corner
CAT. NO. GA. / THK. LENGTH FINISH B5S90SA 18 / .050" Satin Anodized 90 Degree Corner
BSCBS10 18 / .050" 120" (3.05 m) Brushed Stainless B5S90DU 18 / .050" Dark Bronze Anodized 90 Degree Corner
BSCPS10 18 / .050" 120" (3.05 m) Polished Stainless B5S135BS 18 / .050" Brushed Stainless 135 Degree Corner
BSCPB10 18 / .045" 120" (3.05 m) Polished Brass B5S135PS 18 / .050" Polished Stainless 135 Degree Corner
BSCSB10 18 / .045" 120" (3.05 m) Satin Brass B5S135PB 18 / .045" Polished Brass 135 Degree Corner
BSCSA10 18 / .050" 120" (3.05 m) Satin Anodized B5S135SB 18 / .045" Satin Brass 135 Degree Corner
BSCDU10 18 / .050" 120" (3.05 m) Dark Bronze Anodized B5S135SA 18 / .050" Satin Anodized 135 Degree Corner
Minimum order: 1 each. All finishes can be combined for quantity pricing. Standard stock lengths are 120" (3.05 m). B5S135DU 18 / .050" Dark Bronze Anodized 135 Degree Corner
Custom lengths up to 168" (4.26 m) are available on special order. Must ship common carrier.
Minimum order: 1 set. All finishes can be combined for quantity pricing.
CRL End Caps for B5S Series CRL 12" Welded End Cladding for B5S
Standard Square Base Shoe Series Standard Square Base Shoe
• Adhere With • Adhere With
Cladding Tape or Cladding Tape
Silicone Sealant and Silicone
• Available in Six Sealant
Architectural • Available in Four
Finishes
CRL End Caps allow the user to match any of six architectural
finishes offered in Cap Railing. They can be secured to the Base CRL Welded End Cladding allows the user to match any of four
Shoe using Cladding Tape or Silicone Sealant. See page R536 architectural finishes offered in Cap Railing. It is 12" (305 mm) in
for CRL Cladding Tape, CRL Silicone Sealant, and attachment length, and can be secured to the Base Shoe using Cladding Tape
instructions. Comes one per package. and/or Silicone Sealant. See page R536 for CRL Cladding Tape,
CRL Silicone Sealant, and attachment instructions. Comes one
CAT. NO. GA. / THK. FINISH QTY/PKG
per package.
B5SECBS 18 / .050" Brushed Stainless 1
B5SECPS
B5SECPB
B5SECSB
Image 18 / .050"
18 / .045"
18 / .045"
Polished Stainless
Polished Brass
Satin Brass
1
1
1
CAT. NO.
B5SWCBS
B5SWCPS
FINISH
Brushed Stainless
Polished Stainless
QTY/PKG
1
1
B5SECSA 18 / .050" Satin Anodized 1 B5SWCPB Polished Brass 1
B5SECDU 18 / .050" Dark Bronze Anodized 1 B5SWCSB Satin Brass 1
Minimum order: 1 each. All finishes can be combined for quantity pricing. Minimum order: 1 each. All finishes can be combined for quantity pricing.

CRL B7S Series Heavy-Duty Square Base Shoe

• For 3/4" (19 mm) Glass
• Typically Used as the Base Channel for Glass Railing Systems in Arenas
• Drilled and Counter Bored, or We Will Custom Drill to Your Specifications
1-1/4" 2-3/4"
(31.8 mm) (69.9 mm)
4-1/8" 4-1/8"
(104.8 mm) (104.8 mm) 7/8"
(22.2 mm)
1/2" (12.7 mm) 13/16"

(20.6 mm)
2-3/4" 9/16" (14.3 mm)

(69.9 mm)
Hole Pattern "D"
Undrilled 12" (305 mm) C.T.C.
1/4" (6.3 mm) 2-1/16" Gasket Retention Groove Secures the

(52.3 mm) Top Rubber Gasket in the Base Shoe
7/8" (22.2 mm)
29/32" • 6063 Alloy
9/16" (14.3 mm) (22.9 mm)
Clearance • T52 Temper
TAPER-LOC™ DRY GLAZE SYSTEM WET GLAZE SYSTEM
1/2" (12.7 mm)
Hole Pattern "F"

12" (305 mm) C.T.C.
The CRL B7S Series Heavy-Duty Square Base Shoe is used as the base
channel for glass railing systems. It can be clad in five choices of architectural
finishes (see next page). The most critical component in a railing system
is the proper attachment of the Base Shoe to the substrate. CRL has
engineered and tested a variety of attachment methods, and has developed
For Use with 1/2" (12 mm) For Use with 1/2" (12 mm)
an acceptable combination of drilling patterns and fasteners. The five tested or 5/8" (16 mm) Glass or 5/8" (16 mm) Glass
methods of attachment can be found on pages R526 to R527, and associated
fasteners are shown on pages R538 to R539. A printed brochure with For Use with For Use with
3/4" (19 mm) Glass 3/4" (19 mm) Glass
Instructions, Installation Hints, Cleaning, and Refinishing techniques is
available. You may also view it at crlaurence.com.
B7S Series Heavy-Duty Square Base Shoe For Test Results and
Drilling Recommendations,
CAPACITY:
3/4" (19 mm) Thick Glass when using TAPER-LOC™ Dry Glaze System or Wet Glaze System See Pages R539 and R541.
B7S10D 120" (3.05 m) 9/16" (14.3 mm) 7/8" (22.2 mm) x 1/2" (12.7 mm) 12" (305 mm) 86 pounds (38 kg)
B7S20D 240" (6.10 m) 9/16" (14.3 mm) 7/8" (22.2 mm) x 1/2" (12.7 mm) 12" (305 mm) 172 pounds (78 kg)
B7S10 120" (3.05 m) - ∆Extrusion Only (Without Holes) - 86 pounds (38 kg)
B7S20 240" (6.10 m) - ∆Extrusion Only (Without Holes) - 172 pounds (78 kg)
* Stock lengths have a tolerance of plus or minus 3/4" (19 mm). Minimum order: 1 each. All Base Shoe can be combined for quantity pricing. Must ship common carrier.

CRL Cladding for B7S Series Heavy-Duty Square Base Shoe MANUFACTURED IN THE USA
BY C.R. LAURENCE
CRL Straight Cladding for B7S Series CRL 12" Mitered Corner Cladding for B7S
Heavy-Duty Square Base Shoe Series Heavy-Duty Square Base Shoe
CRL Cladding allows the user to match any of six architectural Tape, CRL Silicone Sealant, and attachment instructions. Comes
finishes offered in Cap Railing. It can be secured to the Base Shoe four pieces per set.
Cladding Tape, CRL Silicone Sealant, and attachment instructions. B7S90BS 18 / .050" Brushed Stainless 90 Degree Corner
NOTE: Sold by individual pieces. Base Shoe requires two pieces B7S90PS 18 / .050" Polished Stainless 90 Degree Corner
for coverage on both sides. B7S90PB 18 / .045" Polished Brass 90 Degree Corner
B7S90SB 18 / .045" Satin Brass 90 Degree Corner
CAT. NO. GA. / THK. LENGTH FINISH B7S90SA 18 / .050" Satin Anodized 90 Degree Corner
BSCBS10 18 / .050" 120" (3.05 m) Brushed Stainless B7S90DU 18 / .050" Dark Bronze Anodized 90 Degree Corner
BSCPS10 18 / .050" 120" (3.05 m) Polished Stainless B7S135BS 18 / .050" Brushed Stainless 135 Degree Corner
BSCPB10 18 / .045" 120" (3.05 m) Polished Brass B7S135PS 18 / .050" Polished Stainless 135 Degree Corner
BSCSB10 18 / .045" 120" (3.05 m) Satin Brass B7S135PB 18 / .045" Polished Brass 135 Degree Corner
BSCSA10 18 / .050" 120" (3.05 m) Satin Anodized B7S135SB 18 / .045" Satin Brass 135 Degree Corner
BSCDU10 18 / .050" 120" (3.05 m) Dark Bronze Anodized B7S135SA 18 / .050" Satin Anodized 135 Degree Corner
Minimum order: 1 each. All finishes can be combined for quantity pricing. Standard stock lengths are 120" (3.05 m). B7S135DU 18 / .050" Dark Bronze Anodized 135 Degree Corner
CRL End Caps for B7S Series CRL 12" Welded End Cladding for B7S
Heavy-Duty Square Base Shoe Series Heavy-Duty Square Base Shoe
Finishes
CAT. NO. GA. / THK.
FINISH QTY/PKG
per package.
B7SECBS 18 / .050" Brushed Stainless 1
B7SECPS
B7SECPB
B7SECSB
Image 18 / .050"
18 / .045"
18 / .045"
Polished Stainless
Polished Brass
Satin Brass
1
1
1
CAT. NO.
B7SWCBS
B7SWCPS
FINISH
Brushed Stainless
Polished Stainless
QTY/PKG
1
1
B7SECSA 18 / .050" Satin Anodized 1 B7SWCPB Polished Brass 1
B7SECDU 18 / .050" Dark Bronze Anodized 1 B7SWCSB Satin Brass 1

CRL B5L Series Low Profile Square Base Shoe

• For 1/2" to 5/8" (12 to 16 mm) Glass
• Lower Profile Desired in Residential
and Yacht Applications
• Typically Used as the Base Channel for
Glass Railing Systems or Windscreens
• Drilled and Counter Bored, or We Will
Custom Drill to Your Specifications
• Custom Cutting and Mitering Service
Available
1" 2-1/4"
(25.4 mm) (57.2 mm)
3-1/2"
3-1/2" (88.9 mm)
7/8"
(88.9 mm) (22.2 mm)
1/2" (12.7 mm) 13/16"

(20.6 mm)
2-1/4" (57.2 mm) 9/16" (14.3 mm) Gasket Retention Groove
Hole Pattern "D"

• 6063 Alloy Secures the Top Rubber
Undrilled Gasket in the Base Shoe
12" (305 mm) C.T.C. • T52 Temper
WET GLAZE SYSTEM ONLY

The CRL B5L Series Low Profile Square Base Shoe is used as the base channel
for glass railing systems. It can be clad in six choices of architectural finishes
(see next page). The Low Profile Square Base Shoe is for use with the Wet Glaze
System only. The most critical component in a railing system is the proper
attachment of the Base Shoe to the substrate. CRL has engineered and tested
a variety of attachment methods, and has developed an acceptable combination
of drilling patterns and fasteners. The five tested methods of attachment can be
found on pages R526 to R527, and associated fasteners are shown on pages
R538 to R539. A printed brochure with Instructions, Installation Hints, Cleaning,
For Use with 1/2" (12 mm)
and Refinishing techniques is available. You may also view it at crlaurence.com. or 5/8" (16 mm) Glass
Caution: Low Profile Square Base Shoe cannot be used for the TAPER-LOC™ Dry Glaze System. For Use with 1/2" (12 mm)
or 5/8" (16 mm) Glass
B5L Series Low Profile Square Base Shoe

CAPACITY: Drilling Recommendations,
1/2" (12 mm) or 5/8" (16 mm) Thick Glass when using Wet Glaze System See Pages R539 and R541.
B5L10D 120" (3.05 m) 9/16" (14.3 mm) 7/8" (22.2 mm) x 1/2" (12.7 mm) 12" (305 mm) 61 pounds (28 kg)
B5L20D 240" (6.10 m) 9/16" (14.3 mm) 7/8" (22.2 mm) x 1/2" (12.7 mm) 12" (305 mm) 121 pounds (55 kg)
B5L10 120" (3.05 m) - Extrusion Only (Without Holes) - 61 pounds (28 kg)
B5L20 240" (6.10 m) - Extrusion Only (Without Holes) - 121 pounds (55 kg)
SHIPPING NOTE: Due to the difficulty in packaging and handling 240" (6.10 m) stock lengths, it is suggested that you Will Call these at any of our distribution
centers. If requiring shipment, all packaging and handling concerns must be agreed to by CRL and the customer prior to shipping. All shipping arrangements
will be documented on your quotation for your signed approval.

CRL Cladding for B5L Series Low Profile Base Shoe MANUFACTURED IN THE USA
BY C.R. LAURENCE
CRL Straight Cladding for B5L Series CRL 12" Mitered Corner Cladding for
Low Profile Base Shoe B5L Series Low Profile Base Shoe
six architectural finishes offered in Cap Railing. Each leg is 12"
Service Available (305 mm) in length, and can be secured to the Base Shoe using
Tape, CRL Silicone Sealant, and attachment instructions. Comes
CRL Cladding allows the user to match any of six architectural
four pieces per set.
finishes offered in Cap Railing. It can be secured to the Base Shoe
Cladding Tape, CRL Silicone Sealant, and attachment instructions. B5L90BS 18 / .050" Brushed Stainless 90 Degree Corner
NOTE: Sold by individual pieces. Base Shoe requires two pieces B5L90PS 18 / .050" Polished Stainless 90 Degree Corner
for coverage on both sides. B5L90PB 18 / .045" Polished Brass 90 Degree Corner
B5L90SB 18 / .045" Satin Brass 90 Degree Corner
CAT. NO. GA. / THK. LENGTH FINISH B5L90SA 18 / .050" Satin Anodized 90 Degree Corner
BLCBS10 18 / .050" 120" (3.05 m) Brushed Stainless B5L90DU 18 / .050" Dark Bronze Anodized 90 Degree Corner
BLCPS10 18 / .050" 120" (3.05 m) Polished Stainless B5L135BS 18 / .050" Brushed Stainless 135 Degree Corner
BLCPB10 18 / .045" 120" (3.05 m) Polished Brass B5L135PS 18 / .050" Polished Stainless 135 Degree Corner
BLCSB10 18 / .045" 120" (3.05 m) Satin Brass B5L135PB 18 / .045" Polished Brass 135 Degree Corner
BLCSA10 18 / .050" 120" (3.05 m) Satin Anodized B5L135SB 18 / .045" Satin Brass 135 Degree Corner
BLCDU10 18 / .050" 120" (3.05 m) Dark Bronze Anodized B5L135SA 18 / .050" Satin Anodized 135 Degree Corner
Minimum order: 1 each. All finishes can be combined for quantity pricing. Standard stock lengths are 120" (3.05 m). B5L135DU 18 / .050" Dark Bronze Anodized 135 Degree Corner
CRL End Caps for B5L Series CRL 12" Welded End Cladding for B5L
Low Profile Base Shoe Series Low Profile Base Shoe
Finishes
CAT. NO. GA. / THK. FINISH QTY/PKG
per package.
B5LECBS 18 / .050" Brushed Stainless 1
B5LECPS
B5LECPB
B5LECSB
Image 18 / .050"
18 / .045"
18 / .045"
Polished Stainless
Polished Brass
Satin Brass
1
1
1
CAT. NO.
B5LWCBS
B5LWCPS
FINISH
Brushed Stainless
Polished Stainless
QTY/PKG
1
1
B5LECSA 18 / .050" Satin Anodized 1 B5LWCPB Polished Brass 1
B5LECDU 18 / .050" Dark Bronze Anodized 1 B5LWCSB Satin Brass 1

CRL B5T Series Tapered Base Shoe

• For 1/2" to 5/8" (12 to 16 mm) Glass
• Typically Used as the Base Channel for Glass Railing Systems
Requiring a Flush Installation Embedded in Concrete
• Drilled and Counter Bored, or We Will Custom
Drill to Your Specifications
1" 1-9/16"
(25.4 mm) (39.6 mm)
7/8"
4-1/8" (22.2 mm)
4-1/8" (104.8 mm)
(104.8 mm) 1/2"
(12.7 mm)
Gasket Retention Groove
Secures the Top Rubber
13/16" Gasket in the Base Shoe
(20.6 mm) • 6063 Alloy
2-1/2" (63.5 mm) 9/16" (14.3 mm) • T52 Temper
12" (305 mm) C.T.C. TAPER-LOC™ DRY GLAZE SYSTEM WET GLAZE SYSTEM
The CRL B5T Tapered Base Shoe is typically used as the base channel
for glass railing systems. It can be clad in six choices of architectural finishes
(see next page). The most critical component in a railing system is the proper
attachment of the Base Shoe to the substrate. CRL has engineered and tested
a variety of attachment methods, and has developed an acceptable combination
of drilling patterns and fasteners. The five tested methods of attachment can be
found on pages R526 to R527, and associated fasteners are shown on pages
R538 to R539. A printed brochure with Instructions, Installation Hints, Cleaning, For Use with For Use with 1/2" (12 mm)
and Refinishing techniques is available. You may also view it at crlaurence.com. 1/2" (12 mm) Glass or 5/8" (16 mm) Glass
B5T Series Tapered Base Shoe

CAPACITY:
Drilling Recommendations,
1/2" (12 mm) Thick Glass when using TAPER-LOC™ Dry Glaze System;
See Pages R539 and R541.
1/2" (12 mm) or 5/8" (16 mm) Thick Glass when using Wet Glaze System.
B5T10D 120" (3.05 m) 9/16" (14.3 mm) 7/8" (22.2 mm) x 1/2" (12.7 mm) 12" (305 mm) 57 pounds (26 kg)
B5T20D 240" (6.10 m) 9/16" (14.3 mm) 7/8" (22.2 mm) x 1/2" (12.7 mm) 12" (305 mm) 114 pounds (52 kg)
B5T10 120" (3.05 m) - ∆Extrusion Only (Without Holes) - 57 pounds (26 kg)
B5T20 240" (6.10 m) - ∆Extrusion Only (Without Holes) - 114 pounds (52 kg)

CRL Cladding for B5T Series Tapered Base Shoe MANUFACTURED IN THE USA
BY C.R. LAURENCE
CRL Straight Cladding for B5T Series CRL 12" Mitered Corner Cladding for
Tapered Base Shoe B5T Series Tapered Base Shoe
CRL Cladding allows the user to match any of six architectural Tape, CRL Silicone Sealant, and attachment instructions. Comes
finishes offered in Cap Railing. It can be secured to the Base Shoe four pieces per set.
Cladding Tape, CRL Silicone Sealant, and attachment instructions. B5T90BS 18 / .050" Brushed Stainless 90 Degree Corner
NOTE: Sold by individual pieces. Base Shoe requires two pieces B5T90PS 18 / .050" Polished Stainless 90 Degree Corner
for coverage on both sides. B5T90PB 18 / .045" Polished Brass 90 Degree Corner
B5T90SB 18 / .045" Satin Brass 90 Degree Corner
CAT. NO. GA. / THK. LENGTH FINISH B5T90SA 18 / .050" Satin Anodized 90 Degree Corner
BTCBS10 18 / .050" 120" (3.05 m) Brushed Stainless B5T90DU 18 / .050" Dark Bronze Anodized 90 Degree Corner
BTCPS10 18 / .050" 120" (3.05 m) Polished Stainless B5T135BS 18 / .050" Brushed Stainless 135 Degree Corner
BTCPB10 18 / .045" 120" (3.05 m) Polished Brass B5T135PS 18 / .050" Polished Stainless 135 Degree Corner
BTCSB10 18 / .045" 120" (3.05 m) Satin Brass B5T135PB 18 / .045" Polished Brass 135 Degree Corner
BTCSA10 18 / .050" 120" (3.05 m) Satin Anodized B5T135SB 18 / .045" Satin Brass 135 Degree Corner
BTCDU10 18 / .050" 120" (3.05 m) Dark Bronze Anodized B5T135SA 18 / .050" Satin Anodized 135 Degree Corner
Minimum order: 1 each. All finishes can be combined for quantity pricing. Standard stock lengths are 120" (3.05 m). B5T135DU 18 / .050" Dark Bronze Anodized 135 Degree Corner
CRL End Caps for B5T Series Alternate Base Shoe Finishing Method
Tapered Base Shoe • Preferred for Exterior Installations Where a
• Adhere With More Positive Seal is Required
Cladding Tape or
Silicone Sealant
• Available in Six
Architectural
Finishes
finishes offered in Cap Railing. They can be secured to the Base
An alternate method to finish off the Base Shoe top opening is
Shoe using Cladding Tape or Silicone Sealant. See page R536
to roll in 3/8" (9.5 mm) Foam Backer Rod and run a cap bead of
for CRL Cladding Tape, CRL Silicone Sealant, and attachment
our Cat. No. 95CBL Neutral Cure Silicone (see page R536) over it.
instructions. Comes one per package.
This method is preferred in exterior installations where a more
CAT. NO. GA. / THK. FINISH QTY/PKG positive seal is required.
B5TECBS 18 / .050" Brushed Stainless 1 CAT. NO. DESCRIPTION
B5TECPS
B5TECPB
B5TECSB
Image 18 / .050"
18 / .045"
18 / .045"
Polished Stainless
Polished Brass
Satin Brass
1
1
1
GWFR38
EF38C
Stepped Roller Tool for 3/8" (9.5 mm) Foam Backer Rod
100 Foot (30.5 m) Roll 3/8" (9.5 mm) Foam Backer Rod
EF38B 3600 Foot (1097 m) Roll 3/8" (9.5 mm) Foam Backer Rod
B5TECSA 18 / .050" Satin Anodized 1
B5TECDU 18 / .050" Dark Bronze Anodized 1 For details on these and other CRL products, go to our web site at
Minimum order: 1 each. All finishes can be combined for quantity pricing. crlaurence.com.

CRL Cladding and

Fabrication Services
• Metal Fabricated to Your Specifications
• Available in Many Architectural Finishes
CRL offers Cladding and Fabrication Services for
Headers, Tubing, Channels, and other shapes needed
for architectural projects. For additional information,
contact CRL Technical Sales at (800) 421-6144 in the
U.S., (877) 421-6144 from Canada, or (323) 588-1281
International, and ask for Ext. 7730. You can also e-mail
us through our web site at crlaurence.com. From the
home page click on Contact Us, and then click on
Technical Sales.
CRL Cladding Tape

• Pressure Sensitive High-Strength Adhesive
With Tenacious Holding Power
• Used for Adhering Cladding to Base Shoe
Our AT234 Cladding Tape is used to adhere cladding to Base Shoe.
Made of a high strength acrylic foam with a high tack adhesive, it is CAT. NO. THICKNESS WIDTH ROLL LENGTH
used in conjunction with our 95CBL Silicone for a permanent, secure AT234 .045" (1.1 mm) 3/4" (19 mm) 108' (32.9 m)
bond. See below for suggested application details. Minimum order: 1 roll.
CRL Neutral Cure Silicone

• Used to Adhere Cladding to Base
Shoe and Cap Rail to Glass
• Neutral Cure, Waterproof Formula Use our 95CBL Silicone to adhere Cladding to Base Shoe
and Cap Rail to glass. Neutral cure for use with brass material
• Excellent Primerless Adhesion to to avoid adverse reactions. Best when used in conjunction with
Most Common Construction Substrates our AT234 Tape for a permanent, secure bond. See below for
suggested application details. 95CBL can also be used for
• Can Be Applied in All Temperatures dressing off and finishing the top of the Base Shoe pocket
CAT. NO. COLOR CONTENTS CTGS/CASE (see page R535).
95CBL Black 10.3 Fl. Oz. (304 ml) 30 For our complete selection of CRL Silicones visit our web site
Minimum order: 1 each. All cartridge sealants can be combined for quantity pricing. Also available in 2 or 4.5 gallon pails. at crlaurence.com.
Application Suggestions for CRL Cladding

There are various methods of attaching the Cladding to the Base Shoe. All three types shown below will work, but a combination of Cladding
Tape and Neutral Cure Silicone (Type C) offers the better of two worlds; the instant bond of the tape along with the speed of application of the
silicone and its flexible, durable adhesion. We invite you to contact CRL Technical Sales to discuss your individual application.
Type A: Apply three rows of Tape to the vertical edge Type B: Apply Silicone to the vertical edge of the Type C: Apply two rows of Tape to the vertical edge
of the Cladding. Carefully align the Cladding to the Base Cladding. Carefully align Cladding to the Base Shoe and of the Cladding, one toward the top and one toward the
Shoe and press in place. press in place. Use clamps to hold the Cladding in place bottom. Apply the Silicone between the rows of Tape.
until the Silicone cures. Carefully align the Cladding to the Base Shoe and press
in place.

CRL Aluminum Shim Strips

• Available in Three
Thicknesses:
1/64", 1/32", and
1/16" to Adjust
Base Shoe to
Plumb Position

BY C.R. LAURENCE
CRL Aluminum Shim Strips are used under one side of the
Base Shoe to adjust it into a plumb position before securing it
with the fasteners. Length can be trimmed as required for an
exact fit.
CAT. NO. THICKNESS WIDTH LENGTH QTY/PKG
BSS164 1/64" (0.40 mm) 3/4" (19 mm) 24" (610 mm) 10
BSS132 1/32" (0.80 mm) 3/4" (19 mm) 24" (610 mm) 10
BSS116 1/16" (1.6 mm) 3/4" (19 mm) 24" (610 mm) 10
Minimum order: 1 package. Sizes can be combined for quantity pricing.
CRL Aluminum Horseshoe Shims CRL Aluminum Drain Blocks

• Available in Three Thicknesses: • Placed Under Base Shoe
1/16", 1/8", and 1/4" to Provide Drainage Space MANUFACTURED IN THE USA
BY C.R. LAURENCE
• Won’t Compress Under Base Shoe • Great for Balconies

and Decks
3/8"
(9.5 mm)
2-1/4"
L 2-1/2" (57.1 mm)
(63.5 mm)
W
• Black Powder
CRL Aluminum Horseshoe Shims are ideal for Base Shoe Coat Finish
installations. They will not compress or project beyond the Base Place CRL Aluminum Drain Blocks under exterior installed Base
Shoe. They are also the same base metal as the Base Shoe, so Shoes to provide drainage space for water run-off. This is especially
corrosion is minimized. Different thicknesses can be stacked to important where Base Shoe will be installed on balconies or decks
fill odd size gaps. where water could pool unless proper drainage is available. One
CAT. NO. THICKNESS "W" WIDTH "L" LENGTH QTY/PKG Drain Block should be placed under each mounting hole. Blocks can
AHS66 1/16" (1.6 mm) 2" (50.8 mm) 3" (76.2 mm) 100 be rotated to fit different width Base Shoes.
AHS68 1/8" (3.2 mm) 2" (50.8 mm) 3" (76.2 mm) 100 CAT. NO. THICKNESS WIDTH LENGTH QTY/PKG
AHS64 1/4" (6.3 mm) 2" (50.8 mm) 3" (76.2 mm) 100 BSDB38 3/8" (9.5 mm) 2-1/4" (57.1 mm) 2-1/2" (63.5 mm) 10
Minimum order: 100 each. Must be ordered in increments of 100. Sizes can be combined for quantity pricing. Minimum order: 1 package.

Planning and Pre-Installation Visits to Job Site Can Cut Costs

CRL has made every effort to improve the installation process, First of all, a magnetic base drill press is required to apply
and to make it easier. We directed our efforts at existing products enough pressure to the drill bit for it to drill properly. Then after
and processes, and incorporated innovative ideas and requests from drilling through the steel, the drill bit comes in contact with the
our customers. We offer the most services in the industry: cutting, concrete and is dulled after only one use. Next you must drill a
mitering, hole fabrication, two systems for securing the glass (The clearance hole in the concrete with a masonry drill. Finally, the
GlassWedge® Dry Glaze System or the Standard Wet Glaze System). hole needs to be tapped, and after three or four holes, that tap is
In addition, we have developed laser assisted systems to assure ruined by the concrete.
your glass is plumb, clamp and alignment fixtures to secure the glass Pre-Installation Solution: The easiest way to correct this
in place while the cement dries, pumping equipment for the cement, situation is to drill and tap the steel attachments before they are
and more. installed. Care must be taken to ensure drilled and tapped holes
The one area that is out of our control is the Substrate Attachment match holes in Base Shoe, fabrication tolerances can affect 12"
Area at the job site. Below we give you advice on how to plan or (305 mm) centers. Then, to provide clearance behind the steel and
correct this area so you will have a smooth installation. First we will protect the threads from concrete, install CRL Nylon Thread Protecting
address potential problems, and then we will give you the best Allen Screws (see below). These screws are tightened until they
solutions to correct these problems. are flush with the outside surface, which usually makes them project
Base Shoe Attachments to Concrete: Because of the beyond the back surface, and allows back clearance for the final
advancements in today’s anchoring systems, securing the Base Shoe attaching Socket Head Cap Screw (see page R539). As a
to concrete is now a simple matter of aligning the Base Shoe, drilling precaution against concrete getting into the Allen Screw socket,
holes and inserting anchors. The holes in the Base Shoe act as an making it difficult to remove, we suggest applying a piece of duct
alignment fix for proper hole position. If re-bar obstruction occurs, tape over each Allen Screw.
additional drilling of Base Shoe may be required. After drilling, all After Installation Corrective Solution: If the steel attachments
that is necessary is to vacuum out the holes and install the are installed in the concrete without the holes being drilled and
Wedge-Bolt Anchors and Washers (see page R539). tapped, the only simple corrective action that can be done is to use
Base Shoe Attachments to Steel Angles, Channels, or CRL Weld Blocks. This is really an easy solution and is often the
Embedments: This is an area where problems can occur. They can preferred way to install the Base Shoe. By attaching the CRL Weld
be addressed either as pre-installation solutions, or as after-installation Blocks (see below) to the Base Shoe with Socket Head Cap Screws
corrective solutions. (see page R539), you can simply position the Base Shoe in the
A major problem is that if the steel angles, channels or proper location, clamp it in place, and weld the Weld Blocks to the
embedmentsare set in place, and concrete is poured without Base steel attachment surface. One advantage of using CRL Weld Blocks
Shoe attachment holes being drilled and tapped, doing it afterwards is you never have to worry about hole alignment. The Weld Blocks
is nearly impossible. can be attached at your shop.
CRL Thread Protecting CRL Weld Blocks

Nylon Allen Screws • Fabricated and
Ready to Weld
• Protect Threaded
Holes From • Eliminates the Need
Concrete for Drilling and
Contamination Tapping on Job Site
1/2"-13
Tapped Hole
1/2" Weld Block
(12.7 mm)
Weld Blocks are manufactured for use with the CRL Base Shoes.
When welded to a structurally sound steel beam or angle, they
provide an attachment point using our pre-drilled Base Shoes and
our Cat. No. SHCS12X34 Stainless Steel Socket Head Cap Screws
Thread Protecting Nylon Allen Screws are used to protect the (see page R539). A favorite technique is to attach the Weld Blocks
threaded holes in steel attachments from concrete contamination, to the Base Shoe, set it in the proper position, and then weld the
and provide a clearance area behind the attachment. Simply insert Weld Blocks to the beam, angle, or embedment plate. Weld Blocks
the Nylon Allen Screws until the top is flush with the steel attachment. are made of hot rolled steel with a centered 1/2"-13 tapped hole.
Cover with duct tape to protect the wrench opening. After the steel
CAT. NO. DESCRIPTION QTY/PACK
attachment is set in concrete, remove the tape and Nylon Allen
BSWB12 2-1/2" (63.5 mm) x 2-1/4" (57.2 mm) x 1/2" (12.7 mm) 10
Screws so the Base Shoe can be attached.
Use With B5S, B5T, B5L Series Base Shoe
CAT. NO. DESCRIPTION QTY/CARTON BSWB712 2-1/2" (63.5 mm) x 2-3/4" (69.9 mm) x 1/2" (12.7 mm) 10
NAS12X1 1/2"-13 x 1" (25.4 mm) Nylon Allen Screws 100 Use With B7S Series Base Shoe
Minimum order is 100 each. Must be ordered in increments of 100. Minimum order: 1 pack. Packaged 10 per pack.

Base Shoe Fasteners and Accessories

CRL Wedge-Bolt Anchors
Using the proper Insert the Wedge-Bolt Continue tightening the
diameter ANSI Grade through the Wedge-Bolt Wedge-Bolt until the
drill bit, drill a hole into Washer and Base Shoe Wedge-Bolt and Washer
the concrete to a depth into the Wedge-Bolt hole. are firmly seated against
of at least 1/2" Begin tightening the the Base Shoe while
(12.7 mm), or one Wedge-Bolt by rotating achieving the required
anchor diameter deeper clockwise and applying embedment depth.
than the embedment downward pressure. This In extremely dense
required. Blow the hole will engage the first few materials, use of an
clean of dust and other threads as the Wedge- impact wrench
material. Bolt begins to advance. 1/2” is recommended.
Clearance
Wedge-Bolt Anchors achieve their load capacity by the thread

undercutting the base material. Up to 40 ft./lbs. of torque can be applied CAT. NO. DESCRIPTION QTY/BOX
in 4000 psi concrete to achieve maximum clamping torque to the Base WBA14X3 1/4" x 3" (6.3 x 76.2 mm) Wedge-Bolt Anchor 50
Shoe. Wedge-Bolt Anchors are manufactured from heat treated carbon WBAW14* Wedge-Bolt Washer for WBA14X3 50
WBA38X4 3/8" x 4" (9.5 x 101.6 mm) Wedge-Bolt Anchor 50
steel, bright zinc plated with a chromate treatment. NOTE: Cat. No.
WBAW38* Wedge-Bolt Washer for WBA38X4 50
WBA14X3 for use with W5B Small Profile Windscreen Base and Cat.
Minimum order is 50 each. Must be ordered in increments of 50. *Must be used with Wedge-Bolt Anchors to
No. WBA38X4 is for use with B5L, B5S, B5T, and B7S Base Shoes. achieve the required attachment strength of the Base Shoe to the concrete.
CRL Socket Head Cap Screws CRL Impact Sockets and Accessories
Extension 7/16" Socket

CAT. NO. 7175P CAT. NO. 7714H
• 304
Stainless
Steel
CRL Socket Head Cap Screws are used to secure glass railing
3/8" Hex Bit 9/16" Socket
Base Shoe to approved 1/2" (12.7 mm) steel embedment plates with a
minimum 1/2" (12.7 mm) of thread engagement. Also works with CRL CAT. NO. 7290 CAT. NO. 7718H
Weld Blocks (see page R538). CAT. NO. DESCRIPTION
CAT. NO. DESCRIPTION 7175P 3/8" Drive – 3" (76.2 mm) Drive Extension
7714H 3/8" Drive – 7/16" (11.1 mm) Deep Socket 6 pt.
SHCS12X34 1/2"-13 x 3/4" (19 mm) Socket Head Cap Screw
7718H 3/8" Drive – 9/16" (14.3 mm) Deep Socket 6 pt.
SHCS12X1 1/2"-13 x 1" (25.4 mm) Socket Head Cap Screw
7290 3/8" Drive – 3/8" (9.5 mm) Hex Bit
SHCS12X112 1/2"-13 x 1-1/2" (38.1 mm) Socket Head Cap Screw
Minimum order is 10 each. Must be ordered in increments of 10.
CRL Makita 1" Rotary CRL S.D.S. Masonry Drills

Hammer Drill • ANSI Spec. for
Wedge-Bolts
• Variable Speed These Masonry Drills are made
to the ANSI Specifications required
0 to 1100 RPM for the proper performance of
• 7 Amp Motor Wedge-Bolts. Life expectancy:
100-500 holes, depending on
• Uses S.D.S. Drills substrate and drill used. They work in both regular and impact
• 0 to 4500 Blows drills, and can be used in a number of masonry materials. For more
details on these tools and fasteners, visit the CRL Web Site at
Per Minute CAT. NO. HR2455X crlaurence.com.
Includes: Depth Gauge, Side
Handle, and Carrying Case
This Heavy-Duty 1" (25 mm) Rotary Hammer has a variable speed
CAT. NO. DIAMETER LENGTH
and reversing motor, and is ideal for Wedge-Bolt drilling. It features .495" (12.6 mm) 12" (304.8 mm)
SDSW12
a quick bit changeover system for positive bit retention, and a SDSW38 .389" (9.9 mm) 12" (304.8 mm)
conveniently located reversing switch. Readily accepts S.D.S. SDSW14 .259" (6.6 mm) 8" (203.2 mm)
Plus or Dual Slot type masonry bits. Minimum order is one each. Minimum order: 1 each.

This Base Shoe Quote/Order Checklist is designed to assist you in covering the details required to complete a Base Shoe installation.
Mark the boxes in the Checklist Area that apply to your installation. Going through this exercise should prevent you from overlooking any
details related to your installation, and assist you in making your product selections. The Product Selection Area is where you can actually
write down the complete catalog numbers of the products you have selected.
IMPORTANT: Depending on the complexity of your project, one or more of the following may be required to accurately quote: sketches
or drawings of your particular application with dimensions; printed architectural drawings or CAD files; photos of job site conditions (digital
images are preferable). NOTE: A final sign off is required prior to any custom fabrication.
Date:______________ Company Name:______________________________________________Phone #:________________________________
Project Name:_______________________________________________ Your Name:_________________________________________________
Checklist Area:
1 Type of Attachment: (See pages R526-R527) 4 Glass Securing Accessories: (See pages R515, R518, R523-R524)
Base Shoe to Concrete TAPER-LOC™ Dry Glaze 1/2" and 3/4" (12 and 19 mm)
Base Shoe to Weld Block Wet Glaze 1/2" (12 mm) Setting and Centering Blocks
Base Shoe to Steel Channel or Angle Wet Glaze 5/8" (16 mm) Setting and Centering Blocks
Base Shoe Embedded in Concrete (Flush Set) Wet Glaze 3/4" (19 mm) Setting and Centering Blocks
Base Shoe to Steel Embedment Strip 1/4" (6 mm) Spacing and Sealing Pads for 1/2" (12 mm) Glass
1/4" (6 mm) Spacing and Sealing Pads for 3/4" (19 mm) Glass
2 Attachment Fasteners and Accessories: (See pages R538-R539) 1/4" (6 mm) Rigid Rubber Spacing Blocks for 1/2" (12 mm) Glass
Wedge-Bolt Anchors and Washers (For Concrete) 1/4" (6 mm) Rigid Rubber Spacing Blocks for 3/4" (19 mm) Glass
1/2"-13 Socket Head Cap Screws (For Steel) Base Shoe Gasket [for 1/2" (12 mm) and 3/4" (19 mm) Glass Only]
Weld Blocks (For Steel) Drain Blocks Expanding Cement
Nylon Allen Screws (Protects Steel Embedment Threads)
5 Cladding Required: (See pages R529, R531, R533, R535)
3 Style of Base Shoe and Glass Securing Method: (See pages R528-R535)
Yes No
B5S Series Square for 1/2" (12 mm) Glass – Dry Glaze
Stock Finish: Custom Finish:
B5S Series Square for 1/2" (12 mm) Glass – Wet Glaze
Brushed Stainless Steel US32D
Polished Stainless Steel US32
B5T Series Tapered for 1/2" (12 mm) Glass – Dry Glaze
Polished Brass US3
B5T Series Tapered for 1/2" (12 mm) Glass – Wet Glaze
Satin Brass US4
B5T Series Tapered for 5/8" (16 mm) Glass – Wet Glaze
Satin Anodized US28
B5L Series Square for 1/2" (12 mm) Glass – Wet Glaze
Dark Bronze Anodized 313
B5L Series Square for 5/8" (16 mm) Glass – Wet Glaze
B7S Series Square for 3/4" (19 mm) Glass – Dry Glaze Cladding Length:
120" (3.05 m) Stock Length
Base Shoe Length: Custom Length up to 168" (4.26 m) (Cuts, L.H. Miter or R.H. Miter)
120" (3.05 m) 240" (6.10 m) Cladding Accessories: (See pages R529, R531, R533, R535-R536)
Custom Length (Cuts, L.H. Miter or R.H. Miter)
End Caps
Mitered Corner Sets
Base Shoe Hole Fabrication:
Welded End Caps
No Fabrication Drill and Counter Bore on 12" (305 mm) Centers
Cladding Securing Tape
Other _________________________________________________
Cladding Securing Silicone Sealant
Product Selection: (Fill in Appropriate Areas for All Products That Will Be Required for the Job)
PRODUCT CAT. NO. QTY. PRODUCT CAT. NO. QTY.
Base Shoe Cladding Stock Lengths
TAPER-LOC™ Sets End Caps
Expanding Cement Corners
Setting/Centering Blocks Fasteners
Spacing/Sealing Pads Tape
Rigid Rubber Spacers Silicone Sealant
Base Shoe Gasket Installation Tools
Fax Completed Checklist to: C.R. Laurence Technical Sales at (800) 587-7501 in the U.S., or (323) 584-5289 (Canada or International).
To discuss call: (800) 421-6144 in the U.S., (877) 421-6144 from Canada, or (323) 588-1281 (International). Ask for Extension 7730.

Certification of Testing
• Test Results Available for Both TAPER-LOC™ Dry Glaze System and Wet Glaze System
• Complete Information May Be Downloaded From PDF Files at crlaurence.com
• Hard Copy Results Also Available With Consulting Engineer’s Seal and Signature for a Modest Fee

CRL EGR ELEVATED GLASS RAILING SYSTEM Contact CRL Tech Sales for complete planning
CRL EGR Elevated new

Glass Railing System
• Provides Excellent Drainage Capability for
Residential or Commercial Applications
• Excellent for High-Rise Balconies
• Meets or Exceeds Guard Rail Code Standards
• Specially Designed Base Shoe Accepts
1/2" (12 mm) Tempered Glass
• Seven Standard Powder Coated Finishes;
Custom Finishes Also Available
• Custom Drilling and Fabrication Available
CRL’s EGR Elevated Glass Railing System was designed for
those applications that require substantial clearance underneath
the Base Shoe for drainage, such as the balconies of high-rise
hotels or condominiums. The EGR System allows water and
debris to escape beneath the Base Shoe, and not dam up over
time. This attractive system will meet these requirements and,
at the same time, look good doing it.
The most critical component in any railing system is the proper
attachment of the Base Shoe Stanchions to the substrate. CRL
has engineered a Core Mounted System that will suit both
residential and commercial applications.
On the following pages you can see how EGR Base Shoe
works with our GRS Cap Rails and Wet Glaze Installation
Method to complete the project.
CRL Cap Rail

BY C.R. LAURENCE 1/2" (12 mm)
Tempered Glass
Kwixset® Expanding
Cement
Elevated Glass Railing

3-1/2" Base Shoe
2" (50.8 mm) (88.9 mm)
Clearance Stainless Steel
Between Base Stanchion
Shoe and Floor Welded Grout Lock
3"
(76.2 mm)
24"
4000 PSI (609.6 mm)
Normal Weight Maximum On Center
Concrete Stanchion Spacing
6"
(152.4 mm)

CRL EGR ELEVATED GLASS RAILING SYSTEM For Pricing on CRL Products, Call Toll Free
CRL EGR Elevated new

BY C.R. LAURENCE
The CRL EGR Elevated Glass Railing System gives the

user a high-end commercial look, while maintaining the strength
and durability required to allow water and debris to drain and not
pool, as is common with typical surface mounted railings.
Installation is no more difficult than with normal railing systems,
and many of the components are shared with our GRS Cap Railing
System, so inventories of required parts are well stocked, assuring
you of short lead times.
CRL Cap Rail

(pages R553 to R556)
STANDARD COLORS
GR5PV Cap
Rail Vinyl
(page R557)
Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
Gloss Gloss Gloss Gloss Matte Gloss Matte
1/2" (12 mm) Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is critical,
Tempered Glass please contact Technical Sales for additional information.
Additional Color Options - CRL has over 250 quick turn custom color options with
the ability to color match a well.
GR5UB4
Setting Blocks
(page R524)
Elevated Glass Railing

Base Shoe (page R544)
Stanchion Cover
(page R545)
Stainless Steel
Stanchion
(page R544
Welded Grout
Lock

CRL EGR ELEVATED GLASS RAILING SYSTEM Contact CRL Tech Sales for complete planning
CRL EGR Elevated Glass Railing Base Shoe

• Ideal for Balconies That Require Clearance
Under the Bottom Rail for Drainage new
• 6063 Aluminum Alloy T5 Temper
• Custom Drilling and Fabrication Available
• Seven Standard Powder Coated Finishes;
Custom Colors Also Available
• Pre-Drilled Slotted Holes 12" on Center for
Easy Installation
CRL’s EGR Elevated Glass Railing Base Shoe is used as the
base channel for elevated 1/2" (12 mm) tempered glass balusters
utilizing the Wet Glaze Method of installing the glass. It is Gasket Retention Groove
perched atop our EGR Stanchions to allow for drainage of water Secures the Top Rubber
Gasket in the Base Shoe
and debris, so critical in high-rise and other commercial
applications. Installation to the Stanchions is by Stainless Steel
Socket Head Cap Screw Fasteners through 24" (609.6 mm) on
center pre-drilled and slotted holes in the Base Shoe, after the 2-1/4"
Stanchions have been set in the concrete substrate. (57.2 mm)
CRL offers Elevated Glass Railing Base Shoe in mill finish or
powder coated with one of our seven standard colors (see page
R543). If your project requires a custom color, our manufacturing
facility can offer over 250 quick turn custom color options, with the
ability to color match as well. Custom drilling and fabrication of the 3-1/2"
(88.9 mm) 7/8"
Base Shoe is also available on special order. Contact CRL (22.2 mm)
Technical Sales for details or a quote.
1/2" (12.7 mm) 13/16"
CAT. NO. DESCRIPTION FINISH (20.6 mm)
EGRB10D *10'-0' (3.05 m) Elevated Base Shoe Mill
9/16" (14.3 mm)
EGRB10DP∆ *10'-0' (3.05 m) Elevated Base Shoe Powder Coated
Pre-drilled Slotted Holes
Minimum order: 1 each. * Stock lengths have a tolerance of plus or minus 3/4" (19 mm). Must ship common carrier.
Specify powder coat color when ordering.
CRL EGR Stanchion Assembly 2" new

• Supplied Complete With Steel Washer and 2" (50.8 mm)
(50.8 mm)
Ready to Install Into Concrete Substrate
• Grade 304 Stainless Steel MANUFACTURED IN THE USA
BY C.R. LAURENCE
• Stanchion Drilled and Tapped for

1/2" Socket Head Cap Screw
• Easy Installation
Steel Washer 1/2" (12 mm)
The most critical component in erecting a safe railing system
CAT. NO. EGRW1 Tempered Glass
is the proper attachment of the Stanchion to the substrate. CRL
Kwixset® Expanding
has engineered these Stanchions for residential or commercial Cement
applications of our Elevated Glass Railing System. Elevated Glass
CRL’s EGR Stanchions are designed for core-mounted Railing Base Shoe
installations in concrete. When installing the 5" (127 mm) Socket Head Cap Screw
3-1/2" Steel Washer
Stanchions the minimum embedment depth is 3" (76.2 mm), (88.9 mm) Stanchion Cover
giving you a 2" (50.8 mm) clearance under the Elevated Base Shoe. (sold separately)
NOTE: Use CRL Cat. No. SHCS12X34 Socket Head Cap Screws Stainless Steel
2" (50.8 mm) Clearance
(see page R539) to properly secure the Base Shoe with the included Between Base Shoe and Floor Stanchion
Steel Washer to the Stanchion. All Stanchions must be installed onto
the concrete substrate before the Base Shoe can be set in place with
3"
Socket Head Cap Screws. Installation instructions are included. (76.2 mm)
CAT. NO. DESCRIPTION FINISH
EGRSA4 5" (127 mm) Stanchion Assembly Mill
EGRW1 Replacement Steel Washer *Mill
6"
Minimum order: 1 each. *Minimum order 10 each.
(152.4 mm)

CRL EGR ELEVATED GLASS RAILING SYSTEM For Pricing on CRL Products, Call Toll Free
CRL EGR Stanchion Covers new

Stanchion
• Matches Shape and Color of Elevated Base Shoe Cover
2"
• Available Pre-Cut for Easy Installation (50.8 mm)
CRL’s EGR Aluminum Stanchion Covers are design to sleeve over CRL Stainless
Steel Stanchion
the embedded Stainless Steel Stanchions before the Base Shoe is 2"
installed. Standard 2" (50.8 mm) size or 36" (914 mm) lengths you (50.8 mm)
can cut to required height.
CAT. NO.* LENGTH FINISH* 3"
(76.2 mm)
EGRSC2 2" (50.8 mm) Powder Coated
EGRSC36 36" (914 mm) Powder Coated Stanchion sold separately,
Minimum order: 1 each. * Specify powder coat color when ordering. See page R544
Seam Shoe Over Stanchion with
CRL EGR new Splice

Plate
Stainless Steel Splice Plate
Splice Plates
• Designed to Align and
Splice Elevated Base Shoe
• 304 Alloy Stainless Steel
• Supplied With Anchor Screws Drilled and Counter Bored Hole for 1/2"-13 x 2"
Flat Socket Head Stainless Steel Screw
CRL's EGR Stainless Steel Splice Plates are used to splice 6"
together straight lengths of the Elevated Base Shoe. Splice Plates (152.4 mm)
measure 1/4" (6.3 mm) thick, and are 15/16" (23.8 mm) wide by 6"
(152.4 mm) long. Splice Plates are constructed from 304 alloy
stainless steel. 15/16"
(23.8 mm)
Each Splice Plate is supplied with four 1/2"-13 x 2" (50.8 mm)
Flat Socket Head Stainless Screws.
CAT. NO. DESCRIPTION MATERIAL 5/8" 1-1/2" 1-3/4" 1-1/2" 5/8"

(15.9 mm) (38.1 mm) (44.4 mm) (38.1 mm) (15.9 mm)
EGRSP1 Splice Plate Stainless Steel
Minimum order: 10 each. Must be ordered in increments of 10.
Cap Rails Cap Rail Vinyl Setting Blocks Expanding Cement
See pages R553 to R556 See page R557 See page R524 See page R523

CRL SPECIALTY BASE SHOE Contact CRL Tech Sales for complete planning
CRL Small Profile Windscreen Base Shoe

for 3/8" (10 mm) or 1/2" (12 mm) Glass
• Ideal for Windscreens and Privacy Partitions
• Drilled and Counter Bored, or We Will Custom
Drill to Your Specifications
• Custom Cutting and Mitering Services
1-3/8" (35 mm) 1-3/8" (35 mm)
49/64" 49/64"
(19.4 mm) (19.4 mm)
2-3/4" 1-15/16" 2-3/4" 1-15/16"

(69.9 mm) (49.2 mm) (69.9 mm) (49.2 mm)
47/64"
(18.6 mm)
1/4"
13/16" (6.3 mm) 13/16"
(20.6 mm) (20.6 mm) • 6063 Alloy
11/32" (8.7 mm) • T52 Temper
CRL Small Profile Windscreen Base Shoe for 3/8" or 1/2" (10 or Extruded aluminum Small Profile Base Shoe can be clad in six
12 mm) tempered glass is typically used as the base channel for different architectural finishes (see page R548). Roll-In Vinyl is
windscreens and privacy partitions. It is not recommended for Hand available for dressing off the top opening (see page R548). A printed
Rail/Guard Rail applications. The glass is secured using the Wet Instruction, Installation Hints, Cleaning and Refinishing brochure is
Glaze Method. The Base Shoe is available either pre-drilled or without available. You may also view it on our web site at crlaurence.com.
holes (see chart below). The pre-drilled Base Shoe is designed to use
our Cat. No. WBA14X3 1/4" x 3" (6 mm x 76.2 mm) Wedge-Bolt NOTE: The most important part of the Base Shoe installation is
Anchors and Cat. No. AV1376 Washers for concrete applications, 1/4" being sure that it is attached firmly with approved fasteners to a
(6 mm) Hex Lag Bolts for wood applications, or 1/4" (6 mm) Hex Bolts secure substrate. Contact CRL Technical Sales if you need
for metal or thru-bolt applications. assistance with fastener selection.
CAT. NO. STOCK LENGTH HOLE SIZE COUNTER BORE X DEPTH CENTER-TO-CENTER WEIGHT
W5B10D 120" (3.05 m) 11/32" (9 mm) 47/64" x 1/4" (19 x 6.3 mm) 12" (305 mm) 28 Lbs. (13 kg)
W5B20D 240" (6.10 m) 11/32" (9 mm) 47/64" x 1/4" (19 x 6.3 mm) 12" (305 mm) 55 Lbs. (25 kg)
W5B10 120" (3.05 m) - Extrusion Only (Without Holes) - 28 Lbs. (13 kg)
W5B20 240" (6.10 m) - Extrusion Only (Without Holes) - 55 Lbs. (25 kg)
Minimum order: 1 each. All Base Shoe can be combined for quantity pricing. Must ship common carrier.
SHIPPING NOTICE: Due to the difficulty in packaging and handling 240" (6.10 m) stock lengths, it is suggested that you Will Call these at any of our regional distribution centers.
If requiring shipment, all packaging and handling concerns must be agreed to by CRL and the customer prior to shipping. All shipping arrangements will be documented on your
quotation for your signed approval.
Accessories for Small Profile Windscreen Base Shoe

Base Shoe Cladding Mitered Corner Cladding End Caps Roll-in Vinyl
See page R548 See page R548 See page R548 See page R548

CRL SPECIALTY BASE SHOE For Pricing on CRL Products, Call Toll Free
CRL Smoke Baffle Base Shoe

for 1/2" (12 mm) Glass
• For Fabricating Almost Invisible Smoke
Curtains From 1/2" (12 mm) Glass
• Glass is Mechanically Secured With
Fasteners and Grommets
• Custom Drilling, Mitering, and Cutting
Services Available 1-17/32" Drilled and Countersunk
(38.9 mm) for 1/4" (6.3 mm)
Flat Head Fasteners
@ 12" (305 mm) CTC
(Fasteners not included)
Cladding
13/16"
(20.6 mm)
1-1/4" (31.7 mm) 2-3/16" (55.5 mm)

from
Edge of Glass 2-51/64" (71 mm)
Center of 3/4" (19 mm)
Dia. Hole In Glass 39/64" (15.5 mm)
Seal
(Included)
1/4"-20 FMS x 1-1/4" (31.7 mm)
Nylon Bushing S/S @ 12" (305 mm) CTC
(Included) (Included)
1/2" (12 mm)
CRL Smoke Baffle Tempered Glass
(By Others)
With Cladding
CRL Smoke Baffle Base Shoe is designed to provide an almost Extruded aluminum Smoke Baffle Base Shoe simply attaches to
invisible 1/2" (12 mm) tempered glass smoke curtain. Many of the ceiling structure so the glass can hang straight down. The glass
today’s fire codes require large offices or retail areas to be broken is secured with screws going through nylon grommets (both included),
down into smaller, more manageable areas that can be monitored by that fit into 3/4" (19 mm) holes drilled in the glass on 12" (305 mm)
smoke detectors. This is the specific application for smoke baffles or centers. A glass fabrication template is included. Cladding in six
curtains. Smoke curtains work to retain smoke in a specific area of architectural finishes is available (see page R548). For additional
a specified square footage. Some sprinkler systems are activated by Base Shoe specifications visit our web site at crlaurence.com.
a smoke alarm, so sectioning off areas through the use of smoke
curtains can prevent unnecessary sprinkler activation. NOTE: Check your local building codes for regulations pertaining to
ceiling area square footage and required depth specifications for
smoke baffles or glass curtains.
CAT. NO. STOCK LENGTH CEILING ATTACHMENT GLASS ATTACHMENT WEIGHT
B5B10 ▲ 120" (3.05 m) Requires (10) 1/4" (6.3 mm) Flat Head Fasteners Requires 3/4" (19 mm) Holes 38 Lbs. (17 kg)
B5B20 ▲ 240" (6.10 m) Requires (20) 1/4" (6.3 mm) Flat Head Fasteners Requires 3/4" (19 mm) Holes 75 Lbs. (34 kg)
Minimum order: 1 each. All Base Shoe can be combined for quantity pricing. ▲ Comes with GR5PV Cap Rail Vinyl, glass mounting grommets and fasteners, and RG12100 Roll-In Vinyl. Must ship common carrier.
SHIPPING NOTICE: Due to the difficulty in packaging and handling 240" (6.10 m) stock lengths, it is suggested that you Will Call these at any of our regional distribution centers.
If requiring shipment, all packaging and handling concerns must be agreed to by CRL and the customer prior to shipping. All shipping arrangements will be documented on your
quotation for your signed approval.
Accessories for Smoke Baffle Base Shoe

Base Shoe Cladding Mitered Corner Cladding End Caps Roll-in Vinyl and Cap Vinyl

CRL SPECIALTY BASE SHOE Contact CRL Tech Sales for complete planning
CRL Cladding for Windscreen CRL 12" Mitered Corner

and Smoke Baffle Base Shoe Cladding for Windscreen
BY C.R. LAURENCE MANUFACTURED IN THE USA
An ISO9001:2000 Certified Company BY C.R. LAURENCE
• Adhere With Cladding and Smoke Baffle Base Shoe

Tape or Silicone Sealant
• 90 Degree and 135 Degree
• Six Architectural Finishes Corner Sets in Six
• Custom Cutting and Architectural Finishes
Mitering Service • Adhere With Cladding Tape
CRL Cladding is available in six architectural finishes. It can be or Silicone Sealant
secured to the Base Shoe using Cladding Tape or Silicone Sealant.
CRL Mitered Corner Cladding is available in six architectural
See page R536 for CRL Cladding Tape, CRL Silicone Sealant, and
finishes. Each leg is 12" (305 mm) in length, and can be secured to
attachment instructions.
the Base Shoe using Cladding Tape or Silicone Sealant. See page
CAT. NO. FINISH GA. / THK. STOCK LENGTH R536 for CRL Cladding Tape, CRL Silicone Sealant, and
BWCBS10 Brushed Stainless 18 / .050" 120" (3.05 m) attachment instructions. Sold only in sets of four pieces.
BWCPS10 Polished Stainless 18 / .050" 120" (3.05 m)
Polished Brass 18 / .045" 120" (3.05 m) CAT. NO. FINISH GA. / THK. DESCRIPTION
BWCPB10
BWCSB10 Satin Brass 18 / .045" 120" (3.05 m) B5W90BS Brushed Stainless 18 / .050" 90 Degree Corner
BWCSA10 Satin Anodized 18 / .050" 120" (3.05 m) B5W90PS Polished Stainless 18 / .050" 90 Degree Corner
BWCDU10 Dark Bronze Anodized 18 / .050" 120" (3.05 m) B5W90PB Polished Brass 18 / .045" 90 Degree Corner
Minimum order: 1 each. Must ship common carrier. NOTE: Cladding in lengths up to 168" (4.27 m) can be fabricated B5W90SB Satin Brass 18 / .045" 90 Degree Corner
on special order. Satin Anodized 18 / .050" 90 Degree Corner
B5W90SA
B5W90DU Dark Bronze Anodized 18 / .050" 90 Degree Corner
Brushed Stainless 18 / .050" 135 Degree Corner
CRL End Caps for Windscreen B5W135BS
B5W135PS Polished Stainless 18 / .050" 135 Degree Corner
Polished Brass 18 / .045" 135 Degree Corner
and Smoke Baffle Base Shoe MANUFACTURED IN THE USA
BY C.R. LAURENCE
B5W135PB
B5W135SB Satin Brass 18 / .045" 135 Degree Corner
B5W135SA Satin Anodized 18 / .050" 135 Degree Corner
• Adhere With Cladding B5W135DU Dark Bronze Anodized 18 / .050" 135 Degree Corner
Tape or Silicone Sealant Minimum order: 1 each.
• Six Architectural Finishes CRL Roll-In Vinyl

CRL End Caps are available in • Black Vinyl Dresses
six architectural finishes. They can
be secured to the Base Shoe using Up Top Opening
Cladding Tape or Silicone Sealant.
See page R536 for CRL Cladding CRL Roll-In Vinyl finishes off the
Tape, CRL Silicone Sealant, and installation of the glass panels
attachment instructions. in wet glaze pour installations, and also
helps secure the glass in Windscreen
and Smoke Baffle Base Shoe
CAT. NO. FINISH
applications.
B5WECBS Brushed Stainless
B5WECPS Polished Stainless CAT. NO. FOR GLASS SIZE ROLL LENGTH
B5WECPB Polished Brass RG38100 3/8" (10 mm) 100' (30.5 m)
B5WECSB Satin Brass RG38500 3/8" (10 mm) 500' (152.4 m)
B5WECSA Satin Anodized RG12100 1/2" (12 mm) 100' (30.5 m)
B5WECDU Dark Bronze Anodized RG12500 1/2" (12 mm) 500' (152.4 m)
Minimum order: 1 each. Minimum order: 1 roll.
CRL Cap Rail Vinyl

• Centers the Top of the Glass in Smoke
Baffle Base Shoe
• Black Color Vinyl Protects Glass Edge
CRL Cap Rail Vinyl is applied to the edge of the glass before CAT. NO. DESCRIPTION STOCK LENGTH
inserting it into the Smoke Baffle Base Shoe. This centers the glass GR5PV Cap Rail Vinyl for 1/2" (12 mm) Glass 120" (3.05 m)#
and protects the edge while holding mounting grommets in place. Minimum order: 1 each. # Must ship common carrier. Packing charge added to orders of fewer than five lengths.

CRL GRS GLASS RAILING SYSTEM For Pricing on CRL Products, Call Toll Free
GRS Glass Rail System With 3" (76 mm) Top Cap
GRS Glass Rail System With 2" (51 mm) Top Cap EGR Elevated Glass Rail System
GRS Glass Rail System With 2-1/2" (63 mm) Top Cap

CRL GRS GLASS RAILING SYSTEM Contact CRL Tech Sales for complete planning
GRS Glass Rail System With Wall Mount and Glass Mount Brackets and 1.9" (48 mm) Hand Rail
Glass Mount Brackets With 1.9" (48 mm) Hand Rail Glass and Wall Mount Brackets With 1.9" (48 mm) Hand Rail

CRL GRS GLASS RAILING SYSTEM For Pricing on CRL Products, Call Toll Free
GRS Glass Rail System With 2" (51 mm) Top Cap GRS Glass Rail System With 2" (51 mm) Wood Top Cap and 1-1/2" (38 mm) Hand Rail

CRL GRS CAP RAILING SYSTEM Contact CRL Tech Sales for complete planning
CRL Cap Rails

• Premium Cap Rails are Manufactured by
Bump-Forming to Ensure Reduced Spring Back
• Internal Welded Glazing Channel
to Assure Strength
• A Variety of Sizes and Finishes Available to
Accommodate 1/2" (12 mm), 5/8" (16 mm),
and 3/4" (19 mm) Thick Glass
• A Full Line of Accessories
to Complete the Installation
CRL Cap Rails are our latest innovation to set a standard

for quality and cutting edge technical resources. We offer a
Bump-Formed Cap Rail formed around a radius die, ensuring
reduced spring back of the finished rail. The internal glazing
channel is welded on both legs to assure strength. CRL
Bump-Formed Cap Rails are fabricated from 16 or 18 gauge
material, depending on the diameter. CRL Extruded Aluminum
Cap Rails have a standard wall thickness of 1/8" (3.2 mm).
CRL Cap Rails are available in diameters ranging from
1-1/2" to 4" (38.1 to 101.6 mm) in a wide range of available
finishes, as well as accessories to complete the installation.
CRL Custom Fabrication

and Custom Finishing
• Cutting, Mitering, Drilling, Bending,
Welding, Finishing, and Other
Services to Create Just the Right
Product for the Job
CRL offers state-of-the-art custom fabrication that can handle

the most complex projects you may encounter. By offering
cutting, mitering, drilling, bending, welding, finishing, and other
services, CRL can save the installer time and labor.
CRL offers many finishing options, including anodizing,

painting, and powder coating. We operate our own polishing
department that can provide straight and circumferential sanding,
Image
as well as mechanical sanding and polishing.

CRL GRS CAP RAILING SYSTEM For Pricing on CRL Products, Call Toll Free
CRL Premium Cap Rails for 1/2" (12 mm) or 5/8" (16 mm) Glass
• Bump-Formed and Welded 120" (3.05 m) and MANUFACTURED IN THE USA
168" (4.27 m) Stock Lengths are Available in BY C.R. LAURENCE

Six Diameters and Four Architectural Finishes

1-1/2"
• Diameters From 1-1/2" (38.1 mm) to (38.1 mm)
4" (101.6 mm)
• Connects to a Variety of Fabricated Corners
2"
and End Caps (50.8 mm)
• Cut to Size or Custom Fabricated Lengths
Also Available
• For Stainless, Alloy 304 is Standard;
2-1/2"
316 Alloy Available on Special Order (63.5 mm)
• For Brass, Alloy 260 is Standard
CRL’s Premium Cap Rails are manufactured using a

unique process known as Bump-Forming that ensures
accuracy, consistency, and high quality for our customers.
Unlike Roll-Formed Cap Rails, Bump-Formed Cap Rails 3"
do not contain the stress and spring back associated with (76.2 mm)
the roll-formed product. Welds on both sides of the
channel add strength and stability to the Cap Rail. This
results in a Cap Rail with tighter tolerances, consistent
radius, and the ability to fit into welded corners without
twist or discoloration. Put simply, it means this is the best
product in the market place.
All CRL Premium Cap Railings are formed using 3-1/2"

precision tooling to maintain uniform diameters, allowing (88.9 mm)
for smooth hairline transitions at splices, corners, and
end caps. The internal channel is welded in place to
increase strength and stability for fabrication. Use of our
Cat. No. 32629 Metal Contact Cement (see page R667)
is required to achieve a secure and permanent bond at
all connections. Use Connector Sleeves shown on page
R573 to connect Cap Rails. NOTE: When used with
1/2" (12 mm) glass, Cat. No. GR5PV Cap Rail Vinyl (see
page R557) and 95CBL Silicone should be used to secure
4"
the glass. When used with 5/8" (16 mm) glass, secure with (101.6 mm)
95CBL Silicone Sealant (see page R536) and Shims only.
Please contact CRL Technical Sales for more information
or for a quote.

1-1/2" (38.1 MM) DIAMETER PREMIUM CAP RAIL IN 120" (3.05 M) AND 168" (4.27 M) LENGTHS D
CAT. NO. CAT. NO.
120" (3.05 M) 168" (4.27 M) FINISH "W" WIDTH "D" DEPTH* THICKNESS USE SLEEVE NO.
GR15BS GR15BS14 Brushed Stainless 5/8" (15.9 mm) 5/16" (7.9 mm) .050" (1.27 mm) GR15CSS
W
GR15PS GR15PS14 Polished Stainless 5/8" (15.9 mm) 5/16" (7.9 mm) .050" (1.27 mm) GR15CSS
GR15PB GR15PB14 Polished Brass 5/8" (15.9 mm) 5/16" (7.9 mm) .050" (1.27 mm) GR15CSB
GR15SB GR15SB14 Satin Brass 5/8" (15.9 mm) 5/16" (7.9 mm) .050" (1.27 mm) GR15CSB D
Minimum order: 1 each. Sizes and finishes can be combined for quantity pricing. GR15 Series Cap Rail will not accept Cap Rail Vinyl and must be secured using 95CBL silicone and shims.
2" (50.8 MM) DIAMETER PREMIUM CAP RAIL IN 120" (3.05 M) AND 168" (4.27 M) LENGTHS
CAT. NO. CAT. NO.
120" (3.05 M) 168" (4.27 M) FINISH "W" WIDTH "D" DEPTH* THICKNESS USE SLEEVE NO. W
GR20BS GR20BS14 Brushed Stainless 3/4" (19 mm) 3/8" (9.5 mm) .050" (1.27 mm) GR20CSS
GR20PS GR20PS14 Polished Stainless 3/4" (19 mm) 3/8" (9.5 mm) .050" (1.27 mm) GR20CSS
GR20PB GR20PB14 Polished Brass 3/4" (19 mm) 3/8" (9.5 mm) .050" (1.27 mm) GR20CSB D
GR20SB GR20SB14 Satin Brass 3/4" (19 mm) 3/8" (9.5 mm) .050" (1.27 mm) GR20CSB
Minimum order: 1 each. Sizes and finishes can be combined for quantity pricing.
2-1/2" (63.5 MM) DIAMETER PREMIUM CAP RAIL IN 120" (3.05 M) AND 168" (4.27 M) LENGTHS
CAT. NO. CAT. NO.
CAT. NO. CAT. NO.
GR30BS GR30BS14 Brushed Stainless 3/4" (19 mm) 1-3/8" (34.9 mm) .0625" (1.59 mm) GR30CSS
GR30PS GR30PS14 Polished Stainless 3/4" (19 mm) 1-3/8" (34.9 mm) .0625" (1.59 mm) GR30CSS
GR30PB GR30PB14 Polished Brass 3/4" (19 mm) 1-3/8" (34.9 mm) .0625" (1.59 mm) GR30CSB
GR30SB GR30SB14 Satin Brass 3/4" (19 mm) 1-3/8" (34.9 mm) .0625" (1.59 mm) GR30CSB D
CAT. NO. CAT. NO.
GR35PS GR35PS14 Polished Stainless 3/4" (19 mm) 1-7/8" (47.6 mm) .0625" (1.59 mm) GR35CSS W
GR35SB GR35SB14 Satin Brass 3/4" (19 mm) 1-7/8" (47.6 mm) .0625" (1.59 mm) GR35CSB
CAT. NO. CAT. NO. D
*This dimension is used to calculate the glass size. Add the clearance you desire or allow an additional 1/8" (3.2 mm) if using Cap Rail Vinyl (see page R557). W
CRL Premium Cap Rail Accessories for 1/2" (12 mm) or 5/8" (16 mm) Glass
Corners Connector Sleeves End Caps Contact Cement
See pages R560, R562, R566 See page R573 See pages R558 to R559 See page R667

CRL Premium Cap Rails

for 3/4" (19 mm) Glass
BY C.R. LAURENCE
• Bumped-Formed and Welded 120" (3.05 m)

2"
and 168" (4.27 m) Stock Lengths are Available (50.8 mm)
in Three Diameters and Three Architectural
Finishes
2-1/2"
• Connects to Fabricated Corners and End Caps (63.5 mm)
• For Stainless, Alloy 304 is Standard; 316 Alloy
3"
Available on Special Order (76.2 mm)

All CRL Premium Cap Railings are formed using Use Connector Sleeves shown on page R573 to connect Cap Rails. Stainless
precision tooling to maintain uniform diameters, alloy 304 is standard; Stainless alloy 316 is available on special order. For Brass,
allowing for smooth hairline transitions at splices, alloy 260 is standard. Please contact CRL Technical Sales for more information
corners, and end caps. The internal channel is welded or for a quote.
in place to increase strength and stability for fabrication. NOTE: When using GR207, GR257, and GR307 Series Cap Rails, Cat. No.
Use of our Cat. No. 32629 Metal Contact Cement (see GR7PV Cap Rail Vinyl (see page R557) and 95CBL Silicone should be used to
page R667) is required to achieve a secure and secure the glass (see page R536).
permanent bond at all connections.
D
CAT. NO. CAT. NO.
GR207BS GR207BS14 Brushed Stainless 1" (25.4 mm) 3/8" (9.5 mm) .050" (1.27 mm) GR20CSS
GR207PS GR207PS14 Polished Stainless 1" (25.4 mm) 3/8" (9.5 mm) .050" (1.27 mm) GR20CSS
GR207PB GR207PB14 Polished Brass 1" (25.4 mm) 3/8" (9.5 mm) .050" (1.27 mm) GR20CSB W
GR207SB GR207SB14 Satin Brass 1" (25.4 mm) 3/8" (9.5 mm) .050" (1.27 mm) GR20CSB
CAT. NO. CAT. NO.
D
GR257BS GR257BS14 Brushed Stainless 1" (25.4 mm) 7/8" (22.2 mm) .0625" (1.59 mm) GR25CSS
GR257PS GR257PS14 Polished Stainless 1" (25.4 mm) 7/8" (22.2 mm) .0625" (1.59 mm) GR25CSS
GR257PB GR257PB14 Polished Brass 1" (25.4 mm) 7/8" (22.2 mm) .0625" (1.59 mm) GR25CSB
GR257SB GR257SB14 Satin Brass 1" (25.4 mm) 7/8" (22.2 mm) .0625" (1.59 mm) GR25CSB W
CAT. NO. CAT. NO. D
GR307BS GR307BS14 Brushed Stainless 1" (25.4 mm) 1-3/8" (34.9 mm) .0625" (1.59 mm) GR30CSS
GR307PS GR307PS14 Polished Stainless 1" (25.4 mm) 1-3/8" (34.9 mm) .0625" (1.59 mm) GR30CSS
GR307PB GR307PB14 Polished Brass 1" (25.4 mm) 1-3/8" (34.9 mm) .0625" (1.59 mm) GR30CSB
GR307SB GR307SB14 Satin Brass 1" (25.4 mm) 1-3/8" (34.9 mm) .0625" (1.59 mm) GR30CSB
Minimum order: 1 each. Sizes and finishes can be combined for quantity pricing. W
*This dimension is used to calculate the glass size. Add the clearance you desire or allow an additional 1/8" (3.2 mm) if using Cap Rail Vinyl (see page R557).
CRL Premium Cap Rail Accessories for 3/4" (19 mm) Glass
See pages R561, R563, R567 See page R573 See pages R558-R559 See page R667

CRL Extruded Aluminum Cap Rails 1.9"

(48.3 mm)
• Connects to a Variety of Fabricated Corners and End Caps

• Custom Shapes and Sizes are Available
CRL Extruded Aluminum Cap Rails are extruded from alloy 6063-T6, which 2-1/2"
is suitable for custom finishes such as anodizing, powder coating, etc. Use of (63.5 mm)
our 32629 Metal Contact Cement (see page R667) is required to achieve a
secure and permanent bond at all connections. Use Connector Sleeves shown
3"
on page R573 to connect Cap Rails. Please contact CRL Technical Sales for (76.2 mm)
more information or for a quote. 3-1/2" 3"
NOTE: Cat. No. GR5PV Cap Rail Vinyl and 95CBL Silicone should be used (88.9 mm) Mock_Up Only (76.2 mm)
Still Need Photo of
to secure 1/2" (12 mm) glass; Cat. No. 95CBL Silicone and shims should be GR0V4
used to secure 5/8" (16 mm) glass; Cat. No. GR7PV Cap Rail Vinyl and 95CBL 4" x 2-1/2"
Silicone should be used to secure 3/4" (19 mm) glass. (101.6 x 63.5 mm)
Oval
For 1/2" (12 mm) or 5/8" (16 mm) Glass

1.9" (48.3 MM) DIAMETER EXTRUDED ALUMINUM CAP RAIL IN 240" (6.10 M) LENGTHS
CAT. NO. FINISH "W" WIDTH "D" DEPTH* THICKNESS USE SLEEVE NO. D
GR19M Mill Aluminum 3/4" (19 mm) 9/16" (14.3 mm) .125" (3.2 mm) GR19CSM
GR19SA Satin Anodized 3/4" (19 mm) 9/16" (14.3 mm) .125" (3.2 mm) GR19CSM
GR19DU Dark Bronze Anodized 3/4" (19 mm) 9/16" (14.3 mm) .125" (3.2 mm) GR19CSM W
Minimum order: 1 each. Sizes and finishes can be combined for quantity pricing. Must ship common carrier.
2-1/2" (63.5 MM) DIAMETER EXTRUDED ALUMINUM CAP RAIL IN 240" (6.10 M) LENGTHS
GR25M Mill Aluminum 3/4" (19 mm) 1-3/16" (30 mm) .125" (3.2 mm) GR25CSM
GR25SA Satin Anodized 3/4" (19 mm) 1-3/16" (30 mm) .125" (3.2 mm) GR25CSM
GR25DU Dark Bronze Anodized 3/4" (19 mm) 1-3/16" (30 mm) .125" (3.2 mm) GR25CSM W
3" (76.2 MM) DIAMETER EXTRUDED ALUMINUM CAP RAIL IN 240" (6.10 M) LENGTHS
"W" WIDTH
D
CAT. NO. FINISH "D" DEPTH* THICKNESS USE SLEEVE NO.
GR30M Mill Aluminum 3/4" (19 mm) 1-11/16" (43 mm) .125" (3.2 mm) GR30CSM
GR30SA Satin Anodized 3/4" (19 mm) 1-11/16" (43 mm) .125" (3.2 mm) GR30CSM
GR30DU Dark Bronze Anodized 3/4" (19 mm) 1-11/16" (43 mm) .125" (3.2 mm) GR30CSM W
3-1/2" (88.9 MM) DIAMETER EXTRUDED ALUMINUM CAP RAIL IN 240" (6.10 M) LENGTHS
GR35M Mill Aluminum 3/4" (19 mm) 2-3/16" (55.8 mm) .125" (3.2 mm) GR35CSM
GR35SA Satin Anodized 3/4" (19 mm) 2-3/16" (55.8 mm) .125" (3.2 mm) GR35CSM
GR35DU Dark Bronze Anodized 3/4" (19 mm) 2-3/16" (55.8 mm) .125" (3.2 mm) GR35CSM
Minimum order: 1 each. Sizes and finishes can be combined for quantity pricing. Must ship common carrier. W
4" X 2-1/2" (101.6 MM X 63.5 MM) OVAL EXTRUDED ALUMINUM CAP RAIL IN 240" (6.10 M) LENGTHS
CAT. NO. FINISH "W" WIDTH "D" DEPTH* THICKNESS USE SLEEVE NO.
GR0V4M Mill Aluminum 3/4" (19 mm) 1-1/4" (31 mm) .125" (3.2 mm) GR0V4CSM D
GR0V4SA Satin Anodized 3/4" (19 mm) 1-1/4" (31 mm) .125" (3.2 mm) GR0V4CSM
GR0V4DU Dark Bronze Anodized 3/4" (19 mm) 1-1/4" (31 mm) .125" (3.2 mm) GR0V4CSM
For 3/4" (19 mm) Glass

3" (76.2 MM) DIAMETER EXTRUDED ALUMINUM CAP RAIL IN 240" (6.10 M) LENGTHS
D
GR307M Mill Aluminum 1" (25.4 mm) 1-11/16" (31 mm) .125" (3.2 mm) GR30CSM
GR307SA Satin Anodized 1" (25.4 mm) 1-11/16" (31 mm) .125" (3.2 mm) GR30CSM
GR307DU Dark Bronze Anodized 1" (25.4 mm) 1-11/16" (31 mm) .125" (3.2 mm) GR30CSM W

CRL U-Channel Cap

• For 1/2" (12 mm), 5/8" (16 mm), and 3/4" (19 mm) Glass H
• Protects Glass Edge
• Secures Glass Panels Together
W
• Available in Two Architectural Finishes
CRL U-Channel Cap protects the edge of the glass and secures glass
panels together. Standard Stainless Alloy is 304 and material thickness
is 18 gauge. Alloy 316 is available on special order.
NOTE: When used with 1/2" (12 mm) and 3/4" (19 mm) glass, the proper
Cap Rail Vinyl (shown below) and Cat. No. 95CBL Silicone (see page R536)
should be used to secure the glass. When used with 5/8" (16 mm) glass,
secure with 95CBL Silicone and Shims only. These U-Channels are not
designed to be used as a top rail for guard rail applications. MANUFACTURED IN THE USA
BY C.R. LAURENCE
U-CHANNEL CAP
CAT. NO. FINISH "W" WIDTH "H" HEIGHT LENGTH USE WITH
GRUC5BS10 Brushed Stainless 7/8" (22.2 mm) 1-1/2" (38.1 mm) 120" (3.05 m) 1/2" (12 mm) or 5/8" (16 mm) Glass
GRUC5PS10 Polished Stainless 7/8" (22.2 mm) 1-1/2" (38.1 mm) 120" (3.05 m) 1/2" (12 mm) or 5/8" (16 mm) Glass
GRUC7BS10 Brushed Stainless 1-1/8" (28.6 mm) 1-1/2" (38.1 mm) 120" (3.05 m) 3/4" (19 mm) Glass
GRUC7PS10 Polished Stainless 1-1/8" (28.6 mm) 1-1/2" (38.1 mm) 120" (3.05 m) 3/4" (19 mm) Glass
Minimum order: 1 each. Sizes can be combined for quantity pricing. A Packing Charge will be added to orders of fewer than five combined lengths. Must ship common carrier.
CRL Cap Rail Vinyl

• For 1/2" (12 mm) and 3/4" (19 mm) Glass
H
• Rigid Black Vinyl Provides Protective Barrier
Between Metal Cap and Glass
• Helps to Align Glass Panels During Installation W
CRL Cap Rail Vinyl should be used with all CRL Cap Rails and U-Channel
Caps to provide a protective barrier between metal and glass. Cap Rail Vinyl
is useful in temporarily aligning the glass panels until the final installation of
Cap Rail or U-Channel. Use 95CBL Silicone (see page R536) to secure the
Vinyl inside the pocket of the Cap Rail and also to the glass.
CAP RAIL VINYL FOR 1/2" (12 MM) OR 3/4" (19 MM) GLASS
CAT. NO. FITS "W" WIDTH "H" HEIGHT LENGTH USE WITH
GR5PV GR19, GR20, GR25, GR30, GR35, GR40, GR0V4 Series Cap Rails; 1/2" (12 mm) 1-3/16" (30.2 mm) 120" (3.05 m) 1/2" (12 mm) Glass
GRUC5 Series U-Channel Caps
GR7PV GR207, GR257, GR307 Series Cap Rails; 3/4" (19 mm) 1-3/16" (30.2 mm) 120" (3.05 m) 3/4" (19 mm) Glass
GRUC7 Series U-Channel Caps
Minimum order: 1 stock length. Sizes can be combined for quantity pricing. A Packing Charge will be added to orders of fewer than five combined lengths. Stock lengths longer than 108" (2.74 m) must ship common carrier, unless you
specify we cut them for U.P.S. A Cutting Charge will apply.
CRL Tuff-Pak Glass Setting Tape

• Great for Setting 1-1/2" (38.1 mm)
Diameter Cap Rails Onto Glass
• Cork and Rubber Content
Compresses for a Tight Seal
The cork content in CRL Tuff-Pak Glass Setting CAT. NO. THICKNESS WIDTH ROLL LENGTH
Tape makes it compressible, for a strong setting 690 1/32" (0.8 mm) 1-1/2" (38.1 mm) 100' (30.5 m)
that is both a cushion and a tight seal. Tuff-Pak Tuff-Pak
Glass 770 3/64" (1.2 mm) 1-1/2" (38.1 mm) 100' (30.5 m)
has the right proportion of cork and rubber to Setting 720 1/16" (1.6 mm) 1-1/2" (38.1 mm) 100' (30.5 m)
provide an excellent grip on the glass when used Tape 760 5/64" (2.0 mm) 1-1/2" (38.1 mm) 50' (15.2 m)
with our 1-1/2" (38.1 mm) Diameter Cap Rails 820 3/32" (2.4 mm) 1-1/2" (38.1 mm) 50' (15.2 m)
(see pages R554, R575). Minimum order: 1 roll. Sizes can be combined for quantity pricing.

CRL End Caps for Cap Railings MANUFACTURED IN THE USA

BY C.R. LAURENCE
• Six Architectural Finishes Plus Mill Aluminum An ISO9001:2000 Certified Company
• Formed and Shaped to Fit

• Ready to Install
CRL End Caps easily slip into the Cap Railing. Use of our Cat. No. 32629 Metal Contact Cement (see page R667) is required to achieve a
secure and permanent bond. Standard stainless alloy is 304. Stainless alloy 316 is available on special order. For brass, alloy 260 is standard.
Contact CRL Technical Sales for more information or a quote.
FOR 1-1/2" (38.1 MM) DIAMETER CAP RAILING FOR 3-1/2" (88.9 MM) DIAMETER CAP RAILING
CAT. NO. FINISH FITS CAP RAIL NO. CAT. NO. FINISH FITS CAP RAIL NO.
GR15ECBS Brushed Stainless GR15BS GR35ECBS Brushed Stainless GR35BS
GR15ECPS Polished Stainless GR15PS GR35ECPS Polished Stainless GR35PS
GR15ECPB Polished Brass GR15PB GR35ECPB Polished Brass GR35PB
GR15ECSB Satin Brass GR15SB GR35ECSB Satin Brass GR35SB
Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing. GR35ECM Mill Aluminum GR35M
GR35ECSA Satin Anodized GR35SA
GR35ECDU Duranodic Bronze GR35DU
FOR 1.9" (48.3 MM) DIAMETER CAP RAILING
Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing.
CAT. NO. FINISH FITS CAP RAIL NO.
GR19ECM Mill Aluminum GR19M
GR19ECSA Satin Anodized GR19SA FOR 4" (101.6 MM) DIAMETER CAP RAILING
GR19ECDU Duranodic Bronze GR19DU CAT. NO. FINISH FITS CAP RAIL NO.
Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing. GR40ECBS Brushed Stainless GR40BS
GR40ECPS Polished Stainless GR40PS
GR40ECPB Polished Brass GR40PB
FOR 2" (50.8 MM) DIAMETER CAP RAILING
GR40ECSB Satin Brass GR40SB
GR20ECBS Brushed Stainless GR20BS/GR207BS
GR20ECPS Polished Stainless GR20PS/GR207PS
GR20ECPB Polished Brass GR20PB FOR 4" X 2-1/2" (101.6 X 63.5 MM) OVAL CAP RAILING
GR20ECSB Satin Brass GR20SB CAT. NO. FINISH FITS CAP RAIL NO.
Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing. GR0V4ECM Mill Aluminum GR0V4M
GR0V4ECSA Satin Anodized GR0V4SA
GR0V4ECDU Duranodic Bronze GR0V4DU
FOR 2-1/2" (63.5 MM) DIAMETER CAP RAILING
GR25ECPB Polished Brass GR25PB/GR257PB
GR25ECSB Satin Brass GR25SB/GR257SB
FOR 3" (76.2 MM) DIAMETER CAP RAILING

GR30ECPB Polished Brass GR30PB/GR307PB
GR30ECSB Satin Brass GR30SB/GR307SB

CRL Stabilizing End Caps 1/8" (3.2 mm) Clearance at Wall
for Cap Railings 1/2" (12.7 mm) to Edge of Glass
• Formed and Shaped to Fit 1/8"

(3.2 mm)
• Six Architectural Finishes
Plus Mill Aluminum
CRL Stabilizing End Caps easily slip into our Cap Railing. Use of our Cat. No. 32629 Metal
Contact Cement (see page R667) is required to achieve a secure and permanent bond. Standard
stainless alloy is 304. Stainless alloy 316 is available on special order. For brass, alloy 260 is
standard. Includes: 1/4" (6.3 mm) x 2" (50.8 mm) Lag Screw with 1/4" (6.3 mm) spacer. MANUFACTURED IN THE USA
BY C.R. LAURENCE
FOR 1-1/2" (38.1 MM) DIAMETER CAP RAILING FOR 3" (76.2 MM) DIAMETER CAP RAILING
GR15SECBS Brushed Stainless GR15BS GR30SECBS Brushed Stainless GR30BS/GR307BS
GR15SECPS Polished Stainless GR15PS GR30SECPS Polished Stainless GR30PS/GR307PS
GR15SECPB Polished Brass GR15PB GR30SECPB Polished Brass GR30PB/GR307PB
GR15SECSB Satin Brass GR15SB GR30SECSB Satin Brass GR30SB/GR307SB
Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing. GR30SECM Mill Aluminum GR30M
GR30SECSA Satin Anodized GR30SA
GR30SECDU Duranodic Bronze GR30DU
FOR 1.9" (48.3 MM) DIAMETER CAP RAILING Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing.
FOR 3-1/2" (88.9 MM) DIAMETER CAP RAILING
GR19SECM Mill Aluminum GR19M
GR19SECSA Satin Anodized GR19SA
GR19SECDU Duranodic Bronze GR19DU GR35SECBS Brushed Stainless GR35BS
Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing. GR35SECPS Polished Stainless GR35PS
GR35SECPB Polished Brass GR35PB
GR35SECSB Satin Brass GR35SB
FOR 2" (50.8 MM) DIAMETER CAP RAILING GR35SECM Mill Aluminum GR35M
CAT. NO. FINISH FITS CAP RAIL NO. GR35SECSA Satin Anodized GR35SA
GR20SECBS Brushed Stainless GR20BS/GR207BS GR35SECDU Duranodic Bronze GR35DU
GR20SECPS Polished Stainless GR20PS/GR207PS Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing.
GR20SECPB Polished Brass GR20PB
GR20SECSB Satin Brass GR20SB FOR 4" (101.6 MM) DIAMETER CAP RAILING
GR40SECBS Brushed Stainless GR40BS
GR40SECPS Polished Stainless GR40PS
FOR 2-1/2" (63.5 MM) DIAMETER CAP RAILING GR40SECPB Polished Brass GR40PB
CAT. NO. FINISH FITS CAP RAIL NO. GR40SECSB Satin Brass GR40SB
GR25SECBS Brushed Stainless GR25BS/GR257BS Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing.
GR25SECPS Polished Stainless GR25PS/GR257PS
GR25SECPB Polished Brass GR25PB/GR257PB FOR 4" X 2-1/2" (101.6 X 63.5 MM) OVAL CAP RAILING
GR25SECSB Satin Brass GR25SB/GR257SB CAT. NO. FINISH FITS CAP RAIL NO.
GR25SECM Mill Aluminum GR25M GR0V4SECM Mill Aluminum GR0V4M
GR25SECSA Satin Anodized GR25SA GR0V4SECSA Satin Anodized GR0V4SA
GR25SECDU Duranodic Bronze GR25DU GR0V4SECDU Duranodic Bronze GR0V4DU
Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing. Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing.
How Stabilizing End Caps Are Installed: Each Stabilizing End Cap is supplied with a complete set of
installation instructions. Also available online at crlaurence.com.
1. Insert Stabilizing End Cap into 2. Install Anchor Bolt with Nylon 3. Press Cap Rail Assembly over Anchor 4. Secure Cap Rail to glass using
Cap Rail and secure with Metal Spacer at required location on Bolt and prepared glass, and then apply 95CBL Silicone and Shims.
Contact Cement. the substrate. downward force to secure in place.

CRL 90 Degree Horizontal Corners for 1/2" (12 mm)

or 5/8" (16 mm) Glass Cap Railings
BY C.R. LAURENCE
• Welded and Finished

• Four Architectural Finishes Plus Mill Aluminum
• New Oval Corner in Mill Aluminum
• Requires Two Connector Sleeves (Not Included)
Interior slip-fit Horizontal Corners for 1/2" (12 mm) or 5/8" (16 mm)
thick glass allow for hairline joint assemblies with straight lengths of
CRL Cap Rail. Use of our Cat. No. 32629 Metal Contact Cement
(see page R667) is required to achieve a secure and permanent bond.
Two Connector Sleeves are required for use with each corner
(see page R573).
Each Horizontal Corner is fabricated, finished, and individually NOTE: With the exception of the GR15 Series Cap Rail Corners, when used with
packed. All of our stainless and brass corners are fabricated from 1/2" (12 mm) glass, our GR5PV Cap Rail Vinyl (see page R557) and 95CBL Silicone
CRL Premium Cap Rail, and are welded and finished to match. should be used to secure the glass. When using GR15 Series Cap Rail Corners or
5/8" (16 mm) glass, use 95CBL Silicone and shims only to secure the glass.
Our aluminum corners are welded for painted finishes only. Standard
stainless alloy is 304. Stainless alloy 316 is available on special order.
For brass, alloy 260 is standard. Please contact CRL Technical Sales
for more information or a quote.
1-1/2" (38.1 MM) DIAMETER CAP CORNERS 3-1/2" (88.9 MM) DIAMETER CAP CORNERS
CAT. NO. FINISH DIMENSIONS CAT. NO. FINISH DIMENSIONS
GR15HBS Brushed Stainless L=3-3/4" (95.3 mm) GR35HBS Brushed Stainless L=5-1/2" (139.7 mm)
GR15HPS Polished Stainless C=3" (76.2 mm) GR35HPS Polished Stainless C=3-3/4" (95.3 mm)
GR15HPB Polished Brass GR35HPB Polished Brass
GR15HSB Satin Brass GR35HSB Satin Brass
Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing. CAT. NO. FINISH DIMENSIONS
1.9" (48.3 MM) DIAMETER CAP CORNER GR35HM Mill Aluminum L=6" (152.4 mm)
CAT. NO. FINISH DIMENSIONS C=4-1/4" (108 mm)
Mill Aluminum Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing.
GR19HM L=6" (152.4 mm)
C=5-1/16" (128.6 mm) 4" (101.6 MM) DIAMETER CAP CORNERS
GR40HBS Brushed Stainless L=6" (152.4 mm)
2" (50.8 MM) DIAMETER CAP CORNERS GR40HPS C=4" (101.6 mm)
Polished Stainless
CAT. NO. FINISH DIMENSIONS GR40HPB Polished Brass
GR20HBS Brushed Stainless L=4" (101.6 mm) GR40HSB Satin Brass
GR20HPS Polished Stainless C=3" (76.2 mm)
GR20HPB Polished Brass
GR20HSB Satin Brass 4" X 2-1/2" (101.6 X 63.5 MM) OVAL CAP CORNERS
2-1/2" (63.5 MM) DIAMETER CAP CORNERS GR0V4HM Mill Aluminum L=6" (152.4 mm)
CAT. NO. FINISH DIMENSIONS C=4" (101.6 mm)
L=4-1/2" (114.3 mm) Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing.
GR25HBS Brushed Stainless
GR25HPS Polished Stainless C=3-1/4" (82.6 mm)
GR25HPB Polished Brass ONS
GR25HSB Satin Brass Always use proper
Connector Sleeves
CAT. NO. FINISH DIMENSIONS (see page R573).
GR25HM Mill Aluminum L=6" (152.4 mm)
C=4-3/4" (120.7 mm)
3" (76.2 MM) DIAMETER CAP CORNERS

CAT. NO. FINISH DIMENSIONS L
GR30HBS Brushed Stainless L=5" (127 mm)
GR30HPS Polished Stainless C=3-1/2" (88.9 mm) C
GR30HSB Satin Brass
CAT. NO. FINISH DIMENSIONS
GR30HM Mill Aluminum L=6" (152.4 mm)
Di
am
C=4-1/2" (114.3 mm)

et
90 Degrees
er

CRL 90 Degree Horizontal Corners for

3/4" (19 mm) Glass Cap Railings
BY C.R. LAURENCE
• Variety of Architectural Finishes
Interior slip-fit Horizontal Corners for 3/4" (19 mm) thick glass
allow for hairline joint assemblies with straight lengths of CRL
Cap Rail. Use of our Cat. No. 32629 Metal Contact Cement
(see page R667) is required to achieve a secure and permanent
bond. Two Connector Sleeves are required for use with each
corner (see page R573).
Each Horizontal Corner is fabricated, finished, and individually
packed. All of our stainless and brass corners are fabricated from
CRL Premium Cap Rail, and are welded and finished to match.
Standard stainless alloy is 304. Stainless alloy 316 is available on NOTE: Our GR7PV Cap Rail Vinyl (see page R557) and 95CBL
special order. For brass, alloy 260 is standard. Our mill aluminum Silicone (see page R536) should be used to secure the glass.
corners are welded for painted finishes only. For all anodized
finishes please see page R574 for Internal Corner Splices that
create an architecturally pleasing mitered joint. Please contact
CRL Technical Sales for more information or a quote.

