Scribd Logo
Upload

Welcome to Scribd!

  • 26 views

    DI96

    Uploaded by

    Erln Lima
    This document provides instructions for troubleshooting a cruise control system without ETCS-i. It outlines a 10 step process: 1) analyze the customer's problem, 2) check and clear diagnostic trouble codes (DTCs), 3) confirm the symptom, 4) simulate the symptom if needed, 5) check for DTCs, 6) reference the DTC chart, 7) check for problem symptoms, 8) inspect circuits and input signals, 9) identify the problem, 10) perform a confirmation test or road test and clear DTCs if everything checks out. It directs the technician to specific pages in the manual for more details at each step.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    DI96

    Uploaded by

    Erln Lima
    26 views1 page
    This document provides instructions for troubleshooting a cruise control system without ETCS-i. It outlines a 10 step process: 1) analyze the customer's problem, 2) check and clear diagnostic trouble codes (DTCs), 3) confirm the symptom, 4) simulate the symptom if needed, 5) check for DTCs, 6) reference the DTC chart, 7) check for problem symptoms, 8) inspect circuits and input signals, 9) identify the problem, 10) perform a confirmation test or road test and clear DTCs if everything checks out. It directs the technician to specific pages in the manual for more details at each step.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for troubleshooting a cruise control system without ETCS-i. It outlines a 10 step process: 1) analyze the customer's problem, 2) check and clear diagnostic trouble codes (DTCs), 3) confirm the symptom, 4) simulate the symptom if needed, 5) check for DTCs, 6) reference the DTC chart, 7) check for problem symptoms, 8) inspect circuits and input signals, 9) identify the problem, 10) perform a confirmation test or road test and clear DTCs if everything checks out. It directs the technician to specific pages in the manual for more details at each step.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    26 views1 page

    DI96

    Uploaded by

    Erln Lima
    This document provides instructions for troubleshooting a cruise control system without ETCS-i. It outlines a 10 step process: 1) analyze the customer's problem, 2) check and clear diagnostic trouble codes (DTCs), 3) confirm the symptom, 4) simulate the symptom if needed, 5) check for DTCs, 6) reference the DTC chart, 7) check for problem symptoms, 8) inspect circuits and input signals, 9) identify the problem, 10) perform a confirmation test or road test and clear DTCs if everything checks out. It directs the technician to specific pages in the manual for more details at each step.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    DI–719

    DIAGNOSTICS – CRUISE CONTROL SYSTEM (w/o ETCS–i)

    CRUISE CONTROL SYSTEM (w/o ETCS–i)


    DI8Z7–02

    HOW TO PROCEED WITH TROUBLESHOOTING

    Troubleshooting in accordance with the procedure on the following pages.

    Vehicle Brought to Workshop


    Items inside are titles of pages in this
    manual with the page number indicated in the
    1 Customer Problem Analysis bottom portion. See the indicated pages
    P. DI–720 for detailed explanations.

    2 Check and Clear DTC (Pre–check)

    P. DI–721

    Symptom does not occur 4


    3 Symptom Simulation
    Problem Symptom Confirmation
    P. IN–18

    5 Normal code
    DTC Check
    P. DI–721
    Malfunction code

    6 7
    DTC Chart Problem Symptoms Table
    P. DI–726 P. DI–730

    9
    8 Input Signal Check
    Circuit Inspection
    Parts Inspection
    P. DI–733 – DI–751

    Identification of Problem

    Repair Step 2, 5, 8, 10: Diagnostic steps permitting the use of


    the TOYOTA hand–held tester.

    NG
    10
    Confirmation Test or Road Test* *: See next page
    OK

    Clear DTC
    End
    P. DI–721

    2003 TOYOTA TACOMA (RM1002U)

    Author: Date: 981

    You might also like