Scribd
Upload
65 views1 page

Eneryvoice

This document describes a programmable digital energy meter with voice response. The energy meter uses a microcontroller, current and voltage transducers, an ADC, and other components to accurately measure energy consumption. It displays readings on a 16x2 LCD screen and can announce readings using a voice chip. The meter is designed for single-phase domestic connections and offers improvements over traditional energy meters in accuracy, reliability, and user-friendliness.

Uploaded by

map281230
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
65 views1 page

Eneryvoice

This document describes a programmable digital energy meter with voice response. The energy meter uses a microcontroller, current and voltage transducers, an ADC, and other components to accurately measure energy consumption. It displays readings on a 16x2 LCD screen and can announce readings using a voice chip. The meter is designed for single-phase domestic connections and offers improvements over traditional energy meters in accuracy, reliability, and user-friendliness.

Uploaded by

map281230
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Mutech Infotracks

PROGRAMMABLE DIGITAL ENERGYMETER WITH VOICE RESPONSE

16 x 2 line LCD

Current
Transduc
er
Microcontroller VOICE
ADC AT 89C51 CHIP

Voltage
Transduc EEPROM
AT 24C08
er Keyboard

DESCRIPTION:
This is an energy meter designed to use in single-phase domestic connections. This meter
is free from inherent defects of ordinary ferry wheel energy meters used currently, such as low
accuracy, low reliability, lack of user friendliness & safety, etc. This energy meter is designed
around an AT89C51 microcontroller. The microcontroller is fed with samples from current and
voltage sensing elements, which are a current transformer, and a voltage transformer respectively.
This yields a high degree of accuracy and reliability. The very use of microcontroller allows
programmability, which is one of the most important and useful features of this meter.

The project consists of the following main parts. A current transformer, a voltage
transformer, an ADC, a micro controller unit, a keyboard, an EEPROM and a dual line LCD
module. The current transformer and the voltage transformer act as the input transducers. The
ADC takes the input analog values and converts it to its corresponding digital values. These
digital values are all taken up by the micro controller and processed. The instantaneous input
values can store in to an EEPROM through the micro controller. The keyboard is used to set the
tariff .The system also include a voice chip for announcing the readings on the display.

Koonamthai,Edapally P.O,Kochin-24, Email:[email protected], 1


Web:www.mutechinfotracks.com
Ph: +91 484 6411454, 9895347411, 9895336793, 9605477338

You might also like