Always use proper
Connector Sleeves
GR207HBS Brushed Stainless L=4" (101.6 mm) (see page R573).
GR207HPS Polished Stainless C=3" (76.2 mm)
GR207HSB Satin Brass
2-1/2" (63.5 MM) DIAMETER CAP CORNERS

GR257HBS Brushed Stainless L=4-1/2" (114.3 mm)
GR257HPS Polished Stainless C=3-1/4" (82.6 mm) L
GR257HSB Satin Brass C

GR307HBS Brushed Stainless L=5" (127 mm)
Di
GR307HPS Polished Stainless C=3-1/2" (88.9 mm)

am
et
GR307HPB Polished Brass 90

er
GR307HSB Satin Brass Degrees

GR307HM Mill Aluminum
CRL Premium Formed Cap Rail Accessories

See pages R560 to R572 See page R573 See pages R558 to R559 See page R667

CRL 135 Degree Horizontal Corners for 1/2" (12 mm) MANUFACTURED IN THE USA
or 5/8" (16 mm) Glass Cap Railings BY C.R. LAURENCE

• Welded and Finished

Interior slip-fit Horizontal Corners for 1/2" (12 mm) or 5/8" (16 mm)
thick glass allow for hairline joint assemblies with straight lengths of CRL
Cap Rail. Use of our Cat. No. 32629 Metal Contact Cement (see page
R667) is required to achieve a secure and permanent bond. Two
Connector Sleeves are required for use with each corner (see page R573).
NOTE: With the exception of the GR15 Series Cap Rail Corners, when used with
Each Horizontal Corner is fabricated, finished, and individually packed. 1/2" (12 mm) glass, our GR5PV Cap Rail Vinyl (see page R557) and 95CBL Silicone
All of our stainless and brass corners are fabricated from CRL Premium should be used to secure the glass. When using GR15 Series Cap Rail Corners or
Cap Rail, and are welded and finished to match. Our mill aluminum 5/8" (16 mm) glass, use 95CBL Silicone and shims only to secure the glass.
corners are welded for painted finishes only. Standard stainless alloy
is 304. Stainless alloy 316 is available on special order. For brass, alloy
260 is standard. For all anodized finishes please see page R574 for
Internal Corner Splices that create an architecturally pleasing mitered joint.
Please contact CRL Technical Sales for more information or a quote.
1-1/2" (38.1 MM) DIAMETER CAP CORNERS 3-1/2" (89.9 MM) DIAMETER CAP CORNERS
GR15H3BS Brushed Stainless L=2-1/2" (63.5 mm) GR35H3BS Brushed Stainless L=5-1/2" (139.7 mm)
GR15H3PS Polished Stainless C=2-3/16" (55.6 mm) GR35H3PS Polished Stainless C=4-3/4" (95.3 mm)
GR15H3PB Polished Brass GR35H3PB Polished Brass
GR15H3SB Satin Brass GR35H3SB Satin Brass
GR35H3M Mill Aluminum L=6" (152.4 mm)
1.9" (48.3 MM) DIAMETER CAP CORNERS
C=5-1/4" (133.4 mm)
CAT. NO. FINISH DIMENSIONS Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing.
C=5-9/16" (141.3 mm) 4" (101.6 MM) DIAMETER CAP CORNERS
2" (50.8 MM) DIAMETER CAP CORNERS GR40H3BS Brushed Stainless L=6" (152.4 mm)
GR40H3PS Polished Stainless C=5-3/16" (131.8 mm)
GR40H3PB Polished Brass
GR20H3BS Brushed Stainless L=2-3/4" (69.9 mm)
GR40H3SB Satin Brass
GR20H3SB Satin Brass 4" X 2-1/2" (101.6 X 63.5 MM) OVAL CAP CORNERS
GR0V4H3M Mill Aluminum L=6" (152.4 mm)
2-1/2" (63.5 MM) DIAMETER CAP CORNERS
C=5-3/16" (131.8 mm)
GR25H3BS Brushed Stainless L=3" (76.2 mm)
C=5-1/2 (139.7 mm)
3" (76.2 MM) DIAMETER CAP CORNERS L

GR30H3BS Brushed Stainless L=5" (127 mm) C
GR30H3PB Polished Brass Always use proper
GR30H3SB Satin Brass Connector Sleeves
DIMENSIONS (see page R573).
Diam
CAT. NO. FINISH

eter
C=5-3/8" (136.5 mm)

135
Degrees

CRL 135 Degree Horizontal Corners for

BY C.R. LAURENCE
Interior slip-fit Horizontal Corners for 3/4" (19 mm) thick glass allow
for hairline joint assemblies with straight lengths of CRL Cap Rail.
Use of our Cat. No. 32629 Metal Contact Cement (see page R667)
is required to achieve a secure and permanent bond. Two Connector
Sleeves are required for use with each corner (see page R573).
Each Horizontal Corner is fabricated, finished, and individually
packed. All of our stainless and brass corners are fabricated from CRL
Premium Cap Rail, and are welded and finished to match. Standard
NOTE: Our GR7PV Cap Rail Vinyl (see page R557) and 95CBL
stainless alloy is 304. Stainless alloy 316 is available on special order. Silicone (see page R536) should be used to secure the glass.
For brass, alloy 260 is standard. Our mill aluminum corners are welded
for painted finishes only. For all anodized finishes please see page
R574 for Internal Corner Splices that create an architecturally pleasing
mitered joint. Please contact CRL Technical Sales for more information
or a quote.
GR207H3BS Brushed Stainless L=2-3/4" (69.9 mm)
Always use proper
Connector Sleeves
2-1/2" (63.5 MM) DIAMETER CAP CORNERS (see page R573)
GR257H3BS Brushed Stainless L=3" (76.2 mm)
GR257H3PS Polished Stainless C=2-1/2" (63.5 mm) L
GR257H3SB Satin Brass C

GR307H3BS Brushed Stainless L=5" (127 mm)
Diam

eter

GR307H3SB Satin Brass 135
GR307H3M Mill Aluminum Degrees

See pages R560 to R572 See page R573 See pages R558 to R559 See page R667

CRL Custom Angle Horizontal Corners CRL Custom Angle Horizontal

for 1/2" (12 mm) or 5/8" (16 mm) Corners for 3/4" (19 mm) MANUFACTURED IN THE USA
BY C.R. LAURENCE
Glass Cap Railings Glass Cap Railings

• Five Architectural Finishes Plus Mill Aluminum • Available in Brushed and Polished Stainless
• Requires Two Connector Sleeves (Not Included) • Requires Two Connector Sleeves (Not Included)
• Ready to Install • Ready to Install
CRL Custom Angle Horizontal Corners for 1/2" (12 mm) or 5/8" CRL Custom Angle Horizontal Corners for 3/4" (19 mm) Glass
(16 mm) Glass Cap Railing can be manufactured to almost any Cap Railing can be manufactured to almost any angle the
angle the customer requires. Lengths typically match our other customer requires. Lengths typically match our other corners,
corners, but they can be ordered in custom lengths as well. but they can be ordered in custom lengths as well.
CAT. NO. INFORMATION REQUIRED TO FABRICATE CAT. NO. INFORMATION REQUIRED TO FABRICATE
GR0HC Use Custom Corner Order Form (see page R565) GR07HC Use Custom Corner Order Form (see page R565)
CRL Long Length Custom Horizontal CRL Long Length Custom Horizontal
Corners for 1/2" (12 mm) or 5/8" Corners for 3/4" (19 mm) Glass
(16 mm) Glass Cap Railings Cap Railings
• Five Architectural Finishes Plus Mill Aluminum • Available in Brushed and Polished Stainless
• Requires Two Connector Sleeves (Not Included) • Requires Two Connector Sleeves (Not Included)
CRL Long Length Custom Horizontal Corners for 1/2" (12 mm) or CRL Long Length Custom Horizontal Corners for 3/4" (19 mm)
5/8" (16 mm) Glass Cap Railing can be manufactured to almost any Glass Cap Railing can be manufactured to almost any angle and
angle and leg lengths the customer requires. Maximum leg lengths leg lengths the customer requires. Maximum leg lengths are
are 118" (3 m) x 42" (1.07 m). 118" (3 m) x 42" (1.07 m).
GR0HLC Use Custom Corner Order Form (see page R565) GR07HLC Use Custom Corner Order Form (see page R565)

Date:____________Company Name:__________________________________Your Name:____________________________________
Phone #:_________________________ P.O. # (If Ordering):_______________Project Name:__________________________________
Quantity:_________Cap Rail Size:______________Finish:_______________________________ Glass Thickness: ___________
For pricing or ordering assistance contact CRL Technical Sales at (800) 421-6144 in the U.S., (877) 421-6144 from Canada, or (323) 588-1281
International. Ask for Extension 7730. You may also fax this form to CRL Technical Sales at (800) 587-7501 in the U.S., or (323) 584-5289
(Canada or International).
Horizontal Custom Corner Order Sheet

L1 Glass
Plan View of Cap Rail With
Long Point Dimensions
Specify Inches or Millimeters
Long Point of Cap Rail L1=
L2
A Inside Angle A=
Glass
Notes:
C1 Glass Plan View of Center Line

Glass Dimensions

Center of Line of Glass C1=
C2
Center of Line of Glass C2=
A
Inside Angle A=
Glass
Notes:

CRL 90 Degree Vertical Corners for 1/2"

(12 mm) or 5/8" (16 mm) Glass Cap Railings
Interior slip-fit Vertical Corners for 1/2" (12 mm) or 5/8" (16 mm) thick glass allow for
hairline joint assemblies with straight lengths of CRL Cap Rail. Use of our Cat. No. 32629
Metal Contact Cement (see page R667) is required to achieve a secure and permanent
bond. Two Connector Sleeves are required for use with each corner (see page R573). MANUFACTURED IN THE USA
BY C.R. LAURENCE
Each Vertical Corner is fabricated, finished, and individually packed. All of our
stainless and brass corners are fabricated from CRL Premium Cap Rail, and are welded
and finished to match. Our mill aluminum corners are welded for painted finishes only. NOTE: With the exception of the GR15 Series Cap Rail
Corners, when used with 1/2" (12 mm) glass, our GR5PV
Standard stainless alloy is 304. Stainless alloy 316 is available on special order. For Cap Rail Vinyl (see page R557) and 95CBL Silicone should
brass, alloy 260 is standard. For all anodized finishes please see page R574 for Internal be used to secure the glass. When using GR15 Series Cap
Corner Splices that create an architecturally pleasing mitered joint. Please contact Rail Corners or 5/8" (16 mm) glass, use 95CBL Silicone
and shims only to secure the glass.
CRL Technical Sales for more information or a quote.
1-1/2" (38.1 MM) DIAMETER CORNERS 3-1/2" (88.9 MM) DIAMETER CORNERS
GR15VBS Brushed Stainless L=3-3/4" (95.3 mm) GR35VBS Brushed Stainless L=5-1/2" (139.7 mm)
GR15VPS Polished Stainless D=5/16" (7.9 mm)* GR35VPS Polished Stainless D=1-7/8" (47.6 mm)*
GR15VPB Polished Brass GR35VPB Polished Brass
GR15VSB Satin Brass GR35VSB Satin Brass
GR35VM Mill Aluminum L=6" (152.4 mm)
1.9" (48.3 MM) DIAMETER CORNER D=2-3/16" (55.6 mm)*
D=9/16" (14.3 mm)* 4" (101.6 MM) DIAMETER CORNERS
GR40VBS Brushed Stainless L=6" (152.4 mm)
2" (50.8 MM) DIAMETER CORNERS GR40VPS Polished Stainless D=2-3/8" (60.3 mm)*
CAT. NO. FINISH DIMENSIONS GR40VPB Polished Brass
GR20VBS Brushed Stainless L=4" (101.6 mm) GR40VSB Satin Brass
GR20VPS Polished Stainless D=3/8" (9.5 mm)* Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing.
GR20VPB Polished Brass
4" X 2-1/2" (101.6 X 63.5 MM) OVAL CORNERS
GR20VSB Satin Brass
GR0V4VM Mill Aluminum L=6" (152.4 mm)
2-1/2" (63.5 MM) DIAMETER CORNERS D=1-1/8" (28.6 mm)*
GR25VBS Brushed Stainless L=4-1/2" (114.3 mm)
GR25VPS Polished Stainless D=7/8" (22.2 mm)* * This dimension is used to
GR25VPB Polished Brass calculate the glass size. Add the D
GR25VSB Satin Brass clearance you desire or add an
additional 1/8" (3.2 mm) if using
Cap Rail Vinyl (see page R557).
D=1-1/8" (28.6 mm)*
L
Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing. Always use proper
Connector Sleeves
3" (76.2 MM) DIAMETER CORNERS (see page R573).
GR30VBS Brushed Stainless L=5" (127 mm)
GR30VPS Polished Stainless D=1-3/8" (34.9 mm)* Diameter
GR30VSB Satin Brass D
D=1-11/16" (42.9 mm)*

CRL 90 Degree Vertical Corners for

Interior slip-fit Vertical Corners for 3/4" (19 mm) thick glass allow
for hairline joint assemblies with straight lengths of CRL Cap Rail.
Use of our Cat. No. 32629 Metal Contact Cement (see page R667)
is required to achieve a secure and permanent bond. Two
Connector Sleeves are required for use with each Corner
(see page R573).
Each Vertical Corner is fabricated, finished, and individually MANUFACTURED IN THE USA
BY C.R. LAURENCE
packed. All of our stainless and brass corners are fabricated from An ISO9001:2000 Certified Company
CRL Premium Cap Rail, and are welded and finished to match.
Standard stainless alloy is 304. Stainless alloy 316 is available NOTE: Our GR7PV Cap Rail Vinyl (see page R557) and 95CBL
Silicone (see page R536) should be used to secure the glass.
on special order. For brass, alloy 260 is standard. Our mill
aluminum corners are welded for painted finishes only. For all
anodized finishes please see page R574 for Internal Corner Splices
that create an architecturally pleasing mitered joint. Please Diameter
contact CRL Technical Sales for more information or a quote. D
D
2" (50.8 MM) DIAMETER CORNERS
GR207VBS Brushed Stainless L=4" (101.6 mm) L
GR207VPS Polished Stainless D=3/8" (9.5 mm)*
GR207VSB Satin Brass
2-1/2" (63.5 MM) DIAMETER CORNERS

GR257VBS Brushed Stainless L=4-1/2" (114.3 mm)
Always use proper
GR257VPS Polished Stainless D=7/8" (22.2 mm)* Connector Sleeves
GR257VPB Polished Brass (see page R573).
3" (76.2 MM) DIAMETER CORNERS

GR307VBS Brushed Stainless L=5" (127 mm)
GR307VPS Polished Stainless D=1-3/8" (34.9 mm)*
GR307VM Mill Aluminum L=5" (127 mm)
D=1-11/16" (43 mm)*
* This dimension is used to calculate the glass size and add the clearance you desire.

See pages R560-R572 See page R573 See pages R558-R559 See page R667

CRL Upper Incline Corners for 1/2" (12 mm) Rail

Diameter

BY C.R. LAURENCE
• Four Standard Angles for the Top of a Stair or Ramp Railing Incline D*
• Brushed or Polished Stainless Finishes in Six Diameters
Interior slip-fit Upper Incline Corners for 1/2" (12 mm) or 5/8" (16 mm) thick glass allow for hairline joint
assemblies with straight lengths of CRL Cap Rail. Use our Cat. No. 32629 Metal Contact Cement (see page
R667) to achieve a secure and permanent bond. Two Connector Sleeves are required for the use of each
Each Incline Corner is fabricated, finished, and individually packed. All of our corners are fabricated from
CRL Premium Cap Rail, and are welded and finished to match. Standard stainless alloy is 304. Stainless * This dimension is used to
alloy 316 is available on special order. Please contact CRL Technical Sales for more information or a quote. calculate the glass size. Add the
clearance you desire or add an
NOTE: When used with 1/2" (12 mm) glass, our GR5PV Cap Rail Vinyl (see page R557) and 95CBL Silicone should be used to secure additional 1/8" (3.2 mm) if using
the glass. When used with 5/8" (16 mm) glass, secure with 95CBL Silicone (see page R536) and shims. Cap Rail Vinyl (see page R557).
4 Degree Upper 29 Degree Upper

Incline Corners Incline Corners
NOTE: Leg Length = 6" (152.4 mm) NOTE: Leg Length = 6" (152.4 mm)
BRUSHED POLISHED RAIL BRUSHED POLISHED RAIL

CAT. NO. CAT. NO. "D" * DIAMETER CAT. NO. CAT. NO. "D" * DIAMETER
GR15U4BS GR15U4PS 5/16" (7.9 mm) 1-1/2" (38.1 mm) GR15U29BS GR15U29PS 5/16" (7.9 mm) 1-1/2" (38.1 mm)
GR20U4BS GR20U4PS 3/8" (9.5 mm) 2" (50.8 mm) GR20U29BS GR20U29PS 3/8" (9.5 mm) 2" (50.8 mm)
GR30U4BS GR30U4PS 1-3/8" (34.9 mm) 3" (76.2 mm) GR30U29BS GR30U29PS 1-3/8" (34.9 mm) 3" (76.2 mm)
GR35U4BS GR35U4PS 1-7/8" (47.6 mm) 3-1/2" (88.9 mm) GR35U29BS GR35U29PS 1-7/8" (47.6 mm) 3-1/2" (88.9 mm)
32 Degree Upper 35 Degree Upper


GR20U32BS GR20U32PS 3/8" (9.5 mm) 2" (50.8 mm) GR20U35BS GR20U35PS 3/8" (9.5 mm) 2" (50.8 mm)
GR35U32BS GR35U32PS 1-7/8" (47.6 mm) 3-1/2" (88.9 mm) GR35U35BS GR35U35PS 1-7/8" (47.6 mm) 3-1/2" (88.9 mm)

CRL Lower Incline Corners for 1/2" (12 mm) Rail

Diameter

BY C.R. LAURENCE
• Four Standard Angles for the Bottom of a Stair or Ramp Railing Incline D*
• Brushed or Polished Stainless Finishes in Six Diameters
Interior slip-fit Lower Incline Corners for 1/2" (12 mm) or 5/8" (16 mm) thick glass allow for hairline joint
assemblies with straight lengths of CRL Cap Rail. Use our Cat. No. 32629 Metal Contact Cement (see page
R667) to achieve a secure and permanent bond. Two Connector Sleeves are required for the use of each
Each Incline Corner is fabricated, finished, and individually packed. All of our corners are fabricated from
CRL Premium Cap Rail, and are welded and finished to match. Standard stainless alloy is 304. Stainless
* This dimension is used to
alloy 316 is available on special order. Please contact CRL Technical Sales for more information or a quote. calculate the glass size. Add the
clearance you desire or add an
NOTE: When used with 1/2" (12 mm) glass, our GR5PV Cap Rail Vinyl (see page R557) and 95CBL Silicone should be used to additional 1/8" (3.2 mm) if using
secure the glass. When used with 5/8" (16 mm) glass, secure with 95CBL Silicone (see page R536) and shims. Cap Rail Vinyl (see page R557).
4 Degree Lower 29 Degree Lower


GR15L4BS GR15L4PS 5/16" (7.9 mm) 1-1/2" (38.1 mm) GR15L29BS GR15L29PS 5/16" (7.9 mm) 1-1/2" (38.1 mm)
GR20L4BS GR20L4PS 3/8" (9.5 mm) 2" (50.8 mm) GR20L29BS GR20L29PS 3/8" (9.5 mm) 2" (50.8 mm)
GR30L4BS GR30L4PS 1-3/8" (34.9 mm) 3" (76.2 mm) GR30L29BS GR30L29PS 1-3/8" (34.9 mm) 3" (76.2 mm)
GR35L4BS GR35L4PS 1-7/8" (47.6 mm) 3-1/2" (88.9 mm) GR35L29BS GR35L29PS 1-7/8" (47.6 mm) 3-1/2" (88.9 mm)
32 Degree Lower 35 Degree Lower


GR20L32BS GR20L32PS 3/8" (9.5 mm) 2" (50.8 mm) GR20L35BS GR20L35PS 3/8" (9.5 mm) 2" (50.8 mm)
GR35L32BS GR35L32PS 1-7/8" (47.6 mm) 3-1/2" (88.9 mm) GR35L35BS GR35L35PS 1-7/8" (47.6 mm) 3-1/2" (88.9 mm)

CRL Custom Angle Vertical Corners CRL Custom Angle Vertical

for 1/2" (12 mm) or 5/8" (16 mm) Corners for 3/4" (19 mm) MANUFACTURED IN THE USA
BY C.R. LAURENCE
Glass Cap Railings Glass Cap Railings

• Five Architectural Finishes • Available in Brushed
Plus Mill Aluminum and Polished Stainless
• Requires Two Connector Sleeves • Requires Two Connector Sleeves
(Not Included) (Not Included)
CRL Custom Angle Vertical Corners for 1/2" (12 mm) or 5/8" CRL Custom Angle Vertical Corners for 3/4" (19 mm) Glass Cap
(16 mm) Glass Cap Railing can be manufactured to almost any angle Railing can be manufactured to almost any angle the customer
the customer requires. Lengths typically match our other corners, but requires. Lengths typically match our other corners, but they can be
they can be ordered in custom lengths as well. ordered in custom lengths as well.
GR0VC Use Custom Corner Order Form (see page R572) GR07VC Use Custom Corner Order Form (see page R572)
CRL Custom Reverse Angle Vertical CRL Custom Reverse Angle Vertical
Corners for 1/2" (12 mm) or 5/8" Corners for 3/4" (19 mm) Glass
(16 mm) Glass Cap Railings Cap Railings
• Five Architectural Finishes • Available in Brushed
Plus Mill Aluminum and Polished Stainless
• Requires Two Connector • Requires Two Connector
Sleeves (Not Included) Sleeves (Not Included)
CRL Custom Reverse Angle Vertical Corners for 1/2" (12 mm) or CRL Custom Reverse Angle Vertical Corners for 3/4" (19 mm)
5/8" (16 mm) Glass Cap Railing can be manufactured to almost any Glass Cap Railing can be manufactured to almost any angle the
angle the customer requires. Lengths typically match our other customer requires. Lengths typically match our other corners, but
corners, but they can be ordered in custom lengths as well. they can be ordered in custom lengths as well.
GR0RVC Use Custom Corner Order Form (see page R572) GR07RVC Use Custom Corner Order Form (see page R572)

CRL Custom Compound Angle Vertical CRL Custom Compound Angle Vertical
Corners for 1/2" (12 mm) or 5/8" Corners for 3/4" (19 mm)
(16 mm) Glass Cap Railings Glass Cap Railings MANUFACTURED IN THE USA
BY C.R. LAURENCE

• Five Architectural • Available in Brushed
Finishes Plus and Polished Stainless
Mill Aluminum • Requires Two Connector
Sleeves (Not Included)
CRL Custom Compound Angle Vertical Corners for 1/2" (12 mm) CRL Custom Compound Angle Vertical Corners for 3/4" (19 mm)
or 5/8" (16 mm) Glass Cap Railing can be manufactured to almost Glass Cap Railing can be manufactured to almost any angle the
any angle the customer requires. Lengths typically match our other customer requires. Lengths typically match our other corners, but
corners, but they can be ordered in custom lengths as well. they can be ordered in custom lengths as well.
GR0CVC Use Custom Corner Order Form (see page R572) GR07CVC Use Custom Corner Order Form (see page R572)
CRL Long Length Custom Vertical CRL Long Length Custom Vertical
Corners for 1/2" (12 mm) or 5/8" Corners for 3/4" (19 mm)
(16 mm) Glass Cap Railings Glass Cap Railings

• Five Architectural • Available in Brushed
Finishes Plus and Polished Stainless
Mill Aluminum • Requires Two Connector
• Requires Two Sleeves (Not Included)
Connector Sleeves
(Not Included)
CRL Long Length Custom Vertical Corners for 1/2" (12 mm) or 5/8" CRL Long Length Custom Vertical Corners for 3/4" (19 mm)
(16 mm) Glass Cap Railing can be manufactured to almost any angle Glass Cap Railing can be manufactured to almost any angle and
and leg lengths the customer requires. Maximum leg lengths are leg lengths the customer requires. Maximum leg lengths are
118" x 42" (3 x 1.07 m). 118" x 42" (3 x 1.07 m).
GR0VLC Use Custom Corner Order Form (see page R572) GR07VLC Use Custom Corner Order Form (see page R572)

Date:____________Company Name:__________________________________Your Name:____________________________________
Phone #:_________________________ P.O. # (If Ordering):_______________Project Name:__________________________________
Quantity:_________ Cap Rail Size:______________Finish:_______________________________ Glass Thickness:_________________
For pricing or ordering assistance contact CRL Technical Sales at (800) 421-6144 in the U.S., (877) 421-6144 from Canada, or (323) 588-1281
International. Ask for Extension 7730. You may also fax this form to CRL Technical Sales at (800) 587-7501 in the U.S., or (323) 584-5289
(Canada or International). NOTE: A final sign off is required prior to any custom fabrication.
Vertical Custom Corner Order Sheet

L1 Top Edge of Glass Elevation of Cap Rail With
Long Point Dimensions
L2
A
Inside Angle A=
Notes:
E1
1/8" (3.2 mm) standard
allowed for use with Elevation of Cap Rail With
GR5PV Cap Rail Vinyl
Edge of Glass Dimensions
S1
End of Glass to End of Cap Rail E1=
E2
End of Glass to End of Cap Rail E2=
A
Shim Space S1=
S2 Shim Space S2=
1/8" (3.2 mm)

standard Vertical Edge
of Glass Inside Angle A=
allowed
for use with
GR5PV Cap
Rail Vinyl Notes:

CRL Connector Sleeves for Cap Railings, MANUFACTURED IN THE USA
Cap Rail Corners, and Hand Railings

BY C.R. LAURENCE
• Formed, Shaped to Fit, and Ready to Install

• Provide Proper Alignment at Splices
CRL Connector Sleeves are used to connect and provide
proper alignment between railing splices and railing-to-corner
splices. Connector Sleeves are 5" (127 mm) long, and must be
compressed to fit inside the Cap Railing. Use of our Cat. No.
32629 Metal Contact Cement (see page R667) is required to
achieve a secure and permanent bond.
FOR 1-1/2" (38.1 MM) ROUND RAILING

CAT. NO. MATERIAL 1-1/2" (38.1 MM) FOR USE WITH IMPORTANT INSTALLATION NOTE:
GR15CSS Stainless Steel GR15BS/GR15PS Cap Rails and all 1-1/2" (38.1 mm) Stainless Steel Cap Rail Corners. Always use Connector Sleeves made of
HR15BS/HR15PS 1-1/2" (38.1 mm) Stainless Steel Hand Rails. the same metal as the Cap Rail, Cap Rail
GR15CSB Brass GR15PB/GR15SB Cap Rails and all 1-1/2" (38.1 mm) Brass Cap Rail Corners. Corner, or Hand Rail metal to be joined.
HR15PB/HR15SB 1-1/2" (38.1 mm) Brass Hand Rails.
FOR 1.9" (48.3 MM) ROUND RAILING

CAT. NO. MATERIAL 1.9" (48.3 MM) FOR USE WITH
GR19CSM Mill Aluminum GR19M/GR19SA/GR19DU Cap Rails and all 1.9" (48.3 mm) Aluminum Cap Rail Corners.
HR19M/HR19SA/HR19DU 1.9" (48.3 mm) Aluminum Hand Rails.
FOR 2" (50.8 MM) ROUND RAILING

CAT. NO. MATERIAL 2" (50.8 MM) FOR USE WITH
GR20CSS Stainless Steel GR20BS/GR20PS/GR207BS/GR207PS Cap Rails and all 2" (50.8 mm) Stainless Steel
Cap Rail Corners. HR20BS/HR20PS 2" (50.8 mm) Stainless Steel Hand Rails.
GR20CSB Brass GR20PB/GR20SB Cap Rails and all 2" (50.8 mm) Brass Cap Rail Corners.
HR20PB/HR20SB 2" (50.8 mm) Brass Hand Rails. Stainless Steel

CAT. NO. MATERIAL 2-1/2" (63.5 MM) FOR USE WITH
GR25CSS Stainless Steel GR25BS/GR25PS/GR257BS/GR257PS Cap Rails and all 2-1/2" (63.5 mm) Stainless Steel
Cap Rail Corners.
GR25CSB Brass GR25PB/GR25SB/GR257PB/GR257SB Cap Rails and all 2-1/2" (63.5 mm) Brass Cap Rail
Corners.
GR25CSM Mill Aluminum GR25M/GR25SA/GR25DU Cap Rails and all 2-1/2" (63.5 mm) Aluminum Cap Rail Corners.

GR30CSS Stainless Steel GR30BS/GR30PS/GR307BS/GR307PS Cap Rails and all 3" (76.2 mm) Stainless Steel Brass
Cap Rail Corners.
GR30CSB Brass GR30PB/GR30SB/GR307PB/GR307SB Cap Rails and all 3" (76.2 mm) Brass Cap Rail
Corners.
GR30CSM Mill Aluminum GR30M/GR30SA/GR30DU Cap Rails and all 3" (76.2 mm) Aluminum Cap Rail Corners.

GR35CSS Stainless Steel GR35BS/GR35PS Cap Rails and all 3-1/2" (88.9 mm) Stainless Steel Cap Rail Corners.
GR35CSB Brass GR35PB/GR35SB Cap Rails and all 3-1/2" (88.9 mm) Brass Cap Rail Corners.
GR35CSM Mill Aluminum GR35M/GR35SA/GR35DU Cap Rails and all 3-1/2" (88.9 mm) Aluminum Cap Rail Corners.
Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing. Mill Aluminum
GR40CSS Stainless Steel GR40BS/GR40PS Cap Rails and all 4" (101.6 mm) Stainless Steel Cap Rail Corners.
FOR 4" X 2-1/2" (101.6 X 63.5 MM) OVAL RAILING

CAT. NO. MATERIAL 4" X 2-1/2" (101.6 X 63.5 MM) OVAL FOR USE WITH
GR0V4CSM Mill Aluminum GR0V4M/GR0V4SA/GR0V4DU Cap Rails and all 4" x 2-1/2" (101.6 x 63.5 mm)
Aluminum Corners.
Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing. Mill Aluminum

CRL 90 Degree Horizontal

Internal Splice Sleeves new MANUFACTURED IN THE USA
BY C.R. LAURENCE
L L
• Provides Proper Alignment for
Extruded Aluminum Top Cap at
Splice Locations
• Custom Angles Are Also Available
CRL 90 Degree Horizontal Internal Splice
Sleeves are used to connect and provide proper
CAT. NO. SPLICE SLEEVES FOR "L" LENGTH FOR USE WITH
alignment between our Extruded Aluminum Top
Cap. The Splice Sleeves must be compressed to
1S1990M 1.9" Cap Rail 4" (101.6 mm) GR19M, GR19SA, GR19DU fit inside the Top Cap. Use of our Cat. No. 32629
1S2590M 2-1/2" Cap Rail 4" (101.6 mm) GR25M, GR25SA, GR25DU
1S3090M 4" (101.6 mm)
Metal Contact Cement (See page R667) is
3" Cap Rail GR30M, GR30SA, GR30DU
1S3590M 3-1/2" Cap Rail 5" (127 mm) GR35M, GR35SA, GR30DU required to achieve a secure and permanent
Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing. bond at all connections.
CRL 135 Degree Horizontal new

Internal Splice Sleeves
BY C.R. LAURENCE
L L
Splice Locations
CRL 135 Degree Horizontal Internal Splice
CAT. NO. SPLICE SLEEVES FOR "L" LENGTH FOR USE WITH alignment between our Extruded Aluminum Top
1S19135M 1.9" Cap Rail 4" (101.6 mm) GR19M, GR19SA, GR19DU Cap. The Splice Sleeves must be compressed to
1S25135M 2-1/2" Cap Rail 4" (101.6 mm) GR25M, GR25SA, GR25DU fit inside the Top Cap. Use of our Cat. No. 32629
1S30135M 3" Cap Rail 4" (101.6 mm) GR30M, GR30SA, GR30DU Metal Contact Cement (See page R667) is
1S35135M 3-1/2" Cap Rail 5" (127 mm) GR35M, GR35SA, GR30DU required to achieve a secure and permanent
L
CRL 90 Degree Vertical new
Internal Splice Sleeves MANUFACTURED IN THE USA
BY C.R. LAURENCE
L
Splice Locations
CRL 90 Degree Vertical Internal Splice
CAT. NO. SPLICE SLEEVES FOR "L" LENGTH FOR USE WITH alignment between our Extruded Aluminum Top
1S19V90M 1.9" Cap Rail 4" (101.6 mm) GR19M, GR19SA, GR19DU Cap. The Splice Sleeves must be compressed
1S25V90M 2-1/2" Cap Rail 4" (101.6 mm) GR25M, GR25SA, GR25DU to fit inside the Top Cap. Use of our Cat. No.
1S30V90M 3" Cap Rail 4" (101.6 mm) GR30M, GR30SA, GR30DU 32629 Metal Contact Cement (See page R667)
1S35V90M 3-1/2" Cap Rail 5" (127 mm) GR35M, GR35SA, GR30DU is required to achieve a secure and permanent

CRL Premium Square Cap new

Rails for 1/2" (12 mm) or
5/8" (16 mm) Glass
• 120" (3.05 m) Stock Lengths Available
in Three Sizes and Two Architectural
Finishes
• Compatible With Premium Corners 1-1/2"
(38.1 mm)
• Profiles Range From 1-1/2" (38.1 mm)
to 2-1/2" (63.5 mm) Sizes 2"
(50.8 mm)
• 304 Stainless Alloy is Standard, 316
Alloy Available on Special Order 2-1/2"
(63.5 mm)
All CRL Premium Square Cap Rails are formed using
precision tooling to maintain uniform profiles, allowing for
smooth hairline transitions at splices, corners and end caps.
The internal channel is welded in place to increase strength
and stability for fabrication. Use of our Cat. No. 32629
Metal Contact Cement (See page R667) is required to MANUFACTURED IN THE USA
achieve a secure and permanent bond at all connections.

BY C.R. LAURENCE
D
1-1/2" (38.1 MM) SQUARE PREMIUM CAP RAIL IN 120" (3.05 M) LENGTHS
GRS15BS Brushed Stainless 5/8" (16 mm) 1/2" (12.7 mm) .050" (1.27 mm) GRS15CSS
W
GRS15PS Polished Stainless 5/8" (16 mm) 1/2" (12.7 mm) .050" (1.27 mm) GRS15CSS
NOTE: 1-1/2" (38.1 mm) Square Premium Cap Rail works only with 1/2" (12 mm) glass, secured with 95CBL Silicone and Shims. D
2" (50.8 MM) SQUARE PREMIUM CAP RAIL IN 120" (3.05 M) LENGTHS
GRS20BS Brushed Stainless 3/4" (19 mm) 1/2" (12.7 mm) .050" (1.27 mm) GRS20CSS
GRS20PS Polished Stainless 3/4" (19 mm) 1/2" (12.7 mm) .050" (1.27 mm) GRS20CSS W
D
2-1/2" (63.5 MM) SQUARE PREMIUM CAP RAIL IN 120" (3.05 M) LENGTHS
GRS25BS Brushed Stainless 3/4" (19 mm) 1" (25.4 mm) .0625" (1.59 mm) GRS25CSS
GRS25PS Polished Stainless 3/4" (19 mm) 1" (25.4 mm) .0625" (1.59 mm) GRS25CSS
W
Premium Square Cap Rail Accessories for 1/2" (12 mm) Glass

CRL Square Cap Horizontal Corners Interior slip-fit Horizontal Corners for 1/2" (12 mm) or 5/8"
(16 mm) thick glass allow for hairline joint assemblies with
straight lengths of CRL Square Cap Rail. Use of our Cat. No.
• New Square Profile 32629 Metal Contact Cement (see page R667) is required to
achieve a secure and permanent bond. Two Connector
• Welded and Finished Sleeves are required for use with each corner (see page R577).
• Ready to Install Each Horizontal Corner is fabricated, finished, and
individually packed. All of our stainless corners are fabricated
• Two Finishes Available from CRL Premium Cap Rail, and are welded and finished to
• Requires Two Connector match. Standard stainless alloy is 304. Stainless alloy 316 is
available on special order. Please contact CRL Technical Sales
Sleeves (Not Included) for more information or a quote.
CRL 90 Degree Square Cap Horizontal

Corners for 1/2" (12 mm) or
5/8" (16 mm) Glass
new
1-1/2" (38.1 MM) SQUARE 90 DEGREE CAP CORNERS MANUFACTURED IN THE USA
BY C.R. LAURENCE
GRS15HBS Brushed Stainless L= 3-3/4" (95.3 mm)
GRS15HPS Polished Stainless C= 3" (76.2 mm)
NOTE : With the exception of the GRS15 Series Cap Rail Corners, when used with
1/2" (12 mm) glass, our GR5PV Cap Rail Vinyl (see page R557) and 95CBL Silicone
2" (50.8 MM) SQUARE 90 DEGREE CAP CORNERS should be used to secure the glass. When using GRS15 Series Cap Rail Corners or
CAT. NO. FINISH DIMENSIONS 5/8" (16 mm) glass, use 95CBL Silicone and shims only to secure the glass.
GRS20HBS Brushed Stainless L= 4" (101.6 mm)
GRS20HPS Polished Stainless C= 3" (76.2 mm)
L
2-1/2" (63.5 MM) SQUARE 90 DEGREE CAP CORNERS
C
GRS25HBS Brushed Stainless L= 4-1/2" (114.3 mm)
GRS25HPS Polished Stainless C= 3-1/4" (82.6 mm) Always use proper
Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing. Connector Sleeves
(see page R577). Square 90
Degrees
CRL 135 Degree Square Cap Horizontal

Corners for 1/2" (12 mm) or
5/8" (16 mm) Glass
new
1-1/2" (38.1 MM) SQUARE 135 DEGREE CAP CORNERS MANUFACTURED IN THE USA
BY C.R. LAURENCE
CAT. NO. FINISH DIMENSIONS An ISO9001:2000 Certified Company
GRS15H3BS Brushed Stainless L= 2-1/2" (63.5 mm)

GRS15H3PS Polished Stainless C= 2-3/16" (55.6 mm)
NOTE : With the exception of the GRS15H3 Series Cap Rail Corners, when used with
1/2" (12 mm) glass, our GR5PV Cap Rail Vinyl (see page R557) and 95CBL Silicone
2" (50.8 MM) SQUARE 135 DEGREE CAP CORNERS should be used to secure the glass. When using GRS15H3 Series Cap Rail Corners
or 5/8" (16 mm) glass, use 95CBL Silicone and shims only to secure the glass.
GRS20H3BS Brushed Stainless L= 2-3/4" (69.9 mm)
GRS20H3PS Polished Stainless C= 2-5/16" (58.7 mm) L
C
2-1/2" (63.5 MM) SQUARE 135 DEGREE CAP CORNERS
GRS25H3BS Brushed Stainless L= 3" (76.2 mm)
GRS25H3PS Polished Stainless C= 2-1/2" (63.5 mm) Always use proper Square
Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing. Connector Sleeves
(see page R577). 135
Degrees

CRL Square Cap Connector Sleeves new MANUFACTURED IN THE USA
• Formed, Shaped to Fit, and Ready to Install BY C.R. LAURENCE

• Provide Proper Alignment at Splices IMPORTANT INSTALLATION NOTE:

CRL Square Connector Sleeves are used to connect and Always use Connector Sleeves
provide proper alignment between square railing splices and made of the same metal as the
square railing-to-corner splices. Square Connector Sleeves are Cap Rail, Cap Rail Corner, or
Hand Rail metal to be joined.
5" (127 mm) long, and must be compressed to fit inside the Cap
Railing. Use of Cat. No. 32629 Metal Contact Cement (see page
R667) is required to achieve a secure and permanent bond.
FOR 1-1/2" (38.1 MM) SQUARE CAP RAILING
GRS15CSS Stainless Steel GRS15BS/GRS15PS Cap Rails and all 1-1/2" Square
Stainless Steel Cap Rail Corners
FOR 2" (50.8 MM) SQUARE CAP RAILING
GRS20CSS Stainless Steel GRS20BS/GRS20PS Cap Rails and all 2" Square Stainless
Steel Cap Rail Corners
GRS25CSS Stainless Steel GRS25BS/GRS25PS Cap Rails and all 2-1/2" Square
Stainless Steel Cap Rail Corners
CRL Square End Caps for Cap Railings

• Formed and Shaped to Fit new
CRL Square End Caps easily slip into the Square Cap Railing.
Use of Cat. No. 32629 Metal Contact Cement (see page R667)
is required to achieve a secure and permanent bond. Standard
stainless alloy is 304. Stainless alloy 316 is available on special
order.
GRS15ECBS Brushed Stainless GRS15BS
GRS15ECPS Polished Stainless GRS15PS
FOR 2" (50.8 MM) SQUARE CAP RAILING FOR 2-1/2" (63.5 MM) SQUARE CAP RAILING
GRS20ECBS Brushed Stainless GRS20BS MANUFACTURED IN THE USA
BY C.R. LAURENCE
GRS25ECBS Brushed Stainless GRS25BS
GRS20ECPS Polished Stainless GRS20PS An ISO9001:2000 Certified Company
GRS25ECPS Polished Stainless GRS25PS
CRL Square Stabilizing End Caps 1/8" (3.2 mm)

1/8"
for Cap Railings Clearance at Wall
(3.2 mm)

CRL Square Stabilizing End Caps easily slip
into our Square Cap Railing. Use of Cat. No. 32629
Metal Contact Cement (see page R667) is required
to achieve a secure and permanent bond. Standard 1/2" (12.7 mm)
Wall to Edge FOR 2" (50.8 MM) SQUARE CAP RAILING
stainless alloy is 304. Stainless alloy 316 is available
of Glass CAT. NO. FINISH FITS CAP RAIL NO.
on special order. Includes: 1/4" (6.3 mm) x 2"
(50.8 mm) Lag Screw with 1/4" (6.3 mm) spacer. GRS20SECBS Brushed Stainless GRS20BS
See page R559 for installation instructions. GRS20SECPS Polished Stainless GRS20PS
BY C.R. LAURENCE
FOR 1-1/2" (38.1 MM) SQUARE CAP RAILING An ISO9001:2000 Certified Company FOR 2-1/2" (63.5 MM) SQUARE CAP RAILING
GRS15SECBS
GRS15SECPS
Brushed Stainless
Polished Stainless
GRS15BS
GRS15PS
new GRS25SECBS
GRS25SECPS
Brushed Stainless
Polished Stainless
GRS25BS
GRS25PS

CRL Wood Cap Rails for 1/2"

(12 mm), 5/8" (16 mm) or
3/4" (19 mm) Glass
• 10 Foot (3.05 m) Stock Lengths Available
Walnut
in a Variety of Hardwoods Cherry
Mahogany
• Extruded Aluminum Interior Glass Pocket
• Custom Ordered to Meet Your Specific Needs
• Custom Diameters and Shapes Available
CRL Wood Cap Rails are produced to the customer's
specifications, and can be fully fabricated or shipped in stock White Oak
10 foot (3.05 m) lengths. They are available in many different Red Oak
configurations, sizes, and types of hardwoods. CRL Wood Cap Rails
have an extruded aluminum channel installed, providing a glass Ash
pocket, while adding strength, and preventing the wood from splitting.
Delivery is dependent on availability of the wood and production
time. Maximum 10 foot (3.05 m) lengths are standard; longer lengths
are available on special order and dependent upon wood selected.
All Wood Cap Rails ship unfinished, and are ready to be stained at
the job site. NOTE: 95CBL Silicone (see page R536) and Wedgits
(see page R810) should be used to secure the Wood Cap Rail to Poplar
tempered glass. Maple
7/8" 1-1/8"
(22.2 mm) (28.6 mm)
3/4" 1"
(19 mm) (25.4 mm)
120" (3.05 M) WOOD CAP RAILS FOR 1/2" (12 MM) OR 5/8" (16 MM) GLASS 120" (3.05 M) WOOD CAP RAILS FOR 3/4" (19 MM) GLASS
2" (50.8 MM) 2-1/2" (63.5 MM) 3" (76.2 MM) WOOD 2-1/2" (63.5 MM) 3" (76.2 MM) WOOD
DIAMETER DIAMETER DIAMETER TYPE DIAMETER DIAMETER TYPE
WCR20WL WCR25WL WCR30WL Walnut WCR257WL WCR307WL Walnut
WCR20CR WCR25CR WCR30CR Cherry WCR257CR WCR307CR Cherry
WCR20MG WCR25MG WCR30MG Mahogany WCR257MG WCR307MG Mahogany
WCR20W0 WCR25W0 WCR30W0 White Oak WCR257W0 WCR307W0 White Oak
WCR20R0 WCR25R0 WCR30R0 Red Oak WCR257R0 WCR307R0 Red Oak
WCR20AS WCR25AS WCR30AS Ash WCR257AS WCR307AS Ash
WCR20PL WCR25PL WCR30PL Poplar WCR257PL WCR307PL Poplar
WCR20MP WCR25MP WCR30MP Maple WCR257MP WCR307MP Maple
Minimum order: 1 each. Comes complete with 1" x 1" (25.4 x 25.4 mm) O.D. extruded aluminum channel installed. All Minimum order: 1 each. Comes complete with 1-1/4" x 1-1/4" (31.8 x 31.8 mm) O.D. extruded aluminum channel installed.
Wood Rails are F.O.B. the nearest CRL regional warehouse. All Wood Rails are F.O.B. the nearest CRL regional warehouse.
CRL Wood Biscuits new

• Provides Excellent Hold Power W
• Made From Compressed Cross
Hatched Beechwood
• Installs With Wood Glue H
Use CRL Wood Biscuits when joining Wood Cap Rails and mitered
Wood Hand Rail Corners. Die-cut from beechwood blanks, 1/8" (3.2 mm)
thick Biscuits are compressed for strength and crosshatched for better CAT. NO. "H" HEIGHT "W" WIDTH QTY/CTN
glue bonding. When used with water-based glue (see opposite page), CRLWB1 5/8" (15.9 mm) 1-11/16" (42.9 mm) 25 Biscuits
the biscuit swells within the joint providing excellent holding power. Minimum order: 1 carton.
QTY/ CTN
CRL Wood Flat End Caps

• Available in a Variety of Hardwoods
CRL's Wood Decorative Flat End Caps are cut to size and are
ready to install. Measuring 1/2" (12.7 mm) thick, these end caps
are designed to be glued to the end of CRL's Wood Cap Rails
with wood glue (see below). Custom shapes and sizes are also
available. Contact CRL Technical Sales for more information.
WOOD FLAT END CAPS FOR 1/2" (12 MM), 5/8" (16 MM), OR 3/4" (19 MM) GLASS
2" (50.8 MM) 2-1/2" (63.5 MM) 3" (76.2 MM) WOOD
DIAMETER END CAPS DIAMETER END CAPS DIAMETER END CAPS TYPE
WREC20WL WREC25WL WREC30WL Walnut
WREC20CR WREC25CR WREC30CR Cherry
WREC20MG WREC25MG WREC30MG Mahogany
WREC20W0 WREC25W0 WREC30W0 White Oak
WREC20R0 WREC25R0 WREC30R0 Red Oak
WREC20AS WREC25AS WREC30AS Ash
WREC20PL WREC25PL WREC30PL Poplar
WREC20MP WREC25MP WREC30MP Maple
CRL Wood Dome End Caps

CRL's Wood Decorative Dome End Caps are cut to size and
are ready to install. Measuring 1" (25.4 mm), thick these end caps
are designed to be glued to the end of the CRL's Wood Cap Rails
with wood glue (see below). Custom shapes and sizes are also
available. Contact CRL Technical Sales for more information.
WOOD DOME END CAPS FOR 1/2" (12 MM), 5/8" (16 MM), OR 3/4" (19 MM) GLASS
2" (50.8 MM) 2-1/2" (63.5 MM) 3" (76.2 MM) WOOD
DIAMETER END CAPS DIAMETER END CAPS DIAMETER END CAPS TYPE
WRDC20WL WRDC25WL WRDC30WL Walnut
WRDC20CR WRDC25CR WRDC30CR Cherry
WRDC20MG WRDC25MG WRDC30MG Mahogany
WRDC20W0 WRDC25W0 WRDC30W0 White Oak
WRDC20R0 WRDC25R0 WRDC30R0 Red Oak
WRDC20AS WRDC25AS WRDC30AS Ash
WRDC20PL WRDC25PL WRDC30PL Poplar
WRDC20MP WRDC25MP WRDC30MP Maple
CRL Titebond® III Wood Glue

• Waterproof Formula That Cleans Up With Water
• Designed for Interior and Exterior Applications
• Assembly Time: 10 minutes
• Set Time: 24 Hours
• Clamping Time: 30 Minutes
Use CRL Titebond® III Wood Glue when joining Wood Cap
Rails, mitered Wood Hand Rail Corners, and installing Wood
End Caps. This waterproof, water based formula passes Type
1 water-resistance specifications and conforms to ASTM D- CAT. NO. CONTENTS
4236. Unaffected by finishes this Glue will fully setup within CRLWG1 8 Oz. (236 ml)
24 hours and is designed for interior and exterior applications. Minimum order: 1 each.

A Quote/Order Request Form

C.R. Laurence Co.
Fax Completed Checklist to C.R. Laurence Technical Sales at (800) 587-7501 in the U.S.,
or (323) 584-5289 (Canada and International). Then call to discuss: (800) 421-6144
(U.S.), (877) 421-6144 (Canada), or (323) 588-1281 (International). Ask for Extension
7730. This form is also available online at crlaurence.com
Company Name Phone #

Contact Fax #
Job Name Date
Important: Depending on the complexity of your project, one or Stairway applications will require additional layout information. See
more of the following may be required to accurately order: sketches typical layout drawing on page R583 that needs to be filled out at time
or drawings of your particular application with dimensions; printed of order. NOTE: A final sign off is required prior to any custom
architectural drawings or cad files; photos of the job site conditions fabrication.
(digital images are preferable)
Glass Railing System Checklist Area:

GLASS RAILING STYLE TOP CAP PROFILE
Glass Rail System with Top Cap Round Profile Top Cap
Cap Rail
Glass Rail System with Hand Rail Only Square Profile Top Cap
Glass Rail System with Top Cap and Hand Rail Other (Specify)
TOP CAP SIZE FINISH
1-1/2" (38.1 mm) Brushed Stainless Steel

2" (50.8 mm) Polished Stainless Steel
2-1/2" (63.5 mm) Polished Brass
3" (76.2 mm) Satin Brass
3-1/2" (88.9 mm) Wood (Specify Type)
4" (101.6 mm) Custom Powder Coated Aluminum
Custom (Specify)
GLASS THICKNESS
GLASS RAILING END CAPS
Standard Applied Flat End Caps
3/4" (19 mm) Tempered Glass Stabilizing Wall Mount Flat End Caps
(Glass not supplied by CRL) Welded Flat End Caps
Flat Wood End Caps (Specify Wood Type)
GLAZING METHOD
Dome Wood End Caps (Specify Wood Type)
Dry Glazed with TAPER-LOC™ Other (Specify)
Wet Glazed with Kwixset Expansion Cement
BASE SHOE DRILLING
FLOOR SHIM/DRAIN BLOCKS
Standard Drilling 12" (305 mm) on Center
Drain Blocks 1/2" (12.7 mm) Tall No Drilling Glass Baluster
Weld Blocks (For Steel) 3/8" (9.5 mm) Tall Custom (Specify)
None Required ATTACHMENT/ MOUNTING
PRICE IN STOCK LENGTHS OR FABRICATED Surface Mount (Top of Substrate)
Stock Lengths Embedded in Concrete Mount (Flush Set) Base
Shoe
Fabricated (Cut to Size by CRL) Fascia Mount (Side Mounted)
Other (Specify)
SUBSTRATE
FLOOR CONDITION
Concrete
Steel Flat
Other (Specify) Sloped Degrees
GLASS RAILING HEIGHT
36" (914 mm)

42" (1067 mm)
Other (Specify)

Glass Mounted Hand Rail Checklist:

OPTIONAL HAND RAIL OPTIONAL HAND RAIL GLASS BRACKETS
1-1/2" Diameter .050" Wall Thickness Standard Glass Mounted Hand Rail Brackets
1.66" O.D. 1-1/4" Schedule 40 .140" Wall Thickness 2-Way Adjustable Glass Mounted Hand Rail Brackets
1.9" O.D. 1-1/2" Schedule 40 .145" Wall Thickness 3-Way Adjustable Glass Mounted Hand Rail Brackets
2" Diameter .050" Wall Thickness
Other (Specify)____________________________
None Required
HAND RAIL END CAPS The hand grip

portion of the
Standard Applied Flat End Caps Hand Rails shall
Standard Applied Dome End Caps not be less than
1-1/2" (38.1 mm) 1-1/4" (31.7 mm),
Stabilizing Wall Mount Flat End Caps or 2" (50.8 mm) and no more
Welded Flat End Caps 1-1/2" than 2" (50.8 mm)
(38.1 mm) in cross sectional
Custom Angle End Caps (Specify)______________ dimension
Minimum
FINISH
Brushed Stainless Steel

Polished Stainless Steel
Satin Brass
Polished Brass
Powder Coated Aluminum
Mill Finish Top of Hand Rail shall not be placed
Wood (Specify Type)________________________ less than 34" (863 mm), nor more
than 38" (965 mm), above landings,
Custom (Specify)___________________________ ramps or the toe of step
LAYOUT GRID TO SKETCH DESIGN

Basic Installation Instructions

1. Glass Railing Base Shoe Installation 2. Glass Panel Installation
Layout the Base Shoe stock lengths or pre-fabricated shoe There are two ways of installing the glass panels into the
sections. Attach the Base Shoe to the substrate using the base shoe, CRL's Dry Glazed Method and CRL's Wet Glazed
approved fasteners. Be sure to use the correct mounting Method. For Dry Glazed applications the TAPER-LOC™ System
hardware and ensure that the railing shoe is plumb and level. will self center the glass panels. Simply install the Tapers using
the TLK5 Installation/Removal Tool with the precise pressure to
lock in place. During installation for Wet Glazed applications
remember to plumb and level the glass panels in the
shoe before pouring expansion cement.
3. Top Cap and Hand Rail Installation 4. Complete

Position the Top Cap and Hand Rail stock lengths or With proper care and maintenance the appearance of your
pre-fabricated sections. Install the Top Cap with the supplied vinyl GRS Glass Railing System will last for years.
insert and structural silicone. This will help align the glass panels
during installation. After the Top Cap has been completed, install
the optional glass mounted Hand Rail Brackets along with the
optional Hand Rail, align and position the Hand Rail as required
before mechanically attaching in place.

Practice Methods for Measuring Stairways

When measuring an existing stairway for CRL's Glass Railing System please keep in mind the importance of every measurement that
is needed to produce the required railing system. Measure every dimension that is indicted below to ensure your railing system is
produced correctly. Important: Depending on the complexity of your project, one or more of the following may be required to accurately
order: sketches or drawings of your particular application with dimensions; printed architectural drawings or cad files; photos of the job
site conditions (digital images are preferable).
Field Measure and Specify
Style #1 Each Required Dimension
From the Key Below.
Measuring Curb Mount/Stringer Mount Stairways
A=
C
B=
C=
Top of Curb F D=
Line of E=
Finished Floor
F=
K A
Stair Angle
G=
H=
J
J=
B Top of Curb K=
REQUIRED TOOLS Stair Angle=
TAPE MEASURE Stair Riser G
SQUARE
PLUMB LINE
LASER LEVEL Line of
SKETCH PAD D Finished Floor
Stair Tread H
ANGLE FINDER
Style #2
Measuring Extended Curb Mount/Extended Stringer Mount Stairways
Each Required Dimension
C From the Key Below.
A=
Top of Curb B=
Line of
Finished Floor C=
E=
K Stair Angle
F F=
A
G=
H=
J
J=
B K=
Top of Curb Stair Angle=
Stair Riser G
Line of
Stair Tread H Finished Floor

CRL LED LIGHTING Contact CRL Tech Sales for complete planning
CRL LED Lighting Components

• Ideal for Edge Lighting of Glass Panels
• Illuminates Carved or Sandblasted Images
• Meets NFPA Life Safety Code for Illumination
• 50,000 Hour LED Bulb Life
• Low Voltage - Low Maintenance
• 3 Watts Per Foot
The Benefits of LED Lighting Versus Incandescent/Fluorescent Lights

LED (Light-Emitting Diodes) technology is becoming a major trend in architectural lighting. The advantages of LED lighting over
incandescent/fluorescent lights include the fact that LED's use approximately 5% of the energy of a regular incandescent/fluorescent bulb,
which in turn means lower energy costs. LED's outlast incandescent/fluorescent lamps by a factor of 10. The expected LED life is actually
60,000+ hours. That’s 18 hours a day, every day, for approximately 10 years, which equates to lower maintenance costs.
LED lighting emits very little heat in comparison to incandescent/fluorescent lighting, and no ultraviolet rays. LED's are powered by low
voltage while incandescent/fluorescent lamps are 110V AC, which makes LED's much easier to work with.
CRL LED Strip Lights

• Low Voltage Lighting Available in Five Stock Sizes
• Two Popular Stock Colors: Warm and Cool White
• Custom Colors Also Available on Special Order
CRL LED Strip Lights have 18 LEDs per foot, which are spaced Cool White has a blue hue or appearance, while the Warm White
3/4" (19 mm) on center. Available in stock lengths from 24" to 72" has a more traditional yellow hue. CRL LED Strip Lights work with our
(610 to 1829 mm), they can be cut down every 2" (51 mm) on a Low Voltage Power Supply Boxes (see below). Each LED Strip
pre-marked line, or even soldered together for longer applications. is supplied with 72'' (1829 mm) of wire. They do not come with a plug.
WARM WHITE COOL WHITE

CAT. NO. CAT. NO. STRIP LENGTH
LED24WW LED24CW 24" (610 mm)
Warm White Cool White
CRL Low Voltage LED CRL LED Power Supply

Power Supply • Provides 12V DC Enclosure Box
This Power Supply Enclosure
The Low Voltage LED Power
Box is made of steel and painted
Supply converts 120/240 Volt
gray. The full size hinged door
AC into low voltage DC power.
locks with a quarter turn rotation of
These solid-state units have
the latch. It has plenty of room
special circuitry to provide only
to accommodate either of the
the needed voltage and current
LED Power Supplies shown to
demand required by the LED's,
the left. It prevents tampering
and no more. 25 or 100 Watt
and protects the Power Supply.
models are available to meet
NOTE: For interior use only,
your needs. Height: 10" (254 mm)
waterproof boxes for exterior Width: 8" (203.2 mm)
use are available on special order. Depth: 4" (101.6 mm)
PT2512 25 Watt - 12 Volt DC LED Power Supply CAT. NO. DESCRIPTION
PT10012 100 Watt - 12 Volt DC LED Power Supply EJ1084 LED Power Supply Enclosure Box

CRL LED LIGHTING For Pricing on CRL Products, Call Toll Free
CRL Cap Rail Insert for LED Strip Lights

• Illuminate CRL Cap Rails When
Used in Hand Rail Applications
This CRL Cap Rail Insert for LED Strip Lights
fits into the glass pocket of our Cap Rails, allowing
for installation of LED Strip Lights that illuminate
the area below the Cap Rail. The Insert has multiple Wall Mount Hand Railing Application
LED placement slots for varied lighting effects, comes
with a clear plastic lens cover, and acts as an insulated
wire raceway. LED Strip Lights must be ordered
separately (see previous page).
INSERT WITH LENS COVER

CAT. NO. LENGTH
LEDCR6LC 72" (1829 mm)
Minimum order: 1 each. Post Mount Hand Railing Application
CRL Cap Rail Insert for Glass

Panel Edge Lighting
• For Use With CRL Cap Rails When
Top Lighting Glass Panels
This CRL Cap Rail Insert slips over the 1/2" (12 mm)
glass panel and provides a protected securing channel
for the glass. It also has a slot for the LED Light Strip
and an insulated wire raceway behind the LED Light
Strip. Permanent securing is achieved by applying a
bead of Cat. No. 95CBL Black Silicone (see page R536)
in the pocket on either side of the glass. LED Strip
Lights must be ordered separately (see previous page).
INSERT ONLY
CAT. NO. LENGTH
LEDCR6 72" (1829 mm)
CRL Body Housings for • Available in Round and Square Housings With Clear Lens Cover
LED Strip Lights • Housings Have a Groove to Accept the LED Strip
CRL Body Housings for LED Strip Lights are offered
in both 1" (25 mm) Round or 3/4" (19 mm) Square plastic
extrusions. The 72" (1829 mm) Round Body comes with
four pressure-fit Mounting Clips for easy installation.
The two-piece Square Body has a groove down the middle
to accept self-tapping screws for attachment to the substrate.
Both Housings come with a clear lens cover. Standard 72"
(1829 mm) Housings can easily be cut to size in the field,
and can be used in either a vertical or horizontal application.
LED Strip Lights must be ordered separately (see previous page). 1"
25/32" (25 mm)
CAT. NO. DESCRIPTION LENGTH (20 mm)
LEDSQ6 Square Housing 72" (1829 mm)
LEDRD6 Round Housing 72" (1829 mm)
Minimum order: 1 each. 3/4" (19 mm) 1-11/16" (43 mm)

CRL GRS GATE SYSTEMS Contact CRL Tech Sales for complete planning
CRL GRS Cap Railing

Swinging Gate MANUFACTURED IN THE USA
BY C.R. LAURENCE
• Heavy-Duty Glass Gate With Optional Cap Rail

• Beautiful in Design and Functional in Operation
• Gate Can Be Adjusted In and Out at Both
the Top and the Bottom
• Custom Fabricated to Meet Your
Design Requirements
• Ask About Our New Free-Standing Post Model
We have developed a series of Swinging Gates for commercial or The unit above was mounted to a 4" (101.6 mm) square steel post
residential use, either alone or with our GRS Glass Rail System. set in concrete with machine screws and concealed in the finished
The gates are an offshoot of our Wedge-LockTM Door Rail System, wall. This is important, because the tight clearances used in the
and can be combined with our GRS Cap Rails. The bottom rail can installation require the Gate to be rigidly mounted. Available in either
be widened to match the width of an adjacent fixed railing Base Shoe. Wall Mount or Post Mount models.
The upper patch fitting is modified to allow for mounting to a stainless NOTE: Available by custom order only. Most orders can be
steel bracket, and may also be modified to accommodate a Cap Rail. fabricated in five business days at our Los Angeles, California
The top of the Gate pivots on a heavy-duty ball bearing, while the manufacturing facility. Contact CRL Technical Sales at (800) 421-
bottom pivots on a floor mounted commercial door closer. The floor 6144 in the U.S., (877) 421-6144 from Canada, or (323) 588-1281
closer always returns the Gate to the closed position, and the closing International, and ask for Ext. 7730. You can also send e-mail from
speed is adjustable. the crlaurence.com home page. Click on Contact Us, and then
All Swinging Gates are custom fabricated to your specifications. click on Technical Sales.
These are the most common configurations of
Wall Mounted (Type W#) and Swinging Gates. Find the configuration that best
matches your requirements and then use the handy
Post Mounted (Type P#) Gates menu on the next page to design the Swinging Gate
that's right for you.
TYPES W1/P1 TYPES W2/P2 TYPES W3/P3 TYPES W4/P4

Wall or post mount top pivot, Wall or post mount top pivot, Wall or post mount top pivot, Wall or post mount top pivot, floor
floor closer, cap rail, top patch, floor closer, cap rail, top and floor closer, top patch, and full closer, top and bottom patch.
and full bottom rail. bottom patch. bottom rail.
TYPES W5/P5 TYPES W6/P6 TYPES W7/P7 TYPES W8/P8

Wall or post mount top and Wall or post mount top and Wall or post mount top and Wall or post mount top and bottom
bottom pivots, cap rail, top patch, bottom pivots, cap rail, top and bottom pivots, top patch, and pivots, top and bottom patch.
and full bottom rail. bottom patch. full bottom rail.
NOTE: We recommend the use of 1/2" (12 mm), 5/8" (16 mm), or 3/4" (19 mm) tempered monolithic or tempered laminated glass.

CRL GRS GATE SYSTEMS For Pricing on CRL Products, Call Toll Free
CRL GRS Cap Railing

Swinging Gate MANUFACTURED IN THE USA
BY C.R. LAURENCE
• 16 Configurations to Choose From

• Wall or Post Mounted
• Four Handing Options
• Stainless Steel, Anodized, and
Painted Finishes
• Every Swinging Gate is Custom
Fabricated to Your Requirements
• Optional Locks Available CRL GRS Cap Railing Swinging Gate System With Wood Top Rail
WALL MOUNT SWINGING GATE WITH POST MOUNT SWINGING GATE WITH
CAT. NO. TOP PIVOT PLUS… TYPE CAT. NO. TOP PIVOT PLUS… TYPE
SGW1C Cap Rail, Top Patch, and Full Bottom Rail W1 SGP1C Cap Rail, Top Patch, and Full Bottom Rail P1
SGW2C Cap Rail, Top and Bottom Patch W2 SGP2C Cap Rail, Top and Bottom Patch P2
SGW3C Top Patch and Full Bottom Rail W3 SGP3C Top Patch and Full Bottom Rail P3
SGW4C Top and Bottom Patch W4 SGP4C Top and Bottom Patch P4
CAT. NO. TOP AND BOTTOM PIVOT PLUS… TYPE CAT. NO. TOP AND BOTTOM PIVOT PLUS… TYPE
SGW5C Cap Rail, Top Patch, and Full Bottom Rail W5 SGP5C Cap Rail, Top Patch, and Full Bottom Rail P5
SGW6C Cap Rail, Top and Bottom Patch W6 SGP6C Cap Rail, Top and Bottom Patch P6
SGW7C Top Patch and Full Bottom Rail W7 SGP7C Top Patch and Full Bottom Rail P7
SGW8C Top and Bottom Patch W8 SGP8C Top and Bottom Patch P8
NOTE: We recommend the use of 1/2" (12 mm), 5/8" (16 mm), or 3/4" (19 mm) tempered monolithic or tempered laminated glass.
Use This Menu to Design the Swinging Gate of Your Choice

AVAILABLE CONFIGURATIONS: POST FINISH: BOTTOM RAIL OPTIONS: HANDING:
Wall Mount Post Mount: Brushed Stainless Steel Standard Rail
W1 P1 Polished Stainless Steel 4" (101.6 mm) Tall
W2 P2 Painted (Specify) 6" (152.4 mm) Tall Left Hand (LH)
W3 P3 10" (254 mm) Tall Inside
W4 P4 Modified Rail to
W5 P5 Match Base Shoe Outside
W6 P6 B5S
W7 P7 B7S
W8 P8 Right Hand (RH)
Inside
PATCH/RAIL FINISH: BOTTOM RAIL LOCK OPTIONS:
Brushed Stainless Steel None
POST STYLE AND SIZE: Outside
Polished Stainless Steel Cylinder (outside only)
Round Satin Anodized Cylinder (inside only)
2-1/2" (63.5 mm) Diameter Dark Bronze Cylinder/Thumbturn (outside)
2-7/8" (73 mm) Diameter Left Hand Reverse (LHR)
Painted (Specify) Cylinder/Thumbturn (inside)
3" (76.2 mm) Diameter Inside
4" (101.6 mm) Diameter
Square BRACKET FINISH: GLAZING (by others:)
Outside
2-1/2" x 2-1/2" (63.5 mm) Brushed Stainless Steel 1/2" (12 mm)
3" x 3" (76.2 mm)
Polished Stainless Steel 5/8" (16 mm)
4" x 4" (101.6 mm)
3/4" (19 mm) Right Hand Reverse (RHR)
Inside
FLOOR CLOSER CLOSER ARM AND FLOOR PIVOT
CRL8460 - 90 Degree Hold CRL9040AS Closer Arm Outside
CRL8462 - No Hold CRL8010BP Pivot
Other (Specify) CRL8010DP Pivot
Other Pivot (Specify)

CRL GRS GATE HARDWARE Contact CRL Tech Sales for complete planning
CRL GRS Cap Railing CRL AGT2 Vertical

Swinging Gate Hardware Mount Pivot Bracket
• For Free-Swinging or Floor Mounted • Supports Transom Weight
Door Closer Gates • Right and Left Handed Models
• Steel Brackets Fit Under Top Cap • Available in Brushed and
Polished Stainless
The AGT2 Series Vertical
Mount Pivot Bracket was
designed to accommodate
an 'all-glass' transom. It will
support the weight of the
transom and provide a top
pivoting point for the door.
The Brackets are handed.
Order appropriate handing
for your installation.
NOTE: Must be attached to
Left Hand
a substrate with sufficient Shown
structural integrity for support.
For Information on Complete Gate Systems see pages R586 to R587 CAT. NO. HANDING FINISH
AGT2LBS Left Hand Brushed Stainless
CRL offers a complete line of hardware to complement our AGT2LPS Left Hand Polished Stainless
GRS Cap Railing Swinging Gate Systems. Application assistance AGT2RBS Right Hand Brushed Stainless
AGT2RPS Right Hand Polished Stainless
is available from CRL Technical Sales.
Minimum order: 1 each. Door Pivots can be combined for quantity pricing.
CRL AGT3 Horizontal CRL AGT3 Pivot Bracket new

Mount Pivot Bracket Replacement Pin
• 2-3/4" (70 mm) American • For Use With AGT3
Standard Setback Series Horizontal
• Non-Handed Mount Pivot Brackets
• Available in Brushed and
Polished Stainless
The AGT3 Series Horizontal Mount Pivot Bracket was designed

to accommodate heavy glass gates or doors that don't require the
supporting of any weight above. The measurement from the
backside of the Bracket to the centerline of the pivot point is 2-3/4"
(70 mm) American Standard Setback. Horizontal Mount Brackets
are non-handed. This Replacement Pin for AGT3 Brackets is designed to
NOTE: Must be attached to a substrate with sufficient structural accommodate heavy glass gates or doors that either free swing
integrity for support. or are attached to a floor closer. Minimum order is one each.
CAT. NO. HANDING FINISH
AGT3BS Non-Handed Brushed Stainless
AGT3PS Non-Handed Polished Stainless
Minimum order: 1 each. Door Pivots can be combined for quantity pricing. CAT. NO. AGTP1

CRL GRS GATE HARDWARE For Pricing on CRL Products, Call Toll Free
CRL Glass-to-Glass CRL Wall Mount

Gate Pivot Patch Gate Pivot
This CRL Wall Mount
Gate Pivot is designed for
mounting to a post or wall.
As a safety measure the
bottom of the pivot bar is
raised 3/4" (19 mm) above
the CRL Top Gate Patch
This CRL Glass-to-Glass Gate Pivot Patch is designed to allow Fitting (not included),
for a gate in an 'all-glass' windscreen using either Base Shoe or allowing for adequate
Frameless Windscreen Clamps. It fits in the upper corner of the space to help prevent
fixed glass panel, and requires a hole and glass cut-out in the pinching of fingers.
glass. As a safety measure the bottom of the pivot bar is raised Available in brushed
3/4" (19 mm) above the CRL Top Gate Patch Fitting (not included), stainless steel finish, it
allowing a space that fingers will fit in between to help prevent comes complete with
pinching. Brushed stainless steel finish, complete with instructions instructions and a glass
and a glass cut-out template. Minimum order is one each. cut-out template. Minimum
order is one each.
CAT. NO. GGP12BS CAT. NO. WGP22BS
CRL Top Gate CRL Wall Mount

Patch Fitting Door Pivot
This CRL Wall Mount Door
Pivot is designed for mounting
to a post or wall. The space
between the bottom of the pivot
bar and the CRL Top Door Patch
Fitting (not included) has been
Top View
reduced to 1/8" (3 mm), because
at door height the chance of
pinching fingers is greatly
CRL Top Gate Patch Fittings are used with all three of our gate
reduced. Available in brushed
and door pivots. It fits in the upper corner of the gate’s glass panel,
stainless steel finish, complete
and requires a hole and cut-out in the glass. Available in brushed
with instructions and a glass
stainless steel finish, it comes complete with instructions and a
cut-out template. Minimum
glass cut-out template. Minimum order is one each.
order is one each.
CAT. NO. PH20ABS CAT. NO. WDP32BS
CRL Bottom Gate CRL Floor Mounted

Patch Fitting Free-Swinging Pivot
• 7/8" (22 mm) Flat
Tapered Spindle
• 440 Pound (200 kg)
Capacity
Bottom View
CRL Bottom Gate Patch Fittings are used with our bottom door
pivots or floor closers. It fits in the lower corner of the gate’s glass CRL Floor Mounted Free-Swinging Pivot with 7/8" (22 mm) flat
panel, and requires a hole and cut-out in the glass. Available in tapered type spindle for use with CRL Patch and Gate/Door Rail
brushed stainless steel finish, it comes complete with instructions Systems. Minimum order is one each.
and a glass cut-out template. Minimum order is one each.
CAT. NO. PH10CBS CAT. NO. 1NT402
CRL GRS GATE HARDWARE Contact CRL Tech Sales for complete planning
CRL Jackson 900 Series Heavy-Duty

Floor Mounted Swinging Gate Closers ®
• 1000 Pound (454 kg) Capacity,

54" (1372 mm) Doors
• Multi-Size Spring Power Adjustable
• Interchangeable Spindle Heights
• Levelling and Door Centering Adjustments
• 10 Year Limited Warranty
• UL Listed Interchangeable Spindle System
Adapts to Gate and Floor Clearance Needs
12-1/8" Temperature Stabilizing Fluid
(308 mm) Varies With
Spindle Used with Thermal Sensitive Valves Gives
Automatic Seasonal Adaptability
2-3/8"
1-3/8" to 1-5/8" (60 mm) Visible Bubble Port
(35 to 41 mm) Aids Leveling of Closer
3-1/16"
1-3/4" to 2" (78 mm)
(44 to 51 mm) Multi Spring Size 1-6
SPECIFICATIONS: Adjustment Controls
3° Gate Centering Both Opening and
Maximum Center-Hung Gate: Weight = 1000 lbs. (454 kg), Width = 54” (1372 mm) Adjustment Simplifies Closing Forces
Maximum 3/4" Offset Gate: Weight = 650 lbs. (295 kg), Width = 48” (1219 mm) Double Swing Gate
Maximum 1-1/2" Offset Gate: Weight = 300 lbs. (136 kg), Width = 42” (1067 mm) Alignment
Adjustable Spring Power: Multi-Size 1 - 6
Tapered Roller Bearings Single Valve Adjusts
Gate Centering Adjustment: 6 Degree Range Adjustment to Align Gate Carry Thrust of Spindle with Ease, Closing Speed
Hold or No Hold Open Models: Hold Open at Both 90 Degrees and 120 Degrees, Providing Very Heavy Capacity and
Hold Open at 105 Degrees Only 80% Closing Energy Efficiency
Action: Non-Handed, Double Acting – 180 Degree Swing
This fully adjustable Closer meets A.D.A.* requirements in that it can be set at 5 or 8.5 pound opening forces. The unique centering
adjustment simplifies double gate alignment. This Closer is ideal for GRS Cap Rail Swinging Gates because it will always return the Gate
to the closed position, and the closing speed is adjustable. Packages for new and retrofit installations, as well as accessories for both
Center-Hung and Offset gate applications, are available.
These Closers are available in dual 90 and 120 degree, or 105 degree only Hold Open and No Hold Open models. NOTE: This Closer is
designed to open to a maximum of 180 degrees. An auxiliary floor or overhead stop is required to stop the gate at less than 180 degrees.
Basic Closer Center-Hung

Package Package
CONSISTS OF: CONSISTS OF:
990 Closer Body 990 Closer Body
Cement Case Cement Case
Installation Tool Package J7080 Center-Hung Arm
CRL9040S8 Flat Tapered
Spindle
Installation Tool Package

J990NH0D 180 Degree Swing No Hold Open J990NH0N 180 Degree Swing No Hold Open
J993H0D 180 Degree Swing Hold Open @ 90 Degrees and 120 Degrees J993H0N 180 Degree Swing Hold Open @ 90 Degrees and 120 Degrees
J994H0D 180 Degree Swing Hold Open @ 105 Degrees J994H0N 180 Degree Swing Hold Open @ 105 Degrees
J995BCD 180 Degree Swing No Hold Open – Backcheck @ 85 Degrees J995BCN 180 Degree Swing No Hold Open – Backcheck @ 85 Degrees
Minimum order: 1 each. All Door Closers can be combined for quantity pricing. Minimum order: 1 each. All Door Closers can be combined for quantity pricing.
NOTE: *Closers set to comply with A.D.A. specified opening forces might not provide adequate spring
power to control and close the gate due to varying site conditions and gate size.

CRL GRS GATE HARDWARE For Pricing on CRL Products, Call Toll Free
7/8"
CRL Interchangeable Floor Closer Spindles (22 mm)
• Fits Jackson 900 Series Floor Mounted Door Closers

CRL Flat Tapered and "MAB" Type Spindles are available in various
heights to accommodate different threshold and finished floor heights,
and are intended for use with CRL Jackson 900 Series Floor Mounted
Closers. The CRL Flat Tapered Spindle will allow the use of all center- CRL9040AS
CRL Bottom Floor Closer Arm
hung and offset bottom arms intended for use with this type of spindle, Door Rail Flat Tapered
3/16"
as well as CRL Patch Fitting Inserts. The "MAB" Style Spindle (5 mm) 1/2"
is commonly used throughout Europe and South America. Collar
Gate Clearance (13 mm)
Height
FLAT TAPERED "MAB" TYPE SQUARE Floor
CAT. NO. TAPERED CAT. NO. COLLAR HEIGHT GATE CLEARANCE Closer
CRL9040S3 CRL9050S3 1/8" (3 mm) 5/16" (8 mm)
CRL9040S8 CRL9050S8 5/16" (8 mm) 1/2" (13 mm)
CRL9040S13 CRL9050S13 1/2" (13 mm) 11/16" (17 mm)
CRL9040S18 CRL9050S18 3/4" (19 mm) 15/16" (24 mm)
CRL9040S23 CRL9050S23 7/8" (22 mm) 1-1/16" (27 mm) Gate Clearance Dimension is based on use with CRL
DRS Bottom Rails and Bottom Arms. Clearance may
CRL9040S28 CRL9050S28 1-1/8" (29 mm) 1-5/16" (33 mm) vary when used with other products. Contact "MAB" Type
CRL9040S33 CRL9050S33 1-5/16" (33 mm) 1-1/2" (38 mm) Technical Sales for assistance if needed. Square Tapered
Minimum order: 1 each. All Spindles can be combined for quantity pricing.
CRL Jackson Floor Closer CRL Jackson Center-Hung

Cover Plates Bottom Arms
Arm for Aluminum,
• Fits Jackson 900 Series Steel or Wood Gates
Floor Mounted CAT. NO. J7080
Door Closers Arm for CRL Door
Rail Type Gate
CAT. NO. CRL9040AS
These CRL and Jackson Center-Hung Floor Closer Arms should

These Jackson Floor Closer be used with gates having a minimum 3/4" (19 mm) deep bottom
Cover Plates are for use with door rail. Arms will accommodate most gate types. They can be
CRL Jackson 900 Series Floor used with Jackson 900 Series Floor Closers, as well as any other
CAT. NO. FINISH closer using a 7/8" (22 mm) flat tapered type spindle.
Mounted Door Closers. They
J7020CPBS Brushed Stainless Steel
J7020CPPB Polished Brass are available in four popular CAT. NO. DESCRIPTION
J7020CPPS Polished Stainless Steel finishes, and allow for full J7080 For Aluminum, Steel or Wood Gates
J7020CPDU Dark Bronze closer adjustment without CRL9040AS For CRL Door Rail Type Gates
Minimum order: 1 each. removing the gate. Minimum order: 1 each.
CRL Adjustable Dual-Purpose CRL Free Swinging

Bottom Gate Pivot Set Bottom Gate Pivot
• Dual-Purpose – Mount Directly • Designed to Fit CRL
to Floor or Threshold Wedge-Lock®
Gate Rails
This Pivot Set is designed

to be used with CRL Wedge-
This Pivot can be used with the base plate for floor mounting or Lock® Gate Rail Systems.
attached directly to the threshold. A 3/16" (5 mm) height adjustment is Minimum order is one each.
possible with the gate on or off the pivot. Minimum order is one each. Maximum Weight Capacity:
Maximum Weight Capacity: 200 pounds (90 kg) 200 pounds (90 kg)
CAT. NO. CRL8010DP CAT. NO. CRL8010BP

CRL GATE HARDWARE Contact CRL Tech Sales for complete planning
CRL Glass Mounted

Latch With Lock and 6-7/8"
(174 mm)
Thumbturn INCLUDES: Stamped Body with Lock Mechanism
(Keyed Outside, Thumbturn Inside); Strike; Cover
• Works on Single or 2-7/8"
Plates; Washers; Gaskets for 3/8" (10 mm) to 1/2"
(73 mm)
Double Gates (12 mm) Glass; Three Keys. Handles Not Included
(Must be Ordered Separately).
SINGLE
For Use With: PTH314 Series Latch Keeper;
DOUBLE GATES
GATE
PTH302/303/306 Series Lever Handles.
Glass Fabrication Required:
PTH311 PTH311 PTH314
Two 1-3/4" (45 mm) Holes (Template Included).
Lever Handles Not Included
(See next page) CAT. NO. FINISH
PTH311A Clear Anodized
PTH311BR Polished Brass
When used with a PTH314 Glass Mounted Latch Keeper on an inswing gate, an Extended
PTH311BS Brushed Stainless
Length EC3 Series Keyed Cylinder Lock/Thumbturn (see next page) is required to have the PTH311PS Polished Stainless
thicker housing on the outside as required. Not included, must be ordered separately. Minimum order: 1 each. All finishes can be combined for quantity pricing.
CRL Locking Latch Mechanism 6" (152.4 mm)
• Works With PTH311 Series Lever Latches

• Reversible to Meet All Applications
2-3/8"
The PTH300L Latch Mechanism is a replacement latch for the (60.3 mm)
PTH311 Glass Mounted Latch shown above. It is reversible for
both handle lifting springs and latch bolt configuration.
CAT. NO. HANDING
PTH300L Reversible
CRL Glass Mounted INCLUDES: Stamped Body with Latch Mechanism;
Passage Latch 6-7/8"

(174 mm)
Gaskets for 3/8" (10 mm) to 1/2 (12 mm) Glass;
Washers; Cover Plates; Strike. Handles Not Included
(Must be Ordered Separately).
• Works on Single For Use With: PTH314 Series Latch Keeper;
PTH302/303/306 Series Lever Handles.
or Double Gates Glass Fabrication Required:
2-7/8" Two 1-3/4" (45 mm) Holes (Template Included).
(73 mm)
SINGLE
GATE DOUBLE GATES
CAT. NO. FINISH
PTH312 PTH312 PTH314 PTH312A Clear Anodized
Lever Handles Not Included PTH312PS Polished Stainless
(See next page) Minimum order: 1 each. All finishes can be combined for quantity pricing.
CRL Glass Mounted Latch Keeper INCLUDES: Stamped Body with Cover Plates;
Latch Strike.
For Use With: PTH311 Series Latch
• Works With Either Latch with Lock; PTH312 Series Passage Latch.
6-7/8"
Above on Double Gates (174 mm) Glass Fabrication Required:
Two 1-3/4" (45 mm) Holes (Template Included).
2-7/8"
DOUBLE GATES
(73 mm)
CAT. NO. FINISH
PTH311 PTH314 PTH314A Clear Anodized
or PTH312
PTH314PS Polished Stainless
Minimum order: 1 each. All finishes can be combined for quantity pricing.

CRL GATE HARDWARE For Pricing on CRL Products, Call Toll Free
CRL Standard Length Keyed CRL Extended Length Keyed

Cylinder Lock With Thumbturn Cylinder Lock With Thumbturn
• Designed to Work in Most PTH311 • Designed to Work on a Special PTH311
Series Lever Latch Installations Series Lever Latch Installations and
• Available in Four Finishes Euro Style Patch Locks
This Standard Length Key
• Available in Three Finishes
Cylinder Lock/Thumbturn works This Extended Length Key
with all PTH311 Series Latches, Cylinder Lock/Thumbturn works
except when the latch is used on a PTH311 Series Lever Latch
with a PTH314 Series Glass installation, in conjunction with a
Mounted Latch Keeper on an PTH314 Glass Mounted Latch
inswing gate. This requires the Keeper on an inswing gate. It also
EC3 Series Extended Length works on all EUR205, EUR680,
Keyed Cylinder Lock/Thumbturn and EUR681 Series Euro Style
at the right. The EC4 Series is Patch Locks. The EC3 Series is
only available keyed randomly. Includes 3 Keys and Screw available keyed alike or randomly. Includes 3 Keys and Screw
KEYED RANDOMLY
CAT. NO. FINISH KEYED RANDOMLY KEYED ALIKE
EC4A Matte Chrome CAT. NO. CAT. NO. FINISH
EC4BR Polished Brass EC3BR EC3BRKA Polished Brass
EC4BS Brushed Stainless EC3BS EC3BSKA Brushed Stainless
EC4PS Polished Stainless EC3PS EC3PSKA Polished Stainless
Minimum order: 1 each. All Patch Locks can be combined for quantity pricing. Minimum order: 1 each. All Lever Locks can be combined for quantity pricing.
CRL Tubular Style Lever Handles • Available in Four Finishes

INCLUDES:
6" One Pair of Handles; Hex Wrench
(152.4 mm) FOR USE WITH:
PTH311 and PTH312 Glass Mounted Latch Mechanisms.
CAT. NO. FINISH
PTH302A Satin Anodized
2-3/8" PTH302PS Polished Stainless
(60.3 mm)
Minimum order: 1 each. All Lever Handles can be combined for quantity pricing.
CRL Sculptured Style Lever Handles • Available in Three Finishes

INCLUDES:
5" One Pair of Handles; Hex Wrench
(127 mm)
FOR USE WITH:
CAT. NO. FINISH
(54 mm) Minimum order: 1 each. All Lever Handles can be combined for quantity pricing.
CRL Modern Style Lever Handles • Available in Three Finishes

INCLUDES:
5-1/4" One Pair of Handles; Hex Wrench
(133.4 mm) FOR USE WITH:
CAT. NO. FINISH
(57.2 mm) Minimum order: 1 each. All Lever Handles can be combined for quantity pricing.

CRL Atlas Series 'All-Glass' Door and Gate Hinge

• Ideal for Large Interior Doors and Gates
• Automatic Closing Function
• Will Hold Open at 90 Degrees
• Easy Closed Position Adjustment for Double
Door or Inline Panel Applications
• Available in Brushed Nickel, Brass, Chrome,
and Oil Rubbed Bronze Finishes, as Well as
Custom Finishes
This innovative CRL Atlas Series 'All-Glass' Door and Gate Hinge
gives you the best of two worlds; minimal hardware and automatic
closing action, all wrapped up in a stylish, heavy-duty Hinge. Two of
these double-acting Hinges will allow you to create 'all-glass' doors
and gates weighing up to 140 pounds (63.5 kg) with a maximum
width of 39" (1000 mm).
NOTE: Do not exceed two Hinges per door or gate.
The automatic closing function with adjustable spring strength
eliminates the need for any closer mechanism, and will close the
door or gate from any position. When fully opened, the Atlas Hinge
will hold open at 90 degrees. These Hinges offer easy fine-tune • Both Spring Tension and Closing
closed position adjustment. Position are Easy to Adjust
The solid brass construction and stainless steel components
make the Atlas Hinge a natural for applications that may involve
excess moisture.
SPECIFICATIONS
Glass Thickness Range: 5/16" to 1/2" (8 to 12 mm)
Construction: Solid Brass
Hinge Swings: 90 Degrees Inwards and Outwards
Closing Type: Automatic Closing From Any Position and
Precise Closing to 0 Degrees
Special Feature: Holds Open at 90 Degrees; Adjustable
Closed Position
Notch and Hole Required
Adjusting the
Includes: Gaskets, Phillips Screws, and Glass
Spring Tension
Fabrication Dimensions
*MAXIMUM 5/16" TO 1/2" (8 TO 12 MM) GLASS

CAPACITIES WEIGHT DOOR WIDTH
Using Two Hinges 140 lbs/63.5 kg 39"/1000 mm
* NOTE: Do not exceed maximum door weight or width. Do not exceed two hinges per door.
3-11/16"
(94 mm)
Adjusting the
Closing Position
3-9/16"
(90 mm)
CAT. NO. FINISH

ATL01CH Polished Chrome
ATL01BN Brushed Nickel
MODEL ATL01 ATL01BR Polished Brass
5-7/8" Opens 90 ATL010RB Oil Rubbed Bronze
(149 mm) degrees outwards Minimum order: 1 each. All Frameless Hinges can be combined for quantity pricing. Other finishes
available on special order. NOTE: 'All-Glass' Door Hinges are sold by the each, not in pairs.
and inwards Be sure to order a minimum of two each hinges to install one door or gate.

Typical Installation Showing Atlas Hinge Positions

• For Gate Applications
8"
(203.2 mm)
CL
Maximum Gate
Width not to exceed
39" (1000 mm)
Maximum Gate
Weight not to exceed
140 pounds (63.5 kg)
CL
8"
(203.2 mm)
1/4" (6.3 mm) 2" (50.8 mm) 1/8" (3.2 mm)

Gap Bottom Clearance Gap (Typical)
Overall Gate
Opening Width
Four Architectural Finishes 'All-Glass' Gate Accessories

Lever Handle Latches
Chrome Brass
Gate Latches
See pages R592-R593
Brushed Oil Rubbed See page R596

Nickel Bronze

CRL Magna-Latch 3/8"

"Side Pull" Gate Latch 1-1/4"
(31.8 mm)
(10 mm) 1"
(25.4 mm)
• Great for Around Homes and Gardens
• Reliable, Effective, and Unobtrusive
• Quick and Easy Installation
2-3/4"
• Magnetic Self-Latching Trigger (69.9 mm)
Latch
• Easily Mounts to Metal, Wood, and Vinyl Release
Knob
The magnetic, self-latching CRL Magna-Latch is an ideal
general-purpose latch for gates around homes and gardens.
It’s suitable for a wide variety of uses where a non-key lockable 1-1/4"
(31.8 mm)
latch is needed. When used on picket-style swimming pool
gates a compliant acrylic shield must be used to prevent latch CAT. NO. DESCRIPTION COLOR
access by toddlers. Consult your local building code for more Side Pull Gate Latch Black
MLSP1
information. For more latch information go to crlaurence.com. Minimum order: 1 each.
CRL 180 Degree CRL Outside 90 Degree

Glass-to-Glass Glass-to-Glass
Gate Latch Gate Latch
• Designed for • Designed for
1/2" (12 mm) 1/2" (12 mm)
Outside
Tempered Glass Outside
Tempered Glass
Applications Only 90 Degree Corner
Applications
This Glass-to-Glass Swinging
This Glass-to-Glass Panel
Gate Latch is mounted to Swinging
Fixed Panel
Gate Latch is mounted to Fixed
the inside of the opening Panel Panel
the inside of the opening
for out-swinging gates.
Glass Fabrication is required. for out-swinging gates. Glass Fabrication is required.
For more information Installation instructions and fabrication Installation instructions and fabrication
For more information go
go to crlaurence.com. template included in package. template included in package.
to crlaurence.com.
CAT. NO. DESCRIPTION FINISH CAT. NO. DESCRIPTION FINISH
MLSP2BS 180 Degree Gate Latch Brushed Stainless MLSP3BS 90 Degree Gate Latch Brushed Stainless
CRL Wall/Square Post CRL 1.9" Round Post

Mount Gate Latch Mount Gate Latch
• Designed for • Designed for
1/2" (12 mm) 1/2" (12 mm)
Tempered Glass Tempered Glass
Applications Only Outside
Applications Only Outside
This Gate Latch is
This Gate Latch is mounted
mounted to the inside of
to the inside of the opening for 1.9"
the opening for out-swinging Round
Swinging out-swinging gates. The Gate
gates. The Gate Latch is Post Swinging
Wall Panel Latch is designed for round
designed for square post Panel
post mount applications. For
and wall mount applications.
Glass Fabrication is required. more information go to Glass Fabrication is required.
For more information go to Installation instructions and fabrication Installation instructions and fabrication
crlaurence.com.
crlaurence.com. template included in package. template included in package.
CAT. NO. DESCRIPTION FINISH CAT. NO. DESCRIPTION FINISH

MLSP4BS Wall/Square Post Mount Gate Latch Brushed Stainless MLSP5BS 1.9" Round Post Mount Gate Latch Brushed Stainless

CRL Single Acting Wall- new CRL Single Acting Glass- new
to-Glass Gate Hinge to-Glass Gate Pivot Patch
• Handed Self-Closing Hinge for Use • Handed Self-Closing Hinge for
With 3/8" or 1/2" (10 or 12 mm) Use With 3/8" or 1/2"
Tempered Glass (10 or 12 mm) Tempered Glass
• All 316 Alloy Brushed or • All 316 Alloy Brushed or
Polished Stainless Steel Polished Stainless Steel
Left Hand (LH)
Inside
3-1/2"
3-1/2" (89 mm)
(89 mm) Outside
Hinge Side Strike Side
Right Hand (RH)
Inside
LH/RHR Shown Outside
2-11/16" 1.9" (48.3 mm) Strike Side Hinge Side

LH/RHR Shown Diameter Post 2-11/16" Left Hand Reverse (LHR)
(68.3 mm) Wall Mount Hinge (68.3 mm)
Adaptor Plate Inside
CRL Single Acting Wall-to-Glass Gate Hinges are handed and

Outside
self-closing. They can be screwed to the wall or to a 1.9" (48.3 mm)
Hinge Side Strike Side
diameter post if used with the Adaptor Plate (sold separately). 3-1/2" Right Hand Reverse (RHR)
Two 3/4" (19 mm) holes are required for each Hinge. Maximum width (89 mm) Inside
42" (1067 mm); maximum weight 65 lbs. (29.5 kg). Instructions,
cut-out template and two #10 x 1-1/2" mounting screws are included Outside
Strike Side Hinge Side
in each box.
Gate Side Fixed Glass Side How to Determine Handing
WALL-TO-GLASS HINGES
BRUSHED STAINLESS POLISHED STAINLESS CRL Single Acting Glass-to-Glass Gate Hinges are handed and
CAT. NO. CAT. NO. HANDING self-closing. Two 3/4" (19 mm) holes are required for each side of
GH037LBS GH037LPS LH/RHR the hinge (two on fixed panel and two on the gate). Maximum width
GH037RBS GH037RPS RH/LHR 42" (1067 mm); maximum weight 65 lbs. (29.5 kg). Instructions and
Minimum order: 1 each. All Gate Hinges can be combined for quantity pricing. cut-out template are included in each box.
1.9" DIAMETER POST ADAPTOR PLATE BRUSHED STAINLESS POLISHED STAINLESS
BRUSHED STAINLESS POLISHED STAINLESS CAT. NO. CAT. NO. HANDING
CAT. NO. CAT. NO. HANDING GH180LBS GH180LPS LH/RHR
AP037BS AP037PS Universal GH180RBS GH180RPS RH/LHR
Minimum order: 1 each. Minimum order: 1 each. All Gate Hinges can be combined for quantity pricing.
CRL Tubing Hinge new CRL Tubing Latch and Strike

• Free-Swinging Hinge for Use With
1.9" (48.3 mm) Diameter Tubing
• Manually Operated Latch Bar for Use
With 1.9" (48.3 mm) Diameter Tubing new
• 316 Alloy Brushed Stainless Steel • 316 Alloy Brushed Stainless Steel
3-1/4" (82.6 mm)
CL CL
1-13/16"
1-13/16" 1-9/32"
1-9/32" (46 mm)
(46 mm) (32.5 mm)
(32.5 mm)
CL CL
This CRL Tubing Hinge is designed to work with 1.9" (48.3 mm) 3/4" (19 mm)
diameter tubing. The Hinge is free-swinging, and pivots on a nylon This CRL Tubing Latch and Strike is designed to work with
bearing. Hinge is secured from the back side with supplied screws. 1.9" (48.3 mm) diameter tubing. Latch has a manually operated
Maximum width 42" (1067 mm); maximum weight 65 lbs. (29.5 kg). pivoting bar, and is secured with supplied screws. Minimum order
Minimum order is one each. CAT. NO. TH12BS is one each.
CAT. NO. TL22BS
CRL CRS POST RAILING SYSTEM Contact CRL Tech Sales for complete planning
CRL Component Railing System for Use With Glass Infill Panels
• Design and Build Custom Post Railings From
The CRL Component Railing System is Patent Pending
Stock Parts for Practically Any Application
• Non-Welded Mechanical Connections
for Speedy Job Site Installation MANUFACTURED IN THE USA
BY C.R. LAURENCE
• Clean Vertical Lines Without Glass Clamps

• Utilizes Our Popular Cap Rails
and Companion Parts
• Several Post Mounting Options Available
• Polished or Brushed Stainless Steel
Finishes Available From Stock
If you are looking for a railing system that is a step above an
aluminum system, but do not want the expense of a custom welded
stainless steel system, try our new CRS Component Railing System.
It combines the strength of 1-1/2" (38.1 mm) Schedule 40 Stainless
Steel Posts and a complete selection of CRS Adapter Fittings with our
popular Cap Rails and Components to create an easy to assemble and
install railing system. Glass Infill Panels are secured without Glass
Clamps, and their bottom edges are protected with an attractive Bottom
Cap Rail.
By using our specially designed CRS Adapter Fittings you can build
your own railings from stock for practically any railing requirements you
may encounter. CRS Top Adapter Fittings are simply bonded to the
vertical posts using our Cat. No. 32629 Metal Contact Cement (see
page R667). You can then bond any of our 2" (50.8 mm) or larger
diameter Stainless Steel Cap Rails to the Adapters. The Cap Rails are
used in conjunction with matching diameter Corners, Connector Sleeves,
and End Caps to create a wide variety of designs to meet most every
need. A 1-1/2" (38.1 mm) diameter Stainless Steel Bottom Cap Rail
easily attaches to the pre-drilled and tapped CRS Posts using a variety
of CRS Bottom Rail Adapter Fittings (see following pages) for level,
sloped or stair applications.
CRL custom fabricates CRS Posts in five configurations: Flange
Mount, Core Drill Mount, Stair Mount, Ramp Mount and Fascia Mount.
These Posts are used with standard CRS Components and either 3/8"
or 1/2" (10 or 12 mm) Tempered Glass Infill Panels to complete the
installation. The CRS System utilizes a 'lift and drop' method of glass
installation, allowing for less then perfect fabricated glass panels. No
costly holes are required, and the top and bottom edges are captured,
reducing polishing time and expense.
You can purchase stock CRS Components and Cap Rails to do
your own fabrication, or you can let our expert fabricators do the
work for you, leaving you with an easy to assemble railing package
completely fabricated to your specifications. Polished stainless steel
or brushed stainless steel finishes are available from stock.
See pages
R738 to R745
for our Aluminum
Component
Railing System

CRL CRS POST RAILING SYSTEM For Pricing on CRL Products, Call Toll Free
Typical CRS Post Railing Installation MANUFACTURED IN THE USA

BY C.R. LAURENCE
The CRL Component Railing System is Patent Pending An ISO9001:2000 Certified Company
8
13
5 15
12
11 14
6
10
7
9
16
CRS POST RAILING COMPONENTS USED IN THE TYPICAL Railing Systems Technical Assistance
INSTALLATION SHOWN ABOVE
(1) CR1540PEBS - Page R608 (9) CR20ECBS - Page R606 Component selection and glass sizing assistance is available
(2) CR15TAEBS - Page R603 (10) CR15FBBS - Page R610 from CRL Technical Sales. Allow our Railing Specialists to help
(3) CR15TA180BS - Page R603 (11) CR15BABS - Page R606 you choose the right number and size of components to finish
(4) CR15TA90BS - Page R604 (12) CR1544PCBS - Page R610 your planned installation with a minimum of waste. Call
(5) CR15TAABS - Page R605 (13) GR20BS - Page R601 (800) 421-6144 in the U.S., (877) 421-6144 from Canada, or
(6) CR1542PCBS - Page R609 (14) GR15BS - Page R601 (323) 588-1281 International. Ask for Extension 7730. You
(7) CR15BALSBS - Page R607 (15) GR20HBS - Page R560 can also send e-mail from the crlaurence.com home page.
(8) CR15BAUSBS - Page R607 (16) CR1ADABS - Page R612 Click on Contact Us, and then click on Technical Sales for
Railing Products.
All are available in both Brushed and Polished Stainless finishes.

