Scribd Logo
Upload

Welcome to Scribd!

  • 48 views

    DI75

    Uploaded by

    Erln Lima
    This document provides troubleshooting steps for diagnosing issues with a vehicle's cruise control system with ETCS-i. It begins by having technicians confirm customer reported problems and check and clear diagnostic trouble codes. If symptoms are present, technicians should simulate conditions to trigger symptom occurrence and check codes again. The diagnostic trouble code chart and problem symptoms table are then used to identify potential causes, followed by inspection of input signals, circuits, and parts. Once repairs are made, a confirmation test is completed to verify the issue is resolved.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    DI75

    Uploaded by

    Erln Lima
    48 views1 page
    This document provides troubleshooting steps for diagnosing issues with a vehicle's cruise control system with ETCS-i. It begins by having technicians confirm customer reported problems and check and clear diagnostic trouble codes. If symptoms are present, technicians should simulate conditions to trigger symptom occurrence and check codes again. The diagnostic trouble code chart and problem symptoms table are then used to identify potential causes, followed by inspection of input signals, circuits, and parts. Once repairs are made, a confirmation test is completed to verify the issue is resolved.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides troubleshooting steps for diagnosing issues with a vehicle's cruise control system with ETCS-i. It begins by having technicians confirm customer reported problems and check and clear diagnostic trouble codes. If symptoms are present, technicians should simulate conditions to trigger symptom occurrence and check codes again. The diagnostic trouble code chart and problem symptoms table are then used to identify potential causes, followed by inspection of input signals, circuits, and parts. Once repairs are made, a confirmation test is completed to verify the issue is resolved.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    48 views1 page

    DI75

    Uploaded by

    Erln Lima
    This document provides troubleshooting steps for diagnosing issues with a vehicle's cruise control system with ETCS-i. It begins by having technicians confirm customer reported problems and check and clear diagnostic trouble codes. If symptoms are present, technicians should simulate conditions to trigger symptom occurrence and check codes again. The diagnostic trouble code chart and problem symptoms table are then used to identify potential causes, followed by inspection of input signals, circuits, and parts. Once repairs are made, a confirmation test is completed to verify the issue is resolved.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    DI–689

    DIAGNOSTICS – CRUISE CONTROL SYSTEM (w/ ETCS–i)

    CRUISE CONTROL SYSTEM (w/ ETCS–i)


    DI663–04

    HOW TO PROCEED WITH TROUBLESHOOTING


    Troubleshooting in accordance with the procedure on the following pages.

    Vehicle Brought to Workshop


    Items inside are titles of pages in this
    manual with the page number indicated in the
    1 Customer Problem Analysis bottom portion. See the indicated pages for
    detailed explanations.
    P. DI–690

    2 Check and Clear DTC (Pre–check)


    P. DI–691

    Symptom does not occur 4


    3 Symptom Simulation
    Problem Symptom Confirmation
    P. IN–18
    Symptom occurs

    5 Normal code
    DTC Check
    P. DI–691

    Malfunction code
    6 7
    DTC Chart Problem Symptoms Table
    P. DI–697 P. DI–700

    9
    8 Input Signal Check
    Circuit Inspection
    Parts Inspection
    P. DI–701 – DI–715

    Identification of Problem

    Repair

    NG
    10 Confirmation Test
    Step 2, 5, 8, 10: Diagnostic steps permitting the use
    OK of the hand–held tester.

    End

    2003 TOYOTA TACOMA (RM1002U)

    Author: Date: 951

    You might also like