Scribd
Upload
666 views1 page

Samson Sizing

This document provides information for sizing a globe valve to control vent gas flow in three cases. It includes process data like flow rates and temperatures, results of the valve sizing calculation like the minimum required valve size and outlet velocity, valve specifications, and actuator requirements. The valve must handle gas flow rates of 1581.9 kg/h and 1301.7 kg/h at inlet pressures of 0.099 kg/cm2(g) and outlet pressures of 0.004 kg/cm2(g) in cases 1 and 2, respectively.

Uploaded by

เต่า วีไอ
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
666 views1 page

Samson Sizing

This document provides information for sizing a globe valve to control vent gas flow in three cases. It includes process data like flow rates and temperatures, results of the valve sizing calculation like the minimum required valve size and outlet velocity, valve specifications, and actuator requirements. The valve must handle gas flow rates of 1581.9 kg/h and 1301.7 kg/h at inlet pressures of 0.099 kg/cm2(g) and outlet pressures of 0.004 kg/cm2(g) in cases 1 and 2, respectively.

Uploaded by

เต่า วีไอ
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Propsl./order no.

: Customer PTTCHEM
Project: BPE Date: 4/17/2009 Data entered by: PM

Item no. 2 Tag no. PV-406B


Process medium Vent Gas State of medium at inlet: gas Valve Sizing Version 4.72

Process and medium data Case 1 Case 2 Case 3


Flow W [kg/h] 1581.9 1301.7
Inlet pressure p1 [kg/cm²(g)] 0.099 0.099 Case 1 Case 2
Outlet pressure p2 [kg/cm²(g)] 0.004 0.004 N2 Gas N2 Gas
Inlet temperature t1 [°C] 139.74 118.67 F = 1,000 Nm3/H F = 1,000 Nm3/H
p1= 465 mmH20 p1= 326 mmH20
Molar mass M [g/mol] 29.18 29.18 p2= -150 mmH20 p2= -150 mmH20
Isentropic exponent gamma 1.40 1.40 T=139.74 T=118.67
Real gas factor Z 1.00 1.00
Viscosity eta [cP] 0.0237204 0.0237204

Results and factors


Valve coeff. calculated Cv 203 163
Min. req. size Req. DN ["] 2.87" 2.57"
Outlet velocity w [Mach] 0.0710 0.0569
SPL VDMA 24422 mod. LA [dB(A)] 52 51
relative travel T [%] 71.8 61.4
Different. pressure ratio x 0.08 0.08
FL value FL 0.91 0.91
xT value xT 0.69 0.70
Valve style factor Fd 0.44 0.44
Level exponent G1 -3.16 -3.18
Slope exponent G2 2.38 2.38

Valve data
Body type Globe valve Series 240
Valve coefficient Cv 300 Type 3241-7
Nominal size DN ["] 6" Body material A351 CF8M
Pressure ratings CLASS 300 Noise reduction without
Travel S [mm] 30 Charact. Equal perc.
Seat bore SB [mm] 130 Flow direction FTO
Stem diameter Sd [mm] 16 Balanced without (0.0)
Internal parts material 4571 / 316Ti stell. Leakage rate IV
Packing PTFE (1.6) Bonnet bellows
Sealing metal (2.0)

Pipe data Type of pipe Steel pipe Pipe insulation none D1 ["] 6" D2 ["] 6"
cR [m/s] 5100 rho [kg/m³] 7800 di [mm] 154.1 s [mm] 7.1

Actuator data
Type 3277 Fail-safe act. extends
Diaphr. area A [cm²] 700 Bench range ps0 [bar] 0.2 ... 1
Supply psu [bar] 1.20
(Defaults: p1max [bar(a)] 1.1 p2min [bar(a)] 1.01 t1max [°C] 139.74)

Actuator results
req. act. force Fo req. [kN] 1.26 req. diff. psu-ps100 d ps [bar] 0.05
max. act. force Fmax [kN] 54.52 Actuator force Fa [kN] 1.40
max. dp on plug d. pmax [bar] 0.20 Close safety factor Fa/Fo (SF) 1.11
req. start bench range ps0req. [bar] 0.20

You might also like