• Bump-Formed and Welded 120" (3.05 m) and

168" (4.27 m) Stock Lengths are Available in MANUFACTURED IN THE USA
BY C.R. LAURENCE
Four Architectural Finishes

• Diameters From 1-1/2" (38.1 mm) to 1-1/2"
(38.1 mm)*
4" (101.6 mm)
• Connect to a Variety of Fabricated Corners
and End Caps 2"
(50.8 mm)
Also Available
• For Stainless, Alloy 304 is Standard;
316 Alloy Available on Special Order 2-1/2"
(63.5 mm)
CRL’s Premium Cap Rails are manufactured using a
unique process known as Bump-Forming that ensures
accuracy, consistency, and high quality for our customers.
Unlike Roll-Formed Cap Rails, Bump-Formed Cap Rails
do not contain the stress and spring back associated with 3"
the roll-formed product. Welds on both sides of the (76.2 mm)
channel add strength and stability to the Cap Rail. This
results in a Cap Rail with tighter tolerances, consistent
radius, and the ability to fit into welded corners without
twist or discoloration. Put simply, it means this is the best
product in the market place.
All CRL Premium Cap Railings are formed using
precision tooling to maintain uniform diameters, allowing
for smooth hairline transitions at splices, corners, and 3-1/2"
end caps. The internal channel is welded in place to (88.9 mm)
increase strength and stability for fabrication. Use of our
Cat. No. 32629 Metal Contact Cement (see page R667)
is required to achieve a secure and permanent bond at
all connections. Use Connector Sleeves shown on page
R573 to connect Cap Rails. *NOTE: 1-1/2" (38.1 mm)
diameter is used as the bottom rail. All other diameters
can be used at the top. When used with 1/2" (12 mm)
glass, Cat. No. GR5PV Cap Rail Vinyl (see page R557)
and 95CBL Silicone should be used to secure the glass.
4"
When used with 5/8" (16 mm) glass, secure with 95CBL (101.6 mm)
Silicone Sealant (see page R536) and Shims only. Please
contact CRL Railing Technical Sales for more information
or for a quote.

1-1/2" (38.1 MM) DIAMETER PREMIUM CAP RAIL IN 120" (3.05 M) AND 168" (4.27 M) LENGTHS D
CAT. NO. CAT. NO.
GR15BS GR15BS14 Brushed Stainless 5/8" (15.9 mm) 5/16" (7.9 mm) .050" (1.27 mm) GR15CSS
W
GR15PS GR15PS14 Polished Stainless 5/8" (15.9 mm) 5/16" (7.9 mm) .050" (1.27 mm) GR15CSS
GR15PB GR15PB14 Polished Brass 5/8" (15.9 mm) 5/16" (7.9 mm) .050" (1.27 mm) GR15CSB
GR15SB GR15SB14 Satin Brass 5/8" (15.9 mm) 5/16" (7.9 mm) .050" (1.27 mm) GR15CSB D
Minimum order: 1 each. Sizes and finishes can be combined for quantity pricing. GR15 Series Cap Rail is used as the bottom rail only for CRS Post Railing System.
CAT. NO. CAT. NO.
CAT. NO. CAT. NO.
CAT. NO. CAT. NO.
GR30SB GR30SB14 Satin Brass 3/4" (19 mm) 1-3/8" (34.9 mm) .0625" (1.59 mm) GR30CSB D
CAT. NO. CAT. NO.
GR35PS GR35PS14 Polished Stainless 3/4" (19 mm) 1-7/8" (47.6 mm) .0625" (1.59 mm) GR35CSS W
CAT. NO. CAT. NO. D
GR40PB GR40PB14 Polished Brass 3/4" (19 mm) 2-3/8" (60.3 mm) .0625" (1.59 mm) GR40CSS
GR40SB GR40SB14 Satin Brass 3/4" (19 mm) 2-3/8" (60.3 mm) .0625" (1.59 mm) GR40CSS
Premium Cap Rail Accessories for 1/2" (12 mm) or 5/8" (16 mm) Glass
See pages R560, R562, R566 See page R573 See pages R558-R559 See page R667

(CRS) Component Railing System at Stair Location
(CRS) Component Railing System at Ramp Location
CRL 1-1/2" Schedule 40 Pipe Rail Tubing

• Designed for Post Sections at Guard Rails,
Stairways, and Handicap Ramp Areas .145" (3.8 mm)
Wall Thickness
• 1.9" (48.3 mm) Outside Diameter 1.9"
(48.3 mm)
• Available in Polished or Brushed Stainless
Steel, Mill, or Powder Coated Aluminum
For Stock 36" and 42"
• Available in Stock Lengths and Custom (914 and 1067 mm)
Posts see pages R608
Fabricated to Your Specifications to R609.
1-1/2" (38.1 MM) SCHEDULE 40 PIPE RAIL TUBING

CAT. NO. FINISH WALL THICKNESS LENGTH CRL's 1-1/2" Schedule 40 Pipe Rail Tubing is designed for
PR15BS10 Brushed Stainless .145" (3.8 mm) 120" (3.05 m) post sections at guard rail, hand rail, stairway, and handicap
PR15BS20 Brushed Stainless .145" (3.8 mm) 240" (6.10 m) ramp areas. Formed using precision tooling to maintain uniform
PR15PS10 Polished Stainless .145" (3.8 mm) 120" (3.05 m) diameters and allowing for smooth hairline transitions at splice
PR15PS20 Polished Stainless .145" (3.8 mm) 240" (6.10 m) and Top Rail Adapter locations. Use of our Cat. No. 32629
HR19M Mill Finish Aluminum .145" (3.8 mm) 240" (6.10 m) Metal Contact Cement (see page R667) is required to achieve
Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing. Must ship via common carrier. a secure and permanent bond at all connections.
See page R647 for Base Flanges.


CRL CRS Top Rail Adapter 2-7/16"
3/4" (61.9 mm)
for End Posts (19 mm)
• Provides Easy Attachment of 1-1/8"

Cap Rails to Vertical Posts (28.6 mm)
• Ready to Install 3-11/16"

(93.6 mm)
• Can Be Customized to Meet
Specific Needs
• Made From Alloy 316
Stainless Steel
• Available in Brushed or
1-5/8"
Polished Stainless Steel Supplied with one 2" (41.3 mm)
(50.8 mm) Pocket Filler 1-15/16"
CRL Top Rail Adapters easily slip into 1-1/2" (see page R605) (49.2 mm)
(38.1 mm) Schedule 40 Stainless Steel Posts
to provide for attachment of 2" to 4" (50.8 to
101.6 mm) diameter Cap Railing. They can be POST HEIGHT DEDUCTION
modified to meet specific needs. Use of our Cat. Cap Rail Height from Top of Cap
No. 32629 Metal Contact Cement (see page Diameter Rail to Top of Post (A)
R667) is required to achieve a secure and
A 2" (51 mm) 4" (102 mm)
permanent bond. 4-1/2" (114 mm)
2-1/2" (64 mm)
CAT. NO. FINISH 3" (76 mm) 5" (127 mm)
3-1/2" (89 mm) 5-9/16" (141 mm)
CR15TAEBS Brushed Stainless
4" (102 mm) 6-1/16" (154 mm)
CR15TAEPS Polished Stainless
Minimum order: 1 each. All Top Rail Adapters can be combined for quantity pricing.
CRL CRS Top Rail Adapter 4"

(101.6 mm)
for 180 Degree Center Posts 3/4"
(19 mm)
• Provides Easy Attachment of 1-1/8"


(93.6 mm)
• Can Be Customized to Meet
Specific Needs
Stainless Steel
• Available in Brushed or 1-5/8"
Polished Stainless Steel 1-15/16" (41.3 mm)
(49.2 mm)
Supplied with two 2"
CRL Top Rail Adapters easily slip into 1-1/2" (50.8 mm) Pocket Fillers
(see page R605)
modified to meet specific needs. Use our Cat.
Cap Rail Height from Top of Cap
R667) is required to achieve a secure and
permanent bond. A 2" (51 mm) 4" (102 mm)
2-1/2" (64 mm) 4-1/2" (114 mm)
CR15TA180BS 3-1/2" (89 mm) 5-9/16" (141 mm)
Brushed Stainless
4" (102 mm) 6-1/16" (154 mm)
CR15TA180PS Polished Stainless


(41.3 mm)
3/4"
for 90 Degree Corner Posts (19 mm)
1-1/8"
(28.6 mm)
• Provides Easy Attachment of

Cap Rails to Vertical Posts
3-11/16"
• Can Be Customized to (93.6 mm)
Meet Specific Needs

Stainless Steel
1-5/8"
Polished Stainless Steel (41.3 mm)
1-15/16"
Supplied with two 2" (49.2 mm)
CRS Top Rail Adapters easily slip into 1-1/2" (50.8 mm) Pocket Fillers
(38.1 mm) Schedule 40 Stainless Steel Posts (see page R605)
modified to meet specific needs. Use our Cat. Cap Rail Height from Top of Cap
R667) to achieve a secure and permanent bond.
A 2" (51 mm) 4" (102 mm)
2-1/2" (64 mm) 4-1/2" (114 mm)
CR15TA90BS Brushed Stainless 3-1/2" (89 mm) 5-9/16" (141 mm)
CR15TA90PS Polished Stainless 4" (102 mm) 6-1/16" (154 mm)
3/4"
(19 mm)
for 135 Degree Corner Posts (47.6 mm)
1-1/8"
• Provides Easy Attachment (28.6 mm)
of Cap Rails to Vertical Posts
3-11/16"
• Ready to Install (93.6 mm)
• Can Be Customized to
Meet Specific Needs
Stainless Steel
• Available in Brushed or 1-5/8"
(41.3 mm)
Polished Stainless Steel Supplied with two 2"
1-15/16"
(49.2 mm)
(50.8 mm) Pocket Fillers
CRS Top Rail Adapters easily slip into 1-1/2" (see page R605)
POST HEIGHT DEDUCTION
101.6 mm) diameter Cap Railing. They can be
modified to meet specific needs. Use our Cat. Cap Rail Height from Top of Cap
R667) to achieve a secure and permanent bond. A 2" (51 mm) 4" (102 mm)
2-1/2" (64 mm) 4-1/2" (114 mm)
CR15TA135BS Brushed Stainless 3-1/2" (89 mm) 5-9/16" (141 mm)
CR15TA135PS Polished Stainless 4" (102 mm) 6-1/16" (154 mm)

CRL CRS Top Rail Adapter The CRL Component Railing System is Patent Pending
4"
With Adjustable Top 3/4"
(19 mm)
(101.6 mm)
• Adjustable Angle for Use on Any

Stair or Ramp
• Provides Easy Attachment of 3"
• Available in Brushed or Polished

Stainless Steel
• Made From Alloy 316 Stainless Steel
(41.3 mm)
Supplied with two 2"
CRS Top Rail Adapters easily slip into 1-1/2" (38.1 mm) (50.8 mm) Pocket Fillers 1-15/16"
Schedule 40 Stainless Steel Posts to provide for attachment (see below) (49.2 mm)
of 2" to 4" (50.8 to 101.6 mm) diameter Cap Railing. This
Adapter can be adjusted to match the slope of your stairs or
ramp. Use our Cat. No. 32629 Metal Contact Cement (see
page R667) to achieve a secure and permanent bond.
POST HEIGHT DEDUCTION
NOTE: For assistance in calculating post heights
CAT. NO. FINISH A when using Adjustable Top Rail Adapters, please
CR15TAABS Brushed Stainless contact our Railing Specialists in the CRL
CR15TAAPS Polished Stainless Technical Sales Department at ext. 7730.
CRL CRS Pocket Filler Channel

27/32"
• Adds Finished Look (21.4 mm)
• Available in Brushed or 11/32"

(8.7 mm)
CRS Pocket Filler Channel adds an attractive, finished look MANUFACTURED IN THE USA
BY C.R. LAURENCE
to the CRS System. Each CRS Top Adapter comes with the An ISO9001:2000 Certified Company
required channel for standard 2" (50.8 mm) gaps between the
glass and the post. We stock 2" (50.8 mm) replacement Filler
Channels and 60" (1524 mm) stock lengths that you can cut
for custom glass spacing. Use of our Cat. No. 32629 Metal
Contact Cement (see page R667) is required to achieve a
secure and permanent bond.
CAT. NO. FINISH LENGTH

CRFBS2 Brushed Stainless 2" (50.8 mm)
CRFPS2 Polished Stainless 2" (50.8 mm)
CRFBS60 Brushed Stainless 60" (1524 mm)
CRFPS60 Polished Stainless 60" (1524 mm)
Minimum order: 1 each. All Pocket Filler Channels can be combined for quantity pricing.
Cap Rails Vinyl Corners Connector Sleeves End Caps
See pages R600 to R601 See page R612 See pages R560, R562, R566 See page R573 See page R606

CRL CRS Top Rail End Caps The CRL Component Railing System is Patent Pending
• Available in Five Diameters

• Available in Brushed or MANUFACTURED IN THE USA
BY C.R. LAURENCE
CRS Top Rail End Caps are manufactured with a flat

bottom to closely match the diameters of our 2" to 4"
(50.8 to 101.6 mm) Premium Cap Rails. Use our Cat.
No. 32629 Metal Contact Cement (see page R667) to
achieve a secure and permanent bond.
CAT. NO. CAP RAIL DIAMETER FINISH FITS CAP RAIL NO.
CR20ECBS 2" (50.8 mm) Brushed Stainless GR20BS/GR20BS14
CR20ECPS 2" (50.8 mm) Polished Stainless GR20PS/GR20PS14
CR25ECBS 2-1/2" (63.5 mm) Brushed Stainless GR25BS/GR25BS14
CR25ECPS 2-1/2" (63.5 mm) Polished Stainless GR25PS/GR25PS14
CR35ECBS 3-1/2" (88.9 mm) Brushed Stainless GR35BS/GR35BS14
CR35ECPS 3-1/2" (88.9 mm) Polished Stainless GR35PS/GR35PS14
Minimum order: 1 each. All Post and Rail Caps can be combined for quantity pricing.
CRL CRS Rail Adapter

for Level Bottom Rails
• Provides Easy Attachment of Level
Bottom Rail to Vertical Posts
Stainless Steel
CRS Rail Adapters for Bottom Rails easily attach 1-13/16"
(46 mm)
to 1-1/2" (38.1 mm) Schedule 40 Stainless Steel
Posts to provide for attachment of 1-1/2" (38.1 mm)
Diameter Cap Railing when used as the Bottom
Rail of the CRS System. Unlike the Top Rail, only
the 1-1/2" (38.1 mm) size can be used as the
Bottom Rail. Comes with Rail Connecting Block
and 5/16-18 Socket Head Cap Screw. Use our
Cat. No. 32629 Metal Contact Cement (see page
1-5/16"
(33.3 mm)
CAT. NO. FINISH
CR15BABS Brushed Stainless
CR15BAPS Polished Stainless Field measure to next Rail Adapter for
Minimum order: 1 each. All Bottom Rail Adapters can be combined for quantity pricing. accurate cut length on Bottom Rail

CRL CRS Adjustable Upper Adapter The CRL Component Railing System is Patent Pending
for Sloped Bottom Rails

• Provides Easy Attachment of Sloped
Bottom Rails to Vertical Posts
• Adjustable Angle for Use on
Any Stair or Ramp
CRS Adjustable Upper Adapters for Sloped Bottom Rails
2-5/16"
easily attach to 1-1/2" (38.1 mm) Schedule 40 Stainless (58.7 mm)
Steel Posts to provide for attachment of 1-1/2" (38.1 mm)
Diameter Cap Railing when used as the Bottom Rail of the
CRS System. Unlike the Top Rail, only the 1-1/2" (38.1 mm)
size can be used as the Bottom Rail. Comes with Rail
Connecting Block and 5/16-18 Socket Head Cap Screw.
Use our Cat. No. 32629 Metal Contact Cement (see page
CAT. NO. USE ON FINISH 1-5/16"
CR15BAURBS Ramps Brushed Stainless (33.3 mm)
CR15BAURPS Ramps Polished Stainless
CR15BAUSBS Stairs Brushed Stainless
CR15BAUSPS Stairs Polished Stainless Field measure to next Rail Adapter for
CRL CRS Adjustable Lower Adapter

for Sloped Bottom Rails
• Provides Easy Attachment of Sloped
Bottom Rails to Vertical Posts
• Adjustable Angle for Use
on Any Stair or Ramp
Stainless Steel
CRS Adjustable Lower Adapters for Sloped Bottom Rails
easily attach to 1-1/2" (38.1 mm) Schedule 40 Stainless
Steel Posts to provide for attachment of 1-1/2" (38.1 mm) 2-5/16"
Diameter Cap Railing when used as the Bottom Rail of the (58.7 mm)
CRS System. Unlike the Top Rail, only the 1-1/2" (38.1 mm)
size can be used as the Bottom Rail. Comes with Rail
Connecting Block and 5/16-18 Socket Head Cap Screw.
Use our Cat. No. 32629 Metal Contact Cement (see page 1-5/16"
R667) to achieve a secure and permanent bond. (33.3 mm)
CAT. NO. USE ON FINISH
CR15BALRBS Ramps Brushed Stainless
CR15BALRPS Ramps Polished Stainless
CR15BALSBS Stairs Brushed Stainless
CR15BALSPS Stairs Polished Stainless Field measure to next Rail Adapter for

CRL CRS 1-1/2" Diameter The CRL Component Railing System is Patent Pending
Schedule 40 Posts MANUFACTURED IN THE USA

BY C.R. LAURENCE
• Posts for Surface, Stair, Ramp, and

Fascia Mount Applications Available

• Available in Brushed or Polished Stainless Steel
We stock posts for 36" or 42" (914 or 1067 mm) finished railing
heights when using 2" (50.8 mm) Cap Rail. We can also provide
custom fabricated posts to meet your specific needs with an expedited
lead time. All CRS System Posts are pre-drilled and tapped for CRS
Bottom Rail Adapters.
CRL CRS Posts for Flange Mount

• Stock Posts Available for Immediate Shipment 1-1/2" (38.1 mm)
Schedule
• Available In Brushed or Polished Stainless Steel 40 Stainless
Steel Post
• Custom Fabricated Posts Available on Special Order
Cover
1-3/16"
(30.2 mm)
4-7/8"
(123.8 mm)
End Corner Center
90 DEGREE 180 DEGREE FINISHED CRS Series CR1540P Surface

END POST CORNER POST CENTER POST RAILING Mount Posts are pre-drilled and tapped
CAT. NO. CAT. NO. CAT. NO. HEIGHT FINISH for CRS Bottom Rail Adapters (ordered
CR1540PE36BS CR1540PL36BS CR1540PC36BS 36" (914 mm)* Brushed Stainless Steel separately), and have a welded floor
CR1540PE36PS CR1540PL36PS CR1540PC36PS 36" (914 mm)* Polished Stainless Steel flange and snap-on cover. Each Post
CR1540PE42BS CR1540PL42BS CR1540PC42BS 42" (1067 mm)* Brushed Stainless Steel is ready to install, and requires two
CR1540PE42PS CR1540PL42PS CR1540PC42PS 42" (1067 mm)* Polished Stainless Steel fasteners to attach to substrate.
Minimum order: 1 each. * Finished height based on using 2" (50.8 mm) Cap Rail. Use of larger Cap Rails is acceptable, but will increase the overall height of the system.
NOTE: For steel or concrete mounting only. Consult Technical Sales for wood applications. Fasteners not included with post.
CRL CRS Posts for Core Drill Mount

• Stock Posts Available for Immediate Shipment
1-1/2" (38.1 mm)
• Available In Brushed or Polished Stainless Steel Schedule
40 Stainless
• Custom Fabricated Posts Available on Special Order Steel Post
6"
(152.4 mm)
End Corner Center
90 DEGREE 180 DEGREE FINISHED

END POST CORNER POST CENTER POST RAILING CRS Series CR1541P Core Drill
CAT. NO. CAT. NO. CAT. NO. HEIGHT FINISH Mount Posts come ready to install,
CR1541PE36BS CR1541PL36BS CR1541PC36BS 36" (914 mm)* Brushed Stainless Steel whether you select our stock size Posts,
CR1541PE36PS CR1541PL36PS CR1541PC36PS 36" (914 mm)* Polished Stainless Steel or order them custom fabricated to your
CR1541PE42BS CR1541PL42BS CR1541PC42BS 42" (1067 mm)* Brushed Stainless Steel exact requirements. All come pre-drilled
CR1541PE42PS CR1541PL42PS CR1541PC42PS 42" (1067 mm)* Polished Stainless Steel and tapped for use with CRS Bottom
Minimum order: 1 each. * Finished height based on 6" (152.4 mm) embed depth and using 2" (50.8 mm) Cap Rail. Use of larger Cap Rails is acceptable, but will
increase the overall height of the system. Rail Adapters (ordered separately).

CRL CRS Custom Posts for Stair Mount The CRL Component Railing System is Patent Pending

• Custom Fabricated to Meet Your Requirements MANUFACTURED IN THE USA
BY C.R. LAURENCE
End Corner Center Custom
1-1/2" (38.1 mm)

Schedule
40 Stainless
Steel Post
Snap-On
CRS Series CR1542S Stair Flange Mount Posts come Cover
ready to install, custom fabricated to your exact requirements.
1-3/16"
All are pre-drilled and tapped for CRS Bottom Rail Adapters (30.2 mm)
(ordered separately), and have a welded floor flange and 4-7/8"
snap-on cover. (123.8 mm)
CRL CRS Custom Posts for Ramp Mount

• Custom Fabricated to Meet Your Requirements
1-1/2" (38.1 mm)

Schedule
40 Stainless
Steel Post
CRS Series CR1543R Ramp Mount Posts come ready to Snap-On

Cover
install, custom fabricated to your exact requirements. All are
pre-drilled and tapped for CRS Bottom Rail Adapters (ordered 1-3/16"
(30.2 mm)
separately). They are available with a welded floor flange and 4-7/8"
snap-on cover or as core mount. (123.8 mm)
CRL CRS Low Profile Cover

• For Use on Surface, Stair, Ramp or Core Mount Applications
These Low Profile Covers can be used in place of the standard cover on Surface,
Stair or Ramp Mount Posts when the mounting surface is below the finished floor.
They can also be used at the base of Core Mount Posts to dress up the installation.
CAT. NO. DIAMETER FINISH

CR15LPCBS 4-3/8" (111.1 mm) Brushed Stainless
CR15LPCPS 4-3/8" (111.1 mm) Polished Stainless

CRL CRS Custom Fascia Mount Posts The CRL Component Railing System is Patent Pending
• Available In Brushed or Polished Stainless Steel

• Custom Fabricated to Meet Your Requirements BY C.R. LAURENCE

CRS Fascia Mount Posts come ready to install, custom fabricated to your exact
requirements. All are pre-drilled and tapped for CRS Bottom Rail Adapters, and are
fabricated for use with Cat. No. CR15FB Series Fascia Mount Brackets, ordered
separately (see below).
CRL CRS Fascia Mount Brackets

• For Use With 1-1/2" Schedule 40
Stainless Steel Pipe
Stainless Steel
Outside
• Three Styles Available - Standard, Corner
Inside Corner, and Outside Corner Bracket
Inside Corner
Bracket
CRL CRS Fascia Mount Brackets are designed to work with our 1-1/2" Schedule 40 CRS
or WRS Posts. They allow you to mount your posts to the side of a deck or face of the stair
stringer, giving you more usable floor space or stair width. We offer three styles: Standard,
Inside Corner, and Outside Corner, allowing you complete flexibility in your railing design.
NOTE: Not for use with thin wall tubing. Standard
Bracket
CRL CRS Standard Fascia Mount Bracket new

• For Use With 1-1/2" Schedule 40
Stainless Steel Pipe
3-1/2"
• Made from Alloy 316 Stainless Steel 2-1/4"
(57.1 mm) (89 mm)
CRL CRS Standard Fascia Mount Brackets are designed

for use with center or end posts. Four fasteners, not included,
are required for mounting; a structural engineer should be
consulted for proper fastener selection. NOTE: Not for use
6-1/2"
with thin wall tubing. (165.1 mm)
CAT. NO. FINISH

CR15FBBS Brushed Stainless Steel
CR15FBPS Polished Stainless Steel
Minimum order: 1 each. All Fascia Mount Brackets can be combined for quantity pricing.

CRL CRS Inside Corner Fascia Mount Bracket new

• For Use With 1-1/2" Schedule 40 2-1/4"
Stainless Steel Pipe 4" (57.1 mm) 4"
(101.6 mm) (101.6 mm)
2-1/4"
CRL CRS Inside Corner Fascia Mount Brackets are designed (57.1 mm)
for use at inside corners of your railing, eliminating the need to
double-up on the posts at the corner. Four fasteners, not included,
are required for mounting. A structural engineer should be
6-1/2"
consulted for proper fastener selection. NOTE: Not for use with (165.1 mm)
thin wall tubing.
CAT. NO. FINISH

CRL CRS Outside Corner Fascia Mount Bracket new

3-11/16
• For Use With 1-1/2" Schedule 40 (93.7 mm)
2-1/4"
Stainless Steel Pipe (57.1 mm)
• Available in Brushed or Polished 3-11/16
Stainless Steel 2-1/4" (93.7 mm)
(57.1 mm)
CRL CRS Outside Corner Fascia Mount Brackets are 6-1/2"

(165.1 mm)
designed for use at outside corners of your railing,
eliminating the need to double-up on the posts at the corner.
Four fasteners, not included, are required for mounting.
A structural engineer should be consulted for proper fastener
selection. NOTE: Not for use with thin wall tubing.
CAT. NO. FINISH

Inside Corner Outside Corner

CRL CRS Cap Rail Return The CRL Component Railing System is Patent Pending
• A.D.A. Compliant and Ready to Install MANUFACTURED IN THE USA

BY C.R. LAURENCE
• Made From Alloy 316 Stainless Steel An ISO9001:2000 Certified Company
in Brushed or Polished Finishes

• Custom Returns Available on Request
No commercial railing is complete without an A.D.A.
Compliant Return on the hand rail. A Post Adapter is
supplied with the Return for easy attachment to the 2"
(50.8 mm)
CRS Post. Use our Cat. No. GR20CSS Connector 14" R 8"
Sleeve (see page R573) and a GR20L Lower Incline (355 mm) (203.2 mm)
Corner (see page R569) to attach the top of the C.T.C.
Return to the GR20 Series 2" (50.8 mm) diameter
Post Adapter 2"
Cap Rail. Our Cat. No. 32629 Metal Contact Cement Included (50.8 mm)
(see page R667) should be used to securely bond
R 6"
the Connector Sleeve and Post Adapter. (152.4 mm)
1/4"
2" (6.3 mm)
RETURN WITH POST ADAPTER (50.8 mm)
POST ADAPTER ONLY
CAT. NO. CAT. NO. FINISH 8-13/16"
CR1ADABS CR2ADABS Brushed Stainless (223.8 mm)
16-13/16"
CR1ADAPS CR2ADAPS Polished Stainless Adapter (427 mm)
Minimum order: 1 each. All Cap Rail Returns can be combined for quantity pricing. Only
CRL CRS Cap Rail Vinyl

• Rigid Black Vinyl Provides Protective
Barrier Between Metal Cap Rail and Glass
• Sizes for 3/8" (10 mm) and 1/2" (12 mm)
Glass
• Intended for Use in CRS Systems Only
CRS Cap Rail Vinyl provides a protective barrier between
the metal Cap Rail and the glass. When used in the Bottom
Rail, it also acts as the bottom setting block to ensure proper
glass engagement into the Top and Bottom Cap Rails. Use
Cat. No. 95CBL Silicone (see page R536) to secure the Vinyl
inside the pocket of the Cap Rail and also to the glass.
CAT. NO. CR3PVT CAT. NO. CR5PVT CAT. NO. CR3PVB CAT. NO. CR5PVB
3/8" 1/2"
(9.5 mm) (12.7 mm)
1-3/16" 1-3/16"
(30.2 mm) (30.2 mm)
13/16" 13/16"
(20.6 mm) (20.6 mm)
3/8" 1/2"
(9.5 mm) (12.7 mm)
CAT. NO. DESCRIPTION FITS FOR USE WITH LENGTH

CR3PVT* Cap Rail Vinyl used in CRS Top Rail only GR20, GR25, GR30, GR35, and GR40 Cap Rail 3/8" (10 mm) Glass 120" (3.05 m)
CR5PVT* Cap Rail Vinyl used in CRS Top Rail only GR20, GR25, GR30, GR35, and GR40 Cap Rail 1/2" (12 mm) Glass 120" (3.05 m)
CR3PVB* Cap Rail Vinyl used in CRS Bottom Rail only GR15 Series Cap Rail 3/8" (10 mm) Glass 120" (3.05 m)
CR5PVB* Cap Rail Vinyl used in CRS Bottom Rail only GR15 Series Cap Rail 1/2" (12 mm) Glass 120" (3.05 m)
Minimum order: 1 stock length. All Cap Rail Vinyl can be combined for quantity pricing. A Packing Charge will be added to orders of fewer than five combined lengths. * Stock lengths longer than 108" (2.74 m) must ship common
carrier, unless you specify we cut them for UPS. A Cutting Charge will apply.


When measuring an existing stairway for fabricated railings please keep in mind the importance of every measurement that is needed to
produce the required railing system. Measure every dimension that is indicated below to ensure your railing system is produced correctly.
Important: Depending on the complexity of
Style #1 your project, one or more of the following
may be required to accurately order: sketches
Measuring Short Run Stairways (4 or Fewer Treads) or drawings of your particular application
with dimensions; printed architectural
Dimensions Needed for Tread Mounted Post Rail System drawings or cad files; photos of the job site
conditions (digital images are preferable).
C Field Measure and Specify
Line Of Each Required Dimension
Finished Floor From the Key Below.
A=
Stair Angle
B=
D C=
A
H
D=
E=
E F=
J
B G=
H=
F J=
REQUIRED TOOLS K
TAPE MEASURE K=
SQUARE
PLUMB LINE Stair Angle=
LASER LEVEL G
Line of
SKETCH PAD Finished Floor
ANGLE FINDER
Style #2
Measuring Long Run Stairways (5 or More Treads) Each Required Dimension
Dimensions Needed for Tread Mounted Post Rail System From the Key Below.
C A=
B=
Post C=
D
Post D=
Stair Angle
E=
F=
A
G=
E H=
K F
J=
B Post K=
Stair Angle=
H
K G
Post
J
Line of
Riser 1 Finished Floor

CRL P-SERIES POST RAILING SYSTEMS Contact CRL Tech Sales for complete planning
CRL Stainless Steel Post Railing Kits MANUFACTURED IN THE USA

BY C.R. LAURENCE
P1 Series P2 Series P4 Series P6 Series P7 Series P8 Series
• Post Kits Designed for Interior or Exterior

Hand Rail and Guard Rail Applications
• Designed and Engineered to Meet or Exceed
Building Codes
• Accept 1/2" (12 mm) Tempered Glass
• Low Maintenance 316 Grade Stainless Steel
Alloy Posts Are Ready to Install
• Two Standard Stainless Finishes, With
Custom Powder Paint Finishes Also Available
• Standard 36" (914 mm) and 42" (1067 mm)
Post Heights Available
• Custom Styles and Heights on Special Order
C.R. Laurence manufactures a comprehensive selection of Post
Railing Kits that combine the durability of stainless steel components
with innovative designs and engineering. This ensures long-term
structural integrity and enhances project aesthetics. Our P-Series Post
Railing Kits offer a choice of six distinctive designs for both commercial
and residential applications. All are designed and engineered to meet
or exceed most local building codes. Posts are fabricated from 316
grade stainless steel, and come ready to install. Standard Post heights
are 36" and 42" (914 and 1067 mm), but you can also order them in
custom heights to meet your exact requirements. Standard finishes are
brushed and polished stainless steel, with custom powder paint finishes
available on special order. For the top rail you can select either 1-1/4"
or 1-1/2" (31.8 or 38.1 mm) Schedule 40 Hand Rail Tubing (see page
R653) in complementary or contrasting finishes.
NOTE: The 1/2" (12 mm) tempered glass is supplied by the customer,
and must be fabricated with pre-drilled holes to be fastened to the
Posts. CRL does not supply the glass, but can assist with the drilling
information. Please contact CRL Technical Sales for assistance in
planning your Post Railing project. C.R. Laurence is a fully accredited
quality assurance company that is ISO-9001:2000 Certified. With 40
years experience, C.R. Laurence has learned a lot about what it takes
to make quality products.

CRL P-SERIES POST RAILING SYSTEMS For Pricing on CRL Products, Call Toll Free
CRL P1 Series Post Railing Kits

• Designed to Accept 1/2" (12 mm)
Tempered Glass
• Supplied With Fixed Glass Fittings
BY C.R. LAURENCE
• Meets or Exceeds Code Standards

• Top Saddle Supports 1-1/4" (31.8 mm) or
1-1/2" (38.1 mm) Diameter Schedule 40
Hand Rail Tubing
• Standard Post Heights Are 36" (914 mm) and
42" (1067 mm), With Custom Heights Available
• Two Standard Stainless Finishes, With Custom
Powder Paint Finishes Also Available CRL P1 Post Railing Kits are designed for commercial or
residential installations that meet or exceed guard rail and hand
rail code standards. These P1 Surface Mounted Post Railing Kits
are manufactured from 2" (50.8 mm) square 316 Grade Stainless
Steel Tubing with 1/8" (3.2 mm) wall thickness. Kits are supplied
complete with a 5" x 5" (127 x 127 mm) Base Plate, Welded Top
Saddle, and factory mounted Fixed Glass Fittings. See page
R807 for more information on P-Post Top Rail Installation Tool Kit.
For screws to attach the Top Rail to the Saddle specify Cat. No.
PRS1032. These 10-32 x 5/8" stainless steel screws come
50 per pack. Minimum order is one pack.
4" 1-3/4"
(101.6 mm) (44.4 mm)
Railing Saddle
1-3/4" 4"
(44.4 mm) (101.6 mm)
RB50F Glass
Mount Fitting
40-9/16"
(1030.3 mm)
34-9/16"
(877.9 mm)
22-13/16" 2" x 2"

(579.4 mm) (50.8 x 50.8 mm)
Square Post 28-13/16"
(731.8 mm)
38-13/16"
(985.8 mm)
32-13/16" RB50F Glass

(833.4 mm) Mount Fitting
End 180 Degree Center 90 Degree Corner

Post Kit Post Kit Post Kit 6"
6"
(152.4 mm) (152.4 mm)
END POST KITS
36" HEIGHT 42" HEIGHT GLASS 5" x 5"
CAT. NO. CAT. NO. FITTING FINISH (127 x 127 mm) Base Plate
3/8" (9.5 mm) Thick
P136EBS P142EBS Fixed Type Brushed Stainless
P136EPS P142EPS Fixed Type Polished Stainless 36" Post Kit 42" Post Kit
Minimum order: 1 each. All Post Railing Kits can be combined for quantity pricing.
180 DEGREE CENTER POST KITS 90 DEGREE CORNER POST KITS

36" HEIGHT 42" HEIGHT GLASS 36" HEIGHT 42" HEIGHT GLASS
CAT. NO. CAT. NO. FITTING FINISH CAT. NO. CAT. NO. FITTING FINISH
P136CBS P142CBS Fixed Type Brushed Stainless P136LBS P142LBS Fixed Type Brushed Stainless
P136CPS P142CPS Fixed Type Polished Stainless P136LPS P142LPS Fixed Type Polished Stainless
Minimum order: 1 each. All Post Railing Kits can be combined for quantity pricing. Minimum order: 1 each. All Post Railing Kits can be combined for quantity pricing.


• Accepts 1/2" (12 mm) Tempered Glass
• Supplied With Fixed Glass Fittings BY C.R. LAURENCE
• Meets or Exceeds Code Standards

• Post Supports 1-1/4" (31.8 mm) Schedule 40

1.66" O.D. Horizontal Tubing Hand Rail Tubing
Powder Paint Finishes Also Available CRL P2 Post Railing Kits are designed for commercial or
residential applications that meet or exceed guard rail code
standards. Our P2 Surface Mounted Post Railing Kits are
manufactured from Stainless Steel Flat Bars, designed to support
1-1/4" (31.8 mm) Schedule 40 1.66" O.D. Horizontal Tubing. Kits
are supplied complete with a Base Plate and factory mounted Fixed
Glass Fittings.
Hole for 1-1/4" SCH. 40

1.66" O.D. Hand Rail
1-11/16"
(42.9 mm)
4"
(101.6 mm) 42-1/4"
1-11/16" (1073.1 mm)
RB50F Glass
(42.9 mm) Mount Fittings
4"
36-1/4" (101.6 mm)
(920.8 mm)
40-9/16"
(1030.3 mm)
Flat Bar S/S 26-9/16"

2-3/8" x 3/8" (674.7 mm)
20-9/16" (60.3 x 9.5 mm)
(522.3 mm)
34-9/16"
(877.9 mm)
36-9/16"
(928.7 mm)
RB50F Glass
30-9/16"
Mount Fittings
(776.3 mm)
6" 6"
(152.4 mm) (152.4 mm)
3-1/2" x 5"
180 Degree Center End (88.9 x 127 mm) Base Plate
Post Kit Post Kit 3/8" (9.5 mm) Thick
36" Post Kit 42" Post Kit
END POST KITS 180 DEGREE CENTER POST KITS

36" HEIGHT 42" HEIGHT GLASS 36" HEIGHT 42" HEIGHT GLASS
CAT. NO. CAT. NO. FITTING FINISH CAT. NO. CAT. NO. FITTING FINISH
P236EBS P242EBS Fixed Type Brushed Stainless P236CBS P242CBS Fixed Type Brushed Stainless
P236EPS P242EPS Fixed Type Polished Stainless P236CPS P242CPS Fixed Type Polished Stainless


• For Use With 1/2" (12 mm) Tempered Glass
• Glass Attachments Sold Separately
• Meets or Exceeds Code Standards BY C.R. LAURENCE

Powder Paint Finishes Also Available
CRL P4 Post Railing Kits are designed for commercial or
residential applications that meet or exceed guard rail and hand rail
code standards. These P4 Surface Mounted Post Railing Kits are Glass Attachments Below Must Be Ordered Separately (See page R623)
manufactured from Stainless Steel material designed to support Rigid Type Swivel Type
1-1/4" (31.8 mm) or 1-1/2" (38.1 mm) diameter Schedule 40
Horizontal Tubing. Kits are supplied complete with a Base Plate
and factory installed Swivel Bracket. Fixed or Swivel Glass Fittings
are sold separately (see page R623). See page R807 for more
information on P-Post Top Rail Installation Tool Kit. For screws
to attach the Top Rail to the Saddle specify Cat. No. PRS1032.
These 10-32 x 5/8" stainless steel screws come 50 per pack.
Minimum order is one pack.
2-1/8"
(53.9 mm)
Adjustable Railing Saddle
2-1/8"
(53.9 mm) Glass Fasteners 8-1/8"
Sold Separately (206.4 mm)
(see page R623)
8-1/8"
(206.4 mm)
Adjustable Swivel
Bracket
37-1/2"
(952.5 mm) 2-3/8" x 3/8" 43-1/2"
(60.3 x 9.5 mm) (1104.9 mm)
Flat Bar
20-5/8"
(523.9 mm)
26-5/8"
(676.3 mm)
Glass Fasteners
Sold Separately
(see page R623)
8-13/16" Adjustable Swivel

(223.8 mm) Bracket 8-13/16"
(223.8 mm)
3-1/2" x 5"
End 180 Degree Center (88.9 x 127 mm) Base Plate
Post Kit Post Kit 3/8" (9.5 mm) Thick
36" HEIGHT 42" HEIGHT 36" HEIGHT 42" HEIGHT
CAT. NO. CAT. NO. FINISH CAT. NO. CAT. NO. FINISH
P436EBS P442EBS Brushed Stainless P436CBS P442CBS Brushed Stainless
P436EPS P442EPS Polished Stainless P436CPS P442CPS Polished Stainless


• Designed to Accept 1/2" (12 mm) Tempered Glass
• Available With Swivel or Fixed Glass Fittings
42" (1067 mm)
• Custom Post Heights Also Available
CRL’s Surface Mounted Post Railing Kits are manufactured from
Schedule 40 1.9" (48.2 mm) diameter Stainless Steel Tubing, and are
designed for guard rail or hand rail applications. Saddles support 1-1/4"
or 1-1/2" (31.8 or 38.1 mm) Schedule 40 Hand Rail Tubing. Kits are supplied
complete with a Base Plate, Welded Top Saddle, and Glass Fittings attached
to the post at the factory. See page R807 for more information on P-Post
Top Rail Installation Tool Kit. For screws to attach the Top Rail to the
Saddle specify Cat. No. PRS1032. These 10-32 x 5/8" stainless steel
screws come 50 per pack. Minimum order is one pack.
4" 1-3/4"
(101.6 mm) (44.4 mm)
Railing Saddle
1-3/4" 4"
(44.4 mm) (101.6 mm)
RB50F/RB50S
Glass Mount
Fittings
40-9/16"
34-9/16" (1030.3 mm)
(877.9 mm)
28-13/16"
1.9" (48.2 mm) (731.8 mm)
22-13/16" Round Post
(579.4 mm)
End 180 Degree Center 135 Degree Angle 90 Degree Corner
Post Kit Post Kit Post Kit Post Kit
38-13/16"
(985.8 mm)
32-13/16"
(833.4 mm)
RB50F/RB50S
Glass Mount
1-7/8" Fittings
(47.6 mm) 6" 6"
(152.4 mm) (152.4 mm)
CL 4-3/4" (120.6 mm)
Diameter x 3/8" (9.5 mm)
Thick Base Flange With Cover
3" 3"
CL (76.2 mm) 1-1/8" (76.2 mm) CL 36" Post Kit 42" Post Kit
(28.6 mm)
CAT. NO. CAT. NO. FITTING TYPE FINISH CAT. NO. CAT. NO. FITTING TYPE FINISH
P7F36EBS P7F42EBS Fixed Fitting Brushed Stainless P7F36CBS P7F42CBS Fixed Fitting Brushed Stainless
P7S36EBS P7S42EBS Swivel Fitting Brushed Stainless P7S36CBS P7S42CBS Swivel Fitting Brushed Stainless
P7F36EPS P7F42EPS Fixed Fitting Polished Stainless P7F36CPS P7F42CPS Fixed Fitting Polished Stainless
P7S36EPS P7S42EPS Swivel Fitting Polished Stainless P7S36CPS P7S42CPS Swivel Fitting Polished Stainless
90 DEGREE CORNER POST KITS 135 DEGREE ANGLE POST KITS

P7F36LBS P7F42LBS Fixed Fitting Brushed Stainless P7F36ABS P7F42ABS Fixed Fitting Brushed Stainless
P7S36LBS P7S42LBS Swivel Fitting Brushed Stainless P7S36ABS P7S42ABS Swivel Fitting Brushed Stainless
P7F36LPS P7F42LPS Fixed Fitting Polished Stainless P7F36APS P7F42APS Fixed Fitting Polished Stainless
P7S36LPS P7S42LPS Swivel Fitting Polished Stainless P7S36APS P7S42APS Swivel Fitting Polished Stainless


• Designed to Accept 1/2" (12 mm) Tempered Glass
• Available With Swivel or Fixed Glass Fittings
• Standard Post Heights Are 36" (914 mm) MANUFACTURED IN THE USA
and 42" (1067 mm) BY C.R. LAURENCE


These innovative Post Railing Kits can be used for guard rail
or hand rail applications. CRL’s Surface Mounted Post Railing Kits
are manufactured from 1/2" x 2" (12.7 x 50.8 mm) Stainless Steel
Flat Bars. Saddles support 1-1/4" or 1-1/2" (31.8 or 38.1 mm)
Schedule 40 Hand Rail Tubing. Kits are supplied complete with a
Base Plate, Welded Top Saddle, and Glass Fittings attached to the
post at the factory. See page R807 for more information on P-Post
Top Rail Installation Tool Kit. For screws to attach the Top Rail to
the Saddle specify Cat. No. PRS1032. These 10-32 x 5/8" stainless
steel screws come 50 per pack. Minimum order is one pack.
4" 1-1/4"
(101.6 mm) (31.8 mm)
Railing Saddle
1-1/4" 4" RB50F/RB50S

(31.8 mm) (101.6 mm) Glass Mount
Fittings
1/2"
(12.7 mm)
40-9/16"
(1030.3 mm)
34-9/16"
(877.9 mm)
1/2"
2-1/2"
(12.7 mm)
2-1/2" (63.5 mm)
(63.5 mm)
End 180 Degree Center 135 Degree Angle 90 Degree Corner 2" x 1/2" 29-5/16"
Post Kit Post Kit Post Kit Post Kit (50.8 x 12.7 mm) (744.5 mm)
3" Thick Flat Bar
(76.2 mm) 23-5/16"
(592.1 mm) RB50F/RB50S
Glass Mount
Fittings
1-7/8"
(47.6 mm) 6" 6"
(152.4 mm) (152.4 mm)
CL
3-1/2" x 5-1/2"
(88.9 mm x 139.7 mm)
3-1/2" 3-1/2" 3/8" (9.5 mm) Thick Base Plate
CL (88.9 mm) 2" (88.9 mm) C
L 36" Post Kit 42" Post Kit
(50.8 mm)
P8F36EBS P8F42EBS Fixed Fitting Brushed Stainless P8F36CBS P8F42CBS Fixed Fitting Brushed Stainless
P8S36EBS P8S42EBS Swivel Fitting Brushed Stainless P8S36CBS P8S42CBS Swivel Fitting Brushed Stainless
P8F36EPS P8F42EPS Fixed Fitting Polished Stainless P8F36CPS P8F42CPS Fixed Fitting Polished Stainless
P8S36EPS P8S42EPS Swivel Fitting Polished Stainless P8S36CPS P8S42CPS Swivel Fitting Polished Stainless

P8F36LBS P8F42LBS Fixed Fitting Brushed Stainless P8F36ABS P8F42ABS Fixed Fitting Brushed Stainless
P8S36LBS P8S42LBS Swivel Fitting Brushed Stainless P8S36ABS P8S42ABS Swivel Fitting Brushed Stainless
P8F36LPS P8F42LPS Fixed Fitting Polished Stainless P8F36APS P8F42APS Fixed Fitting Polished Stainless
P8S36LPS P8S42LPS Swivel Fitting Polished Stainless P8S36APS P8S42APS Swivel Fitting Polished Stainless

CRL GLASS CONNECTORS Contact CRL Tech Sales for complete planning
CRL Double Arm Glass Fittings for new CL

1-7/8"
(47.6 mm)
Post or Flat Surface Mounting CL of glass
• Designed for Railings, Canopies,

Awnings, and Other Applications
• Complete With Hardware to Mount
to Post, Column or Wall 2"
(51 mm)
• Designed for Straight or Segmented Applications
• Stainless Steel Construction for Durability
• Compact Design for Minimal Obstruction
Double Arm Glass Fitting Set
This ingenious Double Arm Glass Fitting can be used to mount
1/2" (12 mm) tempered glass to posts, walls, glass fins, and canopy
brackets. The compact attachment portion offers minimal obstruction
to the glass, and you can choose from either a fixed or swiveling mount.
Glass fabrication is limited to only one 3/4" (19 mm) hole per mount.
Two stainless finishes are available, brushed and polished. Comes
with two 3/8"-16 x 13/16" (20.6 mm) and one 3/8"-16 x 1-1/4" (31.8 mm)
stainless steel threaded studs.
new
Wrench to tighten
Swivel Nut
CAT. NO. SNW3
Swivel Fitting Fixed Fitting
Designed for segment Designed for mounting

applications. Each swivel to 1-1/2" (38 mm)
fitting is adjustable up to Schedule 40 Post,
8 degrees. Column, or Flat Wall.
SWIVEL FITTING SET FIXED FITTING SET

SPECIFICATIONS:
For Use With 1/2" (12 mm) Tempered Glass CAT. NO. FINISH CAT. NO. FINISH
(Do not use with raw or annealed glass) RB50SBS Brushed Stainless RB50FBS Brushed Stainless
Glass Fabrication: RB50SPS Polished Stainless RB50FPS Polished Stainless
One 3/4" (19 mm) Diameter Hole Per Fitting Minimum order: 1 each. Finishes can be combined for quantity pricing. Minimum order: 1 each. Finishes can be combined for quantity pricing.
Comes with Bracket

Designed for 1-1/2"
(38.1 mm) Schedule
40 1.9" (48.3) O.D.
Post Mount
Canopy or Awning Bracket Application Post Mount Application Wall Mount Application

CRL P6 Series Spider Post Railing Kits MANUFACTURED IN THE USA

1-3/4"
• Designed to Accept 1/2" (12 mm) Tempered Glass BY C.R. LAURENCE
(44.4 mm)
• Glass Attachments Sold Separately Railing Saddle
1-3/4"
• Two Standard Stainless Finishes, With Custom (44.4 mm)
6-15/16"
Powder Paint Finishes Also Available Glass Fasteners
(176.2 mm)
Sold Separately
• Standard Post Heights Are 36" (914 mm) (see page R623)
and 42" (1067 mm) 6-15/16"
(176.2 mm)
• Custom Post Heights Available on Special Order 1-1/4" (31.8 mm)
Standoff 40-9/16"
CRL P6 Spider Post Railing Kits are manufactured from 34-9/16" (1030.3 mm)
Assembly
Schedule 40 1.9" (48.2 mm) diameter Stainless Steel Tubing, (877.9 mm)
and are designed for guard rail or hand rail applications to support 1.9" (48.2 mm)
1-1/4" (31.8 mm) or 1-1/2" (38.1 mm) diameter Horizontal Tubing. Round Post 23-7/16"
Kits are supplied complete with a Base Plate, Welded Top Saddle, (595.3 mm)
17-7/16" Glass Fasteners
and factory mounted Fixed Glass Spider Fittings. See page R807 (442.9 mm) Sold Separately
for more information on P-Post Top Rail Installation Tool Kit. (see page R623)
For screws to attach the Top Rail to the Saddle specify Cat. No.
PRS1032. These 10-32 x 5/8" stainless steel screws come 50 1-1/4" (31.8 mm)
per pack. Minimum order is one pack. Standoff
Assembly
Glass Attachments Below Must Be Ordered Separately (See page R623) 8-7/16" 8-7/16"
Rigid Type Swivel Type (214.3 mm) (214.3 mm)
4-3/4" (120.6 mm)
Diameter x 3/8" (9.5 mm)
Thick Base Flange With Cover
Flange and Cover
4-7/16"
(112.7 mm)
1-1/4" (31.7 mm)
Standoff Welded to Post
Included.
CRL Spider
1-9/16" Fitting Included.
(39.7 mm)
End 180 Degree Center 135 Degree Angle 90 Degree Corner 4-3/4"
Post Kit Post Kit Post Kit Post Kit (120.6 mm)

P636EBS P642EBS Brushed Stainless P636CBS P642CBS Brushed Stainless
P636EPS P642EPS Polished Stainless P636CPS P642CPS Polished Stainless

P636LBS P642LBS Brushed Stainless P636ABS P642ABS Brushed Stainless
P636LPS P642LPS Polished Stainless P636APS P642APS Polished Stainless

CRL GLASS RAILING SPIDER FITTINGS Contact CRL Tech Sales for complete planning
CRL Glass Railing new

Spider Fittings
• Spiders for Mounting to Posts, Walls
or Fins
• Reduced in Size for Interior Dividers,
Displays, and Hand Railing Applications
• For Use With 3/8" or 1/2" (10 or 12 mm)
Tempered Glass
• Designed for the 'All-Glass' Look
• Rigid or Swivel Countersunk or Cap
Glass Attachments Available
• Made of 316 Alloy Stainless Steel in Two
Attractive Finishes: Brushed and Polished
We have expanded our line of Glass Railing Spider Fittings

for use in interior or exterior dividers, displays, and hand railing
applications. CRL now stocks nine designs that can be
incorporated into these systems. We have one, two, and four
arm fittings that can be mounted to railing posts, structural walls
or fins.
We offer two types of Combination Glass Attachments (see
page R623) that can be used for any of these fittings. The Rigid
Combination Attachment can be used for both countersunk
(flush) mounting and cap (standard hole) mounting. This rigid Only a Sample of Our Extensive Line...
head fastener would be used in areas where movement of the
glass (deflection) needs to be minimized. The Swivel
Combination Attachment can also be used for both countersunk
(flush) mounting and cap (standard hole) mounting. This swivel
head fastener allows for 6 degrees of rotation in any direction,
which can be used in segmented radius applications or in areas
where the glass will get a small amount of dynamic loading.
All CRL Spider Fittings and Glass Attachment are made of
316 Alloy Stainless Steel to provide a virtually maintenance free
design and beautiful finish to complement most any décor.

CRL GLASS RAILING SPIDER FITTINGS For Pricing on CRL Products, Call Toll Free
NOTE: Either the Rigid Head or Swivel Head Combination Glass Attachments below can be used with all of our Glass Railing Spider Fittings.
CRL Rigid Head Combination CRL Swivel Head Combination

Glass Attachment Glass Attachment
new new
The Rigid Head Attachments allow for a secure attachment and The head of the Swivel Glass Attachment can tilt up to 6 degrees
minimize the deflection of the glass panels. This type of fitting is in any direction on its ball and socket joint. This allows for any
typically used only for interior applications. stress applied to the glass to be more evenly distributed across the
entire panel of glass rather than concentrating at the hole. These
are typically used in conditions where the glass will be subject to
One Fitting for Either Flush or Surface Mount Installations live loads.
One Fitting for Either Flush or Surface Mount Installations
Flush Mount Cap Mount Flush Mount Cap Mount

(Countersunk hole in glass) (Standard hole through glass) (Countersunk hole in glass) (Standard hole through glass)
Our special Rigid Head Combination Glass Attachment Fittings The Swivel Head Fitting also employs our special Combination Glass
can be used for 'flush' mounting for a smooth exterior surface when Attachment design so it can be used for 'flush' mounting for a smooth
the glass is fabricated with a countersunk hole. This same Fitting exterior surface when the glass is fabricated with a countersunk hole.
can be used for the 'cap' type of mounting when using the supplied This same Fitting can be used for the 'cap' type of mounting when
adaptor washer. This requires just a standard hole in the glass. using the supplied adaptor washer. This requires just a standard hole
in the glass.
90 90
Degrees Degrees
15/16" 1-1/4"
(24 mm) (32 mm)
11/16" 3/4" 1-1/16" 1-1/16"

(17 mm) (19 mm) (27 mm) (27 mm)
Flush mount glass fabrication * Cap mount glass fabrication Flush mount glass fabrication * Cap mount glass fabrication
* We suggest when using the flush * We suggest when using the flush
CAT. NO. FINISH CAT. NO. FINISH
mount method that you give your mount method that you give your
RRF10BS Brushed Stainless glass fabricator a sample Flush Mount RSF10BS Brushed Stainless glass fabricator a sample Flush Mount
RRF10PS Polished Stainless Glass Attachment to ensure a proper RSF10PS Polished Stainless Glass Attachment to ensure a proper
flush fit. flush fit.
Minimum order: 1 each. Finishes can be combined for Minimum order: 1 each. Finishes can be combined for
quantity pricing. quantity pricing.

CRL Spider Replacement Gasket CRL Spider Replacement Gasket

Set for Rigid Glass Attachment Set for Swivel Glass Attachment
Replacement Gasket Set includes parts required for Countersunk Replacement Gasket Set includes parts required for Countersunk
or Surface Mount Attachments. Minimum order is one each. or Surface Mount Attachments. Minimum order is one each.
CAT. NO. FINISH CAT. NO. FINISH
RRF10RW Black Plastic RSF10RW Black Plastic
CRL Replacement Stud Set for CRL Replacement Stud Set for Fin
Post Mounted Spider Fittings Mounted Spider Fittings
Replacement Stud Set includes parts required for Fin Mounted

Replacement Stud Set includes parts required for Post Mounted Spider Fittings. Minimum order is one each.
Spider Fittings. Minimum order is one each.
CAT. NO. FINISH
CAT. NO. FINISH M10SETBS Brushed Stainless
MS14SET Stainless Steel M10SETPS Polished Stainless
CRL Post Adapters Adapters are to be welded to Posts, 3/8"

and are drilled and tapped to accept (9.5 mm)
• Designed for Round or Flat Posts mounting hardware supplied with
Spider Fittings.
• 3/8" (9.5 mm) Deep Threaded 3/8"
CAT. NO. FINISH FOR USE ON
Hole to Provide for Proper (9.5 mm)
SPA01SS Mill Stainless Flat-Sided Posts
Attachment Requirements SPA02SS* Mill Stainless Round Posts
for Spider Fitting to Post Minimum order: 1 each. * For use with 1-1/2" (38.1 mm) to 2"
(50.8 mm) outside diameter posts.
CRL Single Arm new

Post Mounted Fitting
• Complete With Hardware to
Mount to Post
This Post Mounted Fitting is used to attach a single
glass panel to a structural end post. Comes with two Glass Attachments Below Must Be 2-3/8" (60 mm)
Ordered Separately (See page R623)
types of attachment hardware: a M14-2 x 101 mm (4")
threaded stud with three matching nuts and washers; a
M14-2 x 30.2 mm (1-3/16") stainless steel threaded stud Rigid Type 1-3/8"
for use with CRL Post Adaptors shown above. (35 mm)
For companion fitting use Cat. No. GRP2BS or
GRP2PS Fittings.
5/8" (16 mm)
Swivel Type
5/8" (16 mm) 3/8"
(10 mm)
CAT. NO. FINISH
GRP1BS Brushed Stainless
GRP1PS Polished Stainless
Minimum order: 1 each. All Spider Fittings can be combined for quantity pricing. M14 1-9/16" (40 mm)

CRL Double Arm

Post Mounted Fitting new
Mount to Post
This Post Mounted Fitting is used to attach
two inline glass panels to a structural center
post. Comes with two types of attachment
hardware: a M14-2 x 101.6 mm (4") stainless
Glass Attachments Below Must Be 3/8"
steel threaded stud with three matching nuts Ordered Separately (See page R623) (10 mm)
1-9/16"
and washers; a M14-2 x 30.2 mm (1-3/16") (40 mm)
stainless steel threaded stud for use with CRL 5/8" 5/8"
Post Adaptors shown on page R624. See page Rigid Type (16 mm) (16 mm)
R624 for a Replacement Stud Set.
For a companion fitting use Cat. No. M14
GRP1BS or GRP1PS Fittings.
4-3/4" (120 mm)

Swivel Type
2-3/8"
CAT. NO. FINISH 1-3/8" (60 mm)
1-3/8"
GRP2BS Brushed Stainless (35 mm) (35 mm)
Minimum order: 1 each. All Spider Fittings can be combined for quantity pricing.
CRL Single Long Arm

• Longer Arm to Match "V" Fitting Arms
Mount to Post
This Post Mounted Fitting is used to attach
a single glass panel to a structural end post.
Comes with two types of attachment hardware:
a M14-2 x 101.6 mm (4") stainless steel 3-5/16"
threaded stud with three matching nuts and Glass Attachments Below Must Be (84.9 mm)
washers; a M14-2 x 30.2 mm (1-3/16")
stainless steel threaded stud for use with CRL
Post Adaptors shown on page R624. See page Rigid Type 1-3/8"
R624 for a Replacement Stud Set. (35 mm)
For a companion fitting use Cat. No.
GRP2VBS, GRP2VPS, GRP4BS, or
GRP4PS Fittings.
3/8"
(10 mm)
Swivel Type
5/8"
(16 mm)
5/8"
(16 mm)
CAT. NO. FINISH

M14 1-9/16"
GRP1LBS Brushed Stainless (40 mm)
GRP1LPS Polished Stainless

CRL Double Arm "V"

• Classic "V" Look
Mount to Post
This Post Mounted Fitting is used to attach a
single glass panel to a structural end post, or
two inline glass panels to a structural center
post. Comes with two types of attachment 4-3/4"
(120 mm)
hardware: a M14-2 x 101.6 mm (4") stainless
steel threaded stud with three matching nuts 2-3/8" 2-3/8"
Glass Attachments Below Must Be (60 mm) (60 mm)
and washers; a M14-2 x 30.2 mm (1-3/16") Ordered Separately (See page R623)
Post Adaptors shown on page R624. See
page R624 for a Replacement Stud Set. Rigid Type
For companion fitting use Cat. No. 2-3/8"
GRP1LBS or GRP1LPS Fittings. (60 mm)
3-5/16"
(84.9 mm)
1-3/8" 5/8"
(35 mm) (16 mm)
Swivel Type
1-3/8"
3/8" (35 mm)
(10 mm)
CAT. NO. FINISH 1-9/16"
Brushed Stainless 5/8" (40 mm)
GRP2VBS
GRP2VPS Polished Stainless (16 mm)
Minimum order: 1 each. All Spider Fittings can be combined for
quantity pricing. M14
CRL Four Arm "V"

Post Mounted Fitting
new
Mount to Post
This Post Fitting is used to attach two
inline glass panels to a structural center 4-3/4"
post. Comes with two types of attachment (120 mm)
hardware: a M14-2 x 101.6 mm (4") stainless 2-3/8" 2-3/8"
steel threaded stud with three matching nuts Glass Attachments Below Must Be
Ordered Separately (See page R623) (60 mm) (60 mm)
and washers; a M14-2 x 30.2 mm (1-3/16")
Post Adaptors shown on page R624. See page Rigid Type
R624 for a Replacement Stud Set. 4-3/4"
For companion fitting use Cat. No. GRP2VBS (120 mm)
or GRP2VPS Fittings. 7/16" 5/8"
(10.5 mm) (16 mm)
5/8" 1-3/8"
Swivel Type (16 mm) (35 mm)
3/8" 1-3/8"
(10 mm) (35 mm)
CAT. NO. FINISH
5/8"
GRP4BS Brushed Stainless (16 mm)
Minimum order: 1 each. All Spider Fittings can be combined for
quantity pricing. M14

CRL Single Arm Wall/Fin

Mounted Fitting
• Compact Design for new
Minimal Obstruction
Mount to Wall or Structural Fin 4-5/16"
(110 mm)
2-11/16"
This Wall/Fin Mounted Fitting is used to (68.3 mm)
attach a single glass panel to a wall or structural 11/16"
fin. Comes with two M10-1.5 x 59 mm (2-5/16") 7/16" (17.5 mm)
(11 mm)
stainless steel threaded studs and two matching
cap nuts with washers. See page R624 for a
Replacement Stud Set. 3/8"
7/8"
For companion fitting use Cat. No. GRF2BS Glass Attachments Below Must Be (22 mm) (10 mm)
or GRF2PS Fittings. Ordered Separately (See page R623)
Rigid Type 1/4"

(6 mm)
2-3/16"
(55 mm)
13/16"
(20 mm)
1-3/8"
(35 mm)
Swivel Type
1-3/8"
(35 mm)
CAT. NO. FINISH 2-9/16" 3/8"
GRF1BS Brushed Stainless (65 mm) (10 mm)
GRF1PS Polished Stainless 13/16"
Minimum order: 1 each. All Spider Fittings can be combined for quantity pricing. (20 mm)
CRL Double Arm Wall/Fin

Mounted Fitting new
• Compact Design for Minimal
Obstruction
Mount to Wall or Structural Fin
This Wall/Fin Mounted Fitting is used to attach 2-3/16"
(55 mm)
two inline glass panels to a structural fin. Comes 1/4"
with two M10-1.5 x 59 mm (2-5/16") stainless Glass Attachments Below Must Be (6 mm)
steel threaded studs and four matching cap nuts
with washers. See page R624 for a Replacement
Stud Set. Rigid Type
For a companion fitting use Cat. No. GRF1BS
or GRF1PS Fittings.
13/16" 1-3/8"
(20 mm) (35 mm)
4-5/16"
(110 mm)
Swivel Type 2-11/16"
(68 mm)
1-3/8" 2-9/16"
(35 mm) (65 mm)
11/16"
CAT. NO. FINISH 7/16"
(17.5 mm)
7/8"
GRF2BS Brushed Stainless (11 mm) (22 mm)
GRF2PS Polished Stainless
3/8"

CRL Double Arm "V"

Wall/Fin Mounted Fitting
• Classic "V" Look new
This Wall/Fin Mounted Fitting is used to
attach a single glass panel to a wall or
structural fin. Comes with two M10-1.5 x 59
mm (2-5/16") stainless steel threaded studs 1/4"
and two matching cap nuts with washers. (6 mm)
See page R624 for a Replacement Stud Set.
2-3/16" 7/16"
For companion fitting use Cat. No. (55 mm) (11 mm)
GRF4BS or GRF4PS Fittings.
Glass Attachments Below Must Be 1-3/8" 7/8"
Ordered Separately (See page R623) (35 mm) (22 mm)
5"
Rigid Type (127 mm)
13/16"
(20 mm)
5-1/2"
(140 mm)
11/16" 7/8"
(17.5 mm) 3-7/8"
(22 mm)
(98 mm)
Swivel Type
1-3/8" 7/16"
(35 mm) (11 mm)
CAT. NO. FINISH
2-9/16"
GRF2VBS Brushed Stainless (65 mm) 3/8"
GRF2VPS Polished Stainless (10 mm)
CRL Four Arm "V"

Wall/Fin Mounted Fitting
new
This Wall/Fin Mounted Fitting is used to
attach two inline glass panels to a structural
center fin. Comes with two M10-1.5 x 59 mm Ø13/16"
(2-5/16") stainless steel threaded studs and (Ø20 mm)
four matching cap nuts with washers. See
7/16"
page R624 for a Replacement Stud Set. 2-3/16" (11 mm)
Glass Attachments Below Must Be
For companion fitting use Cat. No. Ordered Separately (See page R623) (55 mm)
1/4"
GRF2VBS or GRF2VPS Fittings. (6 mm)
Rigid Type
1-3/8" 7/8"
(35 mm) 5" (22 mm)
(127 mm)
5-1/2"
(140 mm)
11/16" 3-7/8" 7/8"
Swivel Type (17.5 mm) (98 mm) (22 mm)
1-3/8" 7/16"
CAT. NO. FINISH (35 mm) (11 mm)
GRF4BS Brushed Stainless 2-9/16"
GRF4PS Polished Stainless (65 mm) 3/8"

CRL SPIDER FITTINGS For Pricing on CRL Products, Call Toll Free
• For Use With 3/8" to 13/16" new

(10 to 20 mm) Tempered Glass
• Spiders for Mounting to Posts, Walls or Fins
• Designed for the 'All-Glass' Look
• New Combination Glass Attachments – Same
Attachment Can Be Used for Flush Mount or
Cap Mount Applications – Rigid Head and
Swivel Head Styles Available
• Made of 316 Alloy Stainless Steel in Two

Attractive Finishes: Brushed or Polished
CRL now stocks fourteen designs of Spider Fittings that can

be incorporated into architectural systems. We have one, two,
and four arm fittings that can be mounted to railing posts,
structural walls or fins.
We offer two types of Combination Glass Attachments (see
page R623) that can be used for any of these fittings. The Rigid
Combination Attachment can be used for both countersunk
(flush) mounting and cap (standard hole) mounting. This rigid
head fastener would be used in areas where movement of the
glass (deflection) needs to be minimized. The Swivel
Combination Attachment can also be used for both countersunk
(flush) mounting and cap (standard hole) mounting. This swivel
head fastener allows for 6 degrees of rotation in any direction,
which can be used in segmented radius applications or in areas
where the glass will get a small amount of dynamic loading.
All CRL Spider Fittings and Glass Attachments are made of
316 Alloy Stainless Steel to provide a virtually maintenance free
design and beautiful finish to complement most any décor.

CRL GLASS CLAMP POST SYSTEMS Contact CRL Tech Sales for complete planning
CRL Glass Clamp Post Kits

(Not Designed for Guard Rail Applications)
• Square or Round Z-Series Glass Clamps

• Ready to Install for Both Commercial BY C.R. LAURENCE

and Residential Applications

• Designed to Accept 1/2" (12 mm) new
Tempered Glass
• Standard Post Heights Are 36"
(914 mm) and 42" (1067 mm)
• Two Standard Stainless Finishes
• Custom Powder Paint Finishes Also Available
Factory
Welded
End Cap
6"
(152.4 mm)
CL
Round Clamp
End Post Kit 180 Degree 135 Degree 90 Degree 1.9"
Center Post Kit Center Post Kit Corner Post Kit Post (48.2 mm)
Height Diameter
Post
CRL's Glass Clamp Post Kits are manufactured from Schedule 40

1.9" (48.2 mm) diameter Stainless Steel Tubing. Kits are supplied
complete with a Base Plate, Base Plate Cover Canopy, Welded Top
Cap, and Z-Series Glass Clamps factory attached to the Post. NOTE:
CRL's Glass Clamp Post Kits are not designed for guard rail or hand CL Standard
rail applications. 6" Flange and
Square Clamp (152.4 mm) Cover Canopy
CAT. NO. CAT. NO. CLAMP TYPE FINISH CAT. NO. CAT. NO. CLAMP TYPE FINISH
PR36EBS PR42EBS Round Brushed Stainless PR36CBS PR42CBS Round Brushed Stainless
PS36EBS PS42EBS Square Brushed Stainless PS36CBS PS42CBS Square Brushed Stainless
PR36EPS PR42EPS Round Polished Stainless PR36CPS PR42CPS Round Polished Stainless
PS36EPS PS42EPS Square Polished Stainless PS36CPS PS42CPS Square Polished Stainless
Minimum order: 1 each. Sizes and finishes can be combined for quantity pricing. Minimum order: 1 each. Sizes and finishes can be combined for quantity pricing.
90 DEGREE CORNER POST KITS 135 DEGREE CENTER POST KITS

CAT. NO. CAT. NO. CLAMP TYPE FINISH CAT. NO. CAT. NO. CLAMP TYPE FINISH
PR36LBS PR42LBS Round Brushed Stainless PR36ABS PR42ABS Round Brushed Stainless
PS36LBS PS42LBS Square Brushed Stainless PS36ABS PS42ABS Square Brushed Stainless
PR36LPS PR42LPS Round Polished Stainless PR36APS PR42APS Round Polished Stainless
PS36LPS PS42LPS Square Polished Stainless PS36APS PS42APS Square Polished Stainless
Minimum order: 1 each. Sizes and finishes can be combined for quantity pricing. Minimum order: 1 each. Sizes and finishes can be combined for quantity pricing.

CRL GLASS CLAMPS For Pricing on CRL Products, Call Toll Free
CRL Mini Z-Series Glass Clamps CRL Mini Z-Series Glass Clamps
Round Shape – Radius Base Round Shape – Flat Base
• For 1/4" (6 mm) Thick Glass • For 1/4" (6 mm) Thick Glass
• Fits 1" (25 mm) Diameter Tubing • For Mounting to Flat Surfaces
• No Hole Drilling; Pressure Fit • No Hole Drilling; Pressure Fit
• Ideal for Small Glass Barriers • Ideal for Small Glass Barriers
1-1/16" 1-1/16"
(27 mm) (27 mm)
11/32" 7/16"
(8.7 mm) (11 mm)
19/32" 1-5/32" 19/32" 1-5/32"
(15 mm) (29.5 mm) (15 mm) (29.5 mm)
Base View Front View Rear View Side View Base View Front View Rear View Side View
CAT. NO. FINISH BASE METAL GLASS THICKNESS CAT. NO. FINISH BASE METAL GLASS THICKNESS
ZMR06PS Polished Stainless Stainless Steel 1/4" (6 mm) ZMF06PS Polished Stainless Stainless Steel 1/4" (6 mm)
ZMR06SS Satin Stainless Stainless Steel 1/4" (6 mm) ZMF06SS Satin Stainless Stainless Steel 1/4" (6 mm)
Minimum order: 1 each. All Z-Series Clamps can be combined for quantity pricing. Minimum order: 1 each. All Z-Series Clamps can be combined for quantity pricing.
CRL Z-Series Small Square Glass Clamps CRL Z-Series Large Square Glass Clamps
• May be Used on Radius or Flat Surfaces • May be Used on Radius or Flat Surfaces
Glass Fabrication: 1/2" (12 mm) Diameter Hole Required if Using Provided Steel Pin Glass Fabrication: 1/2" (12 mm) Diameter Hole Required if Using Provided Steel Pin
CL CL
1-3/4" 2-1/8" 9/16"
(44 mm) 9/16"
(14 mm) (54 mm) (14 mm)
5/8" 7/8" 1"
9/16" (22 mm) (25 mm)
29/32" 1-3/4" (14 mm) (15.9 mm)
(23 mm) (44 mm) 1-3/32" 2-1/8"
(27.7 mm) (54 mm)
Z130BR Brass Zinc Casting 1/4" to 5/16" (6 to 8 mm) Z135BR Brass Zinc Casting 3/8" (10 mm)
Z130CH Chrome Zinc Casting 1/4" to 5/16" (6 to 8 mm) Z135CH Chrome Zinc Casting 3/8" (10 mm)
Z130SC Satin Chrome Zinc Casting 1/4" to 5/16" (6 to 8 mm) Z135SC Satin Chrome Zinc Casting 3/8" (10 mm)
Z130BN Brushed Nickel Zinc Casting 1/4" to 5/16" (6 to 8 mm) Z135BN Brushed Nickel Zinc Casting 3/8" (10 mm)
Z130GP Gold Plated Zinc Casting 1/4" to 5/16" (6 to 8 mm) Z135GP Gold Plated Zinc Casting 3/8" (10 mm)
Z130W White Zinc Casting 1/4" to 5/16" (6 to 8 mm) Z135W White Zinc Casting 3/8" (10 mm)
Z150PS Polished Stainless Stainless Steel 1/4" to 5/16" (6 to 8 mm) Z155PS Polished Stainless Stainless Steel 3/8" (10 mm)
Z150SS Satin Stainless Stainless Steel 1/4" to 5/16" (6 to 8 mm) Z155SS Satin Stainless Stainless Steel 3/8" (10 mm)
CRL Z-Series Large Round Glass CRL Z-Series Large Round Glass
Clamps for 1/4" (6 mm) Glass Clamps for 3/8" (10 mm) Glass
• May be Used on Radius or Flat Surfaces • May be Used on Radius or Flat Surfaces
CL CL
2-1/8" 23/32" 2-1/8" 25/32"
(54 mm) (18 mm) (54 mm) (19.8 mm)
23/32" 13/16" 23/32" 27/32"
(18 mm) (20.6 mm) (18 mm) (21.4 mm)
15/16" 2-1/4" 1-3/32" 2-1/4"
(23.8 mm) (57 mm) (27.8 mm) (57 mm)
Glass Glass
Z106BR Brass Zinc Casting 1/4" (6 mm) Fabrication: Z110BR Brass Zinc Casting 3/8" (10 mm) Fabrication:
Z106CH Chrome Zinc Casting 1/4" (6 mm) 1/2" (12 mm) Z110CH Chrome Zinc Casting 3/8" (10 mm) 1/2" (12 mm)
Z106SC Satin Chrome Zinc Casting 1/4" (6 mm) Diameter Hole Z110SC Satin Chrome Zinc Casting 3/8" (10 mm) Diameter Hole
Z106BN Brushed Nickel Zinc Casting 1/4" (6 mm) Required if Z110BN Brushed Nickel Zinc Casting 3/8" (10 mm) Required if
Z106GP Gold Plated Zinc Casting 1/4" (6 mm) Using Provided Z110GP Gold Plated Zinc Casting 3/8" (10 mm) Using Provided
Z106W White Zinc Casting 1/4" (6 mm) Steel Pin Z110W White Zinc Casting 3/8" (10 mm) Steel Pin

CRL GLASS CLAMPS Contact CRL Tech Sales for complete planning
CRL Z-Series Round Type Radius Base Glass Clamps

SPECIFICATIONS:
Glass Thicknesses: Models for 1/4" to 1/2" (6 to 12 mm).
Base Design: Radius.
For Use With: 1-1/2" or 2" (38.1 or 50.8 mm)
Diameter Round Tubing.
Material: Choice of Zinc Constructed or Stainless Steel.
Stainless Steel or Powder Painted Zinc Clamps are
recommended for more durability in exterior applications.
Glass Fabrication:
For 1/4" (6 mm), 5/16" (8 mm), and 3/8" (10 mm) Thick Glass:
1/2" (12 mm) diameter hole required if using provided steel pin
for glass support.
For 1/2" (12 mm) Thick Glass: 9/16" (14 mm) diameter hole
required if using provided steel pin for glass support.
Includes: Rubber Gaskets and Steel Pin (for optional use)
with Grommet.
Models for Round Tubing Installations
For 1/4" (6 mm) and 5/16" (8 mm) Glass CAT. NO. FINISH TUBE DIA. BASE METAL
Z206BR Brass 2" (50.8 mm) Zinc Casting
Z206CH Chrome 2" (50.8 mm) Zinc Casting
CL Z206SC Satin Chrome 2" (50.8 mm) Zinc Casting
3/4"
Z206BN Brushed Nickel 2" (50.8 mm) Zinc Casting
2-1/8"
(19 mm) Z206GP Gold Plated 2" (50.8 mm) Zinc Casting
(54 mm)
Z206W White 2" (50.8 mm) Zinc Casting
23/32" Z306BS Brushed Stainless 2" (50.8 mm) Stainless Steel
(18.3 mm) Z306PS Polished Stainless 2" (50.8 mm) Stainless Steel
15/16" 2-1/4" Z15306BS Brushed Stainless 1-1/2" (38.1 mm) Stainless Steel
(23.6 mm) (56.9 mm) Z15306PS Polished Stainless 1-1/2" (38.1 mm) Stainless Steel
Base View Front View Rear View Side View Minimum order: 1 each. All Z-Series Clamps can be combined for quantity pricing.
For 3/8" (10 mm) Glass CAT. NO. FINISH TUBE DIA. BASE METAL
CL
Z210SC Satin Chrome 2" (50.8 mm) Zinc Casting
2-1/8" 3/4" Z210GP Gold Plated 2" (50.8 mm) Zinc Casting
(54 mm) (19 mm)
Z210W White 2" (50.8 mm) Zinc Casting
1-3/32" 2-9/32" Z15310BS Brushed Stainless 1-1/2" (38.1 mm) Stainless Steel
(27.7 mm) (58.1mm) Z15310PS Polished Stainless 1-1/2" (38.1 mm) Stainless Steel
For 1/2" (12 mm) Glass CAT. NO. FINISH TUBE DIA. BASE METAL
CL Z212SC Satin Chrome 2" (50.8 mm) Zinc Casting
2-1/8" 1-1/32" Z212GP Gold Plated Zinc Casting
(26.1 mm)
2" (50.8 mm)
(54 mm) Z212W White Zinc Casting
2" (50.8 mm)
1-7/32" 2-17/32" Z15312BS Brushed Stainless 1-1/2" (38.1 mm) Stainless Steel
(31.2 mm) (64.1 mm) Z15312PS Polished Stainless 1-1/2" (38.1 mm) Stainless Steel
CRL Z-Clamp Replacement Screws

CAT. NO. FINISH • 8 Screws
ZCS5X15BR Brass per Pack ZCS5X15
ZCS5X15CH Chrome Screw
ZCS5X15SS Stainless Steel
Minimum order: 1 pack.

CRL Z-Series Round Type Flat Base Glass Clamps

SPECIFICATIONS:
Base Design: Flat.
For Use With: Square Tubing or Other Flat Surfaces.
Glass Fabrication:
for glass support.
with Grommet.
Models for Flat Surface Installations

For 1/4" (6 mm) and 5/16" (8 mm) Glass
CAT. NO. FINISH BASE METAL
Z406BR Brass Zinc Casting
CL Z406CH Chrome Zinc Casting
3/4" Z406SC Satin Chrome Zinc Casting
2-1/8" (19 mm) Z406BN Brushed Nickel Zinc Casting
(54 mm) Z406GP Gold Plated Zinc Casting
23/32" Z406W White Zinc Casting
(18.3 mm) Z506BS Brushed Stainless Stainless Steel
15/16" 2-1/8" Z506PS Polished Stainless Stainless Steel
(23.6 mm) (54 mm)
Minimum order: 1 each. All Z-Series Clamps can be combined for quantity pricing.
Base View Front View Rear View Side View

2-1/8" (19 mm) Z410BN Brushed Nickel Zinc Casting
1-3/32" 2-1/8" Z510PS Polished Stainless Stainless Steel
(27.7 mm) (54 mm) Minimum order: 1 each. All Z-Series Clamps can be combined for quantity pricing.

1-1/32" Z412SC Satin Chrome Zinc Casting
2-1/8" (26.1 mm) Z412BN Brushed Nickel Zinc Casting
(31.2 mm) (58.7 mm)
CRL Heavy-Duty Thread-Setter Tool CRL 5/16"-18 Mandrel and Nosepiece

The CRL Heavy-Duty Thread-Setter The CRL 5/16"-18 Mandrel and Nosepiece
Tool is supplied with a 1/4"-20 Mandrel for Cat. No. 34604 Heavy-Duty Thread-Setter
and Nosepiece only. It will install 10-24, Tool allows for the installation of larger Rivet-
10-32, 1/4"-20, 5/16"-18, 3/8"-16, 5 mm, Nuts and Thread-Serts. This Mandrel and
6 mm, 8 mm, and 10 mm aluminum or Nosepiece is required for installation of the
steel Rivet-Nuts and Poly-Nuts. Cat. No. ZRNUT. Minimum order is one each.
Minimum order is one each. CAT. NO. 34604 CAT. NO. 34618

CRL Z-Series Square Type Radius Base Glass Clamps

SPECIFICATIONS:
Base Design: Radius.
For Use With: 2" (50.8 mm) Diameter Round Tubing only.
Glass Fabrication:
for glass support.
with Grommet.
For 1/4" (6 mm) and 5/16" (8 mm) Glass Models for Round Tubing Installations

CL Z606BR Brass Zinc Casting
Z606CH Chrome Zinc Casting
2-1/8" (19 mm)
(54 mm) Z606BN Brushed Nickel Zinc Casting
23/32" Z606GP Gold Plated Zinc Casting
(18.3 mm) Z606W White Zinc Casting
Z706BS Brushed Stainless Stainless Steel
(23.6 mm) (56.9 mm)

CL
2-1/8" (19 mm)
Z610GP Gold Plated Zinc Casting
23/32"
(27.7 mm) (58.1 mm) Minimum order: 1 each. All Z-Series Clamps can be combined for quantity pricing.

CL
1-1/32" Z612SC Satin Chrome Zinc Casting
2-1/8" (26.1 mm)
Z612GP Gold Plated Zinc Casting
23/32"
(18.3 mm)
Z612W White Zinc Casting
(31.2 mm) (64.1 mm) Minimum order: 1 each. All Z-Series Clamps can be combined for quantity pricing.
CRL Z-Clamp Attaching Bolt and Rivet-Nut

• For Securing Z-Series Clamps to Tubing
ZBOLT 5/16"-18x1" Stainless Steel Socket Head Cap Bolt (Undercut Head)
ZRNUT 5/16"-18 Rivet-Nut for use in Thin Wall Tubing (1/8" and Less) CAT. NO. CAT. NO.
Inserted Compressed
Minimum order: 1 each. ZBOLT ZRNUT

CRL Z-Series Square Type Flat Base Glass Clamps

SPECIFICATIONS:
Base Design: Flat.
For Use With: Square Tubing or Other Flat Surfaces.
Glass Fabrication:
for glass support.
with Grommet.
For 1/4" (6 mm) and 5/16" (8 mm) Glass Models for Flat Surface Installations

2-1/8" 3/4" Z806SC Satin Chrome Zinc Casting
(54 mm) (19 mm) Z806BN Brushed Nickel Zinc Casting
(23.6 mm) (54 mm)

CL
2-1/8" 3/4" Z810SC Satin Chrome Zinc Casting
(54 mm) (19 mm) Z810BN Brushed Nickel Zinc Casting
(27.7 mm) (54 mm)

2-1/8" 1-1/32" Z812SC Satin Chrome Zinc Casting
(54 mm) (26.1 mm) Z812BN Brushed Nickel Zinc Casting
(31.2 mm) (58.7 mm)
CRL Rivet-Nut Drill Bit

• High Speed 17/32" Drill
new
for Installing Our ZRNUT
Rivet-Nuts This High Speed Drill Bit is made of M-7 steel for high resistance to abrasion during
tough drilling applications. The three-flatted design provides better chuck grip and
• 1/2" Shank, 6" Length reduces slippage. Overall length is 6" (152 mm). Minimum order is one each. CAT. NO. 91134

3/8" Clamps
CRL Glass Clamps for Stair 25/64"
(10 mm)
and Walkway Railings Acute

A B
Obtuse
C
• Chrome, Brass, and Brushed Nickel Closed on Acute

Angle End
Angle Open
Both Ends
Closed on Obtuse
Angle End
Finishes for 3/8" or 1/2" (10 or 12 mm) A 41/64" (16.4 mm)
Thick Tempered Glass B
1/2" Clamps
D E 33/64"
• Custom Finishes Available on Request C
(13 mm)
C
Our Glass and Railing Clamps are predrilled and ready for use
in the construction of metal and glass railings, partitions, room dividers Reversible Closed Straight Open B
One End Both Ends
and more. Two sizes accommodate 3/8" or 1/2" (10 or 12 mm) thick
D E D A
tempered glass. Three popular finishes are stocked, with custom finishes
3/4" (19 mm)
available. Simply loosen screw on one end, insert glass edge and tighten. A: Acute End Clamp for Slanted Railings
Use CRL Tuff-Pak Tape (see page R557), to cushion glass in Clamps. B: Open Center Clamp for Slanted Railings
Drawings and templates for all Clamps are available online at C: Obtuse End Clamp for Slanted Railings
crlaurence.com. D E D
D: Straight End Clamp for Level Railings
E : Straight Open Center Clamp for Level
CRL 52 Degree Slant Acute End Clamp "A" Railings
CAT. NO. FINISH GLASS THICKNESS
1-7/8" Use Slant Acute End Clamps on top of glass RH3312BR Brass 1/2" (12 mm)
1-7/8"
(47 mm) at high end of slant, or bottom of glass at low
(47 mm) RH3338BR Brass 3/8" (10 mm)
end of slant. Clamps at 52 degree angle for use RH3312CH Chrome 1/2" (12 mm)
with 3/8" or 1/2" (10 or 12 mm) thick glass. RH3338CH Chrome 3/8" (10 mm)
RH3312BN Brushed Nickel 1/2" (12 mm)
7/16" RH3338BN Brushed Nickel 3/8" (10 mm)
(11 mm)
Minimum order: 1 each. All Glass Clamps can be combined for quantity pricing.
CRL 52 Degree Slant Open Center Clamp "B" CAT. NO. FINISH GLASS THICKNESS
1-7/8" RH4412BR Brass 1/2" (12 mm)
(47 mm) 1-7/8" Use Slant Open Center Clamps on top or RH4438BR Brass 3/8" (10 mm)
(47 mm) bottom midpoint of slanted glass. Reversible RH4412CH Chrome 1/2" (12 mm)
center clamps at 52 degree angle for use with RH4438CH Chrome 3/8" (10 mm)
3/8" or 1/2" (10 or 12 mm) thick glass. RH4412BN Brushed Nickel 1/2" (12 mm)
(11 mm)
Minimum order: 1 each. All Glass Clamps can be combined for quantity pricing.
CRL 128 Degree Slant Obtuse End Clamp "C" CAT. NO. FINISH GLASS THICKNESS
1-7/8" RH5512BR Brass 1/2" (12 mm)
(47 mm) Use Slant Obtuse End Clamps on bottom
RH5538BR Brass 3/8" (10 mm)
1-7/8" of glass at high end of slant, or top of glass RH5512CH Chrome 1/2" (12 mm)
(47 mm) at low end of slant. Clamps at 128 degree angle RH5538CH Chrome 3/8" (10 mm)
for use with 3/8" or 1/2" (10 or 12 mm) RH5512BN Brushed Nickel 1/2" (12 mm)
7/16" thick glass. RH5538BN Brushed Nickel 3/8" (10 mm)
(11 mm) Minimum order: 1 each. All Glass Clamps can be combined for quantity pricing.
CRL 90 Degree Straight End Clamp "D" CAT. NO. FINISH GLASS THICKNESS
1-7/8" RH2212BR Brass 1/2" (12 mm)
(47 mm) Use Straight End Clamps on top of glass RH2238BR Brass 3/8" (10 mm)
1-7/8" at end of level run, or bottom of glass at end RH2212CH Chrome 1/2" (12 mm)
(47 mm) of level run. Clamps are reversible with 90 degree RH2238CH Chrome 3/8" (10 mm)
corners for use with 3/8" or 1/2" (10 or 12 mm) RH2212BN Brushed Nickel 1/2" (12 mm)
3/8" thick glass. RH2238BN Brushed Nickel 3/8" (10 mm)
CRL 90 Degree Straight Open Center Clamp "E" CAT. NO. FINISH GLASS THICKNESS
1-7/8" RH1112BR Brass 1/2" (12 mm)
(47 mm) Use Straight Open Center Clamps on top or RH1138BR Brass 3/8" (10 mm)
1-7/8" bottom midpoint of glass on level run. Reversible RH1112CH Chrome 1/2" (12 mm)
(47 mm) open center clamps for use with 3/8" or 1/2" RH1138CH Chrome 3/8" (10 mm)
(10 or 12 mm) thick glass. RH1112BN Brushed Nickel 1/2" (12 mm)


When measuring an existing stairway for fabricated railings please keep in mind the importance of every measurement that is needed to
produce the required railing system. Measure every dimension that is indicated below to ensure your railing system is produced correctly.
Important: Depending on the complexity of
Style #1 your project, one or more of the following
may be required to accurately order: sketches
Measuring Short Run Stairways (4 or Fewer Treads) or drawings of your particular application
with dimensions; printed architectural
Dimensions Needed for Tread Mounted Post Rail System drawings or cad files; photos of the job site
conditions (digital images are preferable).
C Field Measure and Specify
Line Of Each Required Dimension
Finished Floor From the Key Below.
A=
Stair Angle B=
D C=
A
H
D=
E=
E F=
J
B G=
H=
F J=
REQUIRED TOOLS K
TAPE MEASURE K=
SQUARE
PLUMB LINE Stair Angle=
LASER LEVEL G
Line of
SKETCH PAD Finished Floor
ANGLE FINDER
Style #2
Measuring Long Run Stairways (5 or More Treads) Each Required Dimension
Dimensions Needed for Tread Mounted Post Rail System From the Key Below.
C A=
B=
Post C=
D
Post D=
Stair Angle
E=
F=
A
G=
E H=
K F
J=
B Post K=
Stair Angle=
H
K G
J Post
Line of
Riser 1 Finished Floor

A
C.R. Laurence Co.
P-Post Quote/Order
Request Form

Contact Fax #
Job Name Date
When you are ready to order, utilize this form to assist you IMPORTANT: Depending on the complexity of your project, one or more of
in covering the details required to complete a P-Post Railing the following may be required to accurately order: sketches or drawings of
System installation. Going through this exercise should prevent your particular application with dimensions; printed architectural drawings or
you from overlooking any details related to your installation. CAD files; photos of the job site conditions (digital images are preferable).
NOTE: Stairway applications will require additional layout drawing on page
R637 that needs to be filled out at time of order. A final sign off is required
prior to any custom fabrication.
RAILING HEIGHT POST STYLE GLASS ATTACHMENT FLOOR CONDITION

36" (914 mm) P1 Series Z- Series Clamps Flat
42" (1067 mm) P2 Series RB50 Fixed Attachment Fittings Sloped (Degrees)
Other (Specify)_________________ P4 Series RB50 Swivel Attachment Fittings
P6 Series Spider Fittings END CAPS
POST ATTACHMENT P7 Series Custom Welded Standoff Arms Applied Flat End Caps
Surface Mount (Top of Substrate) P8 Series Other (Specify)___________ Welded Flat End Caps
Core Mount Other (Specify)____________ None Welded Domed End Caps
Fascia Mount TOP RAIL SIZE RAILING INFILL
Other Specify
Other (Specify)_________________ 1-1/2" Schedule 40 1.9" O.D. 1/2" (12 mm) Glass FINISH
1-1/4" Schedule 40 1.66" O.D. 3/8" (10 mm) Glass
OPTIONAL HAND RAIL Other (Specify)____________ Brushed Stainless Steel
3/16" (4.8 mm) Dia. Cable
1-1/2" Diameter .050 Wall Thickness Polished Stainless Steel
SUBSTRATE Other (Specify)___________
1-1/2" Square .050 Wall Thickness Satin Brass
(Glass not supplied by CRL) Polished Brass
2" Diameter .050 Wall Thickness Wood
Concrete Powder Coated Aluminum
Other (Specify)_________________
Waterproof Custom Specify
None Required
Steel
Other (Specify)


1. Post Installation 2. Top Rail Installation
Install End and Corner Posts first to the substrate, and then Measure and install the top rail. Field fabrication may be required
continue with the intermediate posts. Be sure to measure and depending on job site conditions and top rail lengths. Attach the top
check the railing lengths and heights and ensure that the railing rail to the standoff saddle with Cat. No. PRS1032 10-32 x 5/8"
system is plumb and level. Stainless Steel Machine Screws. Drilling and tapping is required in
field. See page R807 for information on P-Post Top Rail Installation
Tool Kit.
3. Glass Fitting Installation 4. Glass Installation (Glass Panels Only)

After the railing system has been fully assembled and attached to After the railing system has been fully installed, measure to
the substrate, install the glass attachment fittings to the pre-drilled determine your glass panel sizes with hole locations if required.
and tapped holes on the posts. These glass attachment fittings When installing the glass infill panels remember to remove the
are used to hold the glass in place as an infill. glass fitting caps or back plate and align the glass panels to the
mounting hardware.

CRL SRS STANDOFF RAILING SYSTEM Contact CRL Tech Sales for complete planning
CRL Standoff Railing System

C.R. Laurence Company is now manufacturing Standoff Railing MANUFACTURED IN THE USA
BY C.R. LAURENCE
Systems. By specializing in the design and manufacturing of this
innovative system, we offer you the ability to create custom railings
the will address project-specific criteria. Product development is an
ongoing process at CRL. Rest assured that the products we offer
new
will represent the current evolution of the railing industry.
Design Options
• For Use With 1/2" or 3/4" (12 or 19 mm) Tempered Glass
• 316 Grade Stainless Steel
• Exterior and Interior Applications
• Two Architectural Finishes Available
• Powder Coated Finishes are Also Available
• Designed for Guard Rail, Stairway, Ramp Areas
• Meets or Exceeds A.D.A. Requirements
• Custom Engineering Also Available
• For a Full Line of Cap Rails, Hand Rails, and Hand Rail
Brackets, (See Pages R553-R583, R653-R675)
Installation Guidelines
Top Edge of Glass
Top of Guard Rail/Hand Rail
Recommended
Overall Hand Rail Bracket Overall
Glass Location
Height 6" Glass
(152.4 mm) 6" Height
(152.4 mm)
Guard Rail/
Hand Rail Guard Rail/
Height Hand Rail
Height
Line of Finished Floor
6" 24" (610 mm)

(152.4 mm) Max Spacing 4" (101.6 mm)
Recommended 4" (101.6 mm)
Minimum Spacing Minimum Vertical
60" (1524 mm) Max Recommended Spacing
Glass Panel Width
Typical Standoff Glass Rail Elevation Typical Section View
Accessories for Standoff Railing System

Top Rails Connector Sleeves Brackets Fasteners
See page R646 See page R646 See pages R669-R671 See page R818

CRL SRS STANDOFF RAILING SYSTEM For Pricing on CRL Products, Call Toll Free
CRL Standoff Railing System new MANUFACTURED IN THE USA

BY C.R. LAURENCE
CRL’s high quality commercial and residential Standoff Railing System is manufactured to meet or exceed applicable building code
requirements. This system can be designed to be mounted to almost any approved substrate. Utilizing our state-of-the-art manufacturing facility
we can produce almost any desired design to meet you project specifications. As illustrated below, this system is most commonly mounted to a
steel substrate. However, this system can also be engineered by CRL for other mounting surfaces, please contact CRL Technical Sales for
additional information.
Typical Mounting Options 1-3/4" x 2"

(44 x 51 mm)
Stainless Steel 1/2" or 3/4" (12 or 19 mm)
1-3/4" x 2" 1/2" or 3/4" (12 or 19 mm)
(44 x 51 mm) Thick Tempered Glass Thick Tempered Glass
Stainless Steel
3/8" Dia. Socket

Head Cap Screw 3/8"-16
Steel Support By Others Threaded Rod
8"
(203 mm)
Varies
4" 3/8" Thick Steel
(101.6 mm)
8" x 4" x 3/8"
(203 x 102 x 9.5 mm) Steel Support By Others
Thick Stainless Steel Plate
3/8" 3/8"
(9.5 mm) (9.5 mm)
1-3/4"
(44 mm) 1-3/4"
3/8" (44 mm)
(9.5 mm)
CAT. NO. RS0B20 CAT. NO. RS0B2134
(See page R642) (See page R642)

CRL SRS STANDOFF RAILING SYSTEM Contact CRL Tech Sales for complete planning
CRL Glass Rail new

Standoff Fittings
• Complete With Mounting Plate
• For Use With 1/2" and 3/4" (12 and 19 mm)
Tempered Glass Applications
• Brushed or Polished 316 Grade
Stainless Finishes Available MANUFACTURED IN THE USA
BY C.R. LAURENCE
• Designed for Wood or Steel

Mounting Attachment
Our new Glass Rail Standoff Fittings can be used 1-3/4" x 2" (44 x 51 mm) 1/2" or 3/4"
Stainless Steel (12 or 19 mm) 4"
two ways to mount glass up to 3/4" (19 mm) thick.
Thick Clear (102 mm) Drilled for
The Drill-Through Method will allow flush mounting Tempered Glass 3/8" (9.5 mm)
of the glass to the surface of the substrate. The Support Bolts
(by Others)
steel back plate can also be fastened directly to
steel supports, raising the glass off of the surface. 2"
(51 mm)
This versatile Standoff Fitting features 2" (51 mm)
diameter caps on threaded bolts to secure the glass.
8" 4"
The 2" (51 mm) diameter Standoffs are fastened to
(203 mm) (101.6 mm)
a 3/8" (9.5 mm) thick, 316 grade stainless steel plate
that is pre-drilled for mounting. Two popular 8"
8" x 4" x 3/8" (203 mm)
stainless finishes are available from stock. (203 x 102 x 9.5 mm)
For additional information, contact CRL Technical Thick Stainless 3/8"
Steel Plate (9.5 mm)
Sales at (800) 421-6144 in the U.S., (877) 421-6144
from Canada, or (323) 588-1281 International. Ask 2"
for Ext. 7700. You can also e-mail us through our 3/8" 1-3/4" (51 mm)
web site at crlaurence.com. From the home page (9.5 mm) (44 mm)
click on Contact Us, and then click on Steel Application
Technical Sales. SPECIFICATIONS:
For Use With 1/2" or 3/4" (12 or 19 mm) Tempered Glass
CAT. NO. FINISH (Do not use with raw or annealed glass)
Brushed Stainless Glass Fabrication:
RS0B20BS Spanner Wrench Two 3/4" (19 mm) Diameter Holes Per Fitting
RS0B20PS Polished Stainless
CAT. NO. SSW12 Spacing:
Minimum order: 1 each. Finishes can be combined for quantity pricing.
Maximum spacing between Fittings is 24" (609 mm) center-to-center.
CRL Glass Rail Standoff Base and Cap new

1-3/4" 3/8"
• Compact Design With Base, 3/8" (44.4 mm) (9.5 mm)
(9.5 mm)
Cap, and Mounting Stud MANUFACTURED IN THE USA
BY C.R. LAURENCE
• For Use With 1/2" and 3/4" (12 and Standoff
19 mm) Tempered Glass Applications 2" (50.8 mm)

• Brushed or Polished 316 Grade 2" (50.8 mm)
Stainless Finishes Available Long 3/8"-16
Mounting Stud
For Use With
1/2" or 3/4" Glass Neoprene
• Designed for Steel, Aluminum, (Included) (12 or 19 mm) Black Gasket
and Concrete Substrates SPECIFICATIONS:
For Use With 1/2" or 3/4" (12 or 19 mm)
These heavy-duty Standoffs work with hand or Tempered Glass (Do not use with raw or
guard railings. The standoff fitting is 2" (51 mm) annealed glass)
diameter and 1-3/4" (44.5 mm) long, comes with Glass Fabrication:
a 3/8"-16 x 2" Allen Stud for mounting, along with One 3/4" (19 mm) Diameter Hole Per Fitting
necessary rubber washers and grommet. Use Spacing: CAT. NO. FINISH
Maximum horizontal spacing between fittings
Spanner Wrench Cat. No. SSW12 to tighten the on hand or guard rail applications is 24" RS0B2134BS Brushed Stainless
cap (see above). Fabricated with #316 grade (609 mm) center-to-center and minimum RS0B2134PS Polished Stainless
stainless steel in brushed or polished finishes. height is 4" (101.6 mm) center-to-center. Minimum order: 1 each. Finishes can be combined for quantity pricing.

CRL STANDOFF AND GLASS CONNECTION SYSTEMS For Pricing on CRL Products, Call Toll Free
Standoff and Glass Connection Systems
Slot Mount Standoffs
• CRL's Family of Standoff Products Can Be

Used Independently or Together to Create
Unique Designs
C.R. Laurence has more than Standoffs. We offer a
complete family of Standoff related products. From our
standard line of Round and Square Standoffs, to Custom
Standoffs, Cap Assemblies, Edge Grips, Slot Mount
Standoffs, Accent Rings, Swivel Fittings, Framepegs, and Square Standoff Bases
Mounting Hardware, CRL has everything you will need
to create innovative designs in architecture, store fixtures,
signage, and furniture. Most are available in Chrome,
Brass, Brushed Stainless, Satin Chrome, and Gun Metal
finishes. CRL's Standoff and Glass Connection System
Round Standoff Bases provides architects and designers unlimited resources for
retail store, commercial or restaurant applications.
See our expanded

selection of Standoffs Framepegs
and related hardware,
along with color
photos of finished
Standoff projects,
in our new CRL63
Architectural
Hardware Catalog.
You can view it online
at crlaurence.com.
Edge Grips
Standard
Cap Assemblies
Accent Rings Low Profile Cap

Assemblies
Swivel Fittings
For full details, contact CRL Technical Sales, or visit our web site at crlaurence.com

CRL WRS POST RAILING SYSTEMS Contact CRL Tech Sales for complete planning
(WRS) Welded Railing System at Stair Location (WRS) Welded Railing System at Ramp Location
(WRS) Welded Railing System at Ramp Location

CRL WRS POST RAILING SYSTEM For Pricing on CRL Products, Call Toll Free
CRL "Welded" Post Railing System

for Use With Glass Infill Panels
• Available in 1-1/2" (38.1 mm) Schedule
40 Pipe, 1.90" (48.3 mm) Outside Diameter
• Available in Polished or Brushed Stainless Steel,
Polished Brass, Mill or Powder Coated Aluminum
• Glass is Secured With Our Z-Series Glass
Clamps, Custom Standoffs or Spider Fittings
• Custom Fabricated to Your Specifications
BY C.R. LAURENCE
CRL WRS Post Railing Systems for use with glass infill panels are custom fabricated to the customer's specifications. They are available
in 1-1/2" (38.1 mm) Schedule 40 Pipe. Other diameters are available on special order. Polished stainless steel or brushed stainless steel
finishes are available from stock, as well as polished brass, mill and powder coated aluminum. Other finishes are available on special
order. All WRS Post Rails are supplied with Internal Splice Connectors and accessories required for completing the system.
FABRICATED 1.9" O.D. POST RAIL SYSTEM (1-1/2" SCHEDULE 40) FOR 3/8" OR 1/2" (10 OR 12 MM) GLASS INFILLS
PR1540BS Fabricated 1.9" O.D. Post Rail System 1-1/2" Sch. 40 for Glass Brushed Stainless Steel
PR1540PS Fabricated 1.9" O.D. Post Rail System 1-1/2" Sch. 40 for Glass Polished Stainless Steel
PR1540M Fabricated 1.9" O.D. Post Rail System 1-1/2" Sch. 40 for Glass Aluminum Powder Coat
Drawings (with dimensions are required) for quotes and order request.
Welded Construction Integrated Hand Railing and Brackets

CRL WRS Post Railings are CRL Hand Railings can be
constructed using welded intersections combined with Post Railings using
and Internal Splice Connectors to Standard Post Mount Brackets found
produce a custom job site fabricated on pages R670 to R671, or with
look, but with the convenience of being custom designed brackets to meet
a modular system. any design need.
Various Mounting Options A Variety of Glass Securing Options

CRL WRS Post Railings can be
fabricated with a Welded Floor Flange
for surface mounting to various
substrates and angles. An optional
cover is available to provide a more
finished look.
CRL Z-Series Glass Clamps are CRL's line of Spider Fittings

When a more sleek design is used as the standard means of is especially designed for use
required, CRL WRS Post Railings can securing glass infill panels, and are on Post Railings. See pages
be fabricated for embed mount into the stocked in a variety of finishes and R622 to R629 for details.
concrete substrate. A minimum 8" sizes. See pages R631 to R636.
(203 mm) embedment depth is required.
Always consult local code requirements.
CRL can design custom Fascia

Mount Brackets to meet your design
needs. As with all custom
applications, proper engineering is CRL Double Arm Glass CRL offers infinite design options
required to ensure code compliance Fittings are designed for straight with the use of Standoffs in your
and safety. or segmented applications. See Post Railing projects. Consult CRL
page R620 for details. Technical Sales for information on
Custom Standoff needs.

CRL WRS POST RAILING SYSTEM Contact CRL Tech Sales for complete planning
CRL 1-1/2" Schedule 40 Pipe Rail Tubing new

• Designed for Guard Rail, Hand Rail,
Stairway and Handicap Ramp Areas .145" (3.8 mm)
Wall Thickness
• 1.9" (48.3 mm) Outside Diameter
1.9"
• Available in Polished or Brushed Stainless (48.3 mm)
Steel, Mill, or Powder Coated Aluminum
• Available in Stock Lengths and Custom
Fabricated to Your Specifications
1-1/2" (38.1 MM) SCHEDULE 40 PIPE RAIL TUBING CRL's 1-1/2" Schedule 40 Pipe Rail Tubing is
CAT. NO. FINISH WALL THICKNESS LENGTH USE SLEEVE NO. designed for guard rail, hand rail, stairway, and handicap
PR15BS10 Brushed Stainless .145" (3.8 mm) 120" (3.05 m) PR19CSS ramp areas. Formed using precision tooling to maintain
PR15BS20 Brushed Stainless .145" (3.8 mm) 240" (6.10 m) PR19CSS uniform diameters and allowing for smooth hairline
PR15PS10 Polished Stainless .145" (3.8 mm) 120" (3.05 m) PR19CSS transitions at splice and end cap locations. Use of our
PR15PS20 Polished Stainless .145" (3.8 mm) 240" (6.10 m) PR19CSS Cat. No. 32629 Metal Contact Cement (see page R667)
HR19M Mill Finish Aluminum .145" (3.8 mm) 240" (6.10 m) GR19CSM is required to achieve a secure and permanent bond
Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing. Must ship via common carrier. at all connections.
CRL 1-1/4" Schedule 40 Pipe Rail Tubing new

• Designed for Guard Rail, Hand Rail, Stairway
and Handicap Ramp Areas .140" (3.6 mm)
Wall Thickness
• 1.66" (42.2 mm) Outside Diameter
1.66"
• Available in Polished or Brushed Stainless Steel (42.2 mm)
• Available in Stock Lengths and Custom

Fabricated to Your Specifications
1-1/4" (31.8 MM) SCHEDULE 40 PIPE RAIL TUBING
CRL's 1-1/4" Schedule 40 Pipe Rail Tubing is designed
CAT. NO. FINISH WALL THICKNESS LENGTH USE SLEEVE NO. for guard rail, hand rail, stairway, and handicap ramp
PR12BS10 Brushed Stainless .140" (3.6 mm) 120" (3.05 m) PR16CSS areas. Formed using precision tooling to maintain uniform
PR12BS20 Brushed Stainless .140" (3.6 mm) 240" (6.10 m) PR16CSS diameters and allowing for smooth hairline transitions at
PR12PS10 Polished Stainless .140" (3.6 mm) 120" (3.05 m) PR16CSS splice and ends cap locations. Use of our Cat. No. 32629
PR12PS20 Polished Stainless .140" (3.6 mm) 240" (6.10 m) PR16CSS
Metal Contact Cement (see page R667) is required to
Minimum order: 1 each. All sizes and finishes can be combined for quantity pricing. Must ship via common carrier.
achieve a secure and permanent bond at all connections.
CRL Pipe Rail Splice Connectors

• Provides Proper Alignment
Between Railing Splices new
• Shaped to Fit, and Ready to Install
in Pipe Railings (See Above) 5" 5"
(127 mm) (127 mm)
CRL Pipe Rail Splice Connectors are used to
connect and provide proper alignment between railing PR19CSS PR16CSS
splice locations. Use of our Cat. No. 32629 Metal Stainless Steel Stainless Steel
Contact Cement (see page R667) is required to achieve
a secure and permanent bond at all connections.
Important Installation Note: Always Use Connector Sleeves Made of
the Same Metal as the Cap Rail, Cap Rail Corner, or Hand Rail Metal
CAT. NO. MATERIAL FOR USE WITH

5"
PR19CSS Stainless Steel 1-1/2" Sch. 40 1.9" (48.3 mm) Tubing (127 mm)
PR16CSS Stainless Steel 1-1/4" Sch. 40 1.66" (42.2 mm) Tubing
GR19CSM Mill Aluminum 1-1/2" Sch. 40 1.9" (48.3 mm) Tubing GR19CSM
Minimum order: 1 each. All Splice Connectors can be combined for quantity pricing. Aluminum

CRL End Caps for Schedule 40 Pipe Railings

new
• Two Finishes Plus Mill Aluminum
• Custom End Caps are Also Available
CRL End Caps easily slip into our Schedule
40 Pipe Rails for a finished look. Use of our Cat.
No. 32629 Metal Contact Cement (see pg R667) is
required to achieve a secure and permanent bond GR19ECM
at all connections. PR15EC 1-1/2" Aluminum PR12EC
1-1/2" Stainless 1-1/4" Stainless
FOR 1-1/2" (38.1 MM) SCHEDULE 40 PIPE RAIL
FOR 1-1/4" (31.8 MM) SCHEDULE 40 PIPE RAIL
PR15ECBS Brushed Stainless PR15BS CAT. NO. FINISH FITS CAP RAIL NO.
PR15ECPS Polished Stainless PR15PS PR12ECBS Brushed Stainless PR12BS
GR19ECM Mill Finish Aluminum HR19M PR12ECPS Polished Stainless PR12PS
CRL Base Flanges for Schedule

40 Pipe Railings new
• Designed to be Welded to the Post Base
Concrete/Steel Mount Wood Mount
• Two Finishes, Plus Mill Aluminum 9/16"
9/16" (14.3 mm)
• Flanges for 1.9" O.D. Tube and 1.66" O.D. Tube (14.3 mm) Diameter
Diameter Mounting
• Designed for 3/8" Anchor Bolts Mounting Holes
Holes 1-1/4"
(31.8 mm)
CRL Base Flanges can be used on guard rail, hand rail stairway,
and handicap ramp areas. Available for concrete, steel, and wood
substrates and designed for 3/8" anchor bolts these base flanges
need to be welded to the post base during fabrication. Cover plates 3-1/2" 3"
are sold separately. (see below). (88.9 mm) (76.2 mm)
4-3/4" 4-3/4"
(120.7 mm) (120.7 mm)
BASE FLANGES FOR 1-1/2" (38.1 MM) AND 1-1/4" (31.8 MM) SCHEDULE 40 PIPE RAIL
CAT. NO. DESCRIPTION MOUNTING STYLE MATERIAL
PR15FCS Base Flange For 1-1/2" (38.1 mm) Sch. 40 Pipe Rail Concrete/Steel Mount Mill Finish Stainless Steel
PR15FWS Base Flange For 1-1/2" (38.1 mm) Sch. 40 Pipe Rail Wood Mount Mill Finish Stainless Steel
PR12FCS Base Flange For 1-1/4" (31.8 mm) Sch. 40 Pipe Rail Concrete/Steel Mount Mill Finish Stainless Steel
PR12FWS Base Flange For 1-1/4" (31.8 mm) Sch. 40 Pipe Rail Wood Mount Mill Finish Stainless Steel
PR19FCM Base Flange For 1-1/2" (38.1 mm) Sch. 40 Pipe Rail Concrete/Steel Mount Mill Finish Aluminum
PR19FWM Base Flange For 1-1/2" (38.1 mm) Sch. 40 Pipe Rail Wood Mount Mill Finish Aluminum
CRL Base Flange Covers new

1-3/16"
• For Use on Surface, Stair, Ramp or Core Mount Applications (30.2 mm)
• Snap on Covers
CRL Covers are design to snap over the base flange and cover the base plate and
anchor bolts to dress up the installation.
4-7/8"
COVER PLATES FOR 1-1/2" (38.1 MM) AND 1-1/4" (31.8 MM) SCHEDULE 40 PIPE RAIL (123.8 mm)
CR15SPCBS Base Cover For 1-1/2" (38.1 mm) Sch. 40 Pipe Rail Brushed Stainless
CR15SPCPS Base Cover For 1-1/2" (38.1 mm) Sch. 40 Pipe Rail Polished Stainless
CR12SPCBS Base Cover For 1-1/4" (31.8 mm) Sch. 40 Pipe Rail Brushed Stainless
CR12SPCPS Base Cover For 1-1/4" (31.8 mm) Sch. 40 Pipe Rail Polished Stainless

CRL "Welded" Post Railing

System With Cable Infill MANUFACTURED IN THE USA
BY C.R. LAURENCE
• Available in 1-1/2" (38.1 mm) Schedule

40 Pipe, 1.90" (48.3 mm) Outside Diameter
• Polished or Brushed Stainless Steel, and
Mill or Powder Coated Aluminum Finishes
• Uses 3/16" (4.8 mm) Diameter 1 x 19 Type
316 Stainless Steel Uncoated Cable
CRL WRS Post Railing Systems for Cable are custom fabricated to the customer's specifications. They are available in 1-1/2" (38.1 mm)
Schedule 40 Pipe. Other diameters are available on special order. Polished stainless steel or brushed stainless steel finishes are available
from stock, as well as mill or powder coated aluminum. Other finishes are available on special order. All WRS Post Rails are supplied with
Internal Splice Connectors, Cable, and all accessories required for completing the system.
FABRICATED 1.9" O.D. POST RAIL SYSTEM (1-1/2" SCHEDULE 40) WITH 3/16" DIAMETER STAINLESS STEEL CABLE INFILLS
PRC1540BS Fabricated 1.9" O.D. Post Rail System 1-1/2" Sch. 40 with Cable Brushed Stainless Steel
PRC1540PS Fabricated 1.9" O.D. Post Rail System 1-1/2" Sch. 40 with Cable Polished Stainless Steel
PRC1540M Fabricated 1.9" O.D. Post Rail System 1-1/2" Sch. 40 with Cable Aluminum Powder Coat
Drawings (with dimensions are required) for quotes and order request.
CRL 3/16" Stainless Steel Cable 3/16"

(4.8 mm)
• 3/16" (4.8 mm) Diameter 1 x 19 Diameter
Type 316 Stainless Steel Cable

• Uncoated and Low Maintenance
Stainless Steel Cable is 19
CRL 3/16" (4.8 mm) Stainless Steel Cable separate wires twisted into a
single strand. See page R822
is made to hold static loads without stretching, for Cable Installation Tools.
and is relatively stiff. Recommended spacing
between cables is 3" (76.2 mm) center-to- 3/16" (4.8 MM) STAINLESS STEEL CABLE
center. Order Cable in rolls, pre-cut kits with CAT. NO. ROLL LENGTH
hardware, or we can custom cut it to your CBL316 250' (76.2 m)
required length (see below). Minimum order: 1 roll.
CRL 3/16" Pre-Cut Stainless Steel Cable Kits Swaging Stud

Push Lock
• Available in Four Pre-Cut Sizes Factory Installed
• Factory Installed Swaging Stud

CRL Pre-Cut Stainless Steel Cable Kits are offered in four standard lengths
to make the install go easy. Included with each kit; one pre-cut 3/16" (4.8 mm) Tension Cable
diameter 1 x 19 Type 316 Stainless Steel Cable, one Cat. No. SWGST2 Swaging Receiver
Stud factory installed on Cable, one Cat. No. TENRR2 Tensioning Receiver, and
one Cat. No. PL6SS Push Lock. Recommended maximum spacing between cables
is 3" (76.2 mm) center-to-center. The 1 x 19 construction Cable is engineered to
hold static loads without stretching, and is relatively stiff. The maximum cable run
is 50' (15.2 m) and post spacing is not to exceed 42" (1.06 m) on center.
3/16" (4.8 MM) STAINLESS STEEL CABLE KITS
PL6SS Push Lock CAT. NO. LENGTH
TENRR2 Post 3/16" Dia. Cable for 3/16" Dia. Cable
Receiver CBL3168K 8' (2.4 m)
Post CBL31618K 18' (5.5 m)
CBL31636K 36' (10.9 m)
CBL31651K 51' (15.5 m)
CBL316KC *Custom Length
Minimum order: 1 each. *Must specify custom length at time of order.

CRL Tensioning Receiver 2-3/8"

Post
(60.3 mm) 7/16"

• For Use With 3/16" (4.8 mm) (11.1 mm)
Diameter 1 x 19 Type Cable Receiver
Swaged
The CRL Tensioning Receiver is a Threaded
tensioning device hidden inside the end Stud
9/16"
posts, with only the head of the Receiver (14.3 mm)
exposed on the outside of the post. It
The Receiver can be used in a
allows the Cable to be adjusted between horizontal position on stair end posts
Post
spans. The inside is female-threaded to Swaged that have a pitch up to 35 degrees. This
accept the male-threaded Cat. No. Receiver Washer Threaded eliminates the need to bore hardware
Stud holes at an angle on stair runs.
SWGST2 Swaging Stud that is attached to
the Cable. Requires 3/16" hex wrench to Allen Head
CAT. NO. FITS CABLE DIAMETER
fasten. 7/16" (11 mm) diameter clear hole Stainless TENRR2 3/16" (4.8 mm)
Counterbored
is required when drilling post for fitting. Hole on Post Only Steel Cable
CRL Swaging Stud Fitting

• For Use With 3/16" (4.8 mm)
Diameter 1 x 19 Type Cable
Swaged on the end of the Stainless Steel Cable,
this part is used with the Cat. No. TENRR2 1-1/8"
Tensioning Receiver. When installed, it is completely (28.6 mm)
hidden inside the Fitting so you will never see any Threads into Cat. No. TENRR2
unattractive swaging marks. The threaded surface is Tensioning Receiver
coated with a baked-on, molybdenum-based dry film
lubricant to prevent the threads from galling when
tensioned and in extreme environments. Only for SWGST2 3/16" (4.8 mm)
use with 3/16" (4.8 mm) Cable.
CRL Push Lock Fitting

1-9/16"
(39.7 mm) 7/16"
(11.1 mm) new
The CRL Push Lock Fittings are designed to be used 17/32"
on 3/16" (4.8 mm) Cable. They rest in a hole in the end (13.5 mm)
post. When used with an end post 1-1/2" (38.1 mm) or
more in thickness, the Push Lock Fitting with a rounded
head is hidden inside the end post, with only the head
exposed on the outside of the post. A plastic washer is
included and acts as a scratch resistant barrier PL6SS 3/16" (4.8 mm)
between the Push Lock Fitting and a metal post.
13/16"
CRL Ferrule Fitting (20.6 mm)
7/16"
• For Use on the Fixed, Non-Tensioning (11.1 mm)
End of Our 3/16" (4.8 mm) 1 x 19 Type 9/16"
316 Stainless Steel Construction Cable (14.3 mm)
• Mounts to Aluminum, Wood or

Stainless Steel Posts Post Swaged
When installed, the Ferrule Fitting is hidden inside Stainless Radius
the end post, with only the head exposed on the outside Steel Cable Ferrule
of the post. After it's installed, It looks the same as the
Tensioning Receiver. Only for use with 3/16" (4.8 mm)
diameter Cable. 7/16" (11 mm) diameter clear hole is CAT. NO. FITS CABLE DIAMETER
required where fitting is located in post. This Fitting must Washer FXFRL2 3/16" (4.8 mm)
be installed using a Swagger Tool (see page R822). Minimum order: 1 each.

A
C.R. Laurence Co.
WRS Quote/Order
Request Form

Contact Fax #
Job Name Date
in covering the details required to complete a Welded Railing the following may be required to accurately order: sketches or drawings of
NOTE: Stairway applications will require additional layout drawing on page
R637 that needs to be filled out at time of order. A final sign off is required
prior to any custom fabrication.
RAILING HEIGHT POST SIZE RAILING INFILL END CAPS

36" (914 mm) 1-1/2" Schedule 40 1.9" O.D. 1/2" (12 mm) Glass Applied Flat End Caps
42" (1067 mm) Other (Specify) __________ 3/8" (10 mm) Glass Welded Flat End Caps
Other (Specify) 3/16" (4.8 mm) Dia. Cable Welded Domed End Caps
Other (Specify) Other Specify
POST ATTACHMENT SUBSTRATE (Glass not supplied by CRL)
Surface Mount (Top of Substrate) Wood
Core Mount Concrete FLOOR CONDITION FINISH
Fascia Mount Waterproof
Steel Flat Brushed Stainless Steel
Other
Other (Specify) Sloped (Degrees) _______ Polished Stainless Steel
OPTIONAL HAND RAIL Satin Brass
Polished Brass
1-1/2" Diameter .050 Wall Thickness GLASS ATTACHMENT Powder Coated Aluminum
2" Diameter .050 Wall Thickness Z- Series Clamps Custom Specify
Other (Specify) RB50 Fixed Attachment Fittings
None Required RB50 Swivel Attachment Fittings
Spider Fittings TOP RAIL CONNECTION
TOP RAIL SIZE Custom Welded Standoff Arms Standard Cope (Welded Post to Top Rail)
1-1/2" Schedule 40 1.9" O.D. Other Standoff Saddle (Mechanically Attached Post to Top Rail)
1-1/4" Schedule 40 1.66" O.D. None
Other (Specify)


1. Railing Installation 2. Splice Sleeve Installation
Assemble and layout the pre-fabricated railing sections Install internal splices at all railing joints with structural silicone
per the approved layout/shop drawings. Measure and (see page R536) or metal contact cement (see page R667) during
check lengths and heights. When anchoring the railing the railing assembly.
sections to the substrate be sure to use the correct
mounting hardware. Ensure that the railing system
is plumb level.
3. Glass Fitting Installation 4. Glass Installation

After the railing system has been fully assembled and attached (Glass Panels Only)
to the substrate, install the glass attachment fittings to the pre-
After the railing system has been fully installed, measure to
drilled and tapped holes on the posts. These glass attachment
determine your glass panel sizes with hole locations if required.
fittings are used to hold the glass in place as an infill.
When installing the glass infill panels remember to remove the
glass fitting caps or back plate and align the glass panels to the
mounting hardware.

CRL HRS HAND RAILING SYSTEM Contact CRL Tech Sales for complete planning
CRL HRS Hand Rail

Tubing and Components
• Designed for Commercial and
Residential Applications
• Utilizes 1-1/2" (38.1 mm) and 2" (50.8 mm)
Tubing as Well as 1-1/2" (38.1 mm) Schedule
40 Aluminum Pipe [1.9" (48.3 mm) Outside
Diameter]
• Can Be Designed to Meet the Strictest of
Building Codes and are A.D.A. Compliant
• Complete Selection of Flush and Ball
Type Fittings
• Easy to Install and Attractively Priced
• Select From a Variety of Architectural
Finishes
CRL has developed a line of Hand Rail Tubing and Components

to complete our HRS Hand Railing System. Our collection of
Corners, Tees, Elbows, Crosses, Flanges, and Brackets will fill the
need of most projects. We will also custom fabricate to fit your
unique job conditions. CRL Hand Rail Tubing is precision made
stainless steel or brass with .050" (1.27 mm) wall thickness.
Our aluminum tubing has a hefty .145" (3.68 mm) wall for added
strength. For complete information on HRS Hand Rails, see the
following pages.
CRL Custom Fabrication and Finishing

• Cutting, Mitering, Drilling, Bending, Welding, CRL offers many finish options, including anodizing, painting, and
powder coating. We operate our own polishing department that can
Finishing, and Other Services to Create provide straight and spiral sanding, as well as mechanical sanding
Just the Right Product for the Job and polishing.
For additional information, contact CRL Technical Sales at (800)
CRL offers state-of-the-art custom fabrication that can handle 421-6144 in U.S., (877) 421-6144 from Canada, or (323) 588-1281
the most complex projects you may encounter. By offering cutting, International, and ask for Ext. 7730. You can also e-mail us through
mitering, drilling, bending, welding, finishing, and other services, our web site at crlaurence.com. From the home page click on
CRL can save the installer time and labor. Contact Us, and then click on Technical Sales.

CRL HRS HAND RAILING SYSTEM For Pricing on CRL Products, Call Toll Free
CRL Hand Railing Tubing

• Five Architectural Finishes Plus Mill Aluminum
• Requires End Caps or Connector Sleeves
(Not Included)
All CRL Hand Railing Tubing is formed using precision
tooling to maintain uniform diameters, allowing for smooth
hairline transitions at splices and end caps. Use of our
Cat. No. 32629 Metal Contact Cement (see page R667) is
required to achieve a secure and permanent bond at all
connections. Standard stainless alloy is 304. Stainless
alloy 316 is available on special order. Standard brass alloy
is 260. Standard aluminum alloy is 6063-T6. Contact CRL
Technical Sales for more information or a quote.
NOTE: Tubing is not designed for guard rail posts or top rails.
Brushed Stainless Polished Stainless Polished Brass
Dark Bronze Anodized Satin Anodized Mill Aluminum
We Have a Complete Line of Hand Railing Accessories

1-1/2" (38.1 MM) DIAMETER HAND RAIL TUBING
CAT. NO. FINISH WALL THICKNESS LENGTH USE SLEEVE NO.
HR15BS Brushed Stainless .050" (1.27 mm) 236" (6.0 m) GR15CSS
HR15PS Polished Stainless .050" (1.27 mm) 236" (6.0 m) GR15CSS
HR15PB Polished Brass .050" (1.27 mm) 216" (5.49 m) GR15CSB
Minimum order: 1 each. All Hand Rail Tubing can be combined for quantity pricing. Must ship common carrier.
1.9" (48.3 MM) DIAMETER HAND RAIL TUBING

HR19M Mill Aluminum .145" (3.68 mm) 240" (6.09 m) GR19CSM
HR19SA Satin Anodized .145" (3.68 mm) 240" (6.09 m) GR19CSM
HR19DU Dark Bronze Anodized .145" (3.68 mm) 240" (6.09 m) GR19CSM
NOTE: Railing Accessories shown on the following pages are not available for 1.9" (48.3 mm) Tubing.
2" (50.8 MM) DIAMETER HAND RAIL TUBING

HR20BS Brushed Stainless .050" (1.27 mm) 236" (6.0 m) GR20CSS
HR20PS Polished Stainless .050" (1.27 mm) 236" (6.0 m) GR20CSS
HR20PB Polished Brass .050" (1.27 mm) 216" (5.49 m) GR20CSB

CRL Hand Railing Connector Sleeves

• Provide Proper Alignment Between Railing Splices
• Formed, Shaped to Fit, and Ready to Install
CRL Connector Sleeves are used to connect and provide proper
alignment between Hand Railing splices. The 5" (127 mm) long
Connector Sleeves must be compressed to fit inside the Hand Railing.
Use of our Cat. No. 32629 Metal Contact Cement (see page R667) is
required to achieve a secure and permanent bond at all connections.
Important Installation Note: Always Use Connector Sleeves Made of the

Same Metal as the Cap Rail, Cap Rail Corner, or Hand Rail Metal
CONNECTOR SLEEVES FOR 1-1/2" (38.1 MM) TUBING

CAT. NO. MATERIAL USE WITH
GR15CSS Stainless Steel HR15BS/HR15PS 1-1/2" (38.1 mm) Stainless Steel Hand Railing Tubing
GR15CSB Brass HR15PB 1-1/2" (38.1 mm) Brass Hand Railing Tubing
Minimum order: 1 each. All Connector Sleeves can be combined for quantity pricing.
CONNECTOR SLEEVE FOR 1.9" (48.3 MM) TUBING

GR19CSM Mill Aluminum HR19M/HR19SA/HR19DU 1.9" (48.3 mm) Aluminum Hand Railing Tubing
CONNECTOR SLEEVES FOR 2" (50.8 MM) TUBING

GR20CSS Stainless Steel HR20BS/HR20PS 2" (50.8 mm) Stainless Steel Hand Railing Tubing
GR20CSB Brass HR20PB 2" (50.8 mm) Brass Hand Railing Tubing
CRL Flat End Caps H
• Five Architectural Finishes

Plus Mill Aluminum
CRL Flat End Caps are ready to install, and easily
slip into our Hand Railing Tubing. Use of our Cat. No.
32629 Metal Contact Cement (see page R667) is
required to achieve a secure and permanent bond.
Finishes are stocked to match Hand Railing Tubing
in all three diameters.
FLAT END CAPS FOR 1-1/2" (38.1 MM) TUBING

CAT. NO. FINISH "H" HEIGHT
HR15FBS Brushed Stainless 5/32" (4 mm)
HR15FPS Polished Stainless 5/32" (4 mm)
HR15FPB Polished Brass 5/32" (4 mm)
Minimum order: 1 each. All Railing End Caps can be combined for quantity pricing.
FLAT END CAPS FOR 1.9" (48.3 MM) TUBING

GR19ECM Mill Aluminum 1/8" (3.2 mm)
GR19ECSA Satin Anodized 1/8" (3.2 mm)
GR19ECDU Dark Bronze Anodized 1/8" (3.2 mm)
FLAT END CAPS FOR 2" (50.8 MM) TUBING

HR20FBS Brushed Stainless 1/8" (3.2 mm)
HR20FPS Polished Stainless 1/8" (3.2 mm)
HR20FPB Polished Brass 1/8" (3.2 mm)

CRL Dome End Caps

• Three Architectural Finishes
NOTE: Use Cat. No. 32629 Metal

H Contact Cement for a secure and
permanent bond (see page R667)
DOME END CAPS FOR 1-1/2" (38.1 MM) TUBING DOME END CAPS FOR 2" (50.8 MM) TUBING
CAT. NO. FINISH "H" HEIGHT CAT. NO. FINISH "H" HEIGHT
HR15DBS Brushed Stainless 3/4" (19 mm) HR20DBS Brushed Stainless 1" (25 mm)
HR15DPS Polished Stainless 3/4" (19 mm) HR20DPS Polished Stainless 1" (25 mm)
HR15DPB Polished Brass 3/4" (19 mm) HR20DPB Polished Brass 1" (25 mm)
Minimum order: 1 each. All Railing End Caps can be combined for quantity pricing. Minimum order: 1 each. All Railing End Caps can be combined for quantity pricing.
CRL 90 Degree Flush Angle Ends

• Ready to Install W

Contact Cement for a secure and
90 DEGREE FLUSH ANGLE ENDS FOR 1-1/2" (38.1 MM) TUBING 90 DEGREE FLUSH ANGLE ENDS FOR 2" (50.8 MM) TUBING
CAT. NO. FINISH "L" LENGTH "W" WIDTH CAT. NO. FINISH "L" LENGTH "W" WIDTH
HR15RBS Brushed Stainless 2-3/4" (70 mm) 2-3/4" (70 mm) HR20RBS Brushed Stainless 3-5/32" (80 mm) 3-11/32" (85 mm)
HR15RPS Polished Stainless 2-3/4" (70 mm) 2-3/4" (70 mm) HR20RPS Polished Stainless 3-5/32" (80 mm) 3-11/32" (85 mm)
HR15RPB Polished Brass 2-3/4" (70 mm) 2-3/4" (70 mm) HR20RPB Polished Brass 3-5/32" (80 mm) 3-11/32" (85 mm)
CRL Sharp Radius 90 Degree Corners

• Ready to Install L

SHARP RADIUS 90 DEGREE CORNERS FOR 1-1/2" (38.1 MM) TUBING SHARP RADIUS 90 DEGREE CORNERS FOR 2" (50.8 MM) TUBING
HR15HBS Brushed Stainless 2" (50 mm) 2" (50 mm) HR20HBS Brushed Stainless 2-3/8" (60 mm) 2-3/8" (60 mm)
HR15HPS Polished Stainless 2" (50 mm) 2" (50 mm) HR20HPS Polished Stainless 2-3/8" (60 mm) 2-3/8" (60 mm)
HR15HPB Polished Brass 2" (50 mm) 2" (50 mm) HR20HPB Polished Brass 2-3/8" (60 mm) 2-3/8" (60 mm)
Minimum order: 1 each. All Hand Rail Fittings can be combined for quantity pricing. Minimum order: 1 each. All Hand Rail Fittings can be combined for quantity pricing.

CRL 135 Degree Side Outlet Elbows

CL
135
CL Degrees
135 DEGREE SIDE OUTLET ELBOWS FOR 1-1/2" (38.1 MM) TUBING 135 DEGREE SIDE OUTLET ELBOWS FOR 2" (50.8 MM) TUBING
CAT. NO. FINISH "C/L" CAT. NO. FINISH "C/L"
HR15PBS Brushed Stainless 1-7/16" (37 mm) HR20PBS Brushed Stainless 1-9/16" (39.3 mm)
HR15PPS Polished Stainless 1-7/16" (37 mm) HR20PPS Polished Stainless 1-9/16" (39.3 mm)
HR15PPB Polished Brass 1-7/16" (37 mm) HR20PPB Polished Brass 1-9/16" (39.3 mm)
CRL Flush Wall Returns W

• Ready to Install NOTE: Use Cat. No. 32629 Metal
• Three Architectural Finishes permanent bond (see page R667)
• Comes With Mounting Hardware

CL
FLUSH WALL RETURNS FOR 1-1/2" (38.1 MM) TUBING FLUSH WALL RETURNS FOR 2" (50.8 MM) TUBING
CAT. NO. FINISH "D" "W" "C/L" CAT. NO. FINISH "D" "W" "C/L"
HR15QBS Brushed Stainless 3" (76.2 mm) 1-7/8" (48 mm) 2-3/4" (70 mm) HR20QBS Brushed Stainless 4" (101.6 mm) 2-1/2" (64 mm) 3" (76 mm)
HR15QPS Polished Stainless 3" (76.2 mm) 1-7/8" (48 mm) 2-3/4" (70 mm) HR20QPS Polished Stainless 4" (101.6 mm) 2-1/2" (64 mm) 3" (76 mm)
HR15QPB Polished Brass 3" (76.2 mm) 1-7/8" (48 mm) 2-3/4" (70 mm) HR20QPB Polished Brass 4" (101.6 mm) 2-1/2" (64 mm) 3" (76 mm)
CRL Ball Type End Caps L
• Ready to Install CL

9/16"
• Comes With Mounting Screws (15 mm)

2-5/8" (66 MM) BALL TYPE END CAPS FOR 1-1/2" (38.1 MM) TUBING 3-5/16" (84 MM) BALL TYPE END CAPS FOR 2" (50.8 MM) TUBING
CAT. NO. FINISH "L" "C/L" CAT. NO. FINISH "L" "C/L"
HR15BBS Brushed Stainless 2-7/8" (73 mm) 1-9/16" (40 mm) HR20BBS Brushed Stainless 3-7/16" (88 mm) 1-13/16" (46 mm)
HR15BPS Polished Stainless 2-7/8" (73 mm) 1-9/16" (40 mm) HR20BPS Polished Stainless 3-7/16" (88 mm) 1-13/16" (46 mm)
HR15BPB Polished Brass 2-7/8" (73 mm) 1-9/16" (40 mm) HR20BPB Polished Brass 3-7/16" (88 mm) 1-13/16" (46 mm)

CRL Mitered Style 90 Degree Corners


MITERED STYLE 90 DEGREE CORNERS FOR 1-1/2" (38.1 MM) TUBING MITERED STYLE 90 DEGREE CORNERS FOR 2" (50.8 MM) TUBING
HR15MCBS Brushed Stainless 2-3/8" (60 mm) 2-3/8" (60 mm) HR20MCBS Brushed Stainless 3-1/8" (80 mm) 3-1/8" (80 mm)
HR15MCPS Polished Stainless 2-3/8" (60 mm) 2-3/8" (60 mm) HR20MCPS Polished Stainless 3-1/8" (80 mm) 3-1/8" (80 mm)
HR15MCPB Polished Brass 2-3/8" (60 mm) 2-3/8" (60 mm) HR20MCPB Polished Brass 3-1/8" (80 mm) 3-1/8" (80 mm)
CRL 135 Degree Flush Angles NOTE: Use Cat. No. 32629 Metal
• Ready to Install CL Contact Cement for a secure and
• Three Architectural Finishes CL
135 es
re
Deg L
135 DEGREE FLUSH ANGLES FOR 1-1/2" (38.1 MM) TUBING 135 DEGREE FLUSH ANGLES FOR 2" (50.8 MM) TUBING
CAT. NO. FINISH "L" LENGTH "C/L" CAT. NO. FINISH "L" LENGTH "C/L"
HR15MBS Brushed Stainless 1-3/4" (45 mm) 1-7/16" (37 mm) HR20MBS Brushed Stainless 2" (50 mm) 1-9/16" (39.3 mm)
HR15MPS Polished Stainless 1-3/4" (45 mm) 1-7/16" (37 mm) HR20MPS Polished Stainless 2" (50 mm) 1-9/16" (39.3 mm)
HR15MPB Polished Brass 1-3/4" (45 mm) 1-7/16" (37 mm) HR20MPB Polished Brass 2" (50 mm) 1-9/16" (39.3 mm)
CRL 147 Degree Flush Angles NOTE: Use Cat. No. 32629 Metal
• Ready to Install CL permanent bond (see page R667)
147 es
re
Deg
L
L
147 DEGREE FLUSH ANGLES FOR 1-1/2" (38.1 MM) TUBING 147 DEGREE FLUSH ANGLES FOR 2" (50.8 MM) TUBING
CAT. NO. FINISH "L" LENGTH "C/L" CAT. NO. FINISH "L" LENGTH "C/L"
HR15ABS Brushed Stainless 1-3/4" (45 mm) 1-9/16" (39.3 mm) HR20ABS Brushed Stainless 2" (50 mm) 1-11/16" (42.4 mm)
HR15APS Polished Stainless 1-3/4" (45 mm) 1-9/16" (39.3 mm) HR20APS Polished Stainless 2" (50 mm) 1-11/16" (42.4 mm)
HR15APB Polished Brass 1-3/4" (45 mm) 1-9/16" (39.3 mm) HR20APB Polished Brass 2" (50 mm) 1-11/16" (42.4 mm)

CRL 90 Degree Side Outlet Elbows

L

90 DEGREE SIDE OUTLET ELBOWS FOR 1-1/2" (38.1 MM) TUBING 90 DEGREE SIDE OUTLET ELBOWS FOR 2" (50.8 MM) TUBING
HR15JBS Brushed Stainless 2" (50 mm) 2" (50 mm) HR20JBS Brushed Stainless 2-3/8" (60 mm) 2-3/8" (60 mm)
HR15JPS Polished Stainless 2" (50 mm) 2" (50 mm) HR20JPS Polished Stainless 2-3/8" (60 mm) 2-3/8" (60 mm)
HR15JPB Polished Brass 2" (50 mm) 2" (50 mm) HR20JPB Polished Brass 2-3/8" (60 mm) 2-3/8" (60 mm)
CRL Flush Tees


FLUSH TEES FOR 1-1/2" (38.1 MM) TUBING FLUSH TEES FOR 2" (50.8 MM) TUBING
CAT. NO. FINISH "H" HEIGHT "W" WIDTH CAT. NO. FINISH "H" HEIGHT "W" WIDTH
HR15KBS Brushed Stainless 2" (50 mm) 2-7/16" (61.4 mm) HR20KBS Brushed Stainless 2-3/8" (60 mm) 2-11/16" (68.5 mm)
HR15KPS Polished Stainless 2" (50 mm) 2-7/16" (61.4 mm) HR20KPS Polished Stainless 2-3/8" (60 mm) 2-11/16" (68.5 mm)
HR15KPB Polished Brass 2" (50 mm) 2-7/16" (61.4 mm) HR20KPB Polished Brass 2-3/8" (60 mm) 2-11/16" (68.5 mm)
CRL End Scrolls

L

END SCROLLS FOR 1-1/2" (38.1 MM) TUBING END SCROLLS FOR 2" (50.8 MM) TUBING
HR15EBS Brushed Stainless 2-15/16" (75 mm) 2-15/16" (75 mm) HR20EBS Brushed Stainless 2-15/16" (75 mm) 3-1/16" (78 mm)
HR15EPS Polished Stainless 2-15/16" (75 mm) 2-15/16" (75 mm) HR20EPS Polished Stainless 2-15/16" (75 mm) 3-1/16" (78 mm)
HR15EPB Polished Brass 2-15/16" (75 mm) 2-15/16" (75 mm) HR20EPB Polished Brass 2-15/16" (75 mm) 3-1/16" (78 mm)

CRL EZ Radius 90 Degree Corners


EZ RADIUS 90 DEGREE CORNERS FOR 1-1/2" (38.1 MM) TUBING EZ RADIUS 90 DEGREE CORNERS FOR 2" (50.8 MM) TUBING
HR15CBS Brushed Stainless 2-9/16" (65 mm) 2-9/16" (65 mm) HR20CBS Brushed Stainless 2-15/16" (75 mm) 2-15/16" (75 mm)
HR15CPS Polished Stainless 2-9/16" (65 mm) 2-9/16" (65 mm) HR20CPS Polished Stainless 2-15/16" (75 mm) 2-15/16" (75 mm)
HR15CPB Polished Brass 2-9/16" (65 mm) 2-9/16" (65 mm) HR20CPB Polished Brass 2-15/16" (75 mm) 2-15/16" (75 mm)
CRL Side Outlet Tees

L

W
SIDE OUTLET TEES FOR 1-1/2" (38.1 MM) TUBING SIDE OUTLET TEES FOR 2" (50.8 MM) TUBING
HR15LBS Brushed Stainless 2" (50 mm) 2-7/16" (61.4 mm) HR20LBS Brushed Stainless 2-3/8" (60 mm) 2-11/16" (68.5 mm)
HR15LPS Polished Stainless 2" (50 mm) 2-7/16" (61.4 mm) HR20LPS Polished Stainless 2-3/8" (60 mm) 2-11/16" (68.5 mm)
HR15LPB Polished Brass 2" (50 mm) 2-7/16" (61.4 mm) HR20LPB Polished Brass 2-3/8" (60 mm) 2-11/16" (68.5 mm)
CRL Flush Crosses

W

L permanent bond (see page R667)
FLUSH CROSSES FOR 1-1/2" (38.1 MM) TUBING FLUSH CROSSES FOR 2" (50.8 MM) TUBING
HR15NBS Brushed Stainless 2-7/16" (61.4 mm) 2-7/16" (61.4 mm) HR20NBS Brushed Stainless 2-11/16" (68.5 mm) 2-11/16" (68.5 mm)
HR15NPS Polished Stainless 2-7/16" (61.4 mm) 2-7/16" (61.4 mm) HR20NPS Polished Stainless 2-11/16" (68.5 mm) 2-11/16" (68.5 mm)
HR15NPB Polished Brass 2-7/16" (61.4 mm) 2-7/16" (61.4 mm) HR20NPB Polished Brass 2-11/16" (68.5 mm) 2-11/16" (68.5 mm)

CRL Ball Type Inline Outlets CL

9/16"
• Ready to Install (15 mm)

• Comes With Mounting Screws

L permanent bond (see page R667)
2-5/8" (66 MM) BALL TYPE INLINE OUTLETS FOR 1-1/2" (38.1 MM) TUBING 3-5/16" (84 MM) BALL TYPE INLINE OUTLETS FOR 2" (50.8 MM) TUBING
HR15BABS Brushed Stainless 3-1/8" (80 mm) 1-9/16" (40 mm) HR20BABS Brushed Stainless 3-5/8" (92 mm) 1-13/16" (46 mm)
HR15BAPS Polished Stainless 3-1/8" (80 mm) 1-9/16" (40 mm) HR20BAPS Polished Stainless 3-5/8" (92 mm) 1-13/16" (46 mm)
HR15BAPB Polished Brass 3-1/8" (80 mm) 1-9/16" (40 mm) HR20BAPB Polished Brass 3-5/8" (92 mm) 1-13/16" (46 mm)
CRL 90 Degree Ball Type Elbows

L
CL

9/16" (15 mm) Contact Cement for a secure and
2-5/8" (66 MM) 90 DEGREE BALL TYPE ELBOWS FOR 1-1/2" (38.1 MM) TUBING 3-5/16" (84 MM) 90 DEGREE BALL TYPE ELBOWS FOR 2" (50.8 MM) TUBING
HR15BHBS Brushed Stainless 2-7/8" (73 mm) 1-9/16" (40 mm) HR20BHBS Brushed Stainless 3-7/16" (88 mm) 1-13/16" (46 mm)
HR15BHPS Polished Stainless 2-7/8" (73 mm) 1-9/16" (40 mm) HR20BHPS Polished Stainless 3-7/16" (88 mm) 1-13/16" (46 mm)
HR15BHPB Polished Brass 2-7/8" (73 mm) 1-9/16" (40 mm) HR20BHPB Polished Brass 3-7/16" (88 mm) 1-13/16" (46 mm)
CRL 135 Degree Ball Type Elbows

CL

9/16" (15 mm)
2-5/8" (66 MM) 135 DEGREE BALL TYPE ELBOWS FOR 1-1/2" (38.1 MM) TUBING 3-5/16" (84 MM) 135 DEGREE BALL TYPE ELBOWS FOR 2" (50.8 MM) TUBING
HR15BMBS Brushed Stainless 1-9/16" (40 mm) HR20BMBS Brushed Stainless 1-13/16" (46 mm)
HR15BMPS Polished Stainless 1-9/16" (40 mm) HR20BMPS Polished Stainless 1-13/16" (46 mm)
HR15BMPB Polished Brass 1-9/16" (40 mm) HR20BMPB Polished Brass 1-13/16" (46 mm)

CRL 90 Degree Ball Type Side Outlet Elbows L

CL
9/16"
• Comes With Mounting Screws (15 mm)
9/16"
CL (15 mm) NOTE: Use Cat. No. 32629 Metal
2-5/8" (66 MM) 90 DEGREE BALL TYPE SIDE OUTLET ELBOWS 3-5/16" (84 MM) 90 DEGREE BALL TYPE SIDE OUTLET ELBOWS
FOR 1-1/2" (38.1 MM) TUBING FOR 2" (50.8 MM) TUBING
HR15BJBS Brushed Stainless 2-7/8" (73 mm) 1-9/16" (40 mm) HR20BJBS Brushed Stainless 3-7/16" (88 mm) 1-13/16" (46 mm)
HR15BJPS Polished Stainless 2-7/8" (73 mm) 1-9/16" (40 mm) HR20BJPS Polished Stainless 3-7/16" (88 mm) 1-13/16" (46 mm)
HR15BJPB Polished Brass 2-7/8" (73 mm) 1-9/16" (40 mm) HR20BJPB Polished Brass 3-7/16" (88 mm) 1-13/16" (46 mm)
CRL Ball Type Tees L
CL
• Ready to Install 9/16"
(15 mm)
CL
9/16" (15 mm) permanent bond (see page R667)
2-5/8" (66 MM) BALL TYPE TEES FOR 1-1/2" (38.1 MM) TUBING 3-5/16" (84 MM) BALL TYPE TEES FOR 2" (50.8 MM) TUBING
HR15BKBS Brushed Stainless 3-1/8" (80 mm) 1-9/16" (40 mm) HR20BKBS Brushed Stainless 3-5/8" (92 mm) 1-13/16" (46 mm)
HR15BKPS Polished Stainless 3-1/8" (80 mm) 1-9/16" (40 mm) HR20BKPS Polished Stainless 3-5/8" (92 mm) 1-13/16" (46 mm)
HR15BKPB Polished Brass 3-1/8" (80 mm) 1-9/16" (40 mm) HR20BKPB Polished Brass 3-5/8" (92 mm) 1-13/16" (46 mm)
CRL Ball Type Side Outlet Tees CL

L

(15 mm)
CL

9/16" (15 mm) permanent bond (see page R667)
2-5/8" (66 MM) BALL TYPE SIDE OUTLET TEES FOR 1-1/2" (38.1 MM) TUBING 3-5/16" (84 MM) BALL TYPE SIDE OUTLET TEES FOR 2" (50.8 MM) TUBING
HR15BLBS Brushed Stainless 3-1/8" (80 mm) 1-9/16" (40 mm) HR20BLBS Brushed Stainless 3-5/8" (92 mm) 1-13/16" (46 mm)
HR15BLPS Polished Stainless 3-1/8" (80 mm) 1-9/16" (40 mm) HR20BLPS Polished Stainless 3-5/8" (92 mm) 1-13/16" (46 mm)
HR15BLPB Polished Brass 3-1/8" (80 mm) 1-9/16" (40 mm) HR20BLPB Polished Brass 3-5/8" (92 mm) 1-13/16" (46 mm)

CRL Ball Type Crosses CL

L

(15 mm)
CL NOTE: Use Cat. No. 32629 Metal

9/16" (15 mm)
2-5/8" (66 MM) BALL TYPE CROSSES FOR 1-1/2" (38.1 MM) TUBING 3-5/16" (84 MM) BALL TYPE CROSSES FOR 2" (50.8 MM) TUBING
HR15BNBS Brushed Stainless 3-1/8" (80 mm) 1-9/16" (40 mm) HR20BNBS Brushed Stainless 3-5/8" (92 mm) 1-13/16" (46 mm)
HR15BNPS Polished Stainless 3-1/8" (80 mm) 1-9/16" (40 mm) HR20BNPS Polished Stainless 3-5/8" (92 mm) 1-13/16" (46 mm)
HR15BNPB Polished Brass 3-1/8" (80 mm) 1-9/16" (40 mm) HR20BNPB Polished Brass 3-5/8" (92 mm) 1-13/16" (46 mm)
CRL 135 Degree Ball Type Side Outlet Elbows

CL CL

L
CL
9/16" (15 mm) 9/16" (15 mm)

2-5/8" (66 MM) 135 DEGREE BALL TYPE SIDE OUTLET ELBOWS 3-5/16" (84 MM) 135 DEGREE BALL TYPE SIDE OUTLET ELBOWS
HR15BPBS Brushed Stainless 2-7/8" (73 mm) 1-9/16" (40 mm) HR20BPBS Brushed Stainless 3-7/16" (88 mm) 1-13/16" (46 mm)
HR15BPPS Polished Stainless 2-7/8" (73 mm) 1-9/16" (40 mm) HR20BPPS Polished Stainless 3-7/16" (88 mm) 1-13/16" (46 mm)
HR15BPPB Polished Brass 2-7/8" (73 mm) 1-9/16" (40 mm) HR20BPPB Polished Brass 3-7/16" (88 mm) 1-13/16" (46 mm)
C
CRL Ball Type Angle Collars Radius

CL permanent bond (see page R667)
2-5/8" (66 MM) BALL TYPE ANGLE COLLARS FOR 1-1/2" (38.1 MM) TUBING 3-5/16" (84 MM) BALL TYPE ANGLE COLLARS FOR 2" (50.8 MM) TUBING
CAT. NO. FINISH "C" "C/L" CAT. NO. FINISH "C" "C/L"
HR15ACBS Brushed Stainless 3/8" (9.5 mm) 1-1/2" (38.8 mm) HR20ACBS Brushed Stainless 1/2" (12.5 mm) 2" (50.8 mm)
HR15ACPS Polished Stainless 3/8" (9.5 mm) 1-1/2" (38.8 mm) HR20ACPS Polished Stainless 1/2" (12.5 mm) 2" (50.8 mm)
HR15ACPB Polished Brass 3/8" (9.5 mm) 1-1/2" (38.8 mm) HR20ACPB Polished Brass 1/2" (12.5 mm) 2" (50.8 mm)
CRL Collar Attaching Cap Bolt and Riv-Nut

SHCS14X1 1/4"-20 x 1" Stainless Steel Socket Head Cap Bolt
RN1420 1/4"-20 Thread Riv-Nut
Inserted Compressed CAT. NO. SHCS14X1 CAT. NO. RN1420

CRL 135 Degree Ball Type Side Outlet Tees

• Comes With Mounting Screws CL CL
L
CL
9/16" (15 mm) 9/16" (15 mm)

2-5/8" (66 MM) 135 DEGREE BALL TYPE SIDE OUTLET TEES 3-5/16" (84 MM) 135 DEGREE BALL TYPE SIDE OUTLET TEES
HR15BQBS Brushed Stainless 3-1/8" (80 mm) 1-9/16" (40 mm) HR20BQBS Brushed Stainless 3-5/8" (92 mm) 1-13/16" (46 mm)
HR15BQPS Polished Stainless 3-1/8" (80 mm) 1-9/16" (40 mm) HR20BQPS Polished Stainless 3-5/8" (92 mm) 1-13/16" (46 mm)
HR15BQPB Polished Brass 3-1/8" (80 mm) 1-9/16" (40 mm) HR20BQPB Polished Brass 3-5/8" (92 mm) 1-13/16" (46 mm)
CRL Ball Type Outlet Crosses L

(15 mm)
CL CL
9/16" (15 mm) 9/16" (15 mm)

2-5/8" (66 MM) BALL TYPE SIDE OUTLET CROSSES 3-5/16" (84 MM) BALL TYPE SIDE OUTLET CROSSES
HR15BRBS Brushed Stainless 3-1/8" (80 mm) 1-9/16" (40 mm) HR20BRBS Brushed Stainless 3-5/8" (92 mm) 1-13/16" (46 mm)
HR15BRPS Polished Stainless 3-1/8" (80 mm) 1-9/16" (40 mm) HR20BRPS Polished Stainless 3-5/8" (92 mm) 1-13/16" (46 mm)
HR15BRPB Polished Brass 3-1/8" (80 mm) 1-9/16" (40 mm) HR20BRPB Polished Brass 3-5/8" (92 mm) 1-13/16" (46 mm)
CRL Flush Wall Mount Tees NOTE: Use Cat. No. 32629 Metal
• Ready to Install D permanent bond (see page R667)

CL
W
FLUSH WALL MOUNT TEES FOR 1-1/2" (38.1 MM) TUBING FLUSH WALL MOUNT TEES FOR 2" (50.8 MM) TUBING
CAT. NO. FINISH "D" "W" "C/L" CAT. NO. FINISH "D" "W" "C/L"
HR15UBS Brushed Stainless 3" (76.5 mm) 2-1/4" (57 mm) 2-3/4" (70 mm) HR20UBS Brushed Stainless 4" (101.6 mm) 3-1/16" (77 mm) 3" (76 mm)
HR15UPS Polished Stainless 3" (76.5 mm) 2-1/4" (57 mm) 2-3/4" (70 mm) HR20UPS Polished Stainless 4" (101.6 mm) 3-1/16" (77 mm) 3" (76 mm)
HR15UPB Polished Brass 3" (76.5 mm) 2-1/4" (57 mm) 2-3/4" (70 mm) HR20UPB Polished Brass 4" (101.6 mm) 3-1/16" (77 mm) 3" (76 mm)

CRL Full Flanges • Ready to Install


D Contact Cement for a secure and
FULL FLANGES FOR 1-1/2" (38.1 MM) TUBING FULL FLANGES FOR 2" (50.8 MM) TUBING
CAT. NO. FINISH "D" "H" CAT. NO. FINISH "D" "H"
HR15YBS Brushed Stainless 2-15/16" (75 mm) 1-1/8" (28 mm) HR20YBS Brushed Stainless 3-15/16" (100 mm) 1-3/16" (30 mm)
HR15YPS Polished Stainless 2-15/16" (75 mm) 1-1/8" (28 mm) HR20YPS Polished Stainless 3-15/16" (100 mm) 1-3/16" (30 mm)
HR15YPB Polished Brass 2-15/16" (75 mm) 1-1/8" (28 mm) HR20YPB Polished Brass 3-15/16" (100 mm) 1-3/16" (30 mm)
CRL Cut Flanges • Ready to Install

W HH
CUT FLANGES FOR 1-1/2" (38.1 MM) TUBING DD CUT FLANGES FOR 2" (50.8 MM) TUBING
CAT. NO. FINISH "D" "W" "H" CAT. NO. FINISH "D" "W" "H"
HR15ZBS Brushed Stainless 2-15/16" (75 mm) 2" (50 mm) 1-1/8" (28.3 mm) HR20ZBS Brushed Stainless 4" (102 mm) 2-5/8" (66.9 mm) 1-1/8" (28.3 mm)
HR15ZPS Polished Stainless 2-15/16" (75 mm) 2" (50 mm) 1-1/8" (28.3 mm) HR20ZPS Polished Stainless 4" (102 mm) 2-5/8" (66.9 mm) 1-1/8" (28.3 mm)
HR15ZPB Polished Brass 2-15/16" (75 mm) 2" (50 mm) 1-1/8" (28.3 mm) HR20ZPB Polished Brass 4" (102 mm) 2-5/8" (66.9 mm) 1-1/8" (28.3 mm)
CRL Steel Flanges and Canopies

• Ready to Install • Comes With Mounting Screws
• Three Architectural Finishes • Available as a Complete Kit or the Canopy Only
Warning: Not designed for

Internal Steel Guard Rail Applications
Stanchion
12"
L mm)
(304.8
1-1/2" Cover
(38.1 mm) Canopy
Steel Base
Flange
DD 1" NOTE: Use Cat. No. 32629 Metal
3/8" (25.4 mm) Contact Cement for a secure and
Canopy slips over Steel Flange (10 mm) permanent bond (see page R667)
STEEL FLANGES AND CANOPIES FOR 1-1/2" (38.1 MM) TUBING STEEL FLANGES AND CANOPIES FOR 2" (50.8 MM) TUBING
KIT CANOPY ONLY KIT CANOPY ONLY
CAT. NO. CAT. NO. FINISH "D" CAT. NO CAT. NO FINISH "D"
HR15XBS HR15XCBS Brushed Stainless 4-5/8" (117.5 mm) HR20XBS HR20XCBS Brushed Stainless 5" (127 mm)
HR15XPS HR15XCPS Polished Stainless 4-5/8" (117.5 mm) HR20XPS HR20XCPS Polished Stainless 5" (127 mm)
HR15XPB HR15XCPB Polished Brass 4-5/8" (117.5 mm) HR20XPB HR20XCPB Polished Brass 5" (127 mm)

CRL Floor Sockets With Cap Cap
Floor
Socket
H
FLOOR SOCKET WITH CAP FOR 2" (50.8 MM) TUBING

CAT. NO. FINISH "D" "H" "W"
HR20FSBS Brushed Stainless 5" (125 mm) 4-3/4" (120 mm) 3-1/4" (82.5 mm)
HR20FSPS Polished Stainless 5" (125 mm) 4-3/4" (120 mm) 3-1/4" (82.5 mm)
HR20FSPB Polished Brass 5" (125 mm) 4-3/4" (120 mm) 3-1/4" (82.5 mm)
Minimum order: 1 each. All Hand Rail Fittings can be combined for quantity pricing.
CRL 45 Degree Angle Flanges


45
Degrees

D permanent bond (see page R667)
45 DEGREE ANGLE FLANGES FOR 1-1/2" (38.1 MM) TUBING 45 DEGREE ANGLE FLANGES FOR 2" (50.8 MM) TUBING
CAT. NO. FINISH "D" "C/L" CAT. NO. FINISH "D" "C/L"
HR15AFBS Brushed Stainless 3-1/8" (79 mm) 1-11/16" (42.2 mm) HR20AFBS Brushed Stainless 5" (127 mm) 2-7/16" (62.6 mm)
HR15AFPS Polished Stainless 3-1/8" (79 mm) 1-11/16" (42.2 mm) HR20AFPS Polished Stainless 5" (127 mm) 2-7/16" (62.6 mm)
HR15AFPB Polished Brass 3-1/8" (79 mm) 1-11/16" (42.2 mm) HR20AFPB Polished Brass 5" (127 mm) 2-7/16" (62.6 mm)
CRL Adjustable Flanges


D Contact Cement for a secure and
ADJUSTABLE FLANGES FOR 1-1/2" (38.1 MM) TUBING ADJUSTABLE FLANGES FOR 2" (50.8 MM) TUBING
CAT. NO. FINISH "D" "H" "C/L" CAT. NO. FINISH "D" "H" "C/L"
HR15PFBS Brushed Stainless 3" (76.5 mm) 1-1/4" (32.3 mm) 15/16" (24 mm) HR20PFBS Brushed Stainless 4" (102 mm) 1-11/16" (43 mm) 1-1/4" (32 mm)
HR15PFPS Polished Stainless 3" (76.5 mm) 1-1/4" (32.3 mm) 15/16" (24 mm) HR20PFPS Polished Stainless 4" (102 mm) 1-11/16" (43 mm) 1-1/4" (32 mm)
HR15PFPB Polished Brass 3" (76.5 mm) 1-1/4" (32.3 mm) 15/16" (24 mm) HR20PFPB Polished Brass 4" (102 mm) 1-11/16" (43 mm) 1-1/4" (32 mm)

CRL Adjustable Saddles

CL

ADJUSTABLE SADDLES FOR 1-1/2" (38.1 MM) TUBING ADJUSTABLE SADDLES FOR 2" (50.8 MM) TUBING
HR15VABS Brushed Stainless 2-7/8" (73 mm) HR20VABS Brushed Stainless 3-1/2" (88.9 mm)
HR15VAPS Polished Stainless 2-7/8" (73 mm) HR20VAPS Polished Stainless 3-1/2" (88.9 mm)
HR15VAPB Polished Brass 2-7/8" (73 mm) HR20VAPB Polished Brass 3-1/2" (88.9 mm)
CRL Straight Saddles

CL

STRAIGHT SADDLES FOR 1-1/2" (38.1 MM) TUBING STRAIGHT SADDLES FOR 2" (50.8 MM) TUBING
HR15VSBS Brushed Stainless 2-3/4" (69.9 mm) HR20VSBS Brushed Stainless 3-15/16" (99.6 mm)
HR15VSPS Polished Stainless 2-3/4" (69.9 mm) HR20VSPS Polished Stainless 3-15/16" (99.6 mm)
HR15VSPB Polished Brass 2-3/4" (69.9 mm) HR20VSPB Polished Brass 3-15/16" (99.6 mm)
CRL Perpendicular Collars

CL

D
PERPENDICULAR COLLARS FOR 1-1/2" (38.1 MM) TUBING PERPENDICULAR COLLARS FOR 2" (50.8 MM) TUBING
HR15PCBS Brushed Stainless 1-1/2" (38.1 mm) 7/8" (22.2 mm) HR20PCBS Brushed Stainless 2" (50.8 mm) 1-1/4" (31.7 mm)
HR15PCPS Polished Stainless 1-1/2" (38.1 mm) 7/8" (22.2 mm) HR20PCPS Polished Stainless 2" (50.8 mm) 1-1/4" (31.7 mm)
HR15PCPB Polished Brass 1-1/2" (38.1 mm) 7/8" (22.2 mm) HR20PCPB Polished Brass 2" (50.8 mm) 1-1/4" (31.7 mm)

CRL Coped
Perpendicular Collars
CL

permanent bond (see below)
D
COPED PERPENDICULAR COLLARS FOR 1-1/2" (38.1 MM) TUBING COPED PERPENDICULAR COLLARS FOR 2" (50.8 MM) TUBING
HR15CCBS Brushed Stainless 1-1/2" (38.1 mm) 1" (25.4 mm) HR20CCBS Brushed Stainless 2" (50.8 mm) 1-1/4" (31.7 mm)
HR15CCPS Polished Stainless 1-1/2" (38.1 mm) 1" (25.4 mm) HR20CCPS Polished Stainless 2" (50.8 mm) 1-1/4" (31.7 mm)
HR15CCPB Polished Brass 1-1/2" (38.1 mm) 1" (25.4 mm) HR20CCPB Polished Brass 2" (50.8 mm) 1-1/4" (31.7 mm)
CRL Metal Contact Cement

• Strength of an Epoxy and the Speed of
an Instant Adhesive
• Permanently Bonds Cap Rails, Hand Rails,
and Their Accessories With Superior Strength,
Holding Power Up to 2,700 psi
• Offers Handling Strength in 60 Seconds,
Full Cure in 24 Hours
To permanently bond Rails and their accessories we

suggest this strong adhesive system from Loctite®, with two
different Primers to best suit your assembly time frame.
Use Cat. No. 7649 Primer to activate in 60 seconds,
60% of full strength in two minutes, and a full cure in 24
hours. When a longer curing time is needed use Cat. No.
7075 Primer to activate in five minutes, 60% of full strength
in ten minutes, and a full cure in 24 hours.
For best performance surfaces should be clean and free
of grease. Simply apply a generous amount of Primer to
both of the bond surfaces and apply Adhesive to one of the
surfaces. Position parts quickly and exactly as Adhesive
begins to work immediately. Excess Adhesive outside
joined surfaces can be wiped away with an organic solvent.
CAT. NO. DESCRIPTION ACTIVATION CONTENTS

32629 Metal Contact Cement --- 1.69 Fl. Oz. (50 ml)
7649 Primer for Metal Contact Cement 60 Seconds 1.75 Fl. Oz. (52 ml)
7075 Primer for Metal Contact Cement 5 Minutes 4.5 Oz. (133 ml)
CAT. NO. 32629 CAT. NO. 7649 CAT. NO. 7075
Cement 60 Second Primer 5 Minute Primer

CRL Surface Mounted Short Arm Hand Railing Bracket

W
CL
• For 1-1/2" or 2" (38.1 or 50.8 mm)
Diameter Hand Rail Tubing
H
2-7/16"
(62 mm)
FOR 1-1/2" (38.1 MM) DIAMETER HAND RAIL TUBING FOR 2" (50.8 MM) DIAMETER HAND RAIL TUBING
CAT. NO. FINISH C/L-"W" C/L-"H" CAT. NO. FINISH C/L-"W" C/L-"H"
HR15TBS Brushed Stainless 2-7/16" (62 mm) 3-3/16" (81 mm) HR20TBS Brushed Stainless 2-7/16" (62 mm) 3-7/16" (87 mm)
HR15TPS Polished Stainless 2-7/16" (62 mm) 3-3/16" (81 mm) HR20TPS Polished Stainless 2-7/16" (62 mm) 3-7/16" (87 mm)
HR15TPB Polished Brass 2-7/16" (62 mm) 3-3/16" (81 mm) HR20TPB Polished Brass 2-7/16" (62 mm) 3-7/16" (87 mm)
Minimum order: 1 each. All Railing Brackets can be combined for quantity pricing. Minimum order: 1 each. All Railing Brackets can be combined for quantity pricing.
CRL Surface Mounted Long Arm Hand Railing Bracket

W
• For 1-1/2" or 2" (38.1 or 50.8 mm) CL
H
2-5/16"
(59 mm)
HR15B3BS Brushed Stainless 2-5/8" (66 mm) 2-3/16" (56 mm) HR20B3BS Brushed Stainless 2-5/8" (66 mm) 2-7/16" (62 mm)
HR15B3PS Polished Stainless 2-5/8" (66 mm) 2-3/16" (56 mm) HR20B3PS Polished Stainless 2-5/8" (66 mm) 2-7/16" (62 mm)
HR15B3PB Polished Brass 2-5/8" (66 mm) 2-3/16" (56 mm) HR20B3PB Polished Brass 2-5/8" (66 mm) 2-7/16" (62 mm)
CRL Concealed Surface Mounted Hand Railing Bracket Supplied with Hanger Bolt
W
see page R818 for additional
mounting hardware
• For 1-1/2" or 2" (38.1 or 50.8 mm) CL 5/16"-18
Bolt Thread
H
2-3/8"
(60 mm)
HR15B4BS Brushed Stainless 2-15/16" (75 mm) 2-1/2" (63.5 mm) HR20B4BS Brushed Stainless 2-15/16" (75 mm) 2-3/4" (70 mm)
HR15B4PS Polished Stainless 2-15/16" (75 mm) 2-1/2" (63.5 mm) HR20B4PS Polished Stainless 2-15/16" (75 mm) 2-3/4" (70 mm)
HR15B4PB Polished Brass 2-15/16" (75 mm) 2-1/2" (63.5 mm) HR20B4PB Polished Brass 2-15/16" (75 mm) 2-3/4" (70 mm)

CRL Glass Mounted Hand Railing Bracket

L W
• Three Architectural Finishes C
• For 1-1/2" or 2" (38.1 or 50.8 mm) CL CL 5/16"-18

Bolt Thread
H
2-3/8"
(60 mm)
NOTE: Requires 3/4" (19 mm) hole in glass
HR15GBS Brushed Stainless 2-15/16" (75 mm) 2-1/2" (63.5 mm) HR20GBS Brushed Stainless 2-15/16" (75 mm) 2-3/4" (70 mm)
HR15GPS Polished Stainless 2-15/16" (75 mm) 2-1/2" (63.5 mm) HR20GPS Polished Stainless 2-15/16" (75 mm) 2-3/4" (70 mm)
HR15GPB Polished Brass 2-15/16" (75 mm) 2-1/2" (63.5 mm) HR20GPB Polished Brass 2-15/16" (75 mm) 2-3/4" (70 mm)
CRL 2-Way Adjustable Glass Mounted Hand Railing Bracket

CL
CL
• For 1-1/2" or 2" (38.1 or 50.8 mm) 5/16"-18
Diameter Hand Rail Tubing Bolt Thread
H
2-3/8"
(60 mm)

HR15GABS Brushed Stainless 2-15/16" (75 mm) 2-15/16" (75 mm) HR20GABS Brushed Stainless 2-15/16" (75 mm) 3-1/4" (82.5 mm)
HR15GAPS Polished Stainless 2-15/16" (75 mm) 2-15/16" (75 mm) HR20GAPS Polished Stainless 2-15/16" (75 mm) 3-1/4" (82.5 mm)
HR15GAPB Polished Brass 2-15/16" (75 mm) 2-15/16" (75 mm) HR20GAPB Polished Brass 2-15/16" (75 mm) 3-1/4" (82.5 mm)
CRL 2-Way Adjustable Concealed Surface Mounted

Hand Railing Bracket Supplied with Hanger Bolt
mounting hardware
W
• For 1-1/2" or 2" (38.1 or 50.8 mm) CL
Diameter Hand Rail Tubing 5/16"-18

Bolt Thread
H
2-3/8"
(60 mm)
HR15WABS Brushed Stainless 2-15/16" (75 mm) 2-15/16" (75 mm) HR20WABS Brushed Stainless 2-15/16" (75 mm) 3-1/4" (82.5 mm)
HR15WAPS Polished Stainless 2-15/16" (75 mm) 2-15/16" (75 mm) HR20WAPS Polished Stainless 2-15/16" (75 mm) 3-1/4" (82.5 mm)
HR15WAPB Polished Brass 2-15/16" (75 mm) 2-15/16" (75 mm) HR20WAPB Polished Brass 2-15/16" (75 mm) 3-1/4" (82.5 mm)

Supplied with Hanger Bolt

CRL 3-Way Adjustable Concealed see page R818 for additional
mounting hardware
Surface Mounted Hand 3 to 3-5/16"
CL (76.2 to 84.1 mm)
Railing Bracket
CL
• Ready to Install 3/8"-16
Bolt Thread
H
Plus Mill Aluminum
• For 1-1/2", 1.9" or 2" 3"
(76.2 mm)
(38.1, 48.3 or 50.8 mm)
Diameter Hand Rail Tubing Optional Flat Hand Rail
Adapter Plate
*CAT. NO. HBFP1
FOR 1-1/2", 1.9" OR 2" (38.1, 48.3 OR 50.8 MM) DIAMETER HAND RAIL TUBING
CAT. NO. FINISH 1-1/2" C/L-"H" 1.9" & 2" C/L-"H" CAT. NO. FINISH 1-1/2" C/L-"H" 1.9" & 2" C/L-"H"
HR2DWMA Mill Aluminum 3" (76.2 mm) 3-1/4" (82.5 mm) HR2DWBS Brushed Stainless 3" (76.2 mm) 3-1/4" (82.5 mm)
HR2DWSA Satin Anodized 3" (76.2 mm) 3-1/4" (82.5 mm) HR2DWPS Polished Stainless 3" (76.2 mm) 3-1/4" (82.5 mm)
HR2DWDU Dark Bronze Anodized 3" (76.2 mm) 3-1/4" (82.5 mm) HR2DWPB Polished Brass 3" (76.2 mm) 3-1/4" (82.5 mm)
Minimum order: 1 each. All Railing Brackets can be combined for quantity pricing. * Specify finish at time of order.
CRL 3-Way Adjustable Glass

Mounted Hand Railing Bracket 3 to 3-5/16"
CL (76.2 to 84.1 mm)
CL 3/8"-16
• Five Architectural Finishes Bolt Thread
Plus Mill Aluminum H
• For 1-1/2", 1.9" or 2"
(38.1, 48.3 or 50.8 mm) 3"
(76.2 mm)
Diameter Hand Rail Tubing Optional Flat Hand Rail
Adapter Plate

*CAT. NO. HBFP1
HR2DGMA Mill Aluminum 3" (76.2 mm) 3-1/4" (82.5 mm) HR2DGBS Brushed Stainless 3" (76.2 mm) 3-1/4" (82.5 mm)
HR2DGSA Satin Anodized 3" (76.2 mm) 3-1/4" (82.5 mm) HR2DGPS Polished Stainless 3" (76.2 mm) 3-1/4" (82.5 mm)
HR2DGDU Dark Bronze Anodized 3" (76.2 mm) 3-1/4" (82.5 mm) HR2DGPB Polished Brass 3" (76.2 mm) 3-1/4" (82.5 mm)
CRL 2-Way Adjustable Concealed Post 3/8"-16

Bolt Thread
Mounted Hand Railing Bracket 3-7/8"
1-1/4" to 1-1/2"
(31.8 to 38.1 mm)
(Supplied)
CL
(98.4 mm)
• Ready to Mount to Either 1-1/4"
or 1-1/2" (31.8 or 38.1 mm) Schedule CL
40 Vertical Posts
H
Plus Mill Aluminum
• For 1-1/2", 1.9" or 2" Removable Coped
(38.1, 48.3 or 50.8 mm) Adapter for Flat Post Optional Flat Hand Rail
Applications Adapter Plate
*CAT. NO. HBFP1
HR2SPMA Mill Aluminum 2-9/16" (65 mm) 2-13/16" (71.4 mm) HR2SPBS Brushed Stainless 2-9/16" (65 mm) 2-13/16" (71.4 mm)
HR2SPSA Satin Anodized 2-9/16" (65 mm) 2-13/16" (71.4 mm) HR2SPPS Polished Stainless 2-9/16" (65 mm) 2-13/16" (71.4 mm)
HR2SPDU Dark Bronze Anodized 2-9/16" (65 mm) 2-13/16" (71.4 mm) HR2SPPB Polished Brass 2-9/16" (65 mm) 2-13/16" (71.4 mm)

CRL 2-Way Adjustable Wall Mounted Supplied with Hanger Bolt

Hand Railing Bracket CL 2-7/8"
mounting hardware
(73 mm) 3/8"-16

• Ready to Install Bolt Thread
Plus Mill Aluminum CL
• For 1-1/2", 1.9" or 2" H

(38.1, 48.3 or 50.8 mm)
Diameter Hand Rail Tubing 3"
(76 mm) Optional Flat Hand Rail
Adapter Plate
*CAT. NO. HBFP1
HR2SWMA Mill Aluminum 2-9/16" (65 mm) 2-13/16" (71.4 mm) HR2SWBS Brushed Stainless 2-9/16" (65 mm) 2-13/16" (71.4 mm)
HR2SWSA Satin Anodized 2-9/16" (65 mm) 2-13/16" (71.4 mm) HR2SWPS Polished Stainless 2-9/16" (65 mm) 2-13/16" (71.4 mm)
HR2SWDU Dark Bronze Anodized 2-9/16" (65 mm) 2-13/16" (71.4 mm) HR2SWPB Polished Brass 2-9/16" (65 mm) 2-13/16" (71.4 mm)
CRL Glass Mounted Hand Railing Bracket

CL
new
2-15/16"
(75 mm)
• Two Architectural Finishes CL
Plus Mill Aluminum 3/8"-16
Bolt Thread
• For 1-1/2", 1.9" or 2" H 1/2"
(38.1, 48.3, 50.8 mm) (12 mm)
2"
Diameter Hand Rail Tubing (51 mm)
• Can Also be Used for Wall 3/4" Optional Flat Hand Rail
Mount Applications (19 mm)
3/8" Adapter Plate
(9.5 mm) *CAT. NO. HBFP1
CAT. NO. FINISH C/L-"W" 1-1/2" C/L-"H" 1.9" & 2" C/L-"H"
HR2EGBS Brushed Stainless 2-15/16" (75 mm) 2-1/2" (63.5 mm) 2-11/16" (68 mm)
HR2EGPS Polished Stainless 2-15/16" (75 mm) 2-1/2" (63.5 mm) 2-11/16" (68 mm)
HR2EGMA Mill Aluminum 2-15/16" (75 mm) 2-1/2" (63.5 mm) 2-11/16" (68 mm)
CRL Post Mounted Hand Railing Bracket

CL 2-11/16"
new 3/8"-16
Bolt Thread
(Supplied)
(68 mm) 1-1/4" to 1-1/2"
• Ready to Install (31.8 to 38.1 mm)
• Two Architectural Finishes CL
Plus Mill Aluminum
• For 1-1/2", 1.9" or 2" H
1/2"
(38.1, 48.3, 50.8 mm) (12 mm)
• Ready to Mount to 1-1/4" 3/4"
or 1-1/2" (31.8 or 38.1 mm) (19 mm)
Optional Flat Hand Rail
Schedule 40 Vertical Posts Removable Coped Adapter Plate
Adapter for Flat
Post Applications *CAT. NO. HBFP1
CAT. NO. FINISH C/L-"W" 1-1/2" C/L-"H" 1.9" & 2" C/L-"H"
HR2EPBS Brushed Stainless 2-11/16" (68 mm) 2-1/2" (63 mm) 2-11/16" (68 mm)
HR2EPPS Polished Stainless 2-11/16" (68 mm) 2-1/2" (63 mm) 2-11/16" (68 mm)
HR2EPMA Mill Aluminum 2-11/16" (68 mm) 2-1/2" (63 mm) 2-11/16" (68 mm)

CRL Conversion Kit for HR2D or HR2S Series Brackets

• Converts Any HR2D or HR2S Series
Wall Mount Bracket to Glass Mount
• For Use on 1/2" or 3/4" (12 or 19 mm)
Tempered Glass
Plus Mill Aluminum
HR2D OR HR2S SERIES CONVERSION KITS

CAT. NO. FINISH
HR2CKMA Mill Aluminum
HR2CKSA Satin Anodized
HR2CKDU Duranodic Bronze
HR2CKBS Brushed Stainless
HR2CKPS Polished Stainless
HR2CKPB Polished Brass
Front View Back View Minimum order: 1 each. Finishes can be combined for quantity pricing.
CRL Replacement Gaskets and Grommet Packs for Hand Rail Brackets
HR15G, HR20G, HR15GA, and HR20GA Series HR2DG Series
Each CRL Replacement Gasket and Grommet Pack includes two Each CRL Replacement Gasket and Grommet Pack includes two
each 2-5/16" (58.7 mm) diameter Rubber Gaskets and one each 1/2" each 2-5/16" (58.7 mm) diameter Rubber Gaskets and one each
(12.7 mm) Plastic Grommet. Minimum order is one pack. 11/16" (17.5 mm) Plastic Grommet. Minimum order is one pack.
CAT. NO. RGGP1 CAT. NO. RGGP2
CRL Extension Arms for HR2D Series Brackets

• Allows for Up to 2" (50.8 mm)
of Additional Extension from
Mounting Surface
2" 3" to 3-5/16" 1/2"
CL (50.8 mm) CL (76.2 to 84.1 mm) (12.7 mm)
EXTENSION ARMS FOR HR2D SERIES BRACKETS

CAT. NO. FINISH
HR2DXSA Satin Anodized
HR2DXDU Duranodic Bronze
HR2DXBS Brushed Stainless
With HR2DXPS Polished Stainless
Extension Standard
Front View Bracket HR2DXPB Polished Brass

CRL Square Hand Rail Tubing

• Ready to Fabricate
• Two Architectural Finishes Brushed Stainless
1-1/2" (38.1 mm)
• 1-1/2" (38.1 mm) Square
All CRL Square Tubing is formed using precision tooling to maintain

uniform dimensions, allowing for smooth hairline transitions at splices Polished Stainless
and end caps. Use our Cat. No. 32629 Metal Contact Cement (see 1-1/2" (38.1 mm)
page R667) to achieve a secure and permanent bond at all connections.
For Hand Rail Brackets see pages R670-R671.
CAT. NO. DIMENSIONS FINISH THICKNESS LENGTH

HRS15BS 1-1/2" x 1-1/2" (38.1 x 38.1 mm) Brushed Stainless .050" (1.27 mm) 236" (6.0 m)
HRS15PS 1-1/2" x 1-1/2" (38.1 x 38.1 mm) Polished Stainless .050" (1.27 mm) 236" (6.0 m)
Minimum order: 1 each. All Tubing can be combined for quantity pricing. A Packing Charge will be added to orders fewer than five lengths. Must ship common carrier.
CRL Flat Square End Caps W
H
• Install Easily in Seconds
• Two Architectural Stainless Finishes D
CRL Flat End Caps complete the job when used

with our 1-1/2" (38.1 mm) Square Hand Rail Tubing.
They are available in two architectural finishes,
brushed and polished stainless. Use our Cat. No.
32629 Metal Contact Cement (see page R667) to
bond the Cap into the Tubing.
CAT. NO. FINISH "D" DEPTH "W" WIDTH "H" HEIGHT

SA10BS Brushed Stainless 3/4" (19 mm) 1-1/2" (38.1 mm) 1/8" (3.2 mm)
SA10PS Polished Stainless 3/4" (19 mm) 1-1/2" (38.1 mm) 1/8" (3.2 mm)
CRL Square Hand Railing Connector Sleeves

• Provide Proper Alignment Between Railing Splices
• Formed, Shaped to Fit and Ready to Install
CRL Square Connector Sleeves are used to connect and provide proper alignment
between Hand Railing splices. The 5" (127 mm) long Connector Sleeves must be
compressed to fit inside the Hand Railing. Use our Cat. No. 32629 Metal Contact
Cement (see page R667) to achieve a secure and permanent bond at all connections.
Important Installation Note: Always Use Connector Sleeves Made of the Same Metal as the Cap Rail,
Cap Rail Corner, or Hand Rail Metal.
CAT. NO. FINISH USE WITH

HRS15CSS Stainless Steel HRS15BS/HRS15PS 1-1/2" (38.1 mm) Stainless Steel Hand Railing Tubing

CRL Wood Hand Rails new

• 10' (3.05 m) Stock Lengths
• Custom Diameters and Shapes
also Available
CRL Wood Hand Rails are available in many
different types of wood in 10 foot (3.05 m) standard
lengths; longer lengths are available on special order
and dependent upon type of wood selected. Delivery
is dependent on availability of the wood and production
time. All Wood Hand Rails ship unfinished, and are
ready to be stained at the job site.
120" (3.05 M) WOOD HAND RAIL LENGTHS

1-1/2" (38.1 MM) 2" (50.8 MM) WOOD
DIAMETER DIAMETER TYPE
WD15WL WD20WL Walnut
WD15CR WD20CR Cherry
WD15MG WD20MG Mahogany
WD15W0 WD20W0 White Oak
WD15R0 WD20R0 Red Oak
WD15AS WD20AS Ash
WD15PL WD20PL Poplar
WD15MP WD20MP Maple
Minimum order: 1 each. All Wood Rails are F.O.B. the nearest CRL regional warehouse.
CRL Titebond® III Wood Glue CRL Wood Biscuits new

• Waterproof Formula • Provides Excellent Holding Power
• Designed for Interior and Exterior Applications • Made From Compressed Crosshatched
• Assembly Time: 10 minutes Beechwood
• Set Time: 24 Hours new • Installs With Wood Glue
• Clamping Time: 30 Minutes
Use CRL Titebond® III Wood Glue when joining Wood Cap
Use CRL Wood Biscuits when joining Wood Cap Rails and mitered
Rails, mitered Wood Hand Rail Corners, and installing Wood
Wood Hand Rail Corners. Die-cut from beechwood blanks, these
End Caps. This waterproof, water based formula passes Type 1
biscuits are compressed for strength and crosshatched for better glue
water-resistance specifications and conforms to ASTM D-4236.
bonding. When used with water based glue, the 1/8" (3.2 mm) thick
Unaffected by finishes, this Glue will fully setup within 24 hours
Biscuit swells within the joint providing excellent holding power.
and is designed for interior and exterior applications.
CAT. NO. CONTENTS CAT. NO. "H" HEIGHT "W" WIDTH QTY/CTN
CRLWG1 8 Oz. (236 ml) CRLWB1 5/8" (15.9 mm) 1-11/16" (42.9 mm) 25 Biscuits
Minimum order: 1 each. Minimum order: 1 carton.

CRL Hand Railing Hand Rails

Quote/Order Checklist Online
This Hand Railing Quote/Order Checklist is designed to assist See pages R504-R505 for
you in covering the details required to complete a Hand Railing details on our web-based
Design and Glass Sizing
installation. Mark the boxes in the Checklist area that apply to Program that makes your
your installation. Going through this exercise should prevent you job easier than ever. A FREE
from overlooking any details related to your installation, and assist 30 day trial is available to
authorized CRL customers.
you in making product selections. The Product Selection area is
where you can actually write down the complete catalog numbers
of the products you have selected.
IMPORTANT: Depending on the complexity of your project, one

or more of the following may be required: sketches or drawings
(with dimensions) of your particular application; printed architectural
drawings or CAD files; photos (preferably digital) of job site conditions.
NOTE: A final sign off is required prior to any custom fabrication.
This form is also available online at crlaurence.com.
Company Name: Phone #:
Project Name: Contact Name:
E-mail Address:
Date:
Checklist: (Fill in All Appropriate Boxes Relating to the Job)
1 Hand Railing Tubing Diameter and Finish (See Pages R653, R673-R674)
1-1/2" (38.1 mm) Round Brushed Stainless Steel US32D Polished Stainless Steel US32 Polished Brass US3 Wood
1-1/2" (38.1 mm) Square Mill Aluminum Duranodic Bronze Satin Anodized Type
1.9" (48.3 mm) Round Brushed Stainless Steel US32D Polished Stainless Steel US32 Polished Brass US3 _________________
2" (50.8 mm) Round
Painted ____________________________________________________ Custom ____________________________________________________________
2 Hand Railing Accessories (See Pages R654-R672)

End Caps Stock Custom
Corners Stock Custom
Elbows and Tees Stock Custom
Flanges Stock Custom
Brackets Glass Mount Wall Mount
Connector Sleeves
Product Selection: (Fill in Appropriate Areas for All Products That Will Be Required for the Job)
PRODUCT CAT. NO. QTY. PRODUCT CAT. NO. QTY.
Hand Railing Tubing Crosses
End Caps Saddles
Wall Returns Collars
Corners/Elbows Metal Contact Cement
Connector Sleeves Other
Fax Completed Checklist to C.R. Laurence Technical Sales at (800) 587-7501 in the U.S., or (323) 584-5289 (Canada and International).
Then call to discuss: (800) 421-6144 (U.S.), (877) 421-6144 (Canada), or (323) 588-1281 (International). Ask for Extension 7730.

CRL ARS ALUMINUM RAILING SYSTEMS Contact CRL Tech Sales for complete planning
CRL ARS Aluminum Railing System

C.R. Laurence Company is now manufacturing a premium Aluminum MANUFACTURED IN THE USA
BY C.R. LAURENCE
Railing System. By specializing in the design and manufacturing of this
innovative system, we are uniquely suited to solve difficult installation issues
and maintain high quality production. By controlling each step from original
design to final shipping, we can provide the highest level of quality control
and lead time reliability for projects anywhere in the world.
Product development is an ongoing process at CRL. Rest assured that
the products we offer will represent the current evolution of railing technology.
In additional to our standard designs, we offer the ability to create custom
railings that address project-specific criteria.

Use CRL's Glass Railing System for projects that are view-oriented.
Glass Railings give buildings a sophisticated appeal. Our various systems
will accept any 1/4" to 1/2" (6 to 12 mm) clear or tinted tempered glass infill
options. Glass Railings also serve as effective wind barriers, further
enhancing the outdoor balcony environment.
Picket Railing System

CRL's Picket Railing System is simple, attractive, and strong. Widely
specified for commercial and residential applications, the Picket Railing
System utilizes 3/4" (19 mm) square or round vertical pickets. Choose
any one of our standard top rail options. Add our decorative cast or water
jet/laser cut infill panels to create a unique architectural accent. For custom
applications, consult CRL Technical Sales.
Cable Railing System

CRL's Cable Railing System is perfect for projects that desire a more
commercial or nautical feel. Using quality 316 alloy cable and stainless steel
hardware, our Cable Railing System performs in the harshest of conditions.
Typical applications utilize horizontal cables spaced 3-1/2" (89 mm) on center.
AWS Windscreen System

CRL's Glass Pool Surrounds and AWS Windscreens are very popular in
hotel and condo applications. This Windscreen System creates an effective
barrier while limiting the confining effect of a typical fence. Used in
conjunction with a concrete slab or masonry wall, these innovative systems
are highly adaptable, structurally sound, and attractive.

CRL ARS ALUMINUM RAILING SYSTEMS For Pricing on CRL Products, Call Toll Free
CRL ARS Aluminum Railing System

CRL's high quality commercial or residential Aluminum Railing We manufacture a comprehensive selection of railing systems that
Systems are manufactured from extruded aluminum framing combine the durability of extruded aluminum with innovative design
members utilizing infill options of tempered glass, aluminum pickets, details. This assures long-term structural integrity and enhances
stainless steel cable, cast or water jet/laser cut infills, that are project aesthetics, while consistently reducing the annual
engineered to meet applicable building code specifications. maintenance expense.
Regardless of style or color, each one of our railing systems
provides superior color retention, impact resistance, and
weatherability in any environment.
Design Options MANUFACTURED IN THE USA

BY C.R. LAURENCE
• Exterior and Interior Hand Rails and Guard Rails An ISO9001:2000 Certified Company
• Infill Panel Options: Aluminum Pickets, Aluminum Pattern Panels,

Clear or Coated Structural Glass, or Stainless Steel Cable
• Custom Gates
• ADA Compliant Grab Rails
• Attractive Low-Voltage, Post Mounted Lighting System for Our
Railing Systems. Using a Safe, 12 Volt Power Source, These
Lights Provide a Subtle Glow That is Sure to Enhance Any Balcony
Environment
Component Features and Benefits

• Innovative Design Details for Standard or Custom Applications
• Extruded Aluminum for Durability, Weather Resistance, and
Low Maintenance
• Heavy Gauge Materials and Steel Embeds for Strength
• Uses 1/4" to 1/2" (6 to 12 mm) Tempered Glass for Safety and
Impact Resistance
Color Selection
• Tough, Powder-Coated or Optional Kynar Paint Colors for
Superior Color Retention and Weather Resistance • 2-3/8" and 4" (60.3 and 101.6 mm) Square
• Special Coating for Resistance to Salt Water Corrosion Posts Available
Our specially formulated coatings are designed to resist the • Seven Standard Powder Paint Colors Available
corrosive effects of salt water, providing a permanent, worry-free (Custom Colors Also Available)
addition to your building. You can choose from one of the seven
standard colors, or one of our 250 additional “Quick Turn” colors.
If you still can't find just the right color, you can send us the
desired color and we can match it for you.
Standard Colors
• In-House Factory Applied
• Baked on TGIC Polyester Powder Coat Paint System
• Excellent Weatherability and Durability
• Meets AAMA 2603-98 Specifications
Additional Color Options

• A Variety of Textured and Performance Enhanced
Powder Coat Paint Systems
• Custom Color Matching
• 50% and 70% Kynar Paint Systems to Meet Stringent Standard Colors
Colors shown are representative only, and may vary
AAMA 2604-98 and 2605-98 Commercial Specifications slightly from actual gloss, color, and texture. If color
• All Paint Systems Will Be Applied Over State-of-the-Art match is critical, please contact Technical Sales for
additional information.
Chromate Pre-Treatment

CRL Aluminum Railing System Mounting Options

CRL's high quality commercial or residential Aluminum Railing Our specially formulated coatings are designed to resist the
Systems are manufactured from extruded aluminum framing corrosive effects of salt water, providing a permanent, worry-free
members utilizing tempered glass, aluminum pickets, stainless steel addition to your building. We manufacture a comprehensive selection
cable, cast or water jet/laser cut infills, that are engineered to meet of railing systems that combine the durability of extruded aluminum
applicable building code specifications. Regardless of style or color, with innovative design details. This assures long-term structural
each one of our railing systems provides superior color retention, integrity and enhances project aesthetics, while consistently reducing
impact resistance, and weatherability in any environment. the annual maintenance expense.
One benefit of the ARS System is that it attaches to just about any The CRL Aluminum Railing System is designed to meet all Guard
substrate with our standard Surface Mount Base Plates. However, Rail Safety Codes, and with so many options, there is a railing system
you do have additional mounting options, as illustrated below. for every application.
Typical Mounting Options
Core Mounted Core Mounted Fascia Mounted Corner Fascia Mount

Installation With Stanchion Installation Installation Installation
Surface Mount
Offset Base
Fascia Mount
Surface Mounted Core Mount

Standard Base
With Moisture Barrier Gasket Corner Fascia
Between Bracket Mount
and Substrate
Surface Mount
Standard Base
Posts for fascia mount installation are

longer than our Posts for surface mounting.
The extra length lets you mount them in our
Fascia Mount Brackets and still reach the rail
heights required by code. See pages R682
to R685 for a comparison.

Infill Options
CRL offers the five Infill Options shown here. Utilizing our
state-of-the-art manufacturing facility we can produce almost
any desired design to meet your project specifications. All of
the Infill Options shown are designed to work with all CRL
Aluminum Railing Systems.
1/4" (6 mm) through 1/2" (12 mm) Tempered Glazing

BY C.R. LAURENCE
Horizontal 1/8" (3.2 mm) Diameter Type 316 Stainless Steel Cable 3/4" (19 mm) Square or Round Aluminum Picket Panels
Cast Aluminum Panels Custom Water Jet/Laser Cut Panels

CRL 100 Series Railing System for Straight Runs MANUFACTURED IN THE USA
BY C.R. LAURENCE
The 100 Series is definitely the most diversified of all of the CRL Aluminum Railing Systems. The reason is simple. It is the only system
that can meet the requirements of both a deck railing, commonly referred to as a guard rail, and also meet code requirements for stairways,
sometimes called hand rails.
This system can be used with glass, cable, picket, cast, or custom designed water jet/laser cut infills. The pickets in this system come
individually, unlike the Picket Panels used in the 200, 300, 350, and 400 Series (see page R711). Because of this, it is necessary to install the
pickets one by one. You will receive spacers to hold pickets in place in the top and bottom rails. These spacers are cut to 3-7/8" (98.4 mm);
the maximum allowable distance pickets can be spaced and still meet current national code requirements.
• 6005-T5 Aluminum Alloy

• Surface Mount, Core Mount or Post Cap
Fascia Mount Applications CAT. NO. PC1
100 Series Top Rail
• Standard Rail Heights are CAT. NO. 1TR241
36" (914 mm), 42" (1066 mm), Rail Connecting Block
and 48" (1219 mm). Custom CAT. NO. RCB1
Rail Connecting Block Screws
Rail Heights Also Available CAT. NO. RCBS
• Glass Infill Panel Options:
1/4" (6mm), 3/8" (10 mm) 2-3/8" (60.3 mm)
or 1/2" (12 mm) Square Post
• Available With Decorative Cast
Infill Panels, 5/8" (15.9 mm)
Square Aluminum Pickets, or
Stainless Steel Cable 100 Series Bottom Rail
CAT. NO. 1BR241
• Custom Water Jet/Laser Cut
Infill Panels Also Available Rail Connecting Block Screws
Glass
CAT. NO. RCBS
• A.D.A. Compliant Guard Rails Rail Connecting Block
and Hand Rails CAT. NO. RCB1
• Seven Standard Colors 5" Square Base Plate Pickets
CAT. NO. BP5
Available From Stock, With
Moisture Barrier Gasket
Custom Colors Also Available CAT. NO. BPG1BL
Maximum Post Spacing

is 72" (1829 mm)
Center-to-Center

CRL 100 Series Railing System for Stairways MANUFACTURED IN THE USA
BY C.R. LAURENCE
The 100 Series also meets code requirements for stairways, sometimes called hand rails. 100 Series Railings are available in seven
standard colors and three standard heights.
100 Series Top Rail
• Deck (Top) Mount or Fascia Mount (See page R689)
Applications in Seven Standard Colors
2"
Available From Stock (50.8 mm)
• Core Mount Applications Also Available
• Standard Rail Heights are 36" (914 mm), 2-1/2"
42" (1066 mm), and 48" (1219 mm). (63.5 mm)
Custom Rail Heights Also Available 1-3/4"
(44.4 mm)
• Glass Infill Panel Options: 1/4" (6 mm), 1-1/2"
3/8" (10 mm) or 1/2" (12 mm) (38.1 mm)
3/4" (19 mm)
• Infill Options: Decorative Solid 5/8" (15.9 mm)
Cast Aluminum Panels, 5/8" (15.9 mm) Square Pickets
Square Pickets, or Stainless Steel Cable
9/16"
• Custom Water Jet/Laser Cut Infill Panels (14.3 mm) 1/4", 3/8", or 1/2"
Also Available (6, 10, or 12 mm)
Tempered Glass
• A.D.A. Compliant Guard Rails and Hand Rails
• Seven Attractive Colors Available From
Stock, With Custom Powder Coat Colors
Also Available
Maximum Post Spacing

is 72" (1829 mm) 100 Series Bottom Rail
Center-to-Center
(See page R689)
1" (25.4 mm)
Pocket Depth
1-7/8"
(47.6 mm)
7/8"
(22.2 mm)
1-3/4"
(44.4 mm)

CRL Surface Mount Post Kits for 100 Series Rails

• 2-3/8" (60.3 mm) Square Post Standard Kits Include:
• Use for 180 Degree, 90 Degree
or End Posts
• Three Standard Post Heights
• Complete With Post Cap, Base Plate,
Moisture Barrier Gasket, Stainless
Washers, Screws, and Bolt
Cover Buttons
• Seven Attractive Colors Available
From Stock, With Custom Powder
Coat Colors Also Available
• 6005 Alloy Aluminum/T5 Temper Posts
CRL 100 Series Surface Mount Post Kits come
complete with Base Plate (BP5), Moisture Barrier
Gasket (BPG1BL), Base Plate Screws (BPS112),
Stainless Steel Washers (WSHR1), Bolt Cover
Buttons (BTN1), and Post Caps (PC1). See page
R719 for Lag Bolts or Anchors for mounting to the STANDARD COLORS
substrate Standard Post Kits are available in your
choice of three heights and seven attractive colors.
Custom heights and colors are also available.
CAT. NO.* DESCRIPTION POST HEIGHT
Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color
1P36K 36" Post Kit 37" (940 mm) match is critical, please contact Technical Sales for additional information.
1P42K 42" Post Kit 43" (1092 mm)
1P48K 48" Post Kit 49" (1244 mm) the ability to color match as well.
Minimum order: 1 each. * Specify powder coat color when ordering.
CRL Post Only for

100 Series Rails
• 2-3/8" (60.3 mm) Square Post
• Use for 180 Degree, 90 Degree or
End Posts
Coat Colors Also Available 2-3/8"
• 6005 Alloy Aluminum/T5 Temper Posts (60.3 mm)
CRL 100 Series Aluminum Posts are available in

your choice of three heights and seven attractive
colors. You can also cut custom posts from our 20'-1" 2-3/8"
(6.12 m) stock length. Custom heights and colors (60.3 mm)
are also available. STANDARD COLORS
CAT. NO.* DESCRIPTION HEIGHT/LENGTH

1P36 36" Post Kit 37" (940 mm)
1P42 42" Post Kit 43" (1092 mm) Gloss Gloss Gloss Gloss Matte Gloss Matte
1P48 48" Post Kit 49" (1244 mm) Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color
P241 20'-1" Stock Length 241" (6.12 m)# match is critical, please contact Technical Sales for additional information.
Minimum order: 1 each. * Specify powder coat color when ordering. Additional Color Options - CRL has over 250 quick turn custom color options with
# Must ship common carrier. the ability to color match as well.

CRL 135 Degree Surface Mount

Post Kits for 100 Series Rails Standard Kits Include:
• Complete With Post Cap, Base Plate,
Moisture Barrier Gasket, Screws,
Stainless Washers, and Bolt
Cover Buttons
• Designed to be Installed Onto
Concrete, Wood, Steel, and Other
Substrates
CRL 135 Degree Post Kits Come complete with Base
Plate (BP5), Moisture Barrier Gasket (BPG1BL), Base
Plate Screws (BPS112), Stainless Steel Washers
(WSHR1), Color Match Bolt Cover Buttons (BTN1),
and Post Cap (PC45). See page R719 for Lag Bolts or
Anchors for mounting to the substrate Standard Post STANDARD COLORS
Kits are available in your choice of three heights and
seven attractive colors. Custom heights and colors
also available.
CAT. NO.* DESCRIPTION POST HEIGHT Gloss Gloss Gloss Gloss Matte Gloss Matte
1P536K 36" Post Kit 37" (940 mm) Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color
match is critical, please contact Technical Sales for additional information.
1P542K 42" Post Kit 43" (1092 mm)
1P548K 48" Post Kit 49" (1244 mm) Additional Color Options - CRL has over 250 quick turn custom color options with
Minimum order: 1 each. *Specify powder coat color when ordering. the ability to color match as well.
CRL 135 Degree Posts Only

for 100 Series Rails
• Three Standard Posts Heights Plus a
Stock Length You Can Cut to the
Needed Size
From Stock, With Custom Powder 2-1/8"
Coat Colors Also Available (54 mm)

CRL 135 Degree Aluminum Posts are available in
colors. Custom heights and colors also available. 2-3/8" 2-3/8"
You can also order our 20'-1" (6.12 m) stock length to (60.3 mm) (60.3 mm)
cut posts of any height required. These Posts are
designed to be installed onto concrete, wood, steel,
and other substrates. Can be core mounted or STANDARD COLORS
surface mounted.
1P536 36" Post 37" (940 mm) Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
1P542 Gloss Gloss Gloss Gloss Matte Gloss Matte
42" Post 43" (1092 mm)
1P548 48" Post 49" (1244 mm) Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color
P5241 20'-1" Stock Length 241" (6.12 m)#

CRL Fascia Mount Post Kits for 100 Series Rails

• 2-3/8" (60.3 mm) Square Post Standard Kits Include:
• Use for Center and End Posts
• Designed to be Mounted to
Almost Any Substrate
CRL 100 Series Fascia Post Kits come complete with

a Post that has an additional 11" (279.4 mm) in length,
Fascia Bracket (FB1), Base Plate Screws (BPS112),
Stainless Steel Washers (WSHR1), Bolt Cover Buttons
(BTN1), and Post Cap (PC1). See page R719 for Lag
Bolts or Anchors for mounting to the substrate. Fascia
Post Kits are available in your choice of three heights and STANDARD COLORS
seven attractive colors. Custom heights and colors are
also available.
1FP36K 36" Fascia Post Kit 47" (1194 mm)
Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color
1FP42K 42" Fascia Post Kit 53" (1346 mm) match is critical, please contact Technical Sales for additional information.
1FP48K 48" Fascia Post Kit 59" (1498 mm)
Minimum order: 1 each. * Specify powder coat color when ordering. the ability to color match as well.
CRL Fascia Mount Posts

Only for 100 Series Rails
• 6005 Alloy Aluminum/T5 Temper Posts 2-3/8"
(60.3 mm)
CRL 100 Series Aluminum Fascia Posts have

an additional 11" (279.4 mm) in length to accommodate
fascia mount installations. They are available in your
2-3/8"
choice of three heights and seven attractive colors. (60.3 mm)
Custom heights and colors are also available. STANDARD COLORS
CAT. NO.* DESCRIPTION HEIGHT/LENGTH Gloss Gloss Gloss Gloss Matte Gloss Matte
1FP36 36" Fascia Post 47" (1194 mm) Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color
1FP42 42" Fascia Post 53" (1346 mm) match is critical, please contact Technical Sales for additional information.
1FP48 48" Fascia Post 59" (1498 mm) Additional Color Options - CRL has over 250 quick turn custom color options with

CRL 90 Degree Fascia Mount Standard Kits Include: new

Post Kits for 100 Series Rails
• Used for 90 Degree Outside Corner Conditions
• Designed to Be Mounted to Almost Any Substrate
• Seven Attractive Colors Available From Stock, With
Custom Powder Coat Colors Also Available
• 6005 Alloy Aluminum/T5 Temper
CRL 100 Series 90 Degree Fascia Mount Post Kits come
complete with a Post that has an additional 11" (279.4 mm) in
length, Fascia Bracket (FB9), Bottom Facia Plate Base Plate
Screws (BPS112), Stainless Steel Washers (WSHR1), Bolt
Cover Buttons (BTN1), and Post Cap (PC1). See page R719
for Lag Bolts or Anchors for mounting to the substrate. Fascia
Posts Kits are available in your choice of three heights and seven
attractive colors. Custom heights and colors are also available.
CAT. NO.* DESCRIPTION POST HEIGHT
1FP936K 36" (914 mm) Fascia Post Kit 47" (1194 mm)
CRL Fascia Mount Brackets

• Seven Standard Colors Available to Match All
CRL Aluminum Railings Using Our 2-3/8"
(60.3 mm) Square Aluminum Posts
Use the CRL Fascia Mount Bracket to attach Vertical Posts
to the face of any deck. Includes Fascia Bracket (FB9), Bottom
Fascia Plate, Base Plate Screws (BPS112), Stainless Steel
Washers (WSHR1), and Bolt Cover Buttons (BTN1). See page
R719 for Lag Bolts or Anchors for mounting to the substrate.
Not for use with our 4 x 4 Vertical Posts.
CAT. NO. COLOR

FB1W Sky White
FB10W Oyster White
FB1AGY Agate Gray
FB1BGY Beige Gray
FB1BL Matte Black
FB1BRZ Matte Bronze
FB1GRN Forest Green 2-3/8"
(60.3 mm)
Square
Post
6"
(152.4 mm)
4-3/8"
(111.1 mm)
6"
(152.4 mm)
3"
(76.2 mm)
2-3/4"
(69.9 mm) (2) #14 x 1-1/2"
(2) #12 x 3/4"
Bottom Plate Flat Head Flat Head
Phillips Phillips Screws
Screws (Included)
(Included)

STANDARD COLORS
CRL Post Caps for 100 Series Rails
• Cover Exposed Edges of 100 Series
Vertical Posts Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
• Seven Attractive Colors Available Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color
From Stock, With Custom Powder match is critical, please contact Technical Sales for additional information.
Additional Color Options - CRL has over 250 quick turn custom color options
Coat Colors Also Available with the ability to color match as well.
CAT. NO. COLOR

PC1W Sky White
CRL 100 Series Aluminum Post Caps are
PC10W Oyster White
designed to fit our 100 Series Vertical Posts. Agate Gray
PC1AGY
They protect the exposed top edge from weather PC1BGY Beige Gray
and debris, and enhance the appearance of the PC1BL Matte Black
Post. Easily installs with CRL 95C Silicone (see PC1BRZ Matte Bronze
page R721). PC1GRN Forest Green
CRL Low Profile Post

Caps for 100 Series Rails
• Low Profile Pyramid Design
new
CAT. NO. COLOR
Coat Colors Also Available PC2W Sky White
CRL 100 Series Aluminum Low Profile Post PC20W Oyster White
Caps are designed to fit our standard 100 Series PC2AGY Agate Gray
2-3/8" (60.3 mm) square Posts. They protect the PC2BGY Beige Gray
PC2BL Matte Black
exposed top edge from weather and debris, and
PC2BRZ Matte Bronze
enhance the appearance of the Post. Easily
PC2GRN Forest Green
installs with CRL 95C Silicone (see page R721). Minimum order: 1 each.
CRL 135 Degree Post • Seven Attractive Colors Available

Caps for 100 Series Rails From Stock, With Custom Powder
Coat Colors Also Available CAT. NO. COLOR
PC45W Sky White
CRL 135 Degree Aluminum Post Caps are PC450W Oyster White
PC45AGY Agate Gray
designed to fit our 100 Series 135 Degree Vertical
PC45BGY Beige Gray
Posts. They protect the exposed top edge from
PC45BL Matte Black
weather and debris, and enhance the appearance
PC45BRZ Matte Bronze
of the Post. Easily installs with CRL 95C Silicone
PC45GRN Forest Green
(see page R721). Minimum order: 1 each.
CRL ARS Stanchions

• Designed for All Series of CRL Aluminum
new
Railings Using Our 2-3/8" (60.3 mm)
Square Aluminum Posts
2-3/8"
• Stainless Steel (60.3 mm) 5" x 5"
Use these 1-1/2" X 2" (38.1 X 50.8 mm) Square (127 x 127 mm)
Base Plate 3/8"
Stainless Steel Stanchions to core or surface Post
(9.5 mm)
mount your Aluminum Railing System. Wet set Thick
Core Stanchions in 8000 psi or greater cement
(see page R721 for Expanding Cement).
Surface Mount Stanchions are welded to a
steelbase plate, and then powder coated to
match our ARS Posts and Bottom Rails. One
each Moisture Barrier Gasket Cat. No. BPG1BL
is included with each Surface Mount Stanchion. Core Mount
Steel Stanchion Surface Mount Moisture
CAT. NO. DESCRIPTION STANCHION HEIGHT 4" (101.6 mm) Stanchion Barrier
PST5 Core Mount 10" (254 mm) Embedment in Gasket
*PST5BP Surface Mount 10" (254 mm) Concrete
Minimum order: 1 each. *Specify powder coat color when ordering. CAT. NO. PST5 CAT. NO. PST5BP

CRL Base Plate Cover new

• Designed for Use With Our Standard 2-3/8"
(60.3 mm) Square Aluminum Posts and 5"
(127 mm) Square Base Plates
• For Surface or Core Mounted Installations
CRL’s Aluminum Base Plate Cover was designed for those
applications that require the 5" (127 mm) Standard Square
Base Plate to be concealed. Aluminum Base Plate Covers are
installed with CRL 95C Silicone (see page R721), and offered
in seven standard colors with the ability to custom powder coat.
2-3/8" (60.3 mm)
Square Standard Post
Base Plate Cover
CAT. NO. COLOR NOTE: Base Plate
Covers are designed for 5" x 5" (127 x 127 mm)
CVR5W Sky White use only with Standard 1-1/8" 3/8" (9.5 mm) Thick
CVR50W Oyster White 5" (127 mm) Square (28.6 mm) Base Plate
CVR5AGY Agate Gray Base Plates, not Offset
Moisture Barrier
CVR5BGY Beige Gray Base Plates.
Gasket
CVR5BL Matte Black
CVR5BRZ Matte Bronze 5-1/4"
CVR5GRN Forest Green (133.4 mm)
CRL Standard 5" Square Base Plates

• Seven Standard Colors Available CRL Standard Square Aluminum Base Plates screw into Vertical Post raceways.
They are countersunk to accept four Cat. No. BPS112 Base Plate Screws, then
for 2-3/8" (60.3 mm) Square attached to the substrate with our Concrete Anchors or Lag Bolts (see page R719).
Aluminum Posts Use Stainless Steel Washers (WSHR1) and Color Match Bolt Cover Buttons (BTN1) to
add a finished look. The BP05 Offset Base Plate design allows Vertical Posts to attach
• 6005 Alloy Aluminum/T5 Temper to one side of the Base Plate. One each Moisture Barrier Gasket Cat. No. BPG1BL is
included with each Plate.
BP5 Square Base Plate BP05 Offset Base Plate

Holes for 3/8" Holes for 3/8"
Anchoring (9.5 mm) Anchoring (9.5 mm)
3-3/4" 3-3/4" Posts
(95.2 mm) Posts Thick (95.2 mm) Thick
5/8" 5/8"
(15.9 mm) (15.9 mm)
3-3/4" 3/8" (9.5 mm)

3-3/4" 5" 3/8" (9.5 mm) 5" Dia. Anchoring
(95.2 mm) (127 mm) (95.2 mm) (127 mm)
Dia. Anchoring Holes
Holes
5/8" 5/8"
(15.9 mm) 5" (15.9 mm) 5"
(127 mm) (127 mm)
CAT. NO. COLOR CAT. NO. COLOR

BP5W Sky White BP05W Sky White
BP50W Oyster White BP050W Oyster White
BP5AGY Agate Gray BP05AGY Agate Gray
BP5BGY Beige Gray BP05BGY Beige Gray
BP5BL Matte Black BP05BL Matte Black
BP5BRZ Matte Bronze BP05BRZ Matte Bronze
BP5GRN Forest Green BP05GRN Forest Green
Minimum order: 1 each. See page R686 for color chart. Minimum order: 1 each. See page R686 for color chart.

CRL Pickets for 100 Series Rails

• Four Standard Picket Lengths
• 5/8" (15.9 mm) Square Profile
Also Available
5/8"
(15.9 mm)
CRL 100 Series Pickets are
available in four stock lengths,
with custom lengths also available.
The Pickets can easily be cut to 5/8"
their required length in the field. (15.9 mm)
STANDARD COLORS
CAT. NO.* HEIGHT/LENGTH

1PKT36 36" (914 mm)
1PKT42 42" (1066 mm) Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
1PKT48 Gloss Gloss Gloss Gloss Matte Gloss Matte
48" (1219 mm)
1PKT241 241" (6.12 m)# Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color
# Must ship common carrier. Additional Color Options - CRL has over 250 quick turn custom color options with
the ability to color match as well.
CRL Picket Spacers for 100 Series Rails CRL Picket Vinyl for 100 Series Rails
3-7/8"
(98.4 mm)
• Seven Attractive Colors • Clear Vinyl that is Concealed

1-1/8"
Available From Stock, (28.6 mm) in Top or Bottom Rails
With Custom Powder Coat
Colors Also Available 1/4" • Design to Eliminate Noise That 7/8"
(6.3 mm) Other Railing Systems Produce (22.2 mm)
• Snap On Installation
3/4"
• 6005 Alloy Aluminum/T5 Temper (19 mm)
Use CRL 100 Series Aluminum Picket Spacers with our 100 Series
Use CRL 100 Series Clear Picket Vinyl when installing the 100
Picket Railing. Designed to accommodate 5/8" (15.9 mm) Square
Series Picket Railing. Designed to accommodate 5/8" (15.9 mm)
Pickets. Easy to install, simply snap on the 3-7/8" (98.4 mm) long
Pickets. Easy to install, simply cut to desired length, then push in
pre-cut spacer or cut to desired length, then push in for a snap tight fit.
for a snap tight fit.
CAT. NO.* LENGTH
1PS 3-7/8" (98.4 mm) CAT. NO. COLOR STOCK LENGTH
1PS241 241" (6.12 m)# 1PV120 Clear 10' (3.05 m)#
Minimum order: 1 each. * Specify powder coat color when ordering. Minimum order: 1 each. # Stock lengths longer than 108" (2.74 m) must ship common carrier unless you specify
# Must ship common carrier. that we cut them for U.P.S. A Cutting Charge will apply.

CRL Top Rail for 100 Series Rails CRL Bottom Rail for 100 Series Rails
• Designed to Accommodate 5/8" (15.9 mm) Pickets or • Designed to Accommodate 1/4" to 1/2" (6 to 12 mm)*
1/4" to 1/2" (6 to 12 mm)* Tempered Glass Glazing or 5/8" (15.9 mm) Square Pickets
• 100 Series Rails Meets Stairway Code Requirements • Sleek Tapered Design
• Seven Attractive Colors Available From Stock, • Seven Attractive Colors Available From Stock,
With Custom Powder Coat Colors Also Available With Custom Powder Coat Colors Also Available
2" 3/4"
(50.8 mm) 1" (25.4 mm) (19 mm)
Pocket Depth
1-3/4"
(44.4 mm) 2-1/2" 1-7/8"
(63.5 mm) (47.6 mm)
7/8"
3/4" (19 mm) (22.2 mm)
1-3/4"
* 1/2" (12 mm) Glass (44.4 mm) * 1/2" (12 mm) Glass
3/4"
(19 mm) only if wet glazed. only if wet glazed.
Our 100 Series CAT. NO. COLOR CRL 100 Series Aluminum CAT. NO. COLOR
Aluminum Top Rails are 1TR241W Sky White Bottom Rail was designed 1BR241W Sky White
sold in 20'-1" (6.12 m) 1TR2410W Oyster White to accommodate glass or 1BR2410W Oyster White
stock lengths. Powder 1TR241AGY Agate Gray pickets by simply changing 1BR241AGY Agate Gray
coated rails come in your 1TR241BGY Beige Gray the rigid vinyl. This Bottom 1BR241BGY Beige Gray
choice of seven standard 1TR241BL Matte Black Rail comes in 20'-1" (6.12 m) 1BR241BL Matte Black
CRL colors. Custom 1TR241BRZ Matte Bronze lengths made from powder 1BR241BRZ Matte Bronze
colors are also available. 1TR241GRN Forest Green coated extruded aluminum. 1BR241GRN Forest Green
See page R690 for Rail
Minimum order: 1 each. See page R688 for color chart. See page R690 for Rail Minimum order: 1 each. See page R688 for color chart.
Must ship common carrier. Connecting Blocks. Must ship common carrier.
Connecting Blocks.
CRL Glazing Vinyl • Rigid Glazing Vinyl is Designed to • Two Sizes for Use With 1/4" or 3/8"
Snap in Before the Glass is Installed (6 or 10 mm) Thick Tempered Glass
for 100 Series Rails
100 Series Top Rigid Vinyl 100 Series Bottom Rigid Vinyl
3/4"
(19 mm)
1/2"
3/4" (12.7 mm)
(19 mm) Aluminum
Block
2" 9/16"
(50.8 mm) (14.3 mm)
1-1/16" 3/4"
(27 mm) (19 mm)
CRL 100 Series Bottom Rigid Vinyl comes in two sizes to hold
1/4" (6 mm) or 3/8" (10 mm) glass. When installing Rigid Vinyl,
CRL 100 Series Top Rigid Vinyl is available in two sizes to hold insert Aluminum Blocks evenly spaced into channel, then snap
1/4" (6 mm) or 3/8" (10 mm) glass. When installing Rigid Vinyl, vinyl into place before you install the glass. Stock lengths of vinyl
snap it into place before installing the glass. Stock lengths of are 12 feet (3.66 m).
vinyl are 12 feet (3.66 m).
CAT. NO. DESCRIPTION 14BV Bottom Vinyl for 1/4" (6 mm) Thick Glass #
14TV Top Vinyl for 1/4" (6 mm) Thick Glass # 38BV Bottom Vinyl for 3/8" (10 mm) Thick Glass #
38TV Top Vinyl for 3/8" (10 mm) Thick Glass # 1ASB1 Pack of 10 Aluminum Blocks ▲
Minimum order: 1 each. A Packing Charge will be added to orders of fewer than five Minimum order: 1 each. A Packing Charge will be added to orders of fewer than five
combined lengths. # Stock lengths longer than 108" (2.74 m) must ship common carrier unless you specify combined lengths. # Stock lengths longer than 108" (2.74 m) must ship common carrier unless you specify
that we cut them for U.P.S. A Cutting Charge will apply. that we cut them for U.P.S. A Cutting Charge will apply. ▲ Minimum order is 10 each.

CRL Rail Connecting CRL Intermediate

Blocks for 100 Post Fitting
Series Rails • For Use Only
With Our 100
• Designed for
Series Railings
Installing 100 Series
Top and Bottom • Seven Attractive Colors
Rails to Post Available From Stock,
With Custom Powder Top of
Coat Colors Also Post
RCBS Available
See below for Screws
screws. The CRL Aluminum Intermediate Post Fitting was designed to
fit under the 100 Series Top Rail. This Post Fitting allows the 100
Series Top Rail to flow uninterrupted from top to bottom of stairs.
It is pressure fitted into top of post and secured with 95C Silicone.
Connecting
3/4" For attaching the Top Rail to the Intermediate Post Fitting use CRL
(19 mm) Blocks
Cat. No. TEK1 Screws.
CAT. NO. COLOR
1PFW Sky White
1-1/2" 1PF0W Oyster White
(38.1 mm) 1PFAGY Agate Gray
1PFBGY Beige Gray
1PFBL Matte Black
Use CRL Rail Connecting Blocks to connect Top and Bottom 1PFBRZ Matte Bronze
Rails to vertical posts. Screw Blocks into index grooves on post 1PFGRN Forest Green
using Cat. No. RCBS Rail Connecting Block Screws. Miter cut Minimum order: 1 each. See page R688 for color chart.
12" or 241" lengths when building angles for stairs and slopes.
All Connecting Blocks are extruded aluminum with a weather
resistant chromate finish. CRL Intermediate
CAT. NO.
RCB1
SIZE
1" (25.4 mm)
Bottom Support
RCB112 12" (304.8 mm) • For Use With
RCB1241 241" (6.12 m) # All Series of Our
Minimum order: 1 each. * Specify powder coat color when ordering. # Must ship common carrier.
Aluminum Railings
• Seven Attractive
CRL Stainless Steel Self Colors Available From
Drilling Railing Screws Stock, With Custom
Powder Coat Colors
Also Available
Bottom Rail
CAT. NO. RCBS CAT. NO. TEK1 TEK1 Screw

#10 x 2" Intermediate
#8 x 3/4"
Rail Connecting Bottom Support
Rail Fastening
Block Screw Screw
The CRL Aluminum Intermediate Bottom Support was designed
Use CRL Self Drilling Screws when to fit underneath the Bottom Rail for additional strength. Connects
installing our 100, 200, 300, 350, and 400 to Bottom Rail with two Cat. No. TEK1 Tek Screws. Support is 12"
Series Railings. Screws are stainless (305 mm) in length.
steel and have special crosscuts which CAT. NO. 9502
allow them to drill into aluminum. Screws Square CAT. NO. COLOR
require Cat. No. 9502 1/8" (3 mm) size Insert Bit 1BSW Sky White
Square Insert Bit to install. 1BS0W Oyster White
1BSAGY Agate Gray
CAT. NO. DESCRIPTION SIZE
1BSBGY Beige Gray
RCBS ▲ Rail Connecting Block Screw # 10 x 2" (50.8 mm) 1BSBL Matte Black
TEK1 ▲ Rail Fastening Screw #8 x 3/4" (19 mm) 1BSBRZ Matte Bronze
9502 # Square Insert Bit for Screws 1/8" (3 mm) 1BSGRN Forest Green
▲ Minimum order: 50 each. Must be ordered in increments of 50. # Minimum order: 1 each. Minimum order: 1 each. See page R688 for color chart.

ARS 200 Series Aluminum Railing System With Glass and Pickets ARS 200 Series Aluminum Railing System With Surface Mount Posts and Glass
ARS 100 Series Aluminum Railing System With Surface Mount Posts and Glass
ARS 200 Series Aluminum Railing System With Surface Mount Posts and Glass ARS 200 Series Aluminum Railing System With Fascia Mount Posts and Pickets

ARS 200 Series Aluminum Railing System With Surface Mount Posts and Glass ARS 300 Series Aluminum Railing System With Surface Mount Posts and Glass
ARS 200 Series Aluminum Railing System With Surface Mount Posts and 1/8" Cables ARS 200 Series Aluminum Railing System With Surface Mount Posts and Glass

CRL 200, 300, 350, and 400 Series Railing Systems MANUFACTURED IN THE USA
BY C.R. LAURENCE
• Four Different Top Rail Profiles

• Interchangeable Component Parts
• Surface or Fascia Mount
Post Systems
• Seven Standard Colors Available
From Stock, With Custom Colors
Also Available
• Most Application Possibilities
• Available With Custom Gates
• A.D.A. Compliant Guard Rails 200 Series 300 Series
CRL's high quality, versatile commercial or residential

200, 300, 350, and 400 Series Aluminum Railing
Systems are manufactured from extruded aluminum
framing members all of which utilize tempered glass,
aluminum pickets, cast infills, and stainless steel cable
that is engineered to meet applicable building code
specifications. Regardless of style or color, every 200,
300, 350, and 400 Series Railing System provides the
convenience of having all interchangeable component
parts, superior color retention, impact resistance, and
weatherability in any environment.
350 Series 400 Series
ARS 200 Series Aluminum Railing System With Custom Textured Glass ARS 300 Series Aluminum Railing System With Pickets
ARS 350 Series Aluminum Railing System With Glass ARS 400 Series Aluminum Railing System With Glass

CRL 200 Series Railing System

Our 200 Series Railing System uses a continuous flat top rail, which helps achieve a modern look. While most companies in the industry
offer very typical top rails, the 200 Series maintains an extremely low profile while outperforming competitive systems for strength and
durability. At 1-7/8" (47.6 mm) it has the lowest profile of all the top rails.
This system can be used with glass, cable, picket, cast, or custom water jet/laser cut infills. The pickets in this system come in the form
of a Picket Panel (see page R711), which costs a little more than the traditional single snap-in picket system, but will save you time and
labor during installation.
NOTE: As good as the 200 Series is, you cannot use it for a stair application where railing is required. The top cap is too wide in cross section
to achieve the status of a hand rail. This being the case, you must use our 100 Series (see pages R680-R681) for the stair portion of the job.

200 Series Top Rail
• Standard Rail Heights are 36" (914 mm), 42" (1066 mm),
3-1/2"
and 48" (1219 mm). Custom Rail Heights Also Available (88.9 mm)
• 2-3/8" (60.3 mm) Square Aluminum Post

• Infill Panel Options: 1/4" or 3/8" (6 or 10 mm) Glass, 3/4"
1-1/4"
(19 mm) Square or Round Profile Aluminum Picket Panels, (31.7 mm)
1-7/8"
Stainless Steel Cable, or Decorative Cast Panels (47.6 mm)
• Custom Water Jet/Laser Cut Infills Also Available

• Also 1/2" (12 mm) Glass When Used With Wet Glaze Method 5/8"
(15.9 mm)
• Seven Standard Colors Available From Stock,
With Custom Colors Also Available
• Deck (Top) Mount or Fascia Mount Applications Available
Glass
• Can Be Fabricated With Custom Gates
• Exterior and Interior Applications Pickets
• A.D.A. Compliant Guard Rails
200 Series Top Rail

CAT. NO. 2TR241
Infill
Options
Glass Infill MANUFACTURED IN THE USA
BY C.R. LAURENCE
CAT. NO. 1FGLS An ISO9001:2000 Certified Company
Top Glazing Vinyl

CAT. NO.14TV
or 38TV
2-3/8" (60.3 mm)
Square Post
Bottom Glazing Vinyl

CAT. NO. 14BV
or 38BV
200 Series Bottom Rail
CAT. NO. BRGLS
Rail Connecting
Block Screws
CAT. NO. RCBS
Rail Connecting Block
CAT. NO. RCB2
5" Square Base Plate
CAT. NO. BP5
CAT. NO. BPG1BL


The 300 Series offers the largest profile of all our top rails. At 2-7/8" (73 mm) high the 300 Series offers a stylish and continuous large round
top rail, while maintaining the strength and durability of all of our Aluminum Railing Systems.
of a Picket Panel (see page R711),which cost a little more than the traditional single snap-in picket system, but will save you time and
NOTE: You cannot use the 300 Series for a stair application where railing is required. The top cap is too wide in cross section to achieve the
status as a hand rail. You must use our 100 Series (see pages R680-R681) for the stair portion of the job.
• 6005-T5 Aluminum Alloy 300 Series Top Rail

• Standard Rail Heights are 36" (914 mm), 42" (1066 mm), 3"
(76.2 mm)
and 48" (1219 mm). Custom Rail Heights Also Available
(19 mm) Square or Round Profile Aluminum Picket Panels, 2-7/8"
(73 mm)
Stainless Steel Cable, or Decorative Cast Panels
• Custom Water Jet/Laser Cut Infills Also Available
5/8"
• Also 1/2" (12 mm) Glass When Used With Wet Glaze Method (15.9 mm)
• Deck (Top) Mount or Fascia Mount Applications 2-5/8"

(66.7 mm)
Pickets
• Can Be Fabricated With Custom Gates Glass
300 Series Top Rail

CAT. NO. 3TR241
Infill
Options
Glass Infill
CAT. NO. 1FGLS MANUFACTURED IN THE USA
BY C.R. LAURENCE
Top Glazing Vinyl

CAT. NO. 14TV
or 38TV
2-3/8" (60.3 mm)
Square Post

CAT. NO.14BV
or 38BV
CAT. NO. BRGLS
Rail Connecting
Block Screws
CAT. NO. RCBS
CAT. NO. RCB2
CAT. NO. BP5
CAT. NO. BPG1BL


The 350 Series features a continuous oval top rail that gives a clean, modern look that shows off its luxurious and unique shape, while
maintaining the strength and durability of all of our Aluminum Railing Systems.
of a Picket Panel (see page R711), which cost a little more than the traditional single snap-in picket system, but will save you time and
NOTE: You cannot use the 350 Series for a stair application where railing is required. The top cap is too wide in cross section to achieve the
status as a hand rail. You must use our 100 Series (see pages R680-R681) for the stair portion of the job.

• Standard Rail Heights are 36" (914 mm), 42" (1066 mm), 350 Series Top Rail
and 48" (1219 mm). Custom Rail Heights Also Available 3-3/4"
(95.2 mm)
(19 mm) Square or Round Profile Aluminum Picket Panels,
Stainless Steel Cable, or Decorative Cast Panels 2"
• Custom Water Jet/Laser Cut Infills Also Available (50.8 mm)
• Also 1/2" (12 mm) Glass When Used With Wet Glaze Method
5/8" (15.9 mm)
• Deck (Top) Mount or Fascia Mount Applications
• Seven Standard Colors Available From Stock, Pickets
• Can Be Fabricated With Custom Gates Glass
350 Series Top Rail

CAT. NO. 35TR241
Infill
Options
Glass Infill
CAT. NO. 1FGLS MANUFACTURED IN THE USA
BY C.R. LAURENCE
Top Glazing Vinyl An ISO9001:2000 Certified Company
CAT. NO. 14TV or 38TV

2-3/8" (60.3 mm)
Square Post

CAT. NO.14BV or 38BV
CAT. NO. BRGLS
Rail Connecting
Block Screws
CAT. NO. RCBS
CAT. NO. RCB2
CAT. NO. BP5
CAT. NO. BPG1BL

CRL 400 Series Railing System new

The CRL 400 Series Railing System has the widest profile of all of our Top Rails. At 5" (127 mm) wide the 400 Series offers a heavy-duty
modern look while still outperforming competitive systems for strength and durability. This system can be used with glass, stainless steel cable,
picket, cast, or custom water jet/laser cut infills. The pickets in this system come in the form of a Picket Panel (see page R711) which costs a
little more than the traditional single snap-in picket systems, but will save you time and labor during installation. NOTE: As good as the 400
Series is, you cannot use it for a stair application unless you use a grab rail at stairway areas that require it.
• 6005-T5 Aluminum Alloy 400 Series Top Rail

• Standard Rail Heights are 36" (914 mm), 42" (1066 mm), 5"
and 48" (1219 mm). Custom Rail Heights Also Available (127 mm)

• Infill Panel Options: 1/4" or 3/8" (6 or 10 mm) Glass, 3/4" 1-3/4"
2-5/16"
(44.4 mm)
(19 mm) Square or Round Profile Aluminum Picket Panels, (58.8 mm)
Stainless Steel Cable, or Decorative Cast Panels

• Custom Water Jet/Laser Cut Infills Also Available 5/8"
(15.9 mm)
• Also 1/2" (12 mm) Glass When Used With Wet Glazed Method
With Custom Colors Also Available Glass
• Deck (Top) Mount or Fascia Mount Applications Available
• Core Mount Applications Also Available Pickets
• Can Be Fabricated With Custom Gates

400 Series Top Rail

CAT. NO. 4TR241 Infill
Options
Tek Screws
CAT. NO. TEK1 MANUFACTURED IN THE USA
BY C.R. LAURENCE
Glass Infill An ISO9001:2000 Certified Company
CAT. NO. 1FGLS

Top Glazing Vinyl
CAT. NO. 14TV
OR 38TV
2-3/8" (60.3 mm)
Square Post

CAT. NO. 14BV
OR 38BV
CAT. NO. BRGLS
Rail Connecting
Block Screws
CAT. NO. RCBS
CAT. NO. RCB2
CAT. NO. BP5
CAT. NO. BPG1BL

CRL Top Rails for 200, 300, 350, and 400 Series
• 20'-1" (6.12 m) Stock Lengths You Cut to Your Requirements MANUFACTURED IN THE USA
BY C.R. LAURENCE
STANDARD COLORS
Top Rails for the 200, 300, 350, and 400 Series Railing Systems are
sold in 20'-1" (6.12 m) stock lengths that you can cut to fit your exact
needs. Powder coated rails come in your choice of seven standard
colors, or you can select from over 250 Quick Turn colors. Rails require Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
Connecting Blocks to fasten to posts (see page R709).
Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is
NOTE: Series 200, 300, 350, and 400 Rails do not meet stairway critical, please contact Technical Sales for additional information.
code requirements. For stairways you must use our 100 Series Rails Additional Color Options - CRL has over 250 quick turn custom color options with
(see pages R680-R681). the ability to color match as well.
200 Series Top Rail 300 Series Top Rail

3"
(76.2 mm)
3-1/2"
(88.9 mm)
2-7/8"
(73 mm)
5/8"
1-1/4" (15.9 mm) 1-7/8"
(31.7 mm) (47.6 mm) 2-5/8"
(66.7 mm) 5/8"
(15.9 mm)
• Designed to CAT. NO. COLOR

• For Use With 3/4"
CAT. NO. COLOR
Accommodate 3/4" 2TR241W COLORSky White
(19 mm) Pickets 3TR241W Sky White
(19 mm) Pickets 2TR2410W Oyster White or 1/4" to 1/2" 3TR2410W Oyster White
or 1/4" to 1/2" 2TR241AGY Agate Gray (6 to 12 mm)* 3TR241AGY Agate Gray
2TR241BGY Beige Gray 3TR241BGY Beige Gray
(6 to 12 mm)* 2TR241BRZ Matte Bronze Tempered Glass 3TR241BRZ Matte Bronze
Tempered Glass 2TR241BL Matte Black 3TR241BL Matte Black
2TR241GRN Forest Green 3TR241GRN Forest Green
* 1/2" (12 mm) Glass * 1/2" (12 mm) Glass
only if wet glazed Minimum order: 1 each. Must ship common carrier. only if wet glazed Minimum order: 1 each. Must ship common carrier.
350 Series Top Rail 400 Series Top Rail new

3-3/4" 5"
(95.2 mm) (127 mm)
1-3/4" 5/8" 2-5/16"

5/8" 2" (44.4 mm) (15.9 mm) (58.8 mm)
(15.9 mm) (50.8 mm)
• Will Accept 3/4" • Can Be Used

(19 mm) Pickets With 3/4" 4TR241W
35TR241W Sky White Sky White
or 1/4" to 1/2" 35TR2410W Oyster White (19 mm) Pickets 4TR2410W Oyster White
(6 to 12 mm)* 35TR241AGY Agate Gray or 1/4" to 1/2" 4TR241AGY Agate Gray
35TR241BGY Beige Gray 4TR241BGY Beige Gray
Tempered Glass 35TR241BRZ Matte Bronze (6 to 12 mm)* 4TR241BRZ Matte Bronze
35TR241BL Matte Black Tempered Glass 4TR241BL Matte Black
* 1/2" (12 mm) Glass 35TR241GRN Forest Green * 1/2" (12 mm) Glass 4TR241GRN Forest Green
only if wet glazed Minimum order: 1 each. Must ship common carrier. only if wet glazed Minimum order: 1 each. Must ship common carrier.

CRL Top Rail Infills for 200, 300, 350, and 400 Series Rails
BY C.R. LAURENCE
• Easily Snap Into the Underside of the Top Rail An ISO9001:2000 Certified Company
CRL Glass and Picket Top Rail Infills are sold in 20'-1" (6.12 m)
• Seven Attractive Colors to Match Our Posts stock lengths that can be field cut to the required size. The Infill
snaps into the underside of the Top Rail.
Top Rail Infill for Glass Top Rail Infill for Pickets
Top Rail 1-1/8"

(28.6 mm) Top Rail 1/8"
3/4"
(19 mm) 3/4" (3.2 mm)
(19 mm)
2-1/2" 2-1/2"
(63.5 mm) (63.5 mm)

• Designed to 1FGLSW Sky White • For Use With 1FPKTW Sky White
Accommodate 1FGLS0W Oyster White 3/4" (19 mm) 1FPKT0W Oyster White
1FGLSAGY Agate Gray 1FPKTAGY Agate Gray
1/4" to 1/2" 1FGLSBGY Beige Gray
Square or 1FPKTBGY Beige Gray
(6 to 12 mm)* 1FGLSBRZ Matte Bronze Round Pickets 1FPKTBRZ Matte Bronze
Tempered Glass 1FGLSBL Matte Black 1FPKTBL Matte Black
1FGLSGRN Forest Green 1FPKTGRN Forest Green
* 1/2" (12 mm) Glass Minimum order: 1 each. See page R698 for color chart. See page R711 for Pickets Minimum order: 1 each. See page R698 for color chart.
only if wet glazed Must ship common carrier. Must ship common carrier.
CRL Glazing Vinyl • Rigid Glazing Vinyl is Designed to Snap

in Before the Glass is Installed
• Two Sizes for Use With 1/4" or 3/8"
(6 or 10 mm) Thick Tempered Glass
200, 300, 350, and 400 200, 300, 350, and 400
Series Top Rigid Vinyl Series Bottom Rigid Vinyl
3/4"
Top Rail
(19 mm)
1-1/16" 9/16"
(27 mm) (14.3 mm)
Bottom Rail
3/4"
(19 mm)
CRL 200, 300, 350, and 400 Series Top Rigid Vinyl is available CRL 200, 300, 350, and 400 Series Bottom Rigid Vinyl comes in
in two sizes to hold 1/4" or 3/8" (6 or 10 mm) glass. When installing two sizes to hold 1/4" or 3/8" (6 or 10 mm) glass. When installing
Rigid Vinyl, snap it into place before installing the glass. Stock Rigid Vinyl, snap it into place before you install the glass. Stock
lengths are 12 feet (3.66 meters). lengths are 12 feet (3.66 meters).
Minimum order: 1 each. # Must ship common carrier. Minimum order: 1 each. # Must ship common carrier.
All shapes can be combined for quantity pricing. A Packing Charge will be added to orders of fewer than 5 combined lengths.
Stock lengths longer than 108" (2.74 m) must ship common carrier, unless you specify we cut them for U.P.S. A Cutting Charge will apply.

CRL End Caps for These CRL 200 Series End Caps are designed to screw into
the raceways of the Top Rail. End Caps are contoured to match
200 Series Rails the shape of the 200 Series Top Rail, and are countersunk to
allow two Cat. No. ECS1 End Cap Screws to fit flush. End Cap
BY C.R. LAURENCE
• Countersunk for End Cap Screws Screws sold separately (see page R701). Metal thickness is
1/8" (3.2 mm).
Decorative End Caps Wall Mount End Caps

• Matches Contours of Top Rail • Designed for Wall Mounting the Top Rail
200 Series Wall Mounted

Top Rail End Cap
200 Series
Top Rail
2DECW Sky White 2WECW Sky White
2DEC0W Oyster White End 2WEC0W Oyster White
2DECAGY Agate Gray Cap 2WECAGY Agate Gray
2DECBGY Beige Gray 2WECBGY Beige Gray
2DECBL Matte Black Post 2WECBL Matte Black
2DECBRZ Matte Bronze 2WECBRZ Matte Bronze
2DECGRN Forest Green 2WECGRN Forest Green
Minimum order: 1 each. Minimum order: 1 each. Edge of
See page R698 for color chart. See page R698 for color chart. Glass
CRL End Caps for CRL 300 Series End Caps are designed to screw into the
raceways of the Top Rail. End Caps are contoured to match the
300 Series Rails shape of the 300 Series Top Rail, and are countersunk to allow
two Cat. No. ECS1 End Cap Screws to fit flush. End Cap
BY C.R. LAURENCE
Screws sold separately (see page R701). Metal thickness is

• Countersunk for End Cap Screws 1/8" (3.2 mm).

• Matches Contours of Top Rail • Designed for Wall Mounting the Top Rail
Top Rail End Cap
300 Series
Top Rail
End
Cap
Post
Edge of
Glass

3DEC0W Oyster White 3WEC0W Oyster White
3DECAGY Agate Gray 3WECAGY Agate Gray
3DECBL Matte Black 3WECBL Matte Black
See page R698 for color chart. See page R698 for color chart.

CRL End Caps for These CRL 350 Series End Caps are designed to screw
into the raceways of the Top Rail. Shape of Cap matches
350 Series Rails contours of the 350 Series Top Rail. Countersunk to allow
two Cat. No. ECS1 End Cap Screws to fit flush. End Cap
BY C.R. LAURENCE
• Countersunk for End Cap Screws Screws sold separately (see below). Metal thickness is
1/8" (3.2 mm).

• Matches Shape of Top Rail • Designed for Wall Mounting the Top Rail

Top Rail End Cap
350 Series
Top Rail
35DEC0W Oyster White End 35WEC0W Oyster White
35DECAGY Agate Gray Cap 35WECAGY Agate Gray
35DECBL Matte Black Post 35WECBL Matte Black
Minimum order: 1 each. See page R698 for Minimum order: 1 each. See page R698 for Edge of
color chart. color chart. Glass
CRL Decorative End Caps new CRL End Cap Screws

for 400 Series Rails • Specifically Designed to Screw Into the
Raceways of Our Top Rails
• Matches Shape of Top Rail BY C.R. LAURENCE
• Stainless Steel
These CRL 400 Series End Top Rail
End Cap
Caps are designed to screw
into the raceways of the Top
End Cap
Rail. Shape of Cap matches Screw
contours of the 400 Series Top
Rail. Countersunk to allow two
Post
Cat. No. ECS1 End Cap Screws
to fit flush. End Cap Screws
sold separately. Metal thickness
is 1/8" (3.2 mm).
400 Series
CAT. NO.* COLOR Top Rail
4DECW Sky White
4DEC0W Oyster White The CRL End Cap Screw is designed to screw into the interior
4DECAGY Agate Gray raceways of our Top Rails. Flat Head #12 x 3/4" (19 mm) screw
4DECBGY Beige Gray fits flush with CRL Decorative or Wall Mount End Caps. For use
End
4DECBL Matte Black Cap with all series of CRL Aluminum Railings.
4DECBRZ Matte Bronze
4DECGRN Forest Green CAT. NO. DESCRIPTION SIZE
Minimum order: 1 each. *For wall mount
Post ECS1 End Cap Screw #12 x 3/4" (19 mm)
applications use Cat. No. RCB4. See page Minimum order: 50 each. Must be ordered in increments of 50.
R698 for color chart.

CRL 200 Series 90 Degree STANDARD COLORS
Horizontal Corners
•
•
Ready to Install
Welded and Finished BY C.R. LAURENCE
new MANUFACTURED IN THE USA

Sky White
Gloss
Oyster White
Gloss
Agate Gray
Gloss
Beige Gray
Gloss
Bronze
Matte
Forest Green
Gloss
Black
Matte
critical, please contact Technical Sales for additional information.
• Matches Shape of Top Rail Additional Color Options - CRL has over 250 quick turn custom color options with
• Seven Standard Powder Coated Finishes
• Includes Aluminum Connector Splice Plates
• Custom Angle Corners Also Available
CRL 200 Series Horizontal Corners are fabricated,
finished, powder coated and individually packaged.
This interior slip-fit corner is design for 90 degree
corner conditions that allow for a hairline joint in the
straight sections of the railing without having to miter
cut angles in the field. Attach the Corners using CRL
Cat No. TEK1 Tek Screws (see page R709).
90°
CAT. NO. COLOR
2TRHW Sky White
2TRH0W Oyster White 3" 3"
2TRHAGY Agate Gray (76.2 mm) (76.2 mm)
2TRHBGY Beige Gray
2TRHBL Matte Black 6" 6"
2TRHBRZ Matte Bronze (152.4 mm) (152.4 mm)
2TRHGRN Forest Green
Minimum order: 1 each. All Railing Corners can be combined for
quantity pricing
Horizontal Corners
• Welded and Finished BY C.R. LAURENCE

Sky White
Gloss
Oyster White
Gloss
Agate Gray
Gloss
Beige Gray
Gloss
Bronze
Matte
Forest Green
Gloss
Black
Matte
90°
CAT. NO. COLOR
3TRHW Sky White
3TRH0W Oyster White
3TRHAGY Agate Gray
3" 3"
3TRHBGY Beige Gray (76.2 mm) (76.2 mm)
3TRHBL Matte Black
3TRHBRZ Matte Bronze
6" 6"
3TRHGRN Forest Green (152.4 mm) (152.4 mm)
quantity pricing

Horizontal Corners

Sky White
Gloss
Oyster White
Gloss
Agate Gray
Gloss
Beige Gray
Gloss
Bronze
Matte
Forest Green
Gloss
Black
Matte
90°
CAT. NO. COLOR
35TRHW Sky White
35TRH0W Oyster White
35TRHAGY Agate Gray 3" 3"
(76.2 mm) (76.2 mm)
35TRHBGY Beige Gray
35TRHBL Matte Black
35TRHBRZ Matte Bronze 6" 6"
quantity pricing
STANDARD COLORS
CRL 400 Series 90 Degree
Horizontal Corners

Gloss Gloss Gloss Gloss

Matte Gloss Matte
CRL 400 Series Horizontal Corners are fabricated, finished,
powder coated and individually packaged. This interior slip-fit
corner is design for 90 degree corner conditions that allow for a
hairline joint in the straight sections of the railing without having to
miter cut angles in the field. Attach the Corners using CRL Cat No.
TEK1 Tek Screws (see page R709).
90°
CAT. NO. COLOR
4TRHW Sky White
4TRH0W Oyster White
4TRHAGY Agate Gray
4TRHBGY Beige Gray 2-3/4" 2-3/4"
4TRHBL Matte Black (69.9 mm) (69.9 mm)
4TRHBRZ Matte Bronze 7" 7"
quantity pricing

Horizontal Corners
new
An ISO9001:2000 Certified Company critical, please contact Technical Sales for additional information.
This interior slip-fit corner is designed for 135 degree
cut angles in the field. Attach the Corners using
CRL Cat No. TEK1 Tek Screws (see page R709).
135°
CAT. NO. COLOR
2TRH3W Sky White
2TRH3AGY Agate Gray
2TRH3BGY Beige Gray 3" 3"
2TRH3BL Matte Black (76.2 mm) (76.2 mm)
6"
2TRH3BRZ Matte Bronze 6"
(152.4 mm)
2TRH3GRN Forest Green (152.4 mm)

quantity pricing
Horizontal Corners
new


This interior slip-fit corner is designed for 135 degree
CAT. NO. COLOR 135°
3TRH3W Sky White
3TRH3AGY Agate Gray
3TRH3BGY Beige Gray
3TRH3BL Matte Black 3" 3"
3TRH3BRZ Matte Bronze (76.2 mm) (76.2 mm)
6" 6"
3TRH3GRN Forest Green (152.4 mm) (152.4 mm)
quantity pricing

Horizontal Corners
new


finished, powder coated and individually packaged. This
interior slip-fit corner is designed for 135 degree corner
conditions that allow for a hairline joint in the straight
sections of the railing without having to miter cut angles
in the field. Attach the Corners using CRL Cat No.
TEK1 Tek Screws (see page R709).
135°
CAT. NO. COLOR
35TRH3W Sky White
35TRH3AGY Agate Gray
35TRH3BGY Beige Gray
35TRH3BL Matte Black
3" 3"
35TRH3BRZ Matte Bronze (76.2 mm)
35TRH3GRN Forest Green (76.2 mm)
6" 6"
(152.4 mm) (152.4 mm)
quantity pricing
Horizontal Corners
•
•
Ready to Install
Welded and Finished BY C.R. LAURENCE

Sky White
Gloss
Oyster White
Gloss
Agate Gray
Gloss
Beige Gray
Gloss
Bronze
Matte
Forest Green
Gloss
Black
Matte
finished, powder coated and individually packaged. This
interior slip-fit corner is designed for 135 degree corner
conditions that allow for a hairline joint in the straight
sections of the railing without having to miter cut angles 135°
in the field. Attach the Corners using CRL Cat No. TEK1
Tek Screws (see page R709).
CAT. NO. COLOR
4TRH3W Sky White
4TRH3AGY Agate Gray
4TRH3BGY Beige Gray
4TRH3BL Matte Black 3" 3"
4TRH3BRZ Matte Bronze (76.2 mm) (76.2 mm)
4TRH3GRN Forest Green 6" 6"
(152.4 mm) (152.4 mm)
quantity pricing

CRL Corner Brackets for 200, 300, and 400 Series Rails
135 Degree 90 Degree
5/8" 2"
(15.9 mm) (50.8 mm)
5/8"
(15.9 mm)
1-3/4"
(44.4 mm)
1-3/8"
2"
1/8" (34.9 mm)
(50.8 mm)
(3.2 mm)
Thick
1-3/4"
(44.4 mm)
1/8"
(3.2 mm)
Thick
The CRL 135 Degree Corner Bracket was designed to fit CRL 90 Degree Corner Brackets fit underneath our 200, 300,
underneath our 200, 300, and 400 Series Top Rails. Brackets are and 400 Series Top Rails. Brackets are held in place with four
held in place with four Cat. No. TEK1 Self-Tapping Tek Screws Cat. No. TEK1 Tek Screws (see page R709). Two Brackets are
(see page R709). Two Brackets are required to butt-join a required to butt-join a mitered Top Rail together, then are attached
mitered Top Rail together, then are attached to an ARS Vertical to an ARS Vertical Post. Aluminum Brackets are concealed under
Post. Aluminum Brackets are concealed under the Top Rail to the Top Rail to connect corners.
connect corners.
45CB 135 Degree Bracket 90CB 90 Degree Bracket
CRL Splice Plates for 200, 300, CRL Adjustable Fastening

and 400 Series Rails Plates for Top Rails
• Aluminum Splice Plates • Aluminum Plates
Fit Under Top Rail to Attach to Top of Vertical
Splice Top Rails Together Post Then to Top Rail
Over a Post • No Exposed Screws Design
2-11/16"
(68.3 mm)
#14
Screws
5/8"
(15.9 mm)
2-3/8" Right Left
(60.3 mm) Hand For Hand
4" Plates
(101.6 mm)
1/8" (3.2 mm) Thick
The CRL Adjustable Fastening Plate was designed to first

attach to the top of the ARS Vertical Posts, then underneath
the Top Rails of our 200, 300, 350, and 400 Series Railings.
Plates are held in place with Cat. No. CBS1 Pan Head Screws.
This CRL Splice Plate was designed to fit underneath our Two Left Hand Plates are required to butt-join straight Top Rails
200, 300, and 400 Series Top Rails. Plates are held in place with together. Use one of each Left Hand and Right Hand to butt-join
two Cat. No. TEK1 Self-Tapping Tek Screws (see page R709). Mitered Top Rails.
Two Plates are required at each splice joint. CAT. NO. DESCRIPTION
CB350L Left Hand Plate
CAT. NO. DESCRIPTION CB350R Right Hand Plate
TCP1 Splice Plate CBS1 #14 x 3/4" (19 mm) Screw
Minimum order: 1 each. Minimum order: 1 each. Can not be used with our 100 Series Railing.

CRL Horizontal Mid-Rail MANUFACTURED IN THE USA

new
for 200, 300, 350, and BY C.R. LAURENCE
400 Series Rails

1-3/4"
• Designed to Accommodate (44.5 mm)
1/4" to 1/2" (6 to 12 mm) Glass

or 3/4" (19 mm) Square Pickets 1-11/16"
• Seven Standard Colors, With (42.9 mm)
Custom Powder Coat Colors

Also Available
• Designed to Be Anchored Between
Posts Using RCB2 Mounting Blocks
CRL Horizontal Mid-Rail is designed to CRL Horizontal

Mid-Rail
accommodate Glass or Picket Infills. For glass
applications use MR1F Glass Snap-In Filler CAT. NO. COLOR
(see below). For Picket applications use our Sky White
CRL Horizontal MR1W
BRF241 Bottom Rail Filler (see page R708). Snap-In Infill MR10W Oyster White
Stock lengths measure 20'-1" (6.12 m). See MR1AGY Agate Gray
page R709 for Rail Connecting Blocks. See MR1BGY Beige Gray
page R708 for standard colors. MR1BL Matte Black
MR1BRZ Matte Bronze
MR1GRN Forest Green
Minimum order: 1 each. Must ship common carrier.
CRL Horizontal Snap-In MANUFACTURED IN THE USA

new
Infill for Glass
BY C.R. LAURENCE
• Designed to Accommodate
1/4" to 1/2" (6 to 12 mm) Glass
• Designed to Be Anchored Between
Posts Using RCB2 Mounting Blocks
• Seven Standard Colors, With
1-1/16"
Custom Powder Coat Colors (27 mm)
Also Available
• Snaps In From the Underside
of the Horizontal Mid-Rail 3/4"
(19 mm)
CRL Horizontal Snap-In Infill for Glass is CRL Horizontal

Mid-Rail
designed to accommodate 1/4" to 1/2" (6 to CAT. NO. COLOR
12 mm) glazing. The Glass Snap-In Infill is MR1FW Sky White
designed to snap into the underside of the MR1F0W Oyster White
CRL Horizontal
MR1 Horizontal Mid-Rail (see above). Stock Snap-In Infill MR1FAGY Agate Gray
lengths measure 20'-1" (6.12 m). See page MR1FBGY Beige Gray
R709 for Rail Connecting Blocks. See MR1FBL Matte Black
page R708 for standard colors. MR1FBRZ Matte Bronze
MR1FGRN Forest Green

CRL Bottom Glass Rail CRL Bottom Picket Rail

for 200, 300, 350, and MANUFACTURED IN THE USA
BY C.R. LAURENCE
for 200, 300, 350, and MANUFACTURED IN THE USA
BY C.R. LAURENCE
400 Series Rails 400 Series Rails

• Bottom Rail Designed to Accommodate 1/4" • Designed to Accommodate 3/4" (19 mm)
to 1/2" (6 to 12 mm) Tempered Glass Square or Round Pickets
• Seven Standard Colors • Optional Bottom Rail Filler Available
3/4"
• Seven Standard Colors
5/8" (15.9 mm) (19 mm) 3/4"
(19 mm)
Pocket Depth
1-3/4" 1-3/4"
(44.5 mm) (44.5 mm)
1-5/8" 1-3/4"
(41.3 mm) (44.5 mm)
CAT. NO. COLOR Our 200, 300, 350, and CAT. NO. COLOR The 200, 300, 350,
BRGLSW
400 Series Bottom Rail is Sky White and 400 Series Picket
Sky White BRPKTW
BRGLS0W Oyster White designed to accommodate BRPKT0W Oyster White Bottom Rail is designed to
BRGLSAGY Agate Gray 1/4" to 3/8" (6 to 10 mm) BRPKTAGY Agate Gray accommodate 3/4" (19 mm)
BRGLSBGY Beige Gray tempered glass with vinyl, BRPKTBGY Beige Gray Square or Round Pickets.
BRGLSBL Matte Black 1/2" (12 mm) glazing if wet BRPKTBL Matte Black Stock lengths measure
BRGLSBRZ Matte Bronze glazed. Stock lengths BRPKTBRZ Matte Bronze 20'-1" (6.12 m).
BRGLSGRN Forest Green measure 20'-1" (6.12 m). BRPKTGRN Forest Green
Minimum order: 1 each. Must ship common carrier. Minimum order: 1 each. Must ship common carrier.
STANDARD COLORS
CRL Standard Bottom Rail
Filler for 200, 300, 350, and
Sky White
Gloss
Oyster White
Gloss
Agate Gray
Gloss
Beige Gray
Gloss
Bronze
Matte
Forest Green
Gloss
Black
Matte
Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is critical,
400 Series Rails
please contact Technical Sales for additional information. • Snaps in to Conceal the Underside of
Bottom Rails and Create a Flush Look
• Works With Bottom Rail for Glass or
Bottom Rail for Pickets
• Seven Standard Colors BY C.R. LAURENCE
1-1/2"
(38.1 mm)
CAT. NO. COLOR CRL Standard Bottom

BRF241W Sky White Rail Filler is designed to
BRF2410W Oyster White finish off the underside of
BRF241AGY Agate Gray Bottom Rail to create a
BRF241BGY Beige Gray flush look. Stock lengths
BRF241BL Matte Black measure 20'-1" (6.12 m).
BRF241BRZ Matte Bronze
BRF241GRN Forest Green

CRL Rail Connecting Blocks for 200,

300, 350, and 400 Series Rails
• Designed for Use When Installing the
200, 300, 350 or 400 Series Bottom Rails MANUFACTURED IN THE USA
BY C.R. LAURENCE
• Three Standard Lengths Available

Use CRL Rail Connecting Blocks to connect Bottom
Rails to vertical posts. Screw Blocks into index grooves
on post using Cat. No. RCBS Rail Connecting Block
Screws. Miter cut the 12" or 241" lengths when building RCBS
Screw
angles and slopes. All Connecting Blocks are extruded
aluminum with a weather resistant chromate finish. 1"
(25.4 mm)
CAT. NO. LENGTH Connecting
RCB2 1" (25.4 mm) Block
RCB212 12" (305 mm)
RCB2241 241" (6.12 m)# 1-1/2"
Minimum order: 1 each. # Must ship common carrier. (38.1 mm)
CRL Rail Connecting CAT. NO.

RCBS CRL Tek Screws CAT. NO.
TEK1
Block Screws #8 x 3/4"
Rail Fastening
Screw
#10 x 2"
• For 200, 300, 350, and Rail Connecting • For 200, 300, 350, and
400 Series Railings Block Screw 400 Series Railings
• Self-Tapping • Self-Tapping
• Stainless Steel CAT. NO. 9502 Square Insert Bit • Stainless Steel CAT. NO. 9502 Square Insert Bit
Use CRL Rail Connecting Block Screws when installing 200, 300, Use CRL Self-Tapping Tek Screws with installation of 200, 300,
350, and 400 Series Rail Connecting Blocks. RCB Screws are 350, and 400 Series Railings. Tek Screws are stainless steel #8 x
stainless steel #10 x 2", and have special crosscuts which allow them 3/4", and have special crosscuts which allow them to tap their own
to tap their own threads in aluminum. Screws require Cat. No. 9502 threads in aluminum. Screws require Cat. No. 9502 1/8" (3 mm)
1/8" (3 mm) size Square Insert Bit to install. size Square Insert Bit to install.
CAT. NO. DESCRIPTION SIZE CAT. NO. DESCRIPTION SIZE

RCBS Rail Connecting Block Screw #10 x 2" (50.8 mm) TEK1 Rail Fastening Screw #8 x 3/4" (19 mm)
9502 Square Insert Bit for Screws 1/8" (3 mm) # 9502 Square Insert Bit for Screws 1/8" (3 mm) #
Minimum order: 50 each. Must be ordered in increments of 50. # Minimum order: 1 each. Minimum order: 50 each. Must be ordered in increments of 50. # Minimum order: 1 each.
CRL Intermediate Bottom Support

• For Use With All of Our Aluminum Railings
• Seven Standard Colors to Match
Our Bottom Rails
The CRL Intermediate Bottom Support was designed to fit
underneath the Bottom Rail for additional strength. Connects to
Bottom Rail with two Cat. No. TEK1 Self-Tapping Tek Screws.
Support is 12" (305 mm) in length.
CAT. NO. COLOR

1BSW Sky White
1BS0W Bottom Rail
Oyster White
1BSAGY Agate Gray
1BSBGY Beige Gray MANUFACTURED IN THE USA
BY C.R. LAURENCE
1BSBL Matte Black An ISO9001:2000 Certified Company
1BSBRZ Matte Bronze TEK1 Screw

1BSGRN Forest Green Intermediate
Minimum order: 1 each. Bottom Support

ARS 200 Series Aluminum Railing System With Glass and Pickets
ARS 200 Series Aluminum Railing System With Fascia Mount Posts and Pickets
ARS 200 Series Aluminum Railing System With Fascia Mount Posts and Pickets
ARS 200 Series Aluminum Railing System With Surface Mount Posts and Glass ARS 200 Series Aluminum Railing System With Fascia Mount Posts, 1-1/2"
Custom Hand Rail and 1/8" Cables

CRL Picket Panels for 200, 300, 350, and 400 Series Rails
• 3/4" (19 mm) Square Pickets in
Seven Standard Colors MANUFACTURED IN THE USA
BY C.R. LAURENCE
• Nine Standard Picket Panel Sizes

• Custom Picket Panels Also Available
CRL Picket Panels are available in a variety of lengths and widths.
Seven stock colors to choose from. Use CRL Picket Panels to save
time and cost. All Panels come with Top Infill, Bottom Rail, and Pickets
spaced 3-7/8" (98.4 mm) apart.
STANDARD COLORS
Colors shown are representative only, and may vary slightly from actual gloss, color, and texture.
If color match is critical, please contact Technical Sales for additional information. Picket Snap-In Infill
Width
CAT. NO.* FITS OPENING (W X H) ACTUAL SIZE (W X H) PICKETS
P4836 48" x 36" (1219 x 914 mm) 53-5/8" x 33-1/8" (1362 x 841 mm) 10
P6036 60" x 36" (1524 x 914 mm) 65-5/8" x 33-1/8" (1667 x 841 mm) 13
P7236 72" x 36" (1828 x 914 mm) 77-5/8" x 33-1/8" (1972 x 841 mm) 15 3/4"
P4842 48" x 42" (1219 x 1066 mm) 53-5/8" x 39-1/8" (1362 x 994 mm) 10 (19 mm)
Square Height
P6042 60" x 42" (1524 x 1066 mm) 65-5/8" x 39-1/8" (1667 x 994 mm) 13 Pickets
P7242 72" x 42" (1828 x 1066 mm) 77-5/8" x 39-1/8" (1972 x 994 mm) 15
P4848 48" x 48" (1219 x 1219 mm) 53-5/8" x 45-1/8" (1362 x 1146 mm) 10
P6048 60" x 48" (1524 x 1219 mm) 65-5/8" x 45-1/8" (1667 x 1146 mm) 13
P7248 72" x 48" (1828 x 1219 mm) 77-5/8" x 45-1/8" (1972 x 1146 mm) 15
Minimum order: 1 each. * Specify powder coat color when ordering. Must ship common carrier. Aluminum Bottom Rail
CRL Pickets for 200, 300, 350, and 400 Series Rails
• 20'-1" (6.12 m) Extrusions • Seven Standard Colors
You Cut to Required Lengths MANUFACTURED IN THE USA
BY C.R. LAURENCE • Easy to Install Design MANUFACTURED IN THE USA
BY C.R. LAURENCE
An ISO9001:2000 Certified Company An ISO9001:2000 Certified Company
Square Pickets Round Pickets

3/4" (19 mm) Square
Aluminum Picket
3/4" (19 mm) Diameter
Aluminum Picket
Screw Race
3/4"
(19 mm)
Screw Race
3/4"
.120" Wall Thickness (19 mm)
3/4" CAT. NO. PKTS2 .120" Wall Thickness

(19 mm)
CAT. NO. PKTS2
Picket Screw Picket Screw
CAT. NO. COLOR Use CRL 200, 300, 350, CAT. NO. COLOR Use CRL 200, 300, 350, and
and 400 Series Square Picket 400 Series Round Picket
PKTS241W Sky White PKTR241W Sky White
Oyster White Extrusions with Top Infills and Extrusions with Top Infills and
PKTS2410W PKTR2410W Oyster White
PKTS241AGY Agate Gray Bottom Rails. The 3/4" (19 mm) PKTR241AGY
Bottom Rails. The 3/4" (19 mm)
Agate Gray
PKTS241BGY Beige Gray Picket Extrusion attaches to Top PKTR241BGY Beige Gray Picket Extrusion attaches to Top
PKTS241BL Matte Black Infills and Bottom Rails with a PKTR241BL Matte Black Infills and Bottom Rails with a
PKTS241BRZ Matte Bronze Cat. No. PKTS2 Stainless Steel PKTR241BRZ Matte Bronze Cat. No. PKTS2 Stainless Steel
PKTS241GRN Forest Green Phillips Pan Head Picket Screw. PKTR241GRN Forest Green Phillips Pan Head Picket Screw.
See above for color chart. Must ship common carrier. See above for color chart. Must ship common carrier.

CRL Standard Cast Infills

BY C.R. LAURENCE
• Made From Solid Cast Aluminum

• Combine With Pickets to Create a Unique
Appearance for Your Railing System
• Designed for 36" and 42" (914 and 1067 mm)
Tall Railings
CRL Aluminum Cast Infill Panels easily install into all ARS Series
Aluminum Railing Systems and provide an attractive, maintenance-free
design that will enhance any residential or commercial application.
15-3/8"
(390.5 mm)
Diamond Pattern Cast Infills 10"
(254 mm)
CRL Diamond Pattern Cast Infill Panels

are designed to work with all series of CRL
Aluminum Railing Systems. Infills can
create a unique architectural accent to
your railing project.
37-7/8"
(962 mm)
CAT. NO. COLOR

C1DP42W Sky White
C1DP420W Oyster White
C1DP42AGY Agate Gray
C1DP42BGY Beige Gray
C1DP42BL Matte Black
C1DP42BRZ Matte Bronze
3/4" (19 mm)
C1DP42GRN Forest Green Square
Minimum order: 1 each. See page R711 for color chart.
Diamond Pattern
Chevron Pattern Cast Infills 14-5/8"

(371.5 mm)
CRL Chevron Pattern Cast Infill Panels 45 Degree

are designed to work with all series of CRL Typical
Aluminum Railing Systems. Infills give a
unique architectural appearance to your
railing. 41-3/8"
(1050.9 mm)
CAT. NO. COLOR

C1CP42W Sky White
C1CP420W Oyster White
C1CP42AGY Agate Gray
C1CP42BGY Beige Gray
C1CP42BL Matte Black
C1CP42BRZ Matte Bronze
C1CP42GRN Forest Green 3/4" (19 mm)
Minimum order: 1 each. See page R711 for color chart. Square
Chevron Pattern

CRL Custom Water Jet and

Laser Cut Infill Panels
• Available in 1/4" and 3/8" (6 and 9.5 mm)
Aluminum Thickness
• Custom Finishes Also Available
• Welded and Fabricated as a Railing Infill
Panel or Can be Connected With Z-Series
Clamps (See Pages R631-R635)
CRL Water Jet and Laser Cut Infill Panels are designed
to be welded or connected with Z-Series Clamps into
CRL's Aluminum Railing Systems as a decorative infill
option. Each Water Jet or Laser Cut Panel is fabricated
to your exact specifications and innovative designs at our
Los Angeles manufacturing facility. CRL's Technical Sales
Representatives are eager to assist you and create a CAT. NO. DESCRIPTION
functional custom made Infill Panel that will meet the ARSLSR1 Custom Water Jet/Laser Cut Aluminum Infill Panel
needs of even the most discriminating customer, while Minimum order: 1 each. See page R711 for color chart.
assuring long-term structural integrity.
Designs Are Limitless new MANUFACTURED IN THE USA

BY C.R. LAURENCE
• Let CRL Create Your Next Custom Infill Panel

or Send Us Your Design to Work From
CRL's TRUMATIC L3030 CO2 Laser Cutting System

ARS Stainless Steel Cable Infills

• Stainless Cable Infills are the
Perfect Choice for Stairways and
Decks When View is Important
CRL 1/8" Stainless Steel Cable

• For Use With All CRL CRL 1/8" Diameter 1 x 19
Construction Stainless Steel Cable
Aluminum Railing Systems is designed with 19 separate wires
1/8" twisted into a single strand
• 1 x 19 Type 316 Stainless (3.2 mm)
Diameter
Steel Construction Cable See page R822 for
Cable Installation Tools
• 1/8" (3.2 mm) Diameter
• Uncoated and Low Maintenance
CRL Stainless Steel Cable is an infill option for any of our railing
systems. Recommended spacing between cables is 3" (76.2 mm)
center-to-center. The 1 x 19 construction Cable is engineered to hold 1/8" (3.2 MM) STAINLESS STEEL CABLE
static loads without stretching, and is relatively stiff. Order Cable in CAT. NO. ROLL LENGTH
rolls, pre-cut kits with hardware, or we can custom cut it to your CBL18 250' (76.2 m)
required length (see below). Minimum order: 1 roll.
CRL 1/8" Pre-Cut Stainless new Swaging Stud

Factory Installed Push Lock
Steel Cable Kits
• Available in Four Pre-Cut Sizes
• Factory Installed Swaging Stud
Tension
CRL Pre-Cut Stainless Steel Cable Kits are offered in four standard Receiver
lengths to make the install go easy. Included with each kit; one pre-cut Cable
1/8" (3.2 mm) diameter 1 x 19 Type 316 Stainless Steel Cable, one Cat.
No. SWGST1 Swaging Stud factory installed on Cable, one Cat. No.
TENRR1 Tensioning Receiver, and one Cat. No. PL4SS Push Lock.
Recommended maximum spacing between cables is 3" (76.2 mm)
center-to-center. The 1 x 19 construction Cable is engineered to hold
static loads without stretching, and is relatively stiff. The maximum
cable run is 50' (15.2 m) and post spacing is not to exceed 42" (1.06 m)
on center.
1/8" (3.2 MM) STAINLESS STEEL CABLE KITS
PL4SS Push Lock
TENRR1 Post 1/8" Dia. Cable for 1/8" Dia. Cable CAT. NO. LENGTH
Receiver Post CBL188K 8' (2.4 m)
CBL1818K 18' (5.5 m)
CBL1836K 36' (10.9 m)
CBL1851K 51' (15.5 m)
CBL18KC *Custom Length
Minimum order: 1 each. * Must specify custom length at time of order.

CRL Tensioning Receiver Post

2-3/8" 7/16"
(60.3 mm) (11.1 mm) Receiver
• Allows 1/8" (3.2 mm) Cable
to Be Adjusted Between Spans
• Mounts to Aluminum, Wood Swaged
Threaded
or Stainless Steel Posts 9/16"
(14.3 mm)
Stud
• Type 316 Stainless Steel

The Receiver can be used in a
horizontal position on stair end posts
that have a pitch up to 35 degrees.
The CRL Tension Receiver is a tensioning device Washer Post This eliminates the need to bore hardware
hidden inside the end post, with only the head of the holes at an angle on stair runs.
Receiver
Receiver exposed on the outside of the post. It allows Swaged Threaded Stud
the 1/8" (3.2 mm) Stainless Steel Cable to be adjusted
between spans. The inside is female threaded to accept Allen Head
Stainless CAT. NO. FITS CABLE DIAMETER
the male-threaded Cat. No. SWGST1 Swaging Stud
Fitting that is attached to the cable. Requires 3/16" hex Counterbored Steel Cable TENRR1 1/8" (3.2 mm)
Hole on Post Only Minimum order: 1 each.
wrench to fasten.
CRL Swaging Stud Fitting

• Secures Our 1 x 19 Type 316
1/8" (3.2 mm) Stainless Steel Cable
• Designed for Aluminum, Wood 1-1/8"
(28.6 mm)
or Stainless Steel Post Applications
Swaged on the end of the Stainless Steel Cable, this part is used with the Threads into Cat. No. TENRR1
Cat. No. TENRR1 Tensioning Receiver. When installed, it is completely hidden Tensioning Receiver
inside the Fitting so you will never see any unattractive swaging marks. The
threaded surface is coated with a baked-on, molybdenum based dry film lubricant CAT. NO. FITS CABLE DIAMETER
to prevent the threads from galling when tensioned and in extreme environments. SWGST1 1/8" (3.2 mm)
Only for use with 1/8" (3.2 mm) diameter Cable. Minimum order: 1 each.
CRL Push Lock Fitting 1-9/16"

(39.7 mm) 7/16"
(11.1 mm) new
The CRL Push Lock Fitting is designed to be used on 1/8"
(3.2 mm) Cable. When used with an end post 1-1/2" (38.1 mm) 17/32"
(13.5 mm)
or more in thickness, the Push Lock Fitting with a rounded head
is hidden inside the end post, with only the head exposed on the CAT. NO. FITS CABLE DIAMETER
outside of the post. A plastic washer is included and acts as a PL4SS 1/8" (3.2 mm)
scratch resistant barrier between the Push Lock Fitting and post.
CRL Ferrule Fitting 13/16"

(20.6 mm)
• For Use on the Fixed, Non-Tensioning 7/16"

9/16" (11.1 mm)
End of Our 1 x 19 Type 316 1/8" (3.2 mm) (14.3 mm)
Stainless Steel Construction Cable
• Mounts to Aluminum, Wood or
Post
Stainless Steel Posts
Stainless Swaged
When installed, the Ferrule Fitting is hidden inside the end Steel Radius
Cable Ferrule
post, with only the head exposed on the outside of the post.
After it's installed, it looks the same as the Tensioning Receiver. CAT. NO. FITS CABLE DIAMETER
Only for use with 1/8" (3.2 mm) diameter Cable. This Fitting Washer
FXFRL1 1/8" (3.2 mm)
must be installed using a Swager Tool (see page R822). Minimum order: 1 each.

CRL Surface Mount Post Kits for 200, 300, 350, and
400 Series Rails Standard Kits Include:
• 2-3/8" (60.3 mm) Square

• Use for 180 Degree, MANUFACTURED IN THE USA
BY C.R. LAURENCE
90 Degree or End Posts

• Complete With Base Plate,
Moisture Barrier Gasket,
Stainless Washers, Screws,
and Bolt Cover Buttons
CRL 200, 300, 350, and 400 Series Surface
Mount Post Kits come complete with Base Plate
(BP5), Moisture Barrier Gasket (BPG1BL), Base
Plate Screws (BPS112), Stainless Steel Washers
(WSHR1), and Color Match Bolt Cover Buttons
(BTN1). Standard Posts Kits are available in STANDARD COLORS
your choice of three heights and seven
attractive colors. Custom heights and colors
are also available.
P36K 36" Post Kit 36" (914 mm) Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is
P42K 42" Post Kit 42" (1066 mm)
P48K 48" Post Kit 48" (1219 mm) Additional Color Options - CRL has over 250 quick turn custom color options with
Minimum order 1 each. *Specify powder coat color when ordering.
CRL Posts Only for

200, 300, 350, and
400 Series Rails
• 2-3/8" (60.3 mm) Square
• Use for 180 Degree, 90 Degree
or End Posts
• 6005 Alloy Aluminum/T5 Temper 2-3/8"
(60.3 mm)
CRL 200, 300, 350, and 400 Series Aluminum
Posts are available in your choice of three
heights and seven attractive colors. You can
also cut custom posts from our 20'-1" (6.12 m) 2-3/8"
(60.3 mm)
stock length. Custom heights and colors are STANDARD COLORS
also available.

P36 36" Post 36" (914 mm) Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
P42 42" Post 42" (1066 mm) Gloss Gloss Gloss Gloss Matte Gloss Matte
P48 48" Post 48" (1219 mm) Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is
P241 20'-1" Stock Length 241" (6.12 m)#
Minimum order 1 each. * Specify powder coat color when ordering. Additional Color Options - CRL has over 250 quick turn custom color options with

CRL 135 Degree Surface Mount Post Kits for

200, 300, 350, and 400 Series Rails MANUFACTURED IN THE USA
BY C.R. LAURENCE
Standard Kits Include:

• Complete With Base Plate, Moisture
Barrier Gasket, Screws, Stainless
Washers, and Bolt Cover Buttons
• Designed to Be Installed Onto
Concrete, Wood, Steel, and
Other Substrates
• Seven Attractive Colors
CRL 135 Degree Post Kits Come complete with
Base Plate (BP5), Moisture Barrier Gasket (BPG1BL),
Base Plate Screws (BPS112), Stainless Steel
Washers (WSHR1), and Color Match Bolt Cover
Buttons (BTN1). Standard Post Kits are available in
STANDARD COLORS
colors. Custom heights and colors are also available.
P536K 36" 135 Degree Post Kit 36" (914 mm) Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is
P542K 42" 135 Degree Post Kit 42" (1066 mm) critical, please contact Technical Sales for additional information.
P548K 48" 135 Degree Post Kit 48" (1219 mm) Additional Color Options - CRL has over 250 quick turn custom color options
Minimum order 1 each. * Specify powder coat color when ordering. with the ability to color match as well.
CRL 135 Degree Posts Only

for 200, 300, 350, and 400
Series Rails
• Three Standard Post Heights Plus
a Stock Length You Can Cut
to the Needed Size
• Seven Attractive Colors 2-1/8"
(54 mm)
CRL 135 Degree Posts are available in your choice

of three heights and seven attractive colors. Custom
heights and colors are also available. You can also
order our 20'-1" (6.12 m) stock length to cut posts of 2-3/8" 2-3/8"
any height required. These posts are designed to be (60.3 mm) (60.3 mm)
installed onto concrete, wood, steel, and other
substrates. Can be core mounted or surface mounted.
STANDARD COLORS

P536 36" 135 Degree Post 36" (914 mm) Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
P542 42" 135 Degree Post 42" (1066 mm) Gloss Gloss Gloss Gloss Matte Gloss Matte
P548 48" 135 Degree Post 48" (1219 mm) Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is
P5241 20'-1" Stock Length 241" (6.12 m)#
Minimum order 1 each. * Specify powder coat color when ordering. Additional Color Options - CRL has over 250 quick turn custom color options with

CRL Standard 5" CRL Standard Square Base Plates screw into Vertical Post raceways.
They are countersunk to accept four Cat. No. BPS112 Base Plate Screws,
Square Base Plates MANUFACTURED IN THE USA
BY C.R. LAURENCE
An ISO9001:2000 Certified Company then attached to the substrate with our Concrete Anchors or Lag Bolts (see
page R719). Use Stainless Steel Washers (WSHR1) and Color Match Bolt
• Seven Standard Colors Available Cover Buttons (BTN1) to add a finished look. The BP05 Offset Base Plate
for Standard and 45 Degree Post design allows vertical posts to attach to one side of the Base Plate. One
each Moisture Barrier Gasket Cat. No. BPG1BL is included with each Base
• For Use With All Standard Railings Plate (see below).
Square Base Plate • For 2-3/8" (60.3 mm) Offset Base Plate • For 2-3/8" (60.3 mm)
Square Aluminum Posts Square Aluminum Posts
3-3/4" 3-3/4"
(95.2 mm) (95.2 mm)
5/8" 5/8"
(15.9 mm) Holes for 3/8" (15.9 mm) Holes for 3/8"
Anchoring (9.5 mm) Anchoring (9.5 mm)
Posts Thick Posts Thick
3-3/4" 5" 3-3/4" 5"
(95.2 mm) (127 mm) (95.2 mm) (127 mm) 3/8"
3/8" (9.5 mm) Dia.
(9.5 mm) Dia. Anchoring
5/8" Anchoring 5/8" Holes
5" Holes 5"
(15.9 mm) (15.9 mm) (127 mm)
(127 mm)

BP5W Sky White BP05W Sky White
BP50W Oyster White BP050W Oyster White
BP5AGY Agate Gray BP05AGY Agate Gray
BP5BGY Beige Gray BP05BGY Beige Gray
BP5BL Matte Black BP05BL Matte Black
BP5BRZ Matte Bronze BP05BRZ Matte Bronze
BP5GRN Forest Green BP05GRN Forest Green
CRL 6-1/2" Square Base Plates CRL Moisture Barrier Gaskets

• For Use With Our 4" x 4" Vertical Posts • Protects Metal Base Plates From
Moisture in Concrete
This Square Base Plate screws into our 4" x 4" (101.6 x 101.6 mm) • Three Sizes Available
new
Vertical Post raceways, and is countersunk to accept four Cat. No.
BPS112 Base Plate Screws. Attach to substrate with Concrete Anchors
• For Aluminum Railings and Windscreens
or Lag Bolts (see page R719). Use Stainless Steel Washers (WSHR1) • 1/8" (3.2 mm) Thick
and Color Match Bolt Cover Buttons (BTN1) to add a finished look.
One each Moisture Barrier Gasket Cat. No. BPG3BL is included with each
Base Plate.
3/4" Holes for 3/8"
(19 mm) Anchoring (9.5 mm)
Posts Thick
5"
(127 mm)
6-1/2" 3/8"
(165.1 mm) (9.5 mm) Dia.
3/4" Anchoring
(19 mm) Holes
6-1/2" CRL Moisture Barrier Gaskets protect metal Base Plates on
(165.1 mm)
Posts and Stanchions from moisture absorption through concrete,
brick, masonry, or stucco substrates. Moisture, over time will cause
CAT. NO. 0COLOR
metal to corrode, and with these Barrier Gaskets between the
BP6W Sky White
substrate and Base Plate the metal is protected.
BP60W Oyster White
BP6AGY Agate Gray
BP6BGY Beige Gray CAT. NO. SIZE
BP6BL Matte Black BPG1BL 5" x 5" (127 mm x 127 mm)
BP6BRZ Matte Bronze BPG2BL 6" x 6" (152 mm x 152 mm)
BP6GRN Forest Green BPG3BL 6-1/2" x 6-1/2" (165.1 mm x 165.1 mm)
Minimum order: 1 each. See page R717 for color chart. Minimum order: 1 each. All Sizes can be combined for quantity pricing.

CRL Base Plate Screws BP6 Post

Base
• For Use With All Plate
Square Base Plates BPS112
Screws
• Stainless Steel
CAT. NO. DESCRIPTION SIZE

BPS112 Base Plate Screw #14 x 1-1/2" (38.1 mm)
CRL Lag Bolts Use CRL Lag Bolts with CRL Stainless Steel Washers (WSHR1)
and Color Match Bolt Cover Buttons (BTN1) to create a finished look.
• Attach Vertical Posts to a Wooden Substrate All Lag Bolts are designed to attach to a wooden substrate. See next
page for Color Match Bolt Cover Buttons and Stainless Steel Washers.
• Stainless Steel
CRL 3/8" x 3-1/2" Lag Bolts CRL 3/8" x 6" Lag Bolts
CAT. NO. SIZE LENGTH QTY/BOX CAT. NO. SIZE LENGTH QTY/BOX
LB350 3/8" (9.5 mm) 3-1/2" (88.9 mm) 20 LB600 3/8" (9.5 mm) 6" (152.4 mm) 20
CRL Concrete Anchors CRL Concrete Anchors are ideal for attaching Vertical Post Kits
to substrate. Use with Cat. No. WSHR1 Stainless Steel Washers
and Color Match Bolt Cover Buttons (see next page) to create a
• To Attach Vertical Posts to Concrete Substrate finished look.
CRL Wedge-Bolt Anchors CRL Stainless Steel Anchors

• Heat Treated Carbon Steel 6"
4-3/16" 3-11/16"
NOTE: These anchors are not to be

CAT. NO. SIZE LENGTH QTY/BOX used for guard rail applications.
WBA38X4 3/8" (9.5 mm) 4" (101.6 mm) 50 CAT. NO. SIZE LENGTH QTY/BOX
WBA14X3 1/4" (6.3 mm) 3" (76.2 mm) 50 CA325 1/4" (6.3 mm) 3-1/4" (82.5 mm) 20

new
COLOR
CRL Color Match Bolt CRL Stainless Steel
Cover Buttons Button Washer
• Snap-On Fit • Sleek Design Allows
• Eight Standard Bolt Cover Buttons
Colors to Snap Over the
Stainless Steel Washer
CRL Color Match Bolt 1" (25.4 mm) diameter
Cover Buttons are designed Stainless Steel Washer
to cover up exposed Concrete with a 7/16" (11.1 mm)
Anchors and Lag Bolts on hole. Designed to accept
Vertical Post Base Plates. CRL Color Match Bolt
Plastic Buttons snap over Cover Buttons.
Cat. No. WSHR1 Stainless
Steel Washers to create a
finished look. Button Diameter:
1-3/16" (30.1 mm) Install
Button Height: Anchor
CAT. NO. COLOR 3/8" (9.5 mm) and
BTN1W Sky White Washer Snap Bolt
BTN10W Oyster White Button Through Cover Button
BTN1AGY Agate Gray Snaps Baseplate on Washer
BTN1BGY Beige Gray on
BTN1BL Matte Black Washer
BTN1BRZ Matte Bronze to
Conceal
BTN1GRN Forest Green Anchor
BTN1DS Dark Silver CAT. NO. DIAMETER HOLE THICKNESS
Minimum order: 50 each. Must be ordered
in increments of 50. See page R717 for color chart. WSHR1 1" (25.4 mm) 7/16" (11.1 mm) 1/8" (3.2 mm)
CRL ARS Stanchions new MANUFACTURED IN THE USA

BY C.R. LAURENCE
• Designed for All Series of CRL Aluminum Railings

Using Our 2-3/8" (60.3 mm) Square Aluminum Posts
• Stainless Steel
Use these 1-1/2" x 2" (38.1 x 50.8 mm) Stainless Steel Stanchions
to core or surface mount your Aluminum Railing System. Wet set Core
Stanchions in 8,000 psi or greater cement (see page R721 for Expanding
Cement). Surface Mount Stanchions are welded to a steel base plate
and then powder coated to match our ARS Posts and Bottom Rails.
One each Moisture Barrier Gasket Cat. No. BPG1BL is included with
each Surface Mount Stanchion.
5" x 5"
(127 x 127 mm)
2-3/8" 2-3/8" Base Plate 3/8"
(60.3 mm) (60.3 mm) (9.5 mm)
Square Square Thick
Post Post
Core Mount 10"
Steel Stanchion (254 mm) Surface
4" (101.6 mm) Mount Stanchion
Embedment in
Concrete
CAT. NO. DESCRIPTION STANCHION HEIGHT Moisture

Barrier Gasket
PST5 Core Mount 10" (254 mm)
*PST5BP Surface Mount 10" (254 mm) CAT. NO. PST5 CAT. NO. PST5BP
Minimum order: 1 each. * Specify powder coat color when ordering. See page R717 for color chart.

CRL Kwixset® and Rockite®

Expanding Cements
• Great for Setting Core Mount
Stanchions for Vertical Posts
• Expand as They Set
CRL Kwixset® and Rockite® are gray, hydraulic type cements

that expand as they set, and are specially formulated to produce
unexcelled strength and bonding qualities. When mixed with water For Exterior Applications For Interior Applications Only
they pour into place smoothly. Both set within 15 to 20 minutes,
and when fully cured develop compression strengths in excess of KWIXSET® ROCKITE®
8000 pounds per square inch. CAT. NO. WEIGHT CAT. NO. WEIGHT
Kwixset® is not affected by standing water, making it the right KWX25 25 Pounds (11.3 kg) R0CK01 1 Pound (.454 kg)
cement for exterior use, while the more economical Rockite® is KWX50 50 Pounds (22.7 kg) R0CK05 5 Pounds (2.27 kg)
great for any interior application. Use either product to set railings, Minimum order: 1 each. NOTE: Kwixset® can be used R0CK10 10 Pounds (4.54 kg)
brackets, and other fixtures because they will not shrink, crack
in temperatures as low as 40ºF (4ºC). R0CK50 50 Pounds (22.7 kg)
Minimum order: 1 each. NOTE: Rockite® can be used
or dry out. in temperatures as low as 25ºF (-4ºC).
CRL Usage and Mixing Proportion CEMENT

POUNDS VOLUME OZ. MILLILITERS
WATER
PINTS FLUID OZ. MILLILITERS
Chart for Expanding Cement 5 (2.27 kg) 67.6 2000 1-1/2 24 710
10 (4.54 kg) 135.2 4000 3 48 1420
and Water 15 (6.80 kg) 202.8 6000 4-1/2 72 2130
These mixing proportions are guidelines based on what we feel is the best way to mix and apply cement, and we make no
guarantee or warranty as to its performance. We suggest you make a sample batch for testing purposes to determine the
exact formula that is right for your application before beginning any job.
CRL 95C Silicone Building Sealant

• Excellent Primerless Adhesion to Most
Common Construction Substrates
• Excellent Adhesive for Setting
Windscreen Posts to Stanchions
• Long Tooling Time, All Temperature
Available In These Colors
Gunning, Plus Each Tube Has an
Innovative Screw-On Nozzle 10.3 Fl. Oz. (305 ml) Cartridges;
30 Cartridges Per Case;
1440 Cartridges Per Pallet
Black Dark Bronze Gray Limestone Precast
White
CRL 95C Silicone is a one part, low modulus, neutral cure formulation that cures to a durable and
flexible silicone rubber building joint seal. It can accommodate ±50 percent joint movement in properly
designed joints. Designed for sealing expansion and control joints in precast concrete panels and metal
curtain walls; non-structural glazing of glass, metal and plastic, as well as waterproofing applications, CAT. NO. COLOR
including perimeter sealing of doors and windows. 95CBL Black
CRL 95C forms a durable, flexible, watertight bond with most building materials in any combination 95CDBRZ Dark Bronze
95CGRY Gray
of glass, ceramics, plastics, stone, masonry, wood, steel, anodized and mill-finished aluminum, and
95CL Limestone
painted surfaces. CRL 95C can be applied at outdoor temperatures as low as -20°F (-29°C), provided Precast White
95CW
that surfaces are clean, dry, and frost-free, or on surfaces as high as 100°F (38°C). Cured sealant will
Minimum order: 1 each. Colors can be combined for quantity
perform at cold temperatures down to -40°F (-40°C) or at high temperatures up to 350°F (177°C). pricing. Also available in 2 or 4.5 gallon pails.

CRL Fascia Mount Post Kits

for 200, 300, 350, and 400 MANUFACTURED IN THE USA
BY C.R. LAURENCE
Series Rails Standard Kits Include:
• 2-3/8" (60.3 mm) Square

• Use for Center and End Posts
• Designed to Mount to Almost
Any Substrate
CRL 200, 300, 350, and 400 Series Fascia
Mount Post Kits come complete with a Post
that has an additional 10" (254 mm) in length,
Fascia Bracket (FB1), Base Plate Screws
(BPS112), Stainless Steel Washers (WSHR1),
and Bolt Cover Buttons (BTN1). Fascia Mount STANDARD COLORS
Post Kits are available in your choice of three
heights and seven attractive colors. Custom
heights and colors are also available.
FP36K 36" Fascia Post Kit 46" (1168 mm) Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is critical,
FP42K 42" Fascia Post Kit 52" (1320 mm) please contact Technical Sales for additional information.
FP48K 48" Fascia Post Kit 58" (1473 mm) Additional Color Options - CRL has over 250 quick turn custom color options with
Minimum order 1 each. * Specify powder coat color when ordering. the ability to color match as well.
CRL Fascia Mount Posts Only

for 200, 300, 350, and 400
Series Rails
• 2-3/8" (60.3 mm) Square
• Custom Colors Also Available
CRL 200, 300, 350, and 400 Series Fascia 2-3/8"
Posts have an additional 10" (254 mm) in length to (60.3 mm)
accommodate fascia mount installations. They are
available in your choice of three heights and seven
attractive colors. You can also cut custom posts
from our 20'-1" (6.12 m) stock length. Custom 2-3/8"
heights and colors are also available. STANDARD COLORS (60.3 mm)

FP36 36" Fascia Post 46" (1168 mm) Gloss Gloss Gloss Gloss Matte Gloss Matte
FP42 42" Fascia Post 52" (1320 mm) Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is critical,
FP48 48" Fascia Post 58" (1473 mm) please contact Technical Sales for additional information.
P241 20'-1" Stock Length 241" (6.12 m)#
Minimum order 1 each. * Specify powder coat color when ordering. the ability to color match as well.
# Must ship common carrier

CRL 90 Degree Fascia Mount new

Post Kits for 200, 300, 350, MANUFACTURED IN THE USA
BY C.R. LAURENCE
Standard Kits Incude:

and 400 Series Rails
• For 2-3/8" (60.3 mm) Square Posts
• Designed for Outside 90 Degree
Mounting Conditions to Almost
Any Substrate
• 6005 Alloy Aluminum T5 Temper
These CRL Fascia Mount Post Kits are designed
for outside 90 degree mounting conditions. Kits come
complete with a Post that has an additional 10" (254 mm)
in length, Fascia Bracket (FB2), Base Plate Screws
(BPS112), Stainless Steel Washers (WSHR1), and Bolt
Cover Buttons (BTN1). Custom heights and colors are STANDARD COLORS
also available.
CAT. NO.* DESCRIPTION POST HEIGHT Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
FP936K 36" 90 Degree Fascia Post Kit 46" (1168 mm) Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is critical,
FP942K 42" 90 Degree Fascia Post Kit 52" (1321 mm) please contact Technical Sales for additional information.
FP948K 48" 90 Degree Fascia Post Kit 58" (1473 mm) Additional Color Options - CRL has over 250 quick turn custom color options with
Minimum order: 1 each. *Specify powder coat color when ordering. the ability to color match as well.
CRL 90 Degree Fascia new

Mount Brackets MANUFACTURED IN THE USA
BY C.R. LAURENCE
• Specifically Designed for Outside 90

Degree Fascia Mount Installations
• Works With Almost Any Deck
• Seven Standard Colors Available to
Match All CRL Aluminum Railings
Use these CRL 90 Degree Fascia Mount
Brackets to attach 2-3/8" (60.3 mm) Vertical
Posts to the side of the almost any deck.
2-3/8"
(60.3 mm)
Square
Post 6" 3"
(152.4 mm) (76.2 mm)
2-3/4"
Bottom Plate (69.9 mm)
CAT. NO. COLOR

FB2W Sky White
STANDARD COLORS
FB20W Oyster White
FB2AGY Agate Gray
FB2BGY Beige Gray
FB2BL Matte Black
FB2BRZ Matte Bronze Gloss Gloss Gloss Gloss Matte Gloss Matte
NOTE: Not for use with our FB2GRN Forest Green Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is critical,
4" x 4" Vertical Posts. Minimum order: 1 each. please contact Technical Sales for additional information.

CRL Fascia Mount Brackets

• Seven Standard Colors Available to
Match All CRL Aluminum Railings MANUFACTURED IN THE USA
BY C.R. LAURENCE
Using Our 2-3/8" (60.3 mm) Square An ISO9001:2000 Certified Company
Aluminum Posts
Use the CRL Fascia Mount Bracket to attach Vertical Posts
to the face of any deck (see page R719 for mounting hardware).
NOTE: Not for use with our 4 x 4 Vertical Posts.
CAT. NO. COLOR
FB1W Sky White
FB10W Oyster White
FB1AGY Agate Gray
FB1BGY Beige Gray
FB1BL Matte Black
FB1BRZ Matte Bronze
FB1GRN Forest Green
Minimum order: 1 each. See page R725 for color chart. 2-3/8"
(60.3 mm)
Square
Post
6"
(152.4 mm)
4-3/8"
(111.1 mm)
6"
(152.4 mm)
3"
(76.2 mm)
2-3/4"
(69.9 mm) (2) #14 x 1-1/2"
(2) #12 x 3/4"
Bottom Plate Flat Head Flat Head
Phillips Phillips Screws
Screws (Included)
(Included)
CRL Touch-Up Paint

• Matches Seven CRL Powder Paint Colors
• Used to Cover Scratches or Bare Metal Ends
CAT. NO. COLOR Use CRL Touch-Up Paint to
SP8W Sky White touch up scratches or bare metal
SP80W Oyster White ends. It can be applied at the job
SP8AGY Agate Gray site, thus eliminating the need for
SP8BGY Beige Gray costly dismantling and reassembling
SP8BL Matte Black
of the affected parts. Touch-Up
SP8BRZ Matte Bronze
SP8GRN Forest Green Paint is a cost and labor saver.
12 ounces (340 g) per can.
Minimum order: 1 each. See page R725 for
color chart.

CRL Aluminum Railing Small Showroom Displays new

• Great for Showrooms or Trade Shows
• Powder Painted in
Seven Standard Colors MANUFACTURED IN THE USA
BY C.R. LAURENCE
• Other Colors Available on Request An ISO9001:2000 Certified Company
These Small Displays are ideal for use in showrooms and

at trade shows. Displays come complete with 1/4" (6 mm)
clear tempered glass or aluminum pickets, and can be
supplied with or without a wood base. The standard finish
for our Railing Displays is Sky White, or you can specify one
of our other standard colors (see below) when ordering.
Small Displays can ship via U.P.S.
SMALL WHITE FINISH RAILING DISPLAY WITH WOOD BASE SMALL WHITE FINISH RAILING DISPLAY WITHOUT WOOD BASE
GLASS DISPLAY PICKET DISPLAY BASE GLASS DISPLAY PICKET DISPLAY APPROXIMATE
CAT. NO. CAT. NO. MEASURES RAILING SERIES CAT. NO. CAT. NO. SIZE RAILING SERIES
ARS1S ARS1PS 30" x 12" (762 x 305 mm) 100 Series ARS1SN ARS1PSN 24" (610 mm) Square 100 Series
CRL Aluminum Railing Large Showroom Displays new

• Powder Painted in Seven Standard Colors
• Other Colors Available on Request
• Great for Showrooms or Trade Shows BY C.R. LAURENCE

These Large Displays are ideal for use in showrooms and

at trade shows. Displays come complete with 1/4" (6 mm) clear
tempered glass or aluminum pickets fully assembled, and can be
supplied with or without a wood base. The standard finish for our
Railing Displays is Sky White, or you can specify one of our other
standard colors (see below) when ordering. Large Displays are
crated and must ship via common carrier.
LARGE WHITE FINISH RAILING DISPLAY WITH WOOD BASE LARGE WHITE FINISH RAILING DISPLAY WITHOUT WOOD BASE
GLASS DISPLAY PICKET DISPLAY BASE GLASS DISPLAY PICKET DISPLAY APPROXIMATE
CAT. NO. CAT. NO. MEASURES RAILING SERIES CAT. NO. CAT. NO. SIZE RAILING SERIES
ARS1L ARS1PL 48" x 24" (1219 x 610 mm) 100 Series ARS1LN ARS1PLN 36" (914 mm) Square 100 Series
CRL ARS Standard • Contains Color Chips of

All Seven Standard Colors
The SCCS7 Color Chip Chain contains Color Chips
of the seven most popular colors used for windscreens
Color Chip Chain • Ideal for Showroom Display

and railings. Convenient to take along on field sales
calls. Chips for custom colors are also available.
The minimum order is one each.
or for Field Sales Calls
STANDARD COLORS
CAT. NO. SCCS7 critical, please contact Technical Sales for additional information.


1. Post Installation 2. Cap Rail Installation
Install End and Corner Posts first, then continue with Intermediate Posts. Be sure Measure and cut the Cap Rail to length. Attach the Cap Rail to the Posts using Self
to place Stainless Steel Washers under the Bolts so that the Bolt Cover Buttons can be Tapping Screws. Install the End Caps with provided screws.
attached. Ensure that Posts are plumb and level. NOTE: When installing Post on top
of concrete, brick, masonry, or stucco, always make sure to install the Moisture Barrier
Gasket between the substrate and the Bottom Plate.
3. Rail Connecting Blocks 4. Top Rail Infill and Bottom Rail

Install the Rail Connecting Blocks onto the Posts using the Self Tapping Screws Cut Top Rail Infill and Bottom Rail to length. Snap fit the Top Rail Infill into the
provided. These Blocks are used to support the Bottom Rail. Top Cap Rail. Mount the Bottom Rail onto the Blocks and secure with Tek Screws.
5. Vinyl Installation (Glass Panels Only) 6. Glass Installation (Glass Panels Only)
Snap fit Top Vinyl into Top Cap Rail insert. Snap fit Bottom Vinyl into Bottom Rail. Push Glass up into the Vinyl. Align Glass with Bottom Vinyl and push down into
Vinyl. Align Glass horizontally.
7. Picket Installation 8. Cable Installation

Follow above steps 1, 2, and 3 only. Screw Pickets to the Top Cap Infill and the Drill holes in Posts a maximum of 3" (76.2 mm) on center. Insert Cables
Bottom Rail. Snap fit top into Top Rail and install Bottom Rail over Blocks. through holes. Install Tensioning Device on end of Cable and tighten.
Secure Bottom Rail to Blocks with Tek Screws. Distance between Posts should not exceed 36" (914 mm).

A
C.R. Laurence Co.
ARS Quote/Order
Request Form

Contact Fax #
Job Name Date
When you are ready to order, utilize this form to assist you in IMPORTANT: Depending on the complexity of your project, one or more of
covering the details required to complete an Aluminum Railing the following may be required to accurately order: sketches or drawings of
installation. Going through this exercise should prevent you your particular application with dimensions; printed architectural drawings or
from overlooking any details related to your installation. CAD files; photos of job site conditions (digital images are preferable).
QUANTITY TOP RAIL RAIL HEIGHT (AT TOP)

Posts Needed Series 100, Small Round Top 36" (914 mm)
Series 200, Flat Top 42" (1067 mm)
Series 300, Large Round Top 48" (1219 mm)
Series 350, Oval Top Other (Specify)
Series 400, Wide Top
POST SIZE DECK RAIL INFILL STAIR RAIL INFILL
2-3/8" x 2-3/8" (60.3 x 60.3 mm) Glass (Thickness) Glass (Thickness)
4" x 4" (101.6 x 101.6 mm) Picket Round Rectangular Picket Round Rectangular
Stainless Steel Cable Stainless Steel Cable
Other (Specify) Other (Specify)
(Glass not supplied by CRL)
POST ATTACHMENT SUBSTRATE FLOOR CONDITION
Surface Mount (Top of Deck Surface) Wood Flat
Core Mount Concrete Sloped (Degrees)
Fascia Mount Waterproof
Other (Specify) Other (Specify)
COLOR
Sky White Oyster White Agate Gray Beige Gray Matte Black Matte Bronze Forest Green
RAL Color (Specify)
Special (Specify)

ARS 100 Series Aluminum Railing System With Core Mount Posts and Pickets
ARS 100 Series Aluminum Railing System With Fascia Mount Posts and Glass ARS 200 Series Aluminum Railing System With Core Mount Posts and Glass

ARS 200 Series Aluminum Railing System With Fascia Mount Posts and Pickets ARS 100 Series Aluminum Railing System With Fascia Mount Posts and Glass

CRL Standard 4" x 4" Square • Complete With Post, Top Cap, Base Plate,
Moisture Barrier Gasket, Screws, Stainless
Surface Mount Post Kits Washers, and Bolt Cover Buttons
• 4" (101.6 mm) Square Posts Designed STANDARD KITS INCLUDE:
to Work With Our 100, 200, 300, 350,
and 400 Series Aluminum Railings
• Use for Center, End or 90 Degree Corners
• Use for Windscreens Too
(See Page R766
• Three Different Height Post Kits Available
Also Available
CRL Standard 4" x 4" Aluminum Post Kits come
complete with Base Plate (BP6), Moisture Barrier
Gasket (BPG3BL), Base Plate Screws (BPS112),
Stainless Steel Washers (WSHR1), Color Match Bolt
Cover Buttons (BTN1), and Post Cap (PC4). See
page R719 for Anchors or Lag Bolts for mounting to
the substrate. Post Kits are available in your choice
of three heights and seven attractive colors. Custom STANDARD COLORS
heights and colors are also available.
CAT. NO.* DESCRIPTION HEIGHT Gloss Gloss Gloss Gloss Matte Gloss Matte
4P36K 36" Post Kit 37" (940 mm) Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color
4P42K 42" Post Kit 43" (1092 mm) match is critical, please contact Technical Sales for additional information.
4P48K 48" Post Kit 49" (1244 mm) Additional Color Options - CRL has over 250 quick turn custom color options with
CRL Standard 4" x 4"

Square Posts Only
• 4" (101.6 mm) Square Post Designed
to Work With Our 100, 200, 300, 350,
and 400 Series Aluminum Railings
• Use for Center, End or 90 Degree Corners
Also Available
4"
CRL Standard 4" x 4" Aluminum Square Posts (101.6 mm)
are available in your choice of three heights and
seven attractive colors. Custom heights and colors
are also available. You can also order our 20'-1"
(6.12 mm) stock length to cut posts of any height
4" (101.6 mm)
required. Posts are designed to mount onto
STANDARD COLORS
concrete, wood, steel, and other substrates.

4P36 36" Post 37" (940 mm) Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
4P42 42" Post 43" (1092 mm) Gloss Gloss Gloss Gloss Matte Gloss Matte
4P48 48" Post 49" (1244 mm) Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color
4P241 20'-1" Stock Length 241" (6.12 m)#

CRL Standard 4" x 4" Post Caps CRL 6-1/2" Square Base Plates
• Seven Standard Colors to • For Use With Our 4" x 4" Vertical Posts
Match Our 4" x 4" Posts • Seven Standard Colors
• Easy to Install This Square Base Plate screws into our 4" x 4" Vertical Post
raceways, and is countersunk to accept four Cat. No. BPS112 Base
Plate Screws. Attach to substrate with Concrete Anchors or Lag Bolts
(see page R719). Use Stainless Steel Washers (WSHR1) and Color
Match Bolt Cover Buttons (BTN1) to add a finished look. One each
Moisture Barrier Gasket Cat. No. BPG3BL is included with each Base
Plate. See page R718 for replacement Gaskets.
3/4" Holes for 3/8"
(19 mm) Anchoring
(9.5 mm)
Posts
Thick
5"
(127 mm)
6-1/2" 3/8" Dia.
(165.1 mm) (9.5 mm)
3/4" Anchoring Holes
(19 mm) 6-1/2"
(165.1 mm)
CAT. NO. COLOR CRL 4" x 4" Aluminum Post CAT. NO. COLOR
PC4W Sky White Caps are designed to fit our BP6W Sky White
PC40W Oyster White Standard 4" x 4" Posts. They BP60W Oyster White
PC4AGY Agate Gray protect the exposed top edge BP6AGY Agate Gray
PC4BGY Beige Gray from weather and debris. Caps BP6BGY Beige Gray
PC4BL Matte Black BP6BL Matte Black
install easily with CRL 95C
PC4BRZ Matte Bronze BP6BRZ Matte Bronze
Silicone (see page R721).
PC4GRN Forest Green BP6GRN Forest Green
CRL Standard Post Rail CRL Base Plate Screws

Connecting Blocks • Stainless Steel Screws for Use
With All Square Base Plates
• To Connect Top Rails
The CRL Base Plate Screw is designed to secure Base Plates
to Vertical Posts into the raceways of Vertical Posts. Phillips Head Screw fits flush
beneath the Base Plate.
Post
BP6
Base
RCBS Plate
Screw BPS112
Screws
Rail
Connecting
Block
Use CRL Rail Connecting Blocks to connect the 200, 300, 350 or
400 Series Top Rails to a 4" x 4" Vertical Post or a wall. Screw Block
into index grooves on post using Cat. No. RCBS Rail Connecting
Block Screws (see page R709). Miter cut the 12" or 241" lengths
when building stairs, slopes, and angles. All Connecting Blocks are
extruded aluminum with a weather resistant chromate finish.
1-1/8"
CAT. NO. LENGTH (28.6 mm)
RCB4 1" (25.4 mm)
RCB412 12" (304.8 mm) CAT. NO. DESCRIPTION SIZE
RCB4241 241" (6.12 m)# 2-3/8" BPS112 Base Plate Screw #14 x 1-1/2" (38.1 mm)
Minimum order: 1 each. # Must ship common carrier. (60.3 mm) Minimum order: 50 each. Must be ordered in increments of 50.

CRL Decorative Cap Light for 4" x 4"

Vertical Aluminum Posts
• Great for Illuminating Walkways or Pool Areas
• Low Voltage Circuit Includes 18-Watt Bulb
• 12 Volts and UL/CUL Listed
• Fast and Easy Installation
• Weatherproof, Durable Finish
• Seven Standard Colors, With Custom Colors
Available on Request
This Decorative Cap Light comes with bulb socket, bulb, and
12 Volt wiring. Designed to attach to CRL 4" x 4" Vertical
Aluminum Posts to give your railing system a unique
appearance and natural glow. Made from solid cast aluminum,
this Cap Light is a safe and sturdy component for our Aluminum
Railing line. Please consult a local electrician for wiring
instructions and power supply.
CAT. NO. COLOR

PCL1W Sky White
PCL10W Oyster White
PCL1AGY Agate Gray
PCL1BGY Beige Gray MANUFACTURED IN THE USA
PCL1BL Matte Black BY C.R. LAURENCE
PCL1BRZ Matte Bronze

PCL1GRN Forest Green
CRL Post Mounted Decorative

Light With Hood
• Gives Your Railing a Unique Appearance
• Illumination Adds Safety to Walkways or
Pool Areas
• Low Voltage Circuit Includes 20-Watt Bulb
• Fast and Easy Installation MANUFACTURED IN THE USA
BY C.R. LAURENCE
• 12 Volts and UL Listed An ISO9001:2000 Certified Company

Available on Request
This Aluminum Post Mounted Decorative Light With Hood
comes with backer, socket, 20-watt bulb, and 6" (152 mm) of
lead wire. This unit mounts attractively on our 4" x 4" Vertical
Posts, or our 2-3/8" Rectangular Posts. It is not recommended
for our 3" Diameter Round Posts. Please consult a local
electrician for wiring instructions and power supply.
CAT. NO. COLOR

ACH1W Sky White
ACH10W Oyster White
ACH1AGY Agate Gray
ACH1BGY Beige Gray
ACH1BL Matte Black
ACH1BRZ Matte Bronze
ACH1GRN Forest Green

CRL Post Mounted LED Light

• Gives Your Railing a Unique Appearance • Low Voltage, 12 Volts
• Seven Standard Colors With 1.6-Watt LED
• Custom Colors Also Available • Brilliant 57k Blue White
Light Output
• Fast and Easy Installation
• 50,000 Hour Bulb Life
Post
This LED Post Mounted Light attaches to 4" x 4"

Vertical Posts or 2-3/8" Rectangular Posts to give Wiring Surface
Mounted
your railing system a unique appearance. Low Light
voltage, long lasting 50,000-hour bulb life. Please
12/24
consult a local electrician for wiring instructions Flat Head
and power supply. Phillips
Anchor
CAT. NO. DESCRIPTION Set Screw

LED1C* Post Mounted LED Light Unit
Minimum order: 1 each. * Please specify color when ordering. See page R730 for color chart.
CRL Continuous LED Lighting Strips

• Black Plastic Rigid Housing Surface Mounts
Directly to Your Railing
• Great for Illuminating Walkways and Paths
• 50,000 Hour Bulb Life
• Low Voltage, 12 Volts With 1.6-Watt LED
• Lights Available in White, Various Colors, Top Rail
and Changing Colors for Posts and Rails
Surface
• 3 Watts Per Foot Mounted
Continuous
Self-Tapping
Lighting
Tek Screw
Wiring
Lighting paths for evening and night walks are very
popular. They not only add a safety element, but also
improve the aesthetics of the surroundings. With all
the improvements in lighting sources and types Post
available, we can provide almost limitless options
for just the right lighting system for any project. CAT. NO. DESCRIPTION
LED2C Continuous LED Light Strips
CRL Low Voltage LED Power Supply

• 25 Watts, 12 Volts DC Regulated
Supply Comes Ready to Install
This special LED Power Supply converts 120/240 Volt AC into low voltage
DC power. This solid-state unit has special circuitry to provide only the needed
voltage and current demand required by the LED's, and no more. Has enough
power to run 12 1-Watt Emitters. May require a 6" x 6" (152.4 x 152.4 mm)
junction box in some jurisdictions. Minimum order is one each. CAT. NO. PT2512

1-1/2" Diameter Quick Connect Hand Rail System new

• Designed for Stairway and Handicap Ramp Areas
• Meets and Exceeds ADA Requirements
• Easy to Install
CRL's Quick Connect Hand Rail System is designed for
stairways, handicap ramps, and any areas that require hand rails.
This system can used with any of CRL's ARS Aluminum Railing
Systems and can be custom powder coated to match job specific
requirements. Designed for exterior and interior applications and
offered in seven standard colors this hand rail system will save
you labor during installation and give you a great look when Building
Codes require a hand rail.
Typical ARS Quick Connect Hand Rail Installation

CRL's ARS Aluminum
Railing System
BY C.R. LAURENCE
Cat. No. ARHR15

1-1/2" Diameter Hand Rail
Cat. No. AR35

1-1/2" Diameter
Custom Angle Corners Cat. No. ARLR1
Looped Hand Rail Return
Cat. No. RCB36

Hand Rail Connector
Splice Sleeve
Cat. No. ARHB1

Hand Rail Bracket
Cat. No. AR1EC

Hand Rail Color
Match Endcap
Railing Systems Technical Assistance

Component selection and glass sizing assistance is available
from CRL Technical Sales. Allow our Railing Specialists to help
you choose the right number and size of components to finish your
planned installation with a minimum of waste. Call (800) 421-6144
in the U.S., (877) 421-6144 from Canada, or (323) 588-1281
International. Ask for Extension 7730. You can also send e-mail
from the crlaurence.com home page. Click on Contact Us, and
then click on Technical Sales.

CRL Quick Connect 1-1/2" Diameter Aluminum Hand Rail

• 20'-1" (6.12 m) Long Stock Lengths
new
CRL's 1-1/2" (38.1 mm) Diameter Hand

Rail is sold in 20'-1" (6.12 m) lengths and is
available in seven standard powder coated
finishes. Custom finishes, lengths, and 1-1/2"
(38.1 mm) 1/8" (3.2 mm)
special fabrication is also available. Contact Thick Wall
CRL Technical Sales for more information.
241" (6.12 M) ALUMINUM HAND RAIL TUBING

CAT. NO. COLOR
STANDARD COLORS
ARHR15W Sky White
ARHR150W Oyster White
ARHR15AGY Agate Gray
ARHR15BGY Beige Gray
ARHR15BL Matte Black Gloss Gloss Gloss Gloss Matte Gloss Matte
ARHR15BRZ Matte Bronze Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color
ARHR15GRN Forest Green match is critical, please contact Technical Sales for additional information.
Minimum order: 1 each. Must ship via common carrier. Additional Color Options - CRL has over 250 quick turn custom color options with
CRL Quick Connect new CRL Quick Connect new

90 Degree Corner 135 Degree Corner
• Seven Standard Colors Available MANUFACTURED IN THE USA
BY C.R. LAURENCE BY C.R. LAURENCE
• Ready to Install An ISO9001:2000 Certified Company
• Welded and Finished • Welded and Finished

1-1/2" (38.1 mm) Diameter Tubing 1-1/2" (38.1 mm) Diameter Tubing
• Custom Angles Also Available • Custom Angles Also Available
135˚
12"
(305 mm) 12"
90˚ (305 mm)
12"
(305 mm) CL
CL CL
12"
(305 mm) CL
Each CRL Quick Connect 90 DEGREE CORNERS Each CRL Quick Connect 135 DEGREE CORNERS
90 Degree Corner is fabricated, CAT. NO. COLOR 135 Degree Corner is fabricated, CAT. NO. COLOR
finished, powder coated, and finished, powder coated, and
AR90W Sky White AR35W Sky White
individually packed. The 90 individually packed. The 135
AR900W Oyster White AR350W Oyster White
Degree Corners can be used for AR90AGY Agate Gray Degree Corners can be used for AR35AGY Agate Gray
horizontal and vertical AR90BGY Beige Gray horizontal and vertical AR35BGY Beige Gray
applications. Use CRL Cat. No. AR90BL Matte Black applications. Use CRL Cat. No. AR35BL Matte Black
RCB36 connector splices for for AR90BRZ Matte Bronze RCB36 connector splices for for AR35BRZ Matte Bronze
joining handrail together (see AR90GRN Forest Green joining handrail together (see AR35GRN Forest Green
page R736). Minimum order: 1 each. All Railing Corners can be page R736). Minimum order: 1 each. All Railing Corners can be
combined for quantity pricing. combined for quantity pricing.

CRL Quick Connect Aluminum new

Hand Rail Bracket
• Seven Standard Powder Coated Finishes MANUFACTURED IN THE USA
BY C.R. LAURENCE
• For 1-1/2" (38.1 mm) Hand Rail Tubing

2-1/2"
1-3/4"
CRL Quick Connect Hand CAT. NO. COLOR (44.5 mm)
Rail Brackets are available ARHB1W Sky White
in seven standard colors for 4-5/16"
ARHB10W Oyster White (109.5 mm)
1-1/2" (38.1 mm) diameter 4-5/16"
ARHB1AGY Agate Gray 2-11/16" (109.5 mm)
hand rail tubing. Brackets ARHB1BGY Beige Gray (68.3 mm) 5/16"
are individually packed with ARHB1BL Matte Black (7.9 mm)
one #14 X 3/4" long, self ARHB1BRZ Matte Bronze
drilling stainless steel ARHB1GRN Forest Green 15/16" 15/16"
(23.8 mm) 1/4" 1-7/8" (23.8 mm)
attachment screw. Minimum order: 1 each. All Railing Brackets can be
(6.3 mm)
combined for quantity pricing. (47.6 mm)
CRL Quick Connect Stabilizing Aluminum Sleeves

• Provides Proper Alignment at Splices
• Use to Stabilize End Sections of
new
1-1/2" (38.1 mm) Hand Rail Diameter Tubing
• 6005 Alloy Aluminum/T5 Temper MANUFACTURED IN THE USA
BY C.R. LAURENCE
CRL Quick Connect Sleeves are used to connect and provide

proper alignment between railing splices. You can also use these
as Stabilizing Sleeves to terminate a handrail into a wall or post by 1-1/4"
anchoring the aluminum sleeve prior to sleeving the handrail into (31.8 mm)
place. Use CRL Cat. No. RCBS #10 X 2" long screw for wall mount
conditions. Use of or Cat. No. 32629 Metal Contact Cement (see
page R667) is required to achieve a secure and permanent bond.
1-3/16"
CAT. NO. MATERIAL SIZE (30.1 mm)
RCB3 Mill Aluminum 1" (25.4mm)
RCB36 Mill Aluminum 6" (152.4mm)
RCB3241 Mill Aluminum 241" (6.12m) #
Minimum order: 1 each. All Railing Connectors can be combined for quantity pricing. # Must Ship via common carrier.
CRL Quick Connect Color Match End Cap

• Snap-On Fit
• Seven Standard Colors Available new
• Use With 1-1/2" (38.1 mm)
Diameter Tubing
CRL Color Match End CAT. NO. COLOR

Caps are designed to easily AR1ECW Sky White
pressure fit into the ends of AR1EC0W Oyster White
1-1/2" (38.1 mm) diameter AR1ECAGY Agate Gray
tubing. No silicone or AR1ECBGY Beige Gray
AR1ECBL Matte Black
contact cement is required
AR1ECBRZ Matte Bronze
during installation.
AR1ECGRN Forest Green
Minimum order: 50 each. Must be ordered in
increments of 50. See page R735 for color chart.

CRL Quick Connect Looped

Hand Rail Return new
• Seven Standard Colors Available
• Custom Sizes and Colors MANUFACTURED IN THE USA
BY C.R. LAURENCE
also Available An ISO9001:2000 Certified Company
• Use With 1-1/2" (38.1 mm)

Diameter Tubing 24"
(609.6 mm)
Each 1-1/2" (38.1 mm)
Diameter Quick Connect CL
Looped Return is designed CAT. NO. COLOR
for hand rail applications that 9" R 3-3/4"
1-1/2" (38.1 mm) ARLR1W Sky White
cannot return to the wall or (228.6 mm)
Oyster White
Diameter ARLR10W
floor. The Looped Returns are ARLR1AGY Agate Gray
designed to be field fabricated ARLR1BGY Beige Gray
to size for job site condition. 10-1/2" Matte Black
(266.7 mm)
ARLR1BL
End caps and Splice Plates are ARLR1BRZ Matte Bronze
C
sold separately (see page R736). L ARLR1GRN Forest Green
Minimum order: 1 each. All Railing Returns can be
The ends are designed to be combined for quantity pricing. See page R735 for
cut to size at the job site color chart.
CRL Quick Connect Wall new

Hand Rail Return
BY C.R. LAURENCE
• Use With 1-1/2" (38.1 mm)

Diameter Tubing
Each Quick Connect Wall Return is CAT. NO. COLOR

Color Match End
fabricated, finished, powder coated, and 1-1/2" Caps Sold ARWR1W Sky White
(38.1 mm) Separately
individually packaged. These hand rail Diameter ARWR10W Oyster White
(see page R736) ARWR1AGY Agate Gray
returns are designed for terminating a 2-5/8"
hand rail into a wall or post at the end of (66.7 mm) ARWR1BGY Beige Gray
a run. Use CRL part # RCB36 connector ARWR1BL Matte Black
ARWR1BRZ Matte Bronze
splices for joining hand rail together 12"
Welded and ARWR1GRN Forest Green
(see page R736). (304.8 mm)
Powder Coated Minimum order: 1 each. All Railing Returns can be
combined for quantity pricing. See page R735 for
color chart.
CRL Railing Technical

Assistance
CRL Railing Technical Sales can be reached
Monday through Friday from 6:00 am to 5:00 pm
Pacific Time. Phone toll free (800) 421-6144 from
anywhere in the U.S., (877) 421-6144 from anywhere
in Canada, or (323) 588-1281 International, and ask
for Ext. 7730.
You can also send e-mail requests for quotes or
product information from the crlaurence.com home
page. Click on Contact Us, and then click on
Technical Sales.

CRL ACRS ALUMINUM COMPONENT RAILING SYSTEM Contact CRL Tech Sales for complete planning
CRL Aluminum Component Railing System (ACRS) new

• Combines the Clean Look of Welded Railings The new CRL Aluminum Component Railing System
(ACRS) utilizes 1-1/2" Schedule 40 Aluminum Pipe with a
With the Benefits of Mechanical Systems 1.9" (48.3 mm) outside diameter and .145" (3.68 mm) wall
• Designed to Meet Most Building Codes thickness. We offer a wide selection of component fittings to
allow the installer the freedom and ability to create an
• Corrosion Resistant Satin Anodized Finish attractive aluminum railing system without the need of costly
• Custom Powder Coat Finishes Also Available welding and refinishing.
There are three easy ways to order: individual components;
• Pre-Fabricated Systems Available by Special Order pre-assembled posts with individual components and stock
lengths for field fabrication of the horizontal runs; and
• Component Selection Assistance Available to Make complete pre-fabricated systems that are cut to your
Ordering Simple specifications and ready to install.
1
4 2
10
6
7
9
3
For Use With HR19SA

Satin Anodized Tubing
(See page R739)
ACRS Post Railing Components Used in Component Railing

the Typical Installation Shown Above System Assistance
1 A19STA Straight Tee Adaptor - Page R742 Component selection
2 A1990E 90 Degree Elbow - Page R740 assistance is available from
3 A19CA Cross Adaptor - Page R743 CRL Technical Sales. Allow
4 A19CPA Corner Post Adaptor - Page R739 our Railing Specialists to
help you choose the right
5 A19EL End Loop - Page R742
number and style of
6 A190T32 Obtuse Angled Tee Adaptor - Page R742
components to finish your
7 A19AT32 Acute Angled Tee Adaptor - Page R745
planned installation with a
8 A19FF Floor Flange - R745 minimum of waste.
9 A19FEC End Cap - Page R740
10 A19ABN32 Tangent Bend - Page R741
Call (800) 421-6144 in the U.S., (877) 421-6144 from Canada,
or (323) 588-1281 International, and ask for Ext. 7730. You can
NOTE: Consult local buildings codes. Infills may be required in certain applications.
See pages R631 to R635 for our complete line of Z-Series Glass Clamps to facilitate also send e-mail from the crlaurence.com home page. Click on
your needs. Contact Us, and then click on Technical Sales.

CRL ACRS ALUMINUM COMPONENT RAILING SYSTEM For Pricing on CRL Products, Call Toll Free
CRL Hand Railing Tubing

• Requires End Caps, Splice Couplings,
or Adaptors (Not Included)
All CRL Hand Railing Tubing is formed using
precision tooling to maintain uniform diameters,
allowing for smooth hairline transitions at splices
and end caps. Wall thickness is .145" (3.68 mm).
1.9" (48.3 MM) DIAMETER HAND RAILING TUBING 1.9" .145"

(48.3 mm) (3.68 mm)
CAT. NO. FINISH LENGTH
HR19SA Satin Anodized 240" (6.09 m)
Minimum order: 1 each. All Hand Rail Tubing can be combined for quantity pricing.
Must ship common carrier.
CRL ACRS Wall Return new

• Satin Anodized Finish
• Powder Coat Finishes 3"
Available on Special Order (76.2 mm)
The CRL ACRS Wall Return is made from 1-1/2"

Schedule 40 Pipe and is used to make a smooth
12"
radius return back to a wall when terminating a hand (305 mm)
rail. It attaches to 1-1/2" Schedule 40 Aluminum Pipe
using Cat. No. A19SC Splice Coupling, giving you a
clean, smooth, and easy to assemble connection.
NOTE: Splice Couplings must be ordered
separately (see page R741).
CAT. NO. FINISH

A19WR Satin Anodized
CRL ACRS End Loop

new
• Powder Coat Finishes Available on Special Order
• Custom Loops Available on Special Order
The CRL ACRS End Loop is made from 1-1/2" 12"
Schedule 40 Pipe and is used to complete A.D.A. (305 mm)
Code compliant hand rails at the top or bottom of a
stair or ramp. Attach both ends to 1-1/2" Schedule
40 Aluminum Pipe using either Splice Couplings or
Tee Adaptors, or a combination of both, giving you total 18"
(457 mm)
flexibility in your design.
NOTE: Splice Couplings (see page R741) or Tee
Adaptors (see page R742) must be ordered separately.
20"
(508 mm)
CAT. NO. FINISH
A19EL Satin Anodized

CRL ACRS 90 new

Degree Elbow
• Powder Coat Finishes
Available on Special Order
CRL ACRS 90 Degree Elbows are 1-29/32"
used to make a smooth radius transition (48.3 mm)
around 90 degree corners. 1-1/2"
Schedule 40 Aluminum Pipe attaches to
both ends of the Elbow using the same CL CL
split-tang technology as all the ACRS 1-3/8" R2-1/4" 1-3/8"
Components, giving you a clean, (34.8 mm) (R57.15 mm) (34.8 mm)
smooth, and easy to assemble
connection. For Drilling Jig see page 1-5/16"
R745. NOTE: Elbows are a cast part, (33.1 mm)
1-29/32"
and some color variation from the Pipe (48.3 mm)
to the Elbows will occur.
CAT. NO. FINISH 1-5/16" 1-29/32"

A1990E Satin Anodized (33.1 mm) 1-3/8" CL (48.3 mm)
Minimum order: 1 each. (34.8 mm)
CRL ACRS End Cap new

CRL ACRS End Caps are simple to install,

just position them over a clean, square cut
end of your 1-1/2" Schedule 40 Aluminum
Pipe, and drive them into place using a rubber
mallet. NOTE: End Caps are a cast part, and 1-29/32"
some color variation from the Pipe to the (48.3 mm)
Diameter
Caps will occur. 1-29/32"
11/32" (48.3 mm)
FINISH (8.7 mm) Diameter
CAT. NO.
A19FEC Satin Anodized
CRL ACRS Replacement

Fastener Kit new
• For Securing ACRS Adaptors
to 1-1/2" Schedule 40 Pipe
The ACRS Replacement Fastener Kit includes 10 of the following:
3/8"-16 x 1-7/16" (36.5 mm) Stainless Steel Set Screws; 5/16"-18 x 1-1/4"
(31.7 mm) Stainless Steel Socket Head Cap Bolts; 5/16"-18 Split Ring
Lock Washers; 5/16" Rivet Nuts for use with 1-1/2" Schedule 40 Pipe.
Minimum order is one pack. CAT. NO. A19FKT

CRL ACRS Tangent Bend new

Available on Special Order 8-1/2"
(216 mm)
• Custom Angles Available
8-1/2"
on Special Order (216 mm)
5, 29, or 32
The CRL ACRS Tangent Bend is used to transition Degrees
from sloped to level sections of a railing at stairs or
ramps. It can attach to 1-1/2" Schedule 40 Aluminum
Pipe at both ends, using either Splice Couplings or Tee
Adaptors, or a combination of both, giving you total
flexibility in your design. Tangent Bend is pre-drilled
for Splice Coupling or Tee Adaptor.
NOTE: Splice Couplings (see below) or Tee Adaptors
(see page R742) must be ordered separately.
CAT. NO. CAT. NO.

ACUTE BEND OBTUSE BEND ANGLE FINISH
A19ABN5 A190BN5 5 Degrees Satin Anodized
Minimum order: 1 each. Can be combined for quantity pricing.
CRL ACRS Splice Coupling new

• Strong and Secure
• Easy Installation
The CRL ACRS Splice Coupling is designed for use with

1-1/2" Schedule 40 Aluminum Pipe. Two 27/64" (11 mm)
holes need to be drilled in the pipe to access the set screws
to create a strong and secure splice joint. Set screws
included. Minimum order is one each.
CAT. NO. A19SC
1-9/16"
(39.7 mm)
4"
(101.6 mm)
5/8" 5/8"
(15.9 mm) (15.9 mm)

CRL ACRS Straight new

Tee Adaptor
CRL ACRS Straight Tee Adaptors are
used to join posts and horizontal railings 1-1/16"
together to form 90 degree intersections. (26.7 mm)
Simply attach the Adaptor with the 1/4"-20 1/4"
(6.4 mm)
socket head cap screw and rivet nut
supplied to 1-1/2" Schedule 40 Aluminum
Pipe. A 27/64" hole needs to be drilled for
the fastener. Then slip the intersecting CL CL
pipe over the tanged end of the Adaptor 1-29/32
(48.3 mm)
and tighten the internal set screw to secure.
Drilling a 27/64" hole into the intersecting
pipe accesses the set screw. For Drilling
Jig see page R745.
1-3/8"
1-3/8" 1-1/4" (34.8 mm)
CAT. NO. FINISH (34.8 mm) (31.4 mm)
A19STA Satin Anodized CL
Minimum order: 1 each. All ACRS Adaptors can be combined for quantity pricing.
CRL ACRS Angled new

Tee Adaptors Acute
Tee
• Satin Anodized Finishes Obtuse

Tee
CRL ACRS Angled Tee
Adaptors are used to join posts
and horizontal railings together to
form angled intersections for
stairs and ramps. They attach in
the same manner as the Straight Obtuse Tee
Tees, and are available in three
standard angle configurations. A
Custom angles are available by
special order to meet your
specific needs. For Drilling Jig
see page R745.
Acute Tee 1-29/32"

(48.3 mm) B
CAT. NO. CAT. NO.
ACUTE TEE OBTUSE TEE ANGLE "A" "B" FINISH 1-5/16"
A19AT5 A190T5 5 Degrees 7/16" (11.8 mm) 5/16" (7.5 mm) Satin Anodized (33.3 mm)
A19AT29 A190T29 29 Degrees 1-13/16" (46.3 mm) 3/4" (19.3 mm) Satin Anodized
A19AT32 A190T32 32 Degrees 1-7/8" (47.6 mm) 11/16" (17.5 mm) Satin Anodized

CRL ACRS Cross Adaptors new

CRL ACRS Cross
Adaptors are used to join
posts and horizontal
railings together to form
four-way intersections or
'crosses' from 145 to 180
1/4" 1/4"
degrees. They attach in 1-3/8" (6.4 mm) (6.4 mm) 1-3/8"
the same manner as our 1-1/4" 1-1/4" (34.8 mm) (34.8 mm)
CL
(31.4 mm) (31.4 mm)
Straight Tee Adaptors. CL CL
Each set includes two
1-1/16" 1-1/16"
Adaptors, and comes (26.7 mm) (26.7 mm)
complete with all hardware
required to complete a
single intersection. For 1-29/32" 1-29/32"
(48.3 mm) (48.3 mm)
Drilling Jig see page R745.
CAT. NO. FINISH 145 to 180

Degrees
A19CA Satin Anodized
CRL ACRS Corner new

Post Adaptors
CRL ACRS Corner Post
Adaptors are used to join
posts and horizontal railings
together to form corners. 1-1/4"
(31.4 mm)
These Adaptors are similar to
the Straight Tee and Cross 1-1/16"
Adaptors, but they allow you (26.7 mm)
to form tighter corners from 90
to 145 degrees. They attach 1-1/16"
(26.7 mm)
in the same manner, but have
been specially coped allowing 1-29/32"
them to attach more closely to 1/4" (48.3 mm)
CL
each other on a post. Each (6.4 mm) 1-1/4"
set includes two Adaptors, (31.4 mm)
and comes complete with all
hardware required to
1-3/8"
complete a single corner. For 1-3/8" (34.8 mm)
1-3/8"
Drilling Jig see page R745. (34.8 mm) (34.8 mm) CL
CL CL 90 to 145
CAT. NO. FINISH
Degrees
A19CPA Satin Anodized
1-29/32"
(48.3 mm)

CRL ACRS Upper new

Adjustable Tee Adaptors
• Adjusts From 10 to 42 Degrees
Trunion
CRL ACRS Upper Adjustable Tee Adaptors are used
to join posts and horizontal railings together at varying
Tee
angles for non-standard stair and ramp conditions. When
you are not sure what angle your stair or ramp is, or you
can't wait for a custom adaptor, this Adjustable Adaptor is
for you. The Trunion portion attaches to the pipe in a
similar manner as the Straight Tee Adaptors. The Tee
portion attaches to the Trunion and is adjustable from Adjustable from
10 to 42 Degrees
10 to 42 degrees. They come complete with all hardware
required to complete a single adjustable angle
intersection. For Drilling Jig see page R745.
NOTE: Adjustable Tee Adaptors are not applicable to 5

degree ramp installations. Trunion is a cast part. Some
color variation from the Pipe to the Adaptors will occur.
CAT. NO. FINISH

A19UAT Satin Anodized Consult Technical Sales for
Drilling Instructions
CRL ACRS Lower new

Adjustable Tee Adaptors
• Adjusts From 10 to 42 Degrees
Available on Special Order Trunion
CRL ACRS Lower Adjustable Tee Adaptors are used
to join posts and horizontal railings together at varying
angles for non-standard stair and ramp conditions. When
Tee
you are not sure what angle your stair or ramp is, or you
can't wait for a custom adaptor, this Adjustable Adaptor is
for you. The Trunion portion attaches to the pipe is a
similar manner as the Straight Tee Adaptors. The Tee
portion attaches to the Trunion and is adjustable from
10 to 42 degrees. They come complete with all hardware
required to complete a single adjustable angle
intersection. For Drilling Jig see page R745.
NOTE: Adjustable Tee Adaptors are not applicable to 5 Adjustable from

degree ramp installations. Trunion is a cast part. Some 10 to 42 Degrees
color variation from the Pipe to the Adaptors will occur.
CAT. NO. FINISH
A19LAT Satin Anodized Consult Technical Sales for
Minimum order: 1 each. All ACRS Adaptors can be combined for quantity pricing. Drilling Instructions

CRL ACRS Cover Flange new

The CRL ACRS Cover Flange is used
to dress up core mounted installations, and
give the project a finished look. It slips on
to the 1-1/2" Schedule 40 Aluminum Pipe,
2-1/4"
and then slides down after installation of the (57.1 mm) R3.25"
post to cover the ring of grout typically visible (82.5 mm)
3/4"
on core mount installations. (19 mm) R2.25"
(57.1 mm)
1/4"
CAT. NO. FINISH 3-1/4" (6.3 mm)
A19CVR Satin Anodized (82.5 mm)
CRL ACRS Floor Flange new

• Two Styles for Flat and Ramp
Applications
When core mounting is not an option, we 2-9/16" 2-9/16"
offer two ACRS Floor Flanges for surface (65 mm) (65 mm)
mounting your posts; one for Flat applications,
and one at 5 degrees for Ramps.
NOTE: Flange mounting fasteners are not
3" 3" 3-3/8"
supplied. Consult a structural engineer for (76.2 mm) (76.2 mm) (85.6 mm)
your specific mounting condition.
CAT. NO. STYLE FINISH 1/2"

1/2" 1-15/16" (12.7 mm) 5 1-15/16"
A19FF Level Satin Anodized (12.7 mm) (49.2 mm) Degrees (49.2 mm)
A19RF Ramp Satin Anodized
CAT. NO. A19FF CAT. NO. A19RF
CRL ACRS Drilling Jig new Aluminum Component

Railing Accessories
• For Accurate Hole Locations Every Time
Post Mounted Brackets Expanding Cements
See pages R670-R671

Stop Up For Stop Down For End
Intermediate Connection Connection
Z-Series Glass Clamps
All CRL ACRS Adaptors and Splice Couplings require accurately
drilled access holes in the 1-1/2" Schedule 40 Aluminum Pipe. Use
our Drilling Jig to simplify the process; it's fast and accurate every time.
Minimum order is one each. See pages R631-R635 See page R721
CAT. NO. A19DJ

CRL ARS ALUMINUM RAILING SYSTEM Contact CRL Tech Sales for complete planning
ARS 200 Series Aluminum Railing System With Cable Infill and Fascia Mounts ARS 350 Series Aluminum Railing System With Glass Infill
AWS Custom Aluminum Windscreen System Powder Coated With Fascia Mounts
AWS Custom Aluminum Windscreen System With Fascia Mounts AWS Custom Aluminum Windscreen Gate With Sidelite Panel

CRL ARS ALUMINUM RAILING SYSTEM For Pricing on CRL Products, Call Toll Free
ARS 200 Series Aluminum Railing System With Custom Textured Glass Infill ARS 300 Series Aluminum Railing System With Pickets
ARS Custom Aluminum Railing System With 3/8" Glass Infill
ARS 350 Series Aluminum Railing System With Glass Infill ARS 200 Series Aluminum Railing System With Glass Infill

CRL AWS ALUMINUM WINDSCREEN SYSTEMS Contact CRL Tech Sales for complete planning
CRL AWS Aluminum Windscreen System

• Accepts 1/4" to 1/2" (6 to 12 mm) Thick Glass for the MANUFACTURED IN THE USA
BY C.R. LAURENCE
Creation of Attractive and Functional Glass Barriers
The AWS Aluminum Windscreen System was developed to provide an attractive, maintenance-free glass wall that will enhance any
residential or commercial application. All AWS Systems can be used in conjunction with a concrete slab, block wall or individual footings.
If our stock components do not fit your application, allow us to design a system that can. CRL has the ability to design, engineer and
fabricate a custom system that will satisfy not only your need for safety and security, but also your artistic tastes.
Visual Appeal – The Homeowner will love the clean look

of this wall and the virtually unobstructed view it provides.
Noise Reduction – The AWS System is superbly suited

as a sound wall along busy streets and highways. Our
system provides a much higher sound transmission rating
than conventional fencing.
Maintenance – The AWS System is low maintenance. All

components are specially coated to prevent corrosion and
ensure that the homeowner will be satisfied for many years.
Flexibility – The AWS System adapts to a wide variety of

terrain and wall designs. It can easily handle slopes, steps,
and curves. In addition, the system is ideal for pool areas,
decks and balcony applications.
Lead Time – We carry 36" (914 mm), 48" (1219 mm), 60"
(1524 mm), and 72" (1829 mm) posts in stock, allowing CRL
to respond almost instantly to your needs. This system can
be installed during almost any phase of construction, allowing
the builder or contractor important scheduling flexibility.
Integrity – The AWS System has been designed to provide

a safe, transparent fence during high wind conditions. All Price – Because of this efficient design, our system is priced very
glass installed must be fully tempered to meet all safety competitively to other less attractive alternatives, such as wrought
requirements and building codes. iron or wood fencing.

CRL AWS ALUMINUM WINDSCREEN SYSTEMS For Pricing on CRL Products, Call Toll Free
CRL AWS Aluminum Windscreen Systems

• Available in 3" Round, 2" x 2-5/8" Rectangular, and 4" Square Post Styles
Unlike other glass wind wall systems, the AWS Aluminum Windscreen System keeps all aluminum MANUFACTURED IN THE USA
BY C.R. LAURENCE
out of contact with concrete. The lime in concrete is very corrosive to aluminum, and over time will degrade An ISO9001:2000 Certified Company
the physical properties of the components. The AWS System utilizes a painted steel embedment
that supports the vertical post and eliminates the possibility of damaging corrosion.
An added benefit of the steel embed is that the contractor can install the steel components early in the construction process, then install the
painted aluminum post later when the chances of damage by other tradesmen are greatly reduced. These are strong attributes of the AWS
System, and have a real value to the builder and homeowner.
Another benefit of the AWS System is the fact that it was designed to be a wind wall system that is very aesthetically pleasing. Because of
the great design and the interaction with the steel insert, AWS has enhanced structural properties. Our system allows for increased height and
span abilities.
The AWS design also solved the problem of glazing vinyl shrinking and falling out over time, creating liabilities for all parties involved.
The AWS glazing channel is a one-piece co-extrusion that cannot fall out once the glass is installed. This glazing channel is faster and easier
to install than typical glazing beads, and simplifies the glass installation.
TYPICAL MOUNTING OPTIONS

Core Mounted Installation Core Mounted Installation Surface Mounted Installation
for a Concrete Slab for CMU Block Walls for a Concrete Slab
Aluminum Aluminum
Aluminum Aluminum
Windscreen Post Windscreen Post Post
Windscreen Windscreen Post
Steel Steel Stanchion

Steel Steel Stanchion
Stanchion Welded to
Stanchion 5" (127 mm)
Concrete Concrete Steel Plate
Concrete
CMUCMU
Wall Wall
Concrete,
Wood or Steel
Surface Mount
2-1/2" (63.5 mm) or 5" (127 mm)
3" (76.2 mm) Core Steel Plate
Drilled Hole in Slab
1-1/2" (38.1 mm) 1-1/2" 1-1/2" (38.1 mm)

(38.1 mm)
Powder Painted Steel
Stanchion 4" (101.6 mm) Powder Painted Steel
Steel Stanchion to 6" (152.4 mm) Minimum Stanchion @ Center of Steel Stanchion
Embedded in Embedment in Slab Cell 15" (381 mm) 5" (127 mm) Weld
Concrete Minimum Embedment Steel Base Plate
Anchor Bolt
Solid Concrete Slab Moisture Barrier
Concrete Cell Grout Gasket
#3 Bar
CMU Block Wall
1/4"
(6.3 mm)
Earth
Joint
2-1/2" (63.5 mm) or 3" (76.2 mm)
Core Drilled Hole with Expansion
Cement to Set Post

CRL AWS Rectangular Aluminum Windscreen System

• 2" x 2-5/8" (50.8 x 66.7 mm) Rectangular
Aluminum Windscreen System
Post Cap
• Great for Pools, Balconies, Fencing,
Steps, Slopes, and Many Other Options End Posts
• Low Maintenance With All Components

Specially Coated to Prevent Corrosion 72" (1829 mm)
1/4" to 1/2"
• Adapts Easily to a Wide Variety of (6 to 12 mm) Maximum Post
Spacing
Tempered Glass
Terrain and Wall Designs Center Posts
• Provides a Virtually Unobstructed View 2" x 2-5/8"

Bottom Rail (50.8 x 66.7 mm)
• Will Accommodate 1/4" (6 mm), (Optional) Post with Vinyl
3/8" (10 mm), and 1/2" (12 mm) 1/4" to 1/2"
Wet Set Glazing (6 to 12 mm)
90 Degree
Tempered Glass
• Seven Standard Colors Available in Corner Post
Bottom Rail
Stock. Custom Colors Also Available (Optional)
• 36" (914 mm), 48" (1219 mm),
60" (1524 mm), and 72" (1829 mm)
Standard Heights in Stock.
135 Degree Post
Custom Heights Also Available
• Glazing Vinyl Available in Black Color
• Designed and Engineered to Meet or MANUFACTURED IN THE USA
BY C.R. LAURENCE
Exceed Building Codes An ISO9001:2000 Certified Company
NOTE: Not for use as a guard rail.
Post Cap
2" x 2-5/8" (50.8 x 66.7 mm)

Rectangular Post Extrusion
Glazing Vinyl
1/4" to 3/8" (6 to 10 mm)

Tempered Glass with Vinyl;
1/2" (12 mm) Tempered
Glass Wet Glaze Only
Pocket Filler
Glazing Vinyl
Glass Bottom Rail
C.M.U. Block
Steel Stanchion
8,000 P.S.I. Non-Shrink,
Non-Metallic Grout

CRL AWS 2" x 2-5/8" Standard Center Kits Include: Standard End Kits Include:
Rectangular 180 Degree

Center or End Post Kits
• Standard Kits Include Post,
Top Cap, and Vinyl
• Seven Standard Colors, With Custom
Colors Available Upon Request
• Accommodates 1/4" to 3/8" (6 to
10 mm) Glass Dry Glazed With Vinyl
• Accommodates 1/2" (12 mm) Glass 2-5/8"
End Post (66.7 mm) 9/16" (14.3 mm)
Wet Glazed Filler Pocket Width
These Kits can be used to fabricate posts used at the
end of a barrier, or to join two panels at 180 degrees. MANUFACTURED IN THE USA
BY C.R. LAURENCE 2"
They can accommodate 1/4" to 3/8" (6 to 10 mm) panels (50.8 mm)
when dry glazed with vinyl, and 1/2" (12 mm) panels
when wet glazed. They are available in seven standard Aluminum
colors, with custom colors available on request. NOTE: Glazing Post
Maximum Post Spacing is 72" (1829 mm) on center. Vinyl
Maximum square footage should not exceed 24 square 13/16"
(20.6 mm)
feet per panel.
STANDARD COLORS
CENTER POST KITS END POST KITS
CAT. NO.* HEIGHT CAT. NO.* HEIGHT
S36CK 36" (914 mm) S36EK 36" (914 mm) Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
S48CK 48" (1219 mm) S48EK 48" (1219 mm)
S60CK 60" (1524 mm) S60EK 60" (1524 mm) Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is
S72CK 72" (1829 mm) S72EK 72" (1829 mm)
Minimum order: 1 each. * Specify color when ordering. Minimum order: 1 each. * Specify color when ordering. Additional Color Options - CRL has over 250 standard quick turn custom color
Note: Steel Stanchions sold separately, see pages R758-R759. Note: Steel Stanchions sold separately, see pages R758-R759. options with the ability to color match as well.
CRL AWS 2" x 2-5/8"

Rectangular 180 Degree
Center or End Post Only
(66.7 mm)
• Low Maintenance With Special
Coating to Prevent Corrosion
• Four Standard Post Heights, Plus a Stock 2"
9/16"
(14.3 mm)
(50.8 mm)
Length So You Can Cut Custom Heights
• Seven Stock Colors, With Custom Colors
Also Available
13/16"
(20.6 mm)
RECTANGULAR CENTER OR END POSTS
STANDARD COLORS
CAT. NO.* HEIGHT/LENGTH MANUFACTURED IN THE USA
BY C.R. LAURENCE
SP36 36" (914 mm) An ISO9001:2000 Certified Company
SP48 48" (1219 mm)

SP60 60" (1524 mm) Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
SP72 72" (1829 mm)
Colors shown are representative only and may vary slightly from actual gloss, color and texture.
SP194 241" (6.12 m)# If color match is critical, please contact Technical Sales for additional information.
Minimum order: 1 each. * Specify color when ordering.
# Must ship common carrier. End Post Filler Inserts sold Additional Color Options - CRL has over 250 quick turn custom color
separately see page R761. options with the ability to color match as well.

CRL AWS 2" x 2-5/8" Rectangular Standard Corner Kits Include:
90 Degree Corner Post Kits

• Standard Kits Include Post, Top Cap, and Vinyl
Available Upon Request
• Accommodates 1/4" to 3/8" (6 to 10 mm)
Glass Dry Glazed With Vinyl
• Accommodates 1/2" (12 mm) Glass Glazing
Vinyl
Wet Glazed
2-5/8"
(66.7 mm)
These Kits are for fabricating posts used 9/16" (14.3 mm)
to join two panels at 90 degrees. They can Pocket Width
accommodate 1/4" to 3/8" (6 to 10 mm) panels BY C.R. LAURENCE
when dry glazed with vinyl, and 1/2" (12 mm)

2-5/8"
panels when wet glazed. They are available (66.7 mm)
in seven standard colors, with custom colors 2"
available on request. NOTE: Maximum Post (50.8 mm)
Spacing is 72" (1829 mm) on center. Maximum
square footage should not exceed 24 square
feet per panel. Glazing
Vinyl 13/16"
(20.6 mm)
CORNER POST KITS
CAT. NO.* HEIGHT STANDARD COLORS
S36CRK 36" (914 mm)
S48CRK 48" (1219 mm)
S60CRK 60" (1524 mm) Additional Color Options - CRL has
S72CRK 72" (1829 mm) over 250 standard quick turn custom Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
Matte
Gloss Gloss Gloss Gloss Matte Gloss
Minimum order: 1 each. * Specify color when ordering. color options with the ability to color Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match
Note: Steel Stanchions sold separately, see pages R758-R759. match as well. is critical, please contact Technical Sales for additional information.
CRL AWS 2" x 2-5/8" Rectangular

90 Degree Corner Post Only
(66.7 mm)
• Low Maintenance With Special 9/16" (14.3 mm)
Coating to Prevent Corrosion Pocket Width
• Four Standard Post Heights, Plus a Stock

2-5/8"
Length So You Can Cut Custom Heights (66.7 mm) 2"
(50.8 mm)
• Seven Stock Colors, With Custom
Colors Also Available
13/16"
(20.6 mm)
RECTANGULAR CORNER POSTS STANDARD COLORS
CAT. NO.* HEIGHT/LENGTH BY C.R. LAURENCE
SP936 36" (914 mm)

SP960 60" (1524 mm) Gloss Gloss Gloss Gloss Matte Gloss Matte
SP972 72" (1829 mm) Colors shown are representative only and may vary slightly from actual gloss, color and texture.
If color match is critical, please contact Technical Sales for additional information.
SP9194 241" (6.12 m)#
Minimum order: 1 each. * Specify color when ordering. Additional Color Options - CRL has over 250 quick turn custom color
# Must ship common carrier. options with the ability to color match as well.

CRL AWS 2" x 2-3/8" Rectangular Standard 135 Degree Kits Include:
135 Degree Post Kits new

Glass Dry Glazed With Vinyl 2-3/8"
(60.3 mm)
• Accommodates 1/2" (12 mm) Glass
Wet Glazed
These Kits are for fabricating posts used to
13/16"
join two panels at 135 degrees. They can MANUFACTURED IN THE USA (20.6 mm)
BY C.R. LAURENCE
accommodate 1/4" to 3/8" (6 to 10 mm) panels An ISO9001:2000 Certified Company 2"
when dry glazed with vinyl, and 1/2" (12 mm) (50.8 mm)
panels when wet glazed. They are available in
seven standard colors, with custom colors 9/16" (14.3 mm)
Pocket Width
available on request. NOTE: Maximum Post
Spacing is 72" (1829 mm) on center. Maximum
square footage should not exceed 24 square 2"
(50.8 mm)
feet per panel.
2-3/8"
(60.3 mm)
RECTANGULAR 135 DEGREE POST KITS STANDARD COLORS

CAT. NO.* HEIGHT
S365K 36" (914 mm)
S485K 48" (1219 mm)
S605K 60" (1524 mm) Additional Color Options - CRL has Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
S725K 72" (1829 mm) over 250 standard quick turn custom Gloss Gloss Gloss Gloss Matte Gloss Matte
Minimum order: 1 each. * Specify color when ordering. color options with the ability to color Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is
Note: Steel Stanchions sold separately, see pages R758-R759. match as well. critical, please contact Technical Sales for additional information.
CRL AWS 2" x 2-3/8" Rectangular

135 Degree Posts Only
2-3/8"
(60.3 mm) 9/16" (14.3 mm)
• Ready to Install Pocket Width
• Low Maintenance With Special Coating 13/16"
to Prevent Corrosion (20.6 mm)
2"
• Four Standard Post Heights, Plus a Stock (50.8 mm)

new 2"
(50.8 mm)
2-3/8"
(60.3 mm)
STANDARD COLORS
RECTANGULAR 135 DEGREE POSTS
SP536 36" (914 mm)

SP560 60" (1524 mm) Gloss Gloss Gloss Gloss Matte Gloss Matte
SP572 72" (1829 mm) Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is
SP5241 241" (6.12 m)#
Minimum order: 1 each. * Specify color when ordering. Additional Color Options - CRL has over 250 quick turn custom color options with

CRL AWS Round Aluminum Windscreen System

• 3" (76.2 mm) Diameter Aluminum
Windscreen System for Pools,
Post Cap
Balconies, Fencing, Steps,Slopes,
and Many Other Options
• Low Maintenance With All Components
End Posts
Specially Coated to Prevent Corrosion 72" (1829 mm)
Maximum
• Adapts Easily to a Wide Variety of 1/4" to 1/2" Post Spacing
Terrain and Wall Designs (6 to 12 mm)
Tempered Glass
• Provides a Virtually 3" (76.2 mm)
Unobstructed View Post with Vinyl
Bottom Rail
(Optional) 1/4" to 1/2"
• Will Accommodate 1/4" (6 mm), (6 to 12 mm) Center Posts
3/8" (10 mm), and 1/2" (12 mm) Tempered Glass
Wet Set Glazing Bottom Rail
(Optional)
• Seven Standard Colors Available in
Stock. Custom Colors Also Available
• 36" (914 mm), 48" (1219 mm), 60"
(1524 mm), and 72" (1829 mm) 90 Degree Posts
Standard Heights in Stock.
Custom Heights Also Available
• Glazing Vinyl Available in Black Color
• Designed and Engineered to Meet or
Exceed Building Codes MANUFACTURED IN THE USA
BY C.R. LAURENCE
NOTE: Not for use as a guard rail. 135 Degree Posts

Post Cap
3" (76.2 mm)

Diameter Post Extrusion
Glazing Vinyl
1/4" to 3/8" (6 to 10 mm)

Tempered Glass with Vinyl;
1/2" (12 mm) Tempered
Glass Wet Glazed Only
Pocket Filler
Glazing Vinyl
Glass Bottom Rail
C.M.U. Block
Steel Stanchion
8,000 P.S.I. Non-Shrink,
Non-Metallic Grout

CRL AWS 3" Diameter Standard Center Kits Include: Standard End Kits Include:
Round 180 Degree

Center or End Post Kits
• Standard Kits Include Post,
Top Cap, and Vinyl
13/16"
• Accommodates 1/4" to 3/8" (6 to (20.6 mm)
10 mm) Glass Dry Glazed With Vinyl

Wet Glazed End Post
Filler 9/16" (14.3 mm)
These Kits can be used to fabricate posts used Pocket Width
at the end of a barrier, or to join two panels at 180 MANUFACTURED IN THE USA
degrees. They can accommodate 1/4" to 3/8" (6 to BY C.R. LAURENCE 3"

(76.2 mm)
10 mm) panels when dry glazed with vinyl, and 1/2"
(12 mm) panels when wet glazed. They are available Aluminum
in seven standard colors, with custom colors available Post
Glazing
on request. NOTE: Maximum Post Spacing is 72" Vinyl
(1829 mm) on center. Maximum square footage
should not exceed 24 square feet per panel.
STANDARD COLORS
ROUND CENTER POST KITS ROUND END POST KITS

CAT. NO.* LENGTH CAT. NO.* LENGTH
R36CK 36" (914 mm) R36EK 36" (914 mm) Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
R48CK 48" (1219 mm) R48EK 48" (1219 mm)
Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is critical,
R60CK 60" (1524 mm) R60EK 60" (1524 mm) please contact Technical Sales for additional information.
R72CK 72" (1829 mm) R72EK 72" (1829 mm)
Minimum order: 1 each.* Specify color when ordering. Minimum order: 1 each.* Specify color when ordering.
Note: Steel Stanchions sold separately, see pages R758-R759. Note: Steel Stanchions sold separately, see pages R758-R759. the ability to color match as well.
CRL AWS 3" Diameter

Round 180 Degree
Center or End Post Only 3"
(76.2 mm)

13/16"
• Seven Stock Colors, With Custom Colors (20.6 mm)
Also Available
STANDARD COLORS 9/16" (14.3 mm)

ROUND CENTER OR END POSTS
CAT. NO.* HEIGHT/LENGTH MANUFACTURED IN THE USA
BY C.R. LAURENCE
RP36 36" (914 mm) An ISO9001:2000 Certified Company
RP48 48" (1219 mm) Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
RP60 60" (1524 mm) Gloss Gloss Gloss Gloss Matte Gloss Matte
RP72 72" (1829 mm) Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is critical,
RP194 please contact Technical Sales for additional information.
241" (6.12 m)#
Minimum order: 1 each. *Specify color when ordering.
# Must ship common carrier. End Post Filler Inserts sold Additional Color Options - CRL has over 250 quick turn custom color options with
separately see page R761. the ability to color match as well.

CRL AWS 3" Diameter Round Standard Corner Kits Include:
90 Degree Corner Post Kits

• Accommodates 1/2" (12 mm) Glass Glazing
Vinyl
Wet Glazed
These Kits are for fabricating posts used 9/16" (14.3 mm)
to join two panels at 90 degrees. They can Pocket Width
accommodate 1/4" to 3/8" (6 to 10 mm) MANUFACTURED IN THE USA
BY C.R. LAURENCE 3"
panels when dry glazed with vinyl, and 1/2" An ISO9001:2000 Certified Company
(76.2 mm)
(12 mm) panels when wet glazed. They Aluminum
are available in seven standard colors, with Post
custom colors available on request. NOTE:
Maximum Post Spacing is 72" (1829 mm)
on center. Maximum square footage should
not exceed 24 square feet per panel. 13/16"
(20.6 mm)
ROUND CORNER POST KITS STANDARD COLORS

CAT. NO.* LENGTH
R36CRK 36" (914 mm)
R48CRK 48" (1219 mm)
R60CRK 60" (1524 mm) Additional Color Options - CRL has Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
R72CRK 72" (1829 mm) over 250 standard quick turn custom Gloss Gloss Gloss Gloss Matte Gloss Matte
Minimum order: 1 each.* Specify color when ordering. color options with the ability to color Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is critical,
Note: Steel Stanchions sold separately, see pages R758-R759 match as well. please contact Technical Sales for additional information.
CRL AWS 3" Diameter Round

90 Degree Corner Post Only 9/16"
(14.3 mm)
Coating to Prevent Corrosion 3"
(76.2 mm)
13/16"
(20.6 mm)
STANDARD COLORS
ROUND CORNER POSTS
RP936 36" (914 mm)

please contact Technical Sales for additional information.
RP9194 241" (6.12 m)#
Minimum order: 1 each. *Specify color when ordering. Additional Color Options - CRL has over 250 quick turn custom color options with

CRL AWS 3" Diameter Round Standard 135 Degree Kits Include:
135 Degree Post Kits new

Wet Glazed Glazing
Vinyl 9/16" (14.3 mm)
These Kits are for fabricating posts used to Pocket Width
join two panels at 135 degrees. They can 13/16"
accommodate 1/4" to 3/8" (6 to 10 mm) MANUFACTURED IN THE USA
BY C.R. LAURENCE (20.6 mm)
panels when dry glazed with vinyl, and 1/2" An ISO9001:2000 Certified Company
(12 mm) panels when wet glazed. They are

available in seven standard colors, with 3"
(76.2 mm) Aluminum
custom colors available on request. NOTE: Post
Maximum Post Spacing is 72" (1829 mm) on
center. Maximum square footage should not
exceed 24 square feet per panel.
ROUND 135 DEGREE POST KITS STANDARD COLORS

CAT. NO.* LENGTH
R365K 36" (914 mm)
R485K 48" (1219 mm)
R605K 60" (1524 mm) Additional Color Options - CRL has Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
R725K 72" (1829 mm) over 250 standard quick turn custom Gloss Gloss Gloss Gloss Matte Gloss Matte
Minimum order: 1 each. * Specify color when ordering.
color options with the ability to color Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is critical,
Note: Steel Stanchions sold separately, see pages R758-R759. match as well. please contact Technical Sales for additional information.
CRL AWS 3" Diameter Round

135 Degree Post Only
9/16"

Coating to Prevent Corrosion 13/16"
(20.6 mm)
Length So You Can Cut Custom Heights 3"
(76.2 mm)
• Seven Stock Colors, With Custom Colors
Also Available
new
STANDARD COLORS
ROUND 135 DEGREE POSTS
RP536 36" (914 mm)

RP5241 241" (6.12 m)# please contact Technical Sales for additional information.
Minimum order: 1 each. *Specify color when ordering. Additional Color Options - CRL has over 250 quick turn custom color options with

CRL AWS Core Mount Stanchions

• Black Powder Coated and Galvanized AWS Core Mount Stanchions are available in Grade 50 Galvanized Steel
or 300 Stainless Steel for use with our AWS Windscreen Posts. Stanchions
to Prevent Corrosion are recommended to be set into 8,000 psi concrete with a minimum of 4"
• Available in Four Different Sizes for (101.6 mm) embedment depth for a concrete slab. If installing the Stanchion
into a block wall, allow a 15" (381 mm) minimum embedment depth. Sold
Round or Rectangular Windscreen Posts six per package (individual Stanchions are not available).
• Available in Stainless Steel
for Coastal Installations CAT. NO. DESCRIPTION HEIGHT FOR POST HEIGHT THICKNESS
PST1 Grade 50 Steel Stanchion 18" (457 mm) Up to 36" (914 mm) 1/8" (3.2 mm)
BY C.R. LAURENCE
PST4 300 Grade Stainless 30" (762 mm) Up to 72" (1829 mm) 1/8" (3.2 mm)
Steel Stanchion
PST6 Grade 50 Steel Stanchion 42" (1067 mm) Special Conditions 1/4" (6.3 mm)
Minimum order: 1 pack. For Posts less than 30" (762 mm), the Stanchion can be cut to size.
• Fit All of Our Rectangular or Round

Aluminum Posts
Core Mount Installation Core Mount Installation
for a Concrete Slab for CMU Block Walls
Aluminum Aluminum
Windscreen Windscreen
Post Post
90 Degree Corner Posts 135 Degree Posts Center Posts
Steel
Stanchion
Steel
Concrete Stanchion Concrete
CMU Wall
2-1/2" (63.5 mm) or
3" (76.2 mm) Core
Drilled Hole in Slab 90 Degree Corner Posts 135 Degree Posts Center Posts
CRL Kwixset® Expanding Cement

• For Interior and Exterior
Applications
• Fast Setting, Will Not Shrink
or Crack
CRL Kwixset® is gray, hydraulic

type cement that expands as it sets.
When mixed with water it pours into
place smoothly. Set time is within 15
to 20 minutes, and when fully cured
it develops compression strength in CAT. NO. WEIGHT
excess of 8000 pounds per square
KWX25 25 Pound (11.3 kg)
inch. Perfect product to set railings,
brackets, and other fixtures because
Minimum order: 1 each. NOTE: Kwixset® can be used
it will not shrink, crack or dry out. in temperatures as low as 40˚F (4˚C).

CRL AWS new

Welded Steel STEEL STANCHIONS FOR POST HEIGHTS UP TO 24" (610 MM)
CAT. NO.* STANCHION HEIGHT
Surface Mount PSB1A 12" (305 mm) For 180 Degree Round or Rectangular Center or End Posts
DESCRIPTION
Stanchions PSB2A
PSB3A
12" (305 mm)
12" (305 mm)
For 90 Degree Round Corner Posts
For 90 Degree Rectangular Corner Posts
PSB4A 12" (305 mm) For 135 Degree Round Center Posts
• Mounting Bases Available PSB5A 12" (305 mm) For 135 Degree Rectangular Center Posts
in Seven Standard Colors BPG1BL ----- Replacement Moisture Barrier Gasket
to Match AWS Posts Minimum order: 1 each. *Specify powder coat color when ordering.
Base measures 5" x 5" (127 x 127 mm) and is 3/8" (9.5 mm) thick.
• 90,135, and 180 Degree STEEL STANCHIONS FOR POST HEIGHTS UP TO 48" (1219 MM)
Bases are Designed for CAT. NO.* STANCHION HEIGHT DESCRIPTION
Concrete or Steel PSB1B 30" (762 mm) For 180 Degree Round or Rectangular Center or End Posts
PSB2B 30" (762 mm) For 90 Degree Round Corner Posts
Installations PSB3B 30" (762 mm) For 90 Degree Rectangular Corner Posts
AWS Welded Grade 50 Galvanized Steel PSB4B 30" (762 mm) For 135 Degree Round Center Posts
Stanchions are for use on surface mount PSB5B 30" (762 mm) For 135 Degree Rectangular Center Posts
applications with our Aluminum Windscreen BPG1BL ----- Replacement Moisture Barrier Gasket
Posts. Stanchions are welded to a steel Minimum order: 1 each. *Specify powder coat color when ordering.
base plate, and then powder coated to
match our AWS Posts and Bottom Rails. STEEL STANCHIONS FOR POST HEIGHTS UP TO 72" (1829 MM)
Stanchions are available in different sizes CAT. NO.* STANCHION HEIGHT DESCRIPTION
based on the height of the post, and are
PSB1C 30" (762 mm) For 180 Degree Round or Rectangular Center or End Posts
sold individually. Base Plates in seven PSB2C 30" (762 mm) For 90 Degree Round Corner Posts
standard colors are available, with custom PSB3C 30" (762 mm) For 90 Degree Rectangular Corner Posts
colors available on special order. One PSB4C 30" (762 mm) For 135 Degree Round Center Posts
each Moisture Barrier Gasket is included PSB5C 30" (762 mm) For 135 Degree Rectangular Center Posts
with each Stanchion. BPG2BL ----- Replacement Moisture Barrier Gasket
Minimum order: 1 each. *Specify powder coat color when ordering.
Aluminum
Windscreen MANUFACTURED IN THE USA
BY C.R. LAURENCE
Post An ISO9001:2000 Certified Company
STANDARD COLORS
Steel Stanchion
Welded to Steel Plate
Concrete, Additional Color Options Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
Wood or CRL has over 250 quick turn Gloss Gloss Gloss Gloss Matte Gloss Matte
Steel custom color options, with the Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is critical,
ability to color match as well. please contact Technical Sales for additional information.

CRL AWS Rectangular Post Caps MANUFACTURED IN THE USA

BY C.R. LAURENCE
• Available in Seven Standard Colors

Rectangular Post Top Caps slip easily into our Post Extrusions.
Use our Cat. No. 95C Silicone (see page R763) to secure and fasten
Caps to Posts. Standard colors are shown on page R759. Additional
color options include over 250 quick turn custom color options, as
well as the ability to color match to your requirements.
For 180 Degree Center For 135 Degree Posts For 90 Degree
Posts or End Posts Corner Posts
CAT. NO. COLOR CAT. NO. COLOR CAT. NO. COLOR

PC1SW Sky White PC135SW Sky White PC9SW Sky White
PC1S0W Oyster White PC135S0W Oyster White PC9S0W Oyster White
PC1SAGY Agate Gray PC135SAGY Agate Gray PC9SAGY Agate Gray
PC1SBGY Beige Gray PC135SBGY Beige Gray PC9SBGY Beige Gray
PC1SBL Matte Black PC135SBL Matte Black PC9SBL Matte Black
PC1SBRZ Matte Bronze PC135SBRZ Matte Bronze PC9SBRZ Matte Bronze
PC1SGRN Forest Green PC135SGRN Forest Green PC9SGRN Forest Green
Minimum order: 1 each. Minimum order: 1 each. Minimum order: 1 each.
CRL AWS Round Post Caps MANUFACTURED IN THE USA

BY C.R. LAURENCE
• Available in Seven Standard Colors

Round Post Top Caps slip easily into our Post Extrusions.
Use our Cat. No. 95C Silicone (see page R763) to secure and fasten
Caps to Posts. Standard colors are shown on page R759. Additional
color options include over 250 quick turn custom color options, as
well as the ability to color match to your requirements.
For 180 Degree Center For 135 Degree Posts For 90 Degree Corner
Posts or End Posts Posts
CAT. NO. COLOR CAT. NO. COLOR CAT. NO. COLOR

PC1RW Sky White PC135RW Sky White PC9RW Sky White
PC1R0W Oyster White PC135R0W Oyster White PC9R0W Oyster White
PC1RAGY Agate Gray PC135RAGY Agate Gray PC9RAGY Agate Gray
PC1RBGY Beige Gray PC135RBGY Beige Gray PC9RBGY Beige Gray
PC1RBL Matte Black PC135RBL Matte Black PC9RBL Matte Black
PC1RBRZ Matte Bronze PC135RBRZ Matte Bronze PC9RBRZ Matte Bronze
PC1RGRN Forest Green PC135RGRN Forest Green PC9RGRN Forest Green
Minimum order: 1 each. Minimum order: 1 each. Minimum order: 1 each.

CRL AWS Windscreen

Post Pocket Fillers
• Ready to Snap Into Glass Pocket 5/8"
(15.9 mm)
• Low Maintenance, With Special
Coating to Prevent Corrosion 7/16"
MANUFACTURED IN THE USA (11.1 mm)
• Seven Standard Colors to Match Posts BY C.R. LAURENCE
CAT. NO.* LENGTH CRL AWS Windscreen Post Pocket Fillers are designed
to be snapped into the glass pocket of the Windscreen
PF36 36" (914 mm)
Post where glass will not be used. No tools or adhesives
PF48 48" (1219 mm)
PF60 60" (1524 mm) are required, and they can be removed to reconfigure post
PF72 72" (1829 mm) layouts if required. All Post Pocket Fillers are low
PF194 241" (6.12 m)# maintenance, with a special coating to prevent corrosion.
Minimum order: 1 each. *Specify powder coat color when ordering. Fillers are available in the same seven standard colors as
See page R759 for color chart. # Must ship common carrier.
our Windscreen Posts. Custom colors are also available.
CRL AWS Rigid Glazing Vinyl 5/8"

(15.9 mm)
• Black Color Rigid Push-In Glazing

Vinyl for Use With Aluminum 3/4"
Windscreen Posts and Bottom Rails (19 mm)
• Designed to Accommodate 1/4" MANUFACTURED IN THE USA
to 3/8" (6 to 10 mm) Tempered Glazing BY C.R. LAURENCE

7/16" (11.1 mm)
CAT. NO. LENGTH

GV36BL 36" (914 mm) AWS Rigid Glazing Vinyl is used to dry glaze 1/4"
GV48BL 48" (1219 mm) to 3/8" (6 to 10 mm) tempered glass into CRL AWS
GV60BL 60" (1524 mm) Windscreen System Posts and Bottom Rails.
GV72BL 72" (1829 mm) Available in five different lengths, the Vinyl has an
GV120BL 120" (3.05 m)#
overall width of 5/8" (15.9 mm).
Minimum order: 1 each. # Must ship common carrier.
CRL AWS Bottom Rail Kits

With Rigid Glazing Vinyl
• Low Maintenance, With a Special
• Designed to Accommodate 1/4" and
3/8" (6 and 10 mm) Tempered Glazing Included Vinyl is only for use with 1/4" to 3/8"
(6 to 10 mm) tempered glazing. 1/2" (12 mm)
• Seven Standard Colors, With Custom MANUFACTURED IN THE USA
BY C.R. LAURENCE
tempered glass must be wet glazed.
Colors Also Available An ISO9001:2000 Certified Company
AWS Bottom Rails are designed Bottom

CAT. NO.* LENGTH Rail
to be mounted to a substrate using
BR36K 36" (914 mm)
Cat. No. 95C Silicone (see page
BR48K 48" (1219 mm)
BR60K 60" (1524 mm) R763). All AWS Bottom Rails have a 1" CRL 95C
special chromate coating to prevent (25.4 mm) Silicone
BR72K 72" (1829 mm)
BR194 241" (6.12 m)# corrosion, and are powder coated in
Minimum order: 1 each. *Specify powder coat color when ordering. the stock colors to match our
See page R759 for color chart. # Must ship common carrier. 1-5/16"
Windscreen Posts. Kits include a (33.3 mm)
length of Rigid Glazing Vinyl.

CRL Intermediate Bottom CRL Standard Bottom

Glass Rail Rail Filler
• Bottom Rail Designed to
MANUFACTURED IN THE USA MANUFACTURED IN THE USA
BY C.R. LAURENCE
An ISO9001:2000 Certified Company • Snaps in to Conceal the BY C.R. LAURENCE
Accommodate 1/4" to 1/2" Underside of Bottom Rails

(6 to 12 mm) Tempered Glass and Create a Flush Look
• Seven Standard Colors • Seven Standard Colors
5/8" (15.9 mm)
Pocket Depth
1-1/2"
(38.1 mm)
1-3/4"
(44.5 mm)
1-5/8"
(41.3 mm)

BRGLSW Sky White BRF241W Sky White CRL Standard Bottom
Our Intermediate Bottom Rail is BRF241OW
BRGLSOW Oyster White Oyster White
designed to accommodate 1/4" to Rail Filler is designed to
BRGLSAGY Agate Gray BRF241AGY Agate Gray
3/8" (6 to 10 mm) tempered glass BRF241BGY finish off the underside of
BRGLSBGY Beige Gray Beige Gray
with vinyl, 1/2" (12 mm) glazing if BRF241BL Matte Black Bottom Rail to create a
BRGLSBL Matte Black
wet glazed. Stock lengths BRF241BRZ Matte Bronze flush look. Stock lengths
BRGLSBRZ Matte Bronze
BRGLSGRN measure 20'-1" (6.12 m). BRF241GRN Forest Green measure 20'-1" (6.12 m).
Forest Green
CRL Rail Connecting Blocks

• Designed for Use When
Installing Bottom Rails MANUFACTURED IN THE USA
BY C.R. LAURENCE
• Three Standard Lengths Available

Use CRL Rail Connecting Blocks to connect Bottom
Rails to vertical posts. Screw Blocks into index grooves
on post using Cat. No. RCBS Rail Connecting Block
Screws. Miter cut the 12" or 241" lengths when building RCBS
angles and slopes. All Connecting Blocks are extruded Screw
aluminum with a weather resistant chromate finish. 1"
(25.4 mm)
CAT. NO. LENGTH Connecting
RCB2 1" (25.4 mm) Block
RCB212 12" (305 mm)
RCB2241 241" (6.12 m)# 1-1/2"
Minimum order: 1 each. # Must ship common carrier. (38.1 mm)
CRL Bottom Rigid

Glazing Vinyl
• Rigid Glazing Vinyl is Designed to Snap 9/16"
(14.3 mm)
in Before the Glass is Installed
Bottom Rail 3/4"
• Two Sizes for Use With 1/4" or 3/8" (19 mm)
(6 or 10 mm) Thick Tempered Glass
CRL Bottom Rigid Vinyl comes in two sizes to hold 1/4" or 3/8"
(6 or 10 mm) glass. When installing Rigid Vinyl, snap it into place 14BV Bottom Vinyl for 1/4" (6 mm) Thick Glass #
38BV Bottom Vinyl for 3/8" (10 mm) Thick Glass #
before you install the glass. Stock lengths are 12 feet (3.66 meters).
Minimum order: 1 each. # Must ship common carrier.
All shapes can be combined for quantity pricing. A Packing Charge will be added to orders of fewer than 5 combined lengths.

CRL 95C Silicone Building Sealant

• Excellent Primerless Adhesion to Most
Common Construction Substrates
• ±50% Joint Width Movement
Available in These Colors
• Long Tooling Time, All Temperature
Gunning, Plus Each Tube has an 10.3 Fl. Oz. (305 ml)
Innovative Screw-On Nozzle Cartridges; 30 Cartridges
Per Case; 1440 Black Dark Bronze Gray Limestone Precast
• Custom Colors Available Cartridges Per Pallet White
CRL 95C Silicone is a one part, low modulus, neutral cure formulation that cures to a durable and
flexible silicone rubber building joint seal. It can accommodate ±50 percent joint movement in properly
designed joints. Designed for sealing expansion and control joints in precast concrete panels and
metal curtainwalls; non-structural glazing of glass, metal, and plastic, as well as waterproofing CAT. NO. FINISH
applications, including perimeter sealing of doors and windows. CRL 95C forms a durable, flexible, 95CBL Black
watertight bond with most building materials in any combination of glass, ceramics, plastics, stone, 95CDBRZ Dark Bronze
95CGRY Gray
masonry, wood, steel, anodized and mill-finished aluminum, and painted surfaces. CRL 95C can be
95CL Limestone
applied at outdoor temperatures as low as -20°F (-29°C), provided that surfaces are clean, dry, and Precast White
95CW
frost-free, or on surfaces as high as 100°F (38°C). Cured sealant will perform at cold temperatures
Minimum order: 1 each. Colors can be combined for quantity
down to -40°F (-40°C), or at high temperatures up to 350°F (177°C). pricing. Also available in 2 and 4.5 gallon pails.
CRL Lacquer Blend Touch-Up Paint

• Matches Seven Standard CRL Powder
Paint Colors (see page R759)
• Used to Cover Scratches or Bare
Metal Ends CAT. NO. FINISH
SP8W Sky White
SP80W Oyster White
SP8AGY Agate Gray
Use CRL Lacquer Blend Touch-Up Paint to cover SP8BGY Beige Gray
scratches or bare metal ends. It can be applied at the SP8BL Matte Black
job site, thus eliminating the need for costly dismantling SP8BRZ Matte Bronze
and reassembling of the affected parts. Touch-Up Paint SP8GRN Forest Green
is a cost and labor saver. 12 ounces (340 g) per can. Minimum order: 1 each. Colors can be combined for quantity pricing.
CRL Glass Pocket Setting Block

for Windscreen Posts
3/4"
• Can Be Easily Cut (19 mm)
to Any Length
• Will Not Compress
1/2"
Under Glass Weight (12.7 mm)
This Windscreen Post Setting Block fits into the glass pocket to support
the glass panel at the height you determine. It is made of a rigid UHMW
plastic composite that won't compress under the weight of the glass, helping
to maintain an even sight line. You can trim it to any length you require. Setting Block is Cut
to Required Length
CAT. NO. THICKNESS WIDTH LENGTH and Inserted in
Glass Pocket
WPSB1 1/2" (12.7 mm) 3/4" (19 mm) 24" (610 mm)

A
C.R. Laurence Co.
AWS Quote/Order
Request Form

Contact Fax #
Job Name Date
in covering the details required to complete a Windscreen the following may be required to accurately order: sketches or drawings of
WINDSCREEN SYSTEM POST HEIGHT ELEVATED BOTTOM RAIL GLASS THICKNESS

(OPTIONAL)
Rectangular 2" x 2-5/8" 36" (914 mm) 1/4" (6 mm)
(50.8 x 66.7 mm) 48" (1219 mm) 20'-1" (6.12 m) Bottom Rail 3/8" (10 mm)
Round 3" (76.2 mm) 60" (1524 mm) 20'-1" (6.12 m) Bottom Rail Filler 1/2" (12 mm)
Diameter 72" (1829 mm) No Bottom Rail Other
Square 4" x 4" Other Other (Glass not supplied by CRL)
(101.6 x 101.6 mm)
SUBSTRATE COLOR
POSTS NEEDED SURFACE MOUNT BOTTOM
RAIL LENGTH (OPTIONAL) Sky White
Concrete
Ends Oyster White
90 Degree Corners Steel 36" (914 mm)
Wood Agate Gray
180 Degree Centers 48" (1219 mm)
Other Beige Gray
135 Degree Centers 60" (1524 mm)
Forest Green
FLOOR CONDITION
72" (1829 mm) Matte Black
POST ATTACHMENT
No Bottom Rail Matte Bronze
Core Mount Flat Other Clad in Polished S.S. w/Flat Cap
Fascia Mount Sloped (Degrees) Clad in Satin S.S. w/Flat Cap
Surface Mount
Special (Specify)
Other

AWS Basic Installation Guidelines

3 Core mount or surface mount the Steel Stanchions, starting 3 Once the Steel Stanchions are installed, apply CRL 95C Silicone to the
with the End and Corner Posts first.
1. 3 Then run a straight line between your End Posts and/or Corner
Posts before you set the Intermediate Posts.
2a. 3 Stanchion before mounting the Post into place.
If you are installing a Surface Mount Bottom Rail, measure and cut
to the desired size, then install the Surface Mount Bottom Rail onto
3 Be sure the Stanchions are plumb and level. the substrate using CRL 95C Silicone.
3 NOTE: When surface mounting to concrete, brick, masonry, 3 NOTE: Surface Mount Bottom Rails are optional when installing the
or stucco make sure to install the Moisture Barrier Gasket AWS System.
between the bottom plate and substrate to prevent metal
corrosion.
Post
Surface Mount
Bottom Rail
Steel
Stanchion
3 If you are installing an Elevated Bottom Rail, Rail Connecting 3 Cut Elevated Bottom Rail to length. Mount the Bottom Rail onto the
Blocks must be installed first.
2b. 3 Install the Rail Connecting Blocks onto the Post using Self
Tapping Screws Cat. No. RCBS. These Blocks are used to
2c. Blocks and secure with Cat. No. TEK1 Tek Screws.
support the Bottom Rail.

3 NOTE: Elevated Bottom Rails are optional when installing the
AWS System.
Elevated
Bottom Rail

Tek Screws
3 When installing the glass panels, make sure the rigid vinyl is installed 3 Install Post Caps with CRL 95C Silicone.
3. into the glass pocket before installing the panels.
3 Slide the glass panels down from the top of the Post. Make sure the
vinyl is lubricated to protect the vinyl from damage during installation.
4. 3 To protect the glass from debris over time, use Cat. No. TPC16
Surface Protector to seal the glass.
3 When a glass wall ends, Snap-in Pocket Fillers

are installed to conceal the exposed glazing
pockets on End Posts. Post Cap
Snap-In
Snap-In Post
Post Pocket
Pocket Filler
Filler

CRL 4" Square Windscreen Post Systems

• Heights Up to 48" (1219 mm) Tall for
Surface Mount Applications BY C.R. LAURENCE
• Seven Standard Powder Coated Colors,

Tempered Glass Dry Glazed With Vinyl
• Accommodates 1/2" (12 mm) Tempered Glass
When Wet Glazed
With seven standard colors available, and over

250 quick turn colors to choose from, CRL can
build Windscreen Systems that fit a wide variety
of environments, commercial or residential. Our
4" (101.6 mm) Square Windscreen Post Systems
are ideal for pools, outdoor dining areas, decks,
and balcony applications.
Anchor Hole
• Available Configurations Include Glazing Channel

4" (101.6 mm)
Square Post
Surface Mount
Base Plate
3-Way End
Post Post
4" (101.6 mm)

Square Post
6-1/2" (165.1 mm)

Square Base Plate
BPS112
Screws
Center 4-Way
Post Post
Glazing Channel Top Caps Post Extrusions Base Plates

CRL BARRIER SYSTEMS For Pricing on CRL Products, Call Toll Free
CRL Custom Designed Windscreen/Barrier Post System MANUFACTURED IN THE USA

BY C.R. LAURENCE
Allow CRL to Design a Custom Windscreen/Barrier

Post System for You
• Systems for Interior or Exterior • Designed for Surface or
Commercial or Residential Core Mount Applications
Applications in Heights Up to Using 1/2" (12 mm)
72" (1829 mm) Tempered Glazing
• Multiple Finish Options Include
Cladding or Powder Coating
CRL can custom design Windscreen/Barrier Post Systems that are ideal for
airports, convention centers, hotels, and outdoor dining areas. Cladded stainless
steel, brass, or powder coated finishes are available that can adapt to a wide
variety of conditions.
Glazing Pocket
Cladding
Cladding
Aluminum Post
Base Shoe
Glazing Pocket
Post Detail Base Shoe Detail

Aluminum Posts are secured by Stanchions
that are either core or surface mounted.
Base Shoe is mounted using normal Base
Shoe mounting procedures.
Plan View of Typical Post Configurations That Can Be Manufactured.

Custom Ends, 180 Degree Centers, and 90 Degree Corners Are Available
End Post Base Shoe Center Post End Post
Major Components
Base Shoe Vertical Post Surface Mount Post Stanchions Core Mount Post Stanchions Post Cap
CAT. NO. SPSC

CRL BARRIER SYSTEMS Contact CRL Tech Sales for complete planning
CRL Security Check Point Barrier Systems new

• Systems for Interior or Exterior Commercial
or Institutional Applications
• Surface Mount or Core Mount Applications
• Many Architectural Finishes to Choose From
• Custom Powder Coated Finishes Also Available
• Designed to Work With Many Different Types of Glazing
CRL can custom design Security Check Point Barrier Systems that
are ideal for airport terminals, conventions centers, hotels, schools, and
many other areas that have security concerns.
Barriers are typically fabricated using a combination of our Heavy
Glass Aluminum Base Shoe and rectangular Aluminum Posts that can
be cladded in selected architectural finishes, or powder coated in a
variety of custom colors that can adapt to a wide variety of conditions.
1/2" (12 mm) tempered glazing is recommended, but not supplied by
CRL. Glass sizing assistance is available. Units can be shipped
knocked down, or fully assembled in a crate.
2-3/4"
(69.8 mm)
BY C.R. LAURENCE
Cladding
Aluminum Post
2-7/8"
(73 mm) Glazing Pocket
Security Personnel Station Post Detail
2-5/8"
(66.7 mm)
1/2"
Top Rubber (12 mm)
Gasket Tempered
Glazing
B5S Base
Shoe with 4-3/16"
Applied (106.4 mm)
Cladding
Inspection and
Wanding Lane
Base Shoe Detail
Barriers can be configured using combinations of 180 Degree Center Posts, 135 Degree Center Posts, 90 Degree Corner Posts,
3-Way Posts, and End Posts. CRL Technical Sales will help you with plans for the Barrier System that is right for any application.
End Post Base Shoe Center Post End Post

CRL BARRIER SYSTEMS For Pricing on CRL Products, Call Toll Free
CRL Security Check Point Barrier Systems MANUFACTURED IN THE USA

BY C.R. LAURENCE
CRL Uses the Latest in Metal Bending Technology CRL Manufactured Check Point at Sky Harbor International Airport, Phoenix, Arizona
Post Configurations • Custom Post Heights Up to 72" (1.8 m) Tall
End Post 180 Degree Center Post 135 Degree Center Post 90 Degree Corner Post 3-Way Post
CAT. NO. BPE1C CAT. NO. BPC1C CAT. NO. BPH1C CAT. NO. BPL1C CAT. NO. BPT1C
2-7/8" 7-13/16"
(73 mm) (198.4 mm)
2-3/4" 2-3/4" 2-7/8"

(69.8 mm) (69.8 mm) 2-9/16"
(65.1 mm) (73 mm)
2-7/8" 2-7/8"
(73 mm) (73 mm) 2-7/8" 2-7/8"
(73 mm) (73 mm) 5-5/16"
(134.9 mm)
3-3/4" 5-5/16" 2-7/8"

(95.2 mm) (134.9 mm) (73 mm)

CRL WINDSCREEN POSTS Contact CRL Tech Sales for complete planning
CRL Windscreen Posts

Design and Function
CRL Windscreen Posts are designed to act as the prime

support for rail-free, self-supporting glass fencing. They
provide a versatile system that allows complete flexibility in
the layout of patios, swimming pools, outdoor dining areas,
and other applications. Available in a variety of lengths
and colors, Windscreen Posts offer virtually limitless
application possibilities. Fully engineered for wind loading,
our Windscreen Posts are constructed of proprietary
aluminum extrusions, and are impervious to rusting.
Available in three stock colors as well as custom painted.
Features and Benefits

• Proprietary Extruded Aluminum Posts Have Eight • Can Be Modified for Use as Light Standards
Glass Pockets With Snap-in Covers, Allowing One or Hanging Basket Standards
Post Design to be Used for Multiple Configurations • Clean, Architecturally Pleasing Look Available
• Glass Pockets are Designed to Hold Self-Supporting in a Variety of Standard and Custom Lengths
1/2" (12 mm) Tempered Glass Panels • Stock Colors Include Black or White Duracron
• Glass Can Be Installed at Any Angle of 8 to 45 Degrees, Baked Enamel, and Satin Anodized Aluminum.
and is Self-Supporting, Negating the Need for Top or Custom Colors are Also Available.
Bottom Support Rails • Strong Enough to Support Gates
• Posts are Designed to Be Installed on Steel Stanchions • Post Kits are Available With or Without
that are Wedge-Anchored to the Substrate, or 1-1/2" Steel Stanchions
(38.1 mm) Schedule 40 Pipe Set in Concrete • Three Stock Heights
Deflection Chart for 1/2" (12 mm)

Glass With Two Sided Support
0.7 Chart based on maximum height of
6 ft. (1829 mm). Consult CRL Technical
Sales for taller applications.
0.6
Base Required to be Fixed with Four 1/2"
(12 mm) Epoxy Anchor Bolts.
0.5
Glass Deflection [Inches]
Wind Pressure: 20 psf.

0.4
Point Force: 200 lbs (90 kg).
0.3 Uniform Force: 51 plf.
Allowable Deflection
0.2 Based on L/120.
Conforms to:
0.1
National Building Code 1995;
Canadian Building Code 1998;
0.0 Universal Building Code 1997;
48 54 60 66 72 International Building Code 2000.
Consult local code requirements for
Glass Span Between Posts (Inches) acceptability in your application. Satin White Black

CRL WINDSCREEN POSTS For Pricing on CRL Products, Call Toll Free
CRL Standard Windscreen Post Specifications

• Colors: Black, White, Satin Anodized 11/16" (17.5 mm) Diameter Holes
• Stock Post Heights: 8" (203 mm) Diameter
Anchoring Screws
to Steel Post
48" (1219 mm) Steel Base Plate
54" (1371 mm) 1/2" (12 mm)

Roll-In
Vinyl
61" (1549 mm) Tempered Glass
• Post Diameter: 4-1/4" (108 mm)

• Base Diameter: 8" (203 mm) Steel Mounting Base
Riveted 1-1/2" Schedule 40
• Post Weight (with Stanchion): From Galvanized Steel Pipe
Factory
48" 20 Lbs (9.1 kg) 4-1/4" (108 mm) Diameter
Aluminum Post
54" 22 Lbs (10 kg)
61" 24 Lbs (10.9 kg) Typical Section Showing Post and Glass Installation
Snap-n-Filler
1/2" (12 mm)

Tempered Glass
45 Degrees
1/2" (12 mm)
135 Degrees Tempered Glass
Glass Can Be Inserted Into Pockets at 45 Degree Incremental Angles Typical 135 Degree Corner Showing Glass Positions and Snap-In Fillers
1.9" (48.3 mm) 1.9" (48.3 mm)
1-1/2" Schedule 40
1-1/2" Schedule 40 Galvanized
Galvanized Steel Pipe
Steel Pipe 12" (305 mm) Into
Weld Ground With Grout Lock Plate.
Steel Base Plate Anchor Bolt

Cast In Place Sleeve or
Concrete Slab Concrete Slab 4" (101.6 mm) Diameter
Hole Core Drilled In Slab
1/4" (6.3 mm)
4" (101.6 mm)

Minimum
Earth Earth
12" (305 mm) Minimum
4"
(101.6 mm)
Typical Stanchion Mount Detail Typical Embedded Post Mount Detail

CRL WINDSCREEN POSTS Contact CRL Tech Sales for complete planning
CRL Windscreen Post Kits

• Designed to Accommodate 1/2" (12 mm)
Thick Tempered Glass
• Does Not Require the Support of Top or
Bottom Rails
• Kits Offered With or Without Stanchion
• All Additional Parts Included for Installation
• Individual Components Also Sold Separately
CRL Windscreen Post Kits contain all the necessary components to
create an appealing, modern architectural appearance. Windscreen
Posts work with 1/2" (12 mm) thick tempered glass, which can be
installed at variable angles, and does not require the support of top or
bottom rails. Windscreen Posts are fabricated from a proprietary
aluminum extrusion, and (when properly mounted) are strong enough
to support gates. Standard Posts are available in your choice of three
heights and three attractive colors. Kits are offered with or without a
Stanchion Post. Individual components are also sold separately (see
next page). Custom lengths and colors also available. Consult CRL
Technical Sales.
CRL Windscreen Post Kits
Include the Following:
1 each Post with 4 Fasteners (to Secure the Stanchion)
1 each Post Cap with 2 Fasteners (to Secure Cap to Post)
7 each Snap-in Fillers (Same Length as Post)
4 pieces of Glazing Vinyl (Same Length as Post)
2 each 6" (152.4 mm) Setting Blocks with 6" (152.4 mm)
Snap-in Filler (Optional)
1 each Stanchion Post with 4 Anchors and 4 Anchor Caps
(for Post Kits with Stanchions)
• Post Kits Are

Available in
Three Heights
and Three
Standard Colors
WITH STANCHION WITHOUT STANCHION POST POST MAX. GLASS HEIGHT

CAT. NO. CAT. NO. COLOR HEIGHT (FLOOR TO TOP OF GLASS)
WP148BL WP048BL Black 48" (1219 mm) 47" (1194 mm)
WP148W WP048W White 48" (1219 mm) 47" (1194 mm)
WP148SA WP048SA Satin Anodized 48" (1219 mm) 47" (1194 mm)
Satin White Black
Minimum order: 1 each. All Windscreen Post Kits can be combined for quantity pricing.

CRL WINDSCREEN POSTS For Pricing on CRL Products, Call Toll Free
CRL Windscreen Post

Replacement Parts
• Individual Parts for the Installation • Available in Three Standard
or Repair of Our Windscreen Posts Colors to Match Our Posts
Individual replacement parts are available for the CRL Windscreen

Posts shown on the opposite page. Whether you need to replace
damaged parts, or are reconfiguring an existing post layout, buying
just the parts you need is an inexpensive alternative to replacing an
entire post.
NOTE: Display Posts are available so you can show your customers
the quality, strength, and versatility of the Windscreen Posts you can
install for them. Please contact CRL Technical Sales for more
information on available sizes and colors of Display Posts.
Snap-In Filler Stanchion Post
CRL Snap-In Fillers

Available in colors to match Windscreen Posts, they are used to
conceal unused glass pockets. A maximum of seven Snap-In Fillers
can be used on any one post.
POST CAT. NO. CAT. NO. CAT. NO.

HEIGHT BLACK WHITE SATIN ANODIZED
48" (1219 mm) WP48FBL WP48FW WP48FSA
54" (1371 mm) WP54FBL WP54FW WP54FSA Top Cap Glazing Vinyl
61" (1549 mm) WP61FBL WP61FW WP61FSA
Minimum order: 1 each. Sizes and Colors can be combined for quantity pricing.
CRL Top Caps

Replacement Top Caps for Windscreen Posts are supplied
with fasteners.
CAT. NO. CAT. NO. CAT. NO.
BLACK WHITE SATIN ANODIZED Wedge Anchors and Caps Setting Blocks
WPC1BL WPC1W WPC1SA
Minimum order: 1 each. Colors can be combined for quantity pricing.
CRL Stanchion Posts CRL Glazing Vinyl

Replacement Stanchion Posts let you reuse existing posts when This black push-in Glazing Vinyl secures the vertical edges of the
post layouts are reconfigured. Can also be used to install WP0 Series 1/2" (12 mm) tempered glass panels into the Windscreen Post. Vinyl
Post Kits that do not contain Stanchions. Fasteners not included. can be trimmed to any length you require.
CAT. NO. CAT. NO. CAT. NO.

BLACK WHITE SATIN ANODIZED CAT. NO. DESCRIPTION ROLL LENGTH
WPS1BL WPS1W WPS1SA GG38100 Black Glazing Vinyl 100 Ft. (30.5 m)
Minimum order: 1 each. Colors can be combined for quantity pricing. Minimum order: 1 roll.
CRL Wedge Anchors and Caps CRL Setting Blocks

Wedge Anchors and Anchor Caps come in sets of four each. Anchor Windscreen Post Setting Blocks fit into the glass pocket to
Caps are available in colors to match standard Windscreen Posts. support the glass panel at the height you determine. They are
made of a rigid UHMW plastic composite that won’t compress
CAT. NO. DESCRIPTION QTY/SET under the weight of the glass, helping to maintain an even sight
WPA4 Wedge Anchors - only 4 line. You can trim them to any length you require.
WPAC4BL ∆ Black Caps for Wedge Anchors 4
WPAC4W ∆ White Caps for Wedge Anchors 4 CAT. NO. WIDTH HEIGHT LENGTH
WPAC4SA ∆ Satin Anodized Caps for Wedge Anchors 4 WPSB1 3/4" (19 mm) 1/2" (12.7 mm) 24" (610 mm)
Minimum order: 1 set. ∆ Colors can be combined for quantity pricing. Minimum order: 1 each.

CRL FRAMELESS WINDSCREEN SYSTEMS Contact CRL Tech Sales for complete planning
CRL Frameless Windscreen Clamps

• Gives the 'All-Glass' Frameless Look to
Wind Breaks or Pool Surrounds
new
• Core-Mounted or Side-Mounted Styles for
• Available in Brushed 316 Stainless Steel
• Custom Powder Coated Finishes Also Available
CRL Frameless Windscreen Clamps are typically used for

windscreens or pool deck surrounds. They were developed in
Australia to create a windscreen that minimizes distractions from
vertical or horizontal frame members.
Two styles are designed to be inserted in core-drilled holes in a
concrete deck, which are then filled with expanding cement. Both
come with either a 30 mm rod or 16 mm all-thread approximately
7-7/8" (200 mm) long to help support 1/2" (12 mm) tempered glass
panels. One additional style of Windscreen Clamp is designed to NOTE: CRL is an international supplier and suggests you check
mount on the face of a wall or planter box. local building codes to confirm these Frameless Windscreen
Clamps meet regulations.
CRL Three-Piece Core Mount 1-15/16"

(50 mm)
Frameless Windscreen Clamp Gasket for 3/8" or 1/2"
(10 or 12 mm) Glass
• Brushed 316 Stainless Steel

• 16 mm Rod Easily Inserts Into
Core-Drilled Hole
9-13/16"
• For 1/2" (12 mm) Tempered Glass (250 mm)
CRL Three-Piece Core Mount Frameless Windscreen Clamps are
designed for insertion in core-drilled holes in a deck or on top of a wall.
They are supplied with a 16 mm threaded rod that screws into the bottom
for additional support. 11/16"
All necessary hardware is packaged with the Clamp. Glass fabrication (17.5 mm)
requires two 3/4" (19 mm) holes per Clamp. An instruction sheet and
glass fabrication template are supplied. To secure Clamp in hole we
suggest you use Kwixset® Expanding Cement (see page R775).
Minimum order is one each. CAT. NO. AFWC3
CRL One-Piece Core Mount 1-15/16"

(50 mm)
Frameless Windscreen Clamp Gasket for 3/8" or 1/2"
(10 or 12 mm) Glass

• 30 mm Rod Easily Inserts Into
Core-Drilled Hole
9-13/16"
• For 1/2" (12 mm) Tempered Glass (250 mm)
CRL One-Piece Core Mount Frameless Windscreen Clamps are designed

for insertion in core-drilled holes in a deck or on top of a wall. They are
supplied with a 30 mm grooved stainless steel rod that fits into the bottom
of the Clamp and is secured with set screws for additional support.
All necessary hardware is packaged with the Clamp. Glass fabrication
requires two 3/4" (19 mm) holes per Clamp. An instruction sheet and glass
fabrication template are supplied. To secure Clamp in hole we suggest you
use Kwixset® Expanding Cement (see page R775). Minimum order is one each. CAT. NO. AFWC1

CRL FRAMELESS WINDSCREEN SYSTEMS For Pricing on CRL Products, Call Toll Free
CRL Two-Piece Side Mount new Gasket for 3/8" or 1/2"

Frameless Windscreen Clamp (10 or 12 mm) Glass

• For 1/2" (12 mm) Tempered Glass
• Mounts on Face of Wall or Planter Box 5-5/8"
(143 mm)
CRL Two-Piece Side Mount Frameless Windscreen Clamps are designed for
attachment to the front side of walls or planter boxes. Due to the number of
varying mounting conditions, anchors and mounting screws are not supplied.
The back plate is fabricated to accept 8 mm (5/16") flat head screws.
Glass fabrication requires two 3/4" (19 mm) holes per Clamp. An instruction 1-15/16" 1-1/4"
sheet and glass fabrication template are supplied. Minimum order is one each. (50 mm) (32 mm)
CAT. NO. AFWC2
CRL Kwixset® Expanding Cement CRL Garnish Rings for new

• Great for Securing Windscreen Clamps
Hardware in
Core-Drilled Holes CRL Garnish Rings
for Windscreen Clamps
• Expands as it Sets add the finishing touch
• Fast Setting, Will Not to your installation.
These Brushed CAT. NO. AFWC1G
Shrink or Crack Stainless Steel Garnish
CRL Kwixset® Expanding Rings easily slip over
Cement is not affected by standing the Frameless
water, making it the right cement for Windscreen Clamp, and
exterior use. When mixed with water are secured in place
it pours in place smoothly. Sets in with CRL 95C Sealant
15 to 20 minutes and develops a (see page R763).
compression strength in excess of CAT. NO. AFWC3G
8000 pounds per square inch. Can CAT. NO. WEIGHT CAT. NO. DIAMETER FITS CLAMP
be used in temperatures as low as AFWC1G 4" (102 mm) AFWC1
40°F (4°C). Mixing instructions and KWX50 50 Pound (22.7 kg) AFWC3G 4" (102 mm) AFWC3
proportions included. Minimum order: 1 each. Minimum order: 1 each.
CRL U-Channel Cap and Cap Rail Vinyl

• Secures to Top of 1/2" (12 mm) Tempered Glass H
Panels to Prevent Pinching and Edge Chipping
Stainless steel U-Channel Cap protects the edge of the glass and W
secures the glass panels together. Standard stainless alloy is 304.
Alloy 316 is available on special order.
Cap Rail Vinyl is designed to provide a protective barrier between H
the U-Channel Cap and the glass. Secures with Cat. No. 95CBL
Black Silicone (see page R763). U-Channel is not designed to be
used as a top rail for guard rail applications.
W
CAT. NO. DESCRIPTION "W" WIDTH "H" HEIGHT LENGTH
GRUC5BS10 Brushed Stainless U-Channel Cap 7/8" (22.2 mm) 1-1/2" (38.1 mm) 120" (3.05 m) #
GR5PV Black Cap Rail Vinyl 1/2" (12.7 mm) 1-3/16" (30.2 mm) 120" (3.05 m) #
Minimum order: 1 each. # 120" (3.05 m) lengths must ship common carrier. A Packing Charge will be added to orders of fewer than five lengths of either item.

CRL FRAMELESS WINDSCREEN SYSTEMS Contact CRL Tech Sales for complete planning
Typical Fabrication Guidelines for Frameless

Glass Windscreen Panels
60" (1524 mm) Maximum
Glass Panel Width
1/2" (12 mm)

Tempered Glazing
Glass Panels Not to Exceed Flat Polish All
60" x 60" (1524 x 1524 mm) Exposed Edges
60" (1524 mm) Max. Height For 18.7 PSF Rating

54" (1371 mm) Max. Height For 23.1 PSF Rating
48" (1219 mm) Max. Height For 29.2 PSF Rating 25% of the 50% of the 25% of the
Panel Width Panel Width Panel Width
2500 Min. Slab PSI

6" (152 mm) Min. Edge Distance
8" (203 mm) Min. Slab Thickness
"A" "C" "B"
"D"
Glass Fabrication:
Two 3/4" (19 mm)
Diameter Holes per Clamp
AFWC1 AND AFWC3 TOP MOUNT FABRICATION GUIDELINES
60" (1524 mm) Maximum

Glass Panel Width
1/2" (12 mm)

Tempered Glazing
Glass Panels Not to Exceed Flat Polish All
60" x 42" (1524 x 1067 mm) Exposed Edges
2500 Min.
Slab PSI
42" (1067 mm)
Recommended 25% of the 50% of the 25% of the
Maximum Height Panel Width Panel Width Panel Width
"B"
"A" "C"
Glass Fabrication:
Two 3/4" (19 mm)
Diameter Holes per Clamp
AFWC2 (FASCIA MOUNT) FABRICATION GUIDELINES
CAT. NO. "A" "B" "C" "D"

AFWC1 4-1/2" (114.3 mm) 1-1/8" (28.6 mm) 3-3/8" (85.7 mm) 3-1/4" (82.6 mm)
AFWC2 3-1/8" (79.4 mm) 1-3/16" (30.1 mm) 1-15/16" (49.2 mm) N/A
AFWC3 3-3/8" (85.7 mm) 1-7/16" (36.5 mm) 1-7/8" (47.6 mm) 2-7/8" (73 mm)

CRL WINDSCREEN SYSTEMS For Pricing on CRL Products, Call Toll Free
Aluminum Rectangular Windscreen Core Mount Posts Aluminum Rectangular Windscreen Core Mount Posts With Glass
With Elevated Bottom Rail and Glass
Aluminum Rectangular Windscreen Surface Mount Posts With Elevated Bottom Rail and Glass
One-Piece Core Mount Frameless Windscreen Clamps

CRL GATE SYSTEMS Contact CRL Tech Sales for complete planning
ARS Custom 100 Series Railing Gate With Glass
AWS Custom Aluminum Windscreen Gate With Glass AWS Custom Aluminum Windscreen Gate With Glass
ARS Custom 300 Series Railing Gate With Glass

CRL GATE SYSTEMS For Pricing on CRL Products, Call Toll Free
CRL ARS Stock Size Glass and Picket Gates MANUFACTURED IN THE USA
• Ready to Install • Glass or Picket Infills BY C.R. LAURENCE

• Designed for 36" Wide x 42" Tall Railing • Seven Standard Powder Coated Finishes
Systems • 6005 Alloy Aluminum/T5 Temper
• Welded and Finished With Powder Coating • Custom Sizes Also Available (See Page R780)
• Stock Gate Sizes for 100, 200, 300 and 350
Series Railings STANDARD COLORS
CRL offers a wide selection of stock sized Gates for our Aluminum
Railing Series that are available for glass and picket applications in
seven standard colors. Gates come fully fabricated, powder coated,
and assembled to fit a standard 36" (914.4 mm) wide opening by Gloss Gloss Gloss Gloss Matte Gloss Matte
42" (1067 mm) standard railing height. Custom gate sizes are also Colors shown are representative only, and may vary slightly from actual gloss, color, and texture. If color match is
available. NOTE: All Gate Hardware is sold separately (see pages critical, please contact Technical Sales for additional information.
R782-R786). For additional information, contact CRL Technical
Sales at (800) 421-6144 in the U.S., 877-421-6144 from Canada, Additional Color Options - CRL has over 250 quick turn custom color options with
or (323) 588-1281 International, and ask for Ext. 7730.
Typical 100 Series Gate Elevation Typical 300 Series Gate Elevation
42-3/8"
(1076.3 mm) 42-3/8"
Gate Gate (1076.3 mm)
Height Overall Height Overall
Railing Railing
Height Height
4" (101.6 mm) 3" (76.2 mm)
1/2" 35" (889 mm) 1/2" 4" (101.6 mm) 3" 1/2" 35" (889 mm) 1/2"
(12.7 mm) Gate Width (12.7 mm) (76.2 mm) (12.7 mm) Gate Width (12.7 mm)
STOCK SIZE ALUMINUM RAILING GATES FOR 1/4" TO 3/8" (6 TO 10 MM) GLASS
CAT. NO.* STYLE FITS OPENING (W X H) ACTUAL GATE SIZE (W X H) BOTTOM RAIL GAP
1GG3642 100 Series 36" (914.4 mm) x 42" (1067 mm) 35" (889 mm) x 38-3/8" (974.7 mm) 4" (101.6 mm)
2GG3642 200 Series 36" (914.4 mm) x 42" (1067 mm) 35" (889 mm) x 40-5/8" (1032 mm) 3" (76.2 mm)
3GG3642 300 Series 36" (914.4 mm) x 42" (1067 mm) 35" (889 mm) x 41-11/16" (1059 mm) 3" (76.2 mm)
35GG3642 350 Series 36" (914.4 mm) x 42" (1067 mm) 35" (889 mm) x 40-13/16" (1036.6 mm) 3" (76.2 mm)
Minimum Order: 1 each. * Specify powder coat color when ordering.
STOCK SIZE ALUMINUM RAILING GATES WITH PICKETS

CAT. NO.* STYLE FITS OPENING (W X H) ACTUAL GATE SIZE (W X H) BOTTOM RAIL GAP
1PG3642 100 Series 36" (914.4 mm) x 42" (1067 mm) 35" (889 mm) x 38-3/8" (974.7 mm) 4" (101.6 mm)
2PG3642 200 Series 36" (914.4 mm) x 42" (1067 mm) 35" (889 mm) x 40-5/8" (1032 mm) 3" (76.2 mm)
3PG3642 300 Series 36" (914.4 mm) x 42" (1067 mm) 35" (889 mm) x 41-11/16" (1059 mm) 3" (76.2 mm)
35PG3642 350 Series 36" (914.4 mm) x 42" (1067 mm) 35" (889 mm) x 40-13/16" (1036.6 mm) 3" (76.2 mm)
Minimum Order: 1 each. * Specify powder coat color when ordering.

CRL GATE SYSTEMS Contact CRL Tech Sales for complete planning
CRL ARS Custom Gate Systems

• Passage, Driveway, Door Style Glass
or Picket Gates Are Available
• Tension Adjustable Self-Closing BY C.R. LAURENCE
Hinge is Standard
• Available Gate Latch, Knob Latch, Electronic
Magnetic Latch, and Panic Hardware Options
• We Can Fabricate Custom Styles From
Stock Components
• Seven Standard Colors, Plus Custom Colors
ARS 100 Series Railing Gate With Glass
STANDARD COLORS
Aluminum Rail System Gates are an integral part of most
commercial, multi-family, and residential projects. Your choice
of gate designs range from basic swing gate to customized
automatic or manual gates. CRL Gates can accommodate Sky White Oyster White Agate Gray Beige Gray Bronze Forest Green Black
standard, electronic or remotely operated locksets, as well
as a variety of opening mechanisms. critical, please contact Technical Sales for additional information.
Additional Color Options - CRL has over 250 quick turn custom color options
with the ability to color match as well.
Self Closing Choose from the 100, 200, 300,
Hinges 350, or Series Top Rail
Supports 1/4" (6 mm)

or 3/8" (10 mm) Glazing
Edge of Glass with Roll-In Vinyl
Self-Latching (Tempered Glass
Latch Lock Not Included)
Specify 2-3/8" (60.3 mm)
Gate Height Square Aluminum Tube
72" (1829 mm)
Max Gate Height
Shipped Completely
3" (76.2 mm) Welded and Assembled
Bottom Clearance Ready to Install
Recomended Glass Sash
(Glass not Included)
Specify Welded
Gate Width Corners
1/2" (12.7 mm) Clearance 48" (1219 mm) 1/2" (12.7 mm)
Standard at Joint Max Gate Width
ARS CUSTOM ALUMINUM RAILING GATES FOR GLASS

POSTGATE1G 100 Series Custom Glass Gate
Minimum order: 1 each. Specify gate color, opening width and height at time of order.
ARS CUSTOM ALUMINUM RAILING GATES WITH PICKETS

POSTGATE1P 100 Series Custom Picket Gate
Minimum order: 1 each. Specify gate color, opening width and height at time of order.
Code Compliance and/or Affiliations:

• Associated Locksmiths of America (ALOA)
• U.S. Consumer Product Safely Commission (CPSC)
• American Fence Association (AFA)
• Association of Pool & Spa Professionals (APSP)
• International Code Council (ICC)
• American Standard Testing Materials International (ASTM) ARS 300 Series Railing Gate With Glass

CRL GATE SYSTEMS For Pricing on CRL Products, Call Toll Free
CRL AWS Custom Gate Systems

• Fabrication to Code for Pool Surrounds MANUFACTURED IN THE USA
BY C.R. LAURENCE
• Tension Adjustable Self-Closing An ISO9001:2000 Certified Company
Hinge is Standard
• Available Gate Latch, Knob Latch, Electronic
Magnetic Latch, and Panic Hardware Options
• We Can Fabricate Custom Styles From
Stock Components
• Gate Hinge and Lock Options Also
Available (See Pages R782-R786)
AWS Custom Gate With Glass

Gates are an integral part of most commercial, multi-family,
and residential projects. Your choice of gate designs range • Seven Standard Colors, Plus Custom Colors
from the basic swinging gate to the most customized automatic
or manual gate you can create. CRL Gates can accommodate (see opposite page)
standard, electronic or remotely operated locksets, as well as
a variety of opening mechanisms.
Welded Corners Supports 1/4" or
3/8" (6 or 10 mm)
Tempered Glazing
with Roll-In Vinyl
Glazing (Tempered Glass
Self-Latching
Self-Closing Stops Not Included)
Latch Lock
Hinges
2-3/8" (60.3 mm)
Square
Aluminum Tube
72" Shipped Completely
(1829 mm) Specify Welded and Assembled,
Max. Gate Height Gate Height Ready to Install
3" (76.2 mm)
Bottom Clearance
Recommended
Glazing Stops
1/2" (12.7 mm) Clearance 48" (1219 mm) 1/2" (12.7 mm) Clearance Specify
Standard at Joints Max Gate Width Standard at Joints Gate Width
• No Rusting, Binding or Staining

• Easy to Install and Maintain
• Limited Lifetime Warranty
Safety Note: Always confirm any such requirements with the appropriate
local pool or safety authorities in your area, as regulations may vary from
region to region. After installation, inform the gate owner that it is their
responsibility to inspect and adjust any gate latches and hinges to
compensate for ground movement and other factors, so that the gate
continues to self-close and self-latch effectively. No product is childproof,
and should not be used in place of adult supervision.
AWS CUSTOM ALUMINUM WINDSCREEN GATES FOR GLASS

POSTGATEAWS AWS Custom Glass Gate
AWS Custom Gate With Glass Minimum order: 1 each. Specify gate color, opening width and height at time of order.

CRL Tru-Close® Gate Hinges 2-1/2" (63.5 mm)

1-1/16"
• Self Closing (27 mm)
• Molded Polymer Construction With No

Unsightly External Springs
• Tension Adjustable Using Only a Screwdriver
CL
• Generally Meets All Pool Barrier Codes
An internal stainless steel adjustable spring allows for smooth even 1-15/64"
closure under different weights, and generally meets all pool barrier codes. (31.4 mm)
UV-stabilized materials are strong, self-lubricating, and weather-resistant.
CL
Available in black or white. If the gate weighs in excess of 55 pounds (25 kg),
or is wider then 3 feet (914 mm), choose Heavy-Duty Hinge Series TCHD1
3-13/16"
shown below. Installation screws sold separately (see page R817). (97 mm)
CAT. NO. COLOR
TCHA1BL Black
TCHA1W White 1-23/32"
Minimum order: 1 each. All Tru-Close Hinges can be combined for quantity pricing. CL (43.7 mm) CL
CRL Tru-Close® Heavy-Duty Gate Hinges 3-1/2" (89 mm)

• Self Closing 1-7/16"
(36.5 mm)
• Generally Meets All Pool Barrier Codes CL
This is a heavier-duty Hinge than the TCHA1 Series shown above. The
internal stainless steel adjustable spring allows for smooth even closure under 1-3/4"
different weights, and generally meets all pool barrier codes. UV-stabilized (44.5 mm)
materials are strong, self-lubricating, and weather-resistant. Available in black
CL
or white. Designed for gates weighing between 55 pounds (25 kg) and 132
pounds (60 kg), or if the gate is between 3 to 4 feet (914 to 1219 mm) wide.
Contact CRL Technical Sales if the gate exceeds 132 pounds (60 kg) or 4 feet 5"
(1219 mm) in width. Installation screws sold separately (see page R817). (127 mm)
CAT. NO. COLOR

TCHD1BL Black 2-3/16"
TCHD1W White (55.6 mm)
CL CL
Minimum order: 1 each. All Tru-Close Hinges can be combined for quantity pricing.
CRL Tru-Close® Round Post Gate Hinges 4-3/4" (120 mm)

• Self Closing 1-7/16" (36.5 mm)
• Generally Meets All Pool Barrier Codes
CL
An internal stainless steel adjustable spring allows for smooth even
closure under different weights, and generally meets all pool barrier codes.
1-3/4"
UV-stabilized materials are strong, self-lubricating, and weather-resistant. (44.5 mm)
It is ideal for fence post diameters of 1-7/8" to 2", 2-3/8", and 2-7/8" (47.6 to
50.8, 60.3, and 73 mm), and gate frame diameters of 1-3/8" and 1-5/8"
(35 and 41.2 mm). Gate widths can be between 3 to 4 feet (914 to CL
1219 mm). Contact CRL Technical Sales if the gate door exceeds 132
5"
pounds (60 kg) or 4 feet (1219 mm) in width. Installation screws sold (127 mm)
separately (see page R817).
CAT. NO. COLOR
2-3/16"
TCHDR2BL Black
CL (55.6 mm) CL
Minimum order: 1 each. All Tru-Close Hinges can be combined for quantity pricing.

CRL Lokk-Latch® Pro 1-7/16"

(36.5 mm)
• Tough, Glass Reinforced 3-1/4"

CL (82 mm)
Polymer and Stainless 5-1/2"
2"
Steel Construction (139.7 mm)
(50.8 mm)
• Can Be Keyed Alike By CL
a Locksmith to Most
Household Doors
1-1/4"
CL
A high-quality Gate Latch with an external (31.8 mm)
push-button access that allows the gate to be
opened and locked from either side. It is easy 2-5/16"
to install with a fitting jig supplied, requiring (58.7 mm) 2-1/4"
just one hole through the post, and requires (57 mm)
no welding. Available in black or white, this CL CAT. NO. COLOR
Gate Latch can be installed onto any square LLP1BL Black
or rectangular post from 1-1/2" to 5" (38.1 to 2-5/8" LLP1W White
127 mm) in width. (66.7 mm) Minimum order: 1 each. All Gate Latches and Locks can be
combined for quantity pricing.
CRL Lokk-Latch® "Series 2" CL

for Square Posts 3-17/32"
(89.7 mm)
• Tough, Glass Reinforced Polymer
and Stainless Steel Construction 2-1/4"
4-17/32" (57 mm)
• Key Locking and Opening From (115 mm) CL
Both Sides
The new and improved pedestrian Gate Latch now
offers easier installation, more versatile use, and a higher 1-1/8"
degree of adjustability. The external push-button allows the 1-3/16" (28.6 mm)
gate to be opened and locked from either side of the gate (30 mm)
at the same time. Adapting the Latch to fit left hand or
right hand hinged gates is now easier. Instead of the
previous six-screw backing plate, the new adaptor plates
are a "snap-on" design retained using just one screw. 2-11/16" CAT. NO. COLOR
Available in black or white, this Latch can be installed on (68.2 mm)
1" LLA2BL Black
all square or rectangular gate materials (metal, wood, vinyl) (25.4 mm) LLA2W White
from 1" to 6" (25.4 to 152.4 mm) wide. Minimum order: 1 each. All Gate Latches and Locks can be
combined for quantity pricing.
CRL Lokk-Latch® "Series 2"

for Round Posts 2-15/16"
(75 mm)
• Tough, Glass Reinforced Polymer and 4-7/16"
(112.7 mm)
Stainless Steel Construction
• Key Locking and Opening From Both Sides
This Lokk-Latch® has an external push-button that allows
the gate to be opened and locked from either side at the same 1-3/4"
time. Adapting the Latch to fit left hand or right hand hinged (45 mm)
gates is now easier. Instead of the previous six-screw backing
plate, the new adaptor plates are a "snap-on" design retained
using just one screw. This Lokk-Latch® includes hardware to
attach to fence posts diameters of 1-7/8" to 2", 2-3/8", and
2-7/8" (47.6 to 50.8, 60.3, and 73 mm).
CAT. NO. COLOR
The Strike includes hardware to attach to gate frame
diameters of 1-3/8" to 1-5/8" (35 to 41.2 mm). For gates with LLA2RBL Black
1-3/8" Minimum order: 1 each. All Gate Latches and Locks can be
1.9" to 2" diameter gate frames contact CRL Technical Sales. (34 mm) combined for quantity pricing.

CRL Magna-Latch® CRL Lokk-Bolt®

"Series 2" Safety Locks Cane Bolts
1-3/4" 4-1/8"
• Magnetically Triggered (44.5 mm) • Key-Lockable Gate Security (105 mm)
and Self-Latching • Tough Molded Polymer
• Key-Lockable for Housings
Added Safety • Marine Grade Stainless
• Ideal for Swimming Steel Rod
Pool Gates
The Magna-Latch® "Series The new CRL Lokk-Bolt® 2-3/4"
(70 mm)
2" is made of quality molded Cane Bolt can be keyed 4-1/8"
polymers and stainless steel, alike to most doors and the (105 mm)
providing horizontal and Lokk-Latch® Pro Lock by a
vertical adjustment for quick 20-1/4" locksmith. Ideal for double
(515 mm)
and easy installation. driveway gates, however ø9/16"
Magna-Latch® "Series 2" is equally as effective on (14.3 mm)
ideal for swimming pools and pedestrian gates. Quick
child safety areas, such as and simple to install. 18"
(457 mm)
daycare centers. Fits most Clever bolt retention
2"
gate and fence heights, (50.8 mm)
grooves mean that this
however ideal height is 4 feet 18" (457 mm) cane bolt
(1219 mm) as the latch can will never drop, drag, bend 2-3/4"
(70 mm)
be installed with the release or grind across driveways.
knob out of reach of toddlers. 2-7/8" Available in black or white.
(73 mm)
Consult local authorities for
height requirements on
swimming pool gates.
Available in black or white.
3-3/8"
(85.7 mm)
LL1MBL Black LB118BXBL Black
LL1MW White LB118BXW White
Minimum order: 1 each. All Gate Latches and Locks can be combined for quantity pricing. Minimum order: 1 each. All Gate Latches and Locks can be combined for quantity pricing.
CRL Gate Stops 1-3/16"

(30.2 mm) CRL Gate Handles 1-1/2"
(38.1 mm)
• Molded, Reinforced 3-5/8"

• Molded, Reinforced
Polymer Construction (92 mm) Polymer Construction
The CRL Gate Stop is the ideal
• Fits Left Hand or Right
gate alignment device for preventing Hand Opening Gates
hinge, latch, and gate damage, and • Ergonomic Design
4-3/4"
for extending gate life. An integrated (120.7 mm)
rubber buffer protects against "gate
The CRL Gate Handle is a 5"
slam" and reduces noise. For gates (127 mm)
higher than 4 feet (1219 mm) two general-purpose handle made to fit
Gate Stops may be required. all types of gates and gate materials.
Available in black or white. It offers convenient gate opening and
closing on virtually all applications.
NOTE: A Gate Stop should not Handles are available in black or
be used on child safety gates, as 1-3/4" white, and guaranteed against
(44.5 mm) 1-3/4"
toddlers may use them as footholds. rusting and staining. (44.5 mm)

TCGS2BL Black LLH1BGBL Black
TCGS2W White LLH1BGW White
Minimum order: 1 each. Colors can be combined for quantity pricing. Minimum order: 1 each. Colors can be combined for quantity pricing.

CRL Z-Lokk™ Magnetic Gate Lock

7-7/8"
• Installed Without Any Milling, Hole-Drilling (200 mm)
or Welding
4-1/16"
• Fits Gate Frames Up to 2-1/2" (63 mm) (103 mm)
• Made From Tough Polymers And Stainless

Steel Components, Which Means No Rust
• Non-Handed
• Overcomes Gate Movement and Sag 7-9/16"
The CRL Z-Lokk™ Magnetic Gate Lock with dual lock (192 mm)
cylinders is ideal for aluminum post gates with pickets. The
Lock is magnetically-triggered and features a 6-pin key
cylinder that can be re-keyed (by a locksmith) to match other
house locks and can be locked or unlocked from either side
of the fence simultaneously. This revolutionary latch meets
Federal ADA standards and is made of a super strong
polymer and stainless steel. Easy installation requires no
special tools or jigs. No milling, hole-drilling or welding is
needed. It also provides up to 1/2" (13 mm) of vertical and
5/8" (16 mm) of horizontal adjustment at any time during or
after installation. This model works well with CRL's 2-3/8"
(60.3 mm) square aluminum gate frames. Special adapter
new
spacers are provided with each lock to accommodate different
gate frame widths. Z-Lokk™ can also be readily mounted to
either left-handed or right-handed hinged gates.
NOTE: If used on double gates, a drop bolt must be used
(see opposite page). Not suitable for child safety gates, as CAT. NO. COLOR
its handle-style design precludes it as a safety device. ZL2BL Black
Minimum order: 1 each. All Gate Latches and Locks can be combined for quantity pricing.

CRL Stainless Steel PullBolt™ Security Locks

• Face Mount and Side Mount Models This Stainless Steel PullBolt™ is designed to provide powerful locking
security for storefronts, doors, frames, and gates. It can act as add-on
to Fit Most Applications security to existing locking systems, or can be used as a primary lock.
• Key-Lockable, Six Pin Lock Security The superbly cast PullBolt™ comes in two models, Side Mount and
Face Mount. It is installed using four, thru-mounted M10 stainless steel
• 3/4" (19 mm) Diameter Bolt With screws. The lock bolt slides snugly across into the sturdy keeper
1-1/4" (31.7 mm) Throw housing for optimum security.
The PullBolt™ is made from 316 Alloy stainless steel, making the
• Limited Lifetime Warranty device ideal for use in marine and other corrosive environments.
• Flexible Mounting Methods The locking mechanism is a deadlock design, which protects the device
from being tampered with, and also assures the system cannot be
locked without the keyholder’s authority.
Side Mount Lock
• Stainless Steel Construction new
Frame Door
Plan View: Side Mount Lock

PBS1PS Side Mount Security Lock Polished Stainless Steel
Minimum order: 1 each. All PullBolt Locks can be combined for quantity pricing.
Face Mount Lock

• Stainless Steel Construction new
Door Door
Plan View: Face Mount Lock

PBF1PS Face Mount Security Lock Polished Stainless Steel
Minimum order: 1 each. All PullBolt Locks can be combined for quantity pricing.

CRL EXTRUSIONS AND MOLDINGS For Pricing on CRL Products, Call Toll Free
CRL Extrusions and Moldings

The Shapes, Materials, and Finishes You Need, When You Need Them
Selection Service
Through years of working with the industries, C.R. Laurence Ordering online at crlaurence.com, by toll free phone, toll free fax,
Company has developed an extensive line of Extrusions and or visiting one of our 20 warehouse locations is easier than ever.
Moldings that enables professionals to create projects with no We take a business-to-business approach to every transaction with our
limitations of design. Whether you are working with glass, customers. We are always pleased to receive your orders, and
mirror, plastics or other materials, you will find the selection of promise to fill them as promptly as possible.
CRL Extrusions to be made of the highest quality materials, in C.R. Laurence's Customer Services are offered in a variety of forms.
the most commonly used shapes, along with hundreds of special The CRL Technical Sales Department offers Product Specialist Groups
application configurations. who are trained in the latest product systems and are ready to answer
Our material choices of aluminum, stainless steel, and plastic all of our product questions.
will allow you to use the most appropriate parts in assembling Most important is knowing that you can depend on CRL to have the
your jobs. Our large selection of finishes make it easier than ever inventory of products you need when you need them. We've invested
to accent the applications in either new or existing environments. in huge supplies of Extrusions and Moldings to be ready to serve you.
And if you need something special, custom shapes and finishes
can be quoted upon request.

CRL EXTRUSIONS AND MOLDINGS Contact CRL Tech Sales for complete planning
CRL’s High Standards Produce the Results

You Need to Achieve Excellence Brite
Anodized
Material Quality Brite Gold

Anodized
Our aluminum smelting process starts with the

highest quality primary ingots for billet castings. Brushed
Anodized
Alloy analysis is made using spectrometers,
Satin
tensile testers, and impact testers for consistent Anodized
results. Stainless steel moldings are made from
Type 430 and 304 metals, and all of our plastic
channels are of the finest materials available. Satin Brass
Satin
Nickel
Aluminum Anodizing
Antique
Only high quality materials and chemicals Brass
are used in conjunction with 6,000 - 10,000 Polished
Amp rectifiers. CRL offers the widest range Nickel
of anodized, brushed anodized, and polished
finishes to precisely match our hardware with
guaranteed consistency. Custom finishes are
Duranodic
available, just ask. Bronze
Brushed
Nickel
Powder Coating Black
Electro-static powder coating of CRL Aluminum Polished

Extrusions and Moldings is done with the finest Copper
powders and latest technology. Quality control
experts constantly monitor pre-treatment
chemicals for consistency. Choose from standard White
stocked colors, or let us match colors to your
specific requirements. Antique
Brushed Copper
Powder Coat Finishes
Custom Shapes and Fabrication

Sky White
CRL can produce virtually any shape extrusion Gloss
from your drawing or samples. Our die makers Agate Gray
Gloss
will precisely design and produce high tolerance
tooling with CNC Machine efficiency. Value
added fabrication of special orders are never Oyster White
a problem. Services available include hole Gloss
punching and drilling, cutting, processing, Bronze Matte
assembly, accessory fitting, stamping, mechanical
polishing, and packaging with fasteners.
Beige Gray
Gloss
Superior Packaging Black Matte
CRL’s years of experience in handling and The full

packaging extrusions have helped us design a selection of
Forest Green RAL Colors are
variety of sound and secure packing methods. Gloss also available.
Protection of finished surfaces by polywrapping
individual lengths and tightly packed full Colors shown are representative
case shipments ensure delivery of flawless only, and may vary slightly from
materials for your project requirements. actual gloss, color, and texture.
If color match is critical, please
contact Technical Sales for
additional Information.

CRL EXTRUSION AND MOLDING PROFILES For Pricing on CRL Products, Call Toll Free
.929 1.000
(23.6 mm) (25.4 mm) .625 .813
.689 (15.9 mm) (20.6 mm)
(17.5 mm)
.242 (6.2 mm) .250 (6.3 mm) .307 (7.8 mm) .327 (8.3 mm) .374 (9.5 mm)
DV101BA L902BA DV607BA L502BA D317BA
1.000 1.506
(25.4 mm) (38.2 mm)
.500 .510 .551

(12.7 mm) (12.9 mm) (14 mm)
.500 (12.7 mm) .510 (12.9 mm) .925 (23.5 mm) 1.000 (25.4 mm) 1.506 (38.2 mm)
SS964 D1627BA DA326BA D1634BA DV710A

1.500 (38.1 mm)
.431
(10.95 mm) .764
(19.4 mm)
.376
(9.55 mm) 1.500
(38.1 mm)
.125
(3.18 mm)
.748 .752
.500 (19.0 mm) (19.1 mm)
.250 (12.7 mm)
(6.35 mm)
.155 (3.94 mm) .500 (12.7 mm) .555 (14.1 mm) .752 (19.1 mm) .764 (19.4 mm)
SS954 D321BA DV749BA D1628BA D320A

.299
(7.59 mm)
.303
(7.7 mm)
.295
(7.49 mm)
.286 1.313
(7.26 mm) (33.35 mm)
.250 1.188
(6.35 mm) (30.18 mm) .622
(15.8 mm)
.467
.250 (11.86 mm)
(6.35 mm)
.290 (7.36 mm) .388 (9.86 mm) .423 (10.74 mm) .429 (10.9 mm) .474 (12.04 mm)
SS955 D631BA D626BA D673BA D622BA
.308
(7.82 mm)
.281
.250 .265
.250 (7.14 mm)
(6.35 mm) (6.73 mm)
(6.35 mm)
.997
(25.32 mm)
.500 .500
.438
.313 (12.7 mm) (12.7 mm)
(11.13 mm)
(7.95 mm)
R .875
(22.23 mm)
.286 (7.26 mm) .290 (7.36 mm) .375 (9.53 mm) .428 (10.87 mm) .469 (11.91 mm)
SS956 SS958 SAC14BS D623BA SAC14BR

For more information on CRL Extrusion and Molding Profiles, please visit our web site at crlaurence.com

CRL EXTRUSION AND MOLDING PROFILES Contact CRL Tech Sales for complete planning
1.078 .874
(27.38 mm) (22.2 mm)
.188 .303 .166

.980
(4.78 mm) .547 (7.7 mm) (4.22 mm)
.754 (24.89 mm)
(13.89 mm)
(19.15 mm)
.469 .360 .355
(11.91 mm) (9.14 mm) (9.02 mm)
1.188 (30.18 mm) .489 (12.42 mm) .290 (7.37 mm) 1.000 (25.4 mm) 1.090 (27.69 mm)
D1600A D3021BA D3031A D336BA D3201BA
1.602
.506 .585 (40.69 mm)
.762 (12.85 mm) (14.86 mm)
1.087
(19.35 mm)
(27.61 mm)
.687 .866 .906

(17.45 mm) .617 (22.0 mm) (23.01 mm)
.551 .553 (15.67 mm)
(14.0 mm) (14.04 mm)
.884 (22.45 mm) 1.185 (30.1 mm) .620 (15.75 mm) .739 (18.77 mm) 1.744 (44.3 mm)
D327BA D600BA D604BA D621BA D672A
.730
(18.54 mm)
1.203 .125 .122 .125

(30.56 mm) (3.18 mm) (3.10 mm) (3.18 mm)
.560
.370 (14.22 mm)
(9.4 mm)
1.323 (33.6 mm) .750 (19.0 mm) 1.000 (25.4 mm) 1.500 (38.1 mm) .882 (22.4 mm)
D7016BA DV2414BA DV2416BA DV2418BA EX6545
.403
.406 .406 (10.24 mm)
(10.31 mm) (10.31 mm)
.403
(10.24 mm) .500 .375
(12.7 mm) (9.53 mm)
.750
.625 .575 (19.05 mm)
(15.88 mm) (14.6 mm) .375 .312
(9.53 mm) .313
(7.92 mm) (7.95 mm)
R .875
(22.23 mm)
.500 (12.7 mm) .642 (16.30 mm) .563 (14.3 mm) .563 (14.3 mm) .536 (13.61 mm) .415 (10.54 mm)
SAC38BS SAC38BR SDCD38BA SDCR38BA SS901 SS914
1.250 .750
(31.75 mm) (19.05 mm)
1.562 .750
(39.7 mm) (19.05 mm)
1.000 1.500
(25.4 mm) 1.438 (38.1 mm)
(36.53 mm)
1.000
(25.4 mm)
1.718 (43.6 mm) .625 1.438 (36.53 mm) 1.000 (25.4 mm) 1.000 (25.4 mm)
(15.9 mm)
SJ72BA SV643A WU1SASL WU3SASL
For more information on CRL Extrusion and Molding Profiles, please visit our web site at crlaurence.com

.500
.375 (12.7 mm)
(9.5 mm)
1.187 1.188
(30.2 mm) 1.188
.812 .812 (30.8 mm)
(30.8 mm)
(20.6 mm) (20.6 mm)
.375 (9.5 mm) .500 (12.7 mm) .750 (19.0 mm)

CR3PVT CR3PVB CR5PVB GR5PV GR7PV
Page R612 Page R612 Page R612 Page R557 Page R557
1.50 (38.1 mm) 1.50 (38.1 mm)

1.00
.746 (25.4 mm)
(18.9 mm)
1.50 1.50
(38.1 mm) (38.1 mm)
1.00
.746 (25.4 mm)
(18.9 mm)
D70BA DV3404BA DV3425BA HRS15BS

crlaurence.com crlaurence.com crlaurence.com crlaurence.com
.975 (24.76 mm) 1.225 (31.11 mm)

1.75 (44.4 mm)
1.126 (28.6 mm)
1.500 1.500
1.75
(44.4 mm) (38.1 mm) (38.1 mm)
1.126
(28.6 mm)
.875 (22.23 mm) 1.125 (28.58 mm)
D630BA J175A GRUC5BS10 GRUC7BS10

crlaurence.com crlaurence.com Page R557 Page R557
1.75 1.75
(44.4 mm) (44.4 mm) .760
(19.3 mm)
2.00
(50.8 mm)
4.00 2.750 .813

(101.6 mm) (69.85 mm) (20.65 mm)
3.00
(76.2 mm)
2.00
(50.8 mm)
1.375
(34.93 mm)
J220A J300A J400A W5B10D

crlaurence.com crlaurence.com crlaurence.com Page R546
1.000 (25.4 mm) 1.000 (25.4 mm) 1.250 (31.75 mm)

1.000 (25.4 mm)
4.125
(104.78 mm)
4.125
3.500 4.125 (104.78 mm)
(88.9 mm) (104.78 mm)
.813
(20.65 mm)
.813 .813 .813

(20.65 mm) (20.65 mm) (20.65 mm)
2.250 (57.15 mm) 2.500 (63.5 mm) 2.500 (63.5 mm) 2.750 (69.85 mm)
B5L10D B5S10D B5T10D B7S10D

Page R532 Page R528 Page R534 Page R530

CRL EXTRUSION AND MOLDING PROFILES Contact CRL Tech Sales for complete planning
Aluminum Railing
2.000 (50.8 mm) .812
(20.6 mm)
.812
.125 2.625
(20.6 mm) (66.7 mm)
(3.18 mm)
.250
(6.35 mm)
2.625
(66.7 mm) 3.000
(76.2 mm)
.250 .500
(6.35 mm) (12.7 mm) 2.000
(50.8 mm)
2.625 (66.7 mm) .812 (20.6 mm)
D637M DV2412A S36CRKW S36CKW R36CKW

crlaurence.com crlaurence.com Page R752 Page R751 Page R755
Aluminum Railing
2.000
3.000 (76.2 mm) 2.125 (50.8 mm)
(54 mm)
.625
(15.9 mm) 2.000
2.375 (50.8 mm)
(60.3 mm) 2.375 2.375
(60.3 mm) (60.3 mm) .625
(15.9 mm)
2.375
.812 (20.6 mm) (60.3 mm)
R36CRKW 1P36W 1P536W 1PKT36W 1TR241W

Aluminum Railing
3.000
(76.2 mm) 3.719
3.500 (94.5 mm)
1.000 (25.4 mm) (88.9 mm)
Pocket Depth
4.000
(101.6 mm)
2.875
1.875 (73 mm)
(47.6 mm)
2.000
(50.8 mm)
4.000 1.250 1.812 2.359

1.750 (44.4 mm) (101.6 mm) (31.7 mm) (46 mm) (60 mm)
1BR241W 4P36W 2TR241W 3TR241W 35TR241W

Aluminum Railing
5.000 (127 mm) .625 (15.9 mm)
Pocket Depth
1.125 .625
(28.6 mm) 1.750 (15.9 mm)
1.750
(44.5 mm) (44.5 mm)
.437
(11.1 mm)
1.750 2.500 (63.5 mm) 1.625 (41.3 mm) 1.750 (44.5 mm)
(44.4 mm) .625 (15.9 mm) 2.312
(58.8 mm)
4TR241W 1FGLSW BRGLSW BRPKTW PF36W
Stainless Steel or Aluminum Tubing
.050 .050 .145 .050

(1.27 mm) (1.27 mm) (3.68 mm) (1.27 mm)
Thick Thick Thick Thick
1.000 1.500 1.900 2.000

(25.4 mm) (38.1 mm) (48.3 mm) (50.8 mm)
HR10BS HR15BS HR19M HR20BS

crlaurence.com Page R653 Page R653 Page R653

Stainless Steel or Brass Cap Rail 2.500 (63.5 mm)

2.000 (50.8 mm)
1.500 (38.1 mm) .875
.375 (22.2 mm)
(9.5 mm)
.312
(7.9 mm)
.625 (15.9 mm) .750 (19 mm) .750 (19 mm)
GR15BS GR20BS GR25BS

Page R554 Page R554 Page R554
4.000 (101.6 mm)

Stainless Steel or Brass Cap Rail
3.500 (88.9 mm)
3.000 (76.2 mm)
2.375
.875 1.875 (60.3 mm)
(22.2 mm) 1.375 (47.6 mm)
(34.9 mm)
.750 (19 mm) .750 (19 mm) .750 (19 mm)

3.000 (76.2 mm)

Stainless Steel or Brass Cap Rail
2.500 (63.5 mm)
2.000 (50.8 mm)
1.375
.875 (34.9 mm)
(22.2 mm)
.375
(9.5 mm)
1.000 (25.4 mm) 1.000 (25.4 mm) 1.000 (25.4 mm)

Stainless Steel Cap Rail 2.500 (63.5 mm)

2.000 (50.8 mm)
1.500 (38.1 mm)

1.000
.500 (25.4 mm)
(12.7 mm)
.500
(12.7 mm)
.625 (15.9 mm) .750 (19 mm) .750 (19 mm)
GRS15BS GRS20BS GRS25BS

Aluminum Cap Rail 3.500 (88.9 mm)
3.000 (76.2 mm) 4.000 x 2.500

2.500 (63.5 mm) (101.6 x 63.5 mm)
1.900 (48.3 mm) 1.250
1.687 (31 mm)
1.189 1.250
.562 (43 mm)
(30 mm) (31 mm)
(14.3 mm)
.750 (19 mm) .750 (19 mm) .750 (19 mm) .750 (19 mm) .750 (19 mm)
GR19M GR25M GR30M GR35M GROV4M


CRL ARCHITECTURAL METALS Contact CRL Tech Sales for complete planning
Architectural Metals Designed, Engineered,

and Manufactured by C.R. Laurence
• Custom Clad Entrance and Storefront Systems
• Custom Break Shaped Aluminum
or Architectural Metals
• Custom Metal Column Covers
• Custom Metal Panel Systems
• Custom Ornamental Metals
• Custom Ornamental Hand Rails
and Guard Rails
• Custom Canopies
C. R. Laurence Company fabricates custom metals that are both
functionally correct and aesthetically pleasing to the eye. We can be
involved in all phases of your project, from initial design to delivery,
with every step controlled by processes that meet strict ISO
standards. Our Los Angeles, California manufacturing facility has a
staff of over 300 that incorporates fine craftsmanship and experience
in the design, fabrication, and finishing of architectural metals.
Some of our work is installed in the finest hotels and retail buildings
in North America. You can see examples of it in many commercial
and entertainment venues. We're able to be involved in so many
projects because we have the versatility to supply what you want, and
to do so in a cost-efficient and timely manner.
Custom architectural finishes and textures are always an option, so
you won't have to be limited to just a few. We specialize in meeting
your requirements.
For more information on custom architectural metals contact CRL
Technical Sales at (800) 421-6144 in the U.S., (877) 421-6144 from
Canada, or (323) 588-1281 International. You can also send e-mail
from the crlaurence.com home page. Click on Contact Us, and then
click on Technical Sales.
Available Finishes
• US-32 #8 Polished Stainless Steel
• US-32D #4 Satin Stainless Steel
• US-3 Polished Brass
• US-4 Satin Brass
• US-9 464 Polished Bronze
• US-10 464 Satin Bronze
• US-10B Oil Rubbed Bronze*
• US-28 Satin Aluminum
Clear Anodized
• Dark Bronze Anodized
• Custom Powder Coated Finishes
• Custom Plated Finishes
• Custom Brushed Finishes
*NOTE: Finish 613 (US-10B) is unstable and will
vary when applied to different alloys or forms of
base metal, and to products of different
manufacturers.

CRL HOSPITALITY HARDWARE For Pricing on CRL Products, Call Toll Free
CRL Partition Posts and

Booth Divider Systems
• Hand Fabricated in Our California
Manufacturing Facility
• Stock Sizes and Finishes for
Off-the-Shelf Ordering, or Custom
Fabricated to Your Needs
• Hundreds of Beautiful Finishes
• Full Inventories for Quick
Fulfillment of Your Orders
• Complete Planning and
Installation Assistance
CRL Sneeze Guards

• Six Series of Attractive and Functional
Sneeze Guards in Hundreds of Colors
and Configuration Options
See our complete
selection of hospitality
hardware, along with
color photos of finished
projects, in our HS07
Hospitality and Service
Hardware Catalog. You
can view it online at
crlaurence.com. MANUFACTURED IN THE USA
BY C.R. LAURENCE
An ISO9001:2000 Certified Company • Several Distinct Designs
• A Full Selection of Components

So You Can Do-It-Yourself
Only C.R. Laurence gives you so many options when it comes to Hospitality and Service Hardware. You can select pre-fabricated units
off-the-shelf, order them custom made, or buy the components to make them yourself. We give you so many options because no two jobs
are alike, and you need to be able to respond to your customer's needs as quickly as possible with quality made, attractive, and cost
efficient furnishings.

CRL HOSPITALITY HARDWARE Contact CRL Tech Sales for complete planning
CRL Service Rails CRL Counter Mount Service Rails

• Counter and Floor Mount Models are Available
in 1-1/2" and 2" (38.1 and 50.8 mm) Tubing 18-1/2" (470 mm)
• Protects Access to Service Area 14" 24"

(356 mm) (610 mm)
• Available in Polished Brass, Brushed
Stainless, and Polished Stainless Steel 5"
(127 mm)
R8.250 6"
(R210 mm) (152 mm)
• Can Be Cut to Size in the Field

BY C.R. LAURENCE
3"
(76 mm)
12" (305 mm)
CRL Counter Mount Service Rails are easily secured with screws
and CRL Cat. No. 32629 Metal Contact Cement (see page R667).
The Rails can be field cut for fitting to your particular installation needs.
Each Rail is supplied with six #10 x 1-1/2" (38.1 mm) long Flat Head
Wood Screws.
CAT. NO. TUBE DIAMETER FINISH
CMSR15PB 1-1/2" (38.1 mm) Polished Brass
CMSR15BS 1-1/2" (38.1 mm) Brushed Stainless
CMSR15PS 1-1/2" (38.1 mm) Polished Stainless
CMSR20PB 2" (50.8 mm) Polished Brass
CMSR20BS 2" (50.8 mm) Brushed Stainless
CMSR20PS 2" (50.8 mm) Polished Stainless
Minimum order: 1 each. All Counter Mount and Floor Mount Service Rails can be combined for quantity pricing.
CRL Floor Mount Service Rails

18-1/2" (470 mm)
14"
(356 mm)
R8.250
CRL Floor Mount (R210 mm)
Service Rails are easily 5"
secured with screws (127 mm)
and CRL Cat. No.
32629 Metal Contact 60"
(1524 mm)
Cement (see page
R667). The Rails can
be field cut for fitting
to your particular
installation needs.
Each Rail is supplied
with six #10 x 1-1/2"
(38.1 mm) long Flat
Head Wood Screws.
CAT. NO. TUBE DIAMETER FINISH

CRL Service Rails are designed to provide access for servers
FMSR15PB 1-1/2" (38.1 mm) Polished Brass
to the service area. They are available in two models: Counter
FMSR15BS 1-1/2" (38.1 mm) Brushed Stainless
Mount and Floor Mount. Rails are completely fabricated and FMSR15PS 1-1/2" (38.1 mm) Polished Stainless
ready to install. They can be field cut to the correct size for your FMSR20PB 2" (50.8 mm) Polished Brass
project. Rail Mounting Flanges are secured with screws and FMSR20BS 2" (50.8 mm) Brushed Stainless
CRL Cat. No. 32629 Metal Contact Cement (see page R667). FMSR20PS 2" (50.8 mm) Polished Stainless
Minimum order: 1 each. All Counter Mount and Floor Mount Service Rails can be combined for quantity pricing.

CRL HOSPITALITY HARDWARE For Pricing on CRL Products, Call Toll Free
CRL Combination Foot Railing Brackets

• Mounts to Bar With Additional W
Support Leg to Floor
CRL Combination Foot Railing Brackets H
are available in three architectural finishes for
1-1/2" or 2" (38.1 or 50.8 mm) Tubing (see
page R653). Brackets are individually packed
and come with two #12 x 2" (50.8 mm) Phillips
Flat Head Wood Screws. Tubing is secured
with integral set screw.
NOTE: Recommended maximum spacing of
Foot Railing Brackets is 48" (1219 mm). For
heavy use, steel inserts should be used for added
strength. Contact CRL Technical Sales for details.
COMBINATION BRACKETS FOR 1-1/2" (38.1 MM) TUBING

CAT. NO. FINISH "W" WIDTH "H" HEIGHT
FRCB15BS Brushed Stainless Steel 6-1/16" (154 mm) 6-3/16" (157.4 mm)
FRCB15PS Polished Stainless Steel 6-1/16" (154 mm) 6-3/16" (157.4 mm)
FRCB15PB Polished Brass 6-1/16" (154 mm) 6-3/16" (157.4 mm)
Minimum order: 1 each. All Foot Railing Brackets can be combined for quantity pricing.
COMBINATION BRACKETS FOR 2" (50.8 MM) TUBING

FRCB20BS Brushed Stainless Steel 6-5/16" (160 mm) 6-3/16" (157.4 mm)
FRCB20PS Polished Stainless Steel 6-5/16" (160 mm) 6-3/16" (157.4 mm)
FRCB20PB Polished Brass 6-5/16" (160 mm) 6-3/16" (157.4 mm)
Minimum order: 1 each. All Foot Railing Brackets can be combined for quantity pricing. See page R653 for Tubing.
CRL Bar Mount Foot Railing Brackets

• Mounts to Bar Only
W
CRL Combination Brackets for Foot Railings are
available in three architectural finishes for 1-1/2" (38.1 mm)
or 2" (50.8 mm) Tubing. Brackets are individually packed
and come with two #12 x 3/4" (19 mm) and one #12 x 2"
(50.8 mm) long Phillips Flat Head Wood Screws, one 5/16 - H
18 x 3" (76.2 mm) long All Thread, one 7/8" (22.2 mm) dia.
Washer, one Spring Lock Washer, and one 5/16" (7.9 mm)
Hex Nut. Tubing is secured with integral set screw included.
NOTE: Recommended maximum spacing of Foot
Railing Brackets is 48" (1219 mm). For heavy use, steel
inserts should be used for added strength. Contact CRL
Technical Sales for details.
BAR MOUNT BRACKETS FOR 1-1/2" (38.1 MM) TUBING
FRBB15BS Brushed Stainless Steel 6" (152 mm) 3-3/4" (95.3 mm)
FRBB15PS Polished Stainless Steel 6" (152 mm) 3-3/4" (95.3 mm)
FRBB15PB Polished Brass 6" (152 mm) 3-3/4" (95.3 mm)
BAR MOUNT BRACKETS FOR 2" (50.8 MM) TUBING

FRBB20BS Brushed Stainless Steel 6-7/8" (175 mm) 4-1/2" (115 mm)
FRBB20PS Polished Stainless Steel 6-7/8" (175 mm) 4-1/2" (115 mm)
FRBB20PB Polished Brass 6-7/8" (175 mm) 4-1/2" (115 mm)

CRL HOSPITALITY HARDWARE Contact CRL Tech Sales for complete planning
CRL Floor Mount Foot Railing Brackets

• Mounts to Floor Only
H
CRL Floor Mount Foot Railing Brackets
are available in three architectural finishes
for 1-1/2" or 2" (38.1 or 50.8 mm) Tubing (see
page R653). Brackets are individually packed
and come with two #12 x 2" (50.8 mm) Phillips
Flat Head Wood Screws. Tubing is secured with
integral set screw.
NOTE: Recommended maximum spacing of W
Foot Railing Brackets is 48" (1219 mm). For
heavy use, steel inserts should be used for added
strength. Contact CRL Technical Sales for details.
FLOOR MOUNT BRACKETS FOR 1-1/2" (38.1 MM) TUBING

FRFB15BS Brushed Stainless Steel 6-5/16" (160 mm) 5-7/8" (149.2 mm)
FRFB15PS Polished Stainless Steel 6-5/16" (160 mm) 5-7/8" (149.2 mm)
FRFB15PB Polished Brass 6-5/16" (160 mm) 5-7/8" (149.2 mm)
FLOOR MOUNT BRACKETS FOR 2" (50.8 MM) TUBING

FRFB20BS Brushed Stainless Steel 6-5/8" (168.3 mm) 5-7/8" (149.2 mm)
FRFB20PS Polished Stainless Steel 6-5/8" (168.3 mm) 5-7/8" (149.2 mm)
FRFB20PB Polished Brass 6-5/8" (168.3 mm) 5-7/8" (149.2 mm)
CRL Foot Rail Tubing Ends Flat End Caps Dome End Caps
See page R654 See page R655
• 1-1/2" or 2" (38.1 or 50.8 mm) Diameters
in Three Finishes to Match Our Foot Rail Tubing
Ends for Foot Rail Tubing are available in three architectural
Ball End Caps Scroll End Caps
finishes. The use of our Cat. No. 32629 Metal Contact Cement Available at See page R658
(see page R667) is required to achieve a secure and permanent crlaurence.com
bond. For 1-1/2" or 2" (38.1 or 50.8 mm) Round Tubing, see
page R653.
CRL Glass Stemware Racks new

• Safe and Attractive Way to Hang Stemware
• Ideal for Mounting Under a Cabinet
• Available in Brass and Chrome
• Easy to Install
CRL Glass Stemware Racks provide an attractive means
to hang glass stemware up and out of the way. They come
in 9-3/4" (248 mm) lengths, which allows you to mount under
a standard size wood cabinet. Simply attach the rack using CAT. NO. LENGTH HEIGHT FINISH
the brackets and wood screws supplied. Available in both GSR10BR 9-3/4" (248 mm) 1-3/4" (44.5 mm) Brass
polished brass and chrome. Multiple units may be mounted GSR10CH 9-3/4" (248 mm) 1-3/4" (44.5 mm) Chrome
side by side for a true bar look. Minimum order: 1 each. Finishes can be combined for quantity pricing.

CRL WALL PROTECTORS For Pricing on CRL Products, Call Toll Free
CRL Adjustable Wall Protectors new MANUFACTURED IN THE USA

BY C.R. LAURENCE
• Great for Elevators, Hallways, Corridors or

Other Areas Where Walls Require Protection CRL Wall Protectors were designed to protect walls in areas
• Easy to Assemble Using Component Parts that are subject to heavy pedestrian traffic along with potential
impact from cart and gurney activity. The extruded aluminum Wall
• Two Finishes Available Protector Rail comes in two standard architectural finishes, and
• Custom Powder Coated Finishes Also Available uses a 3/4" (19 mm) diameter Slide Fitting that is fully adjustable
horizontally for ease of installation.
• Two Styles of Protective End Caps
Elevators Hallways and Corridors
Three Easy Steps
Secure Mounting Studs to Wall with Appropriate Fasteners Insert Aluminum Slide Fittings into the Railing Secure Slide Fittings to Mounting Studs with Set Screws
With Only Five Component Parts
Allen Screw
Concrete Anchors
Lag Bolt
Choice of Attachment Fasteners Mounting Stud Slide Fitting Aluminum Railing Choice of Protective End Caps
Wall Protector Installation Sequence

1. Measure the area to be protected. 7. Position the Aluminum Railing in front of the Mounting Studs, align
2. Determine and mark fixing points for the Mounting Studs. the Slide Fittings with the Studs, and tighten the Slide Fittings.
3. Determine which Stud Fasteners work best for your installation. 8. Push the Aluminum Railing on the Mounting Studs and secure it by
4. Attach Mounting Studs with Fasteners to pre-marked fixing points. tightening the set screw in the stud groove.
5. Cut the Aluminum Railing to length. 9. Press in the Protective End Caps. Fasten with screws.
6. Insert the Slide Fittings into the Aluminum Rails close to their 10. Grasp Rail at each end and test to assure Slide Fittings have been properly
approximate mounting position and snug lightly. secured to the Stud Fittings. Tighten if loose. Clean area and the job is done.

CRL WALL PROTECTORS Contact CRL Tech Sales for complete planning
CRL Adjustable Wall Protectors new 2" (50.8 mm)

Projection
The easy to assemble parts make for quick

and professional results on the job site. Simply
attach the Mounting Stud to the substrate with
your choice of Attachment Fasteners. Then
insert the Slide Fitting into the Mounting Stud
and tighten the set screw. In just a few easy
steps you can install a complete assembly.
CRL Extruded Aluminum CRL Flush CRL Return

Wall Protector Rail End Cap End Cap
1/2"
(12.7 mm)
2"
(50.8 mm)
new new
CAT. NO. WPEC1BL CAT. NO. WPEC2BL
CAT. NO. FINISH STOCK LENGTH CAT. NO. FINISH DESCRIPTION

WPR2BA Buffed Brite Anodized 12'-2" (3.7 m) WPEC1BL Black Plastic Flush End Cap
WPR2BSH Brushed Stainless Anodized 12'-2" (3.7 m) WPEC2BL Black Plastic Return End Cap
Minimum order: 1 each. Stock lengths longer than 108" (2.74 m) must ship common carrier, unless you request we Minimum order: 1 each. Supplied with self-drilling mounting screws.
cut them for U.P.S. A Cutting Charge will apply.
CRL Mounting Stud and Slide Fitting Kit new

The CRL Mounting Stud and Slide Fitting Kit is sold as a
complete package with everything needed (except for the
Mounting Stud Fasteners, which you purchase separately).
To mount the Aluminum Wall Protector Rail the Mounting
Studs are secured to the wall with a maximum spacing of 36"
(914 mm) apart. Next the Slide Fitting is inserted in the Wall
Protector Rail and aligned with the Mounting Studs, then it is
Square Head Bolt Slide Fitting Set Screw Mounting Stud
secured in place by tightening down on the Square Head Bolt.
After all the Slide Fittings are aligned and secured, slip all the CAT. NO. FOR USE WITH
Slide Fittings into the attached Mounting Studs and secure by Buffed Brite Anodized Rail
WPR2MBA
tightening all of the Allen Screws (one per fitting). WPR2MBSH Brushed Stainless Anodized Rail
CRL Mounting Stud Fasteners

All CRL Mounting Stud Fasteners are stainless steel, with a 3/8"–16
thread size.
3/8" Allen Screw
CAT. NO. DESCRIPTION THREAD SIZE LENGTH
AS38112 Allen Screw 3/8"-16 1-1/2" (38.1 mm)
CA1222 Concrete Anchor 3/8"-16 2-1/4" (57.1 mm)
HB383S Hanger Bolt 3/8"-16 3" (76.2 mm) 3/8" Concrete Anchor 3/8" Hanger Bolt

CRL GLASS DECORATIVE FILM For Pricing on CRL Products, Call Toll Free
CRL Glass new

Decorative Film
• Creates Etched Glass Look
• Easy to Install
• Improves Safety and Visual Awareness
• Adds Privacy and Reduces Glare
• Limitless Range of Possibilities
• Glass Decorative Film Can Be
Installed Indoors or Outdoors
New from CRL, Decorative Film for glass windows, doors,
railings or partitions in a variety of designs and patterns.
CRL's Glass Decorative Film can be used in retail stores,
offices, restaurants, and in homes to reduce glare, fading of
fabrics, and help cut cooling costs. It improves comfort,
privacy, and overall appearance.
The Film is a PVC vinyl with an acrylic-based permanent
adhesive. Each roll ships in a cardboard tube complete with
installation and cleaning instructions. Glass Decorative Film
can also be customized with your company name, logo or other
personalized messages.
Glass Decorative Film Used as a Privacy Screen
Custom Application With Logo Glass Decorative Film Installed on Glass Windscreen Panels
CRL Glass Decorative Film can be customized to your individual CRL Decorative Film can be installed indoors or out. It is ideal for
requirements. Your company's name or logo can be printed onto use on windscreens or balconies due to increased privacy and improved
the film for front windows or doors. It can also be applied to office appearance. Applies quickly to existing glass panels or can become a
glass partitions with department or personnel names printed on the component of new construction. CRL's Decorative Film is resistant to
Film. CRL Glass Decorative Film is available in bulk rolls for larger fading, and is easily cleaned using normal household glass cleaners.
projects. Contact CRL Technical Sales for details.

CRL GLASS DECORATIVE FILM Contact CRL Tech Sales for complete planning
CRL Glass Decorative Film Patterns

• Seven Stock Patterns
in 96" (2438 mm)
Long Rolls
• All Are Available in
Both 36" (914 mm)
and 48" (1219 mm)
Widths Fiberglass Oriental Gloss Oriental Matte
• Can Be Installed
Indoors or Outdoors
Mist Frosted White Cola Brown Tahiti Blue
36" X 96" (914 X 2438 MM) ROLLS 48" X 96" (1219 X 2438 MM) ROLLS
CAT. NO. PATTERN SURFACE CAT. NO. PATTERN SURFACE
K0P40236 Fiberglass Smooth K0P40248 Fiberglass Smooth
K0P40136 Oriental Gloss Smooth K0P40148 Oriental Gloss Smooth
K0P40336 Oriental Matte Smooth K0P40348 Oriental Matte Smooth
KHE10436 Mist Textured KHE10448 Mist Textured
KPE20136 Frosted White Textured KPE20148 Frosted White Textured
KLE30536 Cola Brown Textured KLE30548 Cola Brown Textured
KHE10236 Tahiti Blue Textured KHE10248 Tahiti Blue Textured
Preparation and Installation of CRL Glass Decorative Film • Instructions in Every Roll
Prepare Glass Surface Measure Height and Width Spray Solution on Adhesive
Place Film on Surface Squeegee Out Any Bubbles Trim Edges and Clean

CRL TOOLS AND ACCESSORIES For Pricing on CRL Products, Call Toll Free
CRL Post Leveling Stand new

• Quick Clamping Action Fits 1-1/2" Schedule 40 Pipe
• Rigid Steel Construction
• Folds Flat for Storage MANUFACTURED IN THE USA
BY C.R. LAURENCE
• Simple Height and Plumb Adjustment

Perhaps one of the most time consuming portions of any post railing installation is
the alignment of core mount posts. It takes countless hours of shimming, plumbing and
adjusting, until now. CRL introduces the CRL Post Leveling Stand. It was originally
designed for our CRS Railing System, but works with any 1-1/2" Schedule 40 core
mounted post railing system.
Its quick clamping action allows you to easily adjust and set a post, and then move on
to the next. The tripod legs of the CRL Post Leveling Stand have high ground clearance,
allowing bottom horizontal rails to pass underneath without obstruction. The tripod legs
also pivot for working in tight places and acute angle corners. The feet easily adjust up
and down, taking the hassle out of the plumbing operation. They are also quickly
convertible into an offset height configuration for use on stairs or curbs.
The CRL Post Leveling Stand's rigid steel construction with corrosion resistant powder
coated finish provides the strength and durability you require. It easily folds flat for
storage, and can also be used as a stabilizer for flange mount post installations.
CAT. NO. 1540PLS
See the CRL73 Master

Catalog for our complete
selection of quality tools
CRL Folding Post Level

• For Posts, Pipes, and Signs
• Opens to Any Angle
• Positive Lock Every 15 Degrees
• Hands-Free Design for Vertical
and Horizontal Readings
• Large, Easy-to-Read Bubble Vials
new
The CRL Folding Post Level is the ideal tool to use when installing CRL Architectural
Posts and Railings, both round and rectangular, or any other similar job that requires a
plumb or level installation. This tool is "hands-free", and checks vertical or horizontal on
both planes simultaneously. Sturdy high-impact plastic molded body with three large
bubble vials. Minimum order is one each. CAT. NO. 34008

CRL TOOLS AND ACCESSORIES Contact CRL Tech Sales for complete planning
CRL Econ-O-Post Hole Form new • Easy to Install and Remove
• Creates Tapered Hole With • Sizes for

Extra Space to Plumb Posts Large or
• Sealed From the Bottom to Small
Keep Out Concrete, Debris, Posts
and Water
• Lightweight and Sturdy
• Easy to Use
T
EQ EQ
Pull-Tab Tab Marks
Center of Econ-
O-Post Hole
CAT. NO. 3006 CAT. NO. 4012 Form for Field
Small Form Large Form Measuring
Use the CRL Econ-O-Post Hole Form when
setting concrete to allow posts to be set later. H
Helical Groove
Econ-O-Post Hole Form is sealed from the to Allow Easy
bottom to keep concrete, water, and debris from Removal of
entering. The Econ-O-Post Hole Form's shape Form
creates a tapered hole with extra space to plumb
posts. Helical grooves allow the sleeve to be Snap-on Base
easily removed after the concrete is set, when B
you are ready to install the posts. C
SPECIFICATIONS
CAT. NO. DIMENSIONS POST SIZE OF
SIZE T B H C RAILING OR FENCE
3006 3" 3-1/2" 6" 4-3/4" Up to 2-3/8" (60.3 mm) O.D. Pipe
Small (76.6 mm) (88.9 mm) (152.4 mm) (120.6 mm) Up to 2" (50.8 mm) Square Post
Tapered hole allows you 4012 4" 5" 12" 7" Up to 3-1/2" (89 mm) O.D. Pipe
to plumb posts before Large (101.6 mm) (127 mm) (304.8 mm) (177.8 mm) Up to 2-1/2" (63.5 mm) Square Post
adding the cement Minimum order: 1 each. Sizes can be combined for quantity pricing.
CRL Safety Guard Rail Base System new

• Use Them With Your Own 2 by 4’s to
Create Temporary Guard Rails
• Cost Effective, Reusable, and Meets
OSHA Requirements
The CRL Safety Guard Rail Base System is a reusable
base for constructing freestanding temporary guard rail and
stair rail systems that exceed OSHA standards. All you add
are the fasteners and your own 2 by 4’s. The CRL Safety
Guard Base needs no bracing, and anchors into most
materials, including concrete. Two 2 by 4's inserted into the
center to form a strong, rigid post design. Toe boards need
no fasteners, and drop directly into the channels on each
SPECIFICATIONS:
Safety Guard Base. When permanent rails are ready to be Base Dimensions: 5-5/8" x 8-5/8"
installed, the Guards can be easily removed and reused in (142.9 x 219 mm) Square
another location. Height: 5-1/8" (130.2 mm)
Safety Guard Bases are molded in one piece from a Weight: 3 Pounds (1.36 kg)
durable, high-impact, safety orange polymer, and have a
one-year replacement guarantee. Minimum order is
one each. CAT. NO. SGR1

CRL Construction Master Calculator

• Ideal for Contractors, Builders, Architects,
Engineers, and Tradespersons
• Includes CD-ROM With English and Spanish Easy-to-Read Display
"How To" Video and User's Guide
The Construction Master is easy to use to quickly find solutions to challenging
building and dimensional problems - no need to remember complicated formulas. Enter
the numbers just as you would say them and the solutions appear in an instant. Perfect
for completing layouts, plans, and bids on the job site or in the office. Reduces the risk
of expensive errors when estimating costs and materials. Minimum order is one each. CAT. NO. CM5
CRL LA5 Distance Measuring Laser

• Accurate and Dependable Measurements With the Press of a Button
• Distance Measuring Accuracy of 1/16" at 650' (1.6 mm at 198 m)
• Measures Distances, Areas, and Volumes Indoors and Out Easy-to-Read Display
The CRL LA5 Distance Measuring Tool allows contractors, architects, estimators, and project
managers to take critical layout measurements accurately and dependably with the press of a button.
Save valuable time and re-work with each project. The LA5 measures distances, areas, volumes, and
height differences. It adds, subtracts, and even multiplies. Continuous trace measurements and time
delayed readings. Quickly estimate building material requirements. This hand held battery powered unit
is a contractor’s dream! Light, easy to use, accurate, and fast. Operates on four AA batteries (included).
Minimum order is one each. CAT. NO. LA5
CRL 100 Foot Strait-Line Chalk Reel CRL Chalk Refills

• Made of • Available in Blue and Red in Easy
Aluminum Alloy to Dispense 8 Ounce Bottles
• 100' (30.5 m) CRL Chalk Refills contain a micro-fine chalk
for a perfect line every time. It is available in
Long Line blue and red, and is packaged in a non-
breakable, 8 ounce (237 ml) polyethylene
The CRL 100 Foot (30.5 m) Strait-Line Chalk Reel has a durable bottle with a spout that makes it easy to pour.
aluminum alloy box with an easy to fill side slide opening. It gives a
sharp, clear line every time, and can also double as a plumb bob. CAT. NO. CONTENTS COLOR
Use Cat. No. P8R or P8B (at right) to refill your chalk line. Minimum P8R 8 oz. (237 ml) Red
order is one each. P8B 8 oz. (237 ml) Blue
CAT. NO. 125100 Minimum order: 1 each.
CRL 25 Foot Ultimate Tape Rule CRL Starrett 25 Foot Digitape

• Displays Feet, Inches,
• Ergonomic Case Fractions or Centimeters
for a Secure Grip in Large, Digital Figures Easy-to-Read
Display
• 1" Wide x 25' • Converts Between
Long Rigid Blade English and Metric
The easy to use CRL Digitape offers remarkable electronic
measuring ability. An internal optical sensor 'reads' the black
This CRL Ultimate Tape Rule has an innovative inline gear that squares printed along the length of the 25 foot (7.62 m) blade
allows it to fit perfectly in your hand for exceptional comfort and a similar to a bar code, constantly recalibrating itself every 1-1/2"
secure grip. The nylon coated, 25 foot (7.62 m) blade has 16" (38.1 mm). Resets to zero at any blade position, and
(406.4 mm) stud markings, and features a triple rivet hook automatically adds length of case to inside measurements.
connection. An active bumper prevents retraction shock ensuring Stores measurements in memory. The result is consistent and
long blade life. Minimum order is one each. reliable accuracy. Minimum order is one each.
CAT. NO. 54225 CAT. NO. D125

CRL "Angletronic" Measuring Tool CRL "Anglefix" Measuring Tool

• Measures Angles Between 0 and 180 Degrees • Measures Angles Quickly and Precisely
• Stores Up to 56 Measurement Values • Built-in-Spirit Levels Help
• Battery-Saving Automatic Shut-Off Feature Keep it in Position
• Easy to Read Analog Display
With the CRL "Angletronic"
angles between 0 and 180 The "Anglefix" Measuring Tool is a precision
degrees can be measured measuring device that works quickly and easily.
quickly, precisely, reliably, and Built-in horizontal and vertical spirit levels assist in
read off the digital display. You keeping it in position, so you can reliably set and
can even take measurements in read any angle. The angle measurement is
difficult positions, store the displayed on an easy to read analog display.
measurements, and access A clamping screw locks the "Anglefix" in any
them at a later time. position. Two types of "Anglefix" are offered.
Optoelectronics provides The Mini "Anglefix" is a handy tool for glaziers,
accuracy and maintenance free interior finishers, and metal workers. The Maxi
service life for years. Operates "Anglefix" is intended for glaziers, carpenters, builders,
on four AA batteries (included). and metal workers. The Maxi Model is additionally fitted
Minimum order is one each. CAT. NO. TT505 with points, one of which can be removed and fitted with
a pencil for compass use.
CRL POLYCAST®
Protractor/Angle Finder
new CAT. NO.
TT450
TT500
MODEL
Mini
Maxi
LEG LENGTH
14-9/16" (370 mm)
23-5/8" (600 mm)
MEASURING POINT
No
Yes
Minimum order: 1 each. All measuring devices on this page can be combined for quantity pricing.
• High Impact
POLYCAST® Plastic CRL 9" Torpedo Level
Construction • Heavy-Duty Cast Aluminum Frame
• Adjustable Angle • Easy Top and Side Reading
Pointer for Marking
Angles • Powerful Magnetic Base for "Hands-Free" Use
• Pitch Angle
Calculator on
the Back
Back View
• Magnetic Base
The CRL 9" (228.6 mm) Torpedo Level is a durable, heavy-duty
The CRL Magnetic POLYCAST® Protractor/Angle Finder measures cast aluminum frame with large, top read vial window. It’s three
any angle from 0 to 90 degrees in any quadrant. It comes with a tinted 360 degree vials, (one for plumb, level, and 45 degree miter)
dampened pendulum for quicker readings and an adjustable angle are easy reading and replaceable in seconds. Ideal for commercial
pointer for marking and transferring angles. The magnetic back and work, a powerful magnetic strip on the base allows for "hands-free"
base provides "hands-free" use when working with ferrous surfaces. operation, and holds the level securely to all iron and steel
Also included on the back is a Pitch Angle Calculator. surfaces. Individually carded in a vinyl pouch.
Minimum order is one each. CAT. NO. 36MPP Minimum order is one each. CAT. NO. ST42465
CRL Stanley 48" FatMax™ Level

• Superior Aluminum Structure
for Increased Durability
• Shock Absorbing End Caps
• Non-Marring Side Bumpers
The CRL Stanley 48" (1219 mm) FatMax™ Level is
constructed with a seamless one-piece aluminum extrusion,
and has a level accuracy of 0.0005" (.01 mm). Block vials
and shock absorbing end caps assure maximum accuracy
and durability. The FatMax™ Level also features non-marring
side bumpers to prevent damage when working against CAT. NO. ST43502
finished surfaces. Minimum order is one each.

