Scribd
Upload
106 views1 page

Digital Ic Lab Viva Voice Questions

The document contains 15 questions related to digital integrated circuits and lab viva questions. The questions cover topics such as reducing metastable state failure, advantages and disadvantages of synchronous reset, why NAND gates are preferred over NOR gates, read and write times for SRAM, implementing logic gates using multiplexers, interfacing crystals to microprocessors, implementing inverters with single transistors, handling delays in combinational circuits between registers, significance of negative slack, insertion delay, designing circuits to handle different crystal and processor frequencies, hazards in digital circuits such as static 1 and static 0 hazards, using hardware to indicate direction of rotation, and implementing master-slave flip flops using multiplexers.

Uploaded by

skarthikmtech
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
106 views1 page

Digital Ic Lab Viva Voice Questions

The document contains 15 questions related to digital integrated circuits and lab viva questions. The questions cover topics such as reducing metastable state failure, advantages and disadvantages of synchronous reset, why NAND gates are preferred over NOR gates, read and write times for SRAM, implementing logic gates using multiplexers, interfacing crystals to microprocessors, implementing inverters with single transistors, handling delays in combinational circuits between registers, significance of negative slack, insertion delay, designing circuits to handle different crystal and processor frequencies, hazards in digital circuits such as static 1 and static 0 hazards, using hardware to indicate direction of rotation, and implementing master-slave flip flops using multiplexers.

Uploaded by

skarthikmtech
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

DIGITAL IC LAB VIVA VOICE QUESTIONS

PART SEVEN
Staff in-charge: 1. KARTHIK.S 2. ASHA P S

1. How chance of metastable state failure can be reduced?


2. What are the advantages of using synchronous reset?
3. What are the disadvantages of using synchronous reset?
4. Why is NAND gate preferred over NOR gate for digital circuits?
5. Which ones take more time in SRAM: Read operation or Write operation? Why?
6. Implement a two input XNOR gate using mux.
7. A XTAL is generating a clock at a frequency of 6MHZ, but we need to connect it to 8085
microprocessor, design a simple circuit to interface this XTAL & 8085. Calculate the set
up time from the new frequency given hold time is 2nS & Propagation delay is 10nS.
8. Implement an inverter using single transistor.
9. Suppose you have a combinational circuit between two registers driven by a clock. What
will you do if the delay of the combinational circuit is greater than your clock signal?
10. What is the significance of negative slack?
11. What is insertion delay?
12. Design circuit to solve the problem of connecting 3MHZ 8085 processor with a 1.5 MHZ
XTAL.
13. What is HAZARD? What is static 1 and static 0 Hazards?
14. The circle can rotate clockwise and back. Use minimum hardware to build a circuit to
indicate the direction of rotating?
15. How to implement a Master Slave flip flop using a 2 to 1 mux?

***********************______________________________***********************

You might also like