Scribd Logo
Upload

Welcome to Scribd!

  • 88 views

    RN-AC106-3A: Low Frequency Accelerometer, Side Connector, 500 MV/G

    Uploaded by

    kylegaze
    This document provides specifications for the RN-AC106-3A low frequency accelerometer. It has a sensitivity of 500 mV/g, frequency response between 0.2-2500 Hz, dynamic range of +10 g peak, and operates between -51 to 121 degrees Celsius. It is a PZT ceramic sensing element in a shear mode configuration housed in a 316L stainless steel case that is hermetically sealed.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    RN-AC106-3A: Low Frequency Accelerometer, Side Connector, 500 MV/G

    Uploaded by

    kylegaze
    88 views1 page
    This document provides specifications for the RN-AC106-3A low frequency accelerometer. It has a sensitivity of 500 mV/g, frequency response between 0.2-2500 Hz, dynamic range of +10 g peak, and operates between -51 to 121 degrees Celsius. It is a PZT ceramic sensing element in a shear mode configuration housed in a 316L stainless steel case that is hermetically sealed.

    Original Title

    RN-AC106-3A

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the RN-AC106-3A low frequency accelerometer. It has a sensitivity of 500 mV/g, frequency response between 0.2-2500 Hz, dynamic range of +10 g peak, and operates between -51 to 121 degrees Celsius. It is a PZT ceramic sensing element in a shear mode configuration housed in a 316L stainless steel case that is hermetically sealed.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    88 views1 page

    RN-AC106-3A: Low Frequency Accelerometer, Side Connector, 500 MV/G

    Uploaded by

    kylegaze
    This document provides specifications for the RN-AC106-3A low frequency accelerometer. It has a sensitivity of 500 mV/g, frequency response between 0.2-2500 Hz, dynamic range of +10 g peak, and operates between -51 to 121 degrees Celsius. It is a PZT ceramic sensing element in a shear mode configuration housed in a 316L stainless steel case that is hermetically sealed.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Low Frequency Accelerometer,

    RN-AC106-3A Side Connector, 500 mV/g

    Part Number RN-AC106-3A RN-M/AC106-3A


    Performance Specifications English Metric
    Sensitivity +/-10% 500 mV/g 500 mV/g
    Frequency Response
    +3 dB 12-150,000 CPM 0,2-2500 Hz
    +10% 24-90,000 CPM 0,4-1500 Hz
    +5% 30-59,400 CPM 0,5-990 Hz
    Dynamic Range +10 g peak +10 g peak
    Electrical
    Settling Time (Turn on Time)
    @ Room Temp (68°F/20°C) 6 Seconds 6 Seconds
    @ Max Temp (250°F/121°C) 8 Seconds 8 Seconds
    Power Requirement
    Voltage Source 18-30 VDC 18-30 VDC
    Constant Current Excitation 2-10 mA 2-10 mA
    Electrical Noise (Resolution)
    Broadband .00002 g rms .00002 g rms
    Output Impedance, Max <200 ohm <200 ohm
    Bias Output Voltage 10-14 VDC 10-14 VDC
    Electrical Case Isolation >108 ohm >108 ohm
    Recommended Cable Connectors A,B,C,D A,B,C,D
    Environmental
    Temperature Range -60 to 250° F -51 to 121° C
    Vibration Limit +10 g, pk +10 g, pk
    Maximum Shock Protection 3,000 g, pk 3000 g, pk
    Electromagnetic Sensitivity Pending Pending
    Sealing Welded, Hermetic Welded, Hermetic
    Physical
    Sensing Element PZT Ceramic PZT Ceramic
    Sensing Structure Shear Mode Shear Mode
    Weight 5.5 oz. 156 grams
    Case Material 316L Stainless Steel 316L Stainless Steel
    Mounting 1/4-28 M6x1
    Connector 2 Pin MIL-C-5015 2 Pin MIL-C-5015
    Mechanical
    Resonant Frequency 720,000 CPM 12000 Hz
    Mounting Torque 2 to 5 ft. lbs. 2,7 to 6,8 Nm
    Supplied Accessories
    Mounting Hardware 1/4-28 Captive Bolt M6x1 Captive Bolt
    Calibration Certificate CA10 CA10

    Optional Mounting Accessories Common Applications


    RN-MH107-1A / MH107-1B Quick Disconnect Receptacle / Base
    RN-MH114-3A / RN-MH115-2A Multi Purpose Magnetic Mounting Base Industries Served
    RN-MH117-1A / RN-MH117-1B Accelerometer Installation Tool Kit iAutomotive iManufacturing
    RN-MH119 Series Probe Tips iPharmaceutical iPower Generation
    RN-MH122-1A Flat Surface Magnetic Mounting Base iPulp and Paper iSteel
    RN-MH130-1A Adhesive Mounting Pad
    iWastewater Treatment

    Typical Frequency Response Typical Temperature Response Typical Applications


    iMixers iPumps
    iRolls, Slow Speed

    Measurement Type
    iPortable iPermanent Mount

    SEC of America, Inc. i 110A Pine Street i Shallotte, NC 28470


    Phone: 910-754-3220 i Fax: 910-754-3238

    You might also like