CRL 18V DC Cordless Variable CRL Universal Pressure Drill

Speed Impact Driver/Drill Kit • Drill 3/8" Steel in 45 Seconds
• Variable Speed and Impact Frequency • Bits Last Up to 10 Times Longer
• Reversible • Cuts Labor Costs by Up to 75%
• 3/8" Keyless Chuck • New Pipe Adaptor for Drilling Up
The CRL 18 Volt Cordless Variable To 6" Diameter Pipe
Speed Impact Driver/Drill has a keyless The CRL Universal Pressure Drill is excellent
3/8" (9.5 mm) chuck and has two speed for overhead drilling. Typical 1/2" (12.7 mm) drill
ranges: 0 to 500 rpm, and 0 to 1150 rpm bits usually take 210 pounds of pressure to get
and an impact drill with an impact frequency best results. With the CRL Universal Pressure
of 6400 or 18000 strokes per minute. Drill you'll only need 28 pounds of less tiring and
CAT. NO. DESCRIPTION less dangerous pressure to do the same job. Drill
Includes: Battery, 110V bit life can be extended up to 10 times when
LD147 18 Volt DC Variable Speed Impact Drill Kit Charger, Bit Assortment,
LD147B 18 Volt DC Battery Cartridge for LD147 and Carrying Case compared to hand drilling. Excellent results with
LD147C 110V Charger for 18 Volt DC Battery self-drilling screws too.
Minimum order: 1 each. CAT. NO. UPD1
CRL Makita 1" Rotary Hammer Drill

• Variable Speed • 0 to 4500 Blows
0 to 1100 RPM Per Minute
• 7 Amp Motor • Uses S.D.S. Drills CAT. NO. UPDPA1
Pipe Adaptor
new
The new CRL Pipe Adaptor for the Universal Pressure Drill allows
you to easily field drill holes in steel pipe up to 6" in diameter. Each
Includes: Depth Gauge, Side Pipe Adaptor is made from steel for added rigidity, and includes a
Handle, and Carrying Case
Brace Foot with pivoting saddle and a 28" (711 mm) long Slide Rod.
This Heavy-Duty Rotary Hammer with a variable speed and When combined with the Gear Box Drill Mounting Bracket from our
reversing motor is ideal for Wedge-Bolt drilling. It features a Cat No. UPD1 Universal Pressure Drill (sold separately) you create
quick bit changeover system for positive bit retention, and a a portable drill press that will reduce your drilling labor costs by up
conveniently located reversing switch. Readily accepts S.D.S. to 75%. A typical 3/16" drill bit requires 100 pounds of pressure to
Plus or Dual Slot type masonry bits. properly drill into steel. With the Pipe Adaptor and the UPD1, you
Minimum order is one each. CAT. NO. HR2455X will exert only 8 pounds of pressure. Minimum order is one each.
CRL P-Post Top Rail Installation Tool Kit

• Use for Installing Top Rails on P-Posts
• Works With Universal Pressure Drill Grease Stick
(See Above) Cat No. GS29 Flat File
Center Punch
Cat No. G78 Cat No. FF12MC
The Installation Kit is a valuable tool
for drilling and tapping the underside of
Schedule 40 Top Rail Tubing prior to
Drill Bit Holder
attaching to P-Series Top Saddle Posts.
Cat No. DBH1
Kit Includes: One Center Punch, two Tin
Coated Drill Bits, one Grease Stick, two
Tin Coated High Speed 10-32 Machine
Tin Coated 10-32 Tap
Taps, one Tap Wrench, one Flat File, two
Cat No. T1032TC
Quick-Grip Bar Clamps, and a set of
Tap Wrench 6" Quick Grip Clamps
instructions. Minimum order is one kit.
Cat No. TR1E Cat No. 506QC
#21 Tin Coated Drill Bit
Cat No. SLD21
CAT. NO. PS1K

CRL Makita Portable Band Saw new

• Variable Speed Dial for Optimum Cutting Speed
• Powerful 6.5 Amp Motor for the Toughest Jobs Bi-Metal Blade
• Belt Lever for Fast and Easy Blade Replacement

This Portable Band Saw cuts up to 4-3/4" (120.7 mm) material to handle most
requirements, and uses standard 44-7/8" x 1/2" (1140 x 12.7 mm) metal cutting blades. The
CRL Cat. No. 792556A Bi-Metal Blade lasts up to three times longer than carbon steel blades.
Cutting speeds range from 200 to 350 feet (61 to 106 m) per minute for common metals
including: aluminum, brass, chrome, copper, iron, mild steel, and stainless steel. CAT. NO. DESCRIPTION
For accurate cuts this tool features dual-bearing blade guides, adjustable stopper plate, 2107FK Portable Band Saw
and a fluorescent job light. Included with the saw is one each Band Saw Blade, Hex Wrench, 792556A Replacement Bi-Metal Blade
Wrench Holder, and a Plastic Case. Minimum order: 1 each.
CRL Makita 10" Compound Miter Saw

• Performs Bevel and Miter Cuts
• Powerful 15 AMP Motor Delivers 4600 RPM
• Weighs Only 25.5 Pounds (11.5 kg) for Easy Portability
This Compound Miter Saw has a dual post compound-pivoting arm that bevel cuts
up to 45 degrees to the left, and miter cuts 0 to 45 degrees on the left and 0 to 52
degrees on the right. This saw has nine positive stops at 15, 22.5, 30, or 45 degrees
right or left, and 0 degrees (90 degree cuts). Includes one 40-tooth Carbide Tipped
Blade, Socket Wrench, Dust Bag, Triangular Rule, and Vertical Vise. NOTE: This
tool is not designed for use with abrasive cut-off wheels. Minimum order is one each. CAT. NO. LS1040
CRL 10" Carbide Tipped CRL 6" Quick-Grip

Saw Blade Bar Clamp
• 100 Teeth for Clean, • Great for Holding
Fast Cuts Cladding in Place
• Superior Cutting of While Adhesive
Aluminum, Copper, Cures
Brass, and Magnesium • Light and Easy
This CRL Carbide Tipped Saw Blade provides fast, clean, and to Handle
smooth cuts, and is perfect for cutting aluminum extrusions, copper,
brass, and magnesium of all types. Blade lubricant, including CRL The pistol-grip handle on this handy 6" (152.4 mm) Quick-Grip
WS140 Tube Wax, must be used for proper results. NOTE: CRL Bar Clamp lets you set it or release it easily with one hand. It’s an
offers Carbide Tipped Blades in 9" to 15" (229 to 381 mm) diameters excellent tool for holding Cladding to Base Shoe while the
to fit most circular, chop, and cutoff saws (go to crlaurence.com). adhesive sets. Large, pliable pads won’t mar work surfaces.
Minimum order is one each. Light and easy to handle. Minimum order is one each.
CAT. NO. CSAW10X100 CAT. NO. 546QC
CRL 27/64" Steel Drill CRL 1/2" #13 Steel Tap new
This 27/64" Steel Drill is used with our Cat. No. 151213 1/2"-13 This 1/2"-13 Steel Tap is designed for use into steel substrate
Tap when prepping CRL Base Shoes for installation of CRL when prepping CRL Base Shoe for installation of CRL SHCS12X34
SHCS12X34 and SHCS12X1 Socket Head Cap Screws (see and SHCS12X1 Socket Head Cap Screws (see page R815).
page R815). Minimum order is one each. Minimum order is one each.
CAT. NO. 6012764 CAT. NO. 151213

CRL Wet Glaze Pump and Accessories

• Portable, Lightweight, Compact Delivery
System for Expanding Cement
• Dramatically Increases Speed of Application
• On/Off Control at Point of Delivery
• Quick and Easy Hose Replacement See the CRL73 Master
Catalog for our complete
When CRL decided to enter the Glass Rail market, we went
at it in typical CRL fashion and asked the question "How can
we improve on the antiquated processes and equipment CAT. NO. GRP1 Wet Glaze Pump
currently being used to benefit our customers"? So when it Pump Kit Includes: One Pump with Hoses, One Nozzle, One Momentary ON/OFF
Switch, Two 5 Gallon Buckets, Two Measuring Pitchers, One Plastic Scoop, One Mixing
came time to look at the way that the Expanding Cement was Spoon, One GF1 15A Ground Fault Interrupt Device, and One GRP2 Replacement Hose
being delivered to the Base Shoe, we knew we had to find a Kit. (Clamp and Alignment Fixture and Laser not included.)
better way. We did just that by developing our Wet Glaze Minimum order is one each.
Pump and Accessories.
The Wet Glaze Pump not only increases speed of CAT. NO. GRP2 Replacement Parts Kit for GRP1
Replacement Hose Kit Includes: Hoses, One Nozzle, and Clamps (No ON/OFF Switch).
application dramatically, it also offers superior control over the Details on kit components are available from CRL Technical Sales or at crlaurence.com.
flow rate and delivery location than that of manual applicators. Minimum order is one each.
This unique delivery system utilizes a pair of

rollers fixed to a rotating disk that squeezes the
cement through flexible tubing. Since the tubing
is the only thing to come in contact with the
cement, there are no seals to leak, giving you a
virtually maintenance free pump.
Simply mix your cement in the mixing bucket,
insert the end of the Inlet Hose into the mixture,
and depress the handy ON/OFF Switch located
on the Delivery Nozzle. The Pump will
immediately start to move the cement through
the hose. Purge any excess water from the hose
and release the ON/OFF Switch. You are now
ready to start pumping cement into the Base
Shoe at a rate of 11 feet (3.3 m) per minute.
CRL Pouring Ramp for Base Shoe CRL Dispensing Bottle

Application Using Expanding Cement for Expanding Cement
• Neat and Effective Manual • Ideal for Small, Hard
Delivery of Expanding to Pour Areas
Cement • 32 (946 ml) Ounce
• Shields Gasket Retention Capacity
Groove in Base Shoe
• Wide Delivery This is a durable plastic
squeeze bottle that ideally
The CRL Pouring Ramp provides a Area applies the expanding cement
wide delivery area for mess-free pouring
of Expanding Cement into Base Shoe. to small, hard to pour areas.
It shields the gasket retention groove area This clean and neat
in the Base Shoe, thereby eliminating Dispensing Bottle saves you
further clean up. You will find the Pouring clean up time on the job, and
Ramp to be a neat and effective method makes spot pours easy. Bottle
to manually deliver the Expanding capacity is 32 fluid ounces
Cement used in our Wet Glaze System. (946 ml). Minimum order is
Minimum order is one each. CAT. NO. GRP35 one each. CAT. NO. GRP36

CRL Kwixset® and Rockite® Expanding Cements

• Expand as They Set
CRL Kwixset® and Rockite® are gray, hydraulic type cements that
expand as they set, and are specially formulated to produce unexcelled Kwixset® for Rockite® for
strength and bonding qualities. When mixed with water they pour into Exterior Applications Interior Applications Only
place smoothly. Both set within 15 to 20 minutes, and when fully cured
develop compression strengths in excess of 8000 pounds per square KWIXSET® CEMENT ROCKITE® CEMENT
inch. CAT. NO. WEIGHT CAT. NO. WEIGHT
Kwixset® is not affected by standing water, making it the right cement KWX25 25 Pounds (11.3 kg) R0CK01 1 Pound (.454 kg)
for exterior use, while the more economical Rockite® is great for any KWX50 50 Pounds (22.7 kg) R0CK05 5 Pounds (2.27 kg)
interior application. Use either product to set railing brackets, and other Minimum order: 1 each. NOTE: Kwixset® can R0CK10 10 Pounds (4.54 kg)
be used in temperatures as low as 40˚F (4˚C).
fixtures because they will not shrink, crack or dry out. R0CK50 50 Pounds (22.7 kg)
Minimum order: 1 each. NOTE: Rockite® can be
used in temperatures as low as 25˚F (-4˚C).
CRL Kwixset® and Rockite® Expanding Cements

BASE SHOE EXAMPLE: #1 For 8 feet (2.4 m) of Base Shoe (both sides)
CEMENT WATER
RUNNING FEET VOLUME OZ. MILLILITERS FLUID OZ. you need 10 pounds of cement and 48 ounces of water
POUNDS PINTS MILLILITERS for the correct mix.
4 (1.2 m) 5 (2.27 kg) 67.6 2000 1-1/2 24 710
8 (2.4 m) 10 (4.54 kg) 135.2 4000 3 48 1420 EXAMPLE: #2 For 12 feet (3.6 m) of Base Shoe (both sides)
12 (3.6 m) 15 (6.80 kg) 202.8 6000 4-1/2 72 2130 you need 6000 milliliters of cement and 2130 milliters of
water for the correct mix.
These mixing proportions are guidelines bases on what we feel is the best way to mix and apply cement, and
we make no guarantee or warranty as to its performance. We suggest you make a sample batch for testing
purposes to determine the exact formula that is right for your application before beginning any job.
CRL Wedgit Glass Centering Springs CRL Bituminous Paint new

• Keeps Glass Centered in Channel • Creates a Barrier Between
Prior to Sealant Application Railing Hardware
• Won't Slip, Slide or Lose Tension and Concrete
• Three Sizes Available W" • Prevents Electrolysis
and Corrosion
1-1/8"
(28.6 mm)
Place on
Each Side
of Glass
CRL Wedgits are steel springs

available in three widths. They are CRL Bituminous Black Paint is used as a barrier to protect
for filling space and centering glass CRL Base Shoe, Posts, Railings, and Stanchions from
panels when installed into channels. CAT. NO. "W" APPROX. QTY/BOX electrolysis and corrosion when embedded in concrete. Simply
By placing Wedgits directly opposite W316 3/16" (4.8 mm) 1500 brush on a clean and dry surface and allow to dry before
each other at regular intervals, the W516 5/16" (7.9 mm) 1000 embedding in concrete. For clean up use Cat. No. MEK1GL.
glass will maintain centered in the W318 3/8" (9.5 mm) 1000 Minimum order is one quart.
channel, promoting a more even Minimum order: 1 pound box. All Wedgits can be combined for
distribution of sealant. quantity pricing. CAT. NO. BC29QT

CRL Wet Glaze Installation Kit CRL Clamp and Alignment Fixture
KIT CONTAINS: • Secures and Aligns the Glass

CRL Clamp and
Alignment Fixture, Laser • Plumb Within 1/32" (.8 mm)
Bracket, Plumb Indicator When Used with Laser
Bracket and Laser of
your choice. Individual • Retains Position Until
parts are also available. Cement Sets
See additional offerings
on this page. The CRL Clamp and Alignment
Fixture is a dual-purpose tool. It not only
aligns the glass, but can also be used to
secure the cladding and hold it in place.
R0B0VWK Complete Kit with R0B0V Laser
A simple turn of the knob moves the
PLS5WK Complete Kit with PLS5 Laser
glass in or out to achieve a plumb
PLS3WK Complete Kit with PLS3 Laser
position. Minimum order is one each. CAT. NO. GRAT1
CRL Laser Bracket and CRL Lasers

Plumb Indicator Bracket
By using the
appropriate Laser CAT. NO.
Bracket and R0B0VP1B
Plumb Indicator
Bracket to match
your laser, the
glass can be
plumbed to within CAT. NO. R0B0V CAT. NO. PLS5 CAT. NO. PLS3
1/32" (.8 mm) Laser Sold
CAT. NO. R0B0VLB Separately Any of the above CRL Lasers, in conjunction with the appropriate
Laser Bracket and Plumb Indicator Bracket, will plumb the Base
CAT. NO. DESCRIPTION Shoe so that the glass will be plumb within 1/32" (.8 mm).
R0B0VP1B Plumb Indicator Bracket for R0B0V
PLS5P1B Plumb Indicator Bracket for PLS5
PLS3P1B Plumb Indicator Bracket for PLS3 CAT. NO. DESCRIPTION
Minimum order: 1 each. R0B0V Robo Vector 5-Way Laser Tool
CAT. NO. DESCRIPTION PLS5 Deluxe 5-Way Laser Tool
PLS3 Standard 3-Way Laser Tool
R0B0VLB Laser Bracket for R0B0V Minimum order: 1 each.
PLS5LB Laser Bracket for PLS5
PLS3LB Laser Bracket for PLS3 For more details on these tools and accessories, visit the CRL
Minimum order: 1 each. web site at crlaurence.com.
CRL Rubber Spacing Block and

Sealing Pad Installation Tool
• Makes Positioning of Spacing Blocks
or Sealing Pads Fast and Easy
Simply push the CRL Rubber Spacing Block, with the adhesive
side out, into the notch at the end of the Installation Tool, and then
remove the release paper. Slip the tool into Base Shoe pocket and
slide it toward the edge of the glass panel. When contact is made
push firmly, and then slide the tool back. The Spacing Block is now
in the proper location. To install Sealing Pads, place them in the
Base Shoe pocket, and then push in place with the tool.
CAT. NO. RSB1T

CRL Dry Glaze Wedge

Removal Tool
• Quickly Removes Aluminum
Wedges From the Base Shoe
A distinct advantage to using the CRL Dry Glaze System
is that you can easily remove damaged or incorrect glass. CRL
Dry Glaze Aluminum Wedges are easily removed with the Wedge
Removal Tool, making glass removal almost effortless, with no
more broken glass and cement. Minimum order is one each.
CRL offers a complete line of tools for the various types of
installations you may encounter. The GWRT1 is used for typical
above floor applications, and the GWRTA Attachment is used for
flush or fascia mount applications.
CAT. NO. GWRT1 WEDGE REMOVAL TOOL FOR ABOVE FLOOR APPLICATIONS
GWRT1 Aluminum Wedge Removal Tool -
Complete Kit: Wedge Tongs, Fulcrum, 42" Lever
GWRT1NT Replacement Tongs for upgrade of old GWRT1
or to replace damaged or lost tongs
ATTACHMENT FOR FLUSH OR FASCIA MOUNT INSTALLATIONS

GWRTA Attachment for Removing Aluminum Wedges in
Flush or Fascia Mount Installations
CAT. NO. GWRT1NT CAT. NO. GWRTA Minimum order: 1 each.
CRL Dry Glaze Wedge Setting CRL Dry Glaze Temporary

Chisel and Hammer Isolator Setting Tool
• Quickly • Allows Glass Panel

Sets the Alignment Without
Aluminum the Use of an
Wedge to Aluminum Wedge
the Desired
Depth When placed between
the Isolator and Base Shoe,
the Temporary Isolator
Setting Tool temporarily
CRL Dry Glaze secures the glass panel in
Aluminum Wedges place. Adjustments required
are easily set using for proper alignment can
the Wedge Setting then be achieved. It can be
Chisel and Hammer. removed simply by rocking it
left to right and pulling on it
lightly. Minimum order is
one each.
GWCH1 Aluminum Wedge Setting Chisel
ST56703 3 Pound Hammer
Minimum order: 1 each. CAT. NO. GWST1

CRL Shimstack Shims 3-1/2"

(88.9 mm)
3/4"
(19 mm)
• Adjustable Size Options Lets You Choose the

Desired Thickness From 1/16" to 1" 1"
(25.4 mm)
• Standard and Extra Long Sizes 3/4"
2" (19 mm)
(50.8 mm) 4-1/8"
Shimstack Shims give you fast, low cost leveling. 16 heat-
1/2" (104.8 mm)
sealed pieces make up one 1" (25.4 mm) stack. Simply snap
1-7/8" (12.7 mm)
off individual shims to get the thickness you need. Made of fire
(47.6 mm)
resistant, non-staining, black color high-impact plastic with an
ASTM rating of 5000 p.s.i. compressive strength. 5/8" 1"
(15.9 mm) (25.4 mm)
1-7/8" 2"
CAT. NO. THICKNESS LENGTH (47.6 mm) (50.8 mm)
KRS16 1/16" (1.6 mm) 3-1/2" (88.9 mm) 5/8"
KRS26 1/16" (1.6 mm) 4-1/8" (104.8 mm) 1/2"
(15.9 mm) 5/8" (12.7 mm)
Minimum order: 1000 shims. Must order in increments of 1000. Sizes can be combined for quantity pricing. (15.9 mm)
CRL Plastic Horseshoe Shims

• 1/16", 1/8", and 1/4" Thicknesses • Color Coded for
• Simplifies All Rail Leveling Requirements Quick Selection
CRL Plastic Horseshoe Shims are made to simplify leveling

problems wherever they occur, and have been approved by
architects for use in the installation of railings, windows, doors,
curtain walls, storefronts, and insulating glass units.
CAT. NO. COLOR THICKNESS "W" WIDTH "L" LENGTH

PHS4 Black 1/4" (6.3 mm) 1-1/2" (38.1 mm) 2" (50.8 mm)
PHS8 Red 1/8" (3.2 mm) 1-1/2" (38.1 mm) 2" (50.8 mm)
Blue 1/16" (1.6 mm) 1-1/2" (38.1 mm) 2" (50.8 mm) L
PHS6
PHS24 Black 1/4" (6.3 mm) 2-5/16" (58.7 mm) 3" (76.2 mm)
PHS28 Red 1/8" (3.2 mm) 2-5/16" (58.7 mm) 3" (76.2 mm)
PHS26 Blue 1/16" (1.6 mm) 2-5/16" (58.7 mm) 3" (76.2 mm)
PHS14 Black 1/4" (6.3 mm) 1-1/2" (38.1 mm) 3-1/2" (88.9 mm)
PHS18 Red 1/8" (3.2 mm) 1-1/2" (38.1 mm) 3-1/2" (88.9 mm) W
PHS16 Blue 1/16" (1.6 mm) 1-1/2" (38.1 mm) 3-1/2" (88.9 mm)
Minimum order: 100 shims. Must order in increments of 100. Sizes can be combined for quantity pricing.
CRL Jumbo Plastic Horseshoe Shims

• New Larger 3" x 4" Size
• Available in Three Thicknesses
• High Impact Stryrene
CRL Jumbo Size Plastic Horseshoe Shims are preferred for use in
larger installations. These high impact styrene Shims are molded to a L
jumbo 3" x 4" (76.2 x 101.6 mm) size in standard thicknesses of 1/4", 1/8"
and 1/16" (6.3, 3.2, and 1.6 mm). Precisely sized and balanced for vertical
and horizontal installation.
CAT. NO. COLOR THICKNESS "W" WIDTH "L" LENGTH

PHS34 Black 1/4" (6.3 mm) 3" (76.2 mm) 4" (101.6 mm)
PHS38 Red 1/8" (3.2 mm) 3" (76.2 mm) 4" (101.6 mm)
PHS36 Blue 1/16" (1.6 mm) 3" (76.2 mm) 4" (101.6 mm) W
Minimum order: 100 shims. Must order in increments of 100. Sizes can be combined for quantity pricing.

CRL Clear Plastic

Horseshoe Shims CRL Clear Plastic Horseshoe Shims are
made to simplify leveling problems wherever
they occur, and have been approved by
• Clear Color Helps Hide Shim architects for use in the installation of railings,
L windows, doors, curtainwalls, storefronts and
• 1/16", 1/8", and 1/4" Thicknesses insulating glass units. CRL Horseshoe Shims
are made of a clear high impact styrene plastic,
CAT. NO. THICKNESS "L" LENGTH "W" WIDTH properly designed and balanced for vertical or
CHS14 1/4" (6.3 mm) 3-1/2" (88.9 mm) 1-1/2" (38.1 mm) horizontal use. Available in three thicknesses
CHS18 1/8" (3.2 mm) 3-1/2" (88.9 mm) 1-1/2" (38.1 mm) 1/16", 1/8", and 1/4" (1.6, 3.2 and 6.3 mm).
CHS16 1/16" (1.6 mm) 3-1/2" (88.9 mm) 1-1/2" (38.1 mm) All sizes have 9/16" (14.3 mm) space between
Minimum order: 100 each. Must be ordered in increments of 100. Sizes can be combined for quantity pricing. W the legs.
CRL Wood Shims CRL Wood Composite Shims

1-1/2"
• Now in White • 35% Better Load (38.1 mm)
Wood or Cedar Support and Snap 5/16"
1-1/2" Four Times Easier (7.9 mm)
(38.1 mm)
Than Traditional
5/16"
(7.9 mm) Wood 8"
(203.2 mm)
8"
(203.2 mm)
This CRL Wood Composite Shim is engineered to high
performance standards with reduced material at natural break-
CRL Wood Shims can be used in so many ways: for leveling points, resulting in less waste while providing great strength.
railing base shoes, door and window frames, cabinets and large Versatile Composite Shims can be used in so many ways: for
appliances; for stirring paints and stains; for spreading mastics and leveling railing base shoes, door and window frames, cabinets
adhesives. They are handy to use, with no more mess of breaking and large appliances; for stirring paints and stains; for spreading
or cutting shingles. New Cedar Shims snap off cleaner, and provide mastics and adhesives. Environmentally friendly, they use no
more rot resistance when used in areas of high moisture. Wood wood from the rain forests or from endangered tree species.
Shims measure 8" (203.2 mm) long x 1-1/2" (38.1 mm) wide. Taper Composite Shims measure 8" (203.2 mm) long x 1-1/2"
is from 5/16" to 1/16" (7.9 to 1.6 mm). (38.1 mm) wide. Taper is from 5/16" to 1/16" (7.9 to 1.6 mm).
CAT. NO. TYPE SHIMS/CTN CAT. NO. TYPE SHIMS/CTN

NWS9 White Wood 420 Shims NWCS8 Wood Composite 32
NWS9C Cedar 432 Shims BWCS8 Bulk Wood Composite 288
Minimum order: 1 carton. Can be combined with all other Wood Shims for quantity pricing. Minimum order: 1 carton. Can be combined with all other Wood Shims for quantity pricing.
CRL Plastic Bearing Shimstrips CRL Aluminum Horseshoe Shims

• High Compressive Strength • Available in Three
• Snap Off to Thicknesses
Required Length for CRL Aluminum Horseshoe
Every Job Shims solve the problem on
construction projects where the
use of Plastic Horseshoe Shims is
restricted. They are fireproof to
regulations and building codes.
CRL Plastic Bearing Shimstrips are intended for use in placing Aluminum Horseshoe Shims are L
and leveling of precast panels and tilt slabs. Just snap off the frequently used with our Aluminum
length you need for each job, and stack to the required thickness. Base Shoe in railing installations. W
CAT. NO. THICKNESS LENGTH WIDTH CAT. NO. THICKNESS "L" LENGTH "W" WIDTH
PBS04 1/4" (6.3 mm) 4" (101.6 mm) 2" (50.8 mm) AHS64 1/4" (6.3 mm) 3" (76.2 mm) 2" (50.8 mm)
Minimum order: 100 each. Must be ordered in increments of 100. Sizes can be combined for quantity pricing. Minimum order: 100 each. Must be ordered in increments of 100. Sizes can be combined for quantity pricing.

CRL RAILING FASTENERS AND ACCESSORIES For Pricing on CRL Products, Call Toll Free
CRL Wedge-Bolt Anchors

Using the proper diameter Insert the Wedge-Bolt Continue tightening the
ANSI Grade drill bit, drill a through the Wedge-Bolt Wedge-Bolt until the
hole into the concrete to a Washer and Base Shoe into Wedge-Bolt and Washer
depth of at least 1/2" the Wedge-Bolt hole. Begin are firmly seated against
(12.7 mm), or one anchor tightening the Wedge-Bolt the Base Shoe while
diameter deeper than the by rotating clockwise and achieving the required
embedment required. applying downward embedment depth. In
Blow the hole clean of pressure. This will engage extremely dense materials,
dust and other material. the first few threads as the use of an impact wrench
1/2"
Wedge-Bolt begins to is recommended.
Clearance
advance.
Wedge-Bolt Anchors achieve their load capacity by the thread CAT. NO. DESCRIPTION QTY/BOX
undercutting the base material. Up to 40 ft./lbs. of torque can be WBA14X3 1/4" x 3" (6.3 x 76.2 mm) Wedge-Bolt Anchor 50
applied in 4000 psi concrete to achieve maximum clamping torque WBAW14* Wedge-Bolt Washer for WBA14X3 50
to the Base Shoe. Wedge-Bolt Anchors are manufactured from WBA38X4 3/8" x 4" (9.5 x 101.6 mm) Wedge-Bolt Anchor 50
heat treated carbon steel, bright zinc plated with a chromate WBAW38* Wedge-Bolt Washer for WBA38X4 50
treatment. NOTE: For correct size Wedge-Bolt Anchors to fit our Minimum order is 50 each. Must be ordered in increments of 50. *Must be used with Wedge-Bolt Anchors to
Base Shoe, see page R539. achieve the required attachment strength of the Base Shoe to the concrete.
CRL Weld Blocks CRL Thread Protecting

CRL Weld Blocks are made of hot
Nylon Allen Screws
Weld Block
rolled steel with a centered 1/2"-13
tapped hole for use with the CRL Base
Shoe. Eliminating the need for drilling
and tapping on job site, when welded to
a structurally sound steel beam or angle, they provide
an attachment point using our pre-drilled Base Shoe
and our Cat. No. SHCS12X34 Stainless Steel Socket
Head Cap Screws. A favorite technique is to attach Thread Protecting Nylon Allen Screws are used to protect the
the Weld Blocks to the Base Shoe, set it in the threaded holes in steel attachments from concrete contamination, and
proper position, and then weld the Weld Blocks to provide a clearance area behind the attachment. Simply insert the Nylon
the beam, angle, or embedment plate. Allen Screws until the top is flush with the steel attachment. Cover with
duct tape to protect the wrench opening. After the steel attachment is
CAT. NO. DESCRIPTION QTY/PACK set in concrete, remove the tape and Nylon Allen Screws so the Base
BSWB12 2-1/2" (63.5 mm) x 2-1/4" (57.2 mm) x 1/2" (12.7 mm) 10 Shoe can be attached.
Use with B5S, B5T, B5L Series Base Shoes.
CAT. NO. DESCRIPTION QTY/CARTON
BSWB712 2-1/2" (63.5 mm) x 2-3/4" (69.9 mm) x 1/2" (12.7 mm) 10
Use with B7S Series Base Shoes. NAS12X1 1/2"-13 x 1" (25.4 mm) Nylon Allen Screws 100
Minimum order: 1 pack. Minimum order is 100 each. Must be ordered in increments of 100.
CRL Socket Head Cap Screws CRL Attaching Bolts and Rivet Nuts
• 304
Stainless
Steel
CAT. NO. ZBOLT CAT. NO. ZRNUT Inserted Compressed
These CRL Stainless Steel Attaching Bolts and Rivet Nuts are
CRL Socket Head Cap Screws are used to secure glass railing designed to work with CRL Z-Series Glass Clamps. The socket
Base Shoe to approved 1/2" (12.7 mm) steel embedment plates head of the Bolt recesses into the base of the clamp, and the
with a minimum 1/2" (12.7 mm) of thread engagement. Cat. No. common 5/16-18 thread and 1" (25.4 mm) length will work with both
SHCS12X34 are also for use with CRL Weld Blocks (see above). Radius Base and Flat Base Clamps. The stainless steel material
provides durability in exterior applications.
CAT. NO. DESCRIPTION QTY/PACK
SHCS12X34 1/2"-13 x 3/4" (19 mm) Socket Head Cap Screw 10
SHCS12X1 1/2"-13 x 1" (25.4 mm) Socket Head Cap Screw 10 ZB0LT 5/16" -18 x 1" (25.4 mm) Socket Head Cap Bolt (Undercut Head)
SHCS12X112 1/2"-13 x 1-1/2" (38.1 mm) Socket Head Cap Screw 10 ZRNUT 5/16" -18 Rivet-Nut for use in Thin Wall Tubing (1/8" or less)
Minimum order: 10 each. Must be ordered in increments of 10. Minimum order: 10 each. Must be ordered in increments of 10.

CRL RAILING FASTENERS AND ACCESSORIES Contact CRL Tech Sales for complete planning
CRL Self-Tapping Rail Connecting Block and Rail Fastening Screws

• For ARS Series Railings CAT. NO. RCBS CAT. NO. TEK1
#10 x 2" #8 x 3/4"
• Easy to Use Square
Rail Connecting Rail Fastening
Drive Screw Heads Block Screw Screw CAT. NO. 9502
• Stainless Steel
Square Insert Bit
CAT. NO. DESCRIPTION SIZE For use with CRL ARS Aluminum Series Rail Systems. Use Cat. No. RCBS
RCBS* Rail Connecting Block Screw #10 x 2" (50.8 mm) Screws for fastening Connecting Blocks. For fastening Aluminum Railings use Cat.
TEK1* Rail Fastening Screw #8 x 3/4" (19 mm) No. TEK1 Screws. Both are stainless steel with special crosscuts that allow them to
9502** Square Insert Bit for Screws 1/8" (3 mm) tap their own threads in aluminum. Screws require our Cat. No. 9502 1/8" (3 mm)
*Minimum order: 50 each. Must be ordered in increments of 50. **Minimum order: 1 each. size Square Insert Bit to install.
CRL Color Match Bolt Cover Buttons new CRL Stainless Steel Washer
COLOR
Button Diameter:
1-3/16" (30.1 mm)
Button
Snaps Button Height:
on Washer 3/8" (9.5 mm)
Install Snap
Anchor Button
and on
Washer Washer
CAT. NO. COLOR 1" (25.4 mm) Diameter
BTN1W Sky White
CRL Color Match Bolt Cover Buttons in seven BTN10W Oyster White
standard colors are designed to cover up exposed BTN1AGY Agate Gray
Concrete Anchors and Lag Bolts on Vertical Post BTN1BGY Beige Gray This is a 1" (25.4 mm) diameter Stainless Steel Washer
Base Plates. Cover Buttons easily snap over Cat. No. BTN1BL Matte Black with a 7/16" (11 mm) hole and 1/8" (3.2 mm) thickness.
WSHR1 Stainless Steel Washers to create a finished BTN1BRZ Matte Bronze It is designed to accept CRL Color Match Bolt Cover
look. See page R759 for color chart. Minimum order BTN1GRN Forest Green Buttons. Minimum order is 50 each.
is 50 each. Must be ordered in increments of 50. BTN1DS Dark Silver Must be ordered in increments of 50. CAT. NO. WSHR1
CRL Lag Bolts CRL Base Plate Screws

Post
Base Plate
BPS112
Screws
CAT. NO. LB350 CAT. NO. LB600 CAT. NO. BPS112

3/8" (9.5 mm) x 3/8" (9.5 mm) x #14 x 1-1/2"
6" (152.4 mm) Long (38.1 mm) Long
3-1/2" (89 mm) Long
These CRL Base Plate Screws are Stainless Steel, and
CRL Stainless Steel Lag Bolts are perfect for attaching Vertical Post Kits to designed to secure Square Base Plates into the raceways of
a wooden substrate. Use them with Cat. No. WSHR1 Stainless Steel Washers Vertical Posts. This Flat Phillips Head Tapping Screw fits
and Cat. No. BTN1 Color Match Bolt Cover Buttons to create a beautiful flush beneath each Base Plate. Minimum order is 50 each.
finished look. Minimum order is 20 each. Must be ordered in increments of 20. Must be ordered in increments of 50.
CRL Wedge-Bolt Anchors CRL Stainless

CRL Wedge-Bolt Anchors Steel Anchors
are made of heat-treated
carbon, and are ideal for use
with all CRL Aluminum
Railings to attach Vertical
Posts to the substrate. Use CAT. NO. CA325
1/4" (6.3 mm) x
them with Cat. No. WSHR1 3-1/4" (82.5 mm) Long
Stainless Steel Washers and
Cat. No. BTN1 Color Match
Bolt Cover Buttons to create CAT. NO. SIZE LENGTH CRL Stainless Steel Anchors are another option for attaching
a beautiful finished look. WBA14X3 1/4" (6.3 mm) 3" (76.2 mm) Vertical Posts to the substrate. Use with Cat. No. WSHR1
Minimum order is 50 each. WBA38X4 3/8" (9.5 mm) 4" (101.6 mm) Stainless Steel Washers and Cat. No. BTN1 Color Match Bolt
Must be ordered in WBA12X4 1/2" (12.7 mm) 4" (101.6 mm) Cover Buttons to create a beautiful finished look. Minimum
increments of 50 each. Sizes can be combined for quantity pricing. order is 20 each. Must be ordered in increments of 20.

CRL Flat Head Phillips Screws

• For Use With CRL Hand Rail
new
Brackets and Fittings
Flat Phillips Tapping
CAT. NO. SIZE FINISH
10X112FHPBS #10 x 1-1/2" (38.1 mm) Brushed Stainless
10X112FHPPS #10 x 1-1/2" (38.1 mm) Polished Stainless
10X112FHPPB #10 x 1-1/2" (38.1 mm) Brass Plated
12X2FHPBS #12 x 2" (50.8 mm) Brushed Stainless

12X2FHPPS #12 x 2" (50.8 mm) Polished Stainless
12X2FHPPB #12 x 2" (50.8 mm) Brass Plated
Minimum order: 100 each. Must order in increments of 100. All bulk screws can be combined for quantity pricing.
CRL 8-18 x 3/4" Self-Drilling CRL 8-18 x 3/4" Self-Drilling

Pan Head Phillips Screws new Flat Head Phillips Screws new
• Five Architectural • Cut Their Own Holes
Finishes in a Variety of Metals
CAT. NO. FINISH

8X34PHPSDBS Brushed Stainless
8X34PHPSDPS Polished Stainless
8X34PHPSDPB Brass Plated
CAT. NO. FINISH
8X34PHPSDSA Satin Anodized
8X34PHPSDDU Dark Bronze 8X34SFPTS Stainless Steel
Pan Phillips Self-Drilling Flat Phillips Self-Drilling
Minimum order: 100 each. Must order in increments of 100. Minimum order: 100 each. Must order in increments of 100.
All bulk screws can be combined for quantity pricing. All bulk screws can be combined for quantity pricing.
CRL End Cap Screws for CRL Replacement Screw Packs for
Aluminum Railings Bar Mount Foot Railing Brackets
These Stainless Steel Flat Head CRL Replacement
Phillips Screws fit into the raceways Screw Packs for Bar
of our Aluminum Top Rails. Can be Top Rail Mount Foot Railing
End Cap
used with either Decorative or Wall Brackets come in
Mount End Caps in all series of CRL End Cap finishes to match the
Aluminum Railings. Screw Brackets. Packs
Post include:
CAT. NO. SIZE
ECS1 #12 x 3/4" (19 mm)
Minimum order: 50 each. Must order in increments of 50.
• 1 Each 5/16" - 18 x 3" (76.2 mm) Allen Screw
CRL Picket Screws • 1 Each 12 x 2" (50.8 mm) Flat Head Phillips Screw
• 2 Each 12 x 3/4" (19 mm) Flat Head Phillips Screw
• 1 Each 7/8" (22.2 mm) Diameter Flat Washer
Stainless Steel Pan Head • 1 Each Spring Lock Washer
Phillips Screw fits in the screw • 1 Each 5/16"-18 Hex Nut
race of both our Round and
Square Aluminum Pickets. CAT. NO. FINISH See page R797 for
Bar Mount Foot
RSP4BS Brushed Stainless Railing Brackets
CAT. NO. SIZE RSP4PS Polished Stainless
PKTS2 #10 x 5/8" (15.9 mm) RSP4PB Brass Plated
Minimum order: 50 each. Must order in increments of 50. For Both Round or Square Pickets Minimum order: 1 pack.

CRL Stainless CRL Stainless

Steel Concrete Steel Hanger
Anchors Bolts
• For Use With • For Use With
HRS Hand CAT. NO. THREAD SIZE LENGTH HRS Hand CAT. NO. THREAD SIZE LENGTH
Rail Brackets CA3817 5/16"-18 1-7/8" (47.6 mm) Rail Brackets HB516212S 5/16"-18 2-1/2" (63.5 mm)
CA1222 3/8"-16 2-1/4" (57.1 mm) HB383S 3/8"-16 3" (76.2 mm)
Minimum order: 1 each. Can be combined for quantity pricing. Minimum order: 1 each. Can be combined for quantity pricing.
CRL Stainless CRL Stainless

Steel Allen Steel Threaded
Screws Rods
• For Use With CAT. NO. THREAD SIZE LENGTH • For Use With
HRS Hand AS1032316 10-32 3/16" (4.8 mm) HRS Hand
and Foot AS142014 1/4"-20 1/4" (6.3 mm) Rail Brackets
AS516112 5/16"-18 1-1/2" (38.1 mm)
Rail Brackets AS516134 5/16"-18 1-3/4" (44.5 mm)
AS5162 5/16"-18 2" (50.8 mm) CAT. NO. THREAD SIZE LENGTH
AS5163 5/16"-18 3" (76.2 mm) TR51618X36S 5/16"-18 36" (914 mm)
AS38112 3/8"-16 1-1/2" (38.1 mm) TR3816X36S 3/8"-16 36" (914 mm)
Minimum order: 1 each. Can be combined for quantity pricing. Minimum order: 1 each. Can be combined for quantity pricing.
CRL Replacement Screw Packs for Hand Rail Brackets new RSP3 Pack
Each pack contains: Two
each 8-18 x 3/4" (19 mm)
RSP1 Pack Self-Drilling Phillips Flat
Each pack contains: Two Head Screws and One
each 8-18 x 3/4" (19 mm) each 5/16" -18 x 2-1/2"
Self-Drilling Phillips Flat (63.5 mm) Hanger Bolt.
Head Screws and One
each 3/8" -16 x 3" RSP5 Pack
(76.2 mm) Hanger Bolt. Each pack contains: Two
each 8-18 x 3/4" (19 mm)
Self-Drilling Phillips Flat
Head Screws and Three
RSP2 Pack each 12 x 2" (50.8 mm)
Each pack contains: Two Phillips Flat Head Screws.
each 8-18 x 3/4" (19 mm)
Self-Drilling Phillips Flat
Head Screws and One
each 3/8" -16 x 1-1/4"
(31.8 mm) Allen Screw.
BRUSHED POLISHED BRASS SATIN DARK

STAINLESS STAINLESS PLATED ANODIZED BRONZE FITS CRL HAND RAIL SERIES
CAT. NO. CAT. NO. CAT. NO. CAT. NO. CAT. NO.
RSP1BS RSP1PS RSP1PB RSP1SA RSP1DU HR2SW and HR2DW
RSP2BS RSP2PS RSP2PB RSP2SA RSP2DU HR2SP See pages R668 to R672
RSP3BS RSP3PS RSP3PB ---------- ---------- HR15T, HR20T, HR15B3, and HR20B3 for complete selection of
RSP5BS RSP5PS RSP5PB ---------- ---------- HR15B4, HR20B4, HR15WA, and HR20WA Hand Railing Brackets
Minimum order: 1 pack.
CRL Replacement Gaskets and Grommet Packs for Hand Rail Brackets
HR15G, HR20G, HR15GA, and HR20GA Series HR2DG Series
new
CAT. NO. RGGP1 CAT. NO. RGGP2

Each CRL Replacement Gasket and Grommet Pack includes two Each CRL Replacement Gasket and Grommet Pack includes two
each 2-5/16" (58.7 mm) diameter Rubber Gaskets and one each 1/2" each 2-5/16" (58.7 mm) diameter Rubber Gaskets and one each
(12.7 mm) Plastic Grommet. Minimum order is one pack. 11/16" (17.5 mm) Plastic Grommet. Minimum order is one pack.

CRL A-T Series Steel Insert Fasteners

• Blind Installation (Installs From
One Side of Work) for Light
to Medium Duty Fastening
• The Unique Method of Installing
Load Threads in Virtually Any
Material: Aluminum, Magnesium,
Steel, Cast Iron, Plastics,
Fiberglass, or Hardboard
• Reduces Inventory Because One
Insert Works in Any Thickness A-T Series Steel Insert Fastener installed in Square Tubing
Above .030" (.76 mm)
• Vibration Proof A-T Series Steel Insert Fastener Installation
• Use to Install Z-Clamps

to Posts Sleeve
Break
Features: Area
• Wear resistant threads due to Nut
unique mechanical properties Portion
of installation
• No special skills are required – A-T Series Insert Fasteners are A rotating tool mandrel The nut portion expands
installation can be learned a one-piece design consisting exerts a pull and "breaks" the sleeve, exerting a 360
in minutes of a nut portion and a sleeve portion. the nut portion from the sleeve, degree swage fit against
• Ideal for high-speed drawing it into the sleeve. the parent material.
production.
Can be installed at rates
up to 500 pieces per hour
• Steel Insert Fasteners
self-tighten with repeated use
• Use in standard drilled or
punched holes
• No deburring necessary Drill Drill
Hole Hole
• Can be installed at any point Size Size
of the assembly operation "H" "H"
with portable tools
• Can be installed after painting
or plating
• Metric and other sizes, Chart below calls out Drill Hole Size
aluminum, brass or stainless
steel available on special order "DH"
Minimum Hole Depth
CRL A-T Series Steel Insert Fasteners can be used in light and medium duty fastening applications. They can be installed into thinner
materials with greater ease than can be accomplished with weld nuts, pierce nuts, clinch nuts, thread tapping, and thread forming screws.
They are "non-grip sensitive", one Steel Insert Fastener part number per thread size accommodates any grip over .030" (.76 mm), eliminating
the need for various grip ranges.
The unique feature of CRL A-T Series Steel Insert Fasteners is the axial knurl under the flange of the insert. The expansion of the sleeve
causes the knurl to bite into the parent material, providing greater torque resistance. Use CRL A-T Series Steel Insert Fasteners to improve
your product and speed up production. They're ideal for high-speed installations, as well as low volume applications using manual tools.
"DH" "H" - MATCH METAL THICKNESS BELOW AND USE DRILL SIZE LISTED
CAT. NO. THREAD SIZE QTY/BOX MIN. HOLE DEPTH .030-.090 .091-.124 .125-.186 .187-OVER
ATS2440 #4 (.112) – 40 100 .390" (10 mm) 3/16" #10 #10 #9
ATS2632 #6 (.138) – 32 100 .390" (10 mm) 7/32" #2 #1 #1
ATS2832 #8 (.164) – 32 100 .390" (10 mm) 1/4" 1/4" 17/64" 17/64"
ATS21032 #10 (.190) – 32 100 .390" (10 mm) 9/32" 19/64" 19/64" 19/64"
ATS2420 1/4" (.250) – 20 100 .535" (13.6 mm) 3/8" 3/8" 25/64" 25/64"
ATS2518 5/16" (.312) – 18 100 .635" (16.2 mm) 1/2" 1/2" 33/64" 33/64"
Minimum order: 100 each. Sizes can be combined for quantity pricing.

CRL A-T Series Master Assortment Kit

• A Complete Kit With Six Sizes
of Steel Insert Fasteners,
Deluxe Hi-Torquer Hand Tool,
and Adapter Heads
See the CRL73 Master
Use the CRL A-T Series Master Assortment Kit to install load Catalog for our complete
bearing threads in virtually any material. It is ideal for production
and maintenance repair applications.
COMPLETE KIT INCLUDES:
The Kit contains: one AA112 A-T Series Deluxe Hi-Torquer
50 each of these A-T Series One of each of these A-T
Hand Tool, 50 each of six different sizes of A-T Series Steel
Steel Insert Fasteners: Series Conversion Adapters:
Insert Fasteners, and one Conversion Kit for each thread size
with complete installation instructions. ATS2440 #4-40 AAT202440 #4-40
All of this comes in a rugged polyethylene case ready for use ATS2632 #6-32 AAT202632 #6-32
under the harshest of conditions, in the plant or in the field. ATS2832 #8-32 AAT202832 #8-32
ATS21032 #10-32 AAT2021032 #10-32
CAT. NO. DESCRIPTION ATS2420 1/4"-20 AAT202420 1/4"-20
A-T Series Master Assortment Kit ATS2518 5/16"-18 AAT202518 5/16"-18
AAT312A
Minimum order: 1 each. One AA112 Hi-Torquer Hand Tool.
CRL A-T Series Deluxe INSTALLATION:

• Thread insert fully onto mandrel.
Hi-Torquer Hand Tool • Place into hole.
• Hold grip bar while turning the
"T" handle clockwise until insert
is installed.
• Can Be Used to Set All Sizes of • Turn "T" handle counter-clockwise
A-T Series Steel Insert Fasteners to remove from insert.
The CRL A-T Series Deluxe Hi-Torquer Hand Tool is used to set all sizes of
A-T Series Steel Insert Fasteners simply by using the appropriate Adapter to
change from one thread size to another.
The Tool features a patented Quick Change thread size nose assembly. There
is a recess to accept a 1/4" (6.3 mm) socket drive. NOTE: Be sure to order an
Adapter Kit (see below) for each Insert Fastener size you plan to use.

AA112 A-T Series Deluxe Hand Tool
CRL A-T Series Adapters for Hand Tool

• Order One for Each Steel Insert
Fastener Size You Use
Use these CRL A-T Series Adapters to set all sizes of
A-T Series Steel Insert Fasteners with the Cat. No. AA112
A-T Series Hand Tool. They feature quick and easy
conversions from one thread size to another.
CAT. NO. FITS THREAD SIZE Hand Tool

sold separately
AAT202440 #4-40 (see above)
AAT202632 #6-32
AAT202832 #8-32
AAT2021032 #10-32
AAT202420 1/4"-20
AAT202518 5/16"-18

CRL Stainless Steel Cables

• For Use With All CRL Railing Systems
• 1/8" and 3/16" (3.2 and 4.8 mm)
Diameter 1 x 19 Type 316 Stainless
Steel Construction Cables
• Uncoated and Low Maintenance 1/8" (3.2 mm) 3/16" (4.8 mm)
Diameter Diameter
CRL Stainless Steel Cable is an infill option for any
of our railing systems. Recommended spacing between
cables is 3" (76.2 mm) center-to-center. The 1 x 19
construction cables are engineered to hold static loads CAT. NO. CBL18 CAT. NO. CBL316
without stretching, and is relatively stiff. Order cable in
spools, or we can custom cut it to your desired length.
CRL 1 x 19 Construction Stainless Steel Cable is designed with 19 separate wires twisted into
Roll length is 250 feet (76.2 m). Minimum order is one a single strand. See page R822 for Cable Installation Tools
roll. For Pre-Cut Cable Kits see pages R648, R714.
CRL Push Lock Fittings

• For Use With 1/8" and 3/16"
new CRL Tensioning Receivers
• For Use With 1/8" and 3/16"
(3.2 and 4.8 mm) Diameter (3.2 and 4.8 mm) Diameter
1 x 19 Type Cable 1 x 19 Type Cable
1-9/16" 2-3/8"
(39.7 mm) (60.3 mm)
7/16" 7/16" 9/16"

17/32"
(11.1 mm) (11.1 mm) (14.3 mm)
(13.5 mm)
The CRL Tensioning Receiver is a tensioning device hidden

The CRL Push Lock Fitting is designed to rest in a hole in the inside the end posts, with only the head of the Receiver exposed
end post. When used with an end post 1-1/2" (38.1 mm) or more on the outside of the post. It allows the Cable to be adjusted
in thickness, the Push Lock Fitting is hidden inside the end post, between spans. The inside is female-threaded to accept the
with only the head exposed on the outside. A plastic washer is male-threaded Cat. No. SWGST Swaging Stud that is attached
included and acts as a scratch resistant barrier between the to the Cable. Requires 3/16" hex wrench to fasten. 7/16" (11 mm)
Push Lock Fitting and post. diameter clear hole is required when drilling post for fitting.
CAT. NO. FITS CABLE DIAMETER DESCRIPTION CAT. NO. FITS CABLE DIAMETER DESCRIPTION
PL4SS 1/8" (3.2 mm) Push Lock Fitting TENRR1 1/18" (3.2 mm) Tensioning Receiver
PL6SS 3/16" (4.8 mm) Push Lock Fitting TENRR2 3/16" (4.8 mm) Tensioning Receiver
CRL Swaging Stud Fittings CRL Ferrule Fittings

• For Use With • For Fixed,
1/8" and 3/16" Non-Tensioning 1-3/16"
1-1/8"
(3.2 and 4.8 mm) (28.6 mm)
End of 1/8" and 3/16" (20.6 mm)
Diameter 1 x 19 (3.2 and 4.8 mm)
Type Cable Diameter 1 x 19 7/16"
(11.1 mm)
Type Cable
9/16"
Swaged on the end of the Stainless Steel Cable, this part is used (14.3 mm)
with the Cat. No. TENRR Tensioning Receiver. When installed, it
When installed, the Ferrule Fitting is hidden inside the
is completely hidden inside the Fitting so you will never see any
end post, with only the head exposed on the outside of the
unattractive swaging marks. The threaded surface is coated with
post. After it's installed, it looks the same as the Tensioning
a baked-on, molybdenum-based dry film lubricant to prevent the
Receiver, located in post. This Fitting must be installed using
threads from galling when tensioned and in extreme environments.
a Swager Tool (see page R822).
CAT. NO. FITS CABLE DIAMETER DESCRIPTION CAT. NO. FITS CABLE DIAMETER DESCRIPTION
SWGST1 1/8" (3.2 mm) Swaging Stud Fitting FXFRL1 1/8" (3.2 mm) Ferrule Fitting
SWGST2 3/16" (4.8 mm) Swaging Stud Fitting FXFRL2 3/16" (4.8 mm) Ferrule Fitting

• Everything for Installing Stainless Steel Cable

CRL Cable Installation Tools • Get Additional Information at crlaurence.com
Cable Grip Locking Pliers Cable Cutter
CRL Cable Grip Locking Use CRL Cable
Pliers with machined jaws to Cutters for burr-free
grip the cable as you are cutting of cable. Cuts
tensioning it. Prevents cable up to 1/4" (6.3 mm)
damage to the cable while in diameter. Minimum
being tensioned. Minimum order is one each.
order is one each.
CAT. NO. CBLGP1 CAT. NO. CBLCTR1
Pre-Tensioner Locking Pliers Cable Tensioning Gauge

The CRL Pre-Tensioner Use this CRL Cable
can be used when installing Tensioning Gauge to
longer runs of cable. The accurately check the
tool allows you to tension tension on 1/8" (3.2 mm)
the cable through the last diameter cables typically
intermediate post, making it installed in Cable Railing
easy to connect to the last Systems. Minimum order
end post. Minimum order is is one each.
one each.
CAT. NO. CBLPT1 CAT. NO. CBLTG1
CRL Cable Swager Installation Tool Kit See the CRL73

Master Catalog
for our
complete
selection of
quality tools
Kit Includes:
• Air Over Hydraulic Pump
• Air Hoses and Fittings
• Cable Grip Locking Pliers
• Cable Cutter
• Hand Held Swager
• Grommet Tool Set
Air Over Hydraulic Pump Cable Grip Locking Pliers Cable Cutter
• Allen Wrenches
• Safety Glasses
• Radius Ferrule/Clip On
Stop Gauge
• Tool Box
Hand Held Swager Radius Ferrule/Clip On Stop Gauge Tool Box with Lock and Key
NOTE: Air Over Hydraulic Pump requires an air compressor capable of delivering at least 20 CFM and
120 P.S.I. at the air inlet on the box. Minimum 1/4" (6.3 mm) I.D. air hose with a 1/4" male pipe thread
required (not included). CAT. NO. CBLS1K

CRL MAINTENANCE PRODUCTS For Pricing on CRL Products, Call Toll Free
CRL Cleaning and Polishing Products Give Your

Railing Projects a Perfect Finishing Touch
Give your railing projects a perfect finishing touch with CRL's complete assortment of quality
cleaning and polishing agents for glass, aluminum, and stainless steel. These easy to apply,
hard-working products are formulated to give you bright, squeaky-clean surfaces.
Our glass cleaners have been the standard of the glass industry for decades. Hard water
spots and stains can dull the finish of glass and metal surfaces, but with our water spot removers
you can make them look like new again. We also offer cleaners and degreasers to polish and
protect metal surfaces. And if your aluminum railings suffer a chip or scratch we can remedy
those as well with our Lacquer Blend Touch-Up Paints. View or download our CRL73
Doing a good cleaning job is always easier with the right tools. Our professional strength Lint Master Catalog online at
Free Wipes clean surfaces without streaking, and absorb moisture faster than traditional paper crlaurence.com
towels. Our plastic scrapers and razor blades can be used on surfaces that might be damaged
by conventional metal scraper blades. These, and other fine cleaning products, can be seen in
our CRL73 Master Catalog, or in the Online Catalog at crlaurence.com.
• Aerosol and Concentrate Glass Cleaners • Water Spot and Stain Removers
• Metal Cleaners, Degreasers, and Polishes • Paper and Fiber Wipes
• Professional Touch-Up Paints • Cleaning Tools

CRL MANUFACTURING Contact CRL Tech Sales for complete planning
• Making Quality Products

for Almost 40 Years
• User of Progressive QS-9000
Manufacturing Processes
• Mechanical and Technical
Expertise Available to Assist
Your Manufacturing Processes 270,000 square feet of manufacturing capacity
Meeting Your Manufacturing Needs

C.R. Laurence can meet the manufacturing needs of businesses big and small.
We offer a variety of services to help you produce high quality products you will be
proud to put your name on. Progressive QS-9000 manufacturing processes are
used to make quality tools, parts, and accessories for some of the world’s largest
corporations. We also serve the needs of smaller, more specialized businesses.
CRL will help you make products you can provide to your customers with complete
confidence.
Cutting services are available Our computerized CNC Machines
for production runs or custom make custom drilling and
What We Can Offer order jobs machining services possible
Our capabilities encompass most every phase of the manufacturing process,

from the early stages of design, all the way through to packaging and shipment.
We can supply services such as:
Engineering • Cutting • Drilling • Machining • Welding • Cladding
Painting • Polishing • Assembly • Packaging • Shipping
Interested? Contact Us
We welcome the opportunity to serve you, and are committed to providing your
business with the services that produce quality products. To discuss the possibility The Sheet Metal Department's Our Paint Lines can apply
of working with CRL Manufacturing we invite you to contact CRL Technical Sales CNC Brake Press and Shear architectural and industrial
does custom metal cladding powder coated finishes to
at (800) 421-6144 in the U.S., (877) 421-6144 from Canada, or (323) 588-1281 parts up to 25 feet in length
International. Ask for Ext. 7700. For e-mail, go to crlaurence.com, click on Contact
Us, and then click on Technical Sales.
• CRL Products are Distributed Through

Glass Temperers and Fabricators

CRL TECHNICAL ASSISTANCE For Pricing on CRL Products, Call Toll Free
CRL Technical Assistance

• Full Service From Our Railing Technical Sales Team
• Design Assistance and Component Selection
• Detailed Project Quotes
The C.R. Laurence Railing Technical Sales Team can help you choose the
perfect railing system for any job. They can prepare a detailed quote that you
can present to your client with the full assurance that the CRL Rails they select
will enhance the beauty and safety of the surroundings. And they will assist
with component selection to ensure you can complete the job with a minimum
amount of excess material. Your job can be made easier with the help of our
trained professionals. CRL Railing Technical Sales can be reached Monday
through Friday from 6 a.m. to 5 p.m. Pacific Time.
Call (800) 421-6144 in the United States, (877) 421-6144

from Canada, or (323) 588-1281 International.
Ask for Railing Technical Sales at Ext. 7730
Direct Fax (800) 587-7501 or (323) 584-5289
Direct E-Mail [email protected]
To view or place an order for any CRL product visit our
Online Catalog at crlaurence.com
Let CRL Design and Engineer Your Next Project

• Design and Development of Custom Products
• Product Management Service
• Auto Cad Drawings
• Shop Drawings
• Engineering
• Technical Support
Let CRL's Railing Technical Sales Team help you with your next rail project.
Everyone at C.R. Laurence is dedicated to providing superior customer service,
along with products and resources to keep our customers on the cutting edge of
technology. We have added a dedicated Computer Aided Drafting (CAD)
Department to our arsenal of Technical Sales and Engineering groups to assist
you with drawing submittals and custom design work to land that special project.
Drawings and Specifications-How to Get Them

Let CRL be a Team Player on All Your Railing Hardware Projects!
C.R. Laurence Company is proud to announce our web site is designed for easy access
to product information and drawings alike! Simply click on "Architectural Customers" on the
crlaurence.com home page and you will find products listed by CSI section for easy
reference. Each product will have links for technical drawings and written product
specifications, which can be easily downloaded into your own working documents.
Never before have product submittals to architects and general contractors been so
easy. CRL wants you to succeed, and by teaming together your projects will run smooth,
on time, and within budget!

PHONE, FAX AND E-MAIL DIRECTORY Contact CRL Tech Sales for complete planning
Ask for Extension

Customer Service
Order Desk
•Get Product Information
•Request Price Quotes
5275 Direct Fax
•Check Stock Availability (800) 262-3299
CRL63 CRL53 CRL23
Direct E-Mail
•Place or Trace Orders [email protected]
•Check Your Account Status
Customer Service / Order Desk hours are 6 am to 5 pm (Pacific Time)
Monday through Friday, and 7 am to 12 pm Saturday. If you wish to pick up
your order at the Will Call counter of our regional warehouses the hours are
8 am to 5 pm Monday through Friday, and 8 am to 12 pm Saturday. For
the fastest Will Call service be sure to place your order in advance so we
can have it ready upon your arrival. CRL73 CRL83 CRL43
Technical Sales Business Groups

Architectural Railings
Ask for Extension
•Aluminum Railing Systems
•Cap Railing Systems
•Hand Railing Systems
•Post Railing Systems
7730
Direct Fax (800) 587-7501
•Windscreen and Gate Systems Direct E-Mail [email protected]
•Heavy Glass Base Shoe HR09
Architectural Hardware
Ask for Extension
•Architectural Storefronts
•'All-Glass' Entrance Systems
•Door and Sidelite Rails
•Glass Walls and Partitions
7700
Direct Fax (800) 587-7501
•Structural Glass Fittings
•Door Controls CRL63
Architectural and Ornamental Metals

Ask for Extension
•Clad Entrances and Storefronts
•Canopies and Sunshades
•Metal Wall Panels
•Column Covers
7770
Direct Fax (866) 921-0532
•Ornamental Hand and Guard Rails
•Break Shaped Metals AH07
Ask for Extension

Online Assistance United States (800) 421-6144
by Telephone: Canada (877) 421-6144
International (323) 588-1281 6200
LOG ON TO crlaurence.com A N D C L I C K O N C O N TA C T U S T O R E A C H A N Y C R L D E PA R T M E N T
PHONE, FAX AND E-MAIL DIRECTORY For Pricing on CRL Products, Call Toll Free
Technical Sales Business Groups

Frameless Shower Door Ask for Extension
•Hinges and Clamps

•Knobs and Pull Handles
•Towel and Grab Bars
•Sliding Shower Enclosures
7740
Direct Fax (800) 458-7496
•Vanity and Wardrobe Mirrors
CRL23
Glass and Glazing Ask for Extension
•Mirror and Glass Hardware

•Door and Window Hardware
•Retail Display Hardware
•Glazier's Tools and Machinery
7720
Direct Fax (866) 921-0531
•Sealants, Adhesives, and Fasteners Direct E-Mail [email protected]
CRL53
Hospitality and Service Ask for Extension

•Partition Posts and Booth Dividers
•Food Service Sneeze Guards
•Tray Slide Hardware
•Menu Boards
7760
Direct Fax (800) 587-7501
•Standoffs and Glass Connectors Direct E-Mail [email protected]
HS07
Transaction and Security

•Drive-Thru and Walk-Up Windows Ask for Extension
•Bullet Resistant Exchange Windows
•Ticket and Cashier Windows
•Cash Tray and Deal Drawers
•Speak-Thru Devices
7760
Direct Fax (800) 587-7501
•Safety and Security Mirrors Direct E-Mail [email protected]
TH04
Automotive Ask for Extension

•Truck Sliding Rear Windows
•Pop-Up and Electric Sunroofs
•Van and RV Windows
•Auto Glass Shop Products
7780
Direct Fax (800) 845-4532
•Auto Glass Tools Direct E-Mail [email protected]
CRL43
Online Assistance by E-Mail: [email protected]

LOG ON TO crlaurence.com A N D C L I C K O N C O N TA C T U S T O R E A C H A N Y C R L D E PA R T M E N T
HR09 CATALOG A TO Z PRODUCT INDEX
A C Ferrule Fitting for Cable . . . . . . . . . . . . . . . .R649, R715, R821
ACRS Cable Installation Tools . . . . . . . . . . . . . . . . . . . . . . . . . . .R822 Flanges for Hand Railing . . . . . . . . . . . . . . .R647, R664, R745
Adaptors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R742-R744 Cap Fasteners for Spider Fittings . . . . . . . . . . . . . . . . . . .R623 Flat End Caps for Hand Railing . . . . . . . . . . . . . . . . . . . .R654
Drilling Jig . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R745 Cap Light, Aluminum Railing . . . . . . . . . . . . . . . . . . . . . .R732 Flat Hand Rail Adapter Brackets . . . . . . . . . . . . . . .R670-R671
Replacement Fastener Kit . . . . . . . . . . . . . . . . . . . . . . . .R740 Cap Railing Floor
Splice Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R741 Bottom Rail Adaptor . . . . . . . . . . . . . . . . . . . . . . .R606-R607 Closer Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . .R591
Tangent Bend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R741 Cap and Vinyl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R557 Closer Spindles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R591
Adaptors for Cap Railing . . . . . . . . . . . . . . . . . . . . .R603-R607 Connector Sleeves . . . . . . . . . . . . . . . . . . . . . . . .R573, R577 Flange, ACRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R745
Adjustable Corners . . . . . . . . . . . . . . . . . . . . . .R560-R572, R576, R647 Mount Brackets for Foot Railing . . . . . . . . . . . . . .R797-R798
Brackets for Hand Railing . . . . . . . . . . . . . . . . . .R670-R671 End Caps . . . . . . . . . . . . . . . . . . . . .R558-R559, R577, R606 Socket with Cap for Hand Railing . . . . . . . . . . . . . . . . . .R665
Flanges for Hand Railing . . . . . . . . . . . . . . . . . . . . . . . .R665 Internal Splice Sleeves . . . . . . . . . . . . . . . . . . . . . . . . . .R574
Gate Pivot Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R591 Flush
Pocket Filler Channel . . . . . . . . . . . . . . . . . . . . . . . . . . .R605 Angles for Hand Railing . . . . . . . . . . . . . . . . . . . .R657-R659
Saddles for Hand Railing . . . . . . . . . . . . . . . . . . . . . . . .R666 Quote/Order Checklist . . . . . . . . . . . . . . . . . . . . .R580-R581
AGT Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R588 Crosses for Hand Railing . . . . . . . . . . . . . . . . . . . . . . . .R659
Return and Bottom Vinyl . . . . . . . . . . . . . . . . . . . . . . . . .R612 Tees for Hand Railing . . . . . . . . . . . . . . . . . . . . . .R658, R663
Alignment and Clamp Fixture . . . . . . . . . . . . . . . . . . . . . .R521 Swinging Gate . . . . . . . . . . . . . . . . . . . . . . . . . . . .R586-R587
All-Glass Railing System . . . . . . . . . . . . . . . . . . . .R513, R520 Wall Returns for Hand Railing . . . . . . . . . . . . . . . . . . . .R656
Aluminum Top Rail Adaptor . . . . . . . . . . . . . . . . . . . . . . . . . .R603-R605 Foam Backer Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R535
Base Shoe . . . .R528, R530, R532, R534, R544, R546-R548 Vinyl for Base Shoe . . . . . . . . . . . . . . . . . . . . . . . . . . . .R548 Foam Spacing and Sealing Pads . . . . . . . . . . . . . . . . . . .R525
Cap Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R556 Cap Rails . . . . . . . . . . . . . . . . . . . . . .R552-R557, R575, R578 Folding Post Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R803
Component Railing System . . . . . . . . . . . . . . . . .R738-R745 Carbide Tipped Saw Blade . . . . . . . . . . . . . . . . . . . . . . . .R808 Foot Railing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R797-R798
Drain Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R537 Cast Infill Panels for Aluminum Railing . . . . . . . . . . . . . .R712 Frameless Windscreen Systems . . . . . . . . . . . . . . . . . . . .R774
Gates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R779-R781 Cement and Mixing Accessories . . . . . . . . .R522-R523, R667, Free Swinging Pivot . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R591
Horseshoe Shims . . . . . . . . . . . . . . . . . . . . . . . . .R537, R814 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R721, R758, R775, R810 Full Flanges for Hand Railing . . . . . . . . . . . . . . . . . . . . . .R664
Quick Connect Hand Rail Bracket . . . . . . . . . . . . . . . . . .R736 Center-Hung Bottom Arms . . . . . . . . . . . . . . . . . . . . . . . .R591 G
Quick Connect Stabilizing Sleeves . . . . . . . . . . . . . . . . .R736 Certification of Testing . . . . . . . . . . . . . . . . . . . . . . . . . . .R541 Gate Hardware . . . . . . . . . . . . . . . . . .R588-R597, R782-R786
Shim Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R537 Chalk Line and Chalk . . . . . . . . . . . . . . . . . . . . . . . . . . . .R805 Gates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R779-R781
Wedge Removal Tool . . . . . . . . . . . . . . . . . . . . . . . . . . .R517 Cladding Glass
Aluminum Railing Base Shoe . . . . . . . . . . . . . . . . . . . .R529, R531, R533, R535 Centering Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R810
Base Plate Screws . . . . . . . . . . . . . . . . . . .R719, R731, R816 Fabrication Services . . . . . . . . . . . . . . . . . . . . . . . . . . . .R536 Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R631-R636
Base Plates . . . . . . . . . . . . . . . . . . . . . . . .R687, R718, R731 Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R536 Gates for Cap Railings . . . . . . . . . . . . . . . . . . . . .R586-R587
Bolt Cover Buttons . . . . . . . . . . . . . . . . . . . . . . . .R720, R816 Windscreen and Smoke Baffle Base Shoe . . . . . . . . . . .R548
Bottom Rail Filler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R708 Pocket Setting Block . . . . . . . . . . . . . . . . . . . . . . . . . . . .R763
Clamp and Alignment Fixture . . . . . . . . . . . . . . . . . . . . . .R521 Rail Standoff Fittings . . . . . . . . . . . . . . . . . . . . . .R640-R642
Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R685 Clear Plastic Horseshoe Shims . . . . . . . . . . . . . . . . . . . .R814
Cast Infill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R712 Railing Spider Fittings . . . . . . . . . . . . . . . . . . . . .R622-R629
Code Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R507 Setting Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R557
Connecting Blocks . . . . . . . . . . . . . . . . . . .R690, R709, R731 Color Swatch Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R725
Gate Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . .R779-R780 Stemware Racks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R798
Horizontal Mid-Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . .R707 Component Railing System, Aluminum . . . . . . . . .R738-R745 Z-Clamp Bolts and Rivet-Nuts . . . . . . . . . . . . . . . . . . . .R634
Horizontal Snap-In Infill . . . . . . . . . . . . . . . . . . . . . . . .R707 Concealed Surface Mount Hand Railing Brackets . .R668-R670 Glass Mounted Gate Latches . . . . . . . . . . . . . . . . .R592, R596
Lag Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R719 Concrete Anchors . . . . . . . . . . . . . . .R719, R815-R816, R818 Glass Mounted Hand Railing Brackets . . . . . . . . . .R669-R671
Laser Cut Infill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R713 Connecting Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R709 Glass Mounted Latch Keeper . . . . . . . . . . . . . . . . . . . . . .R592
Pickets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R711 Connector Sleeves . . . . . . . . . . . . . . . . . . . .R573, R577, R654 GlassWedge® and Wedge Isolators . . . . . . . . . . . . . . . . . .R515
Railing Posts . . .R682-R685, R716-R717, R722-R723, R730 Construction Master Calculator . . . . . . . . . . . . . . . . . . . .R805 GlassWedge® Dry Glaze
Stainless Steel Cable Infills . . . . . . . . . . . .R714-R715, R821 Contact Cement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R667 Base Shoe Alignment System . . . . . . . . . . . . . . .R514, R516
Stanchions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R686, R720 Conversion Kit for Hand Rail Brackets . . . . . . . . . . . . . . .R672 Installation Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R514
Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R676-R737 Coped Perpendicular Collars . . . . . . . . . . . . . . . . . . . . . .R667 Plumbing Plate Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R514
Water Jet Cut Infill . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R713 Cordless Impact Driver/Drill Kit . . . . . . . . . . . . . . . . . . . .R807 Removal Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R517
Aluminum Windscreen Core Mount Stanchions . . . . . . . . . . . . . . . . . . . . . . . . . .R758 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R510-R518
Gate Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R781 Corner Brackets for Aluminum Railing . . . . . . . . . . . . . . .R706
Posts . . . . . . . . . . . . . . . . . . . . . . . .R751-R757, R766, R772 Temporary Isolator Setting Tool . . . . . . . . . . . . . . . . . . .R516
Corner Post Adaptors, ACRS . . . . . . . . . . . . . . . . . . . . . .R743 Wedge Setting Chisel and Hammer . . . . . . . . . . . . . . . .R516
Stanchions . . . . . . . . . . . . . . . . . . . . . . . . .R758-R759, R773 Corners for Cap Railings . . . . .R560-R572, R576, R655, R657
Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R748-R773 Glazing Vinyl . . . . . . . . . . . . . . . . . . . . . . . .R689, R761, R773
Cover Flange, ACRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R745
Americans with Disabilities Act (A.D.A.) . . . . . . . . . . . . . .R507 Cross Adaptors, ACRS . . . . . . . . . . . . . . . . . . . . . . . . . . .R743 GRS Quote/Order Request Form/Checklist . . . . . . . . . . . .R540
Angle Collars for Hand Railing . . . . . . . . . . . . . . . . . . . . .R662 H
CRS Post Railing System . . . . . . . . . . . . . . . . . . . .R598-R613 Hand Railing
Angle Flanges for Hand Railing . . . . . . . . . . . . . . . . . . . .R665 Custom Angle Corner for Cap Rail . . .R564-R565, R570-R572
Angled Tee Adaptors, ACRS . . . . . . . . . . . . . . . . . . . . . . .R742 Angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R657-R659
Custom Corner Order Forms . . . . . . . . . . . . . . . . .R565, R572 Bracket Mounting Hardware . . . . . . . . . . . . . . . . . . . . . .R818
Anglefix Measuring Tool . . . . . . . . . . . . . . . . . . . . . . . . . .R806 Custom Gate Systems for Aluminum Railings . . . .R780-R781
Angletronic Measuring Tool . . . . . . . . . . . . . . . . . . . . . . .R806 Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . .R668-R672, R736
A-T Series Insert Fasteners and Tools . . . . . . . . . .R819-R820 Cut Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R664 Connector Sleeves . . . . . . . . . . . . . . . . . . . . . . . .R654, R736
Atlas Hinge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R594 Cylinder Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R593 Corners . . . . . . . . . . . . . . . . . . . . . . . . . . .R655, R657, R659
B D
Decorative Cap Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R732 Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R656, R658
Backer Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R535 End Caps . . . . . . . . . . . . . . . .R647, R654-R656, R673, R740
Ball Type Decorative Glass Film . . . . . . . . . . . . . . . . . . . . . . .R801-R802
Digitape Tape Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R805 Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R654-R667
Angle Collars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R662 Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R664-R665
Crosses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R662-R663 Dispensing Bottle . . . . . . . . . . . . . . . . . . . . . . . . . .R522, R809
Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R660-R662 Displays for Showrooms . . . . . . . . . . . . . . . . . . . . . . . . . .R725 Quick Connect System . . . . . . . . . . . . . . . . . . . . .R734-R737
End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R656 Distance Measuring Laser . . . . . . . . . . . . . . . . . . . . . . . .R805 Quote/Order Checklist . . . . . . . . . . . . . . . . . . . . . . . . . .R675
Inline Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R660 Dome End Caps for Hand Railing . . . . . . . . . . . . . . . . . . .R655 Saddles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R666
Side Outlet Elbow . . . . . . . . . . . . . . . . . . . . . . . . .R661-R663 Drain Blocks for Base Shoe . . . . . . . . . . . . . . . . . . . . . . .R537 Tubing . . . . . . . . . . . . . . . . . . . . . . .R652-R653, R735, R739
Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R661, R663 Drilling Jig, ACRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R745 Hand Rails Online . . . . . . . . . . . . . . . . . . . . . . . . . .R504-R505
Bar Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R808 Driver/Drill, Cordless . . . . . . . . . . . . . . . . . . . . . . . . . . . .R807 Horizontal
Barrier Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . .R767-R769 E Corners for Cap Railing . . . . . . . . . . . . . . .R560-R565, R576
Base Plate Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R687 Econ-O-Post Hole Form . . . . . . . . . . . . . . . . . . . . . . . . . .R804 Mid-Rail for Aluminum Railings . . . . . . . . . . . . . . . . . . .R707
Base Plate Screws . . . . . . . . . . . . . . . . . . . .R719, R731, R816 Elbows for Hand Railing . . . . .R656, R658, R660-R662, R740 Snap-In Infill for Aluminum Railings . . . . . . . . . . . . . . .R707
Base Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R687, R718 Elevated Glass Railing System . . . . . . . . . . . . . . . .R542-R545 Splice Sleeves for Cap Railing . . . . . . . . . . . . . . . . . . . .R574
Base Shoe . . . . .R528, R530, R532, R534, R544, R546-R548 End Caps Horseshoe Shims . . . . . . . . . . . . . . . . . . . . .R537, R813-R814
Base Shoe Aluminum Railing . . . . . . . . . . . . . . . . . . . . . . . . .R700-R701 Hospitality Hardware . . . . . . . . . . . . . . . . . . . . . . . .R795-R798
Alignment Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R516 Base Shoe . . . . . . . . . . . . . . . . . . . .R529, R531, R533, R535 I
Attachments . . . . . . . . . . . . . . . . . . .R526-R527, R536, R539 Cap Railing . . . . . . . . . . . . . . . . . . .R558-R559, R577, R606 Impact Sockets and Accessories . . . . . . . . . . . . . . . . . . . .R539
Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R524 Hand Railing . . . . . . . . . . . . .R647, R654-R656, R673, R740 Incline Corners for Cap Railing . . . . . . . . . . . . . . .R568-R569
Cladding and Caps . . . . . . . .R529, R531, R533, R535, R548 Indicator Brackets . . . . . . . . . . . . . . . . . . . . . . . . . .R514, R521
Fasteners and Accessories . . . . . . . . . . . . . . . . . . . . . . .R539 Quick Connect Hand Railing . . . . . . . . . . . . . . . . . . . . .R736
Wood Cap Railing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R579 Inline Outlet for Hand Railing . . . . . . . . . . . . . . . . . . . . . .R660
Quote/Order Checklist . . . . . . . . . . . . . . . . . . . . . . . . . .R540 Insert Bits . . . . . . . . . . . . . . . . . . . . . . . . . . .R690, R709, R816
Shims and Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R537 End Loop, Hand Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R739
Bituminous Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R810 Extension Arm for Hand Rail Brackets . . . . . . . . . . . . . . .R672 Inside Angle Incline Corners . . . . . . . . . . . . . . . . . . . . . . .R569
Bottom Rail Extruded Aluminum Cap Rails . . . . . . . . . . . . . . . . . . . . .R556 Installation Instructions . . . . . . . . . . . . . . . .R582, R639, R651,
Adaptor for Cap Railing . . . . . . . . . . . . . . . . . . . .R606-R607 Extrusions and Moldings . . . . . . . . . . . . . . . . . . . .R787-R793 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R726, R749, R765, R776
Filler for Aluminum Windscreens . . . . . . . . . . . . . . . . . .R762 EZ Radius Corners for Hand Railing . . . . . . . . . . . . . . . . .R659 Installation Tool Kit, P-Post Top Rail . . . . . . . . . . . . . . . .R807
for Aluminum Railing . . . . . . . . . . . . . . . . . . . . . . . . . . .R708 F Installation Tools for Aluminum Railing . . . . . . . . . . . . . .R822
for Aluminum Windscreens . . . . . . . . . . . . . . . . . . . . . .R761 400 Series Post Kits . . . . . . . . . . . . . .R716-R717, R722-R723 Intermediate Bottom Glass Rail for Windscreens . . . . . . .R762
Vinyl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R612 400 Series Railing System . . . . . . . . . . . . . . . . . . . . . . . .R697 Intermediate Bottom Support for Aluminum Rail . .R690, R709
Bottom Rigid Glazing Vinyl . . . . . . . . . . . . . . . . . . . . . . .R762 Fascia Mount Brackets . . . . . . . . . . . . . . . . . . . . . .R610, R685 Intermediate Post Fitting for Aluminum Railing . . . . . . . .R690
Bracket Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . .R672 Fascia Mount Posts . . . . . . . . . . . . . .R684-R685, R722-R723 Isolators, GlassWedge® . . . . . . . . . . . . . . . . . . . . . . . . . . .R515

PHONE (800) 421-6144 | FAX (800) 262-3299 TOLL FREE FROM ANYWHERE IN THE U.S.A. OR CANADA
HR09 CATALOG A TO Z PRODUCT INDEX
K Premium Cap Rails . . . . . . . . .R553-R555, R575, R600-R601 Swager Installation Tool Kit . . . . . . . . . . . . . . . . . . . . . . .R822
Keyed Cylinder Lock with Thumbturn . . . . . . . . . . . . . . . .R593 Protractor/Angle Finder . . . . . . . . . . . . . . . . . . . . . . . . . . .R806 Swaging Stud Fitting . . . . . . . . . . . . . . . . . .R649, R715, R821
Kwixset® Cement . . . . . . . . . .R523, R721, R758, R775, R810 PullBolt™ Security Locks . . . . . . . . . . . . . . . . . . . . . . . . .R786 Swinging Gates for Cap Railing . . . . . . . . . . . . . . .R586-R587
L Push Lock Fitting . . . . . . . . . . . . . . . . . . . . .R649, R715, R821 T
Lag Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R719, R816 Q 200 Series Post Kits . . . . . . . . . . . . . .R716-R717, R722-R723
Laser Cut Infill Panels for Aluminum Railing . . . . . . . . . .R713 Quick Connect 200 Series Railing System . . . . . . . . . . . . . . . . . . . . . . . .R694
Laser Tools and Brackets . . . . . . . . . . . . . . .R514, R521, R811 Aluminum Hand Railing . . . . . . . . . . . . . . . . . . . .R734-R737 300 Series Post Kits . . . . . . . . . . . . . .R716-R717, R722-R723
Latches, Gate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R783 Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R736 300 Series Railing System . . . . . . . . . . . . . . . . . . . . . . . .R695
LED Lighting Components . . . . . . . . . . . . . .R584-R585, R733 Corners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R735 350 Series Post Kits . . . . . . . . . . . . . .R716-R717, R722-R723
LED Post Lighting . . . . . . . . . . . . . . . . . . . . . . . . . .R732-R733 End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R736 350 Series Railing System . . . . . . . . . . . . . . . . . . . . . . . .R696
Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R803, R806 Rail Returns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R737 Tangent Bend, ACRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R741
Lever Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R593 Stabilizing Aluminum Sleeves . . . . . . . . . . . . . . . . . . . .R736 Tape Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R805
Lights for Aluminum Railings . . . . . . . . . . . . . . . . .R732-R733 Quick-Grip Bar Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . .R808 Tapered Base Shoe . . . . . . . . . . . . . . . . . . . . . . . . .R534-R535
Locks for Gate Systems . . . . . . . . . . . . . . . . . . . . .R783-R786 Quote/Order Request Form/Checklist . . . . . . . . . . . . . . . . . . . . Technical Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R825
Long Length Corners for Cap Railing . . . . . . . . . .R564, R571 . . . .R540, R565, R572, R580-R581, R650, R675, R727, R764 Temporary Wedge Isolator Setting Tool . . . . . . . . . . . . . .R516
Looped Quick Connect Hand Rail Return . . . . . . . . . . . . .R737 R Tensioning Receiver . . . . . . . . . . . . . . . . . . .R649, R715, R821
Low Profile Square Base Shoe . . . . . . . . . . . . . . . .R532-R533 Rail Connecting Blocks . . . . . . . . . . . . . . . .R690, R709, R762 Thread Protecting Nylon Allen Screws . . . . . . . . . . . . . . .R538
Lower Adjustable Tee Adaptors, ACRS . . . . . . . . . . . . . . .R744 Railing Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R506 Three-Way Adjustable Hand Railing Brackets . . . . . . . . .R670
M Railing System Titebond® Wood Glue . . . . . . . . . . . . . . . . . . . . . . .R579, R674
Magnetic Gate Locks . . . . . . . . . . . . . . . . . . . . . . . .R784-R785 Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R676-R737 Top Rail
Masonry Drills . . . . . . . . . . . . . . . . . . . . . . . . . . . .R539, R807 Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R598-R613 Aluminum Railing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R698
Match-Up Paint . . . . . . . . . . . . . . . . . . . . . . . . . . .R724, R763 Elevated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R542-R545 Adaptor for Cap Railing . . . . . . . . . . . . . . . . . . . .R603-R605
Manufacturing Information . . . . . . . . . . . . . . . . . . . . . . . .R824 Standoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R640-R642 End Caps for Cap Railing . . . . . . . . . . . . . . . . . . . . . . .R606
Measuring Stairways . . . . . . . . . . . . . . . . . .R583, R613, R637 Welded Post . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R644-R651 Fastening Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R706
Measuring Tools . . . . . . . . . . . . . . . . . . . . . . . . . . .R514, R521 Railings Online Design Program . . . . . . . . . . . . . .R504-R505 Infills for Aluminum Railing . . . . . . . . . . . . . . . . . . . . . .R699
Metal Contact Cement . . . . . . . . . . . . . . . . . . . . . . . . . . .R667 Rigid Glazing Vinyl for Aluminum Windscreens . . . . . . .R761 Installation Kit, P-Post . . . . . . . . . . . . . . . . . . . . . . . . . .R807
Mini Z-Series Glass Clamps . . . . . . . . . . . . . . . . . . . . . . .R631 Rigid Rubber Spacing Blocks with Adhesive . . . . .R518, R525 Top Rubber Gasket for Base Shoe . . . . . . . . . . . . .R518, R524
Miter Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R808 Rivet-Nut Drill Bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R635 Torpedo Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R806
Mitered Corner Cladding . . . . . . . . . .R529, R531, R533, R535 Rivet-Nut for Glass Clamps . . . . . . . . . . . . . . . . . .R634, R815 Touch-Up Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . .R724, R763
Mitered Corners for Hand Railing . . . . . . . . . . . . . . . . . . .R657 Rockite® Cement . . . . . . . . . . . . . . . . . . . . .R523, R721, R810 Tru-Close® Gate Hinges . . . . . . . . . . . . . . . . . . . . . . . . . .R782
Mixing Tools for Cement . . . . . . . . . . . . . . . . . . . . . . . . .R523 Roller Tool for Backer Rod . . . . . . . . . . . . . . . . . . . . . . . .R535 Tubing
Moisture Barrier Gaskets . . . . . . . . . . . . . . . . . . . .R718, R759 Roll-in Vinyl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R548 Ends for Foot Railing . . . . . . . . . . . . . . . . . . . . . . . . . . .R798
N Rotary Hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . .R539, R807 Hand Railing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R652-R653
90 Degree Rubber Spacing Blocks . . . . . . . . . . . . . . . . . . . . .R518, R525 Hinge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R597
Aluminum Railing Corners . . . . . . . . . . . . . . . . . .R702-R703 S Latch and Strike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R597
Elbows, ACRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R740 Safety Guard Rail Base System . . . . . . . . . . . . . . . . . . . . .R804 Tuff-Pak Glass Setting Tape . . . . . . . . . . . . . . . . . . . . . . .R557
Horizontal Splice Sleeves . . . . . . . . . . . . . . . . . . . . . . . .R574 Saw Blade, Carbide Tipped . . . . . . . . . . . . . . . . . . . . . . . .R808 Two-Way Adjustable Hand Railing Brackets . . . . . .R669-R671
Quick Connect Corners . . . . . . . . . . . . . . . . . . . . . . . . .R735 Schedule 40 Pipe Rail Tubing . . . . . . . . . . . . . . . . . . . . . .R646 U
Vertical Splice Sleeves . . . . . . . . . . . . . . . . . . . . . . . . . .R574 Screws . . . . . . . . . . . . . . . . . . . . . . . .R538-R539, R816-R818 U-Channel Cap for Cap Railing . . . . . . . . . . . . . . .R557, R775
Neutral Cure Silicone . . . . . . . . . . . . . . . . . .R536, R721, R763 Security Check Point Barriers . . . . . . . . . . . . . . . . .R768-R769 Universal Pressure Drill . . . . . . . . . . . . . . . . . . . . . . . . . .R807
Nylon Allen Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R538 Service Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R796 Upper Adjustable Tee Adaptors, ACRS . . . . . . . . . . . . . . .R744
O Setting and Centering Blocks for Base Shoe . . . . . . . . . .R524 V
100 Series Setting Block for Aluminum Windscreen Posts . . . . . . . .R763 Vertical Corners for Cap Railing . . . . . . . . . . . . . . .R566-R572
Base Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R687, R718 Sharp Radius Corners for Hand Railing . . . . . . . . . . . . . .R655 Vinyl
Bottom Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R689 Shim Strips, Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . .R537 Aluminum Railing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R689
Connecting Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R690 Shims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R537, R813-R814 Cap Railing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R612
Glazing Vinyl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R689 Showroom Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R725 Component Railing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R612
Pickets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R688 Silicone, Neutral Cure . . . . . . . . . . . . . . . . .R536, R721, R763 Roller for Top Rubber Gasket . . . . . . . . . . . . . . . . . . . . .R518
Post Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R686 Small Profile Windscreen Base Shoe . . . . . . . . . . . . . . . .R546 W
Post Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R682-R685 Smoke Baffle Base Shoe . . . . . . . . . . . . . . . . . . . . .R547-R548 Wall/Fin Mounted Fitting for Spider Fittings . . . . .R627-R628
Railing System . . . . . . . . . . . . . . . . . . . . . . . . . . .R680-R681 Sneeze Guards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R795 Wall Mount Gate Pivot . . . . . . . . . . . . . . . . . . . . . .R586-R587
Top Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R689 Socket Head Cap Screws . . . . . . . . . . . . . . . . . . . . . . . . .R539 Wall Protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . .R799-R800
135 Degree Horizontal Corners . . . . . . . . . . . . . . .R704-R705 Spacing Blocks for Base Shoe . . . . . . . . . . . . . . . .R518, R525 Wall Returns, Hand Rail . . . . . . . . . . . . . . . . . . . . .R737, R739
135 Degree Horizontal Splice Sleeves . . . . . . . . . . . . . . .R574 Spanner Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R642 Water Jet Cut Infill Panels for Aluminum Railing . . . . . . .R713
135 Degree Quick Connect Corners . . . . . . . . . . . . . . . . .R735 Spider Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R622-R629 Wedge Bolt Anchors and Washers . . .R539, R719, R815-R816
Online Catalog . . . . . . . . . . . . . . . . . . . . . . . . . . . .R502-R503 Splice Wedge Isolators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R515
Online Railings Design Program . . . . . . . . . . . . . .R504-R505 Coupling, ACRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R741 Wedge Setting Chisel and Hammer . . . . . . . . . . . . . . . . .R516
Ornamental Metalwork . . . . . . . . . . . . . . . . . . . . . . . . . . .R794 Plates for Aluminum Railing . . . . . . . . . . . . . . . . . . . . . .R706 Wedgit Glass Centering Springs . . . . . . . . . . . . . . . . . . . .R810
Outside Angle Incline Corners for Cap Railing . . . . . . . . .R568 Plates for Elevated Glass Railing . . . . . . . . . . . . . . . . .R545 Weld Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R538
P Sleeves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R574 Welded End Cladding . . . . . . . . . . . . . . . . .R529, R531, R533
Paint, Touch-Up . . . . . . . . . . . . . . . . . . . . . . . . . . .R724, R763 Square Cap Rails . . . . . . . . . . . . . . . . . . . . . . . . . .R575-R577 Welded Post Railing System . . . . . . . . . . . . . . . . . .R644-R651
Partition Post and Booth Divider Systems . . . . . . . . . . . .R795 Stabilizing End Caps for Cap Railing . . . . . . . . . . .R559, R577 Wet Glaze Alignment System . . . . . . . . . . . . . . . . . . . . . .R521
Patch Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R589 Stabilizing Sleeves for Quick Connect Aluminum Rail . . .R736 Wet Glaze Pump and Accessories . . . . . . . . . . . . . . . . . .R522
Patio Windscreen Posts . . . . . . . . . . . . . . . . . . . . .R770-R773 Stainless Steel Wet Glaze System . . . . . . . . . . . . . . . . . . . . . . . . . .R519-R525
Perpendicular Collars . . . . . . . . . . . . . . . . . . . . . . .R666-R667 Cable and Accessories .R648-R649, R714-R715, R821-R822 Windscreen
Pickets for Aluminum Railing . . . . . . . . . . . . . . . . .R688, R711 Post Railing System . . . . . . . . . . . . . . . . . . . . . . .R644-R651 Base Shoe and Accessories . . . . . . . . . . . . . . . . .R546, R548
Plastic Horseshoe Shims . . . . . . . . . . . . . . . . . . . .R813-R814 Security Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R786 Gate Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R781
Pliers for Cable Installation . . . . . . . . . . . . . . . . . . . . . . . .R822 Stairway Glass Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . .R636 Post Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . .R748-R773
Plumbing Plate Kits . . . . . . . . . . . . . . . . . . . . . . . .R514, R521 Stairway Measuring . . . . . . . . . . . . . . . . . . .R583, R613, R637 Systems, Frameless . . . . . . . . . . . . . . . . . . . . . . .R774-R776
Pocket Filler Channel for Cap Railing . . . . . . . . . . . . . . . .R605 Stanchions Wood Railing
Portable Band Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R808 Aluminum Railing . . . . . . . . . . . . . . . . . . . . . . . .R686, R720 Biscuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R578, R674
Post Aluminum Windscreen . . . . . . . . . . . . . . . .R758-R759, R773 Cap Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R578
Adaptors for Spider Fittings . . . . . . . . . . . . . . . . . . . . . .R624 Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R545 End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R579
Caps for Aluminum Railing . . . . . . . . . . . . . . . . .R686, R731 Elevated Glass Railing . . . . . . . . . . . . . . . . . . . . . . . . . .R544 Glue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R579, R674
Caps for Aluminum Windscreens . . . . . . . . . . . . . . . . . .R760 Post Railing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R608 Hand Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R674
Fillers for Aluminum Windscreens . . . . . . . . . . . . . . . . .R761 Standard Cast Infills . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R712 Wood Shims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R814
Gate Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R782 Standard Square Base Shoe . . . . . . . . . . . . . . . . . .R528-R529 Z
Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R803 Standoff and Glass Connection Systems . . . . . . . . . . . . .R643 Z-Clamp Bolt and Rivet-Nut . . . . . . . . . . . . . . . . . . . . . . .R634
Leveling Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R803 Standoff Railing Systems . . . . . . . . . . . . . . . . . . . .R640-R642 Z-Lokk™ Magnetic Gate Lock . . . . . . . . . . . . . . . . . . . . . .R785
Mounted Decorative Light . . . . . . . . . . . . . . . . . . . . . . .R732 Steel Drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R808 Z-Series Glass Clamps . . . . . . . . . . . . . . . . . . . . . .R631-R635
Mounted Fittings for Spider Fittings . . . . . . . . . . .R624-R626 Steel Flanges and Canopies for Hand Railing . . . . . . . . .R664
Railing Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . .R631-R636 Steel Tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R808
Railing Systems . . . . . . . . . . . . . . . . . . . . . . . . . .R614-R639 Straight-Line Chalk Line . . . . . . . . . . . . . . . . . . . . . . . . .R805
Posts, Aluminum Railing R682-R685, R716-R717, R722-R723 Straight Saddles for Hand Railing . . . . . . . . . . . . . . . . . . .R666
Posts, Aluminum Windscreen . . . . . .R751-R757, R766, R772 Straight Tee Adaptors, ACRS . . . . . . . . . . . . . . . . . . . . . .R742
Pouring Ramp for Expansion Cement . . . . . . . . . . . . . . . .R522 Structural Strength and Testing Data . . . . . . . . . . . . . . . .R507
P-Post Top Rail Installation Kit . . . . . . . . . . . . . . . . . . . . .R807 Surface Mount Stanchions . . . . . . . . . . . . . . . . . . . . . . . .R759
P-Series Post Railing Systems . . . . . . . . . . . . . . . .R614-R639 Surface Mounted Hand Railing Brackets . . . . . . . .R668-R671

PHONE (800) 421-6144 | FAX (800) 262-3299 TOLL FREE FROM ANYWHERE IN THE U.S.A. OR CANADA
A
HR09 CATALOG
05 52 00 METAL RAILINGS
C.R. LAURENCE COMPANY 05 70 00 ARCHITECTURAL AND ORNAMENTAL RAILINGS
05 73 00 HAND RAILS & RAILINGS
UNITED STATES Visit Our Web Site: crlaurence.com

Corporate Headquarters
LOS ANGELES, CALIFORNIA Phone: (323) 588-1281 Fax: (323) 581-6522
Phone: (404) 696-3445 Phone: (303) 373-9988 Phone: (407) 857-7900

ATLANTA, GEORGIA DENVER, COLORADO ORLANDO, FLORIDA
Fax: (404) 696-3386 Fax: (303) 373-0884 Fax: (407) 857-7766

BOSTON AREA, MASSACHUSETTS HOUSTON, TEXAS PHILADELPHIA AREA
Fax: (508) 880-5775 Fax: (713) 462-6306 Fax: (856) 727-3299
Phone: (847) 426- 3800 Phone: (702) 253-0211 Phone: (602) 269-7500
CHICAGO AREA, ILLINOIS LAS VEGAS, NEVADA PHOENIX, ARIZONA
Fax: (847) 426-0111 Fax: (702) 253-0311 Fax: (602) 269-7600

CLEVELAND AREA, OHIO MIAMI AREA, FLORIDA SAN FRANCISCO / OAKLAND AREA
Fax: (440) 248-0120 Fax: (954) 846-9277 Fax: (510) 475-1404

DALLAS, TEXAS NEW YORK CITY AREA SEATTLE AREA, WASHINGTON
Fax: (214) 631-6519 Fax: (201) 770-1599 Fax: (253) 813-1818
Corporate Headquarters
TORONTO AREA, ONTARIO CALGARY, ALBERTA
Phone: (905) 303-7966 Phone: (403) 250-5783
Fax: (905) 303-7965 Fax: (403) 291-3260
CRL CANADA MONTREAL AREA, QUEBEC VANCOUVER AREA, B.C.

Phone: (514) 352-3300 Phone: (604) 448-9344
crlaurence.ca Fax: (514) 352-1017 Fax: (604) 448-9322
SYDNEY AREA, NEW SOUTH WALES BAD WIMPFEN, GERMANY

Phone: (02) 9851-3444 Phone: (49) 0 7063 933 633
Fax: (02) 9851-3445 Fax: (49) 0 7063 933 634
CRL AUSTRALIA CRL EUROPE

crlaurence.com.au crlaurence.com
C.R. Laurence Corporate Headquarters in Los Angeles, California.
C.R. LAURENCE CO., INC. C.R. LAURENCE MANUFACTURING

Corporate Headquarters Los Angeles, CA 90058-0923
Post Office Box 58923, Los Angeles, CA 90058-0923 Phone: (323) 588-1281 • Fax: (323) 581-6522
International Phone: (323) 588-1281 • International Fax: (323) 581-6522
© Copyright 2008, C.R. Laurence Co., Inc.

CRL Catalogo - hr09 - 021609

Uploaded by

Copyright:

Available Formats

CRL Catalogo - hr09 - 021609

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CRL Catalogo - hr09 - 021609

Uploaded by

Copyright:

Available Formats

What products does CRL offer?

What products does CRL offer?

What services does CRL provide?

What services does CRL provide?

ARCHITECTURAL HR09 CATALOG

• Glass Railings • Aluminum Railing

C.R. LAURENCE COMPANY

GLASS RAIL BASE SHOES CAP RAILING SYSTEMS

GATE SYSTEMS COMPONENT RAILING SYSTEMS

POST RAILING SYSTEMS SRS STANDOFF RAILING SYSTEM

HAND RAILING SYSTEMS ALUMINUM RAILING SYSTEMS

ALUMINUM WINDSCREENS RAILING TOOLS, FASTENERS,

LOG ON TO crlaurence.com FOR BUSINESS-TO-BUSINESS SERVICES

Welcome to the C.R. Laurence

LOG ON TO crlaurence.com FOR BUSINESS-TO-BUSINESS SERVICES

User's Guide Menu to CRL Online (Cat. No. UG08)

LOG ON TO crlaurence.com FOR BUSINESS-TO-BUSINESS SERVICES

CRL Hand Rails Online

LOG ON TO crlaurence.com FOR BUSINESS-TO-BUSINESS SERVICES

CRL Hand Rails Online

LOG ON TO crlaurence.com FOR BUSINESS-TO-BUSINESS SERVICES

Glossary of Common Railing Terms

LOG ON TO crlaurence.com FOR BUSINESS-TO-BUSINESS SERVICES

We Say "Yes" to Custom Fabrication

Common Railing Terminology

Americans with Disabilities Act (A.D.A.)

Structural Strength and Testing Data

LOG ON TO crlaurence.com FOR BUSINESS-TO-BUSINESS SERVICES

(EGR) Elevated Glass Rail System

(EGR) Elevated Glass Rail System

LOG ON TO crlaurence.com FOR BUSINESS-TO-BUSINESS SERVICES

CRL Balustrades, Hand Rails, and Guard Rails

Hand Rail Balustrade Guard Rail Balustrade Hand Rail/Guard Rail

The Hand Grip

Drawings and Specifications - How to Get Them

LOG ON TO crlaurence.com FOR BUSINESS-TO-BUSINESS SERVICES

A Tale of Two Systems…

TAPER-LOC™ Dry Glaze System Wet Glaze System

• A New Method for Quick • A Tried and True Method to

LOG ON TO crlaurence.com FOR BUSINESS-TO-BUSINESS SERVICES

The CRL TAPER-LOC™ Dry Glaze System

Now You Have an Alternative

LOG ON TO crlaurence.com FOR BUSINESS-TO-BUSINESS SERVICES

The CRL TAPER-LOC™ Dry Glaze System

Ready Set Done

Install TAPER-LOC™ Roll in the Glazing

LOG ON TO crlaurence.com FOR BUSINESS-TO-BUSINESS SERVICES

The CRL 'All-Glass' Railing System

LOG ON TO crlaurence.com FOR BUSINESS-TO-BUSINESS SERVICES

CRL TAPER-LOC™ Dry Glaze Base Shoe Alignment System

Step 5: Step 6: Step 7:

CRL PAL Plumb/Angle/Level CRL PAL Plumb/Angle/Level

LOG ON TO crlaurence.com FOR BUSINESS-TO-BUSINESS SERVICES

CRL TAPER-LOC™ for 1/2" (12 mm)

Install TAPER-LOC™ Roll in the Glazing

TAPER-LOC™ Spacing Guidelines

TYPICAL BASE SHOE ELEVATION

B: The Taper-Loc™ maximum center-to-center

LOG ON TO crlaurence.com FOR BUSINESS-TO-BUSINESS SERVICES