Scribd Logo
Upload

Welcome to Scribd!

  • 100 views

    Park/Neutral Position Switch Circuit (A/T)

    Uploaded by

    Erln Lima
    This document provides diagnostic steps to check the cruise control system on a 2003 Toyota Tacoma with an electronic throttle control system (ETCS-i). It describes the park/neutral position switch circuit which cancels cruise control when the transmission is not in the D position. The inspection procedure includes: 1. Checking for normal starter operation and engine starting 2. Checking the indicator light pattern with the park/neutral position switch on and off in different transmission positions 3. Measuring the voltage between the ECM connector and ground in D position and other positions 4. Checking the harness and connector between the ECM and park/neutral position switch

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Park/Neutral Position Switch Circuit (A/T)

    Uploaded by

    Erln Lima
    100 views3 pages
    This document provides diagnostic steps to check the cruise control system on a 2003 Toyota Tacoma with an electronic throttle control system (ETCS-i). It describes the park/neutral position switch circuit which cancels cruise control when the transmission is not in the D position. The inspection procedure includes: 1. Checking for normal starter operation and engine starting 2. Checking the indicator light pattern with the park/neutral position switch on and off in different transmission positions 3. Measuring the voltage between the ECM connector and ground in D position and other positions 4. Checking the harness and connector between the ECM and park/neutral position switch

    Original Title

    DI72

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides diagnostic steps to check the cruise control system on a 2003 Toyota Tacoma with an electronic throttle control system (ETCS-i). It describes the park/neutral position switch circuit which cancels cruise control when the transmission is not in the D position. The inspection procedure includes: 1. Checking for normal starter operation and engine starting 2. Checking the indicator light pattern with the park/neutral position switch on and off in different transmission positions 3. Measuring the voltage between the ECM connector and ground in D position and other positions 4. Checking the harness and connector between the ECM and park/neutral position switch

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    100 views3 pages

    Park/Neutral Position Switch Circuit (A/T)

    Uploaded by

    Erln Lima
    This document provides diagnostic steps to check the cruise control system on a 2003 Toyota Tacoma with an electronic throttle control system (ETCS-i). It describes the park/neutral position switch circuit which cancels cruise control when the transmission is not in the D position. The inspection procedure includes: 1. Checking for normal starter operation and engine starting 2. Checking the indicator light pattern with the park/neutral position switch on and off in different transmission positions 3. Measuring the voltage between the ECM connector and ground in D position and other positions 4. Checking the harness and connector between the ECM and park/neutral position switch

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    DI–707

    DIAGNOSTICS – CRUISE CONTROL SYSTEM (w/ ETCS–i)


    DI8ZM–04

    Park/Neutral Position Switch Circuit (A/T)

    CIRCUIT DESCRIPTION
    When the shift position is except D, a signal is sent from the park/neutral position switch to the ECM. When
    this signal is input during the cruise control driving, the ECM cancels the cruise control.

    WIRING DIAGRAM

    ECM

    P1
    Park/Neutral
    Position SW
    3 25
    B–R 3 D 7 B–W B–W
    IK3 E6 D
    From
    Ignition SW

    I26138

    INSPECTION PROCEDURE

    1 Check starter operation.

    CHECK:
    Check that the starter operates normally and that the engine starts.

    NG Proceed to engine troubleshooting.

    OK

    2003 TOYOTA TACOMA (RM1002U)

    Author: Date: 969


    DI–708
    DIAGNOSTICS – CRUISE CONTROL SYSTEM (w/ ETCS–i)

    2 Check input signal

    PREPARATION:
    Input Signal Indicator Light
    Blinking Pattern See the input signal check on page DI–691.
    CHECK:
    Turn PNP Switch ON SW ON Check the indicator light when shifting into positions except D.
    OFF (Shift to posi- Light OK:
    tions except D ) SW OFF
    OFF
    The indicator light goes off when shifting into posi-
    tions except D.

    OK Proceed to next circuit inspection shown in


    problem symptoms table (See page DI–700).

    NG

    3 Check voltage between terminal D of ECM connector and body ground.

    PREPARATION:
    Turn the ignition switch ON.
    E6
    CHECK:
    Measure the voltage between terminal E6–25 (D) of the ECM
    connector and the body ground when shifting into the D position
    and other positions.
    D (+) OK:
    Shift Position Voltage
    I25145
    D position 10 – 16 V
    Other positions Below 1 V

    OK Proceed to next circuit inspection shown in


    problem symptoms table (See page DI–700).

    NG

    2003 TOYOTA TACOMA (RM1002U)

    Author: Date: 970


    DI–709
    DIAGNOSTICS – CRUISE CONTROL SYSTEM (w/ ETCS–i)

    4 Check harness and connector between ECM and park/neutral position switch
    (See page IN–28).

    NG Repair or replace harness or connector.

    OK

    Check and replace cruise control ECU (See


    page IN–28).

    2003 TOYOTA TACOMA (RM1002U)

    Author: Date: 971

    You